K518. Android Car Multimedia. User s Manual

Transcription

1 Android Car Multimedia User s Manual

2 Contents ANOUNCEMENTS...3 OPERATION... 4 SETUP Wallpaper Startup picture Common setup Display Setup Sound options Video options Bluetooth Navigation Steering wheel control ANDROID SETUP RADIO FUNCTION GPS OPERATION...14 DISC PLAYBACK(OPTIONAL)...15 U-DISK/SD CARD PLAYBACK...17 IPOD PLAYBACK(OPTIONAL)...19 BT HF OPERATION BT MUSIC (A2DP) AV IN (AUXILIARY INPUT)...21 DISPLAY SCREEN INTRODUCTION...21 GPS ANTENNA INSTALLATION TROUBLE SHOOTING / 25

3 ANNOUNCEMENTS For your safety, please try not to watch the video and operate the machine while driving; please turn the volume to the level less than the outside sound. Before you start, please read this manual and other manuals of this system to understand the safety instructions and warning signs on this manual and the machine. After reading, please put it in readily reachable place so as to refer to the manual anytime. Please note that traffic safety firstly. If you are in trouble with your system, please park your car in a safe place. Do not allow children to operate the machine, so as to avoid personal injury or machine damage. Please follow the traffic rules when using the satellite navigation function. Please do not use electronic equipment or prohibit the use of fire, such as: gas stations, wineries, electromagnetic interference areas, etc., or may cause danger. Do not carry out maintenance, maintenance and installation of this machine. Do not install or service the unit in the event of a power supply. Installation and maintenance of this machine by a person who has not been trained or inexperienced by an electronic device or vehicle accessory is dangerous. Do not store or install this machine in direct sunlight, nor place it in other hazardous substances, especially the LCD screen. If installed, the LCD screen is just in the air conditioner near the ventilation duct, please ensure that the cool air or hot air do not blow directly to the machine, otherwise it may damage the machine, and even the car or personal injury. Do not use some sharp objects to draw the screen, do not take hard objects to press the display, otherwise it will cause the display or touch screen damage. In order to ensure the normal operation of the machine, to prevent the occurrence of fire or electric shock, please do not expose the machine in the humid air, not the liquid spilled on the machine. If the machine supports discs (optional), only 12 cm discs can be played, and only one disc can be played at a time. Please do not insert 8 cm discs or other items into the machine. 3 / 25

4 OPERATION System Reset 1) When using the unit for the first time, press and hold the "RESET" button for more than 3 seconds to restore the machine to the factory settings. 2) When the abnormal operation caused by improper operation and other abnormal phenomenon, please press the reset "RESET" button for more than 3 seconds, the machine can return to normal. Note: Since the reset button on the panel is small, use a pen tip or similar pointed object. Turn on / off the unit 1) When the ACC switch is on, press the "POWER" button on the main panel to turn on the power; 2) Insert the disc into the disc, the machine will automatically open, open to enter the disc mode; 3) When starting the machine, long press the main panel "POWER" button switch, or flame out the car key will turn off the power of the machine. Volume adjustment Rotate the volume knob on the panel (the volume control key on some model panels is the "VOL + / VOL-" button) to adjust the volume of the unit. Mute switch Press the "MUTE" button on the panel to mute the system, press again or adjust the volume to restore the sound. Backlight switch Short press the back light switch "LIGHT" button on the panel or remote control to turn the backlight of the unit's display on or off. Reversing camera After the vehicle is reverse, regardless of the machine is turned on or off, the display will immediately switch to the reverse camera screen. Play source selection 1) Press the "MODE" button on the main panel or the remote control to toggle between radio, disc playback, USB playback, SD playback, mobile TV (optional), IPOD playback (optional), or AVIN 2) In the home page interface, touch the different function icon to enter the corresponding interface, the detailed operation of each function see the next chapter. Touch the sliding home page to switch between multiple home pages. 4 / 25

5 DISC ESP electronic shock function (disc is optional) The machine has an electronic shock function, so the car even if the road is not very good road and vibration, the machine's audio and video playback will not be affected much, of course, the length of the shock time will play different discs vary. The following shock time is for reference only: DVD disc - about 5 seconds; CD / VCD disc - about 10 seconds; MP3 - about 150 seconds. Mode and play position memory Turn off the power of the unit, and then re-boot, the system will return to the original shutdown mode. If it is a radio, will continue to listen to the memory before the radio, if it is music or video, will continue to resume from the last resumed playback. 5 / 25

6 SETUP In the touch screen, click on the main interface settings icon to enter the system settings interface, click on the corresponding option to enter the corresponding settings options, you can drag the bar up and down to find the desired settings. Note: Set the switch slider in the description. [ ] Switch on status [ ] Switch off status 1. BACKGROUND WALLPAPER In the main interface of any blank, long press 2 seconds, there will be wallpaper selection dialog box, as shown below: Users can choose static built-in wallpaper, dynamic wallpaper. You can also import from the ES file browser user-defined wallpaper, custom wallpaper format can support jpg, png, bmp and other image formats. Note: wallpaper only in the main interface display, into other applications, wallpaper is no longer as a background. In order to make the wallpaper have a better display, please try not to use a lower resolution than the screen picture. 6 / 25

7 2. STARTUP PICTURE In the general setting options, click "boot picture", in the pop-up password box, enter the password (5678), you can enter the boot screen settings option. Press and hold up and down the flip page, select the favorite boot picture, select, click "OK" will select the screen is set to boot screen. Users can also click as a boot picture. 3. COMMON SETUP, from the external sd card or U disk into a custom picture 3-1. Key tone Select the Beep sound to turn the button on or off 3-2. Suspended ball Choose to turn the ball on or off. There are six commonly used touch buttons on the floating ball that can be displayed on the top. In any interface, to provide users with convenient operation Reversing volume suppression Select the size of the media volume adjustment when reversing. You can have "no, weak, medium, strong", four options. When "no" is selected, it indicates that the volume of the media at the time of reversing is not reduced, and when "strong" is selected, it means that the volume of the media at the time of reversing is greatly reduced Restore factory settings Click to restore the factory settings option, pop-up confirmation interface, click OK, the machine restart, restore to the factory state, and your settings will be cleared System restore Click on the system restore, will delete the user to install all the applications, the system will return to the factory state. Note:Files within the internal sdcard directory will not be restored.it is recommended that customers place important data in this directory,such as map data. 7 / 25

8 4. DISPLAY SETUP 4-1. Daytime Backlight Set Drag the right slider to select the daylight screen brightness value Nighttime Backlight Set Drag the right slider to select the nighttime screen brightness value Note: Reasonable adjustment of day and night screen brightness helps you to use this equipment safely and comfortably. Day and night mode switch user can click on the main interface " " manual switch, you can also switch through the instrument lights to open the signal Headlamp automatic detection Click the right switch button to turn on or off the meter auto detection mode. When the automatic detection of the instrument lights is turned on, the system will switch the day and night mode according to the current state of the instrument lights. The instrument lights will select the brightness mode at night and the daylight brightness mode will be selected. 8 / 25

9 5. SOUND OPTIONS 5-1. Sound setting You can enter the audio setting screen by clicking on the "Sound Options" of the setting interface, clicking the sound icon " "EQ" button on the panel. " in the mode, or by pressing the The machine provides 10 DSP sound effects, to bring you an excellent hearing to enjoy. You can select the preset six sound modes. You can also customize your favorite settings, your custom settings will be saved in the "user" mode Balance setting Click the balance setting icon " " in the sound interface to enter the balance setting interface. click around four arrows to adjust the volume of the four speakers in the car. "Red dot" in the center that the four speakers of the volume ratio of the same. click on the lower right corner of the recovery icon " " to restore the current balance set to the default value Loudness setting Swipe the slider to change the current loudness value, and raise the loudness to increase the gain of the low-frequency part of the sound. Please reasonable to enhance the loudness value, excessive increase will lead to audio signal distortion. 6. VIDEO OPTIONS 6-1. Driving video Click the switch button on the right to turn on or off the video when the video is disabled. If the driving video prohibition function is turned on, the vehicle will not be able to watch the video and pictures while traveling. Note: This setting is available for your driving safety advice. 9 / 25

10 6-2. Reversing video image Turn on or off the reverse video image image mode, please choose according to the actual installation of the camera on or off Reversing trajectory This feature only supports some vehicles. Select "open", in the reverse screen, turn the steering wheel, the screen will be rotated with the steering wheel to show the track Reverse warning line Some of the original car configuration of the camera is not a distance from the warning line, open this feature, you can reverse the screen display signs of the warning line Air conditioning display This feature only supports some vehicles. When the air conditioner is selected, the current state diagram of the air conditioner is displayed on the screen. 7. BLUETOOTH 7-1. Device name Displays the Bluetooth name of the current unit Pin code Displays the Bluetooth pairing password for the current unit click on the right arrow to enter the change password, enter any 4 digits to modify your unit's connection password Auto Connect Select whether to automatically search and connect the last connected phone after starting the unit Auto Answer When Bluetooth has coming call, choose whether to answer the call automatically. 10 / 25

11 8. NAVIGATION 8-1. Autostart Navigation Whether to automatically start navigation map software after switch on File Path The user can select an already installed navigation application to match the external navigation button. The system will automatically list all the apps that have been installed. You only need to click to select the correct application you need. 9. STEERING WHEEL CONTROL Please follow the steps below to set your steering wheel button function. 1) Click to clear all " " 2) Press and hold the 1 button on the steering wheel that needs to be set. 3) Click the button on the corresponding function on the touch screen. 4) When the button turns green, the button has been set successfully. 5) Repeat 2-4 action to complete all the keys to learn. 11 / 25

12 ANDROID SETUP 1.Enter the Andrews setup interface In the main interface to find the Andrews universal settings icon main interface to install Andrews. As shown below:, click into the 2.Wifi connection In the settings interface to find the item is turned on, click to enter:, confirm the right of the wifi switch As shown above, in the wifi hot list to select the hotspot you want to connect, you may need to enter the connection password, click on the connection to complete the wifi connection. 3.Language & input In the settings interface to find, click to enter: In this interface you can complete the interface language replacement, input method and input keyboard replacement. 4.Date set In the settings interface to find, click to enter: 12 / 25

13 The system acquiescence from the internet and GPS information automatically get time information to calibrate the host time. If the customer does not need this feature, you can automatically determine the date and time function after the closure, and then in this interface, to set their own date and time. 5.Program installation and removal The unit supports user-defined installation of various Android application software, but does not guarantee that all applications are compatible. Users can use the external U disk, sd card will be third-party Andrews application software installed into the unit. Firstly copy Andriod APK file into the U disk or sd card and other storage devices. The storage device access machine, start the built-in ES file browser application, in the ES file browser to find the corresponding storage device, enter the corresponding APK file, click into the installation process. If you want to delete the installed application, click the icon on the main interface and select the app you want to delete. 13 / 25

14 RADIO FUNCTION Enter the radio mode Short press the "BAND" key on the panel or touch the "Radio" icon in the main screen to enter the radio mode Band selection Click " Search for radio ", band selection: FM1, FM2, FM3, Short press the "Search" icon in the radio interface to search for a radio in the forward or reverse direction. If you search for a radio station, it will automatically stop and start listening. Automatically search for radio Click on the " " icon in the radio screen, the system will automatically search from the lowest frequency to the highest frequency of strong signal radio. During the radio search, press the " " icon again to stop the search. Preset radio Each station can store 6 radio frequencies. The machine can store a total of 24 (18 FM, 6 AM radio) stations. Manually store the radio Long press the preset station key (1-6) for about 2 seconds, the current radio frequency saved in the corresponding preset. Stereo / mono conversion (FM only) In the center of the city, the radio signal is strong, the stereo mode can receive better results, but when the radio signal is unstable, you can choose to switch to the mono mode to improve the radio effect. GPS NAVIGATION OPERATION GPS satellite navigation system come out to bring a great convenience to the traffic, 14 / 25

15 the user can GPS positioning and supporting the electronic map of the guidelines, fast, efficient and quick to reach the destination. To achieve accurate navigation, GPS positioning and navigation map both are indispensable, for the GPS requirements are high positioning accuracy, speed of operation; for navigation map requirements is large amount of information, data accuracy, path planning ability. 1. Navigation map data Navigation map data can be copied to the internal memory card sdcard, copy before the need to determine whether the current internal storage is sufficient storage space. If necessary, please delete unnecessary data. The delete and copy can be implemented using the internal preset ES file browser application. Some navigation applications can also support the data into the external sdcard or U disk. Note: Some navigation programs will specify the path of the map data, does not support the map data into an external sdcard or U disk. 2. Navigation application APK installation Before using the navigation application, you should install the navigation application apk. Please first install the map application apk. 3. Start navigation When the navigation apk is installed correctly, a corresponding icon is generated on the main desktop. Click on him to start the corresponding navigation application. The user can also enter the "Car Setup -> Navigation Settings -> Navigation Program Selection" to associate the navigation key with this navigation application. After the correct association, the user can directly through the "navigation button" to achieve the boot navigation. 4. Navigation application Please refer to the operating instructions for the specific navigation application. DISC PLAYBACK(OPTIOANL) Enter the disc mode 15 / 25

16 When the power is turned on, if the dish has a disc, press the "DVD" button on the panel or click on the main interface "DVD" icon to enter the disc reading mode. Note: Some discs may not be available depending on the disc configuration and characteristics, or because the disc recording conditions and editing use the software. Enter / Reject When the power is turned on, the disc is printed with the side up and the light is inserted into the disc. When the disc is inserted, it will automatically suck and start reading. This machine only supports 12cm size disc. Can play DVD / DVD-9, CD / VCD format disc. When there is a disc in the disc, press the disc on the main panel to exit the disc. If the disc is removed after 5 seconds has not been removed, the host will re-inhale the disc. DVD/VCD disc Menu screen DVD video disc, click " PBC screen. Digital selection " to enter the menu screen, if it is VCD disc, enter the Click " " pop up the number of selected screen, support chapter selection, title selection, time to play three ways. Repeat play Click " " to switch between different repeat modes. Different types of discs, repeat patterns are also different. VCD / SVCD: single repeat full disc repeat DVD/DVD-9:Chapter repeat title repeat full disc repeat 16 / 25

17 Subtitle language switching function DVD discs may contain subtitles in multiple languages. During the playback process, click the " Note: " key to toggle the subtitle language you need. 1) Not all DVD discs can convert subtitle language while playing; some discs are selected by subtitle language via DVD menu 2) The screen may have a slight pause before the selected subtitle language appears. 3) Some DVD discs can not be hidden 4) The number of subtitle languages is related to the type of DVD discs that are played back. Some DVD discs only have a subtitle language. 5)Deckless(without disc player) unit does not support DVD / VCD function. Channel switching Some discs themselves have multiple audio tracks, and during the playback process, click the " Note: " key to convert the audio tracks recorded on the disc in turn. Some discs are only provided with one channel. Picture ratio switching Click " " to toggle the screen ratio, 4: 3 and 16: 9 to switch between. U-DISK/SD CARD PLAYBACK The unit supports playing audio and video files of U disk/sd card audio and video 17 / 25

18 files. Note: For this Android system, it doesn t have SD card slot. Note: The unit supports FAT16 / FAT32 / EXFAT / NTFS format file system. Enter the media playback mode Insert the U disk or SD, the unit will automatically detect the device inserted. This unit will analyze all the files in U disk or SD card, according to the file extension is divided into audio and video categories. If the current U disk or SD card is ready, click on the home page interface "U disk" or "SD card" can also enter the playback screen. Audio Playback This unit not only supports mp3, but also supports ape, flac and other lossless format playback, to give users the perfect sound quality enjoyment. Lyrics display The unit supports LRC format lyrics, if the song with a lyrics file, the playback screen will give priority to display the lyrics. Click on the lyrics or spectrum area to toggle the display of lyrics and spectrum. Envelope display The machine supports mp3 envelope display, if the song with the envelope data, as shown above, will give priority to display the envelope screen. Folders and lists In the playback interface, click " " to enter the file list screen. Users can choose other directories, enter the corresponding folder, and then select the song you like to start playing. Repeat and random Click " " to switch the repeat mode, repeat the current song repeat the current folder repeat all tracks. click " " to switch the track to random mode on and off. 18 / 25

19 IPOD PLAYBACK(OPTIONAL) The unit supports IPOD, IPHONE through Apple's own USB data cable directly to play the internal music. Because the use of Apple's certification chip, so you can support the latest IPOD and IPHONE models. Note: ipod function is not included in default unit. List switch Click to enter the playlist selection screen, click into the artist selection screen, click into the track selection screen, click the key to enter the album selection screen. Note: As the Apple control protocol does not support drag playback, so in the playback screen, does not support the playback time drag. The unit must install the Apple authentication chip to support Ipod / Iphone playback function. BLUETOOTH HANDSFREE Unit Bluetooth Handsfree provides you with free and secure calls that allow you to 19 / 25

20 drive your vehicle more safely. In the main interface, click the " below. " icon to enter the Bluetooth interface, as shown Unit and mobile phone for the first time with the connection To use the Bluetooth handsfree feature, you must first connect the unit to the phone. 1) Turn on the phone's Bluetooth function and activate the Bluetooth device search function 2) search unit Bluetooth equipment, such as "BT1234". 3) When connecting, the phone will prompt you to enter the PIN code, please enter the corresponding PIN code, such as "0000". 4) After the connection is successful, the "Connected" flag will be displayed on the screen. 5) If the phone has been connected with the unit, the user can directly click on the next " " to establish a Bluetooth connection. The user can also disconnect the Bluetooth connection by clicking " ". Dial number Bluetooth handsfree connection, the user can dial the phone or touch the number keys to enter the phone number. If the phone number is incorrect, touch " " to delete it digitally. Press " numbers. After entering the phone number, click " Voice switching During the call, touch " speakers and the phone. Call records " on the touch screen to delete all entered " to dial out the phone. " on the screen, and the call will switch between the car Call records include "dialed calls", "answered calls", "missed calls", users can dial and delete operations. Phonebook synchronization The unit supports the synchronization of mobile phone books to the unit. After Bluetooth connection, click " " to start downloading the phone book. When the download is complete, the phone will match the phone book, if the match is successful, will be displayed on the screen caller's name. For quick access to contacts, the phone book supports the first letter search function. 20 / 25

21 Note: Due to the compatibility of the Bluetooth protocol, the unit does not guarantee to support all models of mobile phones, if found Bluetooth connection problems, please let us know. BLUETOOTH MUSIC(A2DP) The unit supports Bluetooth music playback, the phone can be stereo audio through the Bluetooth transmission to the car speakers, while supporting the "last song", "next song", "pause / play" and other simple control. Note: The mobile must support Bluetooth 2.0 above protocol. AVIN(AUXILIARY INPUT)OPERATION The unit supports auxiliary audio / video (A / V) input. Please follow the instructions below. 1) Connect the external audio / video system to the AV input cable of this unit 2) Click on AVIN in the homepage to switch to audio and video input mode. DISPLAY SCREEN INTRODUCTION Use the display correctly 21 / 25

22 1. Use precautions Do not place the monitor for long periods of time at direct sunlight or at high temperatures. Otherwise it may cause the LCD screen failure. If do not use the unit, please avoid direct sunlight to the monitor. Use the monitor in the following temperature range. Operation temperature range: -10 degrees to +50 degrees Storage temperature range: -20 degrees to +80 degrees In order to improve the viewing within the car, the display of the LCD screen exposed. Do not press the LCD screen, otherwise it may cause malfunction. When you click on the LCD screen, be sure to tap your finger in addition to the touch screen coordinates. Otherwise it is possible to scratch or stick the dirt. Vehicles equipped with safety devices such as air bags should be careful not to interfere with the safety of the device. 2. About the LCD screen The LCD screen of the monitor sometimes has a small black dot or a flash point (bright spot). This is a unique phenomenon of LCD screen, not a fault. When used in cold areas, the screen may be dark after power is turned on. After a while will be able to return to normal brightness. If the sun direct sunlight to the display of the LCD screen, because the light is not easy to see the reflection of the screen. 3. About maintenance When sticking dust on the cleaning screen or dirt on the monitor, turn off the power and wipe it with a soft cloth. When wiping the monitor, be careful not to scratch the nail. Do not use wet cloth. Do not use volatile oils such as volatile oils and thinners. 22 / 25

23 INSTALL GPS ANTENNA GPS antenna can be installed inside the car, such as installed on the dashboard; can also be installed in the vehicle outside, such as roof. GPS antenna must have an open "vision" towards the sky. If the vehicle's glass is equipped with an explosion-proof membrane, the insulation film may greatly impair the strength of the GPS antenna's acceptance of the satellite signal; in this case, it is recommended that the GPS antenna be installed outside the vehicle. GPS antenna installation steps Before using the adhesive tape to secure the GPS antenna, be sure to use the appropriate oil-soluble cleaning agent to clean the adhesive area. After cleaning the torn off the paper, the GPS antenna on a moderate position, forced tight. Remove the side panels, the line through the storage box, until the console console, pay attention to the line with the original car line tie tie. Connect the GPS antenna plug to the host. Notice Make sure the system is powered off when connecting the GPS antenna Do not shorten or extend the GPS antenna; changing the length of the antenna may cause short circuit or antenna failure; GPS antenna should be installed as much as possible to a horizontal plane; otherwise it may affect the navigation and positioning accuracy. Do not twist or interfere with the GPS antenna steering wheel or shift lever, otherwise it may be dangerous! 23 / 25

24 TROUBLE SHOOTING If you encounter the following problems in use, troubleshooting will help you quickly solve the problem, if the problem is still not resolved, please contact the professional or to the sales office advice, not privately open the machine, so as to avoid serious consequences! Problem Reason Solution Unable to start Touch screen does not respond DVD discs can not play DVD menu contents can not be touched DVD screen is poor No rear view image The system is not started, reversing the process appear reversing rear view image, press key is invalid GPS can not be positioned Can not be positioned and navigated after power on Blurry search can not find where to go Car keys are not inserted into the switch, not open the switch Insert the car key and open the switch The power line is plugged into the host Insert the power cord It is possible that the fuse of this Replace the fuse with the machine is burned same rated current The system is dealing with affairs (road search, etc.), wait a moment, if still can not solve, it is recommended to contact our after-sales service to help solve Correct the disc direction, the Discs put negative direction light source face down into the disc The disc is scratched or deformed Replace good discs Non-native support format discs Check the disc type and replace the supported disc May be non-genuine disc Brightness / Contrast / Saturation is too small No camera installed Camera format is wrong Product design focus on the principle of driving safety, the default reversing rear priority GPS antenna is not inserted May be in some GPS signal shielding area Navigation map blind area, some remote mountainous areas or roads have not yet been built on this map Please use genuine discs Re-adjust the brightness / contrast / saturation to the appropriate state Install the camera, insert the host's CCD plug Replace the matching camera Must be terminated after the reversing action, in order to press the original car power button to start the system boot Insert the GPS antenna Try to drive out a distance to observe whether the GPS recovery signal, if not restored, please contact the Department of after-sales service Please contact the service department to confirm the update map First confirm whether the input characters are correct, and then try to enter another name of the place, if not found, the location may not be in our database. 24 / 25

25 Navigation system to the selected road "far away" There is a blank on the map The navigation system will consider various aspects of the road search, in addition to distance will also consider the level of the road, cross regulation, viaduct, the main road, in short, to facilitate the driver in the shortest possible time to reach the destination. It may be that the navigation scale is set too large or too small. Try changing the size of the scale to see if you can resume the map display. If it is not resolved, it may be due to loss of positioning, please re-select a mark point. 25 / 25