Acterna ONT-30 Optical Network Tester

Transcription

1 Acterna ONT-30 Optical Network Tester Features. 2-slot modular mainframe. Rugged and lightweight casing suitable for field use. Large touch screen and web browser based graphical user interface. Remote control. Field upgradeable. Web browser. User programmable for default configurations. Integrated on-line help. Software update via Internet ONT-30 ± Universal Test Platform for purely optical test applications Fiber networks are rapidly expanding with DWDM transport technologies providing new generations of equipment using multiplexing based on purely optical components. These new optical networks generate the need to qualify non-linear and dispersion effects along the link. The new Acterna OPTICAL NETWORK TESTER platform (ONT), provides manufacturers and operators of fiber networks advanced test solutions today and in the future towards ªPhotonic Networksº. The ONT-30 is a compact and light-weight mainframe with two module slots dedicated to optical test applications. Two different typesof Optical Spectrum Analyzer (OSA) and one optical Q-Factor meter module are offered at introduction. Covering the C, L and S-bands, the OSA modules offer unrivalled speed and unique dual port OSA functionality. The Q-factor module is the first field-based solution for installation and maintenance providing in-service measurement of signal quality independent to line rates and data formats. The test results are displayed on a large 12.1@ TFT color touchscreen. Compact and lightweight and weighing in at less than 10 kg (22 lb) with OSA module, the ONT-30 is ideal for field use during installation, maintenance and troubleshooting. The ONT has a familiar, intuitive user interface based on a web browser. Instrument firmware updates can be downloaded directly from internet. A larger ONT-50 platform housing up to four module slots is provided for users who require combinations of OSA and Q-factor testing capability, as well as for multiport applications using two OSA modules or up to four optical Q-meter modules. (For further information, please refer to ONT-50 data sheet). The ONT provides installers and maintenance teams with outstanding performance for improved test productivity, whilst enhanced modular design ensures that the unit is readily field-configurable for the future. Edition 11/2001

2 ONT-30 mainframe The ONT-30 is a two-slot mainframe test solution with field upgradeable modules designed to reduce the network installation time of optical network elements. It can be equipped with optical test modules for Q-factor or DWDM analysis. General specifications Power supply (nominal range of use) AC line voltage to 240 V AC line frequency /60 Hz Safety class to IEC class I Ambient temperature Nominal range of use to +40 C/41 to 104 F Storage and transport range ±20 to +60 C/±4 to 140 F Dimensions (w6h6d) in mm approx in inches approx Weight approx. 8 kg/17.6 lb (includes protective cover without modules) With its multi-port structure and flexible hardware and software architecture design, carriers can rest assured that whatever new technologies come along, the ONT-30 is able to grow with their needs. Instrument operation Interfaces Parallel Port, Serial Port, Universal Serial Bus (for future use), PCMCIA port, Floppy disk drive, Ethernet (RJ-45), VGA connector Result Storage Recorded traces, tables and results can be stored on Hard Disk (45 GB) or to a floppy disk. Data is stored for review at a later time or report documentation. Screen copy print Printing of screen picture via the ONT-30 parallel port. World Wide Web With the built-in Browser you have access to the Internet. Touch-Screen Display Color TFT screen @, colors Resolution pixels (SVGA standard) The Touchscreen allows very easy point and shoot operation. Remote operation Via Ethernet/LAN Mainframe ± 2 slots free for configuration ± Floppy disk drive ± PCMCIA port ± Universal serial bus (for printing) ± Parallel port, serial port ± Ethernet (RJ-45) ± VGA connector OQM-200 (Optical Q-factor Module) ± Ultra fast Q measurement (560 s) ± Corresponding BER range 10 ±4 to 10 ±40 ± Covering data rates: 2.5 Gbit/s, 10 Gbit/s, FEC (in preparation) ± Suitable for in-service measurements Requires 1 slot OSA-160/OSA-200 (DWDM Analyzer Modules) ± First dual-port optical spectrum analyzer ± Full spectrum WDM analysis in real-time ± Online wavelength calibration ± Auto PASS/FAIL functions ± Monitor output for further channel analysis Requires 2 slots

3 OSA-160/OSA-200 The OSA-160 and OSA-200 modules are the forerunners to a new family of DWDM spectrum analyzers for the ONT platform. As the first dual-port DWDM analyzer, the OSA-200 enables simultaneous measurements at two different points in DWDM systems. Besides the patented dual-port version, a standard single-port (OSA-160) is also available. All of the OSA modules offer high test speed plus internal wavelength calibration which is possible, for the first time ever, without interrupting an ongoing measurement. For use during installation of multichannel DWDM systems in the wavelength range 1280 to 1650 nm, graphical and tabular display formats can be chosen. Built-in test functions allow automatic PASS/FAIL evaluation based on selected limits. Forfurtherqualification of optical signals using bit error tester, afilter function isavailablefor extracting particular signals of interest. Operating modes Graph: WDM spectral mode Full-spectrum graphic display Functions zoom, cursor and marker capabilities Auto Mode (FOX) auto evaluation of DWDM signals with passed/failed indication Averaging Mode Table: WDM system mode Tabular display (scrolling) up to 26 ch (simultaneously) Display parameters wavelength, optical power, OSNR and parameter deviations (statistics) Power measurement ranges Dynamic range (per ch power) ± 65 to +15 dbm Absolute accuracy 1) db Linearity 3) db Readout resolution db Scanning time (1280 to 1650 nm) 4) ms Video update rate s 1) temp. range: 18 to 28 C, wavelength range: 1520 to 1570 nm 2) Within C-band 3) At power levels between ±45 to +10 dbm, within temp. range of +5 to +40 C 4) Scanning time of one input signal Summary: auto evaluation mode Evaluation of DWDM signals against customer selectable limits with indication of passed failed result ChannelDrop Channel dropoutput for furtherchannel signal analysis (bit errors, jitter/wander,pointers, Q-factor,etc.) Wavelengthrange to 1650nm Channel spacing GHz and higher Data rates... up to 2.5 Gbit/s Spectral bandwidth (FWHM) 1)... 70pm +10 pm Insertionloss (Input=4dropoutput) 1)...typ. 12dB Wavelengthstability... Auto frequencycontrol locks onselected carrier frequency Optical ports (physical contact interfaces) Input ports SM/16SM Output port (ch-dropoptional)... 16SM Interface Universal Optical return loss db Max. allowable total power dbm Spectral measurement ranges No. of optical channels Wavelength range to 1650 nm Wavelength accuracy 1) pm Readout resolution nm Resolution bandwidth (FWHM) 1)... 70pm+10 pm Optical rejection ratio 2) at +25 GHz (+0.2nm) (typ. 35) dbc at +50 GHz (+0.4nm) (typ. 45) dbc at +100 GHz (+0.8nm) (typ. 50) dbc

4 OQM-200 The OQM-200 Optical Q-Factor Meter is the first instrument for in-service measurement of signal quality independent of transmitted data format. The Q-Factor Meter can be used for quickly optimizing DWDM systems during installation, maintenance and troubleshooting. The module offers unrivalled test speed with less than 30 seconds required to determine Q factors in the range from 4 to 13 (corresponding to a theoretical bit error rate of 10 ±4 to 10 ±40 ). Unlike a BERT, the Q-Factor Meter can also be used with in-service systems, making the OQM-200 very useful for monitoring purposes. Operating modes Scanning mode single/continuous Optimize real time mode Optical input port Fiber type single-mode Interface universal Optical return loss db Supported data rates Standard rates 2.5 Gbit/s and 10 Gbit/s OC-48/STM-16, OC-192/STM-64 Measurement ranges Wavelength range to 1620 nm Q-Range to 13 corresponding BER range ±4 to 10 ±40 Max. optical input power dbm Dynamic range ±14 to ± 4 dbm Optical power meter (integrated) Power range typ. ±28 to ±3 dbm Measurement time (independent of data-rates) for Q-range 4 to typ. 530 sec (without synchr.)

5 Ordering Information ONT-30 Optical Network Tester BN 2264/01 Compact and portable mainframe with 2 free slots available for configuration with optical modules, browser oriented GUI, Internal browser, color TFT touch screen; Ethernet access; Floppy Disk Drive; VGA; Centronics and PCMCIA Interface; operating manual Hardware modules One must be ordered. A maximum of 2 slots can be fitted. Optical DWDM Analyzers 1280 to 1650 nm Needs 2 slots OSA-160 Opt. DWDM Analyzer single port BN 2264/91.01 OSA-160 Opt.DWDM Analyzer single port withdrop BN 2264/91.02 Allowssingle WDMchannel drop OSA-200 Opt.DWDM Analyzerdual port BN 2264/91.03 With two measurement ports for simultaneous measurement of two fibers Allowssingle WDMchannel drop OQM-200 Opt. Q-Factor Meter 10 G BN 2264/92.01 For fast BER estimation of optical signals at data rates up to 10 Gbit/s Calibration report ONT-30 BN 2264/90.01 Optical measuring adapters 1 FC-PC (IEC 874-7, CECC ) BN 2060/00.51 SC-PC (CECC , IEC ) BN 2060/00.58 ST (IEC , CECC BFO/2.5) BN 2060/00.32 DIN (IEC ) BN 2060/00.50 E-2000 (CECC ) BN 2060/00.53 Accessories 2 Soft carrying case for ONT-30 BN xxxx/xx.xx 3 Carrying case with rolls for ONT-30 (TPK-960/31) BN xxxx/xx.xx 3 External keyboard BN 3035/92.04 Optical attenuators ± SC 3 db, 1310/1550 nm BN 2239/90.34 ± SC 6 db, 1310/1550 nm BN 2239/90.36 ± SC 10 db, 1310/1550 nm BN 2239/90.38 (Requires optical measuring adapter BN 2060/00.58) ± FC 3 db, 1310/1550 nm BN 2239/90.35 ± FC 6 db, 1310/1550 nm BN 2239/90.37 ± FC 10 db, 1310/1550 nm BN 2239/90.30 (Requires optical measuring adapter BN 2060/00.51) Storage case for optical measuring accessories BN 2126/30 (ABK-30) Optical connector cleaning tape BN 2229/ ) Additional optical adapters are available on request. 2) Other accessories on request. 3) Exact ordering information in preparation.

6 OLA-15 Optical Attenuator (variable) BN 2239/01 One application of the OLA-15 is in the line-up of optical links, where line interruptions are simulated for bit error testing. The device is also useful when measuring the sensitivity of optical receivers. With its wide variable attenuation range and highly accurate and reproducible attenuation settings, the OLA-15 is an ideal companion for the ONT. Calibrated at nm and 1550 nm Attenuation range to 60 db Resolution db See OLA-15 data sheet for details. Note: Specifications, terms and conditions are subject to change without prior notice. ã Copyright 2001 Acterna, LLC. All rights reserved. Acterna, The Keepers of Communications, and its logo are trademarks of Acterna, LLC. All other trademarks and registered trademarks are the property of their respective owners. FO/EN/D188/0901/AE repl. D091 Global Headquarters Observation Drive Germantown, Maryland USA Toll Free Tel Fax REG.NO Regional Sales Headquarters North America Observation Drive Germantown, Maryland USA Toll Free Tel Fax Latin America Av. Eng. Luis Carlos Berrini, 936-8/9. Andar S o Paulo, SP Brazil Tel Fax Asia-Pacific 42 Clarendon Street PO Box 141 South Melbourne, Victoria 3205 Australia Tel Fax Western Europe Arbachtalstrasse Eningen u.a. Germany Tel Fax East Europe, Middle East & Africa Elisabethstrasse 36 PO Box Baden Austria Tel Fax st Neopalimovskiy Per. 15/7 (4 th floor) Moscow Russia Tel Fax Acterna is present in more than 80 countries. To find your local sales office, go to