Aluminum Capacitors Radial Standard Miniature FEATURES APPLICATIONS MARKING

Transcription

1 037 RSM Aluminum Capacitors EATURES 013 RLC 038 RSU ig.1 Component outline. lower leakage current miniaturized lower height QUICK REERENCE DATA longer life high voltage 036 RSP 036 RSP 047 RMS 097 RLP RLP RSH DESCRIPTION VALUE Nominal case sizes ( D L in mm) 5 11 to Rated capacitance range, 0.47 to µ Tolerance on ± 20 %; ± 10 % on request Rated voltage range, U R 6.3to100V Category temperature range 40 to + 85 C Endurance test at 85 C 2000 hours Useful life at 85 C 2500 hours Useful life at 40 C, 1.4 I R applied hours Shelf life at 0 V, 85 C 500 hours Based on sectional specification IEC /EN Climatic category IEC /085/56 Polarized aluminum electrolytic capacitors, non-solid electrolyte. Radial leads, cylindrical aluminum case, insulated with a blue vinyl sleeve. Pressure relief for case D 6.3 mm. Charge and discharge proof. Miniaturized, high CV-product per unit volume. Lead (Pb)-ree versions are RoHS compliant. APPLICATIONS General purpose, industrial, automotive and audio-video. Coupling, decoupling, timing, smoothing, filtering, buffering in SMPS. Portable and mobile equipment (small size, low mass). MARKING The capacitors are marked (where possible) with the following information: Rated capacitance (in µ). Tolerance on rated capacitance, code letter in accordance with IEC (M for ± 20 %). Rated voltage (in V). Date code in accordance with IEC Code indicating factory of origin. Name of manufacturer. Negative terminal identification. Series number (037). SELECTION CHART OR, U R AND RELEVANT NOMINAL CASE SIZES (ØD x L in mm) U R (V) Pb-free Available RoHS* COMPLIANT * Pb containing terminations are not RoHS compliant, exemptions may apply or technical questions contact: aluminumcaps1@vishay.com Document Number: Revision: 16-Nov-05

2 Aluminum Capacitors 037 RSM SELECTION CHART OR, U R AND RELEVANT NOMINAL CASE SIZES (ØD x L in mm) U R (V) DIMENSIONS in millimeters AND AVAILABLE S ig.2 orm CA: Long leads. Table 1 ig.3 orm CB: Cut leads. Case D =5to8mm; pitch =5mm. ig.4 orm TA: Taped in box (ammopack), formed leads DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES Pitch see tables 1 and 2. ig.5 orm TNA, orm TA: Taped in box (ammopack), straight leads. NOMINAL PACKAGING QUANTITIES CASE MASS CASE SIZE D D CODE MAX LMAX (G) D L CA CB TA, TNA ± ± ± ± ± ± ± ± ± ± Note 1. Detailed tape dimensions see section PACKAGING. Document Number: or technical questions contact: aluminumcaps1@vishay.com Revision: 16-Nov

3 037 RSM Aluminum Capacitors ELECTRICAL DATA SYMBOL DESCRIPTION rated capacitance at 100 Hz, tolerance ± 20 % I R rated RMS ripple current at 100 Hz, 85 C I L1 max. leakage current after 1 minute at U R Tan δ max. dissipation factor at 100 Hz Z max. impedance at 10 khz Note 1. Unless otherwise specified, all electrical values in Table 2 apply at T amb =20 C, P = 86 to 106 kpa, RH = 45 to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INATION ORDERING EXAMPLE* Electrolytic capacitor 037 series 1000 μ/16 V; ± 20 % Nominal case size: mm; orm TA Catalog number: * To ensure delivery of lead (Pb)-free parts during the transition period, please contact your Vishay sales agent. CATALOG NUMBER NOMINAL I U R I R CASE SIZE L1 Z BULK PACKAGING TAN Δ TAPED AMMOPACK 1MIN 10 KHZ (V) D L 85 C LONG LEADS CUT LEADS (µa) (Ω) (MA) CA CB TA TNA or technical questions contact: aluminumcaps1@vishay.com Document Number: Revision: 16-Nov-05

4 Aluminum Capacitors 037 RSM ELECTRICAL DATA AND ORDERING INATION U R (V) NOMINAL CASE SIZE D L I R 85 C (MA) I L1 1MIN (µa) TAN Δ Z 10 KHZ (Ω) CATALOG NUMBER BULK PACKAGING TAPED AMMOPACK LONG LEADS CUT LEADS CA CB TA TNA Document Number: or technical questions contact: aluminumcaps1@vishay.com Revision: 16-Nov

5 037 RSM Aluminum Capacitors ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage U s 1.15 U R Reverse voltage U rev 1V Current Leakage current after 1 minute at U R I L U R +3µA after 5 minutes at U R I L U R +3µA Inductance Equivalent series inductance (ESL) case D 8 mm typ. 13 nh case D = 10 mm typ. 16 nh case D 12.5 mm typ. 18 nh Resistance Equivalent series resistance (ESR) calculated from tan δ max and (see Table 2) ESR = tan δ / 2πf CAPACITANCE (C) C 0 = capacitance at 20 C, 100Hz. Curve1: 6.3V. Curve 2: 100 V. ig.6 Typical multiplier of capacitance as a function of ambient temperature. IMPEDANCE (Z) Curve 1: 100 µ; 63 V. Curve 2: 220 µ; 63 V. Curve 3: 470 µ; 50 V. Curve 4: 1000 µ; 35 V. Curve 5: 2200 µ; 25 V. Curve 6: 4700 µ; 16 V. Curve 1: 100 V. Curve2: 6.3V. C 0 = capacitance at 20 C, 100Hz. T amb = 20 C. ig.7 Typical multiplier of capacitance as a function of frequency. T amb = 20 C. ig.8 Typical impedance as a function of frequency. or technical questions contact: aluminumcaps1@vishay.com Document Number: Revision: 16-Nov-05

6 Aluminum Capacitors 037 RSM RIPPLE CURRENT AND USEUL LIE 3.3 CCC205 I A I R (1) I A = actual ripple current at 100 Hz. 1.0 I R = rated ripple current at 100 Hz, 85 C. (1) Useful life at 85 C and I R applied: 2500 hours T amb ( C) ig.9 Multiplier of useful life as a function of ambient temperature and ripple current load lifetime multiplier Table 3 MULTIPLIER O RIPPLE CURRENT (I R ) AS A UNCTION O REQUENCY REQUENCY I R MULTIPLIER (Hz) U R = 6.3 to 10 V U R = 16 to 35 V U R = 40 to 100 V Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME O TEST REERENCE Endurance IEC / EN subclause 4.13 Useful life CECC subclause Shelf life (storage at high temperature) IEC / EN subclause PROCEDURE (QUICK REERENCE) T amb =85 C; U R applied; 2000 hours T amb =85 C; U R and I R applied; 2500 hours T amb =85 C; no voltage applied; 500 hours after test: U R to be applied for 30 minutes, 24 to 48 hours before measurement REQUIREMENTS U R 6.3 V; ΔC/C: + 15 / 30 % U R > 6.3 V; ΔC/C: ± 20 % tan δ 1.5 spec. limit Z 3 spec. limit I L5 spec. limit U R 6.3 V; ΔC/C: + 45 / 50 % U R > 6.3 V; ΔC/C: ± 50 % tan δ 3 spec. limit Z 3 spec. limit I L5 spec. limit no short or open circuit total failure percentage: 3 % ΔC/C, tan δ, Z: for requirements see Endurance test above I L5 2 spec. limit Document Number: or technical questions contact: aluminumcaps1@vishay.com Revision: 16-Nov

7 Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: Revision: 08-Apr-05 1