IMBA-G412ISA Quick Installation Guide

Transcription

1 ATX Motherboard supports LGA775 Intel Core 2 Dual/Quad CPU with 1333/1066/800MHz FSB, DDR3, Dual PCIe GbE, ISA, PCI, PCIe x16, 6COM, LPT, SATA II, IDE, USB 2.0, Audio and RoHs IMBA-G412ISA Quick Installation Guide Version 2.0 Jan. 17, 2012 Package Contents IMBA-G412ISA package includes the following items: 1 x IMBA-G412ISA-R20 Single Board Computer 1 x Dual Ports RS-232 cable with Bracket 4 x SATA cable 1 x I/O Shielding 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG (Quick Installation Guide) 1 x One Key recovery CD 2012 Copyright by IEI Technology corp. All rights reserved. 1

2 Specifications CPU: LGA775 45nm Intel Core 2 Quad, Core 2 Duo, Pentium D, Celeron at FSB 800/1066/1333MHz processors System Chipset: Intel G41+ ICH7 BIOS: AMI System Memory: Two 240-pin 800/1066MHz Dual-Channel DDR3 SDRAM DIMM slot supported (System max. 8GB) Ethernet: Dual Realtek RTL8111E PCIe GbE Controllers, LAN1 with ASF2.0 support I/O Interface: 5 x RS x RS-232/RS-422/RS-485 with Auto Flow control 8 x USB2.0 4 x SATA II 1 x IDE 1 x LPT 1 x KB/MS 1 x CF Type II Infrared interface: 1 x 5-pin header Expansion: 1 x PCIe x16 Slot, with external power connector 4 x PCI Slot 1 x ISA Slot 1 x PCI/ISA Slot Super I/O: Fintek F81865 ISA Bridge: ITE IT8888 Digital I/O: 8-bit Digital I/O ( 4-bit input / 4-bit output) Graphic Engine: Intel GMA X4500 Display: Analog CRT up to 2048x1536@75MHz,Support CRT Hot plug Audio: Realtek ALC888 HD Audio codec; Analog Front Audio supported by Realtek ALC888; TPM: 2 x 10-pin header SMBUS: 1 x 4-pin wafer Watchdog Timer: 2

3 Software programmable supports 1~255sec system reset. FAN connector: 1 x 4 pin CPU fan connector, with smart FAN 1 x 3 pin NB fan connector, 2 x 3 pin system fan connector Power supply: ATX power supply, with CPU power connector Power Consumption: 12V@2.01A, -12V@0.05A, 3.3V@0.15A, 5V@5.06A (Intel Core Duo CPU E7400@2.8GHz with 1GB DDR3 memory) Operating Temperature: -10 ~ 60 C Operating Humidity: 5%~95% non-condensing Dimension: 305mm x 244mm Weight: GW:1200g, NW:650g Ordering Information IMBA-G412ISA-R20: ATX Motherboard supports LGA775 Intel Core 2 Dual/Quad CPU with 1333/1066/800MHz FSB, DDR3, Dual PCIe GbE, ISA, PCI, PCIe x16, 6COM, LPT, SATAII, IDE, USB 2.0, Audio, RoHS RS: SATA Power Cable RS:IDE cable CB-USB02-RS: Dual Ports USB Cable with bracket CF-775A-RS: CPU Cooler for 130W CF-520-RS-R11: CPU Cooler for 115W CF-775B-RS: 1U CPU cooler for 90W SDVO-100VGA-R10: PCIex16 VGA output SDVO Card support dual display (IEI board only) SDVO-100DVI-R10: PCIex16 DVI output SDVO Card support dual display (IEI board only) TPM-IN01-R11:Infineon 20 pin trusted platform module with S/W management tool, Firmware V3.17 3

4 Jumpers setting and Connectors LABEL FUNCTION JP1 CMOS state setting jumper JP2 Compact Flash Card Master/Slave Select JP4 RS-232/422/485 Select JAUTO1/2 AT/ATX Power Select USBPW12 USBP34 USB PWR Select J_CF1 CF Voltage Choice 3IN1_DSUB1B 3 in 1 D-Sub-RS-232 COM Port COM3~6 RS-232 Pin Header COM2 RS-232/422/485 Pin Header F_PANEL1 PWR RST Buttons Indicators and Speaker 3IN1_DSUB1C 3 in 1 D-Sub-VGA Connector DIO1 Digital I/O Connector FP_AUDIO1 Front Audio Connector LAN1/USB1 LAN2/USB2 External LAN And USB Connectors CPU12V1 ATX-12V CPU Power Source Connector IR1 Infrared Interface Connector CPU_FAN1 Smart Fan Connectors for CPU NB_FAN1 System Fan Connector PCN1 PCIe Power Source Connector SMBUS1 SMBUS Connector SYS_FAN1/2 System Fan Connector BAT1 Coin Battery holder USB3/USB4 USB 2x4 Pin Pin-header TPM1 TPM Connector SATA1/2/3/4 Serial ATA Connectors PWR2 ATX POWER Connector 3IN1_DSUB1A 3 in 1 D-Sub-LPT connectors KBMS2 PS/2 KB/MS Connector JSPI1 SPI Connector AUDIO1 External Audio Connector IDE1 IDE Connector CF1 CF Type II Slot 4

5 JP1 : Clear CMOS Setup 1-2 Keep CMOS Setup (default) (Normal Operation) Short 2-3 Clear CMOS Setup JP2 : Compact Flash Card Master/Slave Open Slave Short Master(Default) JP4: RS-232/422/485 Select RS-232 Short 1-2 RS-422 Short 3-4 RS-485 Short 5-6 JAUTO1/2: AT/ATX Power Select Open ATX Mode Short AT Mode USBPW12/USBP34:USB Power Select PIN DESCRIPTION V VSB J_CF1: CF Voltage +VCC_CF Choice V V 5

6 3IN1_DSUB1B : COM1(RS232) 1 NDCD 6 NDSR 2 NRX 7 NRTS 3 NTX 8 NCTS 4 NDTR 9 NRI 5 GND COM3~COM6:RS-232 Pin Header 1 NRLSD 2 NDSR 3 NRX 4 NRTS 5 NTX 6 NCTS 7 NDTR 8 NRI 9 GND 10 NC COM2(RS-232/422/485):RS-232/422/485 Pin Header 1 NDCD 2 NDSR 3 NRX 4 NRTS 5 NTX 6 NCTS 7 NDTR 8 NRI 9 GND 10 NC 11 TX+ 12 TX- 13 RX- 14 RX- F_PANEL1 : PWR RST Buttons Indicators and Speaker Power LED PWRBTN HDDLED 1 Power LED 2 Beep Power 3 NC 4 NC 5 GND 6 NC 7 PWRBTSW# 8 PC Beep 9 GND 10 NC 11 HDDLED 12 EXTRST# 13 HDDLED# 14 GND Speaker RESET 6

7 3IN1_DSUB1C: 3 in 1 D-Sub VGA Connector 1 Red 9 VGAVCC 2 Green 10 GND 3 Blue 11 NC 4 CRT_PLUG# 12 DDCDAT 5 GND 13 HSYNC 6 GND 14 VSYNC 7 GND 15 DDCCLK 8 GND DIO1 : 8Bit Digital Input / Output Connector 1 GND 2 VCC5S 3 GPO0 4 GPO1 5 GPO2 6 GPO3 7 GPI0 8 GPI1 9 GPI2 10 GPI3 FP_AUDIO1: HD Audio Digital Pin Header 1 MIC_L 2 Audio GND 3 MIC_R 4 FP_AUO DETECT 5 LINE_R 6 PD 7 F_SENSE 8 NC 9 LINE_L 10 PD CPU12V1 : CPU POWER Source Connector 1 GND 2 GND 3 +12V 4 +12V 7

8 IR1 : IR Connector 1 +5V 2 NC 3 IR_RX 4 GND 5 IR_TX CPU_FAN1: CPU FAN,1X4PIN HEADER,P= GND 2 +12V 3 FANIN1 4 FANCTL1 NB_FAN1: SYSTEM FAN, 1X3 PIN HEADER,P= FANIN V 3 GND PCN1:PCIe Power Source Connector 1 VCC +5V 2 GND 3 GND 4 VCC +12V SYS_FAN1/2: System Fan CONN 1X3 PIN PINHEADER,P= NC 2 +12V 3 GND SMBUS1:SMBUS Connector 1 GND 2 SMBDATA 3 SMBCLK 4 VCC BAT1 : Coin battery holder 1 BAT+ 2 BAT-(GND) USB3/USB4: 2x4 Pin Header 1 +5V 2 GND 3 USBP4/6# 4 USBP5/7 5 USBP4/6 6 USBP5/7# 7 GND 8 +5V 8

9 TPM1: TPM Connector 1 TPMCLK 2 GND 3 LFRAME- 4 NC 5 PCIRST4-6 +5V 7 LAD3 8 LAD2 9 LAD0 10 LAD1 11 GND 12 GND 13 SMBCLK_MAIN 14 SMBDATA_MAIN V 16 SERIRQ 17 GND 18 CLKRUN V 20 LDRQ0- SATA1/2/3/4:SATA Connector 1 GND 2 SATATXP 3 SATAXN 4 GND 5 SATARXN 6 SATARXP 7 GND LAN1/USB1A,LAN2/USB2A: RJ45 Connector P1 3,3V P8 LAN1/2_MDI3+ P2 LAN1/2_MDI0+ P9 LAN1/2_MDI3- P3 LAN1/2_MDI0- P10 GND P4 LAN1/2_MDI1+ P11 LAN1/2_LINK100 P5 LAN1/2_MDI1- P12 LAN1/2_LINK1000 P6 LAN1/2_MDI2+ P13 LAN1/2_LED0 P7 LAN1/2_MDI2- P14 3.3V LAN1/USB1B,LAN2/USB2B: USB Port 1 USBPWR1 2 USBP0/2-3 USBP0/2+ 4 GND 5 USBPWR1 6 USBP1/3-7 USBP1/3+ 8 GND 9

10 PWR2: ATX POWER Connector V V V 14-12V 3 GND 15 GND 4 +5V 16 PS_ON- 5 GND 17 GND 6 +5V 18 GND 7 GND 19 GND 8 NC 20 NC 9 +5V 21 +5V V 22 +5V V 23 +5V V 24 GND 3IN1_DSUB1A: LPT Connector 1 RSTB- 2 RPDR0 3 RPDR1 4 RPDR2 5 RPDR3 6 RPDR4 7 RPDR5 8 RPDR6 9 RPDR7 10 RACK- 11 RBUSY 12 RPE 13 RSLCT 14 RAFD- 15 ERR- 16 RINIY_P- 17 RSLIN- 18 GND 19 GND 20 GND 21 GND 22 GND 23 GND 24 GND 25 GND 26 GND KBMS2: KB/MS Connector 1 KB_DATA 2 NC 3 GND 4 KBPWR 5 KB_CLK 6 NC 7 MS_DATA 8 NC 9 GND 10 KBPWR 11 MS_CLK 12 NC 13 KB_GND 14 KB_GND 10

11 JSPI1: SPI Connector. PIN HEADER2*4,8PIN, P:2.54MM 1 SPI_VCC 2 GND 3 SPI_CS 4 SPI_CLK 5 SPI_SO 6 SPI_S1 7 NC 8 NC 11

12 Board Layout: Jumper and Connector Locations (Unit:MM) 12