TARGET-OUT 1: DATA + 2: DATA 3: DATA OUT 4: N.C. 5: N.C. 6: N.C. 7: PS+ (24VDC) 8: GND. N.C. = Not Connected

Size: px

Start display at page:

Download "TARGET-OUT 1: DATA + 2: DATA 3: DATA OUT 4: N.C. 5: N.C. 6: N.C. 7: PS+ (24VDC) 8: GND. N.C. = Not Connected"

Caren Mason
5 years ago
Views:

1 Version 1.04

PrismTag TM Target FRONT 1 8 1 8 TARGET-IN 1: DATA + 2: DATA 3: DATA IN 4: N.C.

2 PrismTag TM Target FRONT TARGET-IN 1: DATA + 2: DATA 3: DATA IN 4: N.C. 5: N.C. 6: N.C. 7: PS+ (24VDC) 8: GND TARGET-OUT 1: DATA + 2: DATA 3: DATA OUT 4: N.C. 5: N.C. 6: N.C. 7: PS+ (24VDC) 8: GND N.C. = Not Connected

3 D1 D1 Rel1 1N4007 Rel1 1N4007 max. 1A/24V max. 1A/24V PS+: 12-24VDC PrismTag TM Target REAR!tdsX:YYYY# Whereby X stands for the target number and Y stands for the digital output 1 to 4 (0 = open, 1 = closed)!tds1:1001# -> The digital outputs 1 and 4 are activated and 2 and 3 are deactivated of target number one. EXTERNAL POWER SUPPLY + EXTERNAL POWER SUPPLY GND RELAY 1 RELAY 4

PrismTag TM Target daisy chain wiring during programming and playback from card REAR 1 FRONT 1 Up to 48 PrismTag TM Targets can be connected with SHIELDED CAT6 wires via a daisy chain connection.

4 PrismTag TM Target daisy chain wiring during programming and playback from card REAR 1 FRONT 1 Up to 48 PrismTag TM Targets can be connected with SHIELDED CAT6 wires via a daisy chain connection. PS+: 12-24VDC PS: GND It is mandatory to use at least three PrismTag TM Repeater and three PrismTag TM Power Supplies for 48 PrismTag TM Targets! FRONT FRONT It is highly recommended to use even more then three PrismTag TM Power Supplies, if additional effects have to be triggered from the PrismTag TM Targets! PS+: 12-24VDC PS: GND REAR 48 FRONT 48 FRONT REAR 24 FRONT 24 FRONT FRONT FRONT FRONT PS+: 12-24VDC PS: GND... up to 48

5 PrismTag TM System alternate daisy chain wiring with two Targets & two ProCommander ProCommander #1 ProCommander #2 Target #2 Exit Target #1 Entrance If a project needs 96 instead of 48 PrismTag TM Targets two ProCommander are needed. Target #96 Target-ID #48 Target #1 Target-ID #1 Target #3 Target-ID #2 Target #2 Target-ID #1 In this example the PrismTag TM Targets are arranged alternately. It is important to keep in mind, even the Target is #4 in the alignment it is connected to ProCommander 2 and has the internal Target-ID #2, because it is the second PrismTag TM Target for this ProCommander. Target #3 is connected with ProCommander 1 and has the internal Target-ID #2. The two Targets have to be added in the same PrismTag TM Target chain of the same ProCommander. Please use SHIELDED CAT6 cables. Target #12 - #86 Target-ID #6 #43... Target #94 Target-ID #47 Target #92 Target-ID #46 Target #95 Target-ID #48 Target #93 Target-ID #47 Target #5 Target-ID #3 Target #13 - #87 Target-ID #6 #43... Target #91 Target-ID #46 Target #7 Target-ID #4 Target #9 Target-ID #5 Target #11 Target-ID #6 Target #89 Target-ID #45

PrismTag TM System daisy chain wiring with PrismTag TM Sector Targets Target #5 Target #8 Exit Target #1 Entrance Target #2 Target #3 For one ride at least two PrismTag TM Sector Targets are needed.

6 PrismTag TM System daisy chain wiring with PrismTag TM Sector Targets Target #5 Target #8 Exit Target #1 Entrance Target #2 Target #3 For one ride at least two PrismTag TM Sector Targets are needed. The first is the Sector Target Entrance and the very last is the Sector Target Exit. Sector #4 Sector #5 Sector #6 Sector #7 If a ride needs more sectors than station and ride, up to 6 additional PrismTag TM Sector Targets can be added. In between the Sector Targets can be connected up to 48 PrismTag TM Targets. Please use SHIELDED CAT6 cables. Sector #1 Sector #2 Sector #3 Target #4 Target #6 Target #7

7 Anode Cathode PrismTag TM Wand Audio 4 Ohm Loudspeaker Laserdiode PS: GND PS+: 5-24VDC USB microsd Anode Cathode external Triggerkey ATTENTION! The format of an audio file has to be like this: 01.mp3 Store it in the root directory of the microsd card.

8 PrismTag TM Scoring System network wiring POE Wi-Fi Access Point PowerSupply Power Over Ethernet LAN PrismTag TM Scoring Display Car 1 Wi-Fi Access Point PrismTag TM Scoring Display Station PrismTag TM Score Master PrismTag TM Scoring Display Car 2 only for programming LAN PrismTag TM Scoring Display Car 3 Wi-Fi Access Point PowerSupply Power Over Ethernet POE Wi-Fi Access Point PrismTag TM Scoring Display Car 4

9 PrismTag TM Scoring Display CAR network wiring CAR 01 PrismTag TM Scoring Display Car 01 FRONT PrismTag TM Scoring Display Car 01 REAR 1 CAR with 2 PrismTag TM Scoring Display CAR Connect the Wi-Fi Stick to the USB socket on the PrismTag TM Scoring Display CAR 01 FRONT. Connect the PrismTag TM Scoring Display CAR 01 REAR with the PrismTag TM Scoring Display CAR 01 FRONT via Ethernet Cable. Wi-Fi Stick with USB Shielded CAT5 Cable ATTENTION! POWER-IN max. 7-24VDC CAR 01 CAR 02 PrismTag TM Scoring Display Car 01 FRONT PrismTag TM Scoring Display Car 02 FRONT 1 CAR with 1 PrismTag TM Scoring Display CAR Connect the Wi-Fi Stick to the USB socket on the PrismTag TM Scoring Display CAR 01 FRONT. ATTENTION! POWER-IN max. 7-24VDC Wi-Fi Stick with USB Wi-Fi Stick with USB

Click-A-Tune. User Manual

Click-A-Tune. User Manual Contents Configuring the...2 Transferring data to the...2 with switch configuration...3 with switch matrix up to 3 switches...4 Changing the playback volume...5 Connections... Power requirements (Vin)...