Evaluates: MAXQ1061. MAXQ1061 Evaluation Kit. General Description. Benefits and Features. MAXQ1061 EV Kit Contents. MAXQ1061 EV Kit Photo
|
|
|
- Myron Francis
- 6 years ago
- Views:
Transcription
1 MAXQ1061 Evaluation Kit General Description This EV kit provides a platform for evaluating the capabilities of the MAXQ1061 cryptographic controller with TLS/ DLS support that is targeted for strengthening security in embedded systems. This credit card-sized socketed board allows for communication and power through a 10-pin connector to an optional Aardvark I2C/SPI host adapter. Header pins are provided for communication to a generic host processor through SPI or I2C and allows it to be sourced by an external 3.3V power supply. This evaluation kit provides a robust platform for developing and debugging applications targeted for the MAXQ1061. Ordering Information appears at end of data sheet. MAXQ1061 EV Kit Photo ; Rev 0; 11/16 Benefits and Features 10-Pin Header to Connect to an Optional Aardvark Host Adapter or Generic Host Processor Board Powered by an Aardvark Host Adapter, Host Processor Board or an External Supply to Test Loops Toggle Switches for TLS/AES-SPI Mode and Remote/Local Mode Selection Multicolor LED Indicating Mode Selection MAXQ1061 EV Kit Contents MAXQ1061 EV kit containing a MAXQ1061
2 Quick Start Note: Not applicable. Detailed Description of Hardware (or Software) This evaluation kit should be used with the following documents: MAXQ1061 data sheet MAXQ1061 user s guide MAXQ1061 EV kit data sheet (this document) MAXQ1061 EV kit software user s guide These documents, or links to them, are included on the MAXQ1061 EV kit package. For the latest versions of the documents listed above, use the following link: www. maximintegrated.com/maxq1061. EV Kit Package This package contains useful documentation and links that serve as a guide for evaluation and development. The package includes examples and host library written in C. For further information, refer to MAXQ1061 EV Kit User s Guide. Power Supply The MAXQ1061 EV kit can be powered two ways. The first is by 5V, supplied from an optional Aardvark host adapter or generic host processor board that sources an onboard regulator that regulates it down to 3.3V. The second is from an external 3.3V power supply connected to two test loop connectors J2 (EXT 3V3) and J3 (GND). Current Monitoring Jumper JP6 (DUT VDD EN) provides a convenient current monitoring point for VDD. Communication to Host A (2x5) 0.1 spaced shrouded header (J1) allows for SPI or I2C communication through an optional Aardvark host adapter. A generic host processor can also utilize this connector or headers TP1 and TP2. Jumper JP4 (COMM SEL) allows the user to select between SPI or I2C communication. Slide Switches There are two slide switches. A SPDT (SW3) allows for control of the MODE pin for AES-SPI and TLS modes. The second switch, a DPDT (SW4) allows for local or remote (external host) control of the HOST pin. Pushbutton Switches Pushbuttons (normally open) SW1 and SW2 can be used to generate a logic 0 signal on their corresponding pins. Pushbutton SW1 provides a global POR reset function for the MAXQ1061 by asserting the RST# input. Pushbutton SW2 brings back the MAX1061 from standby after a SLEEP command has been issued by asserting the WAKEUP# input. Indicator LEDs Bicolor LED (DS1) illuminates red for TLS mode and green for AES-SPI mode. GPIO Headers Two (1x7) 0.1 spaced headers (TP1 and TP2) allow access to all of the MAXQ1061 signal pins. Maxim Integrated 2
3 Jumper Function and Default Settings HEADER SIGNAL SETTINGS DESCIPTION 1-2 Connects Host Port pin 1 to WAKEUP_N JP1 SCL/GPIO_0 *3-4 Connects Host Port pin 1 to RESET_N 5-6 Connects Host Port pin 1 to SCL/WDI 1-2 Connects Host Port pin 1 to WAKEUP_N JP2 SDA/GPIO_1 *3-4 Connects Host Port pin 1 to REMOTE MODE 5-6 Connects Host Port pin 1 to SDA/RESET_OUT_N JP3 3V3 2-1 Connects EXT 3V3 to source board power *2-3 Connects 3V3 LDO to source board power JP4 CMS 2-1 Connects I 2 C to CMS input of the MAXQ1061 *2-3 Connects SPI to CMS input of the MAXQ1061 JP5 TAMPER_N Open Enables TAMPER_N of the MAXQ1061 *Close Disables TAMPER_N of the MAXQ1061 JP6 VDD Open Disconnects VDD of the MAXQ1061 from 3V3 *Close Connects VDD of the MAXQ1061 to 3V3 JP7 MODE Open Disconnects MODE of the MAXQ1061 from SW4 (REMOTE/LOCAL switch) *Close Connects MODE of the MAXQ1061 to SW4 (REMOTE/LOCAL switch) JP8 SDA *Open Disconnects SDA of the MAXQ1061 from a 10K pull up resistor (solder bridge) Close Connects SDA of the MAXQ1061 to a 10K pull up resistor (solder bridge) JP9 SCL *Open Disconnects SCL of the MAXQ1061 from a 10K pull up resistor (solder bridge) Close Connects SCL of the MAXQ1061 to a 10K pull up resistor (solderbridge) *Default position. Maxim Integrated 3
4 MAXQ1061 Evaluation Kit Default Jumper Placement Ordering Information PART MAXQ1061-KIT# TYPE EV Kit #Denotes RoHS compliant. Maxim Integrated 4
5 MAXQ1061 EV Kit Bill of Materials PART QTY DESCRIPTION MANUFACTURER PN BMP1,BMP2,BMP3,BMP4 4 BUMPON HEMISPHERE.44X.20 CLEAR SJ-5303 C1,C3,C5 3 CAP CER 1uF 16V 10% X7R 0603 GCM188R71C105KA64D C2 1 CAP CER 0.1uF 16V 10% X7R 0603 C0603C104K4RACTU C4 1 CAP CER 10uF 10V 10% X7R 0805 GRM21BR71A106KE51L D1 1 DIODE SCHOTTKY 30V 2A POWERDI123 DFLS230L-7 DS1 1 LED GREEN/RED CLEAR 1210 LTST-C155GEKT DS2 1 LED 565NM WTR CLR GREEN 1206 SMD SML-LX1206GC-TR J1 1 AARDVARK I2C SPI 10P HEADER J2 1 TEST POINT PC COMPACT.063"D RED 5005 J3,TP4,TP5 3 TEST POINT PC COMPACT.063"D BLK 5006 JP1,JP2 2 CONN HEADER.100 DUAL STR 6POS PEC03DAAN JP3,JP4 2 CONN HEADER.100 SINGL STR 3POS PEC03SAAN JP5,JP6,JP7 3 CONN HEADER.100 SINGL STR 2POS (2x1) PEC02SAAN JP8, JP9 2- DNI* SOLDER JUMPER NON PART PCB MAXQ1061 Breakout Board R1 1 RES 150 OHM 1/10W 1% 0603 SMD ERJ-3EKF1500V R2 1 RES 120 OHM 1/10W 1% 0603 SMD ERJ-3EKF1200V R3,R7,R8,R9 4 RES 10K OHM 1/10W 1% 0603 SMD ERJ-3EKF1002V R4 1 RES 100 OHM 1/10W 1% 0603 SMD ERJ-3EKF1000V R6 1 RES 332 OHM 1/10W 1% 0603 SMD ERJ-3EKF3320V SW1,SW2 2 SWITCH TACTILE SPST-NO 0.05A 24V B3S-1000 SW3 1 SWITCH SLIDE SPDT 0.2A R/A GULL CL-SB-12B-11 SW4 1 SWITCH SLIDE DPDT 0.2A GULL 12V CL-SB-22B-12T TP1 1 CONN HEADER.100 SINGL STR 1POS PEC01SAAN TP2, TP3 2 DNI* CONN HEADER.100 SINGL STR 7POS PEC07SAAN U1 1 REG LDO 3.3V/ADJ 16TSSOP-EP MAX8869EUE33+ XU1 1 MAXQ P SKT OTS-14(28) *Do Not Install Maxim Integrated 5
6 MAXQ1061 EV Kit Schematics Maxim Integrated 6
7 MAXQ1061 EV Kit Schematics (continued) Maxim Integrated 7
8 MAXQ1061 EV Kit Schematics (continued) Maxim Integrated 8
9 Revision History REVISION NUMBER REVISION DATE DESCRIPTION PAGES CHANGED 0 11/16 Initial release For pricing, delivery, and ordering information, please contact Maxim Direct at , or visit Maxim Integrated s website at. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc Maxim Integrated Products, Inc. 9
Evaluates: DS28E83 and DS2476. DS28E83 Evaluation System. Features. General Description. EV Kit Contents
Request Security User Guide and Developer Software DS8E83 Evaluation System General Description The DS8E83 evaluation system (EV system) provides the hardware and software necessary to exercise the features
MAXQ622 Evaluation Kit Evaluates: MAXQ622
General Description The MAXQ622 evaluation kit (EV kit) provides a proven platform for conveniently evaluating the capabilities of the MAXQ622 low-power, 16-bit, RISC microcontroller with USB interface
Evaluates: DS28E38 and DS2476. DS28E38 Evaluation System. Features. General Description. EV Kit Contents
Request Security User Guide and Developer Software DS28E38 Evaluation System General Description The DS28E38 evaluation system (EV system) provides the hardware and software necessary to exercise the features
S Complete 2:1 VGA Multiplexer S VGA Connections and Power S LED Indicators for Switch Connections S VGA Inputs/Outputs S Fully Assembled and Tested
19-5030; Rev 0; 10/09 MAX4885AE Evaluation Kit General Description The MAX4885AE evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX4885AE VGA 2:1 multiplexer.
Evaluates: DS28E50. DS28E50 Evaluation Kit. General Description. Quick Start. Benefits and Features. EV Kit Contents
Request Security User Guide and Full Developer Software Click here for production status of specific part numbers. DS28E50 Evaluation Kit General Description The DS28E50 evaluation system (EV system) provides
Evaluates: MAXQ617 Intended for IR Applications. MAXQ617 Evaluation Kit. Features and Benefits. General Description.
MXQ67 Evaluation Kit General Description This evaluation kit provides a platform for evaluating the capabilities of the MXQ67, 6-bit, RIS microcontrollers targeted for infrared applications. The motherboard
Evaluates: MAX14571 MAX MAX14571 Evaluation Kit. General Description. Features. MAX14571 EV Kit Photo
General Description The MAX14571 evaluation kit (EV kit) demonstrates the MAX14571 adjustable overvoltage and overcurrent protector in a 14-pin TSSOP surface-mount package with an exposed pad. The EV kit
Maxim Integrated Products 1
19-5229; Rev 0; 4/10 MAX14885E Evaluation Kit General Description The MAX14885E evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that utilizes the MAX14885E device to implement
Evaluate: MAX14589E/MAX14594E/ MAX MAX14589E/MAX14594E/ MAX14689 Evaluation Kits. Features and Benefits. General Description.
Evaluation Kits General Description The MAX14589E/MAX14594E/ evaluation kits (EV kits) are fully assembled and tested circuit boards that demonstrate the functionality of the MAX14589E, MAX14594E, and
Evaluates: MAX14130, MAX14131, MAX14930, MAX14931, MAX14932, MAX14934, MAX14935, MAX MAX1493X Evaluation Kit. General Description.
MAX9X Evaluation Kit Evaluates: MAX0, MAX, MAX90, MAX9, MAX9, MAX9, MAX9, MAX9 General Description The MAX9X evaluation kit (EV kit) demonstrates the functionality of the MAX9X -channel, unidirectional,
MAX14830 Evaluation Kit Evaluates: MAX14830
19-6127; Rev 1; 7/12 MAX14830 Evaluation Kit General Description The MAX14830 evaluation kit (EV kit) provides a proven design to evaluate the MAX14830 quad-channel universal asynchronous receiver-transmitter
S USB-PC Connection (Cable Not Included) S USB Powered (No External Power Supply Required) S Real-Time Data Acquisition Through the USB
19-5610; Rev 1; 8/11 MAXADClite Evaluation Kit General Description The MAXADClite evaluation kit (EV kit) evaluates the MAX11645, Maxim's smallest, very-low-power, 12-bit, 2-channel analog-to-digital converter
Quick Start. General Description. Features. Required Equipment. Procedure
General Description The MAX31875 evaluation kit (EV kit) demonstrates the MAX31875 ±2 C-accurate local temperature sensor with I2C/SMBus interface. The EV kit includes a graphical user interface (GUI)
Features. General Description. Component List
General Description The MAX5217 evaluation kit (EV kit) demonstrates the MAX5217, 16-bit, single-channel, low-power, buffered voltage-output DAC. The IC comes in an 8-pin µmax package. The EV kit provides
MAX17116Q Evaluation Kit Evaluates: MAX17116 in a 24-Pin TQFN Package
19-5846; Rev 0; 5/11 MAX17116Q Evaluation Kit General Description The MAX17116Q evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17116 dual-output DC/DC power
Evaluates: MAX MAX14970 Evaluation Kit. General Description. Quick Start (Application Circuit) Features. Table 1. Default Shunt Positions
General Description The MAX14970 evaluation kit (EV kit) provides a proven design to evaluate the MAX14970 dual-channel buffer. The EV kit contains four sections: an application circuit, characterization
S Application Circuit with SATA Input/Output S Eye Diagram Test Circuit with SMA Inputs/ Outputs
19-4953; Rev 0; 9/09 MAX4951AE Evaluation Kit General Description The MAX4951AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4951AE dual-channel buffer. The EV kit contains four
Evaluates: MAX32620, MAX77650, MAX MAX32620FTHR Rapid Development Platform. Benefits and Features. General Description
General Description The MAX32620FTHR board is a rapid development platform designed to help engineers quickly implement battery-optimized solutions with the MAX32620 Arm Cortex -M4 microcontroller with
MSP430AFE253 Development Board (CL-MSPDB-AFE) User Guide
MSP430AFE253 Development Board (CL-MSPDB-AFE) User Guide www.cascologix.com Page 1 Table of Contents 1 Revision History...3 2 Features...3 3 Board Features...4 3.1 Mini USB Connector...4 3.2 External Power
MAX5705A, MAX5705B, MAX5803, MAX5804, MAX5805A, MAX5805B
General Description The MAX5X05 evaluation kit (EV kit) demonstrates the MAX5705 and MAX5805 12-bit, single-channel, lowpower DACs with internal reference and buffered voltage output. The MAX5705 and the
S Proven PCB Layout S Fully Assembled and Tested. Maxim Integrated Products 1
19-5059; Rev 1; 4/10 General Description The MAX4951B evaluation kit (EV kit) provides a proven design to evaluate the MAX4951BE dual-channel redriver. The EV kit contains four sections: application circuit,
Features. General Description. Kit Contents. MAX32660 EV Kit Photo
MAX0 Evaluation Kit Evaluates: MAX0 General Description The MAX0 evaluation kit provides a compact development platform that provides access to all the features of the MAX0 in a tiny, easy to use board.
Maxim Integrated Products 1
19-4581; Rev 0; 4/09 MAX4989 Evaluation Kit General Description The MAX4989 evaluation kit (EV kit) provides a proven design to evaluate the MAX4989 Hi-Speed 2-of-4 USB 2.0 crosspoint switch. The EV kit
Evaluates: MAX MAX20326 Evaluation Kit. General Description. Quick Start. Features. EV Kit Contents. Required Equipment.
General Description The MAX20326 evaluation kit (EV kit) provides a convenient way to evaluate the MAX20326 dual precision bus accelerator IC. The EV kit breaks out the pins of the IC to test points enabling
S One SATA Host Connector S Two SATA Device Connectors
19-5166; Rev 0; 2/10 MAX4986 Evaluation Kit General Description The MAX4986 evaluation kit (EV kit) provides a proven design to evaluate the MAX4986 SAS/SATA 2:1/1:2 multiplexer/demultiplexer. The EV kit
MAX4951C Evaluation Kit Evaluates: MAX4951C
19-5944; Rev 0; 6/11 MAX4951C Evaluation Kit General Description The MAX4951C evaluation kit (EV kit) provides a proven design to evaluate the MAX4951C dual-channel buffer. The EV kit contains four sections:
MAX14972 Evaluation Kit Evaluates: MAX14972
19-6165; Rev 0; 12/11 MAX14972 Evaluation Kit General Description The MAX14972 evaluation kit (EV kit) provides a proven design to evaluate the MAX14972 dual SuperSpeed USB 3.0 equalizer/redriver utilizing
S Convenient USB Interface. S Single-Supply Operation through the USB S Option for External Power Supply for the Boost Regulator
19-5507; Rev 0; 9/10 MAX11835 Evaluation System General Description The MAX11835 evaluation system (EV system) demonstrates a complete solution to drive single and multilayer piezo actuators to create
+Denotes lead(pb)-free and RoHS compliant. 0.1µF ±10%, 50V X7R ceramic capacitor (0603) TDK C1608X7R1H104K C32 1 D2 1 H1 0 JUA JUE 0
19-4987; Rev 0; 9/09 General Description The MAX6948 evaluation kit (EV kit) provides a proven design to evaluate the MAX6948B 5-port, constantcurrent LED driver with PWM intensity control and integrated
MAX6651 Evaluation Kit/Evaluation System
19-1980; Rev 1; 5/07 MAX6651 Evaluation Kit/Evaluation System General Description The MAX6651 evaluation kit (EV kit) is an assembled and tested printed-circuit board (PCB) that demonstrates the MAX6651
S IEEE 802.3af/at-Compliant PSE Circuit. Maxim Integrated Products 1
19-5740; Rev 0; 1/11 MAX5971A Evaluation Kit General Description The MAX5971A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet single-port power-sourcing
MAX14579E Evaluation Kit Evaluates: MAX14579E/MAX14579AE
19-5995; Rev 0; 8/11 General Description The MAX14579E evaluation kit (EV kit) provides a proven design to evaluate the MAX14579E headset detection IC. The EV kit is designed to demonstrate the IC s headset
Evaluates: EV Kits Requiring SPI/ Parallel to USB Interface. INTF3000 Interface Board. General Description. Quick Start. Benefits and Features
INTF3000 Interface Board Evaluates: EV Kits Requiring SPI/ Parallel to USB Interface General Description The INTF3000 interface board is designed to facilitate the interfacing of Maxim s evaluation kit
Evaluates: MAX MAX31865PMB1 Peripheral Module. General Description. Features and Benefits. Peripheral Module Board Photo
General Description The MAX31865PMB1 peripheral module (Pmod ) provides the necessary hardware to interface the MAX31865 RTD-to-digital converter to any system that utilizes Pmodcompatible expansion ports
+Denotes lead-free and RoHS-compliant.
19-3107; Rev 0; 12/07 MAX1493 Evaluation Kit General Description The MAX1493 is a low-power, 4.5-digit analog-to-digital converter (ADC) with integrated liquid-crystal display (LCD) drivers. The MAX1493
MAXQ USB-to-JTAG EV Kit
19-5185; Rev 1; 11/10 MAXQ USB-to-JTAG Evaluation Kit General Description The MAXQM USB-to-JTAG evaluation kit (EV kit) is a preprogrammed interface board that acts as a USB-to-JTAG programming and debugging
Evaluates: MAX MAX20310 Evaluation Kit. Quick Start. General Description. Features. Detailed Description of Hardware. Required Equipment
General Description The MAX20310 evaluation kit (EV kit) is a fully assembled and tested circuit for evaluating the MAX20310 medical wearable, power-management solution with I2C capability for low-power
Maxim Integrated Products 1
19-1883; Rev 1; 2/07 MAX1799 Evaluation System/ General Description The MAX1799 evaluation system (EV system) consists of a MAX1799 evaluation kit (EV kit) and a companion Maxim CMAXQUSB board. The MAX1799
+Denotes lead-free and RoHS compliant. JU5, JU6, JU9 JU13 LED1, LED3 LED14
19-4303; Rev 0; 10/08 MAX6956 Evaluation Kit General Description The MAX6956 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that contains a MAX6956 IC. The MAX6956 is a 28-port
MAX15090/MAX15090A Evaluation Kits. Evaluate: MAX15090/MAX15090A. Features. General Description. Component List
General Description The MAX5090 evaluation kit (EV kit) provides a proven design to evaluate the MAX5090 hot-swap controller with an integrated 2A MOSFET. The MAX5090 EV kit is configured to pass 2A in
S On-Board Clock Generator Capable of 33MHz and 16.5MHz. S Accessible Headers to All 8 Input/Output (I/O) Channels
19-5067; Rev 0; 11/09 MAX13055E Evaluation Kit General Description The MAX13055E evaluation kit (EV kit) provides a proven design to evaluate the MAX13055E 8-channel, bidirectional level translator. The
Evaluates: MAX MAX14914 Peripheral Module. Features. General Description. Contents MAX14914PMB
General Description The MAX494 peripheral module provides the hardware to evaluate the MAX494 high-side/push-pull driver that operates as both an industrial digital output (DO) and an industrial digital
MAX5216PMB1 Peripheral Module
9-6; Rev 0; 5/ MAX56PMB Peripheral Module General Description The MAX56PMB peripheral module provides the necessary hardware to interface the MAX56 6-bit DAC to any system that utilizes PmodK-compatible
MAX15096/A/D Evaluation Kits. Evaluate: MAX15096/MAX15096A/MAX15096D. General Description. Features. Component List
General Description The MAX15096/A/D evaluation kit (EV kit) provides a proven design to evaluate the MAX15096 hot-swap controller with an integrated 6A MOSFET. The EV kit is configured to pass 6A in a
+Denotes lead-free and RoHS compliant.
19-4387; Rev 0; 11/08 MAX9675 Evaluation Kit General Description The MAX9675 evaluation kit (EV kit) provides a proven design to evaluate the MAX9675 nonblocking 16 x 16 video crosspoint switch with buffered
MAXQ7667 Evaluation Kit Evaluates: MAXQ7667
General Description The MAXQ7667 evaluation kit (EV kit) is a convenient platform to evaluate the capabilities of the MAXQ7667 ultrasonic distance-measuring microcontroller (FC). The EV kit contains all
V1BOOST-STEPPER Unipolar Stepper Motor BoosterPack for the MSP430 LaunchPad. User s Guide
V1BOOST-STEPPER Unipolar Stepper Motor BoosterPack for the MSP430 LaunchPad User s Guide Revised July 2012 CONTENTS 1 Introduction... 3 1.1 Overview... 3 1.2 Features... 3 1.3 Additional Information...
MAX31723PMB1 Peripheral Module
19-6332; Rev 0; 5/12 MAX31723PMB1 Peripheral Module General Description The MAX31723PMB1 peripheral module provides the necessary hardware to interface the MAX31723 digital thermometer and thermostat to
Evaluates: MAX MAX35104EVKIT2 Evaluation Kit. General Description. Features. MAX35104EVKIT2 and Transducers
Click here for production status of specific part numbers. MAX0EVKIT Evaluation Kit Evaluates: MAX0 General Description The MAX0EVKIT is an Arduino -compatible shield that features the MAX0 time-to-digital
+Denotes lead-free and RoHS compliant. C38 C43, C62, C64, C65, C66, C68, C70, C72, C73, C74, C76 C44 C49, C67, C75 C63, C69, C71, C77
19-4354; Rev 0; 10/08 MAX17108 Evaluation Kit General Description The MAX17108 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17108 10-channel, high-voltage
Detailed Description of Hardware. General Description. Features. Hardware Modification
General Description The MAX14750 evaluation kit (EV kit) is a fully assembled and tested circuit for evaluating the MAX14720/MAX14750 power-management solutions with I2C capability for space-constrained,
MAX14535E Evaluation Kit. Evaluates: MAX14535E
19-4510; Rev 0; 3/09 General Description The MAX14535E evaluation kit (EV kit) demonstrates the MAX14535E double-pole/double-throw (DPDT) analog switch featuring negative signal capability, low onresistance
MAX4899AE Evaluation Kit. Evaluates: MAX4899AE/MAX4899E
19-4025; Rev 0; 1/08 General Description The MAX4899AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4899AE USB 2.0 high-speed, fault-tolerant 4:1 multiplexer. The EV kit routes a
MAX44000PMB1 Peripheral Module
19-6335; Rev 0; 5/12 MAX44000PMB1 Peripheral Module General Description The MAX44000PMB1 peripheral module provides the necessary hardware to interface the MAX44000 ambient and infrared proximity sensor
DS28CZ04 Evaluation System Evaluates: DS28CZ04
General Description The DS28CZ04 evaluation system (EV system) consists of a DS28CZ04 evaluation board (EV board) and a Maxim CMAXQUSB command module. The DS28CZ04 is a 4Kb EEPROM with four nonvolatile
MAX7311 Evaluation Kit. Evaluates: MAX7311
19-4151; Rev 0; 5/08 General Description The MAX7311 evaluation kit (EV kit) provides a proven design to evaluate the MAX7311 I 2 C-compatible 16-bit I/O port expander, with each port configurable as input
+Denotes lead(pb)-free and RoHS compliant. C76, C77, C83 C86
19-5061; Rev 0; 11/09 MAX11046 Evaluation Kit General Description The MAX11046 evaluation kit (EV kit) provides a proven design to evaluate the MAX11046 8-channel, 16-bit, simultaneous-sampling ADC. The
MAX5097A Evaluation Kit. Evaluates: MAX5097A
19-0718; Rev 0; 1/07 MAX5097A Evaluation Kit General Description The MAX5097A evaluation kit (EV kit) demonstrates the MAX5097A in a standard application circuit demonstrating high efficiency. The EV kit
MAX3804 Evaluation Kit. Evaluates: MAX3804. Features DC-Coupled EV Kit SMA Connectors for All High-Speed Inputs and Outputs Fully Assembled and Tested
19-2821; Rev 1; 2/09 General Description The MAX3804 DC-coupled evaluation kit (EV kit) simplifies evaluation of the MAX3804 12.5Gbps settable equalizer. The EV kit enables full testing of the device functions
MAX11205PMB1 Peripheral Module
9-60; Rev 0; / MAX0PMB Peripheral Module General Description The MAX0PMB peripheral module provides the necessary hardware to interface the MAX0 6-bit ADC to any system that utilizes PmodK-compatible expansion
MAX544X Evaluation Kit Evaluates: MAX5441 MAX5444
19-6314; Rev 0; 5/12 MAX544X Evaluation Kit General Description The MAX544X evaluation kit (EV kit) provides a proven design to evaluate the MAX5441 MAX5442 serial-input, voltage-output, 16-bit digital-to-analog
MAX3232PMB1 Peripheral Module
19-6319; Rev 0; 5/12 MAX3232PMB1 Peripheral Module General Description The MAX3232PMB1 peripheral module provides the necessary hardware to interface the MAX3232E true RS-232 transceiver to any system
Evaluates: MAXM MAXM22511 Evaluation Kit. General Description. Features. Quick Start. Startup Procedure. Required Equipment
Click here for production status of specific part numbers. MAXM Evaluation Kit Evaluates: MAXM General Description The MAXM evaluation kit (EV kit) is a fully assembled and tested PCB that demonstrates
Evaluates: MAX14746/MAX MAX14746 Evaluation Kit. General Description. Benefits and Features. Detailed Description of Hardware.
Click here for production status of specific part numbers. General Description The MAX7 evaluation kit (EV kit) is a fully assembled and tested circuit for evaluating the MAX7/ MAX77 charger detectors
+Denotes lead(pb)-free and RoHS compliant. Maxim Integrated Products 1
19-4957; Rev 0; 9/09 General Description The MAX3162 evaluation kit (EV kit) provides a proven design to evaluate the MAX3162 programmable RS-232/ RS-485/422 multiprotocol transceiver. The MAX3162 EV kit
Obsolete. LX1800 SMBus TO ANALOG INTERFACE
LX1800 SMBus TO ANALOG INTERFACE TM Page 1 INTRODUCING TO PRODUCT The LX1800 Evaluation Board is available from for evaluating the functionality and performance of the LX1800 SMBus to Analog Interface
Features. General Description. Component List
MAX5988A Evaluation Kit Evaluates: MAX5988A General Description The MAX5988A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet port, network powered-device
Evaluates: MAX MAX44211 Evaluation Kit. Quick Start. General Description. Benefits and Features. Required Equipment.
General Description The MAX44211 evaluation kit (EV kit) provides a proven design to evaluate the MAX44211 high-current differential line driver for powerline communications (PLC). The line driver is an
+Denotes lead-free and RoHS-compliant.
19-0993; Rev 0; 9/07 MAX4209 Evaluation Kit General Description The MAX4209 evaluation kit (EV kit) simplifies evaluation of the MAX4208 ultra-low offset/drift, fixed gain, precision instrumentation amplifier
+Denotes lead-free and RoHS-compliant
19-0997; Rev 0; 9/07 MAX4208 Evaluation Kit General Description The MAX4208 evaluation kit (EV kit) simplifies evaluation of the MAX4208 ultra-low offset/drift, adjustable gain, precision instrumentation
+Denotes lead-free and RoHS compliant.
19-2446; Rev 1; 6/08 MAX17062 Evaluation Kit General Description The MAX17062 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages required for active-matrix,
FUNCTIONAL BLOCK DIAGRAM DIGITAL POWER SUPPLY +5V +3.3V EXT. EXTERNAL ANALOG POWER SUPPLY V LOGIC V DD V SS SPI INTERFACE RDY RESET AD5292 GND
Evaluation Board for the 10-Bit, Serial Input, High Voltage Digital Potentiometer EVAL-AD5292EBZ FEATURES Full-featured evaluation board for the AD5292 Wiper buffer 4-wire ohm measurement capability Various
General Description. Features. Component List. Component Suppliers
General Description The MAX5911 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX5911 fully integrated hot-swap solution for negative supply
Evaluates: MAX40009/MAX MAX40009 Evaluation Kit. Quick Start. General Description. Procedure. Features. Required Equipment
General Description The MAX40009 evaluation kit (EV kit) is a fully assembled and tested PC board that evaluates the MAX40008/ MAX40009 single comparator with shutdown input. This EV kit comes with a push-pull
MAX54X Evaluation Kit Evaluates: MAX541/MAX542
19-6340; Rev 0; 5/12 MAX54X Evaluation Kit General Description The MAX54X evaluation kit (EV kit) provides a proven design to evaluate the MAX541/MAX542 serial-input, voltage-output, 16-bit digital-to-analog
MAX16128/MAX16129 Evaluation Kits. Evaluate: MAX16128/MAX General Description. Features. Component List
General Description The MAX16128/MAX16129 evaluation kits (EV kits) demonstrate high overvoltage protection of the MAX16128/ MAX16129 for automotive applications that must survive load-dump and high-voltage
+Denotes lead-free/rohs-compliant. J5 1 J10 J13 4 J17 1 L1 1 L2 1 L4 L7 4
19-4156; Rev 0; 5/08 E V A L U A T I O N K I T A V A I L A B L E General Description The MAX3674 evaluation kit (EV kit) is a fully assembled and tested demonstration board that simplifies evaluation of
+Denotes lead(pb)-free and RoHS compliant.
19-4545; Rev 0; 4/09 General Description The MAX13235E evaluation kit (EV kit) provides a proven design to evaluate the MAX13235E, a 3Mbps RS-232 transceiver with low-voltage interface and enhanced electrostatic
IMU Axis Gyro Evaluation Board Application Note
IMU-3000 3-Axis Gyro Evaluation Board Application Note A printed copy of this document is NOT UNDER REVISION CONTROL unless it is dated and stamped in red ink as, REVISION CONTROLLED COPY. InvenSense,
Evaluates: MAX MAX31856 Evaluation System. General Description. Features. EV System Contents. MAX31856 EV Kit Files. MAX31856 EV System Photo
General Description The MAX31856 evaluation system (EV system) provides the hardware and software necessary to evaluate the MAX31856 thermocouple-to-digital converter. The EV system includes the MAX31856PMB1
MAX5318 Evaluation System Evaluates: MAX5318
General Description The MAX5318 evaluation kit (EV kit) provides a proven design to evaluate the MAX5318 18-bit high-accuracy voltage output DAC with digital gain and offset control. The EV kit also includes
DEMO MANUAL DC2196A 8-Channel 16-Bit/12-Bit ±10V V OUT SoftSpan DACs with 10ppm/ C Max Reference. Description
Description Demonstration circuit 96A features the LTC 666, 8-channel 6-Bit/-Bit ±0V V OUT SoftSpan DACs with 0ppm/ C max reference in a 5mm 5mm QFN package. This device features per-channel SoftSpan configuration
MAX13335E Evaluation Kit Evaluates: MAX13335E/MAX13336E
19-6290; Rev 0; 4/12 General Description The MAX13335E evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX13335E automotive audio receiver. The IC features a dual automotive
+Denotes lead(pb)-free and RoHS compliant. C35 1 C36 1 D2 1 D3 1 FB1 1 P1 1
19-4306; Rev 0; 10/08 General Description The MAX9132 evaluation kit (EV kit) provides a proven design to evaluate the MAX9132 high-speed multipleport LVDS crossbar switches. The MAX9132 has three input
Evaluates: MAX98357A/MAX98357B (TQFN) MAX98357 Evaluation System (TQFN)
General Description The MAX98357 development board (DEV board) is a fully assembled and tested PCB that evaluates the MAX98357 I2S digital input Class D power amplifier. The DEV board operates from a single
DS1086LPMB1 Peripheral Module
General Description The DS1086LPMB1 peripheral module provides the necessary hardware to interface the DS1086L.V spread-spectrum EconOscillatorK to any system that utilizes PmodK-compatible expansion ports
EVAL-ADG2128EB. Evaluation Board I 2 C CMOS, 8 12 Analog Switch Array with Dual/Single Supplies FEATURES DESCRIPTION
Evaluation Board I 2 C CMOS, 8 12 Analog Switch Array with Dual/Single Supplies EVAL-ADG2128EB FEATURES Full featured evaluation board for ADG2128 Various link options Direct hook up to USB port of PC
MAX44008 Evaluation System Evaluates: MAX44008
General Description The MAX44008 evaluation system (EV system) includes one MAX44008 evaluation kit (EV kit) and one MAX44008 daughter board. The EV kit is a fully assembled and tested PCB that evaluates
here MAX20328A Evaluation Kit Evaluates: MAX20328A, MAX20328 General Description Quick Start Required Equipment Optional Equipment Features
Click here for production status of specific part numbers. MAX8A Evaluation Kit Evaluates: MAX8A, MAX8 General Description The MAX8A evaluation kit (EV kit) is a fully assembled and tested circuit for
Evaluates: MAX MAX20743 Evaluation Kit. General Description. Quick Start. Features. Required Equipment. Optional Equipment.
MAX07 Evaluation Kit Evaluates: MAX07 General Description The MAX07 Evaluation Kit (EV kit) serves as a reference platform for evaluating the MAX07 voltage regulator IC. This single-chip, integrated switching
S Measures Current on a Fixed 400mA Range S On-Board LCD Display of Conversion Results S Proven PCB Layout S Fully Assembled and Tested
19-5204; Rev 0; 4/10 MAX134 Evaluation Kit General Description The MAX134 evaluation kit (EV kit) provides a proven design to evaluate the MAX134 3¾-digit digital multimeter. The EV kit measures volts,
+Denotes lead(pb)-free and RoHS compliant.
19-4161; Rev 1; 12/08 MAX5498 Evaluation Kit General Description The MAX5498 evaluation kit (EV kit) is an assembled and tested PCB that demonstrates the MAX5498 10-bit (1024-tap), dual, nonvolatile, SPI
KPIC-0818P (V050919) Devices Included in this Data sheet: KPIC-0818P
Devices Included in this Data sheet: KPIC-0818P Features: Carefully designed prototyping area Accepts 8 pin PIC12 series micro-controllers Accepts 14 and 18 Pin PIC16 series Accepts some 8,14 and 18 pin
MAX3983 SMA Connector Evaluation Kit
19-3340; Rev 0, 7/04 MAX3983 SMA Connector Evaluation Kit General Description The MAX3983 SMA Connector evaluation kit (EV Kit) is an assembled demonstration board that provides electrical evaluation of
+Denotes lead(pb)-free and RoHS compliant. FOUTL-, FOUTL+, FOU TR-, FO U TR+, V D D, P G N D
19-4071; Rev 1; 9/09 MAX9736A Evaluation Kit General Description The MAX9736A evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that configures the MAX9736A Class D amplifier
Evaluates: MAX MAX77818 EV System. General Description. Required Equipment. Initial Test Setup. Applications. Benefits and Features
General Description The MAX77818 evaluation system (EV system) consists of a MAX77818 evaluation kit (EV kit) and a companion Maxim MINIQUSB interface board. The MAX77818 EV kit is an assembled and tested
Universal PMIC 40V Quad Output Digital PWM/PFM Demo Board
December 2014 Rev. 1.0.0 GENERAL DESCRIPTION The XR77129EVB-DEMO-1 board is a complete four channel power system. It is configured to provide 5.0V, 12V, 3.3V and 2.5V at a maximum of 5A, 3A, 5A and 10A
Propeller Project Board USB (#32810)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
Skywire BeagleBone Black Cape Data Sheet
Skywire BeagleBone Black Cape Data Sheet NimbeLink Corp Updated: January 2018 PN 30122 rev 2 NimbeLink Corp. 2016. All rights reserved. 1 Table of Contents Table of Contents 2 Introduction 3 Overview 3
MAX6620 Evaluation Kit/Evaluation System
19-4069; Rev 0; 3/08 MAX6620 Evaluation Kit/Evaluation System General Description The MAX6620 evaluation system (MAX6620EVCMAXQU+) consists of the MAX6620 evaluation kit (MAX6620EVKIT+) and the Maxim CMAXQUSB+