GA-G31M-ES2L/ GA-G31M-ES2C LGA775 Intel Core TM / Intel Pentium / Intel Celeron. Rev MC-G31MES2L-2301R

Transcription

1 GA-G31M-ES2L/ GA-G31M-ES2C LGA775 Intel Core TM / Intel Pentium / Intel Celeron Rev MC-G31MES2L-2301R

2 Motherboard GA-G31M-ES2L/GA-G31M-ES2C May 20, 2010 Motherboard GA-G31M-ES2L/ GA-G31M-ES2C May 20, 2010

3 2010 \ \ REV : X.X REV : X.X

4 GA-G31M-ES2L/GA-G31M-ES2C () Standard CMOS Features ( CMOS ) Advanced Features ( ) Integrated Peripherals ( ) Power Management Setup ( ) PnP/PCI Configurations ( PCI ) PC Health Status ( ) MB Intelligent Tweaker(M.I.T.) ( / ) Load Fail-Safe Defaults ( ) Load Optimized Defaults ( ) Set Supervisor/User Password ( / ) Save & Exit Setup ( ) Exit Without Saving ( )

5 ( ) Download Center Xpress Recovery Q-Flash EasyTune (Easy Energy Saver) Q-Share Time Repair / / 4 / 5.1 / (S/PDIF )( )

6 GA-G31M-ES2L GA-G31M-ES2C IDE - 1 SATA - 2 I/O - 1 ( 12CF1-1FD001-7*R) 2 USB 2.0 ( 12CR1-1UB030-5*R) 2 SATA ( 12CF1-2SERPW-0*R) (S/PDIF ) ( 12CR1-1SPOUT-0*R) - 6 -

7 GA-G31M-ES2L/GA-G31M-ES2C KB_MS ATX_12V _FAN LGA775 COMA VGA LPT R_USB USB LAN AUDIO F_AUDIO Intel G31 GA-G31M-ES2L/GA-G31M-ES2C IDE ATX AR8131 AR8132 PCIE_1 PCIE_16 BAT CLR_CMOS B_ M_ DDRII1 DDRII2 PWR_LED F_PANEL IT8718 PCI1 CODEC CD_IN SPDIF_O PCI2 FDD SYS_FAN CI F_USB1F_USB2 Intel ICH7 SATAII0 SATAII3 SATAII2 SATAII1 GA-G31M-ES2L GA-G31M-ES2C - 7 -

8 PCIe CLK (100 MHz) D-Sub LGA775 CLK+/- (333/266/200 MHz) Host Interface DDR2 800/667 MHz Dual Channel Memory Intel G31 PCI Express x16 GMCH CLK (333/266/200 MHz) PCIe CLK (100 MHz) 1 PCI Express x1 x1 LAN RJ45 AR8131 AR8132 PCI Express Bus PCI Bus Intel ICH7 Dual ATA-100/66/33 IDE Channel 4 SATA 3Gb/s 8 USB Ports Floppy CODEC IT8718 LPT Port COM Port 2 PCI PCI CLK (33 MHz) Surround Speaker Out Center/Subwoofer Speaker Out Side Speaker Out MIC Line Out Line In S/PDIF Out PS/2 KB/Mouse GA-G31M-ES2L GA-G31M-ES2C - 8 -

9 1-1 () - 9 -

10 1-2 USB () LGA775 Intel Core TM 2 Extreme / Intel Core TM 2 Quad / Intel Core TM 2 Duo / Intel Pentium / Intel Celeron ( ) L2 (FSB) 1333/1066/800 MHz Intel G31 Intel ICH V DDR2 DIMM 4 GB ( ) DDR2 800/667 MHz ( ) Realtek ALC883/888B High Definition Audio 2 / 4 / 5.1/7.1 ( ) S/PDIF CD AR8131 (10/100/1000 Mbit) AR8132 (10/100 Mbit) 1 PCI Express x16 1 PCI Express x1 2 PCI - 1 IDE ATA-100/66/33 2 IDE - 4 SATA 3Gb/s 4 SATA 3Gb/s ite IT USB 2.0/1.1 (4 4 USB ) GA-G31M-ES2L GA-G31M-ES2C GA-G31M-ES2L/ES2C

11 1 24-pin ATX 1 4-pin ATX 12V 1 1 IDE 4 SATA 3Gb/s S/PDIF 2 USB 2.0/ PS/2 1 PS/ D-Sub 4 USB 2.0/1.1 1 RJ-45 3 ( / / ) I/O ite IT8718 / / ( ) 2 4 Mbit flash AWARD Dual TM PnP 1.0a DMI 2.0 SM 2.4 ACPI 1.0b

12 @ Q-Flash Xpress Rescue Download Center Xpress Install Xpress Recovery2 EasyTune ( ) (Easy Energy Saver) ( ) Time Repair ON/OFF Charge Q-Share Norton Internet Security (OEM ) Microsoft Windows Vista/XP Micro ATX 24.4 x 19.4 ( ) PC 4 GB 4 GB 4 GB ( ) 7.1 HD (High Definition ) ( ) ( ) EasyTune ( ) Intel Core TM 2 Extreme/ Core TM 2 Quad/ Core TM 2 Duo/ Pentium Dual-Core/ Celeron Dual-Core/ Celeron 400 GA-G31M-ES2L/ES2C

13 1-3 () ( ) ( ) () A. LGA775 LGA

14 B. ( ) ( ) ( ) ( ) GA-G31M-ES2L/ES2C

15 1-3-2 ( Intel ) ( ) ( ) ' ' (_FAN)

16 1-4 ( ) DDR2 (Dual Channel Technology) 2 DDR2 (Channel) 0 (Channel 0) DDRII1 ( 1) 1 (Channel 1) DDRII2 ( 2) DDRII1 DDRII2 1. DDR2 2. GA-G31M-ES2L/ES2C

17 1-4-2 DDR2 DDR DDR2 DDR2 DDR2-17 -

18 1-5 PCI Express x16 PCI PCI Express x / PCI Express x16 x16 PCI Express x16 PCI Express GA-G31M-ES2L/ES2C

19 1-6 PS/2 PS/2 PS/2 ( ) ( ) D-Sub 15-pin D-Sub D-Sub USB USB 2.0/1.1 USB USB / USB USB / (RJ-45) (Gigabit Ethernet) 1 GB (1 Gbps) / 1 Gbps 100 Mbps 10 Mbps GA-G31M-ES2L

20 100 Mbps (RJ-45) (Fast Ethernet) 10/ ( ) ( ) ( ) 4/ HD (High Definition ) 2/4/5.1/7.1 GA-G31M-ES2C GA-G31M-ES2L/ES2C

21 ) ATX_12V 2) ATX 3) _FAN 4) SYS_FAN 5) FDD 6) IDE 7) SATAII0 / 1 / 2 / 3 8) PWR_LED 9) BAT 10) F_PANEL 11) F_AUDIO 12) CD_IN 13) SPDIF_O 14) F_USB1 / F_USB2 15) CLR_CMOS 16) CI

22 1/2) ATX_12V / ATX (2x2-pin 12V 2x12-pin ) 12V 12V (500 ) ATX_12V 3 1 ATX_12V V 4 +12V ATX 12 1 ATX V 2 3.3V V V 7 8 Power Good 9 5V SB(stand by +5V) V V ( 2x12-pin ) V ( 2x12-pin ) V 14-12V PS_ON(soft On/Off) V 21 +5V 22 +5V 23 +5V ( 2x12-pin ) 24 ( 2x12-pin ) GA-G31M-ES2L/ES2C

23 3/4) _FAN/SYS_FAN ( ) _FAN 4-pin SYS_FAN 3-pin ( ) _FAN _FAN V / 3 4 SYS_FAN 1 SYS_FAN V 3 5) FDD ( ) 1.44 MB 2.88 MB 360 KB 720 KB 1.2 MB

24 6) IDE (IDE ) IDE IDE ( ) IDE (Master/Slave) ( IDE ) ) SATAII0/1/2/3 (SATA 3Gb/s ) SATA SATA 3Gb/s SATA 1.5Gb/s SATA SATA 7 SATAII SATAII3 SATAII2 SATAII TXP 3 TXN 4 5 RXN 6 RXP 7 SATA SATA L GA-G31M-ES2L/ES2C

25 8) PWR_LED ( ) (S3/S4) (S5) (S1) 1 1 MPD+ 2 MPD- 3 MPD- S0 S1 S3/S4/S5 9) BAT ( ) CMOS ( ) CMOS CMOS ( ) (+) (-) ( )

26 10) F_PANEL ( ) (+/-) SPEAK SPEAK+ PW- PW+ MSG- MSG+ 2 1 NC RES+ RES- HD- HD+ MSG S0 S1 S3/S4/S5 (S3/S4) (S1) (S5) PW ) SPEAK ( Power Management Setup HD RES (Reset) NC GA-G31M-ES2L/ES2C

27 11) F_AUDIO ( ) HD (High Definition ) AC' HD 10 1 MIC2_L MIC2_R 4 -ACZ_DET 5 LINE2_R 6 7 FAUDIO_JD 8 9 LINE2_L 10 AC'97 1 MIC 2 3 MIC 4 5 Line Out (R) Line Out (L) 10 HD AC'97 2/4/5.1/7.1 HD 2/4/5.1/7.1 12) CD_IN ( )

28 13) SPDIF_O (S/PDIF ) S/PDIF (S/PDIF ) SPDIFO 3 ( ) S/PDIF 14) F_USB1/F_USB2 (USB ) USB 2.0/1.1 USB USB USB (5V) 2 (5V) 3 USB DX- 4 USB DY- 5 USB DX+ 6 USB DY x5-pin IEEE 1394 USB USB USB GA-G31M-ES2L/ES2C

29 15) CLR_CMOS ( CMOS ) CMOS ( ) CMOS CMOS CMOS CMOS (Load Optimized Defaults) ( ) 16) CI ( )

30 GA-G31M-ES2L/ES2C

31 (Basic Input and Output System ) CMOS (POST Power-On Self-Test) CMOS POST <Delete> <Ctrl> + <F1> Windows CMOS ( CMOS Load Optimized Defaults CLR_CMOS )

32 2-1 POST Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. G31M-ES2L A <DEL>: Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash 05/08/2009-G31-ICH7-6A99OG0JC-00 <DEL> Setup <Delete> Q-Flash <F9> XpressRecovery2 Xpress Recovery2 Xpress Recovery2 POST <F9> Xpress Recovery2 <F12> Boot Menu Boot Menu < > < > <Enter> <Esc> Boot Menu <End> Q-Flash <End> Q-Flash GA-G31M-ES2L/ES2C

33 2-2 ( GA-G31M-ES2L A02) <Enter> Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from Time, Date, Hard Disk Type... / < > <Enter> <Esc> <Page Up> <Page Down> <F1> <F2> (Item Help) <F5> ( ) <F6> ( ) <F7> ( ) <F8> Q-Flash <F9> <F10> <F11> CMOS <F12> CMOS (General Help) (Item Help) <F1> <Esc> <Ctrl> + <F1> Load Optimized Defaults

34 <F11> <F12> ( ) F11 Save CMOS to CMOS (Profile) (Profile 1-8) ( <SPACE> <Enter> F12 Load CMOS from CMOS <Enter> Standard CMOS Features ( CMOS ) / POST Advanced Features ( ) / Integrated Peripherals ( ) IDE SATA USB Power Management Setup ( ) PnP/PCI Configurations ( PCI ) PnP PCI PC Health Status ( ) MB Intelligent Tweaker(M.I.T.) ( / ) / Load Fail-Safe Defaults ( ) Load Optimized Defaults ( ) Set Supervisor Password ( ) Set User Password ( ) Save & Exit Setup ( ) CMOS <Y> <F10> Exit Without Saving ( ) <Esc> GA-G31M-ES2L/ES2C

35 2-3 Standard CMOS Features ( CMOS ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Date (mm:dd:yy) Fri, May Time (hh:mm:ss) 10:31:24 IDE Channel 0 Master [None] IDE Channel 0 Slave [None] IDE Channel 2 Master [None] IDE Channel 2 Slave [None] IDE Channel 3 Master [None] IDE Channel 3 Slave [None] Drive A [1.44M, 3.5"] Floppy 3 Mode Support [Disabled] Item Help Menu Level Halt On Base Memory Extended Memory Total Memory [All, But Keyboard] 640K 510M 512M : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Date (mm:dd:yy) ( ) ( )/ / / Time (hh:mm:ss) ( ) IDE Channel 0 Master/Slave ( / IDE/SATA ) IDE HDD Auto-Detection <Enter> IDE/SATA IDE Channel 0 Master/Slave IDE/SATA Auto POST IDE/SATA ( ) None IDE/SATA None Manual Access Mode ( ) CHS Access Mode Auto ( )/CHS/LBA/Large IDE Channel 2, 3 Master/Slave ( / IDE/SATA ) IDE Auto-Detection <Enter> IDE/SATA Extended IDE Drive IDE/SATA Auto POST IDE/SATA ( ) None IDE/SATA None Access Mode Large/Auto ( Auto)

36 Capacity Cylinder Head Precomp (Precompensation) Landing Zone Sector ) Drive A ( ) None None 360K, 5.25" 1.2M, 5.25" 720K, 3.5" 1.44M, 3.5" 2.88M, 3.5" Floppy 3 Mode Support ( 3 Mode ) 3 Mode Disabled ( ) Drive A ( A 3 Mode ) Halt On ( ) POST No Errors All Errors All, But Keyboard ( ) All, But Diskette All, But Disk/Key Memory ( ) POST (Power On Self Test) Base Memory PC 640 KB MS-DOS Extended Memory Total Memory ( GA-G31M-ES2L/ES2C

37 2-4 Advanced Features ( ) CMOS Setup Utility-Copyright (C) Award Software Advanced Features Hard Disk Boot Priority [Press Enter] Item Help First Boot Device [Floppy] Menu Level Second Boot Device [Hard Disk] Third Boot Device [CDROM] Password Check [Setup] HDD S.M.A.R.T. Capability [Disabled] Multi-Threading ( ) [Enabled] Limit ID Max. to 3 ( ) [Disabled] No-Execute Memory Protect ( ) [Enabled] Enhanced Halt (C1E) ( ) [Enabled] Thermal Monitor 2(TM2) ( ) [Enabled] EIST Function ( ) [Enabled] Virtualization Technology ( ) [Enabled] Init Display First [PCI] Onboard VGA [Enable If No Ext PEG] On-Chip Frame Buffer Size [8MB+1~2MB for GTT] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Hard Disk Boot Priority ( ) <Enter> < > < > <+>/ <PageUp> <->/<PageDown> <Esc> First / Second / Third Boot Device ( / / ) < > < > <Enter> Floppy LS120 LS120 Hard Disk CDROM ZIP ZIP USB-FDD USB USB-ZIP USB ZIP USB-CDROM USB USB-HDD USB LAN Disabled Password Check ( ) Set Supervisor/ User Password Setup ( ) System ( ) Intel Intel

38 HDD S.M.A.R.T. Capability ( ) S.M.A.R.T. ( Disabled) Multi-Threading ( ) ( ) Intel Enabled ( ) Disabled Limit ID Max. to 3 ( ID ) ( ) ID Windows XP Disabled Windows NT 4.0 Enabled ( Disabled) No-Execute Memory Protect (Intel ) ( ) Intel Execute Disable Bit (buffer overflow) ( Enabled) Enhanced Halt (C1E) (Intel C1E ) ( ) Intel Enhanced Halt (C1E) ( ) ( Enabled) Thermal Monitor 2 (TM2) (Intel TM2 ) ( ) Intel Thermal Monitor 2 (TM2) ( ) ( Enabled) EIST Function (Intel EIST ) ( ) Enhanced Intel Speed Step (EIST) EIST ( Enabled) Virtualization Technology (Intel ) ( ) Intel Virtualization Technology ( ) Intel ( Enabled) Init Display First ( ) PCI PCI Express PCI PCI ( ) Onboard PEG PCI Express ( ) Intel Intel GA-G31M-ES2L/ES2C

39 Onboard VGA ( ) Enable If No Ext PEG PCI Express ( ) Always Enable PCI Express Always Enable On-Chip Frame Buffer Size ( ) Frame Buffer Size MS-DOS 8MB+1~2MB for GTT ( ) 1MB+1~2MB for GTT

40 2-5 Integrated Peripherals ( ) CMOS Setup Utility-Copyright (C) Award Software Integrated Peripherals On-Chip Primary PCI IDE [Enabled] Item Help On-Chip SATA Mode [Auto] Menu Level x PATA IDE Set to Ch.0 Master/Slave SATA Port 0/2 Set to Ch.2 Master/Slave SATA Port 1/3 Set to Ch.3 Master/Slave USB Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] Legacy USB storage detect [Enabled] Azalia Codec [Auto] Onboard H/W LAN [Enabled] SMART LAN [Press Enter] Onboard LAN Boot ROM [Disabled] Onboard Serial Port 1 [3F8/IRQ4] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults On-Chip Primary PCI IDE ( IDE ) IDE ( Enabled) On-Chip SATA Mode ( SATA ) SATA Disabled SATA Auto ( ) SATA Combined Enhanced Combined Enhanced Combined SATA PATA SATA PATA 2 IDE 2 SATA Enhanced SATA SATA Non-Combined SATA PATA IDE PATA IDE Set to ( IDE ) Combined Ch.0 Master/Slave IDE Ch. 0 Master/Slave ( ) Ch.1 Master/Slave IDE Ch. 1 Master/Slave Disabled SATA Non-Combined IDE SATA Port 0/2 Set to ( SATA 0/2 ) PATA IDE Set to PATA IDE Set to Ch. 1 Master/Slave Ch. 0 Master/Slave SATA Port 1/3 Set to ( SATA 1/3 ) PATA IDE Set to PATA IDE Set to Ch. 0 Master/Slave Ch. 1 Master/Slave GA-G31M-ES2L/ES2C

41 USB Controller ( USB ) USB ( Enabled) USB 2.0 Controller ( USB 2.0 ) USB 2.0 ( Enabled) USB Keyboard Support ( USB ) MS-DOS ( Disabled) USB Mouse Support ( USB ) MS-DOS ( Disabled) USB USB Legacy USB storage detect ( USB ) POST USB USB USB ( Enabled) Azalia Codec ( ) Onboard H/W LAN ( ) ( Auto) Disabled ( Enabled) Disabled SMART LAN ( ) CMOS Setup Utility-Copyright (C) Award Software SMART LAN Start detecting at Port... Pair1-2 Status = Open / Length = 0m Pair3-6 Status = Open / Length = 0m Pair4-5 Status = Open / Length = 0m Pair7-8 Status = Open / Length = 0m Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 0m Status Open Length

42 Gigabit hub 10/100 Mbps hub Start detecting at Port... No cable problem is detected on the LAN cable GA-G31M-ES2L-- Start detecting at Port... Pair1-2 Status = Open / Length = 20m Pair3-6 Status = Open / Length = 20m Pair4-5 Status = Open / Length = 20m Pair7-8 Status = Open / Length = 20m GA-G31M-ES2C-- Start detecting at Port... Pair1-2 Status = Open / Length = 20m Pair3-6 Status = Open / Length = 20m Length MS-DOS 10/100 Mbps Windows LAN Boot ROM Gigabit hub 10/100/ 1000 Mbps Status Short Length Pair1-2 Status = Short / Length = 2m Pair Onboard LAN Boot ROM ( ) ( Disabled) Onboard Serial Port 1 ( ) Boot ROM Auto Disabled Auto 3F8/IRQ4 ( ) 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled Onboard Parallel Port ( ) Disabled 378/IRQ7 ( ) 278/IRQ5 3BC/IRQ7 Disabled Parallel Port Mode ( ) SPP ( ) EPP EPP (Enhanced Parallel Port) ECP ECP (Extended Capabilities Port) ECP+EPP EPP ECP GA-G31M-ES2L/ES2C

43 2-6 Power Management Setup ( ) CMOS Setup Utility-Copyright (C) Award Software Power Management Setup ACPI Suspend Type [S3(STR)] Item Help Soft-Off by PWR-BTTN [Instant-Off] Menu Level PME Event Wake Up [Enabled] Power On by Ring [Enabled] Resume by Alarm [Disabled] x Date (of Month) Alarm Everyday x Time (hh:mm:ss) Alarm 0 : 0 : 0 HPET Support ( ) [Enabled] HPET Mode ( ) [32-bit mode] Power On By Mouse [Disabled] Power On By Keyboard [Disabled] x KB Power ON Password Enter AC Back Function [Soft-Off] ErP Support [Disabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ACPI Suspend Type ( ) S1(POS) ACPI S1 (POS Power On Suspend) S1 S3(STR) ACPI S3 (STR Suspend To RAM) S3 S1 ( ) Soft-Off by PWR-BTTN ( ) MS-DOS Instant-Off ( ) Delay 4 Sec. 4 4 PME Event Wake Up ( ) ACPI PCI PCIe / +5VSB 1 ATX ( Enabled) Power On by Ring ( ) ACPI / ( Enabled) ( ) Windows Vista

44 Resume by Alarm ( ) ( Disabled) Date (of Month) Alarm : Everyday ( ) 1~31 ( ) Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) ( ) HPET Support ( ) Windows Vista High Precision Event Timer (HPET ) ( Enabled) HPET Mode ( ) Windows Vista HPET 32-bit Windows Vista 32-bit mode 64-bit Windows Vista 64-bit mode ( 32-bit mode) Power On By Mouse ( ) PS/2 / +5VSB 1 ATX Disabled ( ) Double Click PS/2 Power On By Keyboard ( ) PS/2 / +5VSB 1 ATX Disabled ( ) Password 1~5 Keyboard 98 Windows 98 KB Power ON Password ( ) Power On by Keyboard Password <Enter> 1~5 <Enter> <Enter> <Enter> <Enter> AC Back Function ( ) Soft-Off Full-On Memory ErP Support ( Disabled) ( ) (S5 ) 1 ( ) Windows Vista GA-G31M-ES2L/ES2C

45 2-7 PnP/PCI Configurations ( PCI ) CMOS Setup Utility-Copyright (C) Award Software PnP/PCI Configurations PCI1 IRQ Assignment [Auto] Item Help PCI2 IRQ Assignment [Auto] Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults PCI1 IRQ Assignment ( PCI IRQ ) PCI IRQ Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI IRQ PCI2 IRQ Assignment ( PCI IRQ ) PCI IRQ Auto ( ) 3,4,5,7,9,10,11,12,14,15 PCI IRQ

46 2-8 PC Health Status ( ) CMOS Setup Utility-Copyright (C) Award Software PC Health Status Reset Case Open Status [Disabled] Item Help Case Opened No Menu Level Vcore 1.268V DDR18V 1.840V +3.3V 3.424V +12V V Current Temperature 47 o C Current FAN Speed 3375 RPM Current SYSTEM FAN Speed 0 RPM Warning Temperature [Disabled] FAN Fail Warning [Disabled] SYSTEM FAN Fail Warning [Disabled] Smart FAN Control [Enabled] : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Reset Case Open Status ( ) Disabled ( ) Enabled Case Opened ( ) CI Yes Reset Case Open Status Enabled Current Voltage(V) Vcore / DDR18V / +3.3V / +12V ( ) Current Temperature ( / ) Current /SYSTEM FAN Speed (RPM) ( ) / Warning Temperature ( ) Disabled ( ) 60 o C / 140 o F 70 o C / 158 o F 80 o C / 176 o F 90 o C / 194 o F /SYSTEM FAN Fail Warning (/ ) No ( Disabled) Smart FAN Control ( ) Disabled Enabled EasyTune ( ) GA-G31M-ES2L/ES2C

47 2-9 MB Intelligent Tweaker(M.I.T.) ( / ) CMOS Setup Utility-Copyright (C) Award Software MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster [Auto] Clock Ratio ( ) [12X] Frequency 2.40GHz(200x12) Host Clock Control [Disabled] x Host Frequency (Mhz) 200 PCI Express Frequency (Mhz) [Auto] Performance Enhance [Standard] System Memory Multiplier (SPD) [Auto] Memory Frequency (Mhz) ******** System Voltage Optimized ******** System Voltage Control [Manual] DDR2 OverVoltage Control [Normal] FSB OverVoltage Control [Normal] Voltage Control [Normal] Normal Vcore V Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ( CMOS ) System Voltage Optimized System Voltage Control Auto Robust Graphics Booster ( ) (R.G.B.) Auto Auto ( ) Fast Turbo Clock Ratio ( ) ( ) Frequency ( ) Host Clock Control ( ) 20 CMOS ( Disabled) ( )

48 Host Frequency (Mhz) ( ) Host Clock Control Enabled 100 ~ MHz 700 MHz FSB 800 MHz 200 MHz FSB 1066 MHz 266 MHz FSB 1333 MHz 333 MHz PCI Express Frequency (Mhz) (PCI Express ) PCI Express 90 MHz 150 MHz Auto PCI Express 100 MHz ( Auto) Performance Enhance ( ) Standard ( ) Turbo Extreme System Memory Multiplier (SPD) ( ) FSB Auto SPD ( Auto) Memory Frequency (Mhz) ( ) Host Frequency (Mhz) System Memory Multiplier System Voltage Control ( ) Manual Auto Manual ( ) DDR2 OverVoltage Control ( ) Normal ( ) +0.1V ~ +0.4V 0.1V 0.1V 0.4V GA-G31M-ES2L/ES2C

49 FSB OverVoltage Control ( ) Normal ( ) +0.1V ~ +0.3V 0.1V 0.1V 0.3V Voltage Control ( ) ( Normal ) Normal Vcore ( )

50 2-10 Load Fail-Safe Defaults ( ) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Fail-Safe Defaults Save (Y/N)? & Exit N Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from Load Fail-Safe Defaults <Enter> <Y> 2-11 Load Optimized Defaults ( ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Load Optimized Defaults Save (Y/N)? & Exit N Setup PC Health Status Exit Without Saving MB Intelligent Tweaker(M.I.T.) ESC: Quit : Select Item F11: Save CMOS to F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from Load Optimized Defaults CMOS <Enter> <Y> GA-G31M-ES2L/ES2C

51 2-12 Set Supervisor/User Password ( / ) Standard CMOS Features Advanced Features Integrated Peripherals CMOS Setup Utility-Copyright (C) Award Software Power Management Setup PnP/PCI Configurations Enter Password: PC Health Status MB Intelligent Tweaker(M.I.T.) ESC: Quit : Select Item F11: Save CMOS to F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from Change/Set/Disable Password Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving <Enter> 8 <Enter> Supervisor ( ) Setup Advanced Features System Password Check User ( ) System Advanced Features Password Check <Enter> <Enter> PASSWORD DISABLED

52 2-13 Save & Exit Setup ( ) CMOS Setup Utility-Copyright (C) Award Software Standard CMOS Features Load Fail-Safe Defaults Advanced Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Save to CMOS and EXIT (Y/N)? Set User Y Password PnP/PCI Configurations Save & Exit Setup PC Health Status Exit Without Saving MB Intelligent Tweaker(M.I.T.) ESC: Quit : Select Item F11: Save CMOS to F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from Save Data to CMOS <Enter> <Y> <N> <Esc> 2-14 Exit Without Saving ( ) Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Quit Without Saving (Y/N)? Set User N Password Save & Exit Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from Abandon all Data <Enter> <Y> <N> <Esc> GA-G31M-ES2L/ES2C

53 ( Run.exe) 3-1 Xpress Install Xpress Install Xpress Install Xpress Install ( ) Xpress Install Windows XP USB 2.0 Windows XP Service Pack 1 " \ " "?" ( " ") ( USB 2.0 )

54 ( ) GA-G31M-ES2L/ES2C

55

56 3-6 Download Center Download Center GA-G31M-ES2L/ES2C

57 4-1 Xpress Recovery2 Xpress Recovery2 PATA SATA NTFS FAT32 FAT16 Xpress Recovery2 ( ) Xpress Recovery2 ( 10 GB ) Xpress Recovery2 512 MB VESA Windows XP SP1( ) Windows Vista Xpress Recovery Xpress Recovery2 Xpress Recovery Xpress Recovery2 USB RAID/AHCI Xpress Recovery2 Windows Vista A. Windows Vista ( ) ( ) PATA IDE1/IDE2... SATA port0/port1/ port2... PATA IDE1 SATA port0 PATA IDE1 SATA port0 SATA port1 SATA port0-57 -

58 10 GB ( ) Xpress Recovery2 Xpress Recovery2 B. Xpress Recovery2 1. Xpress Recovery2 Press any key to startup XpressRocovery2 Xpress Recovery2 2. Xpress Recovery2 Xpress Recovery2 POST <F9> C. Xpress Recovery2 (Backup) Xpress Recovery2 BACKUP GA-G31M-ES2L/ES2C

59 D. Xpress Recovery2 (Restore) RESTORE E. Xpress Recovery2 (Remove) Xpress Recovery2 REMOVE F. Xpress Recovery2 REBOOT

60 4-2 Dual TM DOS Q-Flash TM Dual TM (Main ) (Backup ) Q-Flash TM Q-Flash DOS Windows Q-Flash Q-Flash A ( G31MES2L.FA) USB ( USB FAT32/ 16/12 ) 3. POST <End> Q-Flash ( POST <End> Setup <F8> Q-Flash RAID/AHCI IDE/SATA POST <End> Q-Flash ) Award Modular v6.00pg, An Energy Star Ally Copyright (C) , Award Software, Inc. G31M-ES2L A <DEL>: Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash 05/08/2009-G31-ICH7-6A99OG0JC-00 GA-G31M-ES2L/ES2C

61 B. 1. Q-Flash Q-Flash Update from Drive <Enter> Save to Drive FAT32/16/12 RAID/AHCI IDE/SATA POST <End> Q-Flash 2. Floppy A <Enter> Q-Flash Utility v2.08 Flash Type/Size...MXIC 25L K Keep DMI Data Enable Update from Drive Save 0 file(s) found to Drive Enter Floppy : Run A :Move ESC:Reset <Drive> F10:Power Off HDD 0-0 <Drive> Total size : 0 Free size : 0 3. <Enter> to update?" <Enter> /USB "Are you sure Q-Flash Q-Flash Utility v2.08 Flash Type/Size...MXIC 25L K Keep DMI Data Enable!! Copy Update completed from Drive - Pass!! Save to Drive Enter : Run Please :Move press any key ESC:Reset to continue F10:Power Off

62 <Esc> <Enter> Q-Flash POST POST <Delete> Load Optimized Defaults <Enter> Standard CMOS Features Advanced Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) Award Software Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Load Optimized Defaults Save (Y/N)? & Exit Y Setup Exit Without Saving ESC: Quit : Select Item F11: Save CMOS to F8: Q-Flash F10: Save & Exit Setup F12: Load CMOS from Load Optimized Defaults <Y> Save & Exit Setup <Y> CMOS GA-G31M-ES2L/ES2C

63 A Windows 2. ( ) 3. G.O.M.(GIGABYTE Online Management) Update from GIGABYTE 2. Update from 3. Save Current to File 4. Load CMOS default after update C

64 4-3 EasyTune 6 EasyTune TM 6 EasyTune 6 EasyTune 6 Memory Tuner / Easy Mode Advance Mode / Save (.txt ) Load Set Default Graphics ATI NVIDIA Smart C.I.A.2 Smart Fan Advance Mode HW Monitor / (.wav ) EasyTune 6 EasyTune 6 GA-G31M-ES2L/ES2C

65 4-4 (Easy Energy Saver) (Easy Energy Saver) ( ) A. (Meter Mode) 1 / ( ) 2 / ( ) ( ) ( 1) ( ) / ( )

66 B. (Total Mode) ( ) 1 / ( ) 2 / ( ) ( 1) ( ) ( ) ( ) C. (Stealth Mode) ( ) Intel Core TM 2 Extreme/ Core TM 2 Quad/ Core TM 2 Duo/ Pentium Dual-Core/ Celeron Dual-Core/ Celeron 400 Enhanced Halt (C1E) EIST Function Enabled ( ) ( ) 1 ( ) 2 3 ( ) ( ) GA-G31M-ES2L/ES2C

67 4-5 Q-Share Q-Share Q-Share Q-Share Q-Share \ \GIGABYTE\Q-Share.exe Q-Share Connect... Enable Incoming Folder... Disable Incoming Folder... Open Incoming Folder : C:\Q-ShareFolder Change Incoming Folder : ( ) C:\Q-ShareFolder Update Q-Share... About Q-Share... Q-Share Exit... Q-Share ( )

68 4-6 Time Repair Time Repair (Volume Shadow Copy) Windows Vista NTFS PATA SATA Copy / Restore ON OFF SCHEDULE CAPACITY TRIGGER? Time Repair 1 GB 300 MB 64 GA-G31M-ES2L/ES2C

69 5-1 / / 4 / 5.1 / ( ) Retasking 2 / 4 / 5.1 / (High Definition Audio) HD 71 (HD) (DAC) 44.1KHz 48KHz 96KHz 192KHz (Multi-Streaming) / MP3 A. ( Windows Vista ) ( )2 / 4 / 5.1 / / 7.1 /

70 / GA-G31M-ES2L/ES2C

71 B. C. AC'97 AC'97 AC'97 D. ( HD )

72 5-1-2 (S/PDIF )( ) (S/PDIF ) S/PDIF S/PDIF S/PDIF S/PDIF S/PDIF S/PDIF A. (S/PDIF ) SPDIF_O SPDIF_O ( ) GA-G31M-ES2L/ES2C

73 S/PDIF S/PDIF ( ) S/PDIF S/PDIF S/PDIF B. S/PDIF Digital Output ( ) S/PDIF

74 5-1-3 ( ) ( ) GA-G31M-ES2L/ES2C

75 \ \ ) (

76 5-1-4 A. 1. ( ) 2. [ ] 3. [ ] B. GA-G31M-ES2L/ES2C

77 \ \ Q A POST <Delete> <Ctrl> + <F1> Q / A / Q CMOS A Clear CMOS (CLR_CMOS) CLR_CMOS CMOS CMOS CMOS ( ) <Delete> Load Fail-Safe Defaults ( Load Optimized Defaults) ( Save & Exit Setup ) Q A Q A Award 1 2 CMOS

78 5-2-2 _FAN ATX 12V A ( ) GA-G31M-ES2L/ES2C

79 A POST <Delete> Load Fail-Safe Defaults Load Optimized Defaults Save & Exit Setup IDE/SATA IDE/SATA \

80 5-3 RoHS ( Restriction of the use of Certain Hazardous Substances in Electrical and Electronic Equipment, RoHS) WEEE ( Waste Electrical and Electronic Equipment, WEEE) RoHS ( ) RoHS WEEE 2002/96/EC WEEE GA-G31M-ES2L/ES2C

81 ( ) ( ) (China RoHS)

82 1. ( ) SN SN ( 11 ) ( ) a. b. c. d. e (V1.1) f. g. h. i. ( RAM VGA USB ) GA-G31M-ES2L/ES2C

83 ~ 11:00~21:00 11:00~18:00( ) (02) ~ 8:30 ~ 17:30 ( ) (02) ~ 9:00 ~ 12:00 13:00 ~ 17:00 ( ) 215 (03) ~ 11:00~21:00 11:00~18:00( ) 278 (03) ~ 11:00~21:00 11:00~18:00( ) 81 (04) ~ 11:00~21:00 11:00~18:00( ) 173 (06) ~ 11:00~21:00 11:00~18:00( ) 51-1 (07)

84 (2) (2) ~ 09:30~ 08:30 09:30~ 05:30 / ( ) ( ) G.B.T. INC G.B.T. INC. (U.S.A.) x 215 (Soporte de habla hispano) Correo: soporte@gigabyte-usa.com GIGA-BYTE SINGAPORE PTE. LTD ( / ) ~ 09:00~12:00 01:00~06:00 / GIGABYTE TECHNOLOGY (INDIA) LIMITED GIGABYTE TECHNOLOGY PTY. LTD. - G.B.T. TECHNOLOGY TRADING GMBH - G.B.T. TECH. CO., LTD. - GIGA-BYTE TECHNOLOGY B.V. - GIGABYTE TECHNOLOGY FRANCE ( ) GA-G31M-ES2L/ES2C