CUSTOM FABRICATING & SUPPLIES

Transcription

1 CUSTOM FABRICATING & SULIES catalog 2018

2 TABLE OF CONTENTS SILICONE CAS OVERSIZED SILICONE CAS...8 SILICONE FLANGE CAS...9 SILICONE RECTANGULAR CAS...9 SELF FUSING SILICONE....9 SILICONE TAERED LUGS SILICONE HOLLOW TAERED LUGS SILICONE TAERED LUGS WITH HANDLES...11 SILICONE TUBE INSERT LUGS SILICONE WASHER LUGS...12 SILICONE THREAD MASK SILICONE STE LUGS SILICONE FLANGE LUGS SILICONE TAERED FLANGE LUGS SILICONE FLANGELESS LUGS SILICONE MULTI-TAERED LUGS SILICONE MOUSE TAILS LUG / CA KITS SILICONE ULL LUGS SILICONE WASHER ULL LUGS SILICONE FLANGE ULL LUGS...17 SILICONE USH WELD NUT LUGS SILICONE DUAL WASHER ULL LUGS SILICONE DUAL FLANGE ULL LUGS...18 SILICONE THREADED LUGS SILICONE CHAMFER ULL LUGS SILICONE LEADING ULL LUGS SILICONE TUBING SILICONE STAR TUBING SOLID SILICONE CORD (CONT D) SILICONE SONGE CORD...22 SILICONE SHEETING F 375 F OLYIMIDE TAES/GLASS CLOTH TAE...24 OLYIMIDE DISCS/GLASS CLOTH DISCS OLYESTER TAES OLYESTER DISCS OLYESTER TAES OLYESTER DISCS GREEN OLY TAB DISCS...30 GREEN OLYESTER DONUTS GREEN OLYESTER RECTANGLES...31 GREEN OLYESTER SQUARES EDM CAS...32 EDM TAERED LUGS EDM ULL LUGS F 180 F HIGH TEM CREE TAE INDUSTRIAL GRADE CREE TAE HIGH TEM CREE DISCS INDUSTRIAL GRADE CREE DISCS HIGH TEM CREE SQUARES HIGH TEM CREE RECTANGLES OLY FILM TAE MASK VINYL CAS ALUMINUM TAE Custom Fabricating & Supplies hone: Fax:

3 325 F 180 F (CONT D) HIGH TEM BLUE VINYL TAE LEAD FOIL TAE...40 ALUMINUM FOIL DISCS...41 LEAD FOIL DISCS...41 HIGH TEM GREEN VINYL...42 NON-ADHESIVE YELLOW VINYL VINYL TAE SELF THREADING LUGS M 325 F 170 F (CONT D) 3M471 VINYL TAE WITH RUBBER ADHESIVE M470 ELECTROLATING TAE M851 GREEN OLYESTER FILM TAE WITH A SILICONE/RUBBER ADHESIVE BLEND M764 YELLOW GENERAL UROSE VINYL TAE MVHB TM TAES M 325 F 170 F 3M8991 BLUE OLYESTER TAE M8992 GREEN OLYESTER TAE M2380 ERFORMANCE MASKING TAE M2693 GENERAL HIGH ERFORMANCE MASKING TAE M2364 GENERAL UROSE ERFORMANCE CREE MASKING TAE M2525 ERFORMANCE FLATBACK TAE M501+ REMIUM HIGH TEM HIGH ERFORMANCE CREE AER MASKING TAE M425 SILVER ALUMINUM FOIL TAE WITH A RESSURE SENSITIVE ACRYLIC ADHESIVE M2308 GENERAL UROSE ERFORMANCE MASKING TAE M401+ GREEN CREE AER MASKING TAE M421 DARK SILVER LEAD FOIL TAE WITH A GREEN RUBBER ADHESIVE M301+ YELLOW INDUSTRIAL STRENGTH MASKING TAE ROTECTION RODUCTS ROTECTION TAES OLYETHYLENE CA LUGS HIGH TEM GREEN CA LUGS...52 HIGH TEM SELF THREADING LUGS CUSTOM DIE CUTTING & MOLDING CUSTOM DIE CUTTING CUSTOM MOLDING D RINTING FLASH CUTTING ELASTOMER SELECTION GUIDE...60 HOOKS & MISC HOOKS...62 SWIVEL HOOKS CONVERSION CHART TERMS & CONDITIONS Order Online Same Day Shipping info@customfabricate.com

4 CUSTOM FABRICATING & SULIES Custom Fabricating & Supplies (CFS) was established in the year We started off in a small office in downtown Milwaukee. Our business grew rapidly and the need for more space was necessary. In 2003, CFS moved to its second facility located in South Milwaukee. By 2005, CFS was doing more and more custom work and doubled in size. That year we moved for a third time to Greendale, WI. We continued to expand our flexible converting capabilities, and in 2008 CFS became an approved 3M Converter. In 2013, CFS became an ISO 9001:2008 certified company. A credit to its staff, CFS continues to grow each year and in 2014 moved for a fourth time to our current 30,000 SQFT facility in Franklin, WI. lus we have four additional locations throughout the USA to help better serve you. Our goal has been the same since day one. To make sure YOU the customer are completely satisfied! We offer our customers excellent service, easy to apply design concepts and the best lead-times in the industry. Our staff is always available to assist you in any way. CFS wants to build partnerships with its customers so your success is our success. Our competitors might say the same things, but at CFS we do what we say. It s a personal guarantee each of our employees abides by at CFS. We must follow through and give the customer what they re expecting and always try to over deliver! We want to make a difference and help our customers grow. Let CFS work for you and give us an opportunity to earn your business. Sincerely, Henry Asik Vice resident

5 CONTENTS SILICONE CAS OVERSIZED SILICONE CAS... 8 SILICONE FLANGE CAS... 9 SILICONE RECTANGULAR CAS... 9 SELF FUSING SILICONE SILICONE TAERED LUGS SILICONE HOLLOW TAERED LUGS SILICONE TAERED LUGS WITH HANDLES SILICONE TUBE INSERT LUGS SILICONE WASHER LUGS SILICONE THREAD MASK SILICONE STE LUGS SILICONE FLANGE LUGS SILICONE TAERED FLANGE LUGS SILICONE FLANGELESS LUGS SILICONE MULTI-TAERED LUGS SILICONE MOUSE TAILS LUG / CA KITS SILICONE ULL LUGS SILICONE WASHER ULL LUGS SILICONE FLANGE ULL LUGS SILICONE USH WELD NUT LUGS SILICONE DUAL WASHER ULL LUGS SILICONE DUAL FLANGE ULL LUGS SILICONE THREADED LUGS SILICONE CHAMFER ULL LUGS SILICONE LEADING ULL LUGS SILICONE TUBING SILICONE STAR TUBING SOLID SILICONE CORD SILICONE SONGE CORD SILICONE SHEETING

6 SILICONE CAS Our Silicone Caps can be used for masking studs or pems. These caps are also color coded for easy identification and are reusable. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. ART NUMBER ID OD LONG COLOR QTY/BAG STUD SIZE SC Red 1000 SC White 1000 SC Blue 1000 SC Green 1000 SC Clear M2 SC Clear 1000 SC Gray SC ink 1000 SC White 1000 SC Dk. Red 1000 SC Dk. Blue M3 SC Lt. Gray M3 SC Yellow SC Gray SC Clear SC Lt. Blue SC Black SC Clear SC Clear 1000 SC White 1000 SC Clear 1000 SC Dk. Blue 1000 M4 SC Gray 1000 M4 SC ink 1000 M4 SC Lt. Gray SC Yellow SC Clear SC Gray SC Lt. Blue SC Clear SC Black 1000 M5 SC White SC Clear SC Clear SC Clear SC Clear 500 SC Clear 500 SC Yellow 500 SC Dk. Blue 500 M6 SC White 500 M6 SC Black 500 M6 SC ink 500 M6 SC White 500 1/4 20 SC Clear 500 1/4 20 SC Lt. Green 500 1/4 20 SC Yellow 500 1/4 20 SC Gray 500 SC Clear 500 SC Clear 500 SC Clear 500 SC Lt. Blue 500 5/16 18 SC Clear 500 5/16 18 SC Black 500 M8 SC Clear 500 SC Lt. Gray 500 M8 SC Clear 500 M8 SC Yellow Custom Fabricating & Supplies hone: Fax:

7 SILICONE CAS Tip For Use: ID of Cap should be approximately.02 smaller than thread or pem to be masked. ID OD LONG COLOR QTY/BAG STUD SIZE SC White 500 SC ink 500 SC Clear 500 SC Black 500 SC Clear 500 SC Clear 500 SC Clear 500 SC Lt. Green 500 3/8-16 SC Black 500 M10 SC Red 500 SC ink 500 M10 SC Yellow 500 M10 SC Gray 500 M10 SC Lt. Blue 500 7/16-14 SC Clear 500 SC Black 500 SC Clear 500 M12 SC ink 500 M12 SC Clear 500 M12 SC White 500 SC Clear 250 SC ink 500 1/2-13 SC Lt. Green 500 SC Clear 250 SC Yellow 250 M14 SC Gray 250 M14 SC Lt. Blue 250 M15 SC Black 250 M16 SC Clear 250 SC White 250 SC ink 250 SC White 250 SC Lt. Green 250 M19 SC Yellow 250 M20 SC Gray 250 M20 SC Lt. Blue 250 SC Black 250 SC Clear 250 SC Yellow 250 SC White 250 SC ink 250 SC Clear 250 SC Lt. Green 250 SC Yellow 250 SC Gray 100 SC Lt. Blue 100 SC Black 100 SC Clear 100 SC White 100 SC Clear 100 SC Clear 100 SC Clear 100 SC ink 100 SC Lt. Green 100 SC Clear 100 SC Clear 100 SC Yellow 100 SC Gray 100 SC Lt. Blue 100 Order Online Same Day Shipping 7

8 OVERSIZED SILICONE CAS These caps slide over threaded and non-threaded studs much easier than our standard caps. These caps can also be vented to avoid popping off or moving in the cure oven. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. ID LENGTH BOX/QTY OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC OSC Custom Fabricating & Supplies hone: Fax:

9 SILICONE FLANGE CAS These caps are designed to not only mask the stud or pem but also a perimeter around them. Most commonly used for ground applications. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. A B C D COLOR QTY/BAG FC Lt. Green 500 FC ink 500 FC Clear 500 FC Clear 500 FC Clear 500 FC Clear 500 FC Clear 500 FC Rusty Red 250 FC Clear 500 FC Clear 500 FC Red 500 FC Black 250 FC Red 500 FC Clear 250 FC Clear 250 FC Blue 250 FC Red 250 FC Grey 100 FC urple 250 SILICONE RECTANGULAR CAS These caps are ideal for masking grounding tabs used on electrical enclosures. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. A B C COLOR QTY/BAG SRC Clear 1000 SRC Red 1000 SRC Clear 1000 SRC Yellow 1000 SRC ink 1000 SELF FUSING SILICONE A Great Alternative To A Large Custom Cap Conform To Any Shape Excellent For Irregualr arts Fuses To Itself No Adhesive owder Coating E-Coating ainting 20 Mils Thick THICKNESS SIZE SAT x 36 ft SAT x 36 ft SAT x 36 ft SAT x 36 ft Order Online Same Day Shipping info@customfabricate.com 9

10 SILICONE TAERED LUGS Tapered plugs are most commonly used to protect blind holes and in some applications through holes as well. These plugs can be used on both threaded and non-threaded holes. lugs are also reusable and color coded for easy identification. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. TO BOTTOM LONG COLOR ST Blue 1000 ST Red 1000 ST Clear 1000 ST Clear 1000 ST100S Yellow 1000 ST Lt. Green 1000 ST ink 1000 ST101XL Dk. Green 1000 ST Clear 500 ST Green 500 ST Blue 1000 ST ink 500 ST Black 1000 ST102XL Yellow 1000 ST Blue 500 ST Red 1000 ST Red 1000 ST103XL Clear 1000 ST Yellow 100 ST104XL Red 1000 ST White 100 ST375XL Clear 500 ST White 500 ST Green 500 ST Blue 100 ST500S Brown 100 ST Clear 100 ST000XL White 100 ST500XL Clear 500 ST Red 100 ST107XL Rusty Red 500 ST urple 100 ST Lt. Green 100 ST Blue 100 ST ink 100 ST108XL Clear 250 ST Black 100 ST Red 100 ST Rusty Red 100 ST Yellow 100 ST Clear 100 ST Lt. Gray 100 ST Clear 100 ST Dk. Green 100 ST Clear 100 ST Lt. Blue 50 ST Clear 50 ST Green 25 ST Clear 25 ST Red 25 ST Clear 25 ST Green 25 ST Clear 25 ST Dk. Blue 25 ST Clear 25 ST Red 25 ST Green 10 ST Clear 10 ST Clear each ST Clear each ST Clear each 10 Custom Fabricating & Supplies hone: Fax: QTY/BAG

11 SILICONE HOLLOW TAERED LUGS Hollow Tapered lugs offer a more economical option to our large silicone tapered plugs. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D E QTY/BAG HT5-04 Lt. Green HT6-04 Dk. Green HT7-04 Dk. Blue HT8-04 Lt. Blue HT9-04 Red HT Green HT10-04 Clear HT11-04 Dk. Blue HT Dk. Green HT12-04 Red HT13-04 Lt. Blue HT urple HT Lt. Green HT14-04 White HT Gray HT15-04 Red HT16-04 Clear SILICONE TAERED LUGS WITH HANDLES These plugs are molded with a handle to assist in applying and removing to reduce time in masking. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. A B C D COLOR QTY/BAG ST101H ink 1000 ST102H Black 1000 ST103H Red 1000 ST104H Yellow 100 ST105H White 100 ST00H urple 100 ST108H Lt. Green 100 ST0H ink 100 ST2H Red 100 ST3H Yellow 100 ST4H Clear 100 ST6H Dk. Green 100 Order Online Same Day Shipping info@customfabricate.com 11

12 SILICONE TUBE INSERT LUGS Tube Insert lugs are designed to plug tubes and pipe ends. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. OD FLANGE LENGTH QTY/BAG TS TS TS TS TS TS TS TS TS TS TS SILICONE WASHER LUGS Washer lugs are designed to not only mask both threaded and non-threaded holes, but also a perimeter around them. Most commonly used for ground applications. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C QTY/BAG SW-380 Yellow SW-103 Yellow SW-M3 Gray SW-312A Blue SW-400 Black SW-312 Black SW-405 Clear SW-375 ink SW-412 Yellow SW-223 Clear SW-233 Clear SW-410 ink SW-M5 Clear SW-M6 Red SW-56 Blue SW-57 Red SW-155 Clear SW-500 White SW-275 Clear SW-75 Black SW-415 Lt. Gray SW-420 Dk. Blue SW-440 Yellow SW-M8 Black SW-576 Clear SW-M10 Yellow SW-866 White SW-M12 Clear SW-1180 Clear SW-1375 Clear Custom Fabricating & Supplies hone: Fax:

13 SILICONE THREAD MASK Thread Masks are specifically designed to protect the lead in threads and also have a handle to aid in placement and removal. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D QTY/BAG STM-M4 ink STM-M5 urple STM-M6 Clear STM-218 Yellow STM-278 Light Green STM-M8 Dark Blue STM-336 White STM-M10 ink STM-392 ink STM-M12 Red STM-451 Clear STM-462 Blue STM-M14 Grey STM-M16 Light Green STM-M20 Yellow STM-840 Clear SILICONE STE LUGS Step plugs can be used to mask both blind and through holes while also masking lead in threads and grounding areas. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D E QTY/BAG SS-M3 Lt. Blue SS-M4 Lt. Green SS-M5 urple SS-M6 Black SS-M8 White SILICONE FLANGE LUGS Flange plugs work well to plug both threaded and non-threaded holes where lead in chamfers must also be protected. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D E QTY/BAG SFC-M10 ink SFC-219 Clear SFC-M12 Clear SFC-M14 Grey Order Online Same Day Shipping info@customfabricate.com 13

14 SILICONE TAERED FLANGE LUGS Tapered Flange lugs are specifically designed to plug through holes while masking a perimeter around the hole. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D QTY/BAG TF0330 Clear TF0330S Blue TF0330-TF Red TF0450 Black TF0500 Yellow TF0800 Dk. Blue TF0749 Clear TF1150 urple TF1350 Red TF1480 Gray TF1600 Clear SILICONE FLANGELESS LUGS Flangeless lugs were designed to create a tighter seal for masking threaded holes. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C QTY/BAG SF0250 Clear SF0312 Black SF0406 Yellow SF0468 Clear SF0562 Lt. Blue SF0625 urple SF0718 Red SF0787 Lt. Green SF0866 Gray SF0945 Clear SF1024 Black SF1102 Dk. Green SILICONE MULTI-TAERED LUGS Our Multi tapered plugs offer a single plug that can be used for several different hole diameters. The handle saves time with placement and removing. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D E F QTY/BAG SMT-4 Blue SMT-8 Red SMT-10 Green SMT-24 Red Custom Fabricating & Supplies hone: Fax:

15 SILICONE MOUSE TAILS Mouse tails work great for small threaded and non threaded holes. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. A SMT SMT SMT SMT B QTY/BAG LUG / CA KITS These kits are a great tool that assist in determining the right size cap or plug for your application. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. ST-KIT SC-KIT S-KIT ML-KIT ET-KIT E-KIT Order Online Same Day Shipping info@customfabricate.com 15

16 SILICONE ULL LUGS ull lugs are specifically designed to mask through holes. Can be used for threaded and non-threaded, and are color coded for easy identification. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. ART COLOR NUMBER A B C D THREAD SIZE QTY/BAG S05 Clear S06 Clear / S07 ink /16 M2 500 S08 Lt. Gray /16 M2 500 S080 Blue /16 M2 500 S09 Yellow / S10 Gray / S11 Lt. Blue / S109 Green / S118 Red / S11A White / S14 Clear /8 500 S17 Lt. Gray /8 500 S17L Blue /8 500 S18 Yellow / S20 Gray / S158 Red / S22 Lt. Blue / S175 Gray S190 Green S190L Clear S23 Red /64 M5 500 S26 White /64 M5 500 S30 Clear /16 M6 500 S33 ink / S244 urple S37 Lt. Gray /4 500 S265 Clear S40 Yellow /64 M8 500 S40L White /64 M8 500 S281 Red S281L Clear S42 Gray / S43 White / S50 Clear / S375 Red S55 ink /8 M S55L Blue /8 M S388 Red /8 M S400 Green / S60 Lt. Gray / S60L Rusty S437 Blue S437XL Clear S66 White /2-13 M S67 Gray / S70 Lt. Blue / S73 White / S73L Lt. Green / S77 Clear /2 250 S80 ink /64 M S80L ink /64 M S85 Lt. Gray / S85L Green / S89 Yellow / S89L Clear S90 Gray /8 100 S670XL Clear S95 Lt. Blue / S97 White / S97L Red / S740 Clear S750S Clear S100 Clear /4 M S100L Clear /4 M S105 ink / S110 Lt. Gray /8 100 S896 Green S120 Yellow S120L Clear S140 Gray / Custom Fabricating & Supplies hone: Fax:

17 SILICONE WASHER ULL LUGS Washer ull lugs are used for masking through holes and a perimeter around them. Most commonly used for grounding areas. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D E F QTY/BAG SW-M3 Dk. Blue SW-M4 Dk. Green SW-165 urple SW-M5 Clear SW-197 Gray SW-394 Clear SW-500LT Clear SW-M6 White SW-M6XL Red SW-M8 Gray SW-M8XL Blue SW-M8SXL White SW-M10 Yellow SW-M12 ink SW-120 ink SW-285 Red SW-500 ink SW-562 Yellow SW-625 Green SW-688 Clear SW-812 Gray SW-445 Red SW-922 White SW-1060 Dk. Blue SW-1060XL White SILICONE FLANGE ULL LUGS Flange ull lugs are designed to mask threaded holes and offer additional protection for the lead in thread. Most commonly used for weld nuts. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D E QTY/BAG SF170 Clear SF205 White SF30 Blue SF33 Gray SF281 Yellow SF43 Orange SF50 ink SF414 Green SF67 urple SF490 White SF516 Gray Order Online Same Day Shipping info@customfabricate.com 17

18 SILICONE USH WELD NUT LUGS Our ush Weld Nut lugs are designed specifically for masking weld nuts. These plugs offer additional protection for both lead in and exit threads. These plugs are designed to work in applications where the back of the weld nut is not accessible. COLOR A B C D E QTY/BAG WN-M6 Neon Blue WN-M8 Neon Yellow WN-M10 Neon Rusty Red WN-M12 Neon Red WN-M16 Neon Orange SILICONE DUAL WASHER ULL LUGS Dual Washer ull lugs are designed specifically for masking weld nuts. These plugs offer additional protection for lead in and exit threads. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C QTY/BAG DW-M4 urple DW-M5 White DW-M6 Blue DW-M8 Yellow DW-M10 Green DW-M12 Red DW-M16 Green SILICONE DUAL FLANGE ULL LUGS Dual Flange ull lugs are designed specifically for masking weld nuts. These plugs offer additional protection for lead in and exit threads and can be easily removed by pulling through weld nut after coating. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D QTY/BAG DF-M5 Black DF-200 Dk. Green DF-M6 Lt. Green DF-M8XL Blue DF-M8 Red DF-270A White DF-335 Lt. Green DF-M10 Dk. Green DF-410 Gray DF-M12 urple DF-535 Red DF-M16 White DF-M20 Blue Custom Fabricating & Supplies hone: Fax:

19 SILICONE THREADED LUGS Our Threaded lugs are the perfect solution where a watertight seal is needed. Our lugs are strong enough to withstand pressure buildup, and can be easily inserted by hand. Our exclusive hex head design allows these plugs to be inserted with a power tool if desired. Course and Fine Threads are available. COLOR DIMENSIONS (FINE STANDARD) A B C QTY/BAG TF-138 Neon Red # TF-164 Neon ink # TF-190 Neon Orange # TF-190L Neon Green # TF-250 Neon Yellow 1/ TF-313 Neon Green 5/ TF-375 Neon Blue 3/ TF-500 Neon urple 1/ COLOR DIMENSIONS (FINE METRIC) A B C QTY/BAG TF-M6 Neon Orange M6 x TF-M8 Neon Yellow M8 x TF-M10 Neon Green M10 x TF-M12 Neon Blue M12 x COLOR DIMENSIONS (COARSE STANDARD) A B C QTY/BAG TC-138 Neon Green # TC-164 Neon Blue # TC-190 Neon urple # TC-250 Neon Red 1/ TC-313 Neon ink 5/ TC-375 Neon Orange 3/ TC-500 Neon Yellow 1/ TC-750 Neon Green 3/ COLOR DIMENSIONS (COARSE METRIC) A B C QTY/BAG TC-M6 Neon Blue M6 x TC-M8 Neon urple M8 x TC-M10 Neon Red M10 x TC-M12 Neon ink M12 x TC-M14 Neon Orange M14 x TC-M14L Neon Red M14 x Order Online Same Day Shipping info@customfabricate.com 19

20 SILICONE CHAMFER ULL LUGS Chamfer ull lugs are designed to mask both threaded and non-threaded holes while masking the lead in chamfer. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR A B C D E QTY/BAG SFC-220 Blue SFC-280 Clear SFC-360 Green SFC-440 White SFC-500 Red SILICONE LEADING ULL LUGS Leading ull lugs are specifically designed for masking weld nuts. These plugs offer additional protection for lead in and exit treads. They are a more rigid option for a tighter seal. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. A B C D E QTY/BAG SL-M SL-M SL-M SL-M SL-M SL-M Custom Fabricating & Supplies hone: Fax:

21 SILICONE TUBING Silicone tubing is ideal for masking long studs and pems. Tubing can be cut to any length, standard wall thickness is.062, but can also be special ordered to a.125 thickness. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. ID CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft CST ft OD LENGTH (FEET) SILICONE STAR TUBING Star Tubing is an alternative option to standard tubing and will slide on and off much easier than standard tubing. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR MINOR ID MAJOR OD LENGTH STAR-0200 White ft STAR-0300 Rusty Red ft STAR-0400 Yellow ft STAR-0500 urple ft STAR-0625 Rusty Red ft STAR-0725 Blue ft STAR-0850 White ft STAR-1000 Clear ft STAR-1250 urple ft STAR-1500 Rusty Red ft STAR-1750 Orange ft Order Online Same Day Shipping 21

22 SOLID SILICONE CORD Silicone Cord is ideal for masking grooved, slotted, and irregular shapes. Cord is also perfect for O-ring groove protection. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. ID LENGTH (FEET) SC ft SC ft SC ft SC ft SC ft SC ft SC ft SC ft SILICONE SONGE CORD Sponge Cord is a much softer/pliable alternative to the solid silicone cord. It can also be used to mask grooved, slotted, and irregular shapes. Sponge Cord is also perfect for O-ring groove protection. Works great for owder Coating, E-Coating, lating, Anodizing & ainting. COLOR SSC-0062 Blue ft SSC-0125 Black ft SSC-0187 Red ft SSC-0218 Red ft SSC-0250 Grey ft SSC-0312 Blue ft SSC-0375 White ft SSC-0437 Grey ft SSC-0500 Orange ft SSC-0625 Red ft SSC-0750 Grey ft SSC-0875 White ft SSC-1000 Red ft OD LENGTH SILICONE SHEETING Silicone Sheeting comes in a variety of thicknesses and can be custom die cut to your specifications. This product can also be purchased as individual sheets, and is available with or without adhesive. Recommended for owder Coating, E-Coating, lating, Anodizing & ainting. THICKNESS SIZE SSHT x 36 SSHT x 36 SSHT x 36 SSHT x 36 SSHT x 36 SSHT x 36 SSHT x 36 SSHT x Custom Fabricating & Supplies hone: Fax:

23 F CONTENTS OLYIMIDE TAES/GLASS CLOTH TAE OLYIMIDE DISCS/GLASS CLOTH DISCS OLYESTER TAES OLYESTER DISCS OLYESTER TAES OLYESTER DISCS GREEN OLY TAB DISCS GREEN OLYESTER DONUTS GREEN OLYESTER RECTANGLES GREEN OLYESTER SQUARES EDM CAS EDM TAERED LUGS EDM ULL LUGS... 34

24 F KT2 500 owder Coating E-Coating 2 Mil olyimide Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Fine Line Two Tone Application Clean Removal KT 500 owder Coating E-Coating 1 Mil olyimide Carrier 1.5 Mils Silicone Adhesive = 2.5 Mil Total Thickness Circuit Board Masking Clean Removal GCT 500 owder Coating E-Coating 3 Mil Glass Cloth Carrier 2 Mils Silicone Adhesive = 5 Mil Total Thickness Conformable Two Tone Application Clean Removal OLYIMIDE TAES/ GLASS CLOTH TAE 500 F 2 MIL OLYIMIDE TAE - KT2 1 MIL OLYIMIDE TAE - KT 5 MIL GLASS CLOTH TAE - GCT Additional sizes available. 2 MIL 1 MIL 5 MIL OLYIMIDE OLYIMIDE GLASS CLOTH ART ART ART CASE WIDTH WIDTH NUMBER NUMBER NUMBER QUANTITY INCHES MILLIMETERS KT KT-0125 GCT KT KT-0187 GCT KT KT-0250 GCT KT KT-0312 GCT KT KT-0375 GCT KT KT-0437 GCT KT KT-0500 GCT KT KT-0562 GCT KT KT-0625 GCT KT KT-0687 GCT KT KT-0750 GCT KT KT-0812 GCT KT KT-0875 GCT KT KT-0937 GCT KT KT-1000 GCT KT KT-1125 GCT KT KT-1250 GCT KT KT-1375 GCT KT KT-1500 GCT KT KT-1625 GCT KT KT-1750 GCT KT KT-1875 GCT KT KT-2000 GCT KT KT-2250 GCT KT KT-2500 GCT KT KT-2750 GCT KT KT-3000 GCT KT KT-3250 GCT KT KT-3500 GCT KT KT-4000 GCT KT KT-4500 GCT KT KT-5000 GCT KT KT-5500 GCT KT KT-6000 GCT KT KT-7000 GCT KT KT-8000 GCT KT KT-9000 GCT KT KT GCT KT KT GCT KT KT GCT Custom Fabricating & Supplies hone: Fax:

25 OLYIMIDE DISCS/ GLASS CLOTH DISCS 500 F 2 MIL OLYIMIDE DISC - KD2 1 MIL OLYIMIDE DISC - KD 5 MIL GLASS CLOTH DISC - GCD Additional sizes available. 2 MIL 1 MIL 5 MIL OLYIMIDE OLYIMIDE GLASS CLOTH ART ART ART ROLL DIAMETER DIAMETER NUMBER NUMBER NUMBER QUANTITY INCHES MILLIMETERS KD KD-0125 GCD KD KD-0156 GCD KD KD-0187 GCD KD KD-0218 GCD KD KD-0250 GCD KD KD-0281 GCD KD KD-0312 GCD KD KD-0375 GCD KD KD-0400 GCD KD KD-0437 GCD KD KD-0500 GCD KD KD-0562 GCD KD KD-0625 GCD KD KD-0687 GCD KD KD-0750 GCD KD KD-0812 GCD KD KD-0875 GCD KD KD-0937 GCD KD KD-1000 GCD KD KD-1062 GCD KD KD-1125 GCD KD KD-1187 GCD KD KD-1250 GCD KD KD-1312 GCD KD KD-1375 GCD KD KD-1437 GCD KD KD-1500 GCD KD KD-1625 GCD KD KD-1750 GCD KD KD-1812 GCD KD KD-1875 GCD KD KD-2000 GCD KD KD-2250 GCD KD KD-2375 GCD KD KD-2500 GCD KD KD-2750 GCD KD KD-3000 GCD KD KD-3250 GCD KD KD-3500 GCD KD KD-3750 GCD KD KD-4000 GCD KD KD-4250 GCD KD KD-4500 GCD KD KD-5000 GCD KD KD-5500 GCD KD KD-6000 GCD KD2 500 owder Coating E-Coating 2 Mil olyimide Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Fine Line Two Tone Application Clean Removal KD 500 owder Coating E-Coating 1 Mil olyimide Carrier 1.5 Mils Silicone Adhesive = 2.5 Mil Total Thickness Circuit Board Masking Clean Removal GCD 500 owder Coating E-Coating 3 Mil Glass Cloth Carrier 2 Mils Silicone Adhesive = 5 Mil Total Thickness Conformable Two Tone Application Clean Removal F Order Online Same Day Shipping info@customfabricate.com 25

26 F OT 425 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Low Shrink Backing Transparent Clean Removal RR 425 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Low Shrink Clean Removal OLYESTER TAES 425 F 2 MIL ORANGE OLYESTER TAE - OT 2 MIL RUSTY RED OLYESTER TAE - RR 1 MIL RED OLYESTER TAE - RT Additional sizes available. 2 MIL 2 MIL RUSTY 1 MIL ORANGE OLY RED OLY RED OLY ART ART ART CASE WIDTH WIDTH NUMBER NUMBER NUMBER QUANTITY INCHES MILLIMETERS OT-0125 RR-0125 RT OT-0187 RR-0187 RT OT-0250 RR-0250 RT OT-0312 RR-0312 RT OT-0375 RR-0375 RT OT-0437 RR-0437 RT OT-0500 RR-0500 RT OT-0562 RR-0562 RT OT-0625 RR-0625 RT OT-0687 RR-0687 RT OT-0750 RR-0750 RT OT-0812 RR-0812 RT OT-0875 RR-0875 RT OT-0937 RR-0937 RT OT-1000 RR-1000 RT OT-1125 RR-1125 RT OT-1250 RR-1250 RT OT-1375 RR-1375 RT OT-1500 RR-1500 RT OT-1625 RR-1625 RT OT-1750 RR-1750 RT OT-1875 RR-1875 RT OT-2000 RR-2000 RT OT-2250 RR-2250 RT OT-2500 RR-2500 RT OT-2750 RR-2750 RT OT-3000 RR-3000 RT OT-3250 RR-3250 RT OT-3500 RR-3500 RT OT-4000 RR-4000 RT OT-4500 RR-4500 RT OT-5000 RR-5000 RT OT-5500 RR-5500 RT OT-6000 RR-6000 RT OT-7000 RR-7000 RT OT-8000 RR-8000 RT OT-9000 RR-9000 RT OT RR RT OT RR RT OT RR RT RT 425 owder Coating E-Coating 1 Mil olyester Carrier 3 Mils Silicone Adhesive = 4 Mil Total Thickness Conformable Sharp Line Definition Clean Removal 26 Custom Fabricating & Supplies hone: Fax:

27 OLYESTER DISCS 425 F 2 MIL ORANGE OLYESTER DISC - OD 2 MIL RUSTY RED OLYESTER DISC - RRD 1 MIL RED OLYESTER DISC - RD Additional sizes available. 2 MIL 2 MIL RUSTY 1 MIL ORANGE OLY RED OLY RED OLY ART ART ART ROLL DIAMETER DIAMETER NUMBER NUMBER NUMBER QUANTITY INCHES MILLIMETERS OD-0125 RRD-0125 RD OD-0156 RRD-0156 RD OD-0187 RRD-0187 RD OD-0218 RRD-0218 RD OD-0250 RRD-0250 RD OD-0281 RRD-0281 RD OD-0312 RRD-0312 RD OD-0375 RRD-0375 RD OD-0400 RRD-0400 RD OD-0437 RRD-0437 RD OD-0500 RRD-0500 RD OD-0562 RRD-0562 RD OD-0625 RRD-0625 RD OD-0687 RRD-0687 RD OD-0750 RRD-0750 RD OD-0812 RRD-0812 RD OD-0875 RRD-0875 RD OD-0937 RRD-0937 RD OD-1000 RRD-1000 RD OD-1062 RRD-1062 RD OD-1125 RRD-1125 RD OD-1187 RRD-1187 RD OD-1250 RRD-1250 RD OD-1312 RRD-1312 RD OD-1375 RRD-1375 RD OD-1437 RRD1437 RD OD-1500 RRD1500 RD OD-1625 RRD-1625 RD OD-1750 RRD-1750 RD OD-1812 RRD-1812 RD OD-1875 RRD-1875 RD OD-2000 RRD-2000 RD OD-2250 RRD-2250 RD OD-2375 RRD-2375 RD OD-2500 RRD-2500 RD OD-2750 RRD-2750 RD OD-3000 RRD-3000 RD OD-3250 RRD-3250 RD OD-3500 RRD-3500 RD OD-3750 RRD-3750 RD OD-4000 RRD-4000 RD OD-4250 RRD-4250 RD OD-4500 RRD-4500 RD OD-5000 RRD-5000 RD OD-5500 RRD-5500 RD OD-6000 RRD-6000 RD OD 425 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Low Shrink Backing Transparent Clean Removal RRD 425 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Low Shrink Clean Removal RD 425 owder Coating E-Coating 1 Mil olyester Carrier 3 Mils Silicone Adhesive = 4 Mil Total Thickness Conformable Sharp Line Definition Clean Removal F Order Online Same Day Shipping info@customfabricate.com 27

28 F GT owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Clean Removal BT 400 owder Coating E-Coating 1 Mil olyester Carrier 2 Mils Silicone Adhesive = 3 Mil Total Thickness Conformable to roducts Clean Removal BT owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Lower & Shorter Bake Cycles Clean Removal OLYESTER TAES F 2 MIL GREEN OLYESTER TAE - GT215 1 MIL BLUE OLYESTER TAE - BT 2 MIL BLUE OLYESTER TAE - BT21 Additional sizes available. 2 MIL GREEN 1 MIL BLUE 2 MIL BLUE OLYESTER OLYESTER OLYESTER ART ART ART CASE WIDTH WIDTH NUMBER NUMBER NUMBER QUANTITY INCHES MILLIMETERS GT BT-0125 BT GT BT-0187 BT GT BT-0250 BT GT BT BT GT BT-0375 BT GT BT-0437 BT GT BT-0500 BT GT BT-0562 BT GT BT-0625 BT GT BT-0687 BT GT BT-0750 BT GT BT-0812 BT GT BT-0875 BT GT BT-0937 BT GT BT-1000 BT GT BT-1125 BT GT BT-1250 BT GT BT-1375 BT GT BT-1500 BT GT BT-1625 BT GT BT-1750 BT GT BT-1875 BT GT BT-2000 BT GT BT-2250 BT GT BT-2500 BT GT BT-2750 BT GT BT-3000 BT GT BT-3250 BT GT BT-3500 BT GT BT-4000 BT GT BT-4500 BT GT BT-5000 BT GT BT-5500 BT GT BT-6000 BT GT BT-7000 BT GT BT-8000 BT GT BT-9000 BT G2T BT BT GT BT BT GT BT BT Custom Fabricating & Supplies hone: Fax:

29 OLYESTER DISCS F 2 MIL GREEN OLYESTER DISCS - GD 1 MIL BLUE OLYESTER DISCS - BD 2 MIL BLUE OLYESTER DISCS - BD21 Additional sizes available. 2 MIL GREEN 1 MIL BLUE 2 MIL BLUE OLYESTER OLYESTER OLYESTER ART ART ART ROLL DIAMETER DIAMETER NUMBER NUMBER NUMBER QUANTITY INCHES MILLIMETERS GD0125 BD0125 BD GD0156 BD0156 BD GD0187 BD0187 BD GD0218 BD0218 BD GD0250 BD0250 BD GD0281 BD0281 BD GD0312 BD0312 BD GD0375 BD0375 BD GD0400 BD0400 BD GD0437 BD0437 BD GD0500 BD0500 BD GD0562 BD0562 BD GD0625 BD0625 BD GD0687 BD0687 BD GD0750 BD0750 BD GD0812 BD0812 BD GD0875 BD0875 BD GD0937 BD0937 BD GD1000 BD1000 BD GD1062 BD1062 BD GD1125 BD1125 BD GD1187 BD1187 BD GD1250 BD1250 BD GD1312 BD1312 BD GD1375 BD1375 BD GD1437 BD1437 BD GD1500 BD1500 BD GD1625 BD1625 BD GD1750 BD1750 BD GD1812 BD1812 BD GD1875 BD1875 BD GD2000 BD2000 BD GD2250 BD2250 BD GD2375 BD2375 BD GD2500 BD2500 BD GD2750 BD2750 BD GD3000 BD3000 BD GD3250 BD3250 BD GD3500 BD3500 BD GD3750 BD3750 BD GD4000 BD4000 BD GD4250 BD4250 BD GD4500 BD4500 BD GD5000 BD5000 BD GD5500 BD5500 BD GD6000 BD6000 BD GD 400 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Clean Removal BD 400 owder Coating E-Coating 1 Mil olyester Carrier 2 Mils Silicone Adhesive = 3 Mil Total Thickness Conformable to roducts Clean Removal BD owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Lower & Shorter Bake Cycles Clean Removal F Order Online Same Day Shipping info@customfabricate.com 29

30 F GTAB 400 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Clean Removal GREEN OLY TAB DISCS 400 F Our GTAB Discs series work great for applications where speed and precision are critical. While the tab makes it much easier to place and remove, half of each of these discs are 100% transparent offering a clear visual for placement. Our GTAB Discs also offer a seamless design which provides a leak proof seal for E-coating, lating, and Anodizing! TAB DISCS ROLL DIAMETER DIAMETER QUANTITY INCHES MILLIMETERS GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB GTAB Custom Fabricating & Supplies hone: Fax:

31 GREEN OLYESTER DONUTS 400 F Additional sizes available. ART ROLL ID ID OD OD NUMBER QUANTITY INCHES MILLIMETERS INCHES MILLIMETERS GWD0125X GWD0187X GWD0250X GWD0250X GWD0250X GWD0250X GWD0250X GWD0375X GWD0375X GWD0500X GWD0500X GWD 400 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Clean Removal F GREEN OLYESTER RECTANGLES 400 F Additional sizes available. ART ROLL LENGTH LENGTH WIDTH WIDTH NUMBER QUANTITY INCHES MILLIMETERS INCHES MILLIMETERS GRT250X GRT250X GRT250X GRT500X GRT500X GRT750X GRT1000X GRT1000X GRT1000X GRT1500X GRT1500X GRT2000X GRT2000X GRT 400 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Clean Removal GREEN OLYESTER SQUARES 400 F Additional sizes available. ART ROLL LENGTH LENGTH WIDTH WIDTH NUMBER QUANTITY INCHES MILLIMETERS INCHES MILLIMETERS GSQ GSQ GSQ GSQ GSQ GSQ GSQ GSQ GSQ GSQ GSQ GSQ GSQ 400 owder Coating E-Coating 2 Mil olyester Carrier 1.5 Mils Silicone Adhesive = 3.5 Mil Total Thickness Clean Removal Order Online Same Day Shipping info@customfabricate.com 31

32 F EDM CAS 375 F EDM Caps can be used for masking studs or pems. These caps are also reusable. Works great for Anodizing, ainting & lating. ID OD LENGTH QTY/BAG EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC EC Custom Fabricating & Supplies hone: Fax:

33 EDM TAERED LUGS 375 F Tapered lugs are most commonly used to protect blind holes and in some applications through holes as well. These plugs can be used on both threaded and non-threaded holes. The Tapered lugs are also reusable. Recommended for Anodizing, ainting & lating. TO BOTTOM LONG QTY/BAG ET ET ET ET101XL ET ET102XL ET ET103XL ET ET104XL ET ET375XL ET ET000XL ET ET500XL ET ET107XL ET ET ET ET ET ET ET ET ET ET ET ET ET ET ET ET ET ET ET ET ET each ET each ET each ET each F Order Online Same Day Shipping info@customfabricate.com 33

34 F EDM ULL LUGS 375 F ull lugs are specifically designed to mask through holes. Can be used for threaded and non threaded holes. The ull lugs are also reusable. Works great for Anodizing, ainting & lating. A B C D E E E E E E E11A E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E QTY/BAG 34 Custom Fabricating & Supplies hone: Fax:

35 F CONTENTS HIGH TEM CREE TAE INDUSTRIAL GRADE CREE TAE HIGH TEM CREE DISCS INDUSTRIAL GRADE CREE DISCS.. 37 HIGH TEM CREE SQUARES HIGH TEM CREE RECTANGLES OLY FILM TAE MASK VINYL CAS ALUMINUM TAE HIGH TEM BLUE VINYL TAE LEAD FOIL TAE ALUMINUM FOIL DISCS LEAD FOIL DISCS HIGH TEM GREEN VINYL NON-ADHESIVE YELLOW VINYL VINYL TAE SELF THREADING LUGS

36 F HTC 325 ainting 7.5 Mils Thick ressure Sensitive Masking Tape Clean Removal ICT 225 ainting All urpose Tape For Non-Critical Applications 5.3 Mils Thick ressure Sensitive Masking Tape Clean Removal HIGH TEM CREE TAE 325 F Additional sizes available. HIGH TEM CREE INDUSTRIAL GRADE CREE INDUSTRIAL GRADE CREE TAE 225 F Additional sizes available. ART ART CASE WIDTH WIDTH NUMBER NUMBER QUANTITY INCHES MILLIMETERS HTC-0125 ICT HTC-0187 ICT HTC-0250 ICT HTC-0312 ICT HTC-0375 ICT HTC-0437 ICT HTC-0500 ICT HTC-0562 ICT HTC-0625 ICT HTC-0687 ICT HTC-18MM ICT-18MM HTC-0750 ICT HTC-0812 ICT HTC-0875 ICT HTC-0937 ICT HTC-24MM ICT-24MM HTC-1000 ICT HTC-1125 ICT HTC-1250 ICT HTC-1375 ICT HTC-36MM ICT-36MM HTC-1500 ICT HTC-1625 ICT HTC-1750 ICT HTC-1875 ICT HTC-48MM ICT-48MM HTC-2000 ICT HTC-2250 ICT HTC-2500 ICT HTC-2750 ICT HTC-72MM ICT-72MM HTC-3000 ICT HTC-3250 ICT HTC-3500 ICT HTC-4000 ICT HTC-4500 ICT HTC-5000 ICT HTC-5500 ICT HTC-6000 ICT HTC-7000 ICT HTC-8000 ICT HTC-9000 ICT HTC ICT HTC ICT HTC ICT Custom Fabricating & Supplies hone: Fax:

37 HIGH TEM CREE DISCS 325 F Additional sizes available. HIGH TEM CREE DISCS INDUSTRIAL CREE DISCS INDUSTRIAL GRADE CREE DISCS 225 F Additional sizes available. ART ART ROLL DIAMETER DIAMETER NUMBER NUMBER QUANTITY INCHES MILLIMETERS HCD0125 LCD HCD0156 LCD HCD0187 LCD HCD0218 LCD HCD0250 LCD HCD0281 LCD HCD0312 LCD HCD0375 LCD HCD0400 LCD HCD0437 LCD HCD0500 LCD HCD0562 LCD HCD0625 LCD HCD0687 LCD HCD0750 LCD HCD0812 LCD HCD0875 LCD HCD0937 LCD HCD1000 LCD HCD1062 LCD HCD1125 LCD HCD1187 LCD HCD1250 LCD HCD1312 LCD HCD1375 LCD HCD1437 LCD HCD1500 LCD HCD1562 LCD HCD1625 LCD HCD1687 LCD HCD1750 LCD HCD1812 LCD HCD1875 LCD HCD1937 LCD HCD2000 LCD HCD2125 LCD HCD2250 LCD HCD2375 LCD HCD2500 LCD HCD2625 LCD HCD2750 LCD HCD2875 LCD HCD3000 LCD HCD3250 LCD HCD3500 LCD HCD3625 LCD HCD3750 LCD HCD4000 LCD HCD4250 LCD HCD4500 LCD HCD5000 LCD HCD5250 LCD HCD5500 LCD HCD5750 LCD HCD6000 LCD HCD 325 ainting 7.5 Mils Thick ressure Sensitive Masking Tape Clean Removal LCD 225 ainting All urpose Tape For Non-Critical Applications 5.3 Mils Thick ressure Sensitive Masking Tape Clean Removal F Order Online Same Day Shipping info@customfabricate.com 37

38 F HTSQ 325 ainting 7.5 Mils Thick ressure Sensitive Masking Tape Clean Removal HIGH TEM CREE SQUARES 325 F Additional sizes available. Also available in Industrial Crepe Tape. ART ROLL LENGTH LENGTH WIDTH WIDTH NUMBER QUANTITY INCHES MILLIMETERS INCHES MILLIMETERS HTSQ HTSQ HTSQ HTSQ HTSQ HTSQ HTSQ HTSQ HTSQ HTSQ HTSQ HTSQ HIGH TEM CREE RECTANGLES 325 F Additional sizes available. Also available in Industrial Crepe Tape. HTR 325 ainting 7.5 Mils Thick ressure Sensitive Masking Tape Clean Removal ART ROLL LENGTH LENGTH WIDTH WIDTH NUMBER QUANTITY INCHES MILLIMETERS INCHES MILLIMETERS HTRT250X HTRT250X HTRT250X HTRT500X HTRT500X HTRT750X HTRT1000X HTRT1000X HTRT1000X HTRT1500X HTRT1500X HTRT2000X HTRT2000X OLY FILM TAE MASK 300 F Additional sizes available. We can produce this product in any size and we do offer a High Temp version. TFM 300 ainting Great Conformability No Residue OLY FILM MASK WIDTH WIDTH INCHES MILLIMETERS TFM TFM TFM TFM TFM TFM TFM Custom Fabricating & Supplies hone: Fax:

39 VINYL CAS 275 F Vinyl Caps can be used for masking studs or pems. These caps are also color coded for easy identification and are reusable. Recommended for Anodizing, ainting & lating. ID OD LONG QTY/BAG VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC VC F Order Online Same Day Shipping info@customfabricate.com 39

40 F AFT 300 lating ainting 3 Mils Thick Thermally Conductive Moisture & Chemical Resistance ALUMINUM TAE 300 F Additional sizes available. ART CASE WIDTH WIDTH NUMBER QUANTITY INCHES MILLIMETERS AFT AFT AFT AFT AFT AFT AFT AFT AFT AFT AFT AFT HIGH TEM BLUE VINYL TAE 300 F Additional sizes available. HTBV 300 lating 5.5 Mils Thick Solvent Resistant High Temperature erformance ART CASE WIDTH WIDTH NUMBER QUANTITY INCHES MILLIMETERS HTBV HTBV HTBV HTBV HTBV LEAD FOIL TAE 255 F Additional sizes available. LFT 255 Chrome lating Nickel lating 6 Mils Thick Electrically Conductive Acid Resistant ART CASE WIDTH WIDTH NUMBER QUANTITY INCHES MILLIMETERS LFT LFT LFT LFT LFT LFT LFT LFT LFT LFT LFT LFT LFT LFT LFT Custom Fabricating & Supplies hone: Fax:

41 ALUMINUM FOIL DISCS 300 F Additional sizes available. ALUMINUM FOIL DISCS LEAD FOIL DISCS LEAD FOIL DISCS 255 F Additional sizes available. ART ART ROLL DIAMETER DIAMETER NUMBER NUMBER QUANTITY INCHES MILLIMETERS AFD0125 LFD AFD0156 LFD AFD0187 LFD AFD0218 LFD AFD0250 LFD AFD0281 LFD AFD0312 LFD AFD0375 LFD AFD0400 LFD AFD0437 LFD AFD0500 LFD AFD0562 LFD AFD0625 LFD AFD0687 LFD AFD0750 LFD AFD0812 LFD AFD0875 LFD AFD0937 LFD AFD1000 LFD AFD1062 LFD AFD1125 LFD AFD1187 LFD AFD1250 LFD AFD1312 LFD AFD1375 LFD AFD1437 LFD AFD1500 LFD AFD1625 LFD AFD1750 LFD AFD1812 LFD AFD1875 LFD AFD2000 LFD AFD3000 LFD AFD4000 LFD AFD5000 LFD AFD5250 LFD AFD6000 LFD AFD 300 lating ainting 3 Mils Thick Thermally Conductive Moisture & Chemical Resistance LFD 255 Chrome lating Nickel lating 6 Mils Thick Electrically Conductive Acid Resistant F Order Online Same Day Shipping info@customfabricate.com 41

42 F HTGV 220 lating 6 Mils Thick Solvent Resistant HIGH TEM GREEN VINYL 220 F Additional sizes available. ROLL SIZE ROLLS/CASE HTGV x 60 yds 96 HTGV x 60 yds 48 HTGV x 60 yds 48 HTGV x 60 yds 36 HTGV x 60 yds 24 HTGV X 60 yds 8 NON-ADHESIVE YELLOW VINYL 180 F Additional sizes available. NAV 180 lating Overlap For Water Tight Seal No Adhesive No Residue ROLL SIZE ROLLS/CASE NAV x 500 ft 72 NAV x 500 ft 48 NAV x 500 ft 36 NAV x 500 ft 32 NAV x 500 ft 24 NAV x 500 ft Custom Fabricating & Supplies hone: Fax:

43 VINYL TAE 180 F Additional sizes available. AVAILABLE IN 9 COLORS ROLL SIZE ROLLS/CASE YELLOW VC x 36 yds 72 RED VC x 36 yds 48 GREEN VC x 36 yds 36 VC x 36 yds 24 DARK GREEN VC x 36 yds 24 VC x 36 yds 12 BLUE VC x 36 yds 12 URLE VC VC x 36 yds 5.00 x 36 yds 8 8 VC VC x 36 yds 5.50 x 36 yds 8 8 BROWN BLACK VC x 36 yds 8 GRAY F VC6 180 lating ainting 6 Mils Thick Conforms To Irregular Surface Clean Removal Order Online Same Day Shipping info@customfabricate.com 43

44 F SELF THREADING LUGS 180 F Self Threading lugs are ideal for threaded holes. The self taping ability creates a leak proof seal. Works great for Anodizing, ainting & lating. A B C QTY/BAG LDE LDE LDE LDE LDE LDE LDE LDE LDE LDE LDE LDE LDE Custom Fabricating & Supplies hone: Fax:

45 3M F CONTENTS 3M8991 BLUE OLYESTER TAE M8992 GREEN OLYESTER TAE M2380 ERFORMANCE MASKING TAE M2693 GENERAL HIGH ERFORMANCE MASKING TAE M2364 GENERAL UROSE ERFORMANCE CREE MASKING TAE M2525 ERFORMANCE FLATBACK TAE M501+ REMIUM HIGH TEM HIGH ERFORMANCE CREE AER MASKING TAE M425 SILVER ALUMINUM FOIL TAE WITH A RESSURE SENSITIVE ACRYLIC ADHESIVE M2308 GENERAL UROSE ERFORMANCE MASKING TAE M401+ GREEN CREE AER MASKING TAE M421 DARK SILVER LEAD FOIL TAE WITH A GREEN RUBBER ADHESIVE M301+ YELLOW INDUSTRIAL STRENGTH MASKING TAE M471 VINYL TAE WITH RUBBER ADHESIVE M470 ELECTROLATING TAE M851 GREEN OLYESTER FILM TAE WITH A SILICONE/RUBBER ADHESIVE BLEND M764 YELLOW GENERAL UROSE VINYL TAE MVHB TM TAES

46 3M F ALL 3M STOCK CAN BE CUT TO SIZE 3M F BLUE OLYESTER TAE 1 Mil Blue olyester Tape with a silicone adhesive is a thin and conformable general purpose polyester tape. It offers clean removal and excellent thermal and chemical resist ance while maintaining flexibliity. Works great for the following applications: Anodizing, E-Coating, Electroplating & owder Coating. 3M F GREEN OLYESTER TAE Removes cleanly, high tensile strength. 3M F ERFORMANCE MASKING TAE Suitable for most paint masking applications. Industrial use, excellent conformability and easy tear. Removes easily. 3M F GENERAL HIGH ERFORMANCE MASKING TAE This High erformance Masking Tape has a synthetic rubber adhesive that offers a latex-free alternative, smooth crepe paper backing conforms and maintains strength when formed around corners. Great for high erformace ainting. 46 Custom Fabricating & Supplies hone: Fax:

47 ALL 3M STOCK CAN BE CUT TO SIZE 3M F GENERAL UROSE ERFORMANCE CREE MASKING TAE Rubber adhesive, good holding power, great for general masking applications. 3M F 3M F ERFORMANCE FLATBACK TAE This 9.5 mil Orange erformance Flatback Tape has a rubber adhesive, excellent adhesion and backing strength levels, and is resistant to moist conditions. Can be used in many holding, masking & splicing applications where a high visibility tape is desired. 3M F REMIUM HIGH TEM HIGH ERFORMANCE CREE AER MASKING TAE Super-sharp paint lines, easy removal. 3M F SILVER ALUMINUM FOIL TAE WITH A RESSURE SENSITIVE ACRYLIC ADHESIVE Excellent heat and light reflection to protect against high temps and U.V. degradation. Order Online Same Day Shipping info@customfabricate.com 47

48 3M F ALL 3M STOCK CAN BE CUT TO SIZE 3M F GENERAL UROSE ERFORMANCE MASKING TAE Rubber adhesive, pressure-sensitive tape works great for general paint masking, sealing, and bundling. 3M F GREEN CREE AER MASKING TAE Ideal for critical paint masking applications in the automotive, specialty vehicle and industrial markets where high temp & strong holding performance is required. Delivers sharp paint lines. 3M F DARK SILVER LEAD FOIL TAE WITH A GREEN RUBBER ADHESIVE Used as a moisture and radiation barrier in certain applications. Good conformability having electrically & thermally conductive properties. 3M F YELLOW INDUSTRIAL STRENGTH MASKING TAE Sticks to metal, rubber, glass, and plastic. Removes easily to create sharp paint lines. 48 Custom Fabricating & Supplies hone: Fax:

49 ALL 3M STOCK CAN BE CUT TO SIZE 3M F VINYL TAE WITH RUBBER ADHESIVE Ideal for lane and safety markings, color coding, abrasion protecting, and masking. 3M F 3M F ELECTROLATING TAE Excellent chemical resistance, very abrasive and conformable. 3M F GREEN OLYESTER FILM TAE WITH A SILICONE/RUBBER ADHESIVE BLEND Unique conformable adhesive for printed circuit board masking. 3M F YELLOW GENERAL UROSE VINYL TAE Rubber adhesive, with good instant adhesion. Works great for non-critical applications color coding, temporary marking of parts or machines, protecting parts, equipment or products from abrasion. Order Online Same Day Shipping info@customfabricate.com 49

50 3M F ALL 3M STOCK CAN BE CUT TO SIZE TM 3MVHB TAES VHB TM TAES WITH ALL-ACRYLIC CONSTRUCTION 3M VHB tapes all-acrylic construction provides strengh and durability in highly demanding applications. It is strong enough to replace spot welds, screws, rivets, and liquid adhesives. It is durable enough for long term performance indoors and outdoors, and it is productive through application ease & versatility. Its appearance has aesthetic improvement that can be seen and felt. CFS can die cut to precisely fit any size, shape or profile you require. CFS CUSTOM DIE CUT Hat Channel Multi anel Aluminum 3M VHB TM Tape Exterior anel Aluminum Batten (splicing strip) 3M VHB TM Tape BONDING TRUCK RELACEMENT OF RIVETS ON SIDE ANELS TO STEEL FRAME OUTDOOR SIGNS Steel Framework 3M VHB TM Tape Glass anels 3M VHB TM Tape Mirrored Ceiling anel MIRROR CEILING ANELS Muntin Bar WOOD ON GLASS WINDOWS OR DOORS 50 Custom Fabricating & Supplies hone: Fax:

51 ROTECTION RODUCTS ROTECTION TAES rotect surfaces during manufacturing or shipping with simple, strong, and repositionable tape film. rotection tapes are resistant to UV, cold, heat, sunlight and humidity. rotection tapes also offer smooth, quiet removal, less bubbling and deliver high performance protection at every step of your process. rotection Tapes will help ensure your products will arrive the way they are intended to. CFS can die cut any of the protection tapes to precisely fit any size, shape or profile that you require. Contact us to find out what Surface rotection Tape will best fit your needs. OLYETHYLENE CA LUGS 200 F Our olyethylene Cap lugs can be used as a cap or as a plug. The plugs are also great for plugging threads and tube ends, to prevent contamination. Made from low density polyethylene. Recommended for Anodizing, ainting & lating. A B C D E F BOX QUANTITY TC ,000 TC ,000 TC ,000 TC ,000 TC ,500 TC ,000 TC ,000 TC ,000 TC ,000 TC ,000 TC ,000 TC ,000 Order Online Same Day Shipping info@customfabricate.com

52 ROTECTION RODUCTS HIGH TEM GREEN CA LUGS 400 F Our High Temp Cap lugs can be used as a cap or as a plug. They are great for plugging threads and tube ends to prevent contamination. Recommended for Anodizing, ainting & lating. A B C D E F BOX QUANTITY FGC ,000 FGC-2X ,000 FGC ,000 FGC-3X ,000 FGC ,000 FGC ,000 FGC-5X ,000 FGC ,000 FGC-6X ,000 FGC ,000 FGC-8X ,000 FGC ,000 FGC ,000 FGC ,000 FGC ,500 FGC-14X ,500 FGC-15X ,500 FGC ,500 FGC ,000 FGC ,000 FGC ,000 FGC-20S ,000 FGC-22S ,000 FGC-25A ,000 FGC ,000 FGC ,000 FGC-96A FGC FGC HIGH TEM SELF THREADING LUGS 400 F Our High Temp Self Threading lugs are designed for Superior sealing and holding power. These plugs will seal lead threads extremely well, avoiding gauging issues. The plugs have a high temperature resistance and won t break off during removal. They can be used on helicoal sizes. The Self Threading lugs can also be left in for ost Cure Applications to prevent Flash Rust as well. Great for Electroless Nickel lating. COLOR A B C QTY/BAG NST-2 Red NST-3 Blue NST-4 Yellow NST-5 Green NST-6 Red NST-7 Blue NST-8 Yellow NST-10 Green Custom Fabricating & Supplies hone: Fax:

53 CUSTOM DIE CUTTING & MOLDING CONTENTS CUSTOM DIE CUTTING CUSTOM MOLDING D RINTING FLASH CUTTING ELASTOMER SELECTION GUIDE... 60

54 CUSTOM DIE CUTTING CUSTOM FABRICATING & SULIES (CFS) HAS MULTILE CAABILITIES TO MANUFACTURE YOUR DIE CUTS. The die cutting method is determined by volume and lead time. Our staff has over 30 years of die cutting experience. Our parts are used in the electronics, automotive, medical, finishing, military and aerospace industries. CFS is a company you can always depend on. We also offer low cost tooling and have the capacity to handle any size order from 100 to 10,000,000 pieces. We also use Steel Rule and Rotary die cutting. With Steel Rule die cutting, the one time setup charge is lower and better suited for smaller quantities. CFS will also split back the liner for easy removal. Lead times for this process are usually less than one week. For larger quantities, CFS recommends Rotary die cutting. The one time setup charge is higher than Steel Rule but the savings is in the per piece prices. CFS can easily produce more parts in less time with Rotary die cutting than by any other method. We can produce these parts on rolls, individual pieces or in sheets. Our staff is always available to help you with your next project. lease fax us a print or send us a part and CFS will quote your project within 24 hours. We provide great technical service and broad product knowledge to help you find the right material for your application. In addition to great service and quality parts, CFS still offers the best price. lease call us today to work on your next project. 54 Custom Fabricating & Supplies hone: Fax:

55 ALICATIONS Surface rotection Seals Mounting & Holding Gaskets Spacers Shielding Masking Insulators Isolators CAABILITIES Steel Rule Kiss Cutting Sheeting Rotary (long run) Butt Cuts lot (short run) Die Less Multi Level Up To 5 x10 x5 Thick All trademarks and registered trademarks are held bytheir respective owners. MATERIALS All Types of Rubber Sheeting Materials All Types of Foam or Sponge Materials All Types of lastic Materials All Types of Gasket Materials All Tapes/ressure Sensitive Adhesives All Types of Double Sided Foam Tape All Types of Transfer Tape Fishpaper Chipboard Magnet Nomex CUSTOM DIE CUTTING & MOLDING LOTTING & LOTTING MATERIAL CFS can expedite samples of custom die cuts within 24 hours and have the ability to produce and ship small runs the very same day. For our customers with their own plotting capabilities we offer all of our tape products on a liner. Material can be purchased in widths ranging from 6 to 36. Order Online Same Day Shipping info@customfabricate.com 55

56 CUSTOM MOLDING Here at CFS we understand that developing a custom molded part can sometimes be an intimidating process for some customers. We strive to make this process as simple and risk free as possible. Our number one goal is to make sure You, the customer, succeed in every project that we re involved with. After all, our success starts with our customer s success. We also realize that in order to share in the success of each project we must also share the associated risks. To show our commitment to our customers we offer a true one time set up charge for all new custom molded parts. This includes the development of prototypes as well as production parts for one flat fee. Although many of our competitors are happy to charge as they go, this often times leads to exceeding costs, missed lead times, and ultimately, mistrust. How can we offer this? CFS has built both a sales and engineering team that has over 40 years of custom molding experience, which allows us to be 100% confident in our designs and quality. We are so confident in our staff and designs that if your prototyped part doesn t perform as promised, we will modify it at our cost until it does. lease challenge us today with your next project. You can send us a part, a drawing, or simply call to have one of our highly trained representatives come to you. SOME OF THE INDUSTRIES WE CATER TO INCLUDE: Aerospace Automotive Electronic Markets Finishing Medical Military 56 Custom Fabricating & Supplies hone: Fax:

57 ALICATIONS Surface rotection Seals Mounting & Holding Gaskets Spacers Shielding Masking Insulators CAABILITIES Injection Molding Compression Molding Transfer Molding Extruding Insert Molding 3D rinting CUSTOM DIE CUTTING & MOLDING MATERIALS Silicone Rubber EDM Viton Neoprene Natural Rubber Vinyl Hypalon Nylon olyethylene Delrin Styrene Buna olypropylene Sponge SBR Conductive Santoprene All trademarks and registered trademarks are held by their respective owners. Order Online Same Day Shipping 57

58 3D RINTING HERE AT CFS WE ARE CONTINUOUSLY TRYING TO FIND NEW WAYS TO REDUCE LEAD TIMES ON CUSTOM MOLDING ROJECTS FOR OUR CUSTOMERS. One simple and exciting solution is 3D printing! With this technology CFS offers rapid prototypes of your custom parts in 3-5 days vs. 3-5 weeks. Not only will this option greatly reduce the lead time for your custom project, it will also give you peace of mind. You will know that the chosen concept has been tested and works before you ever place an order! MATERIALS Soft lastics Rigid lastics Digital ABS Rubber Like Digital olypropylene Transparent 58 Custom Fabricating & Supplies hone: Fax:

59 FLASH CUTTING THE WAIT IS OVER! In the past when it came to custom solutions there were only two, Custom Die Cuts & Custom Molding. Although these are both fantastic options they do not always fit the project perfectly. Custom Molding can have substantial up front costs and take weeks to develop while Custom Die Cuts are limited to a single profile and height of material. Our customers have asked for another solution and we delivered! CFS is proud to be the first to introduce Flash Cutting Technology to this industry and more specificly to our valued customers! The wait is over! What is Flash Cutting? Flash cutting is the process of fabricating a part that has all of the characteristics, multi levels and profiles of a custom molded part combined with the lead time and low up front cost of a custom die cut, while maintaining no hard tooling commitment. CUSTOM DIE CUTTING & MOLDING ADDITIONAL BENEFITS Low & High Volume Runs Quick Revisions arts Up To 5 x10 x5 Thick MATERIALS Rubber Gasket Foam Tape lastic Chipboard Magnet Wood Order Online Same Day Shipping info@customfabricate.com 59

60 ELASTOMER ELASTOMER SELECTION GUIDE AND HYSICAL ROERTIES E = EXCELLENT G = GOOD F = FAIR = OOR Butyl (Isobutylene Isoprene) Epdm (Ethylene ropylene) Natural Rubber (olyisoprene) Neoprene (olychloroprene) Nbr, Nitrile, Buna-N) (Butadiene Acrylonitrile) Silicone (olysiloxane) Sbr (Styrene Butadiene) Viton (Flourinated Hydrocarbon) to AA +250 BA AA -60 to BA +350 CA -60 to to AA -40 to BC +250 BE BF -60 to BG +250 BK -90 to FC FE GE -50 to AA +225 BA TB F-G G E G-E G-E E G G-E G F-G F-G G -G F-G E E E G G-E G-E G-E G-E F-G F G-E E G-E E G-E G-E G E F-G F-G E F-G F-G G-E F-G G G-E G G E F F- G-E G-E F-G G-E F- E G E E G-E E G-E E E G E F-G G E G-E G F-G G F-G G E F- G F-G E G G F-G F-G The information in this table is intended only as a guide. CFS recommends that any material you select be tested in your application prior to actual production. All trademarks and registered trademarks are held by their respective owners. High Intermittent Temperature F Low/Hi Temp Usage F Hardness Range (Shore A) Astm D2000/Sae J200 Type, Class Abrasion Resistance Acid Resistance Alcohols Aliphatic Hydrocarbons Alkali Resistance Aromatic Hydrocarbons Compression Set Elongation (Maximum %) Gas Impermeability Halogenated Hydrocarbons Lubricating Oils etroleum Based Ozone Resistance olar Solvents (Ketones) Resilience-Rebound Steam Resistance Tear Resistance F-G G G-E F G G F Tensile Strength G-E E G-E -E E E Weather Resistance 60 Custom Fabricating & Supplies hone: Fax:

61 HOOKS & MISCELLANEOUS CONTENTS HOOKS SWIVEL HOOKS CONVERSION CHART TERMS & CONDITIONS

62 HOOKS & MISC. HOOKS Degree angle High load capacity Other angles available upon request Solid metal to metal contact Consistent grounding Low minimum - 1 bag All sizes are available in the following styles: S = S HOOKS C = C HOOKS V = V HOOKS CV = CV HOOKS WIRE SIZE LENGTH QTY/BAG dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long dia Long Custom Fabricating & Supplies hone: Fax:

63 WIRE DIAMETER (INCHES) V-HOOK LOAD CHART 220 LBS. 164 LBS LBS LBS. 9.7 LBS. 4 LBS. WIRE DIAMETER (INCHES) C, S, CV-HOOK LOAD CHART 145 LBS. 58 LBS. 28 LBS. 16 LBS. 6.8 LBS. 2.6 LBS. HOOKS & MISC. WEIGHT (OUNDS) WEIGHT (OUNDS) SWIVEL HOOKS U and V Styles Double ball bearing construction Rotates pound capacity SWIVEL U SWIVEL V CFS has the capability to manufacture custom hooks. Simply fax a sketch or send us a part and CFS will send you a quote and sample. We offer quick turnaround time and low minimum. Call for information on Snap Hooks. Visit our website for more information on MASKING SULIES. Order Online Same Day Shipping info@customfabricate.com 63

64 CONVERSION CHART INCHES DECIMAL MILLIMETERS INCHES DECIMAL MILLIMETERS 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Custom Fabricating & Supplies hone: Fax:

65 TERMS & CONDITIONS OF SALE FREIGHT - F.O.B. Our dock, Franklin, WI. RICES - rices are per roll (unless otherwise indicated) are subject to change without notice, and will be billed at the prevailing price at time of shipment. ricing discrepancies will be confirmed prior to shipment. rices are net and do not include any applicable federal, state, or local taxes, which will be either billed to or assumed by purchaser. All quantity prices apply to single shipments only. CFS reserves the right to adjust orders to the nearest full case. Minimum order billing: $ All prices are net. ASSORTING RIVILEGES - All items are assortable to determine case quantity for pricing, except as noted elsewhere in this schedule. Quantity ordered under this condition must be single shipment, to one destination, to qualify for quantity pricing. AYMENT TERMS - Net 30 days subject to credit approval. ast due accounts subject to service charge of 1 1 /2% per month (18% per annum) on unpaid balances until paid. DELIVERIES - Shipments will be made as nearly as possible in accordance with dates specified by seller s acceptance of order, subject to any or all causes beyond seller s control. RETURNS & CLAIMS - All merchandise delivered is non-returnable, except as authorized in writing by CFS in Wisconsin. Unauthorized returns will be refused. All returns will be subject to a re-stocking fee. All special order items or sizes slit to order are not returnable. Returned Goods Authorization Number (RGA) must be clearly marked on all returned items. RGA s expire 30 days after date of issuance. Once RGA expires, CFS will not accept returns. NON-STANDARD & SECIAL ITEMS - CFS reserves the right to increase or decrease order by 10% over or under the specified quantity. AIR SHIMENTS - Shipments requested via Air Freight must ship FREIGHT COLLECT. This includes shipments via US/Red Label (next day air) and US/Blue Label (second day air). CANCELLATION - Contact CFS to obtain a cancellation number. Cancellations will not be accepted without a cancellation fee if a product has been converted or slit to order. Cancellations will not be accepted on non-standard items and blanket purchase orders. WARRANTY - CFS warrants its products to be free from defects in material and workmanship. Should any failure to conform to this warranty appear after the initial date of shipment, CFS shall issue a credit in favor of purchaser in an amount not to exceed the purchase price of the products. roducts are sold with the understanding that the buyer has independently determined the suitability of the product for his purposes and he is reminded that a few materials are sensitive to adhesive tapes and discretion should be used in their application. Bulletins, specifications, product and testing reports, and other descriptive and advertising material and information are based on research testing and are believed to be reliable, but constitute no part of this warranty, which is exclusive and strictly limited to the foregoing. This warranty is exclusive and is in lieu on any implied warranty of merchantability, fitness for a particular purpose, or other warranty of quality, whether express or implied, except the warranty of title and against patent infringement. No waiver, alteration, additions, or modifications of the foregoing conditions shall be valid unless made in writing and manually signed by an officer of CFS. No agent or representative is authorized to give any guarantee or make any statement contrary to or inconsistent with this warranty. LOST AND DAMAGED SHIMENTS LOST GOODS - DO NOT SIGN Delivery Receipt until you can count all pieces. Sign only for what you have received. If signed short, contact CFS immediately and CFS will proceed to file a loss claim. If replacement is needed, a new urchase Order Number will be required. DAMAGED GOODS - UON DELIVERY, inspect all goods CAREFULLY for damage. If goods are damaged, refuse on delivery, and contact CFS immediately for further instructions. If replacement is needed, a new urchase Order Number will be required. CONCEALED LOSS AND DAMAGE - Report concealed loss or damage to carrier within 48 hours and request inspection by the carrier. This is absolutely necessary; otherwise, the carrier will not be liable for payment or settlement of concealed damage freight claims. CFS will advise you on the best procedure to follow in filing a freight claim. However, CFS cannot assume any responsibility with respect to concealed lost & damaged freight claims. LIMITATION OF LIABILITY - In no event shall CFS be liable for any incidental or consequential damages, including but not limited to loss of profit, loss of use or production, or loss of capital. The remedies of purchaser set forth herein are exclusive and the total liability of CFS with respect to any contract or anything done in connection therewith, such as the performance or breach hereof, or from the manufacture, sale, delivery, resale, installation, or use of any products, whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not exceed the purchase price of the products upon which liability is based. Order Online Same Day Shipping info@customfabricate.com 65

66 WISCONSIN CALIFORNIA GEORGIA OHIO OHIO TEXAS TEXAS 5500 West Oakwood ark Drive 9925 ainter Avenue Gramercy lace lace Woodmere Woodmere Drive Drive Vantage Vantage arkway arkway West West Franklin, WI Suite Suite Q Q Canton, Canton, GA GA Cleveland, Cleveland, OH OH Suite Suite Whittier, CA CA : : : : Houston, Houston, TX TX F: F: : : F: F: F: F: : : F: F: F: F: