ARDBOX FAMILY USER GUIDE
|
|
|
- Audra Nelson
- 5 years ago
- Views:
Transcription
1 ARDBOX FAMILY USER GUIDE
2 Page2 Ardbox User Guide: Contents ARDBOX FAMILY GUIDE... 3 ARDBOX PNP GUIDE... 4 ARDBOX TCH GUIDE... 6 ARDBOX ANALOG GUIDE... 8 ARDBOX RELAY GUIDE Software Interface:... 13
3 Page3 COMPACT PLC. ARDBOX FAMILY GUIDE A compact PLC based in Open Source Hardware technology. With different Input/Outputs Units. COMPACT PLC ARDUINO ARDBOX MODEL TYPE PNP TCH Relay ANALOG Input Voltage I max. 0,5A Size 100x45x115 Clock Speed 16MHz Flash Memory 32KB of wich 0,5KB used by bootlader SRAM 2KB EEPROM 1KB I2C hasta 127 elementos. Puerto Serie RS-232 (1) Comunicaciones TOTAL Input points (+2) (+2) 10 TOTAL Output points Type of signals Input/Output configurable (5Vcc) * Analog Input 10bit () * Digital Input () * Interrupt Input HS () (5Vcc) I/O s configurable * Analog Output () * Digital Output () * PWM Output 8bit () * Relay (220Vac - 5A) Expandability I2C elements - Serial Port RS-232 Reference IS.AB20PNP.base IS.AB20TCH.base IS.AB18REL.base IS.AB20AN.base * By using this type of signal can no longer use Digital signal () You must to read product Datasheet. (1) With previous request. IMPORTANT 1
4 Page4 ARDBOX PNP GUIDE Numero de elementos Entrada / salida Tipo de señal Voltaje trabajo 14 Out Digital 24 Vcc Pines Arduino 0,1,2,3,4,5,6,7,8,9,10,11, 12,13 Ref. IS.AB20PNP.base 6 Inputs: - (6x) Semi-analog () / Digital () Inputs, configurable by software You need recalibrate your analog values. 14 Outputs: - (14x) Digitals () 6 In Analog/ digital (10 bits: ) A0-A5 * 10 Bits: * Configuration by software CPU Characteristics Comunication Characteristics Microcontroller ATmega328 Flash Memory SRAM EEPROM Clock Speed 32 KB of which 0,5 KB used by bootloader 2 KB 1 KB 16 MHz Comunicaciones Serial External interrupts 0 RX 1 TC 2,3 Attachi nterrup t() SPI Comunication 10 SPI 11 MOSI 12 MISO 13 SCK TWI Comunication / Wire library I2C A4 TWI A5 SCL, Only You need Arduino IDE for programming these PLCs
5 Page5 PINOUT: Type of signal: Out: Digital Input: Imax Imax: 80mA It have internal resistance:
6 Page6 ARDBOX TCH GUIDE Ref. IS.AB20TCH.base Numero de elementos Entrada / salida Tipo de señal Voltaje trabajo Out Digital 24 Vcc Pines Arduino 4, 5, 6, 7, 8, 9, 10, 11 (220Vac Out Relay 12,13 5A) A0-A5 * Analog/ (10 bits: In 10 Bits: 0- digital ) 1023 In Digital 0,1,2,3 * Configuration by software 10 Inputs: - (6x) Semi-analog () / Digital () Inputs, configurable by software You need recalibrate your analog values. - (4x) Digital () Inputs 10 Outputs: - (8x) Digitals () - (2x) Relay (220Vac-5A) CPU Characteristics Comunication Characteristics Microcontroller ATmega328 Flash Memory SRAM EEPROM Clock Speed 32 KB of which 0,5 KB used by bootloader 2 KB 1 KB 16 MHz Comunicaciones Serial External interrupts 0 RX 1 TC 2,3 Attachi nterrup t() SPI Comunication 10 SPI 11 MOSI 12 MISO 13 SCK TWI Comunication / Wire library I2C A4 TWI A5 SCL, Only You need Arduino IDE for programming these PLCs
7 Page7 PINOUT: Type of signal: Out: Digital Input: Imax Imax: 80mA It have internal resistance: Relay output 220Vac 5A
8 Page8 ARDBOX ANALOG GUIDE Ref.IS.AB20AN.base Numero de elementos Entrada / salida Out Tipo de señal Analog / PWM/ digital Voltaje trabajo 0-10 Vcc / (0-254) Pines Arduino 3,5,6,9,10,1 1, 13 8 Bits:0-254 Out Digital 0,1,7 In Analog/ digital (10 bits: ) A0-A5 * 10 Bits: ,8,12 8 Bits:0-254 In Digital 2 10 Inputs: - (9x) Analog () / Digital () Inputs, configurable by jumpers 1 - (1x) Digital inputs PNP (. 10 Outputs: - (4x) Digitals () / Analog () / PWM (). - (3x) Analog () - (3x) Digitals () * Configuración por software y hardware (jumpers) CPU Characteristics Comunication Characteristics Microcontroller ATmega328 Flash Memory SRAM EEPROM Clock Speed 32 KB of which 0,5 KB used by bootloader 2 KB 1 KB 16 MHz You need Arduino IDE for programming these PLCs Comunicaciones Serial External interrupts 0 RX 1 TC 2,3 Attachi nterrup t() SPI Comunication 10 SPI 11 MOSI 12 MISO 13 SCK TWI Comunication / Wire library I2C A4 TWI A5 SCL, Only Pin 2
9 Page9 PINOUT: Type of signal: OUT: Analog 0-10Vcc / PWM / Digital Out: Digital Input: Imax Imax: 12mA () 30mA (10Vcc) Imax: 80mA It have internal resistance:
10 Page10 ARDBOX RELAY GUIDE Ref. IS.AB18REL.base Numero de elementos 8 8 Entrada / salida Out In Tipo de señal Relay Analog/ digital Voltaje trabajo (220Vac 5A) (10 bits: ) Pines Arduino 4, 5, 6, 7, 8, 9, 10, 11 A0-A5 * 10 Bits: In Digital 0,1,2,3 8 Inputs: - (6x) Semi-analog () / Digital () Inputs, configurable by software You need recalibrate your analog values. - (4x) Digital () Inputs 8 Outputs: - (8x) Relay (220Vac-5A) 2 In/Out: 5Vcc Directly from Arduino 2 In/Out Digital 5Vcc 12,13 * Configuration by software and jumpers CPU Characteristics Comunication Characteristics Microcontroller ATmega328 Flash Memory SRAM EEPROM Clock Speed 32 KB of which 0,5 KB used by bootloader 2 KB 1 KB 16 MHz Comunicaciones Serial External interrupts 0 RX 1 TC 2,3 Attachi nterrup t() SPI Comunication 10 SPI 11 MOSI 12 MISO 13 SCK TWI Comunication / Wire library I2C A4 TWI A5 SCL, Only You need Arduino IDE for programming these PLCs
11 Page11 PINOUT: Type of signal: Out: Relay Input: In/Out configurable Imax 220Vac 5A It have internal resistance: 5Vcc 0.40mA
12 Page12 - Dimension ARDBOX Family: - DIN rail mounting: 45mm de ancho
13 Page13 Software Interface: Arduino IDE is compatible for programm these PLCs. You must to download a start code in at product page in document files section and then It s necessary open it with Arduino IDE. Configuration about Arduino IDE: All Ardbox PLCs use an Arduino Leonardo and you need to choose these opcion in Arduino IDE. About Industrial Shields: SPAIN Avda. Castell de Barberà 26, nave Barberà del Vallès (Barcelona) Tel Mail: industrialshields@industrialshields.com
Products Datasheet. The economic automation products. ü Fast programming with internet community
Products Datasheet Safety in industrial applications: new industrial equipment by Industrial Shields provides economical solutions for industrial applications that require flexibility, safety and high
USER GUIDE ARDBOX RELAY
USER GUIDE ARDBOX RELAY Version: 150715_Ardbox_Relay Page2 Ardbox User Guide: 1 Contents 2 ARDBOX FAMILY GUIDE... 3 3 Precautions... 4 3.1 Arduino Board... 4 3.2 Intended Audience... 4 3.3 General Precautions...
USER GUIDE ARDBOX ANALOG
USER GUIDE ARDBOX ANALOG Version: 150715_Ardbox_Analog Page2 Ardbox User Guide: 1 Contents 2 ARDBOX FAMILY GUIDE... 3 3 Precautions... 4 1.1. Arduino Board... 4 1.2. Intended Audience... 4 1.3. General
USER GUIDE ARDBOX ANALOG
USER GUIDE ARDBOX ANALOG Version: 00300170_Ardbox_Analog Page2 Ardbox User Guide: 1 Contents 2 ARDBOX... 3... 4 3 Precautions... 4 1.1. Arduino Board... 4 1.2. Intended Audience... 4 1.3. General Precautions...
USER GUIDE ARDBOX ANALOG HF. Version: IS_AB20ANA.7.1
USER GUIDE ARDBOX ANALOG HF Version: IS_AB20ANA.7.1 Ardbox User Guide: Contents ARDBOX... 3 Precautions... 4 Arduino Board... 4 Intended Audience... 4 General Precautions... 4 Technical Specifications...
M-DUINO FAMILY. M-Duino 21 User Guide: 1 Index
Page1 MDUINO FAMILY MDuino 21 User Guide: 1 Index 2 General Description MDUINO FAMILY product... 3 2.1 Mechanical dimension... 4 3 Precautions... 5 3.1 Arduino Board... 5 3.2 Intended Audience... 5 3.3
M-DUINO R FAMILY. M-Duino 19R/38R/57R User Guide: 1 Index
Page1 M-DUINO R FAMILY M-Duino 19R/38R/57R User Guide: 1 Index 2 General Description M-DUINO R FAMILY product... 3 2.1 Mechanical dimension... 4 3 Precautions... 5 3.1 Arduino Board... 5 3.2 Intended Audience...
USER GUIDE. PLC Arduino ARDBOX 20 I/Os Relay HF. Cat. Nº: ABOX
USER GUIDE PLC Arduino ARDBOX 20 I/Os Relay HF Page2 PLC Arduino ARDBOX 20 I/Os Relay HF User Guide Revised March 2018 This user guide is for version PLC Arduino ARDBOX 20 I/Os Relay HF, with Reference
USER GUIDE PLC Arduino ARDBOX 20 I/Os Analog HF Modbus
USER GUIDE PLC Arduino ARDBOX 20 I/Os Analog HF Modbus Cat. Nº: ABOX-103-001-71 Page2 PLC Arduino ARDBOX 20 I/Os Relay HF User Guide Revised March 2018 This user guide is for version PLC Arduino ARDBOX
Sanguino TSB. Introduction: Features:
Sanguino TSB Introduction: Atmega644 is being used as CNC machine driver for a while. In 2012, Kristian Sloth Lauszus from Denmark developed a hardware add-on of Atmega644 for the popular Arduino IDE and
ARDUINO MICRO WITHOUT HEADERS Code: A000093
ARDUINO MICRO WITHOUT HEADERS Code: A000093 Arduino Micro is the smallest board of the family, easy to integrate it in everyday objects to make them interactive. The Micro is based on the ATmega32U4 microcontroller
Arduino Uno. Arduino Uno R3 Front. Arduino Uno R2 Front
Arduino Uno Arduino Uno R3 Front Arduino Uno R2 Front Arduino Uno SMD Arduino Uno R3 Back Arduino Uno Front Arduino Uno Back Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet).
Arduino ADK Rev.3 Board A000069
Arduino ADK Rev.3 Board A000069 Overview The Arduino ADK is a microcontroller board based on the ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, based on the MAX3421e
M-DUINO FAMILY. M-Duino Family User Guide: Ref. IS.MDUINO.XXX
MDUINO FAMILY MDuino Family User Guide: Ethernet PLC User Guide Revised March 2018 Preface This User Guide is been implemented by Boot & Work, S.L. working under the name Industrial Shields. Purpose of
ARDUINO MEGA ADK REV3 Code: A000069
ARDUINO MEGA ADK REV3 Code: A000069 OVERVIEW The Arduino MEGA ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e
ARDUINO UNO REV3 Code: A000066
ARDUINO UNO REV3 Code: A000066 The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can
keyestudio Keyestudio MEGA 2560 R3 Board
Keyestudio MEGA 2560 R3 Board Introduction: Keyestudio Mega 2560 R3 is a microcontroller board based on the ATMEGA2560-16AU, fully compatible with ARDUINO MEGA 2560 REV3. It has 54 digital input/output
ARDUINO MINI 05 Code: A000087
ARDUINO MINI 05 Code: A000087 The Arduino Mini is a very compact version of the Arduino Nano without an on board USB to Serial connection The Arduino Mini 05 is a small microcontroller board originally
M-DUINO PLUS FAMILY. M-Duino PLUS Family User Guide: Ref. IS.MDUINO.XXX
MDUINO PLUS FAMILY MDuino PLUS Family User Guide: Ethernet PLC User Guide Revised March 2018 Preface This User Guide is been implemented by Boot & Work, S.L. working under the name Industrial Shields.
ARDUINO MEGA 2560 REV3 Code: A000067
ARDUINO MEGA 2560 REV3 Code: A000067 The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D
ESPino - Specifications
ESPino - Specifications Summary Microcontroller ESP8266 (32-bit RISC) WiFi 802.11 (station, access point, P2P) Operating Voltage 3.3V Input Voltage 4.4-15V Digital I/O Pins 9 Analog Input Pins 1 (10-bit
ARDUINO UNO REV3 SMD Code: A The board everybody gets started with, based on the ATmega328 (SMD).
ARDUINO UNO REV3 SMD Code: A000073 The board everybody gets started with, based on the ATmega328 (SMD). The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output
ARDUINO YÚN MINI Code: A000108
ARDUINO YÚN MINI Code: A000108 The Arduino Yún Mini is a compact version of the Arduino YUN OVERVIEW: Arduino Yún Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating
ARDUINO LEONARDO WITH HEADERS Code: A000057
ARDUINO LEONARDO WITH HEADERS Code: A000057 Similar to an Arduino UNO, can be recognized by computer as a mouse or keyboard. The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet).
Beetle SKU:DFR0282. Contents. Introduction
Beetle SKU:DFR0282 From Robot Wiki Beetle Contents 1 Introduction 2 Specification 3 PinOut 4 Tutorial o 4.1 Power o 4.2 Programming o 4.3 Example Code 5 Trouble shooting Introduction The Beetle is a minimalized
IDUINO for maker s life. User Manual. For IDUINO Mega2560 Board(ST1026)
User Manual For IDUINO Mega2560 Board(ST1026) 1.Overview 1.1 what is Arduino? Arduino is an open-source prototyping platform based on easy-to-use hardware and software. Arduino boards are able to read
Arduino Uno R3 INTRODUCTION
Arduino Uno R3 INTRODUCTION Arduino is used for building different types of electronic circuits easily using of both a physical programmable circuit board usually microcontroller and piece of code running
ARDUINO LEONARDO ETH Code: A000022
ARDUINO LEONARDO ETH Code: A000022 All the fun of a Leonardo, plus an Ethernet port to extend your project to the IoT world. You can control sensors and actuators via the internet as a client or server.
DFRduino M0 Mainboard (Arduino Compatible) SKU: DFR0392
DFRduino M0 Mainboard (Arduino Compatible) SKU: DFR0392 Introduction DFRduino M0 is the only Arduino main board that supports 5V standard Logic level and adopts ARM Cortex-M0. [null It is unsatisfactory
Distributed Real- Time Control Systems
Distributed Real- Time Control Systems Lecture 2 Embedded Systems Basics A. Bernardino, C. Silvestre, IST- ACSDC 1 What are embedded systems? Small computers to efficiently address specific purposes, e.g.
Ultratronics v1.0 DATASHEET
Ultratronics v1.0 DATASHEET Author Bart Meijer Date November 21 st, 2017 Document version 1.2 Ultratronics Datasheet Reprapworld.com 1 PRODUCT OVERVIEW Ultratronics is the latest development in 3D printer
ARDUINO BOARD LINE UP
Technical Specifications Pinout Diagrams Technical Comparison Board Name Processor Operating/Input Voltage CPU Speed Analog In/Out Digital IO/PWM USB UART 101 Intel Curie 3.3 V/ 7-12V 32MHz 6/0 14/4 Regular
IDUINO for maker s life. User Manual. For IDUINO development Board.
User Manual For IDUINO development Board 1.Overview 1.1 what is Arduino? Arduino is an open-source prototyping platform based on easy-to-use hardware and software. Arduino boards are able to read inputs
ARDUINO PRIMO. Code: A000135
ARDUINO PRIMO Code: A000135 Primo combines the processing power from the Nordic nrf52 processor, an Espressif ESP8266 for WiFi, as well as several onboard sensors and a battery charger. The nrf52 includes
Breeze Board. Type A. User Manual.
Breeze Board Type A User Manual www.dizzy.co.za Contents Introduction... 3 Overview Top... 4 Overview Bottom... 5 Getting Started (Amicus Compiler)... 6 Power Circuitry... 7 USB... 8 Microcontroller...
ARDUINO YÚN Code: A000008
ARDUINO YÚN Code: A000008 Arduino YÚN is the perfect board to use when designing connected devices and, more in general, Internet of Things projects. It combines the power of Linux with the ease of use
Bluno M0 Mainboard SKU: DFR0416
Bluno M0 Mainboard SKU: DFR0416 Bluno M0 is the only ARM Cortex-M0 Arduino Microcontroller that supports 5V standard logic level. With built-in Bluetooth chip, Bluno M0 supports multi-functions such as
Prototyping Module Datasheet
Prototyping Module Datasheet Part Numbers: MPROTO100 rev 002 Zenseio LLC Updated: September 2016 Table of Contents Table of Contents Functional description PROTOTYPING MODULE OVERVIEW FEATURES BLOCK DIAGRAM
Breeze Board. Type B. User Manual.
Breeze Board Type B User Manual www.dizzy.co.za Contents Introduction... 3 Overview Top... 4 Overview Bottom... 5 Getting Started (USB Bootloader)... 6 Power Circuitry... 7 USB... 8 Microcontroller...
Arduino Ethernet. Arduino Ethernet Rev. 2 board front view with optional PoE module. (http://arduino.cc/en/uploads/main/arduinoethernetfrontpoe.
Arduino - ArduinoBoardEthernet Page 1 of 10 Arduino Ethernet (http://arduino.cc/en/uploads/main/arduinoethernetfront.jpg) Arduino Ethernet Rev. 3 board front view (http://arduino.cc/en/uploads/main/arduinoethernetback.jpg)
Distributed Real-Time Control Systems. Module 3 Hardware for Real Time Distributed Control Systems
Distributed Real-Time Control Systems Module 3 Hardware for Real Time Distributed Control Systems 1 General Topology of Real-Time Distributed Control Systems System Management Data Backup Intranet User
EXL x240 Graphic LCD Smart Module 3,8 SHORT FORM TECHNICAL SPECIFICATIONS. Via di Corticella, Bologna, Italy
320x240 Graphic LCD Smart Module 3,8 SHORT FORM TECHNICAL SPECIFICATIONS www.exelmicroel.it Via di Corticella, 201 40128 - Bologna, Italy Tel: +39 051 6380211 Fax: +39 051 6380226 exelbo@exelmicroel.it
Lesson 5 Arduino Prototype Development Platforms. Chapter-8 L05: "Internet of Things ", Raj Kamal, Publs.: McGraw-Hill Education
Lesson 5 Arduino Prototype Development Platforms 1 Arduino Boards, Modules And Shields Popular AVR MCU based products Each board has clear markings on the connection pins, sockets and in-circuit connections
MINITRONICS v1.0 DATASHEET
MINITRONICS v. DATASHEET Author Bart Meijer Date 2th of April 23 Document version. ReprapWorld.com PRODUCT OVERVIEW Minitronics is the latest development of ReprapWorld.com. It's designed to be an easy
How to Use an Arduino
How to Use an Arduino By Vivian Law Introduction The first microcontroller, TMS-1802-NC, was built in 1971 by Texas Instruments. It owed its existence to the innovation and versatility of silicon and the
JeeNode V2. A small *duino-ish MPU board with a wireless RF module. Jean-Claude Wippler jeelab.equi4.com March 2009
JeeNode V2 A small *duino-ish MPU board with a wireless RF module Overview Jean-Claude Wippler jeelab.equi4.com March 2009 The JeeNode is a small micro-controller board which can be used for a variety
Gambar A.1 Board Arduino
LAMPIRAN A ARDUINO UNO Gambar A.1 Board Arduino The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog
Arduino Smart Robot Car Kit User Guide
User Guide V1.0 04.2017 UCTRONIC Table of Contents 1. Introduction...3 2. Assembly...4 2.1 Arduino Uno R3...4 2.2 HC-SR04 Ultrasonic Sensor Module with Bracket / Holder...5 2.3 L293D Motor Drive Expansion
Lesson 6 Intel Galileo and Edison Prototype Development Platforms. Chapter-8 L06: "Internet of Things ", Raj Kamal, Publs.: McGraw-Hill Education
Lesson 6 Intel Galileo and Edison Prototype Development Platforms 1 Intel Galileo Gen 2 Boards Based on the Intel Pentium architecture Includes features of single threaded, single core and 400 MHz constant
CSCI 6907 PROJECT PROPOSAL LIGHTS OUT MANAGEMENT
CSCI 6907 PROJECT PROPOSAL LIGHTS OUT MANAGEMENT JAMES LEE JAMESLEE@GWU.EDU. Project Abstract I am a system administrator who manages hundreds of Unix systems. One of the essential tools to ensure I don
Approved by: Date CET Initials Name Justification :20:12 NTJ Niels Thybo Johansen
Instruction Selection Guideline Document No.: INS10027 Version: 6 Description: This document introduces the ZW0201, and ZW0301 Single Chip based families, and suggests which module to choose for a given
Outline. A Computerbased. Instrument for Measuring Distance for a Soccer Free- Kick 10/16/2016. Andy Vongphachanh Matthew Weeks
A Computerbased Instrument for Measuring Distance for a Soccer Free- Kick Andy Vongphachanh Matthew Weeks Outline Introduction Scope Physical Diagram System Architecture Hardware Software Construction
XNUCLEO-F030R8, Improved STM32 NUCLEO Board
XNUCLEO-F030R8, Improved STM32 NUCLEO Board STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F030R8 XNUCLEO-F030R8 Features Compatible with NUCLEO-F030R8, onboard Cortex-M0 microcontroller
Motor Controller Cooling System (MCCS) Maintenance Manual
1 Lafayette College Electrical and Computer Engineering Motor Controller Cooling System (MCCS) Maintenance Manual ECE 492 Spring 2017 2 Table of Contents Overview 3 Safety 4 Electrical System Components
ARDUINO M0 PRO Code: A000111
ARDUINO M0 PRO Code: A000111 The Arduino M0 Pro is an Arduino M0 with a step by step debugger With the new Arduino M0 Pro board, the more creative individual will have the potential to create one s most
DEVBOARD3 DATASHEET. 10Mbits Ethernet & SD card Development Board PIC18F67J60 MICROCHIP
DEVBOARD3 DATASHEET 10Mbits Ethernet & SD card PIC18F67J60 MICROCHIP Version 1.0 - March 2009 DEVBOARD3 Version 1.0 March 2009 Page 1 of 7 The DEVBOARD3 is a proto-typing board used to quickly and easily
Alessandra de Vitis. Arduino
Alessandra de Vitis Arduino Arduino types Alessandra de Vitis 2 Interfacing Interfacing represents the link between devices that operate with different physical quantities. Interface board or simply or
TMCM-302 Stepper Motor Motion Control Module
DATA SHEET (V0.8 / October st, 2002) PRELIMINARY Stepper Motor Motion Control Module PRELIMINARY DATA SHEET TRINAMIC Microchips GmbH Deelbögenkamp 4C D 22297 Hamburg GERMANY T +49 - (0) 40-5 48 06-0 F
User s manual. Programmable panel meter IPD
User s manual Programmable panel meter IPD Assembly Wall assembly: +0,5 +0,2 Window of 46 x 91 mm (2.5" x 3.5" ) Made with ABS (UL94-HB) -0-0 General cares in the installation The equipments must not be
Power Supply, Arduino MEGA 2560, and Stepper Motors Connections
Power Supply, Arduino MEGA 2560, and Stepper Motors Connections By: Maram Sulimani Abstract: Arduino MEGA 2560 is required for this project to control the movement of the 3D printer axis and its extruder.
ARDUINO MEGA INTRODUCTION
ARDUINO MEGA INTRODUCTION The Arduino MEGA 2560 is designed for projects that require more I/O llines, more sketch memory and more RAM. With 54 digital I/O pins, 16 analog inputs so it is suitable for
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 4 can be used as PWM outputs), 6 analog inputs, 4 UARTs (hardware serial
Arduino UNO R3. Features of the Arduino UNO:
Arduino UNO R This is the Arduino Uno R. In addition to all the features of the previous board, the Uno now uses an ATmegaU instead of the U found on the Uno (or the FTDI found on previous generations).
Bluno Mega 2560 (SKU:DFR0323)
Bluno Mega 2560 (SKU:DFR0323) From Robot Wiki Contents 1 Introduction 2 Specification 3 Pin Out 4 Supported Android Devices 5 Supported Apple Devices 6 Tutorial o 6.1 More advantages o 6.2 The serial port
Arduino Dock 2. The Hardware
Arduino Dock 2 The Arduino Dock 2 is our supercharged version of an Arduino Uno R3 board. These two boards share the same microcontroller, the ATmel ATmega328P microcontroller (MCU), and have identical
DIGI POT 3 click. PID: MIKROE 3016 Weight: 25 g
DIGI POT 3 click PID: MIKROE 3016 Weight: 25 g DIGI POT 3 click is a versatile and feature-rich digital potentiometer click with 1024 steps and an internal non-volatile memory (EEMEM), which can be used
SH1030 Rev Introduction. Ultra low power DASH7 Arduino Shield Modem. Applications. Description. 868 MHz. Features
SH1030 Rev. 1.2 Applications Wireless sensor network Data acquisition equipment Security systems Industrial monitor and control Internet of things (IoT) Ultra low power DASH7 Arduino Shield Modem 868 MHz
HZX N03 Bluetooth 4.0 Low Energy Module Datasheet
HZX-51822-16N03 Bluetooth 4.0 Low Energy Module Datasheet SHEN ZHEN HUAZHIXIN TECHNOLOGY LTD 2017.7 NAME : Bluetooth 4.0 Low Energy Module MODEL NO. : HZX-51822-16N03 VERSION : V1.0 1.Revision History
Arduino Diecimila Pinouts 697B B8D-A50A-61944C26074F
mightwerk Resources for creators and innovators outs 697B1380-9797-4B8D-A50A-61944C26074F Introduction... 1 4-pin Expansion Header out... 2 6-pin ICSP Header out... 3 Map from to... 4 Map from ATmega328
Microprocessors And Microcontrollers (Practical)
Microprocessors And Microcontrollers (Practical) Semester : 4 th, 5 th (TL, ES) Course Code : ES256, ES313 By: Dr. Attiya Baqai Assistant Professor, Department of Electronics, MUET. 3 Introduction to Programming
Farklı Arduino Boardlar
Farklı Arduino Boardlar Arduino UNO R3 Microcontroller ATmega328P (8 bit) DataSheet http://ww1.microchip.com/downloads/en/devicedoc/atmel- 42735-8-bit-AVR-Microcontroller-ATmega328-328P_Datasheet.pdf Operating
MEXLE. International Educational Platform. International Educational Platform. for Informatics based on Embedded Systems
MEXLE for Informatics based on Embedded Systems Overview 1. Introduction 2. MiniMEXLE Hardware 3. ATMEL AVR Microcontrollers 4. Teaching Informatics with MEXLE 2 HSHN G. Gruhler (2006) Einfuehrung-miniMEXLE-AVR.ppt
Various power connectors. 3.3V regulator. 64K Flash (Internal) 2K EEPROM (Internal) 4K SRAM (Internal) JA Mem Adr/ Data. Doc: page 1 of 9
Cerebot II Board Reference Manual Revision: September 14, 2007 Note: This document applies to REV B of the board. www.digilentinc.com 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview
Pridgen Vermeer Robotics Xmega128 Manual
Features: 12x PWM signals with 5V supply 8x A/D Inputs with 3.3V supply 2x RS 232 Terminals 1x SPI Interface 4x 8-bit Digital IO ports 3.3V Power Bus LCD Header (4-bit mode) Smart Power Connecter Power
Cookie User Manual. For NuMicro Edition 1.0. Rev. 1.0 Release: forum.coocox.org.
Cookie User Manual For NuMicro Edition 1.0 Rev. 1.0 Release: 2012-08-09 Website: Forum: Techinal: Market: www.coocox.org forum.coocox.org master@coocox.com market@coocox.com 1 Introduction Cookie is an
MicroBolt. Microcomputer/Controller Featuring the Philips LPC2106 FEATURES
Microcomputer/Controller Featuring the Philips LPC2106 FEATURES Powerful 60 MHz, 32-bit ARM processing core. Pin compatible with 24 pin Stamp-like controllers. Small size complete computer/controller with
User's Guide for the BAM Shield with DICE boards. User Manual. BAM-Shield with DICE-Boards. Author: Konrad Meyer. Page 1 / 13
User's Guide for the BAM Shield with DICE boards User Manual BAM-Shield with DICE-Boards Version:.en Author: Konrad Meyer Date: Page / 3 Index Important notes...3. Warning notices...3.2 General precautions...4.3
Electronics Single Board Computers
Electronics Single Board Computers Wilfrid Laurier University November 23, 2016 Single Board Computers Single Board Computers As electronic devices get smaller and more sophisticated, they often contain
MEGATRONICS v3.0 DATASHEET
MEGATRONICS v3.0 DATASHEET Author Bart Meijer Date 10th of June 2014 Document version 1.2 ReprapWorld.com Megatronics Datasheet Reprapworld.com 1 PRODUCT OVERVIEW Megatronics is based on many famous open-source
AVRUSBPRG1 USB AVR IN SYSTEM PROGRAMMER
AVRUSBPRG1 USB AVR IN SYSTEM PROGRAMMER 2016 Table of Contents 1- Introduction 1.1- AVRUSBPRG1 Features 1.2- Supported Devices 1.3- System Requirement 1.4- Pinout 2- AVRUSBPRG1 Driver Installation 3- Running
Almond - Datasheet November 2015
Robotic Hand Development Board Features 6 Bidirectional Motor control USB Programming (with Bootloader) Arduino IDE Compatible Compatible with Firgelli PQ12 -P Actuators Atmel Atmega2560 Microcontroller
3.3V regulator. JA H-bridge. Doc: page 1 of 7
Digilent Cerebot Board Reference Manual Revision: 11/17/2005 www.digilentinc.com 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The Digilent Cerebot Board is a useful tool for
ATmega48/88/168 Development Board
ATmega// Development Board This is versatile development board for AVR microcontrollers ATmega//. It is good for testing and debugging embedded programs. It has many built-in peripheries connected to microcontroller
EMB128. ere co., ltd.
ATMEGA128 Embedded Board Main Features Atmega128 8-bit RISC CPU (AVR family) Serial EEPROM (I2C), 24LC256 Real Time Clock, DS1307 3V lithium battery keeping time and date 2 channels RS485 2 channels RS232
ARDUINO INDUSTRIAL 1 01 Code: A000126
ARDUINO INDUSTRIAL 1 01 Code: A000126 The Industrial 101 is a small form-factor YUN designed for product integration. OVERVIEW: Arduino Industrial 101 is an Evaluation board for Arduino 101 LGA module.
LPC-P1227 development board USER S MANUAL Initial release, March 2012 Designed by OLIMEX Ltd, 2011
LPC-P1227 development board USER S MANUAL Initial release, March 2012 Designed by OLIMEX Ltd, 2011 All boards produced by Olimex LTD are ROHS compliant Disclaimer: 2012 Olimex Ltd. Olimex, logo and combinations
AVR200 Single Board Computer
Pt.1: By ED SCHOELL* Managing Director, JED Microprocessors Pty Ltd. AVR200 Single Board Computer Professional engineers, students and hobbyists alike will appreciate this lowcost, high-performance development
Bolt 18F2550 System Hardware Manual
1 Bolt 18F2550 System Hardware Manual Index : 1. Overview 2. Technical specifications 3. Definition of pins in 18F2550 4. Block diagram 5. FLASH memory Bootloader programmer 6. Digital ports 6.1 Leds and
KNJN I2C bus development boards
KNJN I2C bus development boards 2005, 2006, 2007, 2008 fpga4fun.com & KNJN LLC http://www.knjn.com/ Document last revision on January 1, 2008 R12 KNJN I2C bus development boards Page 1 Table of Contents
AVR XMEGA Product Line Introduction AVR XMEGA TM. Product Introduction.
AVR XMEGA TM Product Introduction 32-bit AVR UC3 AVR Flash Microcontrollers The highest performance AVR in the world 8/16-bit AVR XMEGA Peripheral Performance 8-bit megaavr The world s most successful
Revision: 05/05/ E Main Suite D Pullman, WA (509) Voice and Fax. Various power connectors. 3.3V regulator
Digilent Cerebot Plus Board Reference Manual Revision: 05/05/2008 www.digilentinc.com 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The Digilent Cerebot Plus Board is a useful
1.6inch SPI Module user manual
1.6inch SPI Module user manual www.lcdwiki.com 1 / 10 Rev1.0 Product Description The 1.6 module is tested using the ESP8266MOD D1 Mini development board, Both the test program and the dependent libraries
General-Purpose Microcontroller Module 12a Hardware Reference Release 1.4a (October 11, 2017)
General-Purpose Microcontroller Module 12a Hardware Reference 1 General-Purpose Microcontroller Module 12a Hardware Reference Release 1.4a (October 11, 2017) Purpose: General-purpose platform to accommodate
JED MICROPROCESSORS PTY LTD
JED MICROPROCESSORS PTY LTD 173 Boronia Rd, Boronia, (PO Box 30), Victoria 3155 Australia Phone: +61 3 9762 3588, Fax: +61 3 9762 5499. http://www.jedmicro.com.au email: jed@jedmicro.com.au JED AVR200
Doc: page 1 of 9
chipkit DP32 Reference Manual Revision: July 10, 2013 Note: This document applies to REV B of the board. 1300 NE Henley Court, Suite 3 Pullman, WA 99163 (509) 334 6306 Voice (509) 334 6300 Fax Overview
LPC-P1227 development board USER S MANUAL Revision B, July 2013 Designed by OLIMEX Ltd, 2011
LPC-P1227 development board USER S MANUAL Revision B, July 2013 Designed by OLIMEX Ltd, 2011 All boards produced by Olimex LTD are ROHS compliant Disclaimer: 2013 Olimex Ltd. Olimex, logo and combinations
4 CHANNEL RELAY BOARD- BLUETOOTH
4 CHANNEL RELAY BOARD- BLUETOOTH www.researchdesignlab.com Page 1 Table of Contents OVERVIEW...3 FEATURES...3 APPLICATION DIAGRAM...4 Bluetooth Module HC 05...5 SPECIFICATION... 5 APPLICATION...5 CIRCUIT
Ant6. 6 Channel H Bridge 3-Axis Bipolar Stepper Motor Controller. Technical Reference Manual PCB Rev 1.0.
Ant6 6 Channel H Bridge 3-Axis Bipolar Stepper Motor Controller Technical Reference Manual PCB Rev 1.0 www.soc-robotics.com Copyright 2008. SOC Robotics, Inc. 1 Manual Rev 0.9 Warranty Statement SOC Robotics
Mega128-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN (317) (317) FAX
Mega128-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN 46268 (317) 471-1577 (317) 471-1580 FAX http://www.prllc.com GENERAL The Mega128-Development board is designed for
Introduction to Microcontrollers
CSE391: Embedded Systems and Interfacing Introduction to Microcontrollers Nazmus Saquib Lecturer Department of Computer Science and Engineering Bangladesh University of Engineering and Technology April