Nextiva S1800e Series. Quick Installation Guide
|
|
- Jonathan Miles
- 5 years ago
- Views:
Transcription
1 Nextiva S1800e Series Version 2.0 Quick Installation Guide for the Multiport Encoders This installation guide provides instructions for installing and performing the initial configuration. All users should read the user manuals for complete details on installation, usage and functionality. Contents of the Package One S1808e, S1808e-A, S1816e, S1816e-A or S1816e-SP video encoder featuring H.264 technology One set of rack-mount brackets with four screws (Philips M3 x 6mm pan head) One Nextiva S1800e series Quick Installation Guide Optional Accessories PS1261: ENERGY STAR qualified power supply for Nextiva S1800e series PS1282: ENERGY STAR qualified 19-inch rack mountable power supply available in two models: PS : 19-inch rack mountable power supply for up to 10 - Nextiva S1800e series encoders. PS : 19-inch rack mountable power supply for up to 20 - Nextiva S1800e series encoders. PDP10-2: 19-inch 1U power distribution panel rack mount to connect up to ten Nextiva S1800e series encoders Hardware Overview The Nextiva Multiport S1800e series multiport encoders are available in five models: S1808e, S1808e-A, S1816e, S1816e-A or S1816e-SP. Prior to adding the S1816e-SP encoder to Nextiva VMS, use SConfigurator to set the mode of the unit. The change will take effect after rebooting the unit. For information on changing the setting, see Setting the H.264 Encoding Mode for the S1816e-SP on page 6. Nextiva S1800e Series Multiport Front View LAN 1 LAN 2 Video Status Reset Status S1816e Reset Button 2 Network Connectors (RJ-45) 8 or 16 Video status LEDs Nextiva S1800e Series Multiport Rear View The audio option is only available on the S1808e-A and S1816e-A. 8 or 16 Audio Inputs with 4 or 8 mic Inputs 8 or 16 Audio Outputs System Status LED 8 or 16 Video Inputs CTS RTS RX TX +12V AUDIO IN AUDIO OUT CLASS 3 IN 1-2 MIC 1 IN 3-4 MIC 2 IN 5-6 MIC 3 IN 7-8 MIC 4 IN 9-10 MIC 5 IN MIC 6 IN MIC 7 IN MIC 8 OUT 1-2 OUT 3-4 OUT 5-6 OUT 7-8 OUT 9-10 OUT OUT OUT USB RX- RX+ TX- TX+ IN1 IN4 IN3 IN2 IN8 IN7 IN6 IN5 12V DC Input IN12 IN11 IN10 IN9 IN16 IN15 IN14 IN13 RS-232 Input IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8 2 or 4 Relay Outputs IN 9 IN 10 IN 11 IN 12 IN 13 IN 14 IN 15 IN 16 VIDEO IN USB Port +12V TX 232 RX RTS CTS TX+ 485 RX+ TX- RX- IN1 RS-422/485 Input IN2 IN3 IN4 IN5 IN6 IN7 IN8 IN9 8 or 16 Dry Contact Inputs IN10 IN11 IN12 IN13 IN14 IN15 IN16 1
2 Installing the Nextiva S1800e Series Encoder This section explains how to install a Nextiva S1800e series encoder on a desktop or flat surface and mount the encoder in a rack. NOTE: This equipment must be used in compliance with local laws and regulations. To install the Nextiva S1800e series encoder on a flat surface: 1. Remove any debris and dust from the surface as well as the surrounding area. 2. Place the encoder on the flat surface. 3. Ensure that you have access to both the front and rear of the encoder and that the fan airflow is not blocked. To install the Nextiva S1800e series encoder on a rack: 1. Align the rack-mount brackets with the holes on the side of the encoder. 2. Screw the rack-mount brackets to the encoder using 5 in-lb (0.56 N-m) force with the provided screws. 3. Slide the encoder into the 1U mounting space in the rack cabinet and ensure that the fan airflow is not blocked. 4. Secure the encoder to the rack cabinet using the screws supplied with the rack. 2
3 Connecting the Nextiva S1800e Series Encoder This section explains how to connect the video, network and power cables to the Nextiva S1800e series encoder. To connect the cables for video and network: 1. Plug the video cables from the analog cameras to the BNC connectors on the rear of the encoder. 2. Plug an ethernet cable into the LAN 1 network (RJ-45) connector on the front of the encoder. LAN 2 on the encoder is used by Verint support for debugging purposes. To connect the wiring for power: NOTE: You can use the PS1261 or any other certified power supply to connect to the Nextiva S1800e series encoder. If you plan on using a power supply other than the PS1261, ensure that it is certified with an output voltage rating of 12V DC and an output current rating of 1.8A up to 3A. The power wire gauge should be in the wire range of AWG in order to properly engage the terminal block plug. 1. Remove the terminal block plug from the rear of the encoder. 2. Verify the polarity of each wire from the power supply according to the attached label. 3. Connect the positive power wire in the corresponding +12V pole and the negative power wire in the corresponding pole on the terminal block plug and screw them into place using 1.7 in-lb (0.19 N-m) force. 4. Connect the terminal block plug to the on the rear of the encoder. 3
4 5. Connect the power supply to an outlet or UPS. 6. If required, connect the serial ports of the Nextiva S1800e encoder to the PTZ cameras. NOTE: If you are using the PS1282 power supply with a PDP10-2 power distribution panel, refer to the PDP10-2 Installation Guide that is shipped with the PDP10-2 to set up the power distribution panel. To connect the audio cable from a audio source for the S1808e-A and S1816e-A: 1. Plug the audio cable from an audio source such as a microphone to the audio/mic input connectors on the rear of the encoder. Obtaining the IP Address of the Nextiva S1800e Series Encoder By default, all Nextiva S1800e series encoders are DHCP (Dynamic Host Configuration Protocol) enabled. Use SConfigurator to obtain the IP address of the encoder. If you have a DHCP server, the encoder will automatically obtain a valid IP configuration. Otherwise, you need to manually enter a IP address. To obtain the IP address of the encoder: 1. Download the latest version of SConfigurator from: 2. Extract the executable file (SConfigurator.exe) to the desktop of the computer. 3. Start SConfigurator by double-clicking SConfigurator.exe on the desktop. 4. In the General tab, click Program Options. 4
5 5. Check Detect All Units on LAN. 6. Ensure that the VSIP Port is 5510; otherwise, click Default. 7. Ensure that the Discovery IP Address is ; otherwise, click Reset to Broadcast. 8. Click OK. 9. Select the Units tab, then click Discover. The information displayed for the Nextiva S1800e series encoder will vary depending on whether your network is using a DHCP server or not. In a DHCP environment, the Unit Name column in the Units box displays the model name and a unique alpha-numeric value that corresponds to the MAC address of the encoder. In APIPA mode, the Unit Name column in the Units box displays Unknown and the first two octets of the IP address in the Address column is Use the following procedure to set the IP address for the encoder. To set the IP address of the encoder manually: 1. Select the device in the Units box and click Configure. 2. In the Unit Name box, type a name for the encoder. 3. In the tree view, expand the Network node and click IP. 4. In the IP Address box, type an IP address for the encoder. 5. In the Subnet Mask box, type the address specifying in which subnet the IP address of the encoder belongs. 6. In the Gateway box, type the IP address of the server that acts as an access point to another network. NOTE: You do not need to use a gateway if the encoder communicates with other devices on the same subnet. 7. Click OK. 8. Click Exit to close SConfigurator. NOTE: Any configuration changes made to the encoder using Nextiva VMS will override the changes made using SConfigurator or the Web Interface. 5
6 Configuring Audio The S1808e-A and S1816e-A encoders supports audio. Use SConfigurator to set the audio settings. To configure the audio: 1. Double-click SConfigurator.exe to start SConfigurator. 2. Select the Units tab, then click Discover. 3. Select the S1808e-A or S1816e-A encoder and click Configure. 4. In the tree view, click the Audio node. 5. From the Sampling Rate list, select from 8 khz. 6. Expand the Audio node. 7. Select an Encoder to configure. Setting the H.264 Encoding Mode for the S1816e-SP The S1816e-SP supports H.264 and MPEG-4 video on all 16 ports and can be configured in dual or triple stream modes. By default, the S1816e-SP is set to dual stream mode consisting of a single high-performance H.264 stream and a single MPEG-4 stream per video input. However, you can set it to triple stream mode consisting of two H.264 streams with lower resolution and framerate and a single MPEG-4 stream per video input. To change the performance mode for the S1816e-SP: 1. Double-click SConfigurator.exe to start SConfigurator. 2. Select the Units tab, then click Discover. 3. Select the S1816e-SP encoder and click Configure. 8. Set the value for the following settings: Input Type: Select Line-in or Mic (with preamp). Input Compression: Select Uncompressed PCM (128 kbps). Gain State: Select Enabled or Disabled. Gain Level: Move the slider to the left or right. Bias State: Select Enabled or Disabled. Bias Level: Move the slider to the left or right. 9. Repeat Step 7 and Step 8 for the remaining Encoders. 10.Click OK. 11.Click Exit to close SConfigurator. 4. In the Unit Name box, from the Performance Mode list, select the H.264 streaming mode. You can select from: Single H.264: One H.264 stream and one MPEG-4 stream per video input. Dual H.264: Two H.264 streams with lower resolution and framerate and one MPEG-4 stream per video input 5. Click Reboot Unit for the change to take effect. 6. Click OK to close the Unit Configuration dialog box. 7. Click Exit to close SConfigurator. CAUTION: Once you have added the S1816e-SP to Nextiva VMS, changing the S1816e- SP's mode requires that you delete the device from Nextiva VMS and then use SConfigurator to change the mode; you will be required to add the device again in Nextiva VMS. North America: CALA: vissupport@verint.com EMEA: +44 (0) Mobile Support: +49 (0) customersupport.emea@verint.com mobilesupport@verint.com APAC: Hong Kong: Singapore: APAC_VIS_Services@verint.com Documentation To minimize our carbon footprint, we are removing the supporting product documentation CD that was shipped with our Nextiva Intelligent Edge Device products. To obtain the latest version of the manuals, please visit: Verint Video Intelligence Solutions. All Rights Reserved Worldwide. All other trademarks and product names are the property of their respective owners. Part Number: rev A00
VRM8: 19-inch rack mount panel for eight Nextiva S1800e series single and dual port devices. PSPOE: 802.3af compliant Power over Ethernet injector.
Nextiva S1800e Series Version 2.0 Quick stallation Guide for Single/Dual-Port Devices This installation guide provides instructions for installing and performing the initial configuration. All users should
More informationQuick Installation Guide
Nextiva HDR 1800 High-Definition Receiver Version 1.0 Quick Installation Guide All users should read the Nextiva HDR 1800 User Guide for complete details on installation, usage and functionality. This
More informationNextiva S FD Models
Nextiva S5100 - FD Models Quick Installation Guide All users should read the user manuals for complete details on installation, usage and functionality. Hardware Overview The S5120FD features a 2-Megapixel
More informationNextiva S1800e Series
Nextiva S1800e Series User Guide For S1808e and S1816e Series Encoder Firmware Version 2.4 SP5 S1801e and S1802e Series Encoder and Decoder Firmware Version 2.2 SP5 December 19, 2012 Copyright Notice 2012
More informationNextiva S4300-BR. Installation Guide
Nextiva S4300-BR Installation Guide Unauthorized use, duplication, or modification of this document in whole or in part without the written consent of Verint Systems Inc. is strictly prohibited. By providing
More information24-Port 100/1000X SFP + 4-Port 10G SFP+ Managed. Metro Ethernet Switch MGSW-28240F. Quick Installation Guide
24-Port 100/1000X SFP + 4-Port 10G SFP+ Managed Metro Ethernet Switch MGSW-28240F Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Requirements... 4 3. Wiring DC Power Inputs... 5
More informationInstallation and Configuration Guide
Installation and Configuration Guide Trademark Notices Comtrol, NS-Link, and DeviceMaster are trademarks of Comtrol Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation.
More informationOUTPUT COM AUDIO R RS-232 RESET. Tx Rx G
ShareLink Pro 000 Setup Guide This guide provides instructions for installing and connecting the Extron ShareLink Pro 000 Collaboration Gateway. The ShareLink Pro 000 allows anyone to present wireless
More informationL2+ 24-Port Gigabit Managed Switch with. Hardware Layer3 IPv4/IPv6 Static Routing GS S8C GS S8CR. Quick Installation Guide
L2+ 24-Port Gigabit Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing GS-5220-16S8C GS-5220-16S8CR Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Requirements... 4 3.
More informationSKYPLAY-DFS Quick Start Guide
SKYPLAY-DFS Quick Start Guide The SKYPLAY-DFS distributes HDMI high-definition audio and video up to 100 feet in both point-to-point, point-to-many, and many-to-point configurations. Each transmitter is
More informationNextiva S5000 IP Cameras. User Guide
Nextiva S5000 IP Cameras User Guide February 2013 Copyright Notice Confidential and Proprietary Information of Verint Systems Inc. 2013 Verint Systems Inc. All Rights Reserved Worldwide. www.verint.com/videosolutions
More informationOmega 4K/UHD Scaler for HDBaseT and HDMI with USB
Omega 4K/UHD Scaler for HDBaseT and HDMI with USB The Atlona is an HDBaseT receiver and 4K/UHD scaler with a local HDMI input. Part of the Omega Series of integration products for modern AV communications
More informationInstallation Guide AT-OMNI-512
OmniStream R-Type Dual-Channel Networked AV Encoder The Atlona OmniStream R-Type () is a networked AV encoder with two independent channels of encoding for two HDMI sources up to UHD @ 60 Hz and HDR, plus
More informationTRBOnet Swift A200. Radio-over-IP Gateway. User Manual. Internet. US Office Neocom Software Jog Road, Suite 202 Delray Beach, FL 33446, USA
Radio-over-IP Gateway TRBOnet Swift A200 User Manual World HQ Neocom Software 8th Line 29, Vasilyevsky Island St. Petersburg, 199004, Russia US Office Neocom Software 15200 Jog Road, Suite 202 Delray Beach,
More informationOmega 4K HDR 3x2 Matrix Switcher for HDMI and USB-C with HDMI Outputs
Omega 4K HDR x Matrix Switcher for HDMI and USB-C with HDMI Outputs The Atlona is a matrix switcher with HDMI and USB-C inputs, and HDMI outputs. It is HDCP. compliant and supports 4K HDR and 4K/60 4:4:4
More informationSConfigurator Version 6.0. User Guide
SConfigurator Version 6.0 User Guide September 17, 2010 2010 Verint Systems Inc. All Rights Reserved Worldwide. www.verint.com/videosolutions Revision Notice This is the second release of this manual.
More informationLC1003A IP Security CCTV Connector Installation Guide
LC1003A IP Security CCTV Connector Installation Guide Responsibilities Black Box Corp. declines all liability for any damage that might result from any errors or omissions in this document or from improper
More informationQuick Installation Guide
Quick Installation Guide Full HD WDR Day & Night Outdoor Network Camera This document will guide you through the basic installation process for your new D-Link Network Camera. DCS-7513 Documentation also
More informationMediant 800 Gateway and E-SBC
Mediant 800 Gateway and E-SBC Quick Setup Guide Welcome Congratulations on purchasing your AudioCodes Mediant 800 Gateway and Enterprise Session Border Controller (E-SBC), hereafter, referred to as the
More informationInstalling and Configuring Rialto Analytic Appliances
Installing and Configuring Rialto Analytic Appliances Important Safety Information This manual provides installation and operation information and precautions for the use of this camera. Incorrect installation
More informationPower Supply and Fan Module Installation
3 CHAPTER This chapter describes how to remove and install a new or replacement power supply or fan module in a Catalyst 3750-E or Catalyst 3560-E switch. See these sections: Installation Overview, page
More information8-Port 10/100Mbps + 2G TP/SFP Combo. Managed Industrial Switch ISW-1022M / ISW-1022MT / ISW-1022MP / ISW-1022MPT / ISW-1033MT
8-Port 10/100Mbps + 2G TP/SFP Combo Managed Industrial Switch ISW-1022M / ISW-1022MT / ISW-1022MP / ISW-1022MPT / ISW-1033MT Quick Installation Guide Table of Contents 1. Package Content... 3 2. Requirements...
More informationJunos WebApp Secure 5.0 Hardware Guide
Junos WebApp Secure 5.0 Hardware Guide Junos WebApp Secure 5.0 Hardware Guide This document contains a specification for the MWS1000 hardware appliance, as well as instructions for installation into a
More informationLifeSize ClearSea Installation Guide August 2012
LifeSize ClearSea Installation Guide August 2012 LifeSize ClearSea LifeSize ClearSea Virtual Machine LifeSize ClearSea Installation Guide 2 LifeSize ClearSea This guide describes how to install and configure
More informationInstallation Instructions Fig. 3 Side View. No. Label Operation
One-Camera IP Video Server In G Out G D+ D- Installation Instructions 1507280 Part Number: CM2002 - One-Camera IP Video Server CM2002 IP Video Server Features In G Out G D+ D- DO G DI G Out In Video In
More informationFOUR CHANNEL VIDEO SERVER
DS1090-150 Mod. 1090 LBT7850 FOUR CHANNEL VIDEO SERVER Ref. 1090/669 Quick Installation Guide INTRODUCTION This quick installation guide contains the instructions for installing and using the main functions
More informationTRBOnet Swift Agent A001
Radio-over-IP Gateway TRBOnet Swift Agent A001 User Manual World HQ Neocom Software 8th Line 29, Vasilyevsky Ostrov St. Petersburg, 199004, Russia US Office Neocom Software 15200 Jog Road, Suite 202 Delray
More informationInstallation Guide AT-OMNI-121
OmniStream 2 Single-Channel Networked AV Decoder The Atlona OmniStream 2 () is a networked AV decoder for an OmniStreamencoded video stream up to 4K/UHD, as well as embedded audio and RS-22 control. OmniStream
More informationInstalling the Cisco 2524 and Cisco 2525 Routers
CHAPTER 3 Installing the Cisco 2524 and Cisco 2525 Routers This chapter guides you through the installation of the Cisco 2524 and Cisco 2525 routers and includes the following sections: Required Tools
More informationHPE FlexNetwork NJ5000 5G PoE+ Walljack Switch(JH237A)
HPE FlexNetwork NJ5000 5G PoE+ Walljack Switch(JH237A) Quick Start Guide 5998-7330R The information in this document is subject to change without notice. Copyright 2016 Hewlett Packard Enterprise Development
More informationGV-IP Decoder Box Plus User s Manual
GV-IP Decoder Box Plus User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. DBPV10-UM-A 2015 GeoVision, Inc.
More informationIndustrial 24-Port 10/100/1000Mbps Managed Gigabit. Switch (-40~75 degrees C) with 4 Shared SFP Ports IGSW-24040T. Quick Installation Guide
Industrial 24-Port 10/100/1000Mbps Managed Gigabit Switch (-40~75 degrees C) with 4 Shared SFP Ports IGSW-24040T Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Requirements... 4
More informationL2+ Managed Metro Ethernet Switch MGSW / MGSD Series
L2+ Managed Metro Ethernet Switch MGSW / MGSD Series Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Requirements... 4 3. Wiring DC Power Inputs... 5 4. Terminal Setup... 6 5. Logon
More informationHVG400. Installation Guide
HVG400 Installation Guide September 2013 Trademarks & Copyright Trademarks All trademarks mentioned in this manual are the sole property of their respective manufacturers. Copyright Ltd., Jerusalem, Israel
More information1-channel MPEG-4 Video Decoder ACD Ver Quick Installation Guide
1-channel MPEG-4 Video Decoder ACD-3100 Ver. 090330 Quick Installation Guide 1 1 Getting Started 1.1 PACKAGE CONTENTS ACD-3100 Warranty Card Product CD Terminal Blocks & Screws Power Adaptor (Option)
More informationPower Supply Installation
Power Supply Module Overview, on page Installation Guidelines, on page 4 Installing or Replacing an AC Power Supply, on page 6 Installing a DC Power Supply, on page 7 Finding the Power Supply Module Serial
More informationIndoor/Outdoor PTZ IP Dome Camera
Indoor/Outdoor PTZ IP Dome Camera User Manual Camera OE-C8103 OE-C8203 www.openeye.net Important Safeguards Precautions Regulation Warning Caution C A U T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:
More informationOmega 4K / UHD Three-Input Switcher for HDMI and USB-C with HDBaseT and HDMI Outputs
Omega 4K / UHD Three-Input Switcher for HDMI and USB-C with HDBaseT and HDMI Outputs Installation Guide The Atlona is a 3 1 switcher and HDBaseT transmitter with HDMI and USB-C inputs. It features mirrored
More informationUsing Comrex ACCESS over BGAN
Using Comrex ACCESS over BGAN Version 1.0 15.01.2008 inmarsat.com/bgan Whilst the information has been prepared by Inmarsat in good faith, and all reasonable efforts have been made to ensure its accuracy,
More informationVPort P16-2MR Series Quick Installation Guide
VPort P16-2MR Series Quick Installation Guide Moxa IP Camera Edition 1.2, April 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More informationIndustrial 8-Port 10/100/1000T 802.3af/at PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature
Industrial 8-Port 10/100/1000T 802.3af/at PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature IGS-10020PT / IGS-10020HPT Quick Installation Guide Version 1.0 Table of Contents 1.
More informationServer Appliance for Atlona Management System
Server Appliance for Atlona Management System Installation Guide The Atlona is a hardware dedicated to running. Use the -HW to run the software with a local display, or anywhere on a network PC. The Atlona
More informationStereo / Mono. Audio Power Amplifier W. Introduction. Applications
Amplifier - 120 W Introduction The Atlona Gain 120 () is a compact power amplifier designed for low or high impedance applications. A mode selector switch allows the Gain 120 to deliver two channels of
More informationQuick Start Guide. GV-Video Server
Quick Start Guide GV-Video Server Thank you for purchasing GV-Video Server. This guide is designed to assist the new user in getting immediate results from the GV-Video Server. For advanced information
More informationMultiConnect Adapters
MultiConnect Adapters Serial-to-Serial Adapter Serial-to-Ethernet Adapter Quick Start Guide 2 Multi-Tech Systems, Inc. Quick Start Guide Introduction This guide shows you how to setup your MultiConnect
More information4-channel MPEG-4 Video Encoder ACD-2000Q/ACD-2000QT. Ver Quick Installation Guide
4-channel MPEG-4 Video Encoder ACD-2000Q/ACD-2000QT Ver. 090327 Quick Installation Guide 1 0 Getting Started 1.1 PACKAGE CONTENTS ACD-2000Q Power Adaptor (Option) Product CD Terminal Blocks & Screws Warranty
More information16/24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch GS P2S GS P2S. Quick Installation Guide
16/24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch GS-4210-16P2S GS-4210-24P2S Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Requirements... 4 3. Terminal
More informationReplacing the Power Supply
APPENDIX B This appendix includes information on how to replace the power supply for the Cisco AS550XM universal gateway and contains the following sections: Safety Recommendations, page B-1 Required Tools
More informationInstallation Guide. Stereo / Mono Audio Power Amplifier - 60 Watts AT-GAIN-60. Package Contents
Stereo / Mono Audio Power Amplifier - 60 Watts Installation Guide The Atlona Gain 60 () is a compact power amplifier designed for low or high impedance applications. A mode selector switch allows the Gain
More informationIN-E1004 Encoder Hardware Manual
IN-E1004 Encoder Hardware Manual 2014/06/03 Table of Contents Precautions... 4 Safety Instructions... 6 Introduction... 7 The List of Models... 7 Package Contents... 8 Physical Description... 9 Mounting
More informationUser Manual Controller. Automation and Router Control.
User Manual 2460 Controller Automation and Router Control www.s-a-m.com 2460 Controller User Manual www.s-a-m.com Contents Contents 1. Information and Notices.................................................
More informationH.264 NETWORK CAMERA
318Z H.264 NETWORK CAMERA INSTALLATION GUIDE Please read instructions thoroughly before operation and retain it for future reference. N211_211V_quick_V1.0 IMPORTANT SAFEGUARD All lead-free products offered
More informationTCD channel H.264 Video Encoder Hardware User s Manual (DC 12V) Ver. 2010/10/29
TCD-2100 1-channel H.264 Video Encoder Hardware User s Manual (DC 12V) Ver. 2010/10/29 Table of Contents 0. Precautions 3 1. Introduction 4 Package Contents... 4 Features and Benefits... 5 Safety Instructions...
More informationZOTAC ZBOX User s Manual
ZOTAC ZBOX User s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
More informationInstallation Note for the Cisco ME 3800X and ME 3600X Switch Power Supply and Fan Modules
Installation Note for the Cisco ME 3800X and ME 3600X Switch Power Supply and Fan Modules This document provides the installation and removal instructions for the AC and DC input power supply and fan modules
More informationMediaPack 1xx Analog VoIP Gateway
MediaPack 1xx Analog VoIP Gateway Quick Setup Guide Welcome Congratulations on purchasing your AudioCodes MediaPack 1xx (MP-1xx) Analog Voice-over-IP (VoIP) Media Gateway (hereafter, referred to as device)!
More informationUser s Guide. Ethernet Module for Barcode Printer
User s Guide Ethernet Module for Barcode Printer 1. ETHERNET MODULE... 2 1-1. Functions... 2 1-2. General Specifications... 2 2. ETHERNET MODULE INSTALLATION... 3 2-1. Ethernet Module Installation for
More informationMSS100 / MSS-VIA / MSS4 Quick Start Guide
Device Servers Quick Start Guide 2003 Copyright Lantronix is a registered trademark of Lantronix, Inc. All rights reserved. 900-321 Rev. A 11/03 QUICK START CONTENTS System Overview.......................................................2
More informationSmart CAT5 Switch 16 IP Installation Guide
Smart CAT5 Switch 16 IP Installation Guide International HQ Jerusalem, Israel Tel: + 972 2 535 9666 minicom@minicom.com North American HQ Linden, New Jersey Tel: + 1 908 4862100 info.usa@minicom.com European
More informationQUICK START GUIDE. STEP X - Name of Step DTX1000-T, DTX1000-R, DTX1002-T, DTX1002-R INVISAPC DTX1000/2
STEP X - Name of Step QUICK START GUIDE DTX1000-T, DTX1000-R, DTX1002-T, DTX1002-R INVISAPC DTX1000/2 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM STEP 1A - DTX1000-T Option Transmitter
More informationNetwork Video Recorder Quick Operation Guide
Network Video Recorder Quick Operation Guide UD.6L0202B1351A01 TABLE OF CONTENTS NVR Pre-Installation... 2 NVR Installation... 2 Hard Disk Installation... 2 Front Panels... 6 DS-9500NI-ST/RT Front Panel...
More informationInstallation Guide AT-OMNI-111
OmniStream Single-Channel Networked AV Encoder The Atlona OmniStream () is a networked AV encoder for one HDMI source up to 4K/UHD, plus embedded audio and RS-232 control. OmniStream is designed for distributing
More informationThe Vision of Security
Quick Start Guide GV-SNVR System The Vision of Security Thank you for purchasing GV-SNVR. This guide is designed to assist the new user in getting immediate results from the GV-SNVR. For advanced information
More informationIBM Systems. Quick start guide for IBM System p5 505 ( )
IBM Systems Quick start guide for IBM System p5 505 (9115-505) 1 Before you begin This Quick start guide contains an abbreviated set of setup instructions designed to help you quickly unpack and set up
More information1-PORT H.264 VIDEO SERVER
1-PORT H.264 VIDEO SERVER USER MANUAL DN-16100 IMPORTANT SAFEGUARD All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances
More information2 Mega-Pixel H.264 Box IP Camera ICA-HM125. Quick Installation Guide. Version 1.0
2 Mega-Pixel H.264 Box IP Camera ICA-HM125 Quick Installation Guide Version 1.0 Table of Contents Chapter 1. Introduction... 3 1.1 Before Installation... 3 1.2 System Requirements... 3 Chapter 2. Physical
More informationSetting Up Your Cisco Unified Videoconferencing 3515 MCU
CHAPTER 2 Setting Up Your Cisco Unified Videoconferencing 3515 MCU This section describes the following topics: Physical Description, page 2-1 Preparing for Installation, page 2-2 Verifying the Package
More information48-Port 10/100/1000Base-T with 4 Shared SFP. Managed Gigabit Switch WGSW Quick Installation Guide
48-Port 10/100/1000Base-T with 4 Shared SFP Managed Gigabit Switch WGSW-48000 Quick Installation Guide Table of Contents 1. Package Content... 3 2. Requirements... 4 3. Terminal Setup... 5 4. Logon to
More informationSetting Up Your Cisco Unified Videoconferencing 3500 Gateway
CHAPTER 2 Setting Up Your Cisco Unified Videoconferencing 3500 Gateway This section describes the following topics: Physical Description, page 2-1 Preparing for Installation of the Cisco Unified Videoconferencing
More informationZOTAC ZBOX User s Manual
User s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in
More informationNetwork Video Server Quick Start Guide
Network Video Server Quick Start Guide Version 1.0.0 Table of Contents 1 Hardware Installation and Connection... 1 1.1 Check Unpacked Device... 1 1.2 About Front Panel and Rear Panel... 1 1.3 After Remove
More informationSteady green On hook. Slow flashing green Off hook. Off Port not ready. Off No link. Fast flashing green Upgrading firmware.
Product Features Product Features Top Panel Feature Description Steady green On hook. Phone Phone 2 Slow flashing green Off hook. Off Port not ready. Flashing green Transmitting or receiving data through
More informationUTM Content Security Gigabit Gateway CS-950
UTM Content Security Gigabit Gateway CS-950 Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Hardware Introduction... 4 2.1 Hardware Interface... 4 2.2 Hardware Installation... 6
More informationQuick Start Guide. GV-Video Server
Quick Start Guide GV-Video Server Thank you for purchasing GV-Video Server. This guide is designed to assist new users in getting immediate results from the GV-Video Server. For advanced information on
More informationManagement Security Switch SGSD-1022 / SGSD-1022P SGSW-2840 / SGSW-2840P. Quick Installation Guide
Management Security Switch SGSD-1022 / SGSD-1022P SGSW-2840 / SGSW-2840P Quick Installation Guide Table of Contents 1. Package Content... 3 2. Requirements... 4 3. Terminal Setup... 5 4. Logon to the Console...
More informationALI-TVR7032H 32-Channel IP/HD-TVI/Analog Network Digital Video Recorder Quick Setup Guide
ALI-TVR7032H 32-Channel IP/HD-TVI/Analog Network Digital Video Recorder Quick Setup Guide This quick setup guide provides instructions to initially setup and use the ALI-TVR7032H digital video recorder
More informationL2+ Managed Gigabit/10 Gigabit Ethernet Switch GS-5220 Series
L2+ Managed Gigabit/10 Gigabit Ethernet Switch GS-5220 Series Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Requirements... 4 3. Terminal Setup... 5 4. Logon to Console... 6 5.
More informationQuick Start Guide. GV-Video Server. 1 Introduction. Packing List
Introduction Quick Start Guide GV-Video Server Welcome to the GV-Video Server Quick Start Guide. In the following sections, you will learn about the basic installations and configurations of the GV-Video
More informationR4, R8, R16 Digital Video Recorders Quick Setup Guide
R4, R8, R16 Digital Video Recorders Quick Setup Guide This guide provides instructions to initially setup the R16 (16 channel) digital video recorders (DVR). The DVR supports these advanced features: 2
More informationVideo Decoder Setup Guide
Package Content Video Decoder Setup Guide Inspect the packaging carton. Make sure the Video Decoder is properly delivered. Remove all items from the box and make sure the box contains the following items.
More informationIndustrial L2/L4 Managed Gigabit Switch. With 4-Port 802.3at PoE+ IGS P4T/IGS P4T2S. Quick Installation Guide
Industrial L2/L4 Managed Gigabit Switch With 4-Port 802.3at PoE+ IGS-4215-4P4T/IGS-4215-4P4T2S Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Requirements... 4 3. Wiring the Power
More informationSCOPIA 100 MCU Quick Start
SCOPIA 100 MCU Quick Start Version 5.6 Multipoint Conferencing Unit NOTICE 2000-2008 RADVISIONLtd. All intellectual property rights in this publication are owned by RADVISION Ltd and are protected by Italy
More informationInstalling the Cisco MDS 9020 Fabric Switch
CHAPTER 2 This chapter describes how to install the Cisco MDS 9020 Fabric Switch and its components, and it includes the following information: Pre-Installation, page 2-2 Installing the Switch in a Cabinet
More informationContents. GV-I/O Box 8 Ports Key Features Compatible Software Packing List Overview DIP Switch...
Contents GV-I/O Box 8 Ports...2 1. Key Features... 2 2. Compatible Software... 2 3. Packing List... 2 4. Overview... 3 5. DIP Switch... 3 6. Connections to PC... 4 6.1 Installing USB Driver... 5 6.2 Assigning
More informationINT-HD52 Quick Install Guide
INT-HD52 Quick Install Guide This guide is for quick installation only. For complete owners manual go to www.libav.com or use a QR reader to access the manual via QR code below. Scan QR Code with your
More informationPTZ NETWORK CAMERA SERIES
353Z PTZ NETWORK CAMERA SERIES INSTALLATION GUIDE Please read instructions thoroughly before operation and retain it for future reference. N244_245_V0.9 Powerful Remote Surveillance Distance makes no difference
More informationSFP GIGABIT MANAGED SWITCH ECO
QUICK INSTALLATI GUIDE LGB5124A-R2, LGB5128A-R2 SFP GIGABIT MANAGED SWITCH ECO 24/7 AT OR VISIT BLACKBOX.COM + + RTN + -48V RST PWR AC PWR DC SYS ALM CSOLE 28-PORT GbE MANAGED SWITCH AC INPUT: 100-240
More informationZOTAC ZBOX User s Manual
ZOTAC ZBOX User s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language
More informationIndustrial PoE Plus Outdoor IR IP Camera ICA-2250VT
Industrial PoE Plus Outdoor IR IP Camera ICA-2250VT Quick Installation Guide Table of Contents Chapter 1. Introduction... 3 1.1 Before Installation... 3 1.2 System Requirements... 3 Chapter 2. Physical
More informationMOXA VPort 2110/2140/2141 Video Server Quick Installation Guide
MOXA VPort 2110/2140/2141 Video Server Quick Installation Guide Third Edition, July 2006 MOXA Networking Co., Ltd. Tel: +886-2-2910-1230 Fax: +886-2-2910-1231 www.moxa.com support@moxanet.com (Worldwide)
More information16/24/48-Port 10/100/1000T + 2/4-Port 100/1000X SFP Managed Switch GS T2S/GS T2S/GS T4S. Quick Installation Guide
16/24/48-Port 10/100/1000T + 2/4-Port 100/1000X SFP Managed Switch GS-4210-16T2S/GS-4210-24T2S/GS-4210-48T4S Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Requirements... 4 3.
More informationMatrix KVM over IP. KV-900x. User s Guide. Copyright 2008 Beacon Computer Inc. All rights reserved. Version
Matrix KVM over IP KV-900x User s Guide Copyright 2008 Beacon Computer Inc. All rights reserved. Version 1.05 www.avextender.com 2008/11/27 1 Table of Contents 1. INTRODUCTION...3 2. UNPACKING CHECKLIST...4
More informationPart No. P May 4, Business Communications Manager. BCM Imaging Tool User Guide
Part No. P0609711 01.01 May 4, 2004 Business Communications Manager BCM Imaging Tool User Guide 2 Copyright 2004 Nortel Networks All rights reserved. May 4, 2004. The information in this document is subject
More informationVC 220 Dome WDR Day/Night PoE Network Camera
Quick Start Guide Cisco Small Business VC 220 Dome WDR Day/Night PoE Network Camera Package Contents Cisco VC 220 Network Camera Power Adapter Two L-Shaped Audio Cables Mounting and Installation Accessories
More informationUSER MANUAL. RC-74DL Master Room Controller MODEL: P/N: Rev 4
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: RC-74DL Master Room Controller P/N: 2900-000691 Rev 4 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions
More informationV3x Series Encoder Hardware Manual
V3x Series Encoder Hardware Manual V31, V32 2016/05/31 Table of Contents Precautions... 3 Safety Instructions... 5 Introduction... 6 The List of Models... 6 Package Contents... 7 Physical Description...
More informationIBM TotalStorage NAS Gateway 300 Model G27. Quick Start Instructions
IBM TotalStorage NAS Gateway 300 Model G27 Quick Start Instructions First Edition (October 2002) Copyright International Business Machines Corporation 2002. All rights reserved. US Government Users Restricted
More informationF Series Indoor Fixed IP Camera. Quick Start Guide
F Series Indoor Fixed IP Camera Quick Start Guide Welcome Thank you for purchasing our IP camera! Before install and use the IP camera, please read the following section carefully. Please keep this start
More informationQuick Start Guide. Cisco SPA100 Series Analog Telephone Adapters. SPA112 Two Port Phone Adapter SPA122 ATA with Router
Quick Start Guide Cisco SPA100 Series Analog Telephone Adapters SPA112 Two Port Phone Adapter SPA122 ATA with Router Package Contents Analog Telephone Adapter Ethernet Cable Power Adapter Quick Start Guide
More informationDominion KX III User Station
Dominion KX III User Station Quick Setup Guide Thank you for purchasing Raritan's Dominion KX III User Station, a high-performance appliance dedicated to access Raritan's enterprise-class Dominion KX III
More information