Smaller. Low Impedance. Long Life

Transcription

1 Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies Smaller case size and lower impedance than PM series. Low impedance and high reliability withstanding 0 hours to 000 hours. Capacitance ranges available based on the numerical values in E2 series under JIS. Compliant to the RoHS directive (2/95/EC). PM Smaller Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics 55 to +5 C (. to V), 0 to + 5 C (0 to 00V), to +5 C (V). to V 0.7 to 0µF ±20% at Hz, 20 C Rated voltage (V). to 0 to Leakage current PA Low Impedance PW Long Life After minute's application of rated voltage, leakage current is not more than 0.0CV or (µa), whichever is greater. TT CV < = 0 : I = 0.CV+0 (µa) max. ( minute's) CV > 0 : I = 0.0CV+ (µa) max. ( minute's) Tangent of loss angle (tan δ) Stability at Low Temperature Endurance Shelf Life Marking Radial Lead Type Sleeve (P.E.T.) For capacitance of more than 0µF, add 0.02 for every increase of 0µF. Rated voltage (V) tan δ (MAX.) Impedance ratio (MAX.) After storing the capacitors under no load at 5 C for 0 hours and then performing voltage treatment based on JIS C 5- clause. at 20 C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on dark brown sleeve. φd Rated voltage (V) Z C / Z+20 C Z 0 C / Z+20 C Z 55 C / Z+20 C The specifications listed at right shall be met when the capacitors are restored to 20 C after D.C. bias plus rated ripple current is applied for 000 hours (0 hours for φd=, 5 and., 000 hours for φd=, 00 hours for φd=, 7000 hours for φd=2.5) at 5 C, the peak voltage shall not exceed the rated voltage Type numbering system (Example : V 0µF) U 2 P W 0. 5 A Measurement frequency : Hz, Temperature : 20 C Capacitance change tan δ Leakage current M 0 2 P D 0 to Hz 5 Within ±20% of the initial capacitance value % or less than the initial specified value Less than or equal to the initial specified value φd + MAX. P ±0.5 Size code Configuration Capacitance tolerance (±20%) L + MAX. 5 MIN MIN Pressure relief vent φ.up (No pressure relief vent for 7mmL products) (L = 7).0 (L < 20).5 (L 20) 2.0 φd P φd () () : Applied to L> products ( ): Applied to 7mmL products Please refer to page 20 about the end seal configulation. Configuration φ D Pb-free leadwire Pb-free PET sleeve 5 DD. ED (7mm L : DD) PD 2.5 to HD 20 to RD Rated capacitance (0µF) Rated voltage (V) Series name Type Frequency coefficient of rated ripple current V. to 0 to Frequency 0.7 to 00 to. 90 to 0..0 to to 20 to 0. Hz Hz Hz khz khz or more.0.5 Please refer to page 20, 2, about the formed or taped product spec. Please refer to page for the minimum order quantity. Dimension table in next page. CAT.Z

2 V () (0J) 20 C / khz C / khz C / khz (A) 20 C / khz C / khz 0. 5 C / khz : In this case, will be put at 2th digit of type numbering system. CAT.Z

3 V() (C) 20 C / khz C / khz 0. 5 C / khz (E) 20 C / khz C / khz 0. 5 C / khz : In this case, will be put at 2th digit of type numbering system. : In this case, will be put at 2th digit of type numbering system. CAT.Z

4 V() R7 0 R R (V) 20 C / khz C / khz 5 C / khz (H ) 20 C / khz C / khz C / khz : In this case, will be put at 2th digit of type numbering system. CAT.Z

5 V() R7 0 R R (J) 20 C / khz C / khz C / khz (2A) 20 C / khz C / khz C / khz : In this case, will be put at 2th digit of type numbering system. : In this case, will be put at 2th digit of type numbering system V () R7 0 R 0 2C D E F V G W φ D L current at 5 C Hz Size 20 is available for capacitors marked " " Size 20 5 is available for capacitors marked " " In this case, will be put at 2th digit of type numbering system. CAT.Z