Features: Descriptions: Applications: Selection Guide: LED Displays

Transcription

1 L isplays eatures: High efficiency, low power consumption. xtremely low current. Luminous evenly distributed on each segment. Low development cost. escriptions: Industrial standard size. These display provide excellent reliability in bright ambient light. These devices are made with white segments and black surface. pplications: udio equipment or Instrument panels. eneral use for digital indicators. Multimedia product. Selection uide: Part No. hip node athode Material mitting olor LS0403SR LS0403SR als Super Red LS0403SR LS0403SR ap reen Lens olor White iffused

2 L isplays bsolute Maximum Rating Ta=25 Parameter Symbol Super Red reen Unit Power issipation/segment P d mw Peak orward urrent /Segment (uty 1/10@ 1KHz) ontinuous orward urrent /Segment Recommend use current /Segment I P 0 0 m I m I 5~10 5~10 m Reverse Voltage /Segment V R 5 5 V Operating Temperature Range Topr -25~ +5 Storage Temperature Range Tstg -30 ~ +85 Solder Temperature Tsol Notes 1 This is the limit current. It is not allowed to use when the product work continuously. 2 It is recommended that the product is driven by TTL,MOS. 3 Soldering time 5 seconds. lectrical Optical haracteristics Ta=25 Parameter Symbol Super Red reen Typ. Max. Typ. Max. Unit Test ondition Luminous Intensity /Segment orward Voltage /Segment Reverse urrent /Segment ominant Wavelength Spectral Line Half Width I V mcd I =10m V V I =20m I R u V R =5V d nm I =20m nm I =20m

3 L isplays Package imensions: I.1 I.2 I.3 RP PIN *5= NOTS ll dimensions are in millimetres (mm), Tolerance is 0.25mm unless otherwise noted. Internal ircuit: ommon athode I.1 I.2 I.3 RP RP RP NO ONNT ommon node I.1 I.2 I.3 RP RP RP NO ONNT

4 L isplays Package imensions: I.1 I.2 I.3 PIN *10= NOTS ll dimensions are in millimetres (mm), Tolerance is 0.25mm unless otherwise noted. Internal ircuit: ommon athode 11 I.1 I.2 I ommon node 11 I.1 I.2 I

5 L isplays Package imensions: I.1 I.2 I.3 RP PIN *5= NOTS ll dimensions are in millimetres (mm), Tolerance is 0.25mm unless otherwise noted. Internal ircuit: ommon athode 9 8 I.1 I.2 I.3 RP ,12 NO ONNT ommon node 9 8 I.1 I.2 I.3 RP ,12 NO ONNT

6 L isplays Package imensions: I.1 I.2 I.3 P2 PIN *5= NOTS ll dimensions are in millimetres (mm), Tolerance is 0.25mm unless otherwise noted. Internal ircuit: ommon athode I.1 I.2 I.3 P2 ommon node I.1 I.2 I.3 P H

7 L isplays Package imensions: I.1 I.2 I.3 RP PIN *11= NOTS ll dimensions are in millimetres (mm), Tolerance is 0.25mm unless otherwise noted. Internal ircuit: ommon athode I.1 I.2 I.3 RP RP RP 1 12 ommon node I 9 6 NO ONNT I.1 I.2 I.3 RP RP RP J 6 NO ONNT

8 L isplays Reliability Test Items and onditions NO Test Item Test onditions uration Sample c/re 1 Temperature ycle min 5min 30min 5min 50clycles 100 0/1 2 High Temp. Storage Ta= hours 100 0/1 3 Temp.& Humidity Test Ta=85 RH=85% 1000hours 100 0/1 4 Low Temp. Storage Ta= hours 100 0/1 5 Operating Life Test Ta=25 5 I=15m 1000hours 100 0/1 6 Solder Heat Tsol= s 1times 20 0/1 Typical lectro-optical haracteristics urves Spectrum istribution Relative Luminous Intensity (%) SR Ta= Wavelength λd (nm) orward urrent If (m) orward urrent vs. orward Voltage SR orward urrent If (m) orward urrent erating urve orward Voltage(Vf)-volts mbient Temperature Ta( )