ELECTRONIC CIGARETTE KIT. user manual

Transcription

1 ELECTRONIC CIGARETTE KIT user manual 1

2 Congratulations on purchasing your Totally Wicked Corsa Electronic Cigarette. A The Totally Wicked Corsa is a stylish, highly functional, and high power e-cigarette design incorporating an intelligent temperature control system, allowing you to finely tune your device to suit your vaping style, additionally, upgradeable firmware means that you will always be up to date. The user is provided with five modes of operation; variable power (W); variable temperature with nickel coils (Ni); variable temperature with titanium coils (Ti); variable temperature with stainless steel coils (SS316); and temperature coefficient of resistance (TCR). Each adjustable mode allows for incremental settings in terms of watts, temperature and temperature coefficient of resistance respectively. Totally Wicked Corsa A 510 Thread with spring connector B Micro USB Charging Port C Power Button D OLED Screen E Adjustment Button B D C The Corsa combines all of its functionality and dual Li-batteries in a sleek and ergonomic, yet simple to use package, suitable for all intermediate to advanced electronic cigarette users. E 2 3

3 Fitting Batteries: The Corsa utilises dual Libatteries. To fit the battery simply slide the locking switch on the bottom of the device and insert two batteries, ensuring the correct polarity. To close the hatch push it firmly into position and a positive click will indicate that it is securely closed. Power On and Off: The Corsa uses a 5-click on/off function. To switch the device on quickly press the power button 5 times. The OLED screen will illuminate, signifying that the device is powered on. Once the Corsa is powered on the user can press the button 5 times to switch the device off. Vaping: Simply press the power button as you inhale. Using your Corsa Shift between VW/VT-Ni/VT-Ti/VT- SS316/TCR Modes: When powered on, press the power button 3 times consecutively, the first row will flash indicating that the right adjustment button may be used to cycle through the VW/VT-Ni/VT-Ni /VT-SS316/ TCR modes. VW Mode: When in VW mode, use the left or right adjustment buttons to decrease or increase the level of wattage respectively. The available wattage range is 1W 150W. 4 5 LEFT RIGHT

4 VT Mode (Ni/Ti/SS316): When in VT mode, use the left or right adjustment buttons to decrease or increase the temperature respectively. The available temperature range is C or F and can be adjusted in increments of 5 C and 10 F. To adjust the wattage level whilst in VT mode, press the power button 3 times quickly to activate the menu, press the left adjustment button once and the wattage (PWR) value will flash, use the right adjustment button to adjust the wattage level. To lock/unlock the atomizer resistance, press the power button 3 times quickly to activate the menu, press the left adjustment button twice and the atomizer value will flash, use the right adjustment button to lock/unlock the atomizer resistance. Note: Only lock the atomizer when the coil is at room temperature. Note: If a coil with a resistance exceeding 1.5ohms is applied in VT mode, the device will automatically switch to VW mode. Also, if a standard kanthal coil is used under VT mode, the device will automatically switch to VW mode. RIGHT RIGHT 6 7

5 TCR Value Range Configuring TCR Mode: When in TCR mode and the title is flashing indicating that the menu is active, press the left adjustment button once and the sub-menu (M1, M2, M3) will flash. Whilst the sub-menu is flashing press the right button to shift between M1, M2 and M3, then press the power button to confirm. (Also see: Configuring TCR Mode) Configuring TCR Mode: To set the temperature coefficient of resistance to match a particular coil, when the device is powered off simultaneously hold the power button and the right adjustment button to enter the TCR configuration menu. Use the right or left adjustment buttons to select which to configure from M1, M2 and M3 this feature allows the TCR values for 3 materials to be stored to the device. Press the power button to select the TCR value and then use the adjustment buttons to increase or decrease the value to your preference, long press the power button or leave the device for 10 seconds to confirm the selection. 8 9 Material TCR Value Range Nickel NiFe Titanium SS (303, 304, 316, 317) Note: The TCR value displayed is the multiple of the actual TCR value and is for Corsa usage only.

6 Using your Corsa Current Display: The real-time current (AMP) is displayed on the screen on the fourth row whilst the power button is pressed. Battery Charge: The individual battery charge for each of the dual batteries is displayed on the fifth row of the display. Display Modes: When powered off, hold both adjustment buttons to turn the display through 180. Two display states are available. Stealth Mode: When powered on, simultaneously hold the power button and the left adjustment button to activate stealth mode. Repeat the process to deactivate stealth mode. Key Lock Mode: When powered on, simultaneously hold the two adjustment buttons for 3 seconds to activate key lock mode. Repeat the process to deactivate the key lock mode. Charging the Batteries: Simply charge the Corsa via the USB cable connected to a powered USB port or suitable wall adapter. The indicator on the display will indicate the battery status. Charge Error: If no charging current is detected when the device is connected to the charging lead, Charge Error will be displayed

7 Using your Corsa Check USB Adapter: If the voltage of the USB adapter is 5.8V or higher, Check USB Adapter will be displayed on the screen when either the charging lead is connected or the power button is pressed. Replacing the Battery: To replace the batteries, simply slide the locking switch on the bottom of the device and remove both batteries. Insert two batteries, ensuring the correct polarity. To close the hatch push it firmly into position and a positive click will indicate that it is securely closed. Imbalanced Batteries: If the voltage difference between the two cells reaches 0.3V or higher, Imbalanced Batteries will be displayed when the charging lead is connected. New Atomizer Installation: When a new atomizer is connected or the existing atomizer is disconnected and reconnected, a message prompt will be displayed New Coil Right, Same Coil Left. Press the right adjustment button to confirm that a new atomizer has been connected, or the left adjustment button to confirm that the existing atomizer has been reconnected. Selection of a new coil should only be made when the atomizer and coil are at room temperature

8 Using your Corsa Short Circuit Protection: If a short circuit occurs when the power button is pressed, atomizer short will be displayed on the screen. Replace the atomizer to continue. Low Voltage Protection: When the battery voltage is below 3.1V, Battery Low will be displayed on the screen. If following this message the button is continually pressed, the message Battery Low Lock will be displayed and the device will not fire. To unlock and activate the device the batteries must be recharged. Weak Battery Alert: Under VT/VW mode, when battery voltage is below 2.9V, the device will display Weak Battery. The output power will automatically be reduced accordingly. 10 Second Protection: If the power button is pressed for longer than 10 seconds the output will automatically cease and the message Over 10s Protection will be displayed. Upgrading Firmware: To upgrade the firmware installed on the device simply load the relevant product page on the Totally Wicked website, click on the link under Firmware Upgrade and follow the instructions provided

9 Specifications Wattage Range in VW Mode and VT Mode: 1W 150W Temperature Range in VT Mode: C / F Temperature Coefficient of Resistance Range in TCR Mode: Resistance Range: ohm in VT Mode, ohm in VW Mode Tank Connector: 510 Connector Battery: Dual Firmware Type: Upgradable Warranty The Corsa components have a 28-day parts warranty. The USB cable supplied has a 12-month warranty. If any parts are found to be faulty within this time please contact our customer service team, whose details are on the back page of this booklet and we will arrange for a replacement. We may require the goods to be returned for further investigation

10 Precautions DO s Store the Corsa and its accessories away from children when not in use. Ensure the Corsa is powered off when not in use. Avoid accidentally pressing the Corsa power button when not in use. Remove the battery when you do not intend to use the Corsa for several days. Please only use the charging cable provided. Please dispose of dead batteries in accordance with your country s appropriate legislation. Use only a maximum of 1.5ohm when in VT mode. The mode will automatically be switched to VW mode when the coil is larger than 1.5ohm or a normal coil is used. DON Ts Do not charge the batteries in a damp environment. Do not use the device when temperatures are outside the range C. Do not charge the battery when temperatures are outside the range 0-45 C. Do not carry batteries in a pocket bag with other metallic objects. Do not attempt to repair a faulty Corsa as these are sealed units with no serviceable parts. Attempted repairs will void the warranty. Do not use temperature control coils under VW mode, damage will be caused

11 20 Manufactured in China by Joyetech under the authority of Pillbox38 UK Ltd, Stancliffe Street, Blackburn, Lancashire, BB2 2QR. Tel Tel 1(888) Tel