SoundMax 3. Model Number: AWS2-815 INSTRUCTION MANUAL

Transcription

1 SoundMax 3 Model Number: AWS2-815 INSTRUCTION MANUAL AUS Model: AWS2-815 Product Code: /2016

2 Welcome Congratulations on choosing to buy a BAUHN product. All products brought to you by BAUHN are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come. AUS ii Model: AWS2-815 Product Code: /2016

3 SoundMax 3 Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. AFTER SALES SUPPORT AUS Model: AWS2-815 Product Code: /2016 iii

4 Contents Welcome ii Warranty Details iii General Safety Instructions 1 Product Overview 4 Getting Started 6 Instructions 11 Troubleshooting/FAQs 15 Specifications 17 Repair and Refurbished Goods or Parts Notice 18 AUS iv Model: AWS2-815 Product Code: /2016

5 General Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock. Important Warnings and Cautions! To prevent contact with high voltage components inside, do not attempt to open the cover or the back of the speaker. There are no user-serviceable parts inside this product. AUS Do not repair the unit yourself. Only have it serviced by qualified personnel. Do not expose this product to water, rain or moisture. Do not immerse it water. Do not use it near water or where water splashes or drips. Do not touch the power plug with wet hands. Do not put the product near heat sources or in direct sunlight as this may cause the battery to explode. Electrical Safety and Cord Handling Voltage: Before plugging in the power cord, make sure your outlet voltage and circuit frequency correspond to the voltage stated on the product rating label and the outlet socket is properly earthed and readily accessible. Electrical circuit: Do not overload wall outlets, extension cords, or power boards as this can result in a risk of fire of electric shock. Protect the power adaptor: Do not kink, bend, strain or damage the supply cord and protect it from sharp edges and heat. Do not run the cord near heatproducing appliances such as radiators, stoves or irons. The excessive heat could melt the insulation and expose live wires. Cord connection: Run the cord in such a way that there will be no risk of anyone pulling it inadvertently, tripping over it or stepping on it. Make sure nothing is placed upon or against the cord. Damaged cord: If the supply cord is damaged, contact our after sales support centre. A damaged cord must be replaced by qualified personnel in order to avoid a hazard. Disconnect: Unplug the power cord from the wall outlet and disconnect the speaker if it is not going to be used for an extended period of time. When disconnecting, always grip the adaptor, do not pull on the adaptor cord. Power Adapter: This device will remain on while connected to a live power socket. To turn off, please unplug the device. Danger of explosion: If the battery is incorrectly replaced, there is a danger of an explosion. Only replace the battery with the same or equivalent type. Batteries: A battery pack or batteries are installed in this device, Do not exposed this device to radiant heat or naked flames such as direct sunshine or fire Model: AWS2-815 Product Code: /2016 1

6 General Safety Instructions (Cont.) Usage Conditions and Restrictions Installation and adjustments: The product must be installed in accordance with local laws. Follow the instructions in this manual when installing and adjusting the product. Only adjust those controls that are covered in this manual, as improper adjustment of other controls may result in damage and/or expose you to danger. We assume no liability for any eventual damages caused by improper use or incorrect handling. Avoid installation in the following locations: Places exposed to direct sunlight or close to heat radiating appliances. Dusty, humid or moist places. Places subject to constant vibration. Attachments: Only use attachments sold with the product or recommended by the product distributor. Only use the power adapter that is supplied with this unit. Usage restriction: This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children: Supervise young children to ensure they do not play with the product. Children may not comprehend the presence of potential risks. Batteries and small parts represent potential choking hazards. Keep batteries out of reach of children. If a battery is swallowed, seek medical help immediately. Keep packaging materials away from children as there is danger of suffocation. Safe Usage Placement: Place the product on a straight, rigid and stable surface. Do not place anything underneath the product. Protect from heat and interference: Do not place the product near heat sources such as radiators, stoves or other appliances that produce heat. Keep the unit away from sources of electrical noise such as fluorescent lamps or motors. Prevent overheating: Place the product in a sufficiently ventilated place. Allow at least 5cm spacing around the unit to prevent overheating. Do not place the product on top of another appliance that may cause overheating (for example, a receiver or amplifier). AUS Model: AWS2-815 Product Code: /2016

7 General Safety Instructions (Cont.) Holes, slots and openings: Do not push any objects into holes, slots or openings on the unit. This could result in fatal electric shock. Handle with care: Press the buttons gently; pressing them too hard can damage the speaker. Do not drop the product or subject it to harsh impacts or excessive vibrations. Climatic conditions: Take special care when using this product in tropical/ moderate climatic conditions. Do not use it in extremely dry environments as this could lead to static discharge, which can damage the speaker. Prevent damage: Do not place the product near other items that may damage it, such as naked flame sources (lit candles) or objects containing water (a vase). Take care that no objects fall and no liquids are spilled into any openings or vents. Damage: Do not operate the unit if it is not working normally or has been damaged in any way. Turn the unit off, unplug the power plug and contact our after sales support centre for advice. Care and Cleaning Dusting only: Clean the unit only with a soft, dry cloth. Do not use chemical cleaning agents on any part of the product. Do not open: Do not remove the cover or the back of this product. There are no user-serviceable parts inside this product. Repair: Do not attempt to repair or service the unit beyond those methods described in this instruction manual. Service methods not covered in the operating instructions should be referred to qualified service personnel. Service: Contact the after sales support line and arrange a service by qualified service personnel in the following circumstances: The power adaptor has been damaged. Objects have fallen into or liquid has been spilled into the product. The unit has been exposed to rain. The unit has been dropped or damaged. The unit exhibits a marked change in performance or does not operate normally. AUS Model: AWS2-815 Product Code: /2016 3

8 Product Overview Top View Wi-Fi 2. Vol-/Previous 3. Vol+/Next 4. Play/Pause 5. Power ON/OFF 6. Indication Light Back View Line-IN 8. Adapter 15V-1.2A 9. USB (USB Charger Function) 10. Reset AUS Model: AWS2-815 Product Code: /2016

9 Product Overview (Cont.) Buttons and Functions Wi-Fi: Switch between Wi-Fi mode, Bluetooth mode, Line-In mode and USB charging mode. Vol-/Previous: Decrease the volume. Double press to go to the previous track in Bluetooth and Wi-Fi mode. Vol+/Next: Increase the volume. Double Press to go to the next track in Bluetooth and Wi-Fi mode. Play/Pause: Play/Pause music media. Mute music in Line-In mode. Power ON/OFF: Power ON/OFF the speakers. Indication Lights: Mode Product Status LED Light Indication Charging adapter connected Wi-Fi Line-In Power off Charging input while the speaker power is on Charging complete while the speaker power is off Charging complete while the speaker power is on Disconnected Connected Pairing Insert the line in cable Slow Flash Red Slow Flash Red (while paired slave speaker, blue light flash quickly and red light off) Solid Red Red light off (Blue light maintain the same status under current mode) Flash Blue Solid Blue Quick Flash Blue Solid Blue USB Charging output Solid Blue Bluetooth Disconnected Connected Flash Blue Solid Blue Line-IN: To play music through an AUX cable. Adapter 15V-1.2A: To connect the DC adapter. Reset: To restart the unit. USB: Charge your Smart Phone or Tablet via the USB port. AUS Model: AWS2-815 Product Code: /2016 5

10 Getting Started Turning ON To turn this unit ON, press and hold the Power ON/OFF button. When the unit turns on, a welcome voice will be heard and the indicator light will flash Blue. In order to connect this device to your Wi-Fi, you need to know your network credentials. Charging To power and charge this unit, plug your DC adaptor into a power outlet, plug the other end into the DC Port of the speaker and turn on the power switch. This unit can also be powered on the go with the built-in rechargeable battery. NOTE: The Unit will remain on while charging through the adapter. USB Charging You can charge your Smartphone or Tablet through the USB port on the back of this unit. Turn the unit on and press the Wi-Fi button on the top of the unit and select Charging Out mode. Your devices will still charge if the unit is turned off and plugged into the mains power outlet via the DC adapter. If the unit is being powered by the built-in battery, the charging function is only available if the unit is turned on and USB charge mode is selected. NOTE: You will need your device s USB charging cable. The charging function may not be compatible with some products. Minimum Requirements This device is compatible with iphone, ipod Touch and ipad devices running on ios 6.0 or later and Android or later. Certain features will require higher versions of the ios and Android software. Your Home Network To access music services, Internet radio and any digital music stored on your smart device or Network-Attached Storage (NAS) device, your home network must meet the following requirements: Home Network Requirements NOTE: If you want to stream music through built-in App features such as Spotify, you will need to have a high speed internet connection. (Playback experience may differ depends on your internet connection speed.) If you are going to use the SoundMax controller App on Android or ios devices. A Wi-Fi Network will be required for operating the SoundMax Speaker and the SoundMax App You need to have your Wi-Fi network SSID and password. Your network configuration should not be in isolation mode. AUS Model: AWS2-815 Product Code: /2016

11 Getting Started (Cont.) Installing the SoundMax App For Android Devices Open the Google Play Store on your Smartphone or Tablet and search for the SoundMax App. Install the App to your Android device. When you open the App for the first time, it will search for the available SoundMax units that are connected to the Wi-Fi network. The names of the found devices will be displayed under the Device List menu. In the Device list you can change the volume, the stereo mode and the device name. You can also check your SoundMax 3 device information, set a password for its built-in Wi-Fi network and reset the unit back to its original factory settings. NOTE: This App is subjected to change due to updates without prior notice. AUS Model: AWS2-815 Product Code: /2016 7

12 Getting Started (Cont.) For ios Devices Open the App store and search for the SoundMax App. Install the App to your ios device. When you open the App for the first time, it will search for available SoundMax units connected to the home Wi-Fi network. The names of the devices found will be displayed under the Device List menu. In the Device List you can change the volume, the stereo mode and the device name from this menu. You can also check your SoundMax 3 device information, set a password for its built-in Wi-Fi network and reset it to the original factory settings. In addition you can set an alarm on your SoundMax unit and set a sleep timer for it to turn off. NOTE: This App is subjected to change due to updates without prior notice. Playing Music Your SoundMax unit has the ability to play music wirelessly through the SoundMax App. You can play the music that you have stored on your ios or Android device, or you can stream music from iheartradio or Spotify. Swipe right twice from the Device List screen on the App to access the menu. AUS Model: AWS2-815 Product Code: /2016

13 Getting Started (Cont.) Connect your SoundMax Device to your Home Network Turn on your SoundMax 3 speaker. Install the SoundMax App to your Smartphone or Tablet. (Refer to pages 7 and 8 for instructions.) Ensure that your Smartphone is connected to the same network that you are connecting your SoundMax unit to. Open the SoundMax App and you will see screen 1, as illustrated on the right. Hold the Wi-Fi button until the blue LED light flashes rapidly in the Wi-Fi channel. (Screen 2). The App will then ask you to input the password of the Wi-Fi network that your Smartphone is connected to. (Screen 3) Press next and the App will then start to search for your SoundMax unit and will configure it accordingly, as illustrated in screen 2 on the right. If your enter your Wi-Fi network password correctly, you will see screen 4, as illustrated on the right. Screen 1 Screen 2 Screen 3 Screen 4 AUS Model: AWS2-815 Product Code: /2016 9

14 Getting Started (Cont.) NOTE: You cannot have two units with same name in the SoundMax app. When you open the app for first time, after setting up a unit a pop up menu will come up and you can select the name from pre-defined names or write desired name for your unit. This will help you to easily differentiate units from each other on different location. Advanced Network Setup Turn on your SoundMax 3 speaker. Open the Wi-Fi discovery menu on your Smartphone or Tablet and look for the SoundMax 3 Service Set Identifier (SSID). Select SoundMax 3 to connect your device to the SoundMax 3 network. Open the web browser on your Smartphone or Tablet and input into the URL bar. This will lead you to the SoundMax 3 Wi-Fi setup page. Select your network from the list of available networks and input your home Wi-Fi password. Your device will disconnect from the SoundMax 3 network and the SoundMax 3 speaker will connect to your home Wi-Fi network. Your device will say Connected to indicate that your SoundMax 3 speaker has successfully connected to your home Wi-Fi network. NOTE: When you have two units with the same model number, you need to configure them separately. Simply turn on one of the SoundMax units, connect it to your Wi-Fi network and turn it off. Then follow the same instruction for the second unit. AUS Model: AWS2-815 Product Code: /2016

15 Instructions My Music Through My Music you can access the music that you have saved on your ios or Android device s internal storage. Once you enter the My Music menu you will see the following options: iphone or Phone Home Music Share Playlist Recently Played Select the desired option to listen to your music. iheartradio iheartradio allows you to stream radio stations to your SoundMax 3 device. Enter the menu and select iheartradio. Select Genre to choose the genre of radio you would like to listen to or select Country and then the Region to select localised radio stations. AUS Model: AWS2-815 Product Code: /

16 Instructions (Cont.) Spotify In order to use Spotify on your SoundMax speakers you need to install Spotify on your connected Smartphone or Tablet. Go to the App Store or the Play Store and search for the Spotify App. Install the App and login into your account. If you do not have an account you will need to set one up. NOTE: In order to use Spotify on your SoundMax 3 unit, you need to subscribe to a premium Spotify account. The Spotify software is subject to third party licenses found here: AUS Model: AWS2-815 Product Code: /2016

17 Instructions (Cont.) AirPlay You can play music through AirPlay on your ios device. To do this you need to ensure that your ios device and the SoundMax 3 speakers are connected to the same Wi-Fi network. Swipe up from the bottom of your ios device and select AirPlay. Select SoundMax 3 and start playing your music. NOTE: On multi-channel mode when you have two or more SoundMax units together, selecting AirPlay will play the selected music on all the speakers. Ensure that you increase the volume on the unit when listening to music on AirPlay. Bluetooth To use the Bluetooth feature, press the Wi-Fi button once and your unit will go to Bluetooth mode. Search for Bluetooth devices on your Bluetooth enabled device and select SoundMax 3. Your device will be paired with SoundMax 3 and you can play music via Bluetooth. Line-In Jack You can connect your music player to the SoundMax speakers via the 3.5mm stereo analogue audio cable. Connect one end to the Line-In socket on your SoundMax 3 speakers and the other end to the headphone jack on your Smartphone or Tablet to play music. Factory Reset To factory reset your SoundMax 3 speakers, open the App on your Smartphone or Tablet and select Settings. Then select Speaker Info and choose Restore Factory Settings. AUS Model: AWS2-815 Product Code: /

18 Instructions (Cont.) Adding to an Existing SoundMax System You can connect two or more SoundMax speakers together to create a surround sound and multi-room listening experience. In order to do this you need to ensure that all your SoundMax units are connected to the same Wi-Fi network. In the SoundMax App, go to Device List and drag one SoundMax device on top of the other (repeat for additional SoundMax speakers), once connected the speakers on the device list illustrate a connection with a joint line. NOTE: Drag one device towards another until you see the words Release to multi mode with (device name). NOTE: While paired to more than one device in multi-room mode, Bluetooth and AUX modes are not available. To connect using these modes, first unpair the devices connected in multi-room mode. Create a Stereo Pair You can use two SoundMax units to create a wireless stereo experience. In order to do this you need to connect your SoundMax speakers together following the steps for Adding to an existing SoundMax. Then go to the Device List menu on the App and change the left speaker to and the right speaker to create the stereo experience. Firmware update If you see a New icon next to the setting button, it means a new firmware is available for your unit. In order to apply this firmware tap on New and you will see a pop up message. Plug the adapter to you SoundMax unit, turn it on and select upgrade and wait until the device upgrade process finishes. NOTE: Do not conduct any other operation via the phone or the SoundMax unit while the firmware update is in progress. AUS Model: AWS2-815 Product Code: /2016

19 Troubleshooting / FAQ s Troubleshooting Guide Symptom Unable to detect SoundMax Speakers Solution Check to make sure that the power cord is properly seated. Network issues may be preventing the product from connecting to your SoundMax system. Try moving the SoundMax components closer to the modem router. Check your modem router configuration and make sure it is not on isolation mode. Check the firewall as the firewall software on your modem router may be blocking the ports that SoundMax uses to operate. First, disable all your firewalls and try connecting again. If this solves the problem, you should configure your firewall to work with the SoundMax controller. Temporarily remove any other components that are connected to your network. When you make a change to your network configuration, you may need to power cycle the SoundMax unit by unplugging the power cord and then plugging it back in and turn it back on. AUS Model: AWS2-815 Product Code: /

20 Troubleshooting / FAQ s Troubleshooting Guide Symptom SoundMax Player is not Operating Properly Connection Issues I Have a New Router I want to Change my Wireless Network Password Solution If the status indicator is not lit and no sound is produced when the unit is plugged in, check to ensure that the power cord is properly seated. Check to ensure there are no obstacles that will impede wireless operation. Check your network connections. The SoundMax player may need to be restarted. Disconnect the power cord for 5 seconds, and then reconnect. Wait for the SoundMax speakers to restart. If you have any interference with your Wi-Fi network you should connect your NAS drive that contains your music library to your home network router using an Ethernet cable. If you forget your SoundMax Wi-Fi password, press play, vol+, power, play and power. This will reset the wireless password on your SoundMax device. Follow the instructions under the Connect your SoundMax device to your home network section. Follow the instruction under the Connect your SoundMax device to your home Network section. AUS Model: AWS2-815 Product Code: /2016

21 Specifications Technical Specifications Amplifier Speaker Output Supported Streaming Services Wi-Fi Integrated Class-D Digital Amplifier 20W Bluetooth V4.0 Line-In Input USB Output Battery Power Supply iheartradio, Spotify, Airplay b/g/n 3.5mm 5V DC, 1A (Charging Only) 11.1VDC, 2200mAh Lithium-ion DC 15V/1.2A The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners. AUS Model: AWS2-815 Product Code: /

22 SoundMax 3 Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though, refurbished parts or replacements are only used where they meet ALDI s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on or write to us at: Tempo (Aust) Pty Ltd ABN PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086 Tempo Help Desk: (Aust) (Operating Hours: Mon-Fri 08:30AM to 06:00PM EST) info@tempo.org AFTER SALES SUPPORT AUS Model: AWS2-815 Product Code: /

23 This page has been left blank intentionally. AUS Model: AWS2-815 Product Code: /

24 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on before returning it to the store for a refund. AUS Model: AWS2-815 Product Code: /2016