8S648FXP-RZ / 8S648FXP-RZ-C

Transcription

1 / -C Intel Pentium 4 Rev. 00 2MC-S648FXPRZ GIGABYTE TECHNOLOGY CO., LTD GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). GBT,.

2 Mother Board Nov. 3, 2004 Motherboard Nov. 3, 2004

3 (CPU RAM)

4 Layout ( E0) CMOS PCI / Fail-Safe Optimized (Supervisor)/ (User) SETUP SETUP

5 -C Socket 478 Intel Pentium 4 (Northwood, Prescott) HT Intel Pentium 800/533/400MHz FSB 2nd CPU SiS 648FX SiS DDR DIMM 3GB DDR400/DDR333/DDR266 DIMM 2 unbuffered DIMM DDR400 3 unbuffered DIMM DDR V DDR DIMM AGP AGP 8X/4X(.5V) 5 PCI IDE 2 IDE (UDMA 33/ATA 66/ATA 00/ATA 33) 4 IDE SATA 2 Serial ATA SiS 964 (SATA0, SATA) 2 (COMA COMB) 8 USB 2.0/. ( x 4 x 4 - ) PS/2 PS/2 * ICS 883 (0/00 Mbit) * RJ45 * ALC655 codec 2 / 4 / 6 / / SPDIF /SPDIF CD In I/O IT8705 CPU CPU / SATA RAID SiS 964 (SATA0, SATA) striping (RAID 0) mirroring (RAID ) 50MB 2 SATA AWARD EasyTune ATX 2 x 29.5 "*" - 5 -

6 Layout 2 cm CPU_FAN KB_MS COMA LPT Hyper Threading Support ATX COMB SOCKET478 R_USB USB LAN * MIC_IN LINE_OUT LINE_IN F_AUDIO ATX_2V SiS 648FX IDE2 IDE 29.5 cm AGP 8X CODEC ICS883 * AGP PCI DDR DDR2 DDR3 BAT SUR_CEN CD_IN P4 Titan VRM0.0 PCI2 CLR_CMOS SATA PCI3 SiS 964 IT8705 PCI4 SATA0 # -C PCI5 FDD SPDIF_IO IR SYS _FAN F_USB2 F_USB F_PANEL PWR_LED "*" "#" -C - 6 -

7 Pentium 4 Socket 478 CPU CPUCLK+/- (00/33/200 MHz) AGPCLK (66MHz) AGP 4X/8X System Bus 400/533/800 MHz 266/333/400 MHz DDR SiS 648FX ZCLK (66/33MHz) 5 PCI HCLK+/- (00/33MHz) RJ45 * ICS883 * 48 MHz 66/33 MHz 33 MHz 4.38 MHz PCICLK (33MHz) AC97 CODEC MIC AC97 Link LINE-IN LINE-OUT SiS 964 LPC BUS 2 SATA ATA33/66/ 8 USB Ports 00/33 Ports IDE Channels IT MHz 33 MHz Floppy LPT Port PS/2 KB/Mouse 2 COM Ports "*" - 7 -

8 (CPU) HT - HT Intel Pentium 4 - HT - HT - HT (Hyper-Threading Technology) - 8 -

9 - Pentium CPU ( ) pin CPU FAN - 9 -

10 (DIMM) DDR DIMM - 0 -

11 AGP 8X/4X.5V AGP 2X AGP 4X/8X * PS/2 PS/2 PS/2 PS/2 A / B (USB) USB USB USB USB ZIP USB USB "*" - -

12 * 0/00Mbps ) ATX_2V 2) ATX 3) CPU_FAN 4) SYS_FAN 5) FDD 6) IDE / IDE2 7) SATA0 / SATA 8) PWR_LED 9) F_PANEL 0) F_AUDIO ) SPDIF_IO 2) SUR_CEN 3) CD_IN 4) F_USB / F_USB2 5) IR 6) CLR_CMOS 7) BAT "*" - 2 -

13 /2) ATX_2V / ATX (2x2 pin ATX_2V / 2x0 pin ATX) ATX_2V CPU ATX_2V ) ( V 4 +2V V 2 3.3V 3.3V 2-2V 3 4 VCC 3 4 PS_ON(soft on/off) 5 6 VCC Power Good 9 5V SB (stand by +5V) 0 +2V 7 8-5V 9 VCC 20 VCC 3/4) CPU_FAN / SYS_FAN ( ) +2V 3-pin ( CPU_FAN ) +2V (GND) CPU CPU_FAN 2 +2V 3 SYS_FAN - 3 -

14 5) FDD ( ) 360KB 720KB.2MB.44MB 2.88MB ) IDE / IDE2 ( IDE ) IDE IDE IDE IDE IDE ( ) IDE Master Slave ( IDE ) ) SATA0 / SATA (Serial ATA ) Serial ATA 50MB Serial ATA IDE2 IDE 7 SATA 7 SATA0 2 TXP 3 TXN 4 5 RXN 6 RXP 7 Serial ATA RAID

15 8) PWR_LED PWR_LED ON OFF Power LED Suspend MPD+ 2 MPD- 3 MPD- 9) F_PANEL ( ) Message LED/Power/ Sleep LED Power Switch Speaker Connector HD- HD+ RES- RES+ NC MSG- MSG+ SPEAK- PW- PW+ SPEAK+ IDE Hard Disk Active LED Reset Switch MSG (Message LED/Power/Sleep LED) Pin : LED anode(+) Pin 2: LED cathode(-) PW (Power Switch) Open: Normal Operation : Close: Power On/Off : / SPK (Speaker Connector) Pin : VCC(+) +5v Pin 2- Pin 3: NC Pin 4: Data(-) HD (IDE Hard Disk Active LED) Pin : LED anode(+) Pin 2: LED cathode(-) RES (Reset Switch) Open: Normal Operation Close: Reset Hardware System NC - 5 -

16 0) F_AUDIO ( ) Pin5-6 Pin9-0 Jumper MIC 2 3 MIC_BIAS 4 5 Front Audio (R) 6 Rear Audio (R) 7 Reserved 8 9 Front Audio (L) 0 Rear Audio (L) ) SPDIF_IO (SPDIF / ) Sony/Philip Digital Interface Format / SPDIF (AC-3) (SPDIF In) SPDIF SPDIF VCC 2 3 SPDIF 4 SPDIFI

17 2)SUR_CEN ( ) SUR_CEN SUR OUTL 2 SUR OUTR CENTER_OUT 6 BASS_OUT 3) CD_IN ( ) CD-ROM DVD-ROM CD ) F_USB / F_USB2 ( ) USB USB USB Dx- 4 USB Dy- 5 USB Dx+ 6 USB Dy

18 5) IR ( ) VCC ) CLR_CMOS ( CMOS ) -2Pin CMOS Clear CMOS CMOS 7) BAT ( ) CMOS

19 (Basic Input and Output System) CMOS SETUP CMOS SETUP CMOS SRAM CMOS SRAM POST (Power-On Self Test ) <Del> CMOS SETUP "Ctrl + F" Q-Flash TM Q-Flash TM < > <Enter> <Esc> SETUP <Page Up> <Page Down> <F> <F2> <F5> ( ) <F6> Fail-Safe ( ) <F7> Optimized ( ) <F8> Q-Flash <F9> <F0> CMOS SETUP SETUP SETUP <Esc> <F> CMOS SETUP - 9 -

20 CMOS SETUP ( E0) <Enter> CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Top Performance Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F0: Save & Exit Setup Time, Date, Hard Disk Type... "Ctrl + F" Standard CMOS Features ( CMOS ) Advanced Features ( ) Integrated Peripherals ( ) IDE SATA USB IEEE394 COM port LPT port AC97 Power Management Setup ( ) CPU PnP/PCI Configuration ( PCI ) ISA PnP PCI PC Health Status ( ) MB Intelligent Tweaker(M.I.T.) ( / ) CPU Top Performance ( ) "Top Performance" Load Fail-Safe Defaults ( Fail-Safe ) CMOS "Enabled" Load Optimized Defaults ( Optimized ) CMOS Set Supervisor Password ( ) SETUP Set User Password ( ) PC CMOS

21 Save & Exit Setup ( ) SETUP <F0> Exit Without Saving ( SETUP ) CMOS <ESC> Date (mm:dd:yy) ( ) / Time (hh:mm:ss) ( ) / / / 24 (mm) 2 (dd) 28/29/30/3 (yy) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Date (mm:dd:yy) Thu, Oct Time (hh:mm:ss) 22:3:24 IDE Channel 0 Master [None] IDE Channel 0 Slave [None] IDE Channel Master [None] IDE Channel Slave [None] Drive A [.44M, 3.5"] Drive B [None] Floppy 3 Mode Suport [Disabled] Halt On Base Memory Extended Memory Total Memory / / [All, But Keyboard] 640K 27M 28M IDE Channel 0 Master, Slave / IDE Channel Master, Slave [ / ( / )IDE ] IDE HDD Auto-Detection "Enter" IDE Channel 0 Master, Slave / IDE Channel Master, Slave ( / )IDE None IDE None Item Help Menu Level Change the day, month, year <Week> Sun. to Sat. <Month> Jan. to Dec. <Day> to 3 (or maximum allowed in the month) <Year> 999 to 2098 : Move Enter: Select +/-/PU/PD: Value F0: Save ESC: Exit F: General Help F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults Auto POST IDE ( ) Manual Access Mode CHS/LBA/Large/Auto( ) Cylinder Head Precomp Landing Zone Sector Precompensation "None" <Enter> - 2 -

22 Drive A / Drive B ( A:/ B: ) None None 360K, 5.25" KB.2M, 5.25" MB 720K, 3.5" 3 720KB.44M, 3.5" 3.44MB 2.88M, 3.5" MB Floppy 3 Mode Support ( 3 Mode ) Disabled 3 Mode Drive A A: 3 Mode Drive B B: 3 Mode Both A: B: 3 Mode Halt on ( ) POST No Errors All Errors All, But Keyboard ( ) All, But Diskette All, But Disk/Key Memory ( ) POST(Power On Self Test) STANDARD CMOS SETUP Base Memory PC 640KB MS-DOS Extended Memory Base Module Total Memory Other Memory

23 CMOS Setup Utility-Copyright (C) Award Software Advanced Features Hard Disk Boot Priority [Press Enter] Item Help First Boot Device [Floppy] Menu Level Second Boot Device [Hard Disk] Third Boot Device [CDROM] Select Hard Disk Boot Boot Up Floppy Seek [Disabled] Device Priority Password Check [Setup] CPU Hyper-Threading # [Enabled] Limit CPUID Max. to 3 [Enabled] Init Display First [AGP] : Move Enter: Select +/-/PU/PD: Value F0: Save ESC: Exit F: General Help F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults "#" Intel Pentium 4 processor with HT Technology Hard Disk Boot Priority ( ) < > < > <+> <-> <ESC> First / Second / Third Boot Device ( / / ) Floppy LS20 Hard Disk CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled LS20 ZIP USB USB-ZIP USB USB Boot Up Floppy Seek ( ) POST Seek Enabled Seek Disabled Seek ( ) Password Check ( ) System CMOS SETUP Setup CMOS SETUP ( ) SETUP <Enter>

24 CPU Hyper-Threading # Enabled CPU Hyper Threading ( ) Disabled Limit CPUID Max. to 3 Enabled ( NT4.0) ( ) Disabled Init Display First ( ) AGP AGP ( ) PCI PCI CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals IDE Conductor Cable [Auto] Item Help IDE2 Conductor Cable [Auto] Menu Level On-Chip Primary PCI IDE [Enabled] On-Chip Secondary PCI IDE [Enabled] [Auto] AC97 Audio [Enabled] Auto-detect IDE Onboard LAN device * [Enabled] cable type USB Controller [Enabled] USB Legacy Support [Disabled] [ATA66/00/33] SiS Serial ATA Controller [Enabled] Set Conductor cable SiS Serial ATA Mode [RAID] to ATA66/00/33(80 Onboard Serial Port [3F8/IRQ4] Pins) Onboard Serial Port 2 [2F8/IRQ3] Onboard Parallel Port [378/IRQ7] [ATA33] Parallel Port Mode [ECP] Set Conductor cable ECP Mode Use DMA [3] to ATA33(40-Pins) : Move Enter: Select +/-/PU/PD: Value F0: Save ESC: Exit F: General Help F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults IDE Conductor Cable (IDE ) Auto ( ) ATA66/00/33 IDE ATA66/00/33 ( IDE ATA66/00/33 ) ATA33 IDE ATA33( IDE ATA33 ) IDE2 Conductor Cable (IDE 2 ) Auto ( ) ATA66/00/33 IDE2 ATA66/00/33 ( IDE ATA66/00/33 ) ATA33 IDE2 ATA33 ( IDE ATA33 ) "*"

25 On-Chip Primary IDE ( channel PCI IDE ) Enabled channel IDE ( ) Disabled On-Chip Secondary IDE ( channel IDE ) Enabled channel PCI IDE ( ) Disabled AC97 Audio ( AC97 ) Enabled AC97 ( ) Disabled AC97 Onboard LAN device ( ) * Disabled Enabled ( ) USB Controller (USB ) Enabled USB ( ) Disabled USB USB Legacy Support ( USB ) Enabled USB Disabled ( ) SiS Serial ATA Controller (Serial ATA ) Enabled SATA ( ) Disabled SATA SiS Serial ATA Mode (Serial ATA ) IDE SATA IDE RAID SATA RAID ( ) Onboard Serial Port ( ) Auto 3F8/IRQ4 COM 3F8 /IRQ4 ( ) 2F8/IRQ3 COM 2 2F8 /IRQ3 3E8/IRQ4 COM 3 3E8 /IRQ4 2E8/IRQ3 COM 4 2E8 /IRQ3 Disabled Onboard Serial Port 2 ( 2) Auto 3F8/IRQ4 2 COM 3F8 /IRQ4 2F8/IRQ3 2 COM 2 2F8 /IRQ3 ( ) 3E8/IRQ4 2 COM 3 3E8 /IRQ4 2E8/IRQ3 2 COM 4 2E8 /IRQ3 Disabled 2 Onboard Parallel port ( ) Disabled 378/IRQ7 378/IRQ7 ( ) 278/IRQ5 278/IRQ5 3BC/IRQ7 3BC/IRQ7 "*"

26 Parallel Mode ( ) SPP EPP EPP (Enhanced Parallel Port) ECP ECP (Extended Capabilities Port) ( ) ECP+EPP EPP ECP ECP Mode Use DMA 3 ECP Mode use DMA 3 ( ) ECP Mode use DMA CMOS Setup Utility-Copyright (C) Award Software Power Management Setup ACPI Suspend Type [S(POS)] Item Help Soft-Off by PWR_BTTN [Off] Menu Level System After AC Back [Off] IRQ [3-7, 9-5], NMI [Enabled] [S] ModemRingOn [Enabled] Set suspend type to PME Event Wake Up [Enabled] Power On Suspend under Power On by Keyboard [Disabled] ACPI OS Power On by Mouse [Disabled] Resume by Alarm [Disabled] x Month Alarm NA x Day (of Month) Everyday x Time (hh:mm:ss) 0 : 0 : 0 Power LED in S state [Blinking] [S3] Set suspend type to Suspend to RAM under ACPI OS : Move Enter: Select +/-/PU/PD: Value F0: Save ESC: Exit F: General Help F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults ACPI Suspend Type ( ) S(POS) ACPI S/POS (Power On Suspend) ( ) S3(STR) ACPI S3/STR (Suspend To RAM) Soft-Off by PWR_BTTN ( ) Off Soft-Off ( ) Suspend Soft-Off System After AC Back ( ) Laststate Off ( ) On IRQ [3-7, 9-5], NMI Disabled Enabled ( )

27 ModemRingOn ( ) Disabled Enabled ( ) PME Event Wake Up ( ) Disabled Enabled ( ) Power On by Keyboard ( ) Any Key Password -8 Disabled ( ) Power On by Mouse ( ) Disabled ( ) Enabled Resume by Alarm ( ) Enabled Disabled ( ) Enabled Month Alarm : NA, ~2 Day (of Month) : Everyday, ~3 Time (hh: mm: ss) : (0~23) : (0~59) : (0~59) Power LED in S state Blinking Power LED S ( ) Dual/OFF a. power LED LED b. power LED LED

28 PCI CMOS Setup Utility-Copyright (C) Award Software PnP/PCI Configurations PCI 4 IRQ Assignment [Auto] Item Help PCI /5 IRQ Assignment [Auto] Menu Level PCI 2 IRQ Assignment [Auto] PCI 3 IRQ Assignment [Auto] Device(s) using this INT: Display Cntrlr - Bus Dev 0 Func 0 : Move Enter: Select +/-/PU/PD: Value F0: Save ESC: Exit F: General Help F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults PCI 4 IRQ Assignment Auto ( ) 3,4,5,7,9,0,,2,4,5 PCI 4 IRQ 3,4,5,7,9,0,,2,4,5 PCI /PCI 5 IRQ Assignment Auto ( ) 3,4,5,7,9,0,,2,4,5 PCI /5 IRQ 3,4,5,7,9,0,,2,4,5 PCI 2 IRQ Assignment Auto ( ) 3,4,5,7,9,0,,2,4,5 PCI 2 IRQ 3,4,5,7,9,0,,2,4,5 PCI 3 IRQ Assignment Auto ( ) 3,4,5,7,9,0,,2,4,5 PCI 3 IRQ 3,4,5,7,9,0,,2,4,5-28 -

29 CMOS Setup Utility-Copyright (C) Award Software PC Health Status Vcore OK DDR2.5V OK +3.3V OK +2V OK Current CPU Temperature 4 C Current CPU FAN Speed 4440 RPM Current SYSTEM FAN Speed 0 RPM Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F0: Save ESC: Exit F: General Help F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults Current Voltage(V) Vcore / DDR2.5V / +3.3V / +2V Current CPU Temperature CPU Current CPU/SYSTEM FAN Speed (RPM) CPU/

30 / CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Configure DRAM Timing [Auto] x CAS Latency Setting 2.5T x DRAM RAS Active Time 9T x DRAM RAS Precharge Time 5T x DRAM RAS to CAS Delay 5T CPU Clock Ratio [2X] Linear Frequency Control [Disabled] x CPU Clock (MHz) 33 x DRAM Clock (MHz) AUTO AGP/PCI Clock Control [AUTO] x AGP Clock (MHz) 66 x PCI Clock (MHz) 33 DRAM Voltage Control [Normal] Item Help Menu Level [AUTO] Configure DRAM Timing automatically [Manual] Configure DRAM Timing by manual Warning: Wrong DRAM Timing may make system can't boot. Clear CMOS to overcome wrong Timing issue. : Move Enter: Select +/-/PU/PD: Value F0: Save ESC: Exit F: General Help F5: Previous Values F6: Fail-Save Defaults F7: Optimized Defaults Configure DRAM Timing Auto DRAM Timing ( ) Manual DRAM Timing CAS Latency Setting CAS Latency 2T, 2.5T, 3T Auto ( 2.5T) DRAM RAS Active Time DRAM RAS Active Time 6T, 7T, 5T, 4T, 8T 9T ( 9T) DRAM RAS Precharge Time DRAM RAS Precharge Time 3T, 2T, 4T 5T ( 5T) DRAM RAS to CAS Delay DRAM RAS to CAS Delay Time 3T, 2T, 4T 5T ( 5T) CPU Clock Ratio CPU ( CPU ) Linear Frequency Control Disabled ( ) Enabled CPU Clock 00MHz ~ 355MHz CPU 00MHz 355MHz FSB400 Pentium 4 "CPU Clock" 00MHz FSB533 Pentium 4 "CPU Clock" 33MHz FSB800 Pentium 4 "CPU Clock" 200MHz

31 DRAM Clock (MHz) DDR266 "DRAM Clock(MHz)" Auto 266 DDR333 "DRAM Clock(MHz)" Auto 333 AGP/PCI Clock Control AUTO AGP/PCI Clock Control AUTO ( ) Manual AGP/PCI Clock Control Manual AGP Clock (MHz) PCI Clock (MHz) DRAM Voltage Control (DRAM ) Normal DRAM 2.5V ( ) +0.V DRAM +0.V CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Top Performance Advanced Features Load Fail-Safe Defaults Integrated PeripheralsTop Performance Load Optimized Defaults Power Management Setup Disabled...[ ] Set Supervisor Password PnP/PCI Configurations Enabled...[ ] Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit : Select Item : Move ENTER: Accept F8: Q-Flash F0: Save & Exit Setup ESC: Abort "Top Performance" ( OS) Windows XP Windows NT "Top Performance" "Disabled" Disabled ( ) Enabled - 3 -

32 Fail-Safe CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Top Performance Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password PnP/PCI Configurations Load Fail-Safe Defaults Set (Y/N)? User NPassword PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F0: Save & Exit Setup Load Fail-Safe Defaults <Y> <Enter> Fail-Safe Defaults Safe Defaults Fail- Optimized CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Top Performance Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password PnP/PCI Configurations Load Optimized Defaults Set (Y/N)? User Password N PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F0: Save & Exit Setup Load Optimized Defaults <Y> <Enter> CMOS

33 (Supervisor)/ (User) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup CMOS Setup Utility-Copyright (C) Award Software PnP/PCI Configurations Enter Password: PC Health Status MB Intelligent Tweaker(M.I.T.) 8 Enter Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F0: Save & Exit Setup Change/Set/Disable Password Enter PASSWORD DISABLED Supervisor Supervisor Advanced Features Password Check "Setup" CMOS SETUP Supervisor User User Advanced Features Password Check SYSTEM User Supervisor CMOS SETUP USER Password Supervisor CMOS SETUP

34 SETUP CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Top Performance Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password PnP/PCI Configurations Save to CMOS and EXIT Set (Y/N)? User YPassword PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F0: Save & Exit Setup Save Data to CMOS <Y> <Enter> RTC CMOS Setup Utility <N> <Esc> SETUP CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Quit Without Saving (Y/N)? Set User N Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F0: Save & Exit Setup Abandon all Data <Y> <Enter> Setup Utility <N> <Esc>

35 Revision History Windows XP ( setup.exe ) Xpress Install Xpress Install Install Xpress Windows XP USB2.0 Windows Service Pack \ \ "?" ( USB 2.0 )

36 Revision History SIS AGP Driver SIS AGP USB Patch for WinXP USB Windows XP S3 SIS Mini IDE Driver SiS IDE SiS PCI Lan Driver * SiS RealTek AC97 Audio Driver Realtek AC97 SiS 964 Serial ATA Driver SiS 964 Serial ATA SIS USB 2.0 Driver SiS USB 2.0 "*"

37 - 37 -

38 ( ) 200 ( ) ( ) 3 "SN" SN SN "SN" 5. a. b. c. d. e. f. :00 ~ 9:00 ( ) 4 (02) ~ 8:30 ~ 7:30 ( ) 36 6 (02) ~ 9:00 ~ 2:00 :00 ~ 5:00 ( ) 25 (03) ext.93 (03) :00 ~ 9:00 ( ) 278 (03) :00 ~ 9:00 ( ) 8 (04) :00 ~ 9:00 ( ) 45 (06) :00 ~ 9:00 ( ) 5- (07)

39 NIPPON GIGA-BYTE CORPORATION +886 (2) (2) GIGA-BYTE SINGAPORE PTE. LTD. ( / ) : G.B.T. INC Railroad St, City of Industry, CA (626) (626) ( / ) G.B.T. TECH. CO., LTD. Unit 3 Avant Business Centre 3 Third Avenue, Denbigh West Bletchley Milton Keynes, MK DR, UK, England ( / ) G.B.T. TECHNOLOGY TRADING GMBH Friedrich-Ebert-Damm Hamburg Deutschland (Sales) (Tech.) (Sales) (Tech.) ( / ) ( / ) GIGA-BYTE TECHNOLOGY B.V NL Tech.Support 0900-GIGABYTE ( ) BE Tech.Support ( / )

40 ( / ) GIGABYTE TECHNOLOGY PTY. LTD. 3/6 Garden Road, Clayton, VIC 368 Australia ( / ) : GIGABYTE TECHNOLOGY FRANCES S.A.R.L. ( / ) : Moscow Representative Office Of Giga-Byte Technology Co., Ltd. ( / ) : Representative Office Of Giga-Byte Technology Co., Ltd. POLAND ( / ) :