GA-8I915G-ZFD Intel Pentium 4 LAG775. Rev MC-I915GZFD-1101

Transcription

1 GA-8I915G-ZFD Intel Pentium 4 LAG775 Rev MC-I915GZFD-1101

2 2005 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.

3 GA-8I915G-ZFD ( FB) Standard CMOS Features ( CMOS ) Advanced Features ( ) Integrated Peripherals ( ) Power Management Setup ( ) PnP/PCI Configurations ( PCI ) PC Health Status ( ) MB Intelligent Tweaker(M.I.T.) ( / ) Load Fail-Safe Defaults ( Fail-Safe ) Load Optimized Defaults ( Optimized ) Set Supervisor/User Password ( / ) Save & Exit Setup ( SETUP ) Exit Without Saving ( SETUP )

4 Xpress Recovery / 4 / 5.1 /

5 GA-8I915G-ZFD F_USB1 F_USB2 ATX_12V F_PANEL PWR_LED CPU_FAN F1_1394 LGA775 PCI1 Intel 915G ATX GA-8I915G-ZFD ICH6 IDE DDR1 DDR2 PCIE_16 TSB43AB23 RTL8110S S_ATA1 S_ATA0 IT8712 BAT CLR_CMOS CD_IN SYS_FAN SPDIF_IN CODEC AZALIA_FP KB_MS 1394 USB LAN USB VGA LPT COMA AUDIO - 5 -

6 PCI-ECLK (100MHz) VGA LGA775 Processor CPUCLK+/-(200/133MHz) Host Interface DDR400/333MHz DIMM PCI Express x16 Intel 915G GMCH Dual Channel Memory GMCHCLK (200/133MHz) 66MHz 33MHz MHz 48MHz 2 Serial ATA PCI Bus RTL 8110S TSB43AB23 Intel ICH6 IT 8712 ATA33/66/100 IDE Channels LPT Port COM Port PCICLK (33MHz) 1 PCI RJ45 3 IEEE1394 CODEC Back Surround Speaker Out Center/Subwoofer Speaker Out Surround Speaker Out MIC Line-Out Line-In SPDIF In SPDIF Out 8 USB Ports 24MHz 33MHz PS/2 KB/Mouse - 6 -

7 - 7 -

8 - 8 -

9 (CPU RAM)

10 1-2 Intel Pentium 4 LGA /533MHz FSB L2 CPU Intel 915G Intel ICH6 2 DDR DIMM 2GB DDR400/333/266 DIMM 2.5V DDR DIMM 1 PCI-Express x 16 1 PCI IDE 1 IDE (UDMA 33/ATA 66/ATA 100) 2 IDE SATA 2 Serial ATA 1 Normal/EPP/ECP 1 VGA 1 (COMA) 8 USB 2.0/1.1 ( x 4 x 4- ) 3 IEEE1394 ( ) 1 1 PS/2 1 PS/2 Realtek 8110S (10/100/1000 Mbit) 1 RJ 45 C-Media 9880 CODEC Jack Sensing 2 / 4 / 5.1 / 7.1 / SPDIF / SPDIF CD I/O IT8712 CPU / CPU / CPU CPU / AWARD EasyTune 5 ( ) (FSB/DDR) (CPU/DDR) Pico BTX 26.7 x 20.8 GA-8I915G-ZFD

11 (CPU) HT Technology) - HT Intel Pentium 4 - HT - HT - HT (Hyper-Threading ( ) ( )

12 DDR DDR DIMM GA-8I915G-ZFD

13 GA-8I915G-ZFD Memory Bus GA-8I915G-ZFD 2 (DIMM) Channel A DDR 1 ( 1) Channel B DDR 2 ( 2) (Dual Channel DDR Technology) 1. DDR 2. DDR ( ) Channel A Channel B DDR Channel ( ) PCI-Express x 16 / PCI Express x

14 1-6 PS/2 IEEE 1394 IEEE 1394 PS/2 PS/2 ( ) ( ) (USB) USB USB / USB USB USB USB Gigabit Ethernet 10/100/1000Mbps A /SPDIF SPDIF SPDIF AC-3 AC-3 (SPDIF In) ( ) / / 2-/4-/5.1-/7.1- GA-8I915G-ZFD

15 ) ATX_12V 2) ATX (Power Connector) 3) CPU_FAN 4) SYS_FAN 5) IDE 6) S_ATA0 / S_ATA1 7) F_PANEL 8) PWR_LED 9) AZALIA_FP 10) CD_IN 11) F_USB1 / F_USB2 12) F1_ ) SPDIF_IN 14) CLR_CMOS 15) BAT

16 1/2) ATX_12V/ATX ( ) ATX_12V CPU ATX_12V! ) ( 300 ATX 24 ATX V 4 +12V V 2 3.3V V V 7 8 Power Good 9 5V SB (stand by +5V) V V( 24 ) V( 24 ) V 14-12V PS_ON(soft On/Off) V 21 +5V 22 +5V 23 +5V( 24 ) 24 ( 24 ) GA-8I915G-ZFD

17 3/4) CPU_FAN / SYS_FAN ( ) +12V 3-pin/4-pin( CPU_FAN ) +12V (GND)! CPU 1 CPU_FAN 1 SYS_FAN V 3 4 ( CPU_FAN ) 5) IDE (IDE ) IDE IDE IDE IDE IDE ( ) IDE Master Slave ( IDE )

18 6) S_ATA0/S_ATA1 (Serial ATA ICH6 ) Serial ATA 150MB Serial ATA TXP 3 TXN 4 5 RXN 6 RXP 7 7) F_PANEL ( ) Speaker Connector SPEAK SPEAK+ Reset Switch Power Switch Message LED/ Power/ Sleep LED PW- PW+ MSG- MSG+ 2 1 NC RES+ RES- HD- HD+ IDE Hard Disk Active LED HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) ( ) Pin 2: LED cathode(-) SPEAK (Speaker Connector) Pin 1: ( ) Pin 2- Pin 3: Pin 4: Data(-) RES (Reset Switch) Open: Normal ( ) Close: Reset Hardware System PW (Power Switch) Open: Normal : ( ) Close: Power On/Off : / MSG(Message LED/Power/Sleep LED) Pin 1: LED anode(+) ( ) Pin 2: LED cathode(-) NC( ) GA-8I915G-ZFD

19 8) PWR_LED PWR_LED ON OFF Power LED Suspend 1 1 MPD+ 2 MPD- 3 MPD- 9) AZALIA_FP ( ) HD(High Definition) AC' HD 2 1 AC'97 1 MIC2_L 2 3 MIC2_R 4 -ACZ_DET 5 Line2_R 6 FSENSE1 7 FAUDIO_JD 8 9 LINE2_L 10 FSENSE2 1 MIC 2 3 MIC 4 N/A 5 Line Out (R) 6 N/A 7 N/A 8 9 Line Out (L) 10 N/A AC97 HD(High Definition) AC'97 Setup Integrated Peripherals Front Panel Type

20 10) CD_IN ( ) CD-ROM DVD-ROM CD 1 1 CD-L CD-R 11) F_ USB1 / F_USB2 ( ) USB USB I/O USB "USB Device Wake up From S3" S USB DX- 4 USB Dy- 5 USB DX+ 6 USB Dy GA-8I915G-ZFD

21 12) F1_1394 (IEEE 1394 ) 1394 IEEE1394 (Insitute of Electrical Eletronics Engineers) IEEE1394 IEEE TPA2+ 2 TPA TPB2+ 6 TPB ) SPDIF_IN

22 14) CLR_CMOS ( CMOS ) CMOS CMOS CMOS 15) BAT ( ) ( CMOS... ) GA-8I915G-ZFD

23 (Basic Input and Output System) CMOS SETUP CMOS SETUP CMOS SRAM CMOS SRAM POST (Power-On Self Test ) <Del> CMOS SETUP "Ctrl + F1" Q-Flash TM Q-Flash TM < > <Enter> <Esc> SETUP <Page Up> <Page Down> <F1> <F2> <F5> ( ) <F6> Fail-Safe ( ) <F7> Optimized ( ) <F8> Q-Flash <F9> <F10> CMOS SETUP SETUP SETUP <F1> CMOS SETUP <Esc>

24 CMOS SETUP ( FB) <Enter> CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... "Load Optimized Defaults" "Ctrl + F1" Standard CMOS Features ( CMOS ) Advanced Features ( ) Integrated Peripherals ( ) IDE SATA USB IEEE1394 COM port LPT port AC97 Power Management Setup ( ) CPU PnP/PCI Configuration ( PCI ) ISA PnP PCI PC Health Status ( ) MB Intelligent Tweaker(M.I.T.) ( / ) CPU Load Fail-Safe Defaults ( Fail-Safe ) CMOS GA-8I915G-ZFD

25 Load Optimized Defaults ( Optimized ) CMOS Set Supervisor Password ( ) SETUP Set User Password ( ) PC Save & Exit Setup ( ) SETUP <F10> Exit Without Saving ( SETUP ) <ESC> CMOS

26 2-1 Standard CMOS Features ( CMOS ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Date (mm:dd:yy) Fri, Apr Time (hh:mm:ss) 16:55:24 Item Help Menu Level IDE Channel 0 Master [None] IDE Channel 0 Slave [None] IDE Channel 2 Master [None] IDE Channel 2 Slave [None] IDE Channel 3 Master [None] IDE Channel 3 Slave [None] Halt On Base Memory Extended Memory Total Memory [All, But Keyboard] 640K 127M 128M Change the day, month, year <Week> Sun. to Sat. <Month> Jan. to Dec. <Day> 1 to 31 (or maximum allowed in the month) <Year> 1999 to 2098 : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) ( ) / Time (hh:mm:ss) ( ) / / / 24 / / (mm) 1 12 (dd) 1 28/29/30/31 (yy) IDE Channel 0 Master, Slave ( / IDE ) IDE HDD Auto-Detection "Enter" IDE Channel 0 Master/Slave / IDE None IDE None Auto POST IDE ( ) Manual Access Mode CHS/ LBA/ Large/ Auto ( Auto) IDE Channel 2/3 Master, Slave ( / IDE ) IDE HDD Auto-Detection "Enter" Extended IDE Drive / IDE None IDE None Auto POST IDE ( ) GA-8I915G-ZFD

27 Access Mode Large/ Auto ( Auto) Capacity Cylinder Head Precomp Landing Zone Sector Precompensation Halt on ( ) POST No Errors All Errors All, But Keyboard ( ) All, But Diskette All, But Disk/Key Memory ( ) POST(Power On Self Test) STANDARD CMOS SETUP Base Memory PC 640KB MS-DOS Extended Memory Base Module Total Memory Other Memory

28 2-2 Advanced Features ( ) CMOS Setup Utility-Copyright (C) Award Software Advanced Features Hard Disk Boot Priority [Press Enter] Item Help First Boot Device [USB-FDD] Menu Level Second Boot Device [Hard Disk] Third Boot Device [CDROM] Select Hard Disk Boot Password Check [Setup] Device Priority # CPU Hyper-Threading [Enabled] Limit CPUID Max. to 3 [Disabled] No-Execute Memory Protect ( ) [Disabled] CPU Enhanced Halt (C1E) ( ) [Disabled] CPU Thermal Monitor 2(TM2) ( ) [Disabled] On-Chip Frame Buffer Size [8MB] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults " # " Intel Pentium 4 HT Hard Disk Boot Priority ( ) < > < > <+> <-> <ESC> First / Second / Third Boot Device ( / / ) LS120 Hard Disk CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled LS120 ZIP USB USB-ZIP USB USB ( ) GA-8I915G-ZFD

29 Password Check ( ) System CMOS SETUP Setup CMOS SETUP ( ) SETUP <Enter> CPU Hyper-Threading ( CPU ) Enabled CPU ( ) Disabled Limit CPUID Max. to 3 Enabled ( NT4.0) Disabled ( ) No-Execute Memory Protect ( ) Enabled No-Execute Memory Protect Disabled ( ) CPU Enhanced Halt (C1E) ( ) Enabled CPU Enhanced Halt (C1E) Disabled ( ) CPU Thermal Monitor 2 (TM2) ( ) Enabled CPU Thermal Monitor(TM2) Disabled ( ) On-Chip Frame Buffer Size 1MB On-chip frame buffer size 1MB 4MB On-chip frame buffer size 4MB 8MB On-chip frame buffer size 8MB ( ) 16MB On-chip frame buffer size 16MB 32MB On-chip frame buffer size 32MB ( )

30 2-3 Integrated Peripherals ( ) CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals On-Chip Primary PCI IDE [Enabled] On-Chip SATA Mode [Auto] x PATA IDE Set to Ch.0 Master/Slave SATA Port 0/2 Set to Ch.2 Master/Slave SATA Port 1/3 Set to Ch.3 Master/Slave USB Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] Azalia Codec [Auto] Front Panel Type [HD Audio] Onboard H/W 1394 [Enabled] Onboard H/W LAN [Enabled] Onboard LAN Boot ROM [Disabled] Onboard Serial Port 1 [3F8/IRQ4] UART Mode Select [Normal] x UR2 Duplex Mode [Half] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals x ECP Mode Use DMA 3 Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults On-Chip Primary PCI IDE ( channel PCI IDE ) Enabled channel IDE ( ) Disabled On-Chip SATA Mode Disabled Auto ( ) Combined On-Chip SATA mode Combined 4 Enhanced On-Chip SATA mode Enhanced 6 Non-Combined On-Chip SATA mode Non-Combined SATA PATA GA-8I915G-ZFD

31 PATA IDE Set to Ch.1 Master/Slave PATA IDE Ch. 1 Master/Slave Ch.0 Master/Slave PATA IDE Ch. 0 Master/Slave ( ) SATA Port 0/2 Set to "On-Chip SATA Mode" "PATA IDE Set to" PATA IDE Ch. 1 Master/Slave Ch. 0 Master/Slave SATA Port 1/3 Set to "On-Chip SATA Mode" "PATA IDE Set to" PATA IDE Ch. 0 Master/Slave Ch. 1 Master/Slave USB Controller USB Controller Enabled USB Controller ( ) Disabled USB Controller USB 2.0 Controller USB 2.0 Controller Enabled USB 2.0 Controller ( ) Disabled USB 2.0 Controller USB Keyboard Support ( USB ) Enabled USB ( USB USB Enabled) Disabled USB ( ) USB Mouse Support ( USB ) Enabled USB ( USB Device USB Enabled) Disabled USB ( ) Azalia Codec Auto Azalia ( ) Disabled Azalia Front Panel Type ( ) HD HD Audio AC'97 AC97 AC97 AC'97 HD Audio HD ( ) Onboard H/W 1394 Enabled IEEE 1394 ( ) Disabled Onboard H/W LAN ( LAN ) Enabled onboard H/W LAN ( ) Disabled onboard H/W LAN

32 Onboard LAN Boot ROM ( ) Enabled Disabled ( ) Onboard Serial Port 1 ( 1) Auto 3F8/IRQ4 1 COM 1 3F8 /IRQ4 ( ) 2F8/IRQ3 1 COM 2 2F8 /IRQ3 3E8/IRQ4 1 COM 3 3E8 /IRQ4 2E8/IRQ3 1 COM 4 2E8 /IRQ3 Disabled 1 UART Mode Select Normal I/O ( ) IrDA I/O IrDA ASKIR I/O ASKIR UR2 Duplex Mode UART Mode Select [Normal] Full IR Half IR ( ) Onboard Parallel port ( ) 378/IRQ7 378/IRQ7 ( ) 278/IRQ5 278/IRQ5 3BC/IRQ7 3BC/IRQ7 Disabled Parallel Port Mode ( ) SPP ( ) EPP EPP (Enhanced Parallel Port) ECP ECP (Extended Capabilities Port) ECP+EPP EPP ECP ECP Mode Use DMA Parallel Port Mode "ECP" "ECP+EPP" 3 ECP Mode use DMA 3 ( ) 1 ECP Mode use DMA 1 GA-8I915G-ZFD

33 2-4 Power Management Setup ( ) CMOS Setup Utility-Copyright (C) Award Software Power Management Setup ACPI Suspend Type [S1(POS)] Item Help Soft-Off by PWR-BTTN [Instant-off] Menu Level PME Event Wake Up [Enabled] Power On by Ring [Enabled] Resume by Alarm [Disabled] x Date (of Month) Alarm Everyday x Time (hh:mm:ss) Alarm 0 : 0 : 0 Power On By Mouse [Disabled] Power On By Keyboard [Disabled] x KB Power ON Password Enter AC Back Function [Soft-Off] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ACPI Suspend Type ( ) S1(POS) ACPI S1/POS (Power On Suspend) ( ) S3(STR) ACPI S3/STR (Suspend To RAM) Soft-off by PWR-BTTN ( ) Instant-off ( ) Delay 4 Sec. 4 PME Event Wake Up +5VSB 1 Disabled Enabled ( ) Power On by Ring ( ) Disabled Enabled ( ) Resume by Alarm ( ) Enabled Disabled ( ) Enabled Day of Month Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)

34 Power On By Mouse ( ) Disabled ( ) Double Click PS/2 Power On By Keyboard ( ) Disabled ( ) Password 1-5 Keyboard 98 Windows 98 KB Power ON Password ( ) "Power On by Keyboard" "Passowrd" Enter 1-5 Enter AC Back Function ( ) Soft-Off ( ) Full-On Memory GA-8I915G-ZFD

35 2-5 PnP/PCI Configurations ( PCI ) CMOS Setup Utility-Copyright (C) Award Software PnP/PCI Configurations PCI 1 IRQ Assignment [Auto] Item Help PCI 2 IRQ Assignment [Auto] Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults PCI 1 IRQ Assignment ( PCI 1 IRQ ) Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI 1 IRQ 3,4,5,7,9,10,11,12,14,15 PCI 2 IRQ Assignment ( PCI 2 IRQ ) Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI 2 IRQ 3,4,5,7,9,10,11,12,14,

36 2-6 PC Health Status ( ) CMOS Setup Utility-Copyright (C) Award Software PC Health Status Vcore OK Item Help DDR25V OK Menu Level +3.3V OK +12V OK Current System Temperature 35 o C Current CPU Temperature 43 o C Current CPU FAN Speed 4687 RPM Current SYSTEM FAN Speed 0 RPM CPU Warning Temperature [Disabled] CPU FAN Fail Warning [Disabled] SYSTEM FAN Fail Warning [Disabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Current Voltage(V) Vcore / DDR25V / +3.3V / +12V ( ) Current System/CPU Temperature ( /CPU ) /CPU Current CPU/SYSTEM FAN Speed (RPM) ( ) CPU/ CPU Warning Temperature (CPU ) Disabled CPU ( ) 60 o C / 140 o F CPU 60 o C / 140 o F 70 o C / 158 o F CPU 70 o C / 158 o F 80 o C / 176 o F CPU 80 o C / 176 o F 90 o C / 194 o F CPU 90 o C / 194 o F CPU/SYSTEM FAN Fail Warning (CPU/ ) Enabled Disabled ( ) GA-8I915G-ZFD

37 2-7 MB Intelligent Tweaker(M.I.T.) ( / ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) CPU Clock Ratio ( ) [16X] Item Help C.I.A. 2 [Disabled] Menu Level CPU Host Clock Control [Disabled] x CPU Host Frequency (Mhz) 200 x PCI Experss Frequency (Mhz) ASYC Memory Frequency For [Auto] Memory Frequency (Mhz) 400 DIMM OverVoltage Control [Normal] FSB OverVoltage Control [Normal] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults CPU Clock Ratio ( ) CPU ( CPU ) C.I.A.2 C.I.A.2 CPU C.I.A.2 CPU Disabled ( ) Cruise C.I.A.2 Cruise CPU CPU (5% 7%) Sports C.I.A.2 Sports CPU CPU (7% 9%) Racing C.I.A.2 Racing CPU CPU (9% 11%) Turbo C.I.A.2 Turbo CPU CPU (15% 17%) Full Thrust C.I.A.2 Full Thrust CPU CPU (17% 19%) ( )

38 CPU Host Clock Control CMOS Disabled CPU Host Clock ( ) Enabled CPU Host Clock CPU Host Frequency (Mhz) "CPU Host Clock Control" Enabled 100MHz ~ 600MHz CPU Host Frequency 100MHz 600MHz FSB533 Pentium 4 "CPU Host Frequency" 133MHz FSB800 Pentium 4 "CPU Host Frequency" 200MHz PCI Experss Frequency (Mhz) ASYC PCI Express ASYC ( ) SYC PCI Express SYC Memory Frequency For CMOS FSB(Front Side Bus) 533MHz 2.5 Memory Frequency = Host clock X Memory Frequency = Host clock X 3 4 Memory Frequency = Host clock X 4 Auto ( ) FSB(Front Side Bus) 800MHz 1.66 Memory Frequency = Host clock X Memory Frequency = Host clock X Memory Frequency = Host clock X 2.66 Auto ( ) Memory Frequency (Mhz) Memory Frequency For DIMM OverVoltage Control (DIMM ) DIMM Normal DIMM ( ) +0.1V DIMM +0.1V +0.2V DIMM +0.2V +0.3V DIMM +0.3V FSB OverVoltage Control (FSB ) Normal FSB ( ) +0.1V FSB +0.1V +0.2V FSB +0.2V +0.3V FSB +0.3V 20 GA-8I915G-ZFD

39 2-8 Load Fail-Safe Defaults ( Fail-Safe ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Load Fail-Safe Defaults Save (Y/N)? & Exit N Setup PC Health Status Exit Without Saving MB Intelligent Tweaker(M.I.T.) ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Load Fail-Safe Defaults <Y> <Enter> Fail- Safe Defaults Fail-Safe Defaults 2-9 Load Optimized Defaults ( Optimized ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Load Optimized Defaults Save (Y/N)? & Exit N Setup PC Health Status Exit Without Saving MB Intelligent Tweaker(M.I.T.) ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Load Optimized Defaults <Y> <Enter> CMOS

40 2-10 Set Supervisor/User Password ( / ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Enter Password: Save & Exit Setup PC Health Status Exit Without Saving MB Intelligent Tweaker(M.I.T.) ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Change/Set/Disable Password 8 Enter Enter PASSWORD DISABLED Supervisor Supervisor Advanced Features Password Check "Setup" CMOS SETUP Supervisor User User Advanced Features Password Check SYSTEM User Supervisor CMOS SETUP USER Password Supervisor CMOS SETUP GA-8I915G-ZFD

41 2-11 Save & Exit Setup ( SETUP ) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Save to CMOS and EXIT Exit (Y/N)? Without Y Saving ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Save Data to CMOS <Y> <Enter> RTC CMOS Setup Utility <N> <Esc> 2-12 Exit Without Saving ( SETUP ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Quit Without Saving (Y/N)? Save & NExit Setup PC Health Status Exit Without Saving MB Intelligent Tweaker(M.I.T.) ESC: Quit : Select Item F8: Q-Flash F10: Save & Exit Setup Abandon all Data <Y> <Enter> Setup Utility <N> <Esc>

42 GA-8I915G-ZFD

43 Windows XP ( Run.exe ) 3-1 Xpress Install Xpress Install Install Xpress Install Xpress Install Windows XP USB2.0 Windows Service Pack \ \ "?" ( USB 2.0 )

44 3-2 Install 3-3 GA-8I915G-ZFD

45

46 GA-8I915G-ZFD

47 4-1 ( ) U-PLUS D.P.S. (Universal Plus Dual Power System) U-Plus Dual Power System Intel LGA775 Pentium 4 CPU CPU 4 LED M.I.T. (Motherboard Intelligent Tweaker) M.I.T. M.I.T. C.I.A.2 M.I.B.2 M.I.T. C.I.A.2 (CPU Intelligent Accelerator 2) C.I.A.2 CPU C.I.A.2 CPU CPU M.I.B.2 (Memory Intelligent Booster 2) M.I.B.2 10% S.O.S. (System Overclock Saver) S.O.S. S.O.S. CMOS Download Center Download Center Download Center C.O.M. (Corporate Online Management) C.O.M. MIS MIS C.O.M. ( CPU ) )

48 4-1-1 Xpress Recovery Xpress Recovery? 1. FAT16 FAT32 NTFS 2. IDE1 Master HPA IDE 5. (Partition) (Partition) 6. Ghost NTFS Xpress Recovery Xpress Recovery 1. CD-ROM ( : ) "Advanced Feature" CD-ROM "Boot from CD:" Xpress Rcovery CD-ROM Xpress Recovery F9.. Verifying DMI Pool Data Boot from CD: Boot from CD: Xpress Recovery V1.0 (C) Copy Right GIGABYTE Technology CO., Ltd. 1. Execute Backup Utility 2. Execute Restore Utility 3. Remove Backup Image 4. Set Password 5. Exit and Restart Build 2011 GA-8I915G-ZFD

49 2. (POST) F9 ( : ) Award Modular v6.00pg, An Energy Star Al ly Copyright (C) , Award Software, Inc. Intel 865PE AGPSet for 8IPE1000MT F1 Check System Health OK... Press DEL to enter SETUP / Q-Flash, F9 For Xpress Recovery 08/16/2002-I845GE-6A69YG01C-00 F9 For Xpress Recovery Xpress Recovery V1.0 (C) Copy Right GIGABYTE Technology CO., Ltd. 1. Execute Backup Utility 2. Execute Restore Utility 3. Remove Backup Image 4. Set Password 5. Exit and Restart 1. CD-ROM Xpress Recovery F Xpress Recovery

50 1.Execute Backup Utility: Press B to Backup your System or Esc to Exit " (POST) F9" " CD-ROM " 2.Execute Restore Utility: This program will recover your system to factory default. Press R to restore your system back to factory default or press Esc to exit 3.Remove Backup Image: Remove backup image. Are you sure? (Y/N) 4.Set Password: Please input a 4-16 character long password (a-z or 0-9) or press Esc to exit Xpress Recovery Xpress Recovery Set Password New Password Confirm Password Enter 5. Exit and Restart: GA-8I915G-ZFD

51 4-1-2 Q-Flash TM Q-Flash TM Q-FlashTM DOS Windows Q-Flash TM Q-Flash TM Q-Flash TM Q-Flash TM (.Fxx 8KNXPU.Fba) 3. Del Q-Flash TM F1 F12 F1 F4 F4 F8 Q-Flash TM Q-Flash Dual Q-Flash Ultra Q-Flash Fa3 Fba GA-8KNXP Fa3 Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. Intel i875p AGPset for 8KNXP Ultra Fa3 Check System Health OK, VCore = Main Processor : Intel Pentium(R) 4 1.6GHz (133x12) <CPUID : 0F27 Patch ID : 0027> Memory Testing : K OK Memory Frequency 266 MHz in Single Channel Primary Master : FUJITSU MPE3170AT ED Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Dual / Q-Flash / F9 For Xpress Recovery 08/07/2003-i875P-6A79BG03C

52 Q-Flash TM 1 Del Q-Flash CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Select Language Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... 2 F8 Y Dual /Q-Flash Dual /Q-Flash Dual /Q-Flash Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF004A Backup ROM Type/Size...SST 49LF004A 512K 512K Q-Flash Wide Range Protection Disable Boot From Main Bios Auto Recovery Enable Halt On Error Disable Copy Main ROM Data to Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Q-Flash ROM Enter Q-Flash Enter Dual /Q-Flash GA-8I915G-ZFD

53 Q-Flash Q-Flash " " 1. "Load Main from Floppy" Enter to Floppy" "Save Main 2. Enter 8KNXPU.Fba Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF004A Backup ROM Type/Size...SST 49LF004A 512K 512K Wide Range Protection Disable Boot From 1 file(s) Main foundbios 8KNXPU.Fba 512K Auto Recovery Enable Halt On Error Disable Total size Copy : 1.39M Main ROM Data Free to Backup size : K F5 : Refresh Load Default Settings DEL : Delete Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Enter Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF004A Backup ROM Type/Size...SST 49LF004A 512K 512K Wide Range Protection Disable Boot From Main Bios Reading file from floppy... Auto Recovery Enable >>>>>>>>>>>>>>... Halt On Error Disable Copy Main ROM Data to Backup Don't Turn Off Power or Reset System Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off " "

54 3. Y 4. Q-Flash Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF004A Backup ROM Type/Size...SST 49LF004A 512K 512K 5. Esc Y Q-Flash Wide Range Protection Disable Boot From Main Bios!! Auto Copy Recovery completed Enable - Pass!! Halt On Error Disable Copy Please Main press ROM any Data key to continue Backup Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off (Backup ) 1 ~ 4 Dual Utility Boot From... Main Bios Main ROM Type/Size...SST 49LF004A Backup ROM Type/Size...SST 49LF004A 512K 512K Wide Range Protection Disable Boot From Main Bios Auto Are Recovery you sure Enable to RESET? Halt On Error Disable [Enter] Copy to Main continure ROM Data or [Esc] to Backup to abort... Load Default Settings Save Settings to CMOS Q-Flash Utility Load Main from Floppy Load Backup from Floppy Save Main to Floppy Save Backup to Floppy Enter : Run :Move ESC:Reset F10:Power Off Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. Fba Intel i875p AGPset for 8KNXP Ultra Fba Check System Health OK, VCore = Main Processor : Intel Pentium(R) 4 1.6GHz (133x12) <CPUID : 0F27 Patch ID : 0027> Memory Testing : K OK Memory Frequency 266 MHz in Single Channel Primary Master : FUJITSU MPE3170AT ED Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Dual / Q-Flash / F9 For Xpress Recovery 09/23/2003-i875P-6A79BG03C-00 GA-8I915G-ZFD

55 6. Del Load Fail-Safe Defaults Enter CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Select Language Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Load Fail-Safe Defaults (Y/N)? Set Supervisor Y Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type Save & Exit Setup CMOS Y CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Select Language Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Save to CMOS and EXIT (Y/N)? Set Supervisor Y Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit F3: Change Language F8: Dual /Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type... Y Q-Flash TM Q-Flash CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Top Performance Advanced Features Load Fail-Safe Defaults Integrated Peripherals Load Optimized Defaults Power Management Setup Set Supervisor Password PnP/PCI Configurations Set User Password PC Health Status Save & Exit Setup MB Intelligent Tweaker(M.I.T.) Exit Without Saving ESC: Quit F3: Change Language F8: Q-Flash F10: Save & Exit Setup Time, Date, Hard Disk Type

56 Q-Flash Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF002A 256K Q-Flash Q-Flash Keep DMI Data Enable Update from Floppy Save to Floppy Enter : Run :Move ESC:Reset F10:Power Off Q-Flash Enter Q-Flash Q-Flash Q-Flash " " 1. "Update from Floppy" Enter Floppy" 8GE800.F4 "Save to 2. Enter Q-Flash Utility V1.30 Flash Type/Size...SST 49LF002A 256K 1 file(s) found 8GE800.F4Keep DMI Data Enable 256K Update from Floppy Total size : 1.39M Save to Free Floppy size : 1.14M Enter F5 : Run : Refresh :Move ESC:Reset DEL : Delete F10:Power Off Q-Flash Utility V1.30 Flash Type/Size...SST 49LF002A 256K Reading Keep file DMI from Data floppy Enable... >>>>>>>>>>>>>>... Update from Floppy Save to Floppy Enter Don't : Run Turn Off :Move Power or Reset ESC:Reset System F10:Power Off " " GA-8I915G-ZFD

57 3. Y Q-Flash Utility V1.30 Flash Type/Size...SST 49LF002A 256K Keep DMI Updating Data Enable Now >>>>>>>>>>>>>>>>>>>... Update from Floppy Save to Floppy Enter Don't : Run Turn Off :Move Power or Reset ESC:Reset System F10:Power Off 4. Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF002A 256K Keep DMI Data Enable!! Copy Update completed from Floppy - Pass!! Save to Floppy Enter : Run Please :Move press any key ESC:Reset to continue F10:Power Off 5. Esc Y Q-Flash Q-Flash Utility V1.30 Flash Type/Size...SST 49LF002A 256K Keep DMI Data Enable Are Update you sure to from RESET Floppy? Save to Floppy [Enter] to continure or [Esc] to abort... Enter : Run :Move ESC:Reset F10:Power Off F4 Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. Intel 845GE AGPSet for 8GE800 F4 Check System Health OK Main Processor : Intel Pentium(R) 4 1.7GHz (100x17.0) <CPUID : 0F0A Patch ID : 0009> Memory Testing : K OK K Shared Memory Primary Master : FUJITSU MPE3170AT ED Primary Slave : None Secondary Master : CREATIVEDVD-RM DVD1242E BC101 Secondary Slave : None Press DEL to enter SETUP / Q-Flash 03/18/2003-I845GE-6A69YG01C Del Load Fail-Safe Defaults Enter

58 @ @ / Install " " "Update New " 1. I. Internet a. "Internet Update" b. "Update New " d. e. II. Internet a. "Internet Update" b. "Update New " c. " "All Files (*.*)" d. ( 8I915G-ZFD.FB) e. GA-8I915G-ZFD

59 III. "Save Current " IV. Flash ROM "About this program" Flash 2. I. I ( ) II. II III. IV. II V. C.O.M.(Corporate Online Management)

60 / 4 / 5.1 / 7.1 " " - " " - " " C-Media CPL "CMI Audio Config" " " " audio configuration " / / / ( 7.1 ) GA-8I915G-ZFD

61 "C-Media 3D Audio Configuration" " " "Audio System Status" "Smart Jack"

62 "C-Media 3D Audio Configuration" " " "Audio System Status" "Smart Jack" GA-8I915G-ZFD

63 / / / 2 3 "C-Media 3D Audio Configuration" " " "Audio System Status" "Smart Jack"

64 / / / 2 3 "C-Media 3D Audio Configuration" " " "Audio System Status" "Smart Jack" GA-8I915G-ZFD

65 Digital I/O : -- (1)For stereo PCM : 5.1 (2)Dolby Digital Live! : 48KHz -- (1)stereo PCM : 48KHz / " " Device Setting "Enable Multiple Streaming" Multiple Streaming "Sound Playback " "Sound Recording " "C-Media Azalia Rear Panel" "Enable Multiple Steaming" "C-Media Azalia Front Panel" Multiple Streaming Multiple Streaming

66 4-2 " " + F1" "Del" "Ctrl / / CMOS CMOS Clear CMOS CMOS CMOS ( ) CMOS ( ) Defaults) Del "Load Fail-Safe Defaults"( Load Optimized Award AMI AMI : * 1 2 ECC 3 64k 4 5 CPU 6 Gate A20 7 CPU 8 9 ROM 10 CMOS 11 AWARD : 1 2 CMOS GA-8I915G-ZFD

67 - 67 -

68 GA-8I915G-ZFD

69 - 69 -

70 ( ) ( ) ( ) 3 "SN" SN SN "SN" 5. a. b. c. d. e. f. 11:00 ~ 9:00 ( ) 14 (02) ~ 8:30 ~ 17:30 ( ) (02) ~ 9:00 ~ 12:00 1:00 ~ 5:00 ( ) 215 (03) ext.1913 (03) :00 ~ 9:00 ( ) 278 (03) :00 ~ 9:00 ( ) 81 (04) :00 ~ 9:00 ( ) 145 (06) :00 ~ 9:00 ( ) 51-1 (07) GA-8I915G-ZFD

71 ( +886 (2) (2) : ~ 09:30~ 08:30 09:00~ 06:00 ) ( / ) ( ): ( ): G.B.T. INC ( / ) G.B.T. Technology Trading GmbH (Sales) (Tech.) (Sales) (Tech.) NIPPON GIGA-BYTE CORPORATION GIGA-BYTE SINGAPORE PTE. LTD. ( / ) G.B.T. TECH. CO., LTD ( / ) GIGA-BYTE TECHNOLOGY B.V NL Tech.Support 0900-GIGABYTE ( ) BE Tech.Support ( / ) ( / )

72 ( / ) Moscow Representative Office Of GIGA-BYTE Technology Co., Ltd. ( / ) : Office of GIGA-BYTE TECHNOLOGY Co., Ltd. in POLAND GIGABYTE TECHNOLOGY PTY. LTD. ( / ) : GIGABYTE TECHNOLOGY FRANCE S.A.R.L. ( / ) : ( / ) : Representative Office Of GIGA-BYTE Technology Co., Ltd. SERBIA & MONTENEGRO ( / ) : Representative Office Of GIGA-BYTE Technology Co., Ltd. CZECH REPUBLIC ( / ) : Representative Office Of GIGA-BYTE Technology Co., Ltd. Romania ( / ) : GA-8I915G-ZFD