Action. Camera Glasses. Instruction Manual Model: AGAC-91S. Customer Helpline

Transcription

1 Action Camera Glasses Instruction Manual Model: AGAC-91S Customer Helpline

2 Contents Warranty Details 3 Welcome 4 General Information & Safety Instructions 5 Product Overview 7 Getting Started 8 Instructions 9 Other Useful Information 11 Repair and Refurbished Goods or Parts Notice 12 2

3 Action Camera Glasses Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 3

4 Welcome Congratulations on choosing to buy an Onix product. All products brought to you by Onix are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come. 4

5 General Information & Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock. Usage conditions and restrictions Power adaptor: Only use the supplied power adaptor with these Action Camera Glasses. Do not use any other type of mains adaptor. Before plugging in the power adaptor, make sure your outlet socket is properly earthed and the voltage and circuit frequency correspond to the voltage stated on the adaptor s rating label. When charging the device, do not overload your power supply or stress the power cord, which could cause overheating and result in a fire. Do not plug the power adaptor in with wet hands, which could lead to electric shock. Unplug the power adaptor after use and before cleaning the product. Grip the plug when disconnecting, do not pull on the cord. Battery: If you have not used the recording function for a long time, make sure the Action Camera Glasses are fully charged before using them. Operating conditions: These Action Camera Glasses are not waterproof. They are designed for use in environments with temperatures between 0 40 C and humidity levels between 20 80%. Do not expose them to water, excessive heat or humidity, and extremely low temperatures. Usage at room temperature will prolong their life expectancy. Protect the lens: Do not use these Action Camera Glasses in environments with high dust density to avoid dust settling on the camera lens or other components. Usage condition: These Action Camera Glasses are supplied for sale for lawful purposes only. They must not be used for any illegal purposes. The user is fully responsible for using the product in a lawful manner. Usage restrictions: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. 5

6 General Information & Safety Instructions Children: Supervise young children to ensure they do not play with the product. Memory cards: Always handle the phone s memory card(s) with care. Protect the card(s) from static electricity and strong shocks. File security: This product is not a professional storage device. It does not guarantee the integrity and security of saved files. Always back up your important documents on the computer or other storage device. Video quality: This product is not a professional video recording device, and the video file it records is not guaranteed to be of professional quality. Shooting brightness: These Action Camera Glasses are designed for use under suitable light conditions. Do not aim the camera directly at the sun and other strong light sources in order to avoid damaging the optical parts. Do not repair: These Action Camera Glasses contain no parts you can repair yourself. Do not attempt to disassemble, repair or modify them. Damage: In case of damage, contact our after sales support line for advice on repair or replacement, or refer servicing to qualified personnel only. Cleaning: To clean these Action Camera Glasses, only use a soft, dry cloth. Make sure both the glasses and the cloth are free of dust particles shake out the cloth beforehand otherwise the dust may scratch the glasses. Do not use any liquid or spray cleaner on these glasses; do not use benzene, thinner or wax. All of these may cause damage. CAUTION! Always unplug the adaptor from the power supply before cleaning the product. Storage: Store the Action Camera Glasses, in the supplied case, in a dry place. Avoid storage in areas that are excessively hot or humid. Liability: We assume no liability for any eventual damages or injury caused by misuse of the product or noncompliance with these instructions. Safety: Do not use the glasses in situations which require special attention, such as in traffic or when performing skilled jobs. 6

7 Product Overview Features These Action Camera Glasses enable you to shoot high definition video, take high-quality photos and record high-quality audio on an external Micro SD (TF) card (not supplied). The glasses are very easy to use and come with a hard case and cleaning cloth so you can easily take them wherever you want to capture the action. The stylish design suits both men and women. Parts Built-in Battery: powers the unit 2 Camera Lens: receives the image signal 3 Power On/Off [ ] Button: switches the unit on or off 4 Mode [M] Button: switches the unit between video-recording, photo-taking and audio-only recording modes 5 Reset: resets the unit to factory default settings 6 Status Indicator: changes according to battery status and operation mode 7 2.5mm/USB Cable Socket: cable connection for the power adaptor used for charging, or for data transfer to a computer 8 Micro SD (TF) Card Slot: fits a micro SD (TF) card for recording 9 Built-in Microphone: receives the sound signal 7

8 Getting Started Before first use Unpack the product but keep all packaging materials until you have made sure your new Action Camera Glasses are undamaged and in good working order. Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach. Unwind the cord of the power adaptor to its full length and inspect it for damage. Do not use the product if any of its parts (power adaptor and USB cable) have been damaged or are not working properly. In case of damage, contact our after sales support line for advice. Read this manual to familiarise yourself with the product. Pay particular attention to the safety instructions on the previous pages. Charging and SD (TF) card installation The battery has been partially charged at the factory. To perform all functions, we recommend you fully recharge before using it for the first time. Insert the 2.5mm jack of the supplied cable into the charging socket on the Action Camera Glasses. To charge via power adaptor, insert the USB connector to the power adaptor, then firmly insert the power adaptor into a properly earthed mains socket. During charging, the status indicator flashes red. When the battery is fully charged, the indicator light will turn blue. In order to maximise the battery s maximum storage capacity, continue charging the battery for 30 to 60 minutes after the indicator light remains on brightly. Once the glasses are charged and disconnected from the computer, long-press the Power On/Off [ ] button to turn the glasses off. Before using the Action Camera Glasses for recording video or taking photos, make sure you have installed an appropriate micro SD (TF) card with a maximum storage capacity of 32GB. IMPORTANT NOTE This product is powered by a built-in high-capacity lithium polymer battery. It can be used and charged at any time. However, for the initial five times of charging, we recommend letting the battery run out completely and then charging it to saturation. This is to activate the maximum battery capacity and maintain the standard working time. 8

9 Instructions Turning on/off To turn on, long press the Power On/Off [ ] button. The status indicator will be red and then turn flashing blue. The device will be in active video-recording mode. To turn off, long press the Power On/Off [ ] button until the status indicator extinguishes. The device will save the current file and shut down. After 3 minutes of inaction, the glasses will turn off automatically. Recording video Turn on the device as described above. When the red light changes to flashing blue, the device will start video-recording. Short press the Power On/Off [ ] button once to stop recording, save the file and enter standby status. The blue light will be steady in standby videorecording mode. The system will automatically save the file once every 20 minutes and continue the recording. Taking photos Short press the Mode [M] button once to enter into photo-taking standby status. The indicator light is red. Short press the Power On/Off [ ] button once to take one photo. The red indicator light will flash once when taking the photo and saving the image. Then it returns automatically to standby status. Recording audio-only Short press the Mode [M] button twice to enter into audio-only standby status. The indicator light is both red and blue. Short press the Power On/Off [ ] button to start audio-only recording, the red light will be on and the blue light is flashing. Short press the Power On/Off [ ] button again to save the file and enter into audio-only standby status. The indicator light is both red and blue. Hints for best results When using the Action Camera Glasses, always ensure that: There is adequate light in the surrounding area. The camera is not blocked by other items. The camera is kept upright and stable. The object/action is more than 50cm away from the camera. The microphone hole is not blocked. 9

10 Instructions (Cont.) Connecting to a computer You can connect the Action Camera Glasses to a computer for data transfer in power off or standby mode. The computer will recognise the Action Camera Glasses as a USB Removable Disk. The recorded files will be saved in the the *disk\dcim\100dscim\ directory. To disconnect the Action Camera Glasses from the computer, right-click on Removable Disk and select Eject. When the system advises that the hardware can be safely removed, gently pull out the USB cable from the computer. NOTE: The time it takes to identify a removable disk will depend on your computer system and configuration. Please be patient and do not use the Action Camera Glasses during this period. If the removable disk is not recognised even after a long period, re-insert the device and make sure that your computer operating system and USB cable are both operating normally. When disconnecting the Action Camera Glasses, follow the normal procedure to avoid to damaging the computer or device. Updating Date and Time The date and time has been set at the factory. However, the Action Camera Glasses will lose date and time settings if the battery fully discharges. To update the date and time, proceed as follows: 1. Connect the 2.5mm/USB cable into the computer and then into the Action Camera Glasses. 2. Open Notepad on a PC or TextEdit on a Mac. Type in the current date and time in yyyy.mm.dd hh:mm:ss format (for example, :59:59). 3. Save the file to the root directory of the Micro SD card as time.txt. 4. Unplug the Action Camera Glasses from the computer. The Action Camera Glasses will now update their timestamp. NOTE: The time.txt file will no longer be visible on the Micro SD Card once the glasses have been unplugged from the computer and then plugged back in. Reset If the glasses function abnormally or do not respond, use a pin to press the Reset button to restore factory default settings. 10

11 Other Useful Information Troubleshooting guide Insufficient storage space: When the storage space is insufficient, the indicator light will display standby status, automatically save the current files and shut down. If you want to continue to use this video recording function, copy the necessary files to a computer and delete old stored documents in order to free up enough storage space for the new recording. Insufficient battery charge: When the battery charge is insufficient, the blue indicator light will start flashing fast and then turn off. The device will automatically save the current files and then shut down. To continue using the recorder, you must recharge the battery first. Failure to respond: If the video recorder fails to respond due to an improper operation or other reason, use a pin to press the Reset button to restart the device. Technical specifications Video format Video encoding Video resolution Video frame rate Picture format AVI M-JPEG 1280 x 720 (HD resolution) 30 fps ± 1 fps JPG Picture pixels 1600 x 1200 Image ratio 4 : 3 Charge pressure Interface type Storage support Battery type DC-5V 2.5mm Socket Micro-SD (TF Card) max. to 32GB High-capacity lithium polymer Responsible disposal At the end of its working life, do not throw this product out with your household rubbish. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling. Contact your local authorities for advice on recycling facilities in your area. Never throw the product or battery into a fire. 11

12 Action Camera Glasses Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though, refurbished parts or replacements are only used where they meet Tempo s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on or write to us at: Tempo (Aust) Pty Ltd ABN PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086 Fax: (02) Tempo Help Desk: (Aust) (Operating Hours: Mon-Fri 08:30AM to 06:00PM EST) 12