PRODUCTS DRIVEN BY INNOVATION

Transcription

1 PRODUCTS DRIVEN BY INNOVATION

2 DRIVEN BY INNOVATION Systec & Solutions GmbH, with headquarters in Karlsruhe (Germany), is a specialized manufacturer of hardware solutions amongst others for the pharmaceutical, cosmetics and food industry. Our products have been utilized by nearly all established pharmacists for years. GMP-IT Industry-compatible & durable Regulated industries work to GMP Standards and our GMP-IT hardware systems are fully equipped to meet the challenge. An uncompromising industrial design employing only industry-compatible components guarantees longterm availability. Cleanroom-compatible & highly efficient Despite their top performance, most of our systems are encapsuled and IP65 rated. They are easy to clean and satisfy the hygiene requirements of the pharmaceutical, cosmetics and food industry. Ruggedly constructed & compatible Our systems and platforms are specifically developed for long-term operation in special production environments. They prove themselves in practice daily, dealing with vibration, shock, humidity, water, oil or dust. They are retrofitable and upgradable, compatible with established hard- and software systems, and are easy to integrate into the existing IT landscape. Our GMP-IT products are ideally suited to applications such as workstations for MES software, process control systems and ERP software, room status displays and the presentation of OEE figures.

3 INDUSTRIES PRODUCTS PHARMACEUTICAL INDUSTRY Stainless steel hardware solutions from Systec & Solutions are oriented towards GMP guidelines, easy to clean and suitable for use in cleanrooms in the pharmaceutical production sector. Touchscreens make the systems easy to operate. The operation of the multi-touchscreens works also with cleanroom gloves impeccable. Numerous interfaces, an enclosed stainless steel casing with no edges, and an IPS display offering outstanding clarity are just some of the advantages of the systems from Systec & Solutions. COSMETICS INDUSTRY Systec & Solutions GMP-IT satisfies the requirements of IP65 rating and is ideal for use in the production sector of the cosmetics industry. The HMI systems, TROLLEY systems and keyboards are all of hygienic, edge-free design and are resistant to agressive cleaning agents and disinfectants. Displays with optical bonding and PCT multi-touch provide perfect clarity. We would be pleased to help you work out an individual solution to suit your production environment. FOOD INDUSTRY Fanless Systec & Solutions PC systems with industrial components in an IP65 rated stainless steel casing satisfy the hygiene requirements of the food industry and in particular the dairy processing industry. The systems can be used in damp surroundings and dusty production environments. Cleaning with acid-based cleaning agents is also no problem. The PILOT HMI system and glass keyboards can optionally be provided with a laminated polyester film. This shatter-proof glass front then helps to ensure compliance with the HACCP safety requirements. PLATFORMS 06 THE TROLLEY CONCEPT 06 TROLLEY LIGHT INDUCTIVE 10 TROLLEY LIGHT 12 TROLLEY COMPACT 14 TROLLEY MAXI 16 TECHNICAL DATA 18 HMI SYSTEMS 20 WAVE 20 PILOT 22 CONTROL 24 CONTROL FLUSH-MOUNTED 24 VIEWSION 26 OEM SYSTEMS 28 LABORATORY WORKSTATION 30 TECHNICAL DATA 32 CLIENT SYSTEMS 40 KVM / ULTRA THIN CLIENT / IGEL THIN CLIENT 40 KEYBOARDS 42 GLASS / MEMBRANE KEYBOARDS 42 MOUNTING SYSTEMS 46 SUPPORT ARM SYSTEMS 46 EQUIPMENT 50 EX-PROTECTED SYSTEMS 52 VISUNET GMP 52 MOBILE PC SYSTEMS 54 TABLETS 54 ADDITIONS 58 SCANNER BOX 58 PRINTER BOX 62 SERVICES 66

4 PLATFORMS THE TROLLEY CONCEPT MODULAR AND COMPATIBLE INDIVIDUALLY COMBINABLE TROLLEY SYSTEMS 1 HMI systems of the WAVE and PILOT series WAVE PILOT THE TROLLEY CONCEPT Optimal for GMP conditions and cleanrooms Construction based on EHEDG guidelines The TROLLEY mobile workstation is made entirely of stainless steel in line with GMP-IT guidelines and satisfies the highest standards in the pharmaceutical, cosmetics and food industry. It is suitable for use in hygienic production environments, under GMP conditions and in cleanrooms. Work wirelessly with integrated WLAN adapter Simple installation: Plug-and-play The TROLLEY system is scalable and available in a wide variety of configurations. Modular configuration Keyboard (optional) Powerful battery (optional) The stainless steel base provides space for modern, high-energy batteries that allow autonomous power supply, thus guaranteeing full mobility over the entire working day. The TROLLEY LIGHT which can be fitted with a 5-arm base or a trapezoid stand, is an attractive, highly compact mobile workstation. The TROLLEY COMPACT not only has a spacious front drawer with plenty of room for documents and working utensils, it also permits the integration of a notebook and a label printer. Ergonomic connecting elements Stainless steel casing easy to clean Compact design Rated IP65 The TROLLEY MAXI - in Hygienic Design - can be configured as required by the customer. Our various TROLLEY systems are described in more detail on the following pages. TROLLEY COMPACT TROLLEY LIGHT with keyboard TROLLEY LIGHT 1 All TROLLEY systems can be optionally configured with a battery and WLAN for wireless use and additionally equipped with a barcode scanner. The HMI systems of the WAVE and PILOT series are compatible with the various TROLLEY versions and permit individual combination Various types of base/ base units The design and development of our GMP-IT hardware are based on the EHEDG guidelines. TROLLEY MAXI base unit 5-arm base 3-arm Base Trapezoid stand 6 7

5 PLATFORMS THE TROLLEY CONCEPT MOBILE AND WITH CUSTOMIZED CONFIGURATION FOR OPTIMUM INTEGRATION INTO THE PRODUCTION ENVIRONMENT THE TROLLEY CONCEPT Perfect integration of GMP-IT hardware in production environments Quick, inexpensive and simple installation A variety of mounting options Mobile use in multiple cleanrooms Ergonomic height adjustment (optional) Customer-specific modifications and constructions possible Rated IP65 Professional consulting also on-site Machines and installations in production facilities are always being optimized and tailored to new working conditions. Conversion creates the necessity to reorganize and rework the entire set-up. Being mounted on rollers, the TROL- LEY workstation can be moved around as required in the production environment. All TROLLEY systems can optionally be configured with a battery and WLAN for wireless operation. There is no need for complex and expensive HMI system installation and wiring work on walls, ceilings or the floor. The TROLLEY systems are always ready for use wherever they are required. up to 250 mm height adjustment All TROLLEY systems are of functional industrial design and made of stainless steel. The TROLLEYs can be combined with various HMI systems of the WAVE and PILOT series and are ready for battery integration. The TROLLEY MAXI and COMPACT are also designed to accommodate a label printer. 1 5-arm base Trapezoid stand We would be pleased to advise you on the configuration of our TROLLEY systems by telephone or on site. 1 The various mounting options, e.g. the height of the stand, can be adapted to customer requirements. To permit simple adaptation of the HMI system monitor height to suit different work situations, we can supply an ergonomic height adjustment option for TROLLEY, floor and ceiling-mounted systems. The entire height adjustment is made of stainless steel and is supported by a gas spring integrated into the telescopic tube. 3-arm Base TROLLEY COMPACT stand TROLLEY MAXI base unit 8 9

6 PLATFORMS TROLLEY LIGHT INDUCTIVE INDUCTIVE CHARGING TECHNOLOGY WITHOUT CABLES AND PLUGS TROLLEY LIGHT INDUCTIVE Optimal for GMP conditions and cleanrooms Wireless energy transfer Inductive energy transfer for the charging process and simultaneous operation without cables. User-friendly operation To ensure optimal energy transmission efficiency, the TROLLEY LIGHT INDUCTIVE is magnetically centered with the coupler. The charging process starts automatically once in position. There is no need to switch off any connected loads. Inductive charging technology Cost-efficient AGM battery Li-ion battery with high energy density and a long life (optional) With utility model and industrial design protection The TROLLEY LIGHT INDUCTIVE in particular satisfies the demand for minimal space requirement coupled with the greatest possible flexibility and modularity. In conjunction with a WLAN data link, an integrated power supply allows full system mobility. Independent power supply for sustained operation: Integrated batteries permit sustained operation to suit the ambient conditions. The energy transfer for the charging process of the integrated batteries is carried out inductively. The TROLLEY LIGHT INDUCTIVE is docked on a charging station at the wall, enabling charging and simultaneous operation of the IPC system without cables and plugs. The embedded WLAN allows working without network cables. The compact design requires little space. The TROLLEY LIGHT INDUCTIVE fulfills the requirements of an IP65 rating. The system is ideal for mobile operation in cleanrooms and environments with strict hygiene requirements. Inductive coupler integrated into the TROLLEY system Charging station for wall mounting TECHNICAL DATA OF THE TROLLEY LIGHT INDUCTIVE CAN BE FOUND ON PAGE 18. EXAMPLE CONFIGURATION TROLLEY LIGHT INDUCTIVE + PILOT KEYBOARD TNG/ES COMPACT + SCANNER HOLDER + HEIGHT ADJUSTMENT 10 11

7 PLATFORMS TROLLEY LIGHT READY-TO-CONNECT MOBILE INDUSTRIAL PLATFORMS FOR FLEXIBLE USE IN CLEANROOMS TROLLEY LIGHT Optimal for GMP conditions and cleanrooms Work wirelessly with integrated WLAN adapter Simple installation: Plug-and-play Mobile use in multiple cleanrooms Flexible and modular design Height adjustment (optional) Keyboard (optional) Powerful battery The stainless steel base provides space for modern, high-energy batteries that allow for autonomous power supply system, thus guaranteeing full mobility over the entire working day. Stainless steel casing easy to clean Compact design Rated IP65 With utility model and industrial design protection The mobile workstation TROLLEY LIGHT is designed to be ergonomic and easy to use. In combination with, for example the WAVE 224 including a PCT multi-touch display, the TROLLEY LIGHT opens up completely new possibilities for use. The ready-for-connection, mobile workstation in uncompromising industrial design with exclusively industry-compatible components guarantees a longterm availability. It can optionally be configured with a battery and WLAN for wireless operation. The workstation is ready for use straightaway without the need for costly installation work. We offer GMP compliant Monitors or Industrial PCs as well as Thin Clients. On request, we gladly design customer-specific solutions. Optional: WLAN-Antenna TROLLEY LIGHT with dual-monitor solution TECHNICAL DATA OF THE TROLLEY LIGHT CAN BE FOUND ON PAGE 18. TROLLEY LIGHT back view, optional with keyboard and scanner holder EXAMPLE CONFIGURATION TROLLEY LIGHT + WAVE 224 WITH RESISTIVE TOUCH DISPLAY + WLAN + KEYBOARD TNG/ES COMPACT + BATTERY EXAMPLE CONFIGURATION TROLLEY LIGHT + WAVE 224 WITH PCT MULTI-TOUCH AND OPTICAL BONDING + WLAN + SCANNER HOLDER + BATTERY The TROLLEY LIGHT trapezoid stand 12 13

8 PLATFORMS TROLLEY COMPACT READY-TO-CONNECT, MOBILE INDUSTRIAL PLATFORMS THE IDEAL COMPLETE SYSTEM FOR CONFINED CLEANROOMS TROLLEY COMPACT Optimal for GMP conditions and cleanrooms Work wirelessly with integrated WLAN adapter Simple installation: Plug-and-play Mobile use in multiple cleanrooms Flexible and modular design Prepared for the integration of a label printer Integrated keyboard Powerful battery The stainless steel base provides space for modern, high-energy batteries that allow for autonomous power supply system, thus guaranteeing full mobility over the entire working day. Stainless steel casing easy to clean Rated IP65 The mobile workstation TROLLEY COMPACT is ergonomically designed and easy to use. The integrated front drawer offers enough space for documents or additional workspace specific supplies. The TROLLEY COMPACT is prepared for integration a label printer including an easy access printer flap to remove the labels. The embedded WLAN and an integrated battery permit mobile operation without a network cable. The ready-for-connection mobile workstation in uncompromising industrial design with exclusively industry-compatible components guarantees a longterm availability. The workstation is ready for use straightaway without the need for costly installation work. We offer GMP compliant Monitors or Industrial PCs as well as Thin Clients. On request, we gladly design customer-specific solutions. Barcode labels can be removed through the integrated printer flap on the side. Charge level indicator TECHNICAL DATA OF THE TROLLEY COMPACT CAN BE FOUND ON PAGE 19. Telescopic rails EXAMPLE CONFIGURATION TROLLEY COMPACT + WAVE KEYBOARD ING + BATTERY Service flap 14 15

9 PLATFORMS TROLLEY MAXI READY-TO-CONNECT, MOBILE INDUSTRIAL PLATFORMS INDIVIDUALLY CONFIGURABLE TROLLEY MAXI Optimal for GMP conditions and cleanrooms Hygienic design Meets the highest hygiene standards with special seals, closed screw terminals and internal hinges. Work wirelessly with integrated WLAN adapter Simple installation: Plug-and-play Mobile use Flexible and modular design Integrated keyboard Space-saving and functional The interior of the TROLLEY MAXI is custom equipped with all important components. All components like label printers and barcode scanners are assembled, providing easy accessibility. Stainless steel casing easy to clean Rated IP65 The TROLLEY MAXI workstation - in Hygienic Design - is the ideal complete system for mobile use. Special seals, fasteners and inside hinges ensure compliance with maximum hygiene standards. An integrated ready-to-connect connector plate on the back enables the installation of peripherals (e.g. scales) on site, thus saving both time and installation expenses. The mobile workstation is based on ergonomic principles with easy access to all components. The stainless steel casing with protection rating IP65 is GMP compliant. Optionally the system can be equipped with battery charging technology. We offer GMP compliant Monitors or Industrial PCs as well as Thin Clients. On request, we gladly design customer-specific solutions. Hygienic design with optional toggle closure TROLLEY MAXI interior, prepared for a Printer system TECHNICAL DATA OF THE TROLLEY MAXI CAN BE FOUND ON PAGE 19. Keyboard ING integrated EXAMPLE CONFIGURATION EXAMPLE CONFIGURATION 16 TROLLEY MAXI + PILOT KEYBOARD ING + SCANNER CRADLE HOLDER WITH BOX TROLLEY MAXI + WAVE KEYBOARD ING TROLLEY MAXI with Scanner, back view 17

10 PLATFORMS TECHNICAL DATA PLATFORMS MODEL TROLLEY LIGHT INDUCTIVE MODEL TROLLEY LIGHT Variant Mobile GMP-IT workstation Variant Mobile GMP-IT workstation Design With device fixtures for HMI systems of the WAVE or PILOT series, as well as integrated batteries and inductive power transmission FITTINGS TROLLEY LIGHT INDUCTIVE FITTINGS TROLLEY LIGHT Base Mounting components Height adjustment Compact trapezoid stand, stainless steel, type 304, prepared for including the battery Mounting system including equipment rack mounting adapters e.g. for WAVE or PILOT Ergonomic ±250 mm height adjustment with gas spring (optional) Design Base Mounting components Height adjustment With device fixtures for HMI systems of the WAVE or PILOT series 5-arm base / trapezoid stand, stainless steel, type 304, prepared for including the battery Mounting system including equipment rack mounting adapters e.g. for WAVE or PILOT Ergonomic ±250 mm height adjustment with gas spring (optional) PHYSICAL CHARACTERISTICS TROLLEY LIGHT INDUCTIVE PHYSICAL CHARACTERISTICS TROLLEY LIGHT Power supply Battery option 1 Battery option 2 Dimensions (approx. mm) Weight TROLLEY LIGHT: Cable-free via INDUCTIVE STA- TION or power supply, INDUCTIVE STATION: V AC, Hz Li-ion batteries with integrated battery management; Integrated inductive energy transmission AGM / sealed lead-acid battery, 12 V, 56 Ah with inductive energy transfer TROLLEY LIGHT INDUCTIVE: H 510 (without extension), Base: Ø 550 Height of center of monitor: H 1450 TROLLEY LIGHT: approx. 15 kg (without flange, without battery), Charging station: approx. 7 kg Power supply Battery option 1 Battery option 2 Dimensions (approx. mm) Weight V AC, Hz Battery with charger Output 12 V DC AGM / sealed lead-acid battery, 12 V, 56 Ah AGM / sealed lead-acid battery, 12 V, 107 Ah Half-high design: Height of center of monitor: H 1170 Standard design: Height of center of monitor: H 1450, Base: Ø 730 Approx. 26 kg (without flange, without battery) Casing and surface Stainless steel, type 304, brushed Casing and surface Stainless steel, type 304, brushed Rollers With stainless steel casing, electrically conductive, 2x guide rollers with brakes, 3x guide rollers Certification CE Certification CE, FCC / IC IP Rating IP65 IP Rating IP65 TECHNOLOGY TROLLEY LIGHT INDUCTIVE TECHNOLOGY TROLLEY LIGHT Inductive charging station (transmitter) Inductive coupler (receiver) For wall-mounting or for flush-mounted integration into the wall, with external V AC power supply unit incl. inductive coupler with 240 W output. Integrated into TROLLEY back wall for wireless charging of the integrated battery. Rollers With stainless steel casing, electrically conductive, 2x guide rollers with brakes, 3x guide rollers MODEL TROLLEY COMPACT MODEL TROLLEY MAXI Variant Mobile GMP-IT workstation Variant Mobile GMP-IT workstation, developed in accordance with hygienic design Design With integrated drawer and device fixtures for HMI systems of the WAVE or PILOT series. FITTINGS TROLLEY COMPACT AUSSTATTUNG TROLLEY MAXI Desk Shelf space Integrated keyboard ING / INGR / INFA optional Design Desk With device fixtures for HMI systems of the WAVE or PILOT series Shelf space Integrated keyboard ING / INGR / INFA optional Front 1 drawer on telescopic rails, compression latch Front 1 drawer on telescopic rails with toggle closure, 1 door with hygienic deadbolt and internal hinges Printer door On side, with easy-open protection flap Printer door At front, stainless steel frame with hygienic fasteners, tight-closing with special sandwich sealing technology, with viewing window. Optionally with easy-to-open toggle closure. Handles Stainless steel, type 304, solid construction Handles Stainless steel, type 304, solid construction Base Mounting components 5-arm base, stainless steel, type 304, prepared for including a battery supply Stainless steel, type 304 mounting system including equipment rack mounting adapters e.g. for WAVE or PILOT Interior fittings Equipment PHYSICAL CHARACTERISTICS TROLLEY COMPACT PHYSICAL CHARACTERISTICS TROLLEY MAXI 2 drawers on telescopic rails to accommodate e.g. label printer, KVM receiver or scanner station. Cable manager, Scanner Cradle Holder with Box, Customer-specific mounting cut-outs Power supply V AC, Hz Power supply V AC, Hz Battery option 1 Battery with charger AGM / sealed lead-acid battery, 12 V, 56 Ah Battery option 1 Battery with charger AGM / sealed lead-acid battery, 12 V, 56 Ah Battery option 2 AGM / sealed lead-acid battery, 12 V, 107 Ah Battery option 2 AGM / sealed lead-acid battery, 12 V, 107 Ah Dimensions (approx. mm) Weight H 1160 (top of the desk, without device fixtures), Base: Ø 730, Height of center of monitor: H 1500 Approx. 65 kg (without device fixtures, without batteries) Dimensions (approx. mm) W 600 / H 1140 / D 650 Height of center of monitor: H 1450 Weight Approx. 75 kg Casing and surface Stainless steel, type 304, brushed Casing and surface Stainless steel, type 304, brushed Rollers With stainless steel casing, electrically conductive, 2x guide rollers with brakes, 3x guide rollers Certification CE, FCC / IC (optional) Certification CE, FCC / IC (optional) IP Rating IP65 IP Rating IP65 Rollers With stainless steel casing, electrically conductive, 2x guide rollers with brakes, 2x fixed casters, 4x adjustable foot (optional) 18 19

11 HMI SYSTEMS WAVE USE INNOVATIVE TECHNOLOGIES HIGHEST BRILLIANCE IN INDUSTRIAL QUALITY The HMI SYSTEM WAVE is available in different sizes. WAVE Optimal for GMP conditions and cleanrooms 19" / 21.5" / 24" / 32" / 55" LCD display with LED backlight technology IPS panel with viewing angle up to 178 at every angle PCT multi-touch display and optical bonding Touch operable with cleanroom gloves Industrial PC, Industrial Monitor, Ultra Thin Client / IGEL Thin Client Ergonomic industrial design, fully encapsulated, splashproof, dustproof, no edges, minimum clearances Numerous mounting systems for wall or base mounting available Meets the hygiene requirements of the pharmaceutical, cosmetics and food industry Rated IP65 As compared to conventional technology, the WAVE systems with IPS displays offer high brightness and distinct color presentation. An IPS display provides a viewing angle of almost 178 in all directions with almost exactly the same color and contrast. Particularly sharp images are obtained with the PCT multi-touch display with optical bonding. The WAVE HMI systems are available as Industrial Monitors, as modern Ultra Thin Clients / IGEL Thin Clients or as integrated Windows PCs with energysaving, high-performance Intel processors. They are ideal for applications such as MES software operating stations or for working with ERP software and process control systems. The WAVE HMI systems are particularly easy to clean with all standard pharmaceutical disinfectants and are exceptionally well suited to applications in the pharmaceutical industry. We gladly design customer-specific solutions on request. WAVE with keyboard and torque hinge WAVE back view TECHNICAL DATA OF THE HMI SYSTEM WAVE CAN BE FOUND ON PAGE 32. WAVE wall mounting EXAMPLE CONFIGURATION WAVE KEYBOARD TNG/ES COMPACT WAVE can also be mounted in portrait orientation 20 21

12 HMI SYSTEMS PILOT HMI-PC-SYSTEM FULLY ENCAPSULATED RUGGED INTELLIGENCE The HMI SYSTEM PILOT is available in different sizes. PILOT Optimal for GMP conditions and cleanrooms 17.3" / 19" / 21.5" LCD display with LED backlight technology IPS panel with viewing angle up to 178 at every angle PCT multi-touch display (anti-glare) and optical bonding Touch operable with cleanroom gloves; laminated polyester film to reduce reflection and guard against splinters of glass, especially for the food industry Industrial PC, Industrial Monitor, Ultra Thin Client / IGEL Thin Client Ergonomic industrial design, fully encapsulated, splashproof, dustproof, no edges, minimum clearances Numerous mounting systems available Meets the hygiene requirements of the pharmaceutical, cosmetics and food industry Rated IP65 The PILOT is the compact solution for 17.3 to 21.5 inch applications. Featuring a PCT multi-touchscreen, a capacitive power button on the front and optionally two freely assignable function keys, it offers outstanding functionality and a wide range of options. The PILOT HMI systems are available as Industrial Monitors, as modern Ultra Thin Clients / IGEL Thin Clients or as integrated Windows PCs with energy-saving, high-performance Intel processors. They are ideal for applications such as MES software operating stations or for working with ERP software and process control systems. The systems are exceptionally well suited to applications in the food industry. With a laminated protective film to reduce reflection and guard against glass shattering, they are optimally designed for specialized fields such as the dairy industry. We gladly design customer-specific solutions on request. PILOT with scanner holder PILOT side view TECHNICAL DATA OF THE HMI SYSTEM PILOT CAN BE FOUND ON PAGE 34. PILOT wall mounting EXAMPLE CONFIGURATION PILOT KEYBOARD TNG/ES COMPACT Capacitive power button 22 23

13 HMI SYSTEMS CONTROL & CONTROL FLUSH-MOUNTED The HMI SYSTEMS CONTROL / CONTROL FLUSH-MOUNTED are available in different sizes. FITTED PANELS WITH OR WITHOUT FRAME SIMPLE INTEGRATION INTO A VARIETY OF SYSTEMS PCT multi-touch display with optical bonding CONTROL / CONTROL FLUSH-MOUNTED Optimal for GMP conditions and cleanrooms for (completely flush) wall integration CONTROL: 17.3 / 19 / 21.5 / 24 / 32 LCD display with LED backlight technology CONTOL FLUSH-MOUNTED: 17.3 / 19 / 21.5 / 24 / 32 LCD display with LED backlight technology IPS panel with viewing angle up to 178 at every angle PCT multi-touch display and optical bonding Touch operable with cleanroom gloves Industrial PC, Industrial Monitor, Ultra Thin Client / IGEL Thin Client Meets the hygiene requirements of the pharmaceutical, cosmetics and food industry Rated IP65 front side TECHNICAL DATA OF THE HMI SYSTEMS CONTROL AND CONTROL FM CAN BE FOUND ON PAGE 36. The CONTROL is ideal for the applications in cleanrooms or areas with increased cleaning and hygiene standards. Rough operating conditions cannot harm it. The CONTROL IPS displays show strong colors with high color accuracy and extremely low viewing angle dependency. Low mounting depth: With an optional lowered mounting depth of only 40 mm (as a Monitor, Ultra Thin Client or Intel processor with DC power supply), the CONTROL requires very little space for installation. Mounting can be performed either with threaded bolts on the back or holes on the front. An optional protective enclosure can be inserted between the cleanroom wall and the fitted panel to ensure that the cleanroom status is maintained even when the panel is removed. The CONTROL FLUSH-MOUNTED features PCT-Multitouch with optical bonding and thus has a front made entirely of glass. As the HMI system is fitted into the cleanroom wall at the back, the front is completely flush satisfying maximum hygiene and cleaning standards without projecting edges. The multi-touch screen offers multi-finger gesture control and supports all standard operating systems. The integrated IPS display with a viewing angle of up to 178 is fixed to the touch panel by optical bonding and provides particularly sharp images. We would be pleased to perform the installation for you. Allow our expert staff to advise you - free of charge and without obligation. CONTROL in portrait orientation Glass front with back mounted carrier plate EXAMPLE CONFIGURATION CONTROL 224 CONTROL FLUSH-MOUNTED 221 CONTROL FM flush-mounted in cleanroom wall 24 25

14 HMI SYSTEMS VIEWSION IOT REMOTE DISPLAY ROOM INFORMATION DISPLAY The HMI SYSTEM VIEWSION is available in different sizes. VIEWSION IoT display for presentation of room status information 7" / 10.1" / 12.5" LCD display with LED backlight technology IPS panel for an optimum viewing angle PCT multi-touch display and optical bonding Numerous interfaces, e.g. USB, Gb Ethernet, WLAN b/g/n, Bluetooth 4.0 Simple flush-mounting, IP65 rated front Plug & Play installation with magnetic holder Optional: Stainless steel frame, splash-proof and dust-tight for wall installation (surface-mounting) Energy-saving, no fan, silent Suitable for Windows 10 IoT, ANDROID and LINUX Easy power supply with integrated power supply or PoE Optimal for GMP conditions and cleanrooms Meets the hygiene requirements of the pharmaceutical, cosmetics and food industry This intelligent, energy-efficient, network-compatible display is an ideal digital room and production status display for use under GMP conditions and in cleanrooms. VIEWSION can display the current room status, including temperature, pressure and humidity. In accordance with GMP requirements, you can display all necessary information regarding the current production and order, the batch number and the cleaning status. The VIEWSION series is especially developed for use in hygienic areas for GMP conditions and for cleanroom situations. The intelligent displays are easy to integrate into a cleanroom wall. With the flush-mounted version, simple cleaning of the IP65 rated front panel is guaranteed. A magnetic holder permits straightforward, seamless integration of the VIEWSION display. If surface-mounting on a wall is necessary, the optionally available IP65 stainless steel frame guards against the ingress of liquids and dust. The VIEWSION series does not require a fan and is operating silently. A power supply can be directly integrated into the compact casing. The brilliant, optically bonded, capacitive multi-touch display permits simple, intuitive operation of the VIEWSION. It can be incorporated into a network via Ethernet or WLAN. The data you want can be displayed on the VIEWSION straight from the network, via a browser or through your own application. VIEWSION flush-mounted in cleanroom wall VIEWSION to be mounted in the cleanroom wall TECHNICAL DATA OF THE HMI SYSTEM VIEWSION CAN BE FOUND ON PAGE 38. EXAMPLE CONFIGURATION VIEWSION

15 HMI SYSTEMS OEM SYSTEMS FULLY ENCAPSULATED STAINLESS STEEL HMI SYSTEMS FOR USE IN INSTALLATIONS The HMI SYSTEMS CONTROL OEM / PILOT OEM are available in different sizes. OEM SYSTEMS LCD display with LED backlight technology IPS panel with viewing angle up to 178 at every angle Customized modifications such as the integration of buttons and switches PCT multi-touch display and optical bonding Industrial PC, Industrial Monitor, Ultra Thin Client / IGEL Thin Client Ergonomic industrial design, fully encapsulated, splashproof, dustproof, no edges, minimum clearances Meets the hygiene requirements of the pharmaceutical, cosmetics and food industry TECHNICAL DATA OF THE OEM SYSTEMS CAN BE FOUND ON PAGE 39. The CONTROL OEM was specially developed for integration into machines, enclosures, switch cabinets and walls and requires only little installation space. The front is IP65 rated and particularly suitable for harsh operating conditions. The compact stainless steel front panel of the CONTROL OEM is ideal for applications in cleanrooms or areas with stringent cleaning and hygiene requirements. Mounting can be performed either by way of threaded bolts on the back or holes on the front. The PILOT OEM was specially developed for machine construction requirements. The system with its IP65 rated housing made entirely of stainless steel is particularly suitable for harsh operating conditions. The PILOT OEM is ideal for applications in industrial manufacturing, in cleanrooms or in areas with stringent cleaning and hygiene requirements. Whatever you require - a support arm, a swivel arm, direct wall mounting or a stand - we will be pleased to provide you with just the right mounting system. The OEM systems are optionally available with control elements or emergency stop switch. We can offer customized adaptation to particular specifications even for small series. And that of course also includes affixing your product/company logo. PILOT OEM with pushbuttons CONTROL OEM front view CONTROL OEM with pushbuttons EXAMPLE CONFIGURATION PILOT OEM BUTTONS AND EMERGENCY STOP CONTROL OEM with emergency stop 28 29

16 HMI SYSTEMS LABORATORY WORKSTATION GMP-COMPATIBLE HMI SYSTEMS COMPACT LABORATORY AND CLEANROOM WORKSTATION Laboratory workstation WAVE, side view LABORATORY WORKSTATION Optimal for GMP conditions and cleanrooms PILOT: 17.3" / 19" / 21.5" LCD display with LED backlight technology WAVE: 19" / 21,5" / 24" LCD display with LED backlight technology Touch display Industrial PC, Industrial Monitor, Ultra Thin Client / IGEL Thin Client Stainless steel table base including torque hinge Keyboard with numeric keypad and touchpad (combined) Very good cleanability Meets the hygiene requirements of the pharmaceutical, cosmetics and food industry Rated IP65 The WAVE and PILOT series with their stainless steel housing, rated IP65, are ideal for use as laboratory and cleanroom workstations. Both, the WAVE and the PILOT offer versatile configuration options, from a Monitor to an (Ultra) Thin Client or an IPC with Intel processor. Depending on the configuration of the device, the power connection and the relevant interfaces for connecting additional peripherals are located on the back. In combination with the space-saving stand the HMI systems of the WAVE and PILOT series are the ideal ergonomic solution for laboratories and cleanroom areas, where space is limited. The attached torque hinge allows the inclination angle of the devices to be adjusted as required to suit the individual user. 120 Laboratory workstation PILOT, front view Operation is possible by touch or using the IP65 rated hygienic keyboard with integrated touch pad. On request, the workstation can also be supplied with a separate IP65 wireless mouse. The functionality of the keyboard has been tested with cleanroom gloves of various thicknesses. We gladly design customer-specific solutions on request. Laboratory workstation PILOT, side view EXAMPLE CONFIGURATION PILOT KEYBOARD TNFA/ES COMPACT 30 31

17 HMI SYSTEMS TECHNICAL DATA WAVE MODEL WAVE 219 WAVE 221 WAVE 224 WAVE 232 WAVE 255 Variants Design Industrial PC, Ultra Thin Client, IGEL Thin Client, KVM Remote Panel, Monitor Compact, enclosed stainless steel housing DISPLAYS AND CONTROLS WAVE 219 WAVE 221 WAVE 224 WAVE 232 WAVE 255 Display 19" IPS LCD display (4:3) with approx. 178 viewing angle, LED backlight 21.5" IPS LCD display (16:9) with approx. 178 viewing angle, LED backlight 24" IPS LCD display (16:9) with approx. 178 viewing angle, LED backlight 32" LCD display (16:9), LED backlight 55" LCD display (16:9), LED backlight Resolution 1280 x 1024 SXGA 1920 x 1080 Full HD 1920 x 1080 Full HD 1920 x 1080 Full HD 1920 x 1080 Full HD Touchscreen Mouse emulating, analog resistive Mouse emulating, analog resistive or PCT (projected capacitive) multi-touch with optical bonding PCT (projected capacitive) multi-touch Keyboard (optional) Keyboard with glass or membrane with antibacterial surface, mounted on torque hinge with concealed cabling, with touchpad CONFIGURATIONS WAVE 219 WAVE 221 WAVE 224 WAVE 232 WAVE 255 Industrial PC Operating system System memory Storage capacity I/O Interfaces Equipment PC (optional) Ultra Thin Client / IGEL Thin Client Industrial Monitor Equipment Monitor (optional) Intel Celeron N GHz / Burst 2.16 GHz, quad-core Intel Core i3-4010u 1.7 GHz Intel Core i5-4300u 1.9 GHz / Turbo 2.9 GHz Intel Core i7-4650u 1.7 GHz / Turbo 3.3 GHz Windows 7, Windows 8.1, Windows 10; 32/64 Bit; Android (optional) 2 GB DDR3 up to 16 GB DDR3 120 GB msata SSD; SLC-SSD (optional), additional memory sizes upon request 2x RS232, 4x USB, 1x Ethernet, optional: 3x RS232, 2-4x USB 3.0, 2x Gigabit Ethernet, additional interfaces upon request WLAN, Bluetooth, RFID, Webcam, Microphone and speaker Embedded Ultra Thin Client or IGEL Thin Client for Microsoft (RDP), Vmware, Citrix, VNC and other sessions VGA; optional: DisplayPort, DVI, HDMI RFID reader, Webcam, Microphone and speaker PHYSICAL CHARACTERISTICS WAVE 219 WAVE 221 WAVE 224 WAVE 232 WAVE 255 Power supply V AC, Hz, V DC with internal power supply 24 V DC with external power supply Power consumption 40 W (Industrial Monitor) W (IPC, depending on configuration) 30 W (Industrial Monitor) W (IPC, depending on configuration) 45 W (Industrial Monitor) W (IPC, depending on configuration) 50 W (Industrial Monitor) W (IPC, depending on configuration) 130 W (Industrial Monitor) W (IPC, depending on configuration) Dimensions (approx. mm) W 445 / H 390 / D 55 W 567 / H 380 / D 55 W 615 / H 414 / D 55 W 783 / H 530 / D 60 W 1322 / H 850 / D 60 Weight Approx. 9 kg Approx. 10 kg Approx. 12 kg Approx. 23 kg Approx. 53 kg Casing Stainless steel, type 304 Surface Glass bead blasted Certification CE, FCC / IC (optional) CE, FCC / IC CE, FCC / IC (optional) IP Rating IP65 Drawing HMI system WAVE 32 33

18 HMI SYSTEMS TECHNICAL DATA PILOT MODEL PILOT 217 PILOT 219 PILOT 221 Variants Design Industrial PC, Ultra Thin Client, IGEL Thin Client, KVM Remote Panel, Monitor Compact, enclosed stainless steel casing DISPLAYS AND CONTROLS PILOT 217 PILOT 219 PILOT 221 Display 17.3" LCD display (16:9) LED backlight 19" IPS LCD display (4:3) with approx. 178 viewing angle, LED backlight Resolution 1920 x 1080 Full HD 1280 x 1024 SXGA 1920 x 1080 Full HD Touchscreen Keyboard (optional) PCT (projected capacitive) multi-touch, optical bonding with laminated protection layer front side (anti-glare) Keyboard with glass or membrane with antibacterial surface, mounted on torque hinge with concealed cabling, with touchpad CONFIGURATIONS PILOT 217 PILOT 219 PILOT " IPS LCD display (16:9) with approx. 178 viewing angle, LED backlight Industrial PC Operating systems System memory Storage capacity I/O Interfaces Equipment PC (optional) Ultra Thin Client / IGEL Thin Client Industrial Monitor Equipment Monitor (optional) Intel Celeron N GHz / Burst 2.16 GHz, quad-core Intel Core i3-4010u 1.7 GHz Intel Core i5-4300u 1.9 GHz / Turbo 2.9 GHz Intel Core i7-4650u 1.7 GHz / Turbo 3.3 GHz Windows 7, Windows 8.1, Windows 10; 32 Bit / 64 Bit; Android (optional) 2 GB DDR3 up to 16 GB DDR3 120 GB msata SSD; SLC-SSD (optional), additional memory sizes upon request 2x RS232, 4x USB, 1x Ethernet, optional: 3x RS232, 2-4x USB 3.0, 2x Gigabit Ethernet, additional interfaces upon request WLAN, Bluetooth, RFID, Webcam, Microphone and speaker Embedded Ultra Thin Client or IGEL Thin Client for Microsoft (RDP), Vmware, Citrix, VNC and other sessions VGA; optional: DisplayPort, DVI, HDMI RFID reader, Webcam, Microphone and speaker PHYSICAL CHARACTERISTICS PILOT 217 PILOT 219 PILOT 221 Power supply Power consumption V AC, Hz, V DC with internal power supply 20 W (Industrial Monitor) W (IPC, depending on configuration) 40 W (Industrial Monitor) W (IPC, depending on configuration) Dimensions (approx. mm) W 445 / H 280 / D 55 W 470 / H 400 / D 55 W 570 / H 367 / D 55 Weight Approx. 8 kg Approx. 10 kg Approx. 11 kg Casing Stainless steel, type 304 Surface Certification IP Rating Brushed CE, FCC / IC (optional) IP65 30 W (Industrial Monitor) W (IPC, depending on configuration) Drawing HMI system PILOT 34 35

19 HMI SYSTEMS TECHNICAL DATA CONTROL (FLUSH-MOUNTED) MODEL CONTROL (FM) 217 CONTROL (FM) 219 CONTROL (FM) 221 CONTROL (FM) 224 CONTROL (FM) 232 Variants Design Industrial PC, Ultra Thin Client, IGEL Thin Client, KVM Remote Panel, Monitor CONTROL: Built-in unit with brushed stainless steel front panel; CONTROL FM: Built-in unit flush mounted DISPLAYS AND CONTROLS CONTROL (FM) 217 CONTROL (FM) 219 CONTROL (FM) 221 CONTROL (FM) 224 CONTROL (FM) 232 Display 17.3" LCD display (16:9), LED backlight 19" IPS LCD display (4:3) with approx. 178 viewing angle, LED backlight 21.5'' IPS LCD display (16:9) with approx. 178 viewing angle, LED backlight 24" IPS LCD display (16:9) with approx. 178 viewing angle, LED backlight Resolution 1920 x 1080 Full HD 1280 x 1024 SXGA 1920 x 1080 Full HD 1920 x 1080 Full HD 1920 x 1080 Full HD CONTROL: 32" LCD display (16:9), LED backlight; CONTROL FM: 32" IPS LCD display (16:9), with approx. 178 viewing angle, LED backlight Touchscreen CONTROL: Mouse compatible, analog resistive or PCT (projected capacitive) multi-touch with optical bonding; CONTROL FM: PCT (projected capacitive) multi-touch with optical bonding PCT (projected capacitive) multi-touch CONFIGURATIONS CONTROL (FM) 217 CONTROL (FM) 219 CONTROL (FM) 221 CONTROL (FM) 224 CONTROL (FM) 232 Industrial PC Operating systems System memory Storage capacity I/O Interfaces Equipment PC (optional) Ultra Thin Client / IGEL Thin Client Industrial Monitor Equipment Monitor (optional) Intel Celeron N GHz / Burst 2.16 GHz, quad-core Intel Core i3-4010u 1.7 GHz Intel Core i5-4300u 1.9 GHz / Turbo 2.9 GHz Intel Core i7-4650u 1.7 GHz / Turbo 3.3 GHz Windows 7, Windows 8.1, Windows 10; 32 Bit / 64 Bit; Android (optional) 2 GB DDR3 up to 16 GB DDR3 120 GB msata SSD; SLC-SSD (optional), additional memory sizes upon request 3x RS232, 2x USB 3.0, 2x USB 2.0 (Intel Celeron 1x USB 3.0, 5x USB 2.0), 2x Gigabit Ethernet, additional interfaces upon request WLAN, Bluetooth, RFID, Webcam, Microphone and speaker Embedded Ultra Thin Client or IGEL Thin Client for Microsoft (RDP), Vmware, Citrix, VNC and other sessions DisplayPort, DVI; optional: VGA, HDMI RFID reader, Webcam, Microphone and speaker Drawing HMI system CONTROL PHYSICAL CHARACTERISTICS CONTROL (FM) 217 CONTROL (FM) 219 CONTROL (FM) 221 CONTROL (FM) 224 CONTROL (FM) 232 Power supply V AC, Hz, V DC with internal power supply Power consumption 20 W (Industrial Monitor) W (IPC, depending on configuration) 40 W (Industrial Monitor) W (IPC, depending on configuration) 30 W (Industrial Monitor) W (IPC, depending on configuration) 45 W (Industrial Monitor) W (IPC, depending on configuration) Dimensions (approx. mm) Display area W 382 / H 215 W 376 / H 301 W 477 / H 269 W 531 / H 299 W 700 / H 398 Mounting cutout CONTROL W 468 / H 310 / D 55 (D 40 optional with DC only) W 425 / H 354 / D 55 (D 40 optional with DC only) W 544 / H 340 / D 55 (D 40 optional with DC only) W 597 / H 372 / D 55 (D 40 optional with DC only) W 836 / H 516 / D 80 Mounting cutout CONTROL FM W 436 / H 269 / D 55 W 429 / H 373 / D 55 W 528 / H 336 / D 55 W 597 / H 372 / D 55 W 784 / H 466 / D 80 Front frame CONTROL W 504 / H 337 / D 4 W 494 / H 430 / D 4 W 610 / H 430 / D 4 W 660 / H 470 / D 4 W 870 / H 552 / D 4 Backside plate CONTROL FM W 466 / H 300 / D 3 W 470 / H 414 / D 3 W 570 / H 370 / D 3 W 630 / H 410 / D 3 W 826 / H 506 / D 3 Weight Approx. 9 kg Approx. 10 kg Approx. 11 kg Approx. 12 kg Approx. 20 kg Front plate CONTROL Stainless steel, type 304, brushed Front-side surface CONTROL FM Toughened glass Certification CE, FCC / IC (optional) IP Rating IP65 front side 50 W (Industrial Monitor) W (IPC, depending on configuration) Drawing HMI system CONTROL FM 36 37

20 HMI SYSTEMS TECHNICAL DATA VIEWSION HMI SYSTEMS TECHNICAL DATA OEM SYSTEMS MODEL VIEWSION 107 VIEWSION 110 VIEWSION 112 Variants Design Remote display, IoT PC Fitted unit for flush-mounted installation; optionally: encapsulated in stainless steel casing DISPLAYS AND CONTROLS VIEWSION 107 VIEWSION 110 VIEWSION 112 Display 7" IPS LCD display (16:9), with approx. 170 viewing angle, LED backlight 10.1" IPS LCD display (16:10), with approx. 170 viewing angle, LED backlight Resolution 1024 x x x 1080 Full HD PCT Multi-Touchscreen PCT (projected capacitive) multi-touch with optical bonding CONFIGURATIONS VIEWSION 107 VIEWSION 110 VIEWSION 112 Processor Operating systems System memory Storage capacity I/O Interfaces Equipment PC (optional) IoT-PC Remote Monitor ARM Cortex 1,5-1,9 Ghz quad core, Intel Atom x5 Linux, Android, Windows 10 IOT 1 GB DDR3, up to 4 GB (depending upon type) 16 GB, (up to 128 GB) flash memory min. 2x USB 2.0 (up to 6x), 1x GB Ethernet, WLAN b/g/n depending upon type, Bluetooth 4.0 depending upon type UMTS, RFID reader, Webcam, Microphone and speaker, USB 3.0 depending upon type Windows 10 IoT, Android, Linux, Windows 10 (optional), PoE (optional) HDMI, DisplayPort (optional) PHYSICAL CHARACTERISTICS VIEWSION 107 VIEWSION 110 VIEWSION 112 Power supply 5 V DC, V DC; 230 V AC Power consumption 5-15 W W W Dimensions (approx. mm) Display area W 155 / H 87 W 243 / H 162 W 306 / H 187 Mounting cutout (flush variant) W 157 / H 89 / D <40 W 245 / H 164 / D <40 W 308 / H 189 / D <45 Stainless steel frame (optional) W 173 / H 105 / D 3 W 263 / H 182 / D 3 W 328 / H 209 / D 3 Weight Approx. 1 kg Approx. 1,3 kg Approx. 1,8 kg Surface Toughened glass Certification CE IP Rating IP65 front side 12.5" IPS LCD display (16:9), with approx. 178 viewing angle, LED backlight MODEL CONTROL OEM PILOT OEM Variants Industrial PC, Ultra Thin Client, IGEL Thin Client, KVM Remote Panel, Monitor Design Built-in unit with stainless steel front panel Compact, enclosed stainless steel casing DISPLAYS AND CONTROLS CONTROL OEM PILOT OEM Displays and resolutions 17.3 LCD display (16:9), 1920 x 1080 Full HD 18.5 LCD display (16:9), 1920 x 1080 Full HD 19 IPS LCD display (4:3), 1280 x 1024 SXGA 21.5 IPS LCD display (16:9), 1920 x 1080 Full HD 24 IPS LCD display (16:9), 1920 x 1080 Full HD LED backlight 17.3 LCD display (16:9), 1920 x 1080 Full HD 18.5 LCD display (16:9), 1920 x 1080 Full HD 19 IPS LCD display (4:3), 1280 x 1024 SXGA 21.5 IPS LCD display (16:9), 1920 x 1080 Full HD LED backlight Touchscreen Buttons and switches Mouse compatible, analog resistive or PCT (projected capacitive) multi-touch with optical bonding (optional) Customer-specific integration of kill switch, buttons, switches and indicating elements CONFIGURATIONS CONTROL OEM PILOT OEM Industrial PC Operating systems System memory Storage capacity I/O Interfaces Equipment PC (optional) Ultra Thin Client / IGEL Thin Client Industrial Monitor Equipment Monitor (optional) Intel Celeron N GHz / Burst 2.16 GHz, quad-core Intel Core i3-4010u 1.7 GHz Intel Core i5-4300u 1.9 GHz / Turbo 2.9 GHz Intel Core i7-4650u 1.7GHz / Turbo 3.3 GHz Windows 7, Windows 8.1, Windows 10; 32 Bit / 64 Bit; Android (optional) 2 GB DDR3 up to 16 GB DDR3 120 GB msata SSD; SLC-SSD (optional), additional memory sizes upon request 3x RS232, 2x USB 3.0, 2x USB 2.0 (Intel Celeron 1x USB 3.0, 5x USB 2.0), 2x Gigabit Ethernet, additional interfaces upon request WLAN, Bluetooth, RFID, Webcam, Microphone and speaker 2x RS232, 4x USB, 1x Ethernet, optional: 3x RS232, 2-4x USB 3.0, 2x Gigabit Ethernet, additional interfaces upon request Embedded Ultra Thin Client or IGEL Thin Client for Microsoft (RDP), Vmware, Citrix, VNC and other sessions CONTROL OEM: VGA; optional: DisplayPort, DVI, HDMI; PILOT OEM: DisplayPort, DVI; optional: VGA, HDMI RFID reader, Webcam, Microphone and speaker PHYSICAL CHARACTERISTICS CONTROL OEM PILOT OEM Power supply Power consumption V DC, optional V AC, Hz with internal power supply W (depending on configuration) Dimensions (approx. mm) 17.3 : W 504 / H 337 / D 55, 18.5 : W 510 / H 350 / D 55, 19 : W 494 / H 430 / D 55, 21.5 : W 598 / H 417 / D 55, 24 : W 650 / H 450 / D 55 Weight Casing and surface Certification Approx kg (depending on configuration) Stainless steel, type 304, brushed CE, FCC / IC (optional) IP Rating IP65 front side IP : W 490 / H 380 / D 55, 18.5 : W 490 / H 380 / D 55, 19 : W 470 / H 450 / D 55, 21.5 : W 567 / H 423 / D

21 CLIENT SYSTEMS CLIENT SYSTEMS ULTRA THIN CLIENT LOW COSTS AND LITTLE MAINTENANCE IGEL THIN CLIENT SIMPLE AND CENTRAL REMOTE ADMINISTRATION MODEL ULTRA THIN CLIENT IGEL THIN CLIENT Product description Operating system Ultra Thin Client / IGEL Thin Client for complete integration into WAVE, PILOT and CONTROL No embedded application, no local management IGEL Thin Client Software (UDC) Administration Remote Setup per software / remote maintenance IGEL Universal Management Suite ULTRA THIN CLIENT / IGEL THIN CLIENT Safe Plug-and-play connection with Ethernet / RJ45 to server or PC Connection with USB devices possible No local software, no installation and maintenance Central administration with remote management software More economic than conventional KVM-solutions, Thin Clients or PCs Simple integration of IGEL Thin Clients into existing IGEL infrastructure IGEL Thin Client with WLAN and Bluetooth Integration of other Thin Client products possible on request Ultra Thin Client technology turns a monitor into an intelligent Thin Client without the need for a Windows operating system. It provides extremely powerful graphics capabilities for access to server systems such as Microsoft TSE (RDP, ICA protocol and VDI) or UNIX/LINUX (VNC protocol). The Ultra Thin Client is integrated into the WAVE/PILOT or CONTROL HMI system. Only a few clicks are needed to connect the monitor with Ultra Thin Client to the server. The Ultra Thin Client supports USB devices such as keyboard, mouse, scanner, printer, touchscreens, smartcard reader, audio etc. The Ultra Thin Client administration software permits remote maintenance of the remote clients. In combination with the Universal Desktop Converter, the IGEL Thin Client represents a fully equivalent alternative to standard thin client hardware. The software is installed as operating system on the WAVE / PILOT or CONTROL HMI system and turns the hardware into a powerful software-based, universally applicable thin client for secure access to a variety of IT infrastructures. The IGEL Thin Client supports WLAN and Bluetooth. SESSIONS ULTRA THIN CLIENT IGEL THIN CLIENT Resolution Max x 1200 Depending on HMI system Microsoft Citrix Vmware VNC Text Sessions TSE from NT4 to 2008R, RemoteApp and Multipoint 2011 XenApp & Metaframe and XenDesktop Vmware View Linux (VNC Client) Unix / Linux: Telnet, ssh & tty Support of all common IGEL Remote protocols, e.g. RDP, Citrix, Vmware or VNC INTERFACES ULTRA THIN CLIENT IGEL THIN CLIENT USB / RS-232 2x USB for audio, printer, scanner or smartcard reader 2x USB for touchscreen and keyboard 4x USB, 3x RS232, additional interfaces (optional) Ethernet RJ45 10 / 100BT RJ45, 10 / 100 / 1000 Mbit/s PHYSICAL CHARACTERISTICS ULTRA THIN CLIENT IGEL THIN CLIENT Power consumption 5 W Depending on HMI system Certification CE Depending on HMI system KVM PCs operate over long distances Signal transmission of KVM extender via CAT-x cable or optical fiber SCANNER HMI** Scanner can be connected to HMI system via Bluetooth HMI** WLAN HMI* HMI* HMI* Extension of the signals from keyboard, mouse, touchscreen, DVI, VGA, Audio, RS232 and USB SWITCH SERVER DATABASE Central Client-management via Remote Management Software possible SOFTWARE 40 TYPOLOGY OF AN (ULTRA) THIN CLIENT SOLUTION * Ultra Thin Client and IGEL Thin Client ** IGEL Thin Client 41

22 KEYBOARDS GLASS & MEMBRANE KEYBOARDS INDUSTRIAL KEYBOARDS RUGGEDLY CONSTRUCTED AND EASY TO CLEAN Operable with cleanroom gloves KEYBOARDS Optimal for GMP conditions and cleanrooms Ergonomically adjustable High-quality stainless steel execution Capacitive Touchpad Short stroke with tactile feedback or capacitive glass surface with audible feedback, cleaning function / Auto-Lock optional Glass keyboard optional with laminated protection film The keyboards are operable with cleanroom gloves Various keyboard layouts Meets the hygiene requirements of the pharmaceutical, cosmetics and food industry Optional with RFID Rated IP65 The keyboards are integrated in a high-quality, gap-free stainless steel casing. They are available as desktop, built-in and rack versions with glass or antibacterial membrane surfaces. All of the keyboard versions are easy to clean, optimized for use under cleanroom conditions, and meet IP65 standards. The keyboards can be mounted on a WAVE or PILOT with an adjustable torque hinge. The double torque hinge even permits wall or switch cabinet installation. 1 KEYBOARD TNG/ES COMPACT with a glass surface, mounted on adjustable torque hinge with concealed cabling. By the torque hinge the inclination angle can be adjusted ergonomically by the user. If necessary the keyboard can be inclined downwards completely. Membrane keyboard with ergonometric finger guidance and antibacterial surface 1 Torque hinge for mounting on the HMI system EXAMPLE CONFIGURATION 42 KEYBOARD TNG/ES COMPACT Double torque hinge 43

23 KEYBOARDS TECHNICAL DATA KEYBOARDS MODEL TNG/ES COMPACT TNFA/ES COMPACT ING INFA Variants Desktop unit / torque hinge, optional with laminated protection film Desktop unit / torque hinge integrable, e.g. in TROLLEY COMPACT or MAXI, optional with laminated protection film Design Stainless steel, glass surface Stainless steel, membrane keyboard Glass surface Membrane keyboard FITTINGS TNG/ES COMPACT TNFA/ES COMPACT ING INFA Touchpad (integrated) Capacitive technology, tested with cleanroom gloves of varying thickness Capacitive technology, tested with cleanroom gloves of varying thickness, resistive touchpad for wet conditions (optional) Capacitive technology, tested with cleanroom gloves of varying thickness Capacitive technology, tested with cleanroom gloves of varying thickness, resistive touchpad for wet conditions (optional) RFID Reader Optional: TNGR with integrated RFID reader Optional: TNFAR with integrated RFID reader Optional: INGR with integrated RFID reader Optional: INFAR with integrated RFID reader Keyboard layout Key specification DE, FR, DK, UK, US, BE, NL, CH, additional layouts upon request Capacitive keys with audible feedback, cleaning function, Auto-Lock (optional) Keyboard surface Glass (back-printed) Membrane, three color, antibacterial surface, print with ergonometric finger guidance Short stroke with tactile feedback Capacitive keys with audible feedback Short stroke with tactile feedback Glass (back-printed) PHYSICAL CHARACTERISTICS TNG/ES COMPACT TNFA/ES COMPACT ING INFA Membrane, three color, antibacterial surface, print with ergonometric finger guidance Keyboard TNG/ES COMPACT Keyboard TNFA/ES COMPACT Connection Cable length USB Approx. 1,6 m Dimensions (approx. mm) W 517 / H 30 / D 230 W 517 / H 30 / D 230 TNFAR: W 662 / H 30 / D 230 Weight Approx. 4,5 kg Approx. 4,5 kg TNFAR: approx. 5 kg W 482 / H 30 / D 177 W 482 / H 20 / D 177 Approx. 2 kg Approx. 2 kg Casing Stainless steel, type Surface Brushed, glass bead blasted (optional) Certification CE, FCC / IC (optional) IP Rating IP65 IP65 front side IP65 front side Keyboard TNFAR/ES COMPACT Keyboards ING und INFA 44 45

24 MOUNTING SYSTEMS SUPPORT ARM SYSTEMS FLEXIBLE SUPPORT ARM SYSTEMS THE IDEAL SOLUTION FOR LIMITED SPACE SUPPORT ARM SYSTEMS Perfect integration of GMP-IT hardware in production environment A variety of mounting options for guaranteed flexibility HMI systems can also be fitted upright Smooth transitions from the tube to other components Assembly of a flexible and ergonomic complete system Customer-specific modifications and constructions possible Rated IP65 Professional consulting also on-site Systec & Solutions is more than just a hardware product supplier. Our service includes helping you to work out which type of installation would be most appropriate for your purposes (permanent wall, floor or ceiling mounting) or whether a mobile workstation would be more suitable for the processes involved. We would also be pleased to visit you on site to evaluate the situation. Once the components have been selected and the details of technical implementation finalized, our experienced service team will be pleased to perform the installation for you. We can also offer you assistance with subsequent hardware qualification and documentation. Support arm system with L-tube for wall mounting, rotates up to 350 degrees. Support arm system with U-tube for wall mounting, pivots and rotates up to 350 degrees. Support arm system with 2-point-fixation for wall mounting, rotates up to 350 degrees. Support arm system for ceiling mounting, as single or duplex system, rotates up to 350 degrees. Duplex system horizontal for the simultaneous use of two WAVE or PILOT, rotating and tilting. Duplex system vertical for the simultaneous use of two WAVE or PILOT, up to 350 degree rotation. Direct wall mounting with mount for WAVE or PILOT and keyboard (120 degree tilting torque hinge). Pedestal / table mounting with mount for WAVE or PILOT available for table mounting with stainless steel tabletop, rotates up to 350 degrees. Rear view Mounting system, all supply lines routed in protective stainless steel tube

25 APPLICATION OF MOUNTING SYSTEMS 48 49

26 MOUNTING SYSTEMS EQUIPMENT HIGH-QUALITY STAINLESS STEEL COMPONENTS FOR THE REALISATION OF CUSTOMER-SPECIFIC SOLUTIONS TECHNICAL DATA EQUIPMENT EQUIPMENT Optimal for GMP conditions and cleanrooms Customer-specific modifications and constructions possible Professional consulting also on-site The wide range of high-quality mounting and configuration equipment guarantees a perfect integration of GMP-IT hardware into the production environment. We offer a wide range of different options and possibilities to configure our devices. From cable manager to scanner holder and webcam - we would be pleased to supply all the extra functional equipment you require for your TROLLEY or HMI system. RFID READER WLAN ADAPTER BLUETOOTH Frequency (transmission protocol): 13,56MHz (ISO14443A/B, ISO 15693, NFC), 125/134,2kHz Transponder: MIFARE, LEGIC, NTAG2XX -- WLAN standards: IEEE802.11ac/a/b/g/n -- WLAN security: WEP with 64/128 Bit WPA(2)-PSK Up to 600 Mbit/s (up to 433 Mbit/s on 5GHz or up to 150 Mbit/s on 2,4GHz) with the latest ac standard External high-gain antenna for even better WLAN reception despite stainless steel casing -- Certification: CE, FCC -- Bluetoothstandard: edr Transmission rate: up to 3 Mbit/s Range: up to 100 m With Bluetooth low energy support Cable manager TROLLEY MAXI WLAN-Antenna Scanner Cradle Holder with Box Scanner holder Cable manager HMI system WAVE Speaker, webcam & microphone Touch pen with stainless steel holder Handle RFID reader FAR/ES COMPACT RFID interface 50 51

27 EX-PROTECTED SYSTEMS VISUNET THE EX-PROTECTED VISUNET IS SETTING NEW STANDARDS TECHNICAL DATA VISUNET VISUNET 21.5" EX1 - new 19" and 22" EX2 GMP EX1 with capacitive multi-touch display Low heat generation Windows based Industrial Monitor, VGA and DVI control, LWL (optional) Remote monitors with network distances of up to 2 km Duplex system solutions in vertical and horizontal arrangement for EX zone 2 Ruggedly constructed, wireless architecture Easy to clean stainless steel casing Rated IP66 For use in hazardous areas we recommend the VisuNet EX1 (e. g. VisuNet GXP RM) and VisuNet EX2 (e. g. VisuNet EX2 GMP PC or VisuNet EX2 GMP RM) systems from Pepperl + Fuchs, which are able to meet the most demanding requirements. The ex-protected VisuNet PC offers the optimal solution for decentralized displaying and working with information right where the process is happening. Other selected OEM products upon request. EXAMPLE CONFIGURATION VISUNET GXP RM + KEYBOARD MODEL VISUNET EX1 GXP RM VISUNET EX2 GMP PC VISUNET EX2 GMP RM Variants Remote monitor designed for operation in explosion-hazard areas as per zone 1+21 Panel-PC designed for use in hazardous areas classified as zones 2+22 Remote-Monitor designed for use in hazardous areas classified as zones 2+22 and under GMP conditions DISPLAYS AND CONTROLS VISUNET EX1 GXP RM VISUNET EX2 GMP PC VISUNET EX2 GMP RM Display 21.5" 19" / 22" TFT displays Resolution 1920 x x 1024 / 1680 x 1050 Touchscreen Capacitive Resistive Stainless steel keyboard (optional) Membrane keyboard, imprints with ergonometric finger guidance and antibacterial surface, with touchpad or trackball CONFIGURATIONS VISUNET EX1 GXP RM VISUNET EX2 GMP PC VISUNET EX2 GMP RM Industrial PC -- Intel Atom 1.46 GHz Dual Core E3826 Intel Atom 1.46 GHz Dual Core E3826 Operating system P+F RM Shell 4.0 Firmware (Win Embedded Standard 7 based) Windows 7 Ultimate System memory -- 4 GB 4 GB Storage capacity GB SSD 32 GB CF I/O Interfaces Exe: 1x Fast Ethernet 1x USB 1x RS232/422 1x RS485 Exi: 2x USB (Keyboard, mouse) 1x TTY (barcode reader), optional 1x LWL Ethernet, optional 2x Ethernet 1x USB ex na 2x RS232 ex na 3x USB ex ic 1x TTY ex ic (optional) P+F RM Shell 4 Standard (Win 7 based, RDP8, VNC) 2x Ethernet 1x USB ex na 2x RS232 ex na 3x USB ex ic 1x TTY ex ic (optional) PHYSICAL CHARACTERISTICS VISUNET EX1 GXP RM VISUNET EX2 GMP PC VISUNET EX2 GMP RM Power supply 24 V DC / max. 80 W or V AC Dimensions (approx. mm) W 618 / H 452 / D 120 (Panel with stainless steel frame, 24 V DC power supply) 24 V / max. 100 W 19 : W 568 / H 450 / D : W 625 / H 450 / D 73 Weight Approx. 23 kg (Panel) Approx. 14 kg (Panel) Casing and surface Stainless steel, type 304, brushed Certification ATEX, IECEx CE (other certifications on request) IP Rating IP

28 MOBILE PC SYSTEMS TABLETS MOBILE COMPUTING IN THE PROCESS INDUSTRY TABLETS Customer-specific configuration Rugged, sealed enclosure Intelligent mobile computing with rugged, portable Tablet-PC systems. Powerful technologies with ergonomic design for a mobile environment - indoors and outdoors. Ruggedly constructed display Tested under real-world conditions Wireless connectivity Wi-Fi, 3G and Bluetooth Long battery life Extensive expansion options such as: Docking Station, Digital- / Web camera, RFID Reader, Barcode Scanner, Smart Card Reader Data access from any location: in cleanrooms, production areas, warehouse logistics, or while on the road. EXAMPLE CONFIGURATION STAINLESS STEEL TABLET 54 55

29 MOBILE PC SYSTEMS TECHNICAL DATA TABLETS MODEL STAINLESS STEEL TABLET MOTION C5M POKINI TAB A10 PANASONIC FZ-G1 Manufacturer Possible with different models and manufacturers, e.g. Lenovo / Apple. Motion Pokini Panasonic Product description Tablet in stainless steel casing Mobile PC System, Tablet-PC Mobile PC System, Tablet-PC Mobile PC System, Tablet-PC DISPLAYS AND CONTROLS STAINLESS STEEL TABLET MOTION C5M POKINI TAB A10 PANASONIC FZ-G1 Display 10.1", other sizes upon request 10.4" 10.1" 10.1" Resolution Depending on the integrated device 1024 x 768 XGA with LED backlight Operation Capazitive 10-finger multi-touch with Corning Gorilla Glass 1920 x 1200 WUXGA -Activematrix-(TFT)-LCD Capazitive 10-finger multi-touch with Corning Gorilla Glass 1920 x 1200 WUXGA-Activematrix-(TFT)-LCD Capazitive 10-finger multi-touch and digitizer CONFIGURATIONS STAINLESS STEEL TABLET MOTION C5M POKINI TAB A10 PANASONIC FZ-G1 CPU Depending on the integrated device Intel Core i5-5200u up to 2.7 GHz Intel Atom BayTrail Z Core processor 1,86 GHz Intel Core i5-4310u vpro 2.0 GHz Tablet in stainless steel casing Motion C5m Operating system Windows 7 Professional (64-bit) or Windows 8.1 Pro Windows 8.1 Pro or Android System memory 4 GB RAM (max. 16 GB) 4 GB DDR3 4 GB DDR3 Storage capacity 64 GB SSD (max. 256 GB SSD), 256 GB SED optional 128 GB flash memory 128 GB SSD I/O Interfaces Docking connection, USB 3.0 USB 2.0, Micro USB, Audio, Docking Station with 3x USB 3.0, LAN (optional) Expansions 8 megapixel camera, RFID reader, fingerprint, barcode reader (optional) 8 megapixel camera with flash, 2D barcode reader via camera, MicroSD, other options on request Windows 8.1 Pro or Windows 7 Professional USB 3.0, LAN (optional), Serial (9-Pin), HDMI, headset, Port connector Communication WLAN, Bluetooth, 4G/LTE (optional) WLAN, Bluetooth, 3G/LTE (optional) WLAN, Bluetooth 5 megapixel camera, 2D barcode reader, MicroSD, other options on request PHYSICAL CHARACTERISTICS STAINLESS STEEL TABLET MOTION C5M POKINI TAB A10 PANASONIC FZ-G1 Power supply Depending on the integrated device V AC external power supply, standard Li-ion battery Dimensions (approx. mm) W 285 / H 210 / D 30, may vary depending on the display size V AC external power supply, Li-ion battery with 8-10 hours of operation V AC external power supply, Li-ion battery 10.8V 4400 mah W 256 / H 256 / D 24.3 W 269 / H 181 / D 12.5 W 270 / H 188 / D 19 Weight Approx. 1,5 kg Approx. 1,5 kg Approx. 0,8 kg Approx. 1,3 kg Casing Stainless steel, type 304 Plastic Plastic Plastic IP Rating IP65 IP54 IP65 IP65 These pages only show a small selection of our extensive product range. We are pleased to assist you in the selection and configuration of your specific Tablet-PC system. Tablet Pokini Tab A10 Panasonic FZ-G

30 ADDITIONS SCANNER BOX RUGGEDLY CONSTRUCTED & FLEXIBLE FOR PRODUCTIVE USE IN CLEANROOMS SCANNER BOX Optimal for GMP conditions and cleanrooms Various integration possibilities SCANNER BOX for cleanroom compatible integration of multiple scanner charging stations Completely preassembled Easy to clean stainless steel casing Rated IP65 The Systec & Solutions SCANNER BOX: The charging and base stations of barcode scanners are not generally suitable for cleanroom use. Systec & Solutions has therefore developed an easy-to-clean box optimized for cleanroom applications: the stainless steel SCANNER BOX. This was designed to be in accordance with the IP65 rating, offers space and protection for up to four scanners or two multi charging stations, ensuring reliable, convenient cleanroom operation. The door of the SCANNER BOX is provided with a viewing window. Inside there is a compression latch and an additional partition for integration of the power supply units with an opening for cable entry. The back wall is screwed on and can be detached for service purposes. The SCANNER BOX can optionally be supplied with and without charging stations and power supply units. Physical features: Dimensions (approx. mm): W 470 / H 260 / D 265 Space inside (approx. mm): W 429 / H 228 / D 170 Weight: approx. 22 kg (without configurations) SCANNER BOX opened up SCANNER BOX closed Scanner systems: You can find a selection of 1D and 2D scanners for reliable, high-performance recording of data under special operating conditions on the following pages. EXAMPLE CONFIGURATION SCANNER BOX WITH CHARGING STATIONS AND SCANNER 58 59

31 ADDITIONS TECHNICAL DATA SCANNER MODEL POWERSCAN PM9500 / PBT9500 POWERSCAN PD9530 ZEBRA DS3678 ZEBRA DS3608 Manufacturer Datalogic Datalogic Zebra Zebra Product description Wireless 1D- / 2D-Imager; wireless Bluetooth Imager Wired 1D- / 2D-Imager Wireless Bluetooth Imager Wired 1D- / 2D-Imager READING TECHNOLOGY POWERSCAN PM9500 / PBT9500 POWERSCAN PD9530 ZEBRA DS3678 ZEBRA DS3608 Reading options 1D- / 2D-Imager 1D- / 2D-Imager 1D- / 2D-Imager 1D- / 2D-Imager Operating range 2 up to 85 cm, Green Light LED System to read confirmation (3GL) 6 up tp 85 cm (depending on barcode type and density), Green Light LED System to read confirmation (3GL) 3,3 up to 152 cm (depending on barcode type and density), LED and vibration as a user display 3,3 up to 152 cm (depending on barcode type and density), LED and vibration as a user display SCAN TECHNOLOGY POWERSCAN PM9500 / PBT9500 POWERSCAN PD9530 ZEBRA DS3678 ZEBRA DS3608 Communications 433,92 MHz, Bluetooth Bluetooth PHYSICAL CHARACTERISTICS POWERSCAN PM9500 / PBT9500 POWERSCAN PD9530 ZEBRA DS3678 ZEBRA DS3608 Power supply Scanner: 10 V, 2150 mah, Li-ion battery Station: 10 bis 30 V DC Dimensions (approx. mm) Scanner: W 74 / H 212 / D 110 Station: W 240 / H 108 / D 95 Weight IP Rating Scanner: 380 g Station: 380 g IP65 (without display) IP64 (with display) Scanner: USB Scanner: 3100 mah Station: 4,5 up to 12,6V DC Scanner: USB W 74 / H 212 / D 110 Scanner: W 76 / H 185 / D 132 Scanner: W 76 / H 185 / D g Scanner: 407 g Station: 410 g IP65 IP67 IP g PowerScan PM9500 / PBT9500 PowerScan PD9530 These pages only show a small selection of our extensive product range. All scanner systems are also available as DPM (Direct Part Marking) version. We are pleased to assist you in the selection and configuration of your specific Scanner System. Please contact us so we can inform you about the latest innovations and offers. Zebra DS3678 Zebra DS

32 ADDITIONS PRINTER BOX STAINLESS STEEL VERSION FOR EASY CLEANING AND SIMPLE INTEGRATION PRINTER BOX Optimal for GMP conditions and cleanrooms Various integration possibilities Printer door for easy label removal Completely preassembled Easy to clean stainless steel casing Rated IP65 The Systec & Solutions PRINTER BOX: Label printers are generally not suitable for use in cleanrooms. Systec & Solutions has therefore developed an easy-to-clean box, optimized for cleanroom applications: the stainless steel PRINTER BOX. This was designed to be in accordance with the IP65 rating, offers space and protection, ensuring reliable, convenient cleanroom operation. The door of the PRINTER BOX for access to the label printer has an additional door for quick access to the printed label as well as a toggle closure. Inside there is a flat-surfaced platform which can be pulled out on a telescopic rail system and a multiple-socket outlet for connection of the printer. A versatile plate on the back for power, USB, RS232 or Ethernet makes the PRINTER BOX suitable for a variety of applications. Physical features: Option 1: Dimensions (approx. mm): W 400 / H 400 / D 600 Space inside (approx. mm): W 347 / H 279 / D 585 Weight: approx. 28 kg (without configurations) Option 2: Dimensions (approx. mm): W 450 / H 540 / D 600 Space inside (approx. mm): W 377 / H 346 / D 585 Weight: approx. 41,5 kg (without configurations) Printer systems: You can find a selection of high-performance label printers for thermal transfer and/or direct thermal printing designed for a long service life in production environments on the following pages. PRINTER BOX, installation variant PRINTER BOX, installation variant, opened up PRINTER BOX, installation variant, with telescopic rail system EXAMPLE CONFIGURATION PRINTER BOX 62 63

33 ADDITIONS TECHNICAL DATA PRINTER MODEL ZEBRA GX430 ZEBRA ZT220 ZEBRA ZT410 CAB XC6 Manufacturer Zebra Zebra Zebra CAB Product description Label printer Label printer Label printer Color Label printer PRINT TECHNOLOGY ZEBRA GX430 ZEBRA ZT220 ZEBRA ZT410 CAB XC6 Print method Thermal direct / thermal transfer Thermal direct / thermal transfer Thermal direct / thermal transfer Print resolution 203 / 300 dpi 203 / 300 dpi 203 / 300 / 600 dpi 300 dpi Color thermal transfer Print speed 152 mm per second (203 dpi) 152 mm per second 356 mm per second (203 dpi) Up to 125 mm per second Print width Max. 102 mm Max. 104 mm Max. 104 mm Max mm MEDIA SPECIFICATIONS ZEBRA GX430 ZEBRA ZT220 ZEBRA ZT410 CAB XC6 Media width 19 to 108 mm Max. 114 mm Max. 110 mm 55 to 165 mm Media length not endless: 991 mm not endless: 991 mm Up to 3988 mm 1500 mm Media thickness 0.08 to mm to 0.25 mm to 0.25 mm 0.05 to 0.8 mm Roll diameter Max. 127 mm Max. 203 mm Max. 203 mm Max. 300 mm Core diameter 12.7 mm 76 mm 76 mm 76 mm CONFIGURATIONS ZEBRA GX430 ZEBRA ZT220 ZEBRA ZT410 CAB XC6 Zebra GX430 Zebra ZT220 System memory 8 MB SDRAM 4 MB Flash 128 MB RAM 128 MB Flash 256 MB RAM 512 MB Flash 64 MB RAM 8 MB Flash CF Flash I/O Interfaces RS-232, USB 1.1, Internes Ethernet 10/100 Mbps, b/g WLAN (optional), Bluetooth (optional) RS-232, USB 2.0, 10/100 Print Server (optional) RS-232, USB 2.0, Parallel Port, Wireless Print Server, 10/100 Print Server (optional) USB 2.0 Slave and Master, Ethernet, WLAN (optional) PHYSICAL CHARACTERISTICS ZEBRA GX430 ZEBRA ZT220 ZEBRA ZT410 CAB XC6 Power supply V AC V AC V AC V AC Dimensions (approx. mm) W 171 / H 152 / D 210 W 239 / H 280 / D 432 W 269 / H 324 / D 495 W 358 / H 395 / D 554 Weight 1.4 kg 7.8 kg 16 kg 24 kg Casing Double wall plastic Robust metal construction Robust metal construction Diecast aluminum casing, metal cover with large inspection glass These pages only show a small selection of our extensive product range. We are pleased to assist you in the selection and configuration of your specific Printer system. Please contact us so we can inform you about the latest innovations and offers. Zebra ZT410 CAB XC

34 SYSTEC & SOLUTIONS SERVICES OUR SERVICES FAST, CUSTOMIZED AND COMPETENT All from a single supplier We can supply all of the necessary hardware products and services: Project planning and management Detailed Specifications Configuration / scheduling of hardware On-site installation and integration service, Installation of the complete system System functionality test Implementing Qualification service / documentation Together with you, we consult, plan, develop, and implement the system of your choice a full service approach that our customers appreciate. Technical customer service You want to upgrade, retrofit, or maybe a device failed after the warranty period. We make sure you re covered! The moment your inquiry is received by our ticket system, time runs, because every hour of breakdown is often more expensive than the cost of repair or replacement. Contact us: Telephone: Hardware support inquiries: support@systec-solutions.com Repair service at a reasonable fixed price. On-site help: Our service team is available. Customer specific products and solutions Our products are scalable and can be individually configured according to the customer s wishes. Customer specific product configurations and special designs are already possible with small scales. 66