CompactPCI Pentium M CPU CC9-SAMBA

Transcription

1 Product Information CompactPCI Pentium CPU CC9-SABA Document No Edition Alternatively equipped with the Intel series of (LV) Pentium and ULV Celeron processors and up to 1GB RA, the CC9- SABA is a versatile 4HP/3U (single size Eurocard) CompactPCI CPU board, designed especially for systems which require low power consumption. Available with a variety of processors, starting with the ULV 600Hz Celeron up to the 2.0GHz Pentium Dothan755, the CC9- SABA covers a wide range of industrial applications. The DVI-I video interface allows for attachment of both, advanced (digital) and legacy (analog) flat panel displays and CRT monitors (D-SUB connector optionally). The CC9-SABA is provided with a Gigabit Ethernet controller. An on-board socket accommodates either a CompactFlash memory card or icrodrive, or an 1.8-inch hard disk module (option). The local expansion interface connector may be used to directly attach a mezzanine companion I/O board, which can carry in addition a 2.5-inch hard disk drive. As an option, rear I/O across the J2/P2 connector is available. CC9-SABA - 1 -

2 Feature Summary CC9-SABA Form Factor Processor Chipset emory Video I/O USB I/O Single size CompactPCI style Eurocard (160x100mm 2 ), front panel width 4HP (20.3mm) Designed for Intel Pentium icro FC-BGA 479 processors (0.13 Banias, 0.09 Dothan), maximum junction temperature 100 C CC9-1: 600Hz ULV Celeron, 512KB L2 cache, 7W CC9-2: 1.0GHz ULV Celeron (Dothan 373), 512KB L2 cache, 5W CC9-3: 1.4GHz LV Pentium (Dothan 738), 2B L2 cache, 10W CC9-5: 1.8GHz Pentium (Dothan 745), 2B L2 cache, 21W CC5-6: 2.0GHz Pentium (Dothan 755), 2B L2 cache, 21W Intel i855 chipset consisting of: 82855GE Graphics/emory Controller Hub (GCH) - ontara 82801D I/O Controller Hub (ICH4) Compatible Firmware Hub (FWH) 200-pin SO-DI socket (notebook style module), PC2100/2700 DDR266/333-SDRA, 1GB maximum Analog monitor and digital flat-panel display support by DVI-I connector (front panel), up to 2048x1536 pixel 16 refresh rate (analog), up to 1600 x 1200 pixel 16 (digital), incorporates PanelLink Digital technology (Silicon Image). Front panel option: D-Sub (female HD15) VGA connector available, replaces DVI-I connector Rear I/O option: Analog video across J2/P2 (CCR-RIO rear I/O transition module) All ports over-current protected, data transfer rate of up to 480bps, conforming to USB2.0 USB port 1: Type A connector (front panel) USB port 2: Type A connector (front panel) USB ports 3/5: J2/P2 Rear I/O option (CCR-RIO rear I/O transition module) USB ports 4/6: Expansion interface option (CCA-LABADA/CCB-BOSSANOVA mezzanine companion board) Ethernet I/O Standard 10/100/1000bps Gigabit Ethernet controller 82541ER, accessible via RJ45 jack from the front panel or as an option across J2/P2 with attached CCR-RIO rear I/O transition module Jumbo Frame support up to 16KB Option 82541PI Gigabit Ethernet controller (replaces 82541ER), Virtual LAN support, IEEE 802.1Q VLAN tag insertion and stripping and packet filtering for up to 4096 VLAN tags Option 10/100 Ethernet (secondary LAN port), accessible via expansion connector LCI (LAN Connect Interface ICH4), requires PHY on expansion board (CCB- BOSSANOVA) ezzanine I/O On-board LPC/USB/AC97 Super-I/O, USB and audio expansion interface connector Suitable CCA-LABADA/CCB-BOSSANOVA mezzanine companion boards available On-board LCI (LAN Connect Interface) connector for an additional Ethernet port (suitable mezzanine companion board CCB-BOSSANOVA) IDE/ATA Ultra ATA/100 connector (Secondary IDE), handover to CCA-LABADA/CCB- BOSSANOVA mezzanine expansion board with optional on-board 2.5-inch hard disk drive or external device CompactFlash socket for a CFA ATA memory card or icrodrive (Secondary IDE) Option 1.8-inch on-board hard disk module (Secondary IDE), replaces CompactFlash facility J2/P2 Rear I/O option: Primary IDE accessible from CCR-RIO rear I/O transition module CCR-RIO CompactPCI 32-bit PCI bridge chip PLX PCI 6150 (HB4), 133Bps CPCI master - 2 -

3 Feature Summary CC9-SABA J2/P2 Rear I/O Primary IDE GB Ethernet USB Ports 3, 5 VGA Analog Video Keyboard, ouse CO1 (TTL Level) Suitable rear I/O transition module CCR-RIO available BIOS Drivers (All ajor OS) Phoenix BIOS < Intel graphics drivers < Intel networking drivers Typical Power Requirements Board CC9-1-SABA +3.3V +0.17V/-0.1V +5V +0.25V/-0.15V axpower WinXP Idle axpower WinXP Idle CC9-2-SABA 1.9A 1.9A 1.4A 0.7A CC9-3-SABA CC9-5-SABA CC9-6-SABA Thermal Conditions Environmental Conditions EC Regulations TBF Performance Rating easured with PCark2002 under Windows XP, 512B PC2700 DDR Operating temperature: 0 C C (CPU dependent) Storage temperature: -40 C C, max. gradient 5 C/min Humidity 5%... 95% RH non condensing Altitude -300m m Shock 15g 0.33ms, 6g 6ms Vibration 1g Hz EN55022, EN55024, EN (UL /IEC ) 90 x 10 3 h ~ 10 years 50 C) Board Processor CPU/E Score CC9-1-SABA 600Hz ULV Celeron (Banias) 1986/2645 CC9-2-SABA 1.0GHz ULV Celeron (Dothan 373) 3386/3274 CC9-3-SABA 1.4GHz LV Pentium (Dothan 738) 4745/8489 CC9-5-SABA 1.8GHz Pentium (Dothan 745) 6143/10609 CC9-6-SABA 2.0GHz Pentium (Dothan 755) 6773/11398 subject to changes - 3 -

4 CC9-SABA with CF icrodrive (or CF Flash Card) CC9-SABA with 1.8-Inch HD Option - 4 -

5 CompactFlash Adapter odule for CC9-SABA The CC9-SABA comes with a CompactFlash adapter module, which is suitable to hold a silicon memory CF card or icrodrive hard disk. If the CC9-SABA is accompanied by a mezzanine expansion module such as the CCA- LABADA or CCB-BOSSANOVA, the position of the CompactFlash adapter module changes to the mezzanine card. Optionally an on-board 1.8-inch hard disk module is available. When ordered, it replaces the CompactFlash adapter module (please request for a special solution which allows to use both the CF slot and the 1.8-inch drive simultaneously, see also lower picture on pg. 7). 1.8-Inch on-board Hard Disk odule for CC9-SABA - 5 -

6 CC9-SABA & CCR-RIO CC9-SABA & CCR-RIO - 6 -

7 CCR-RIO CC9-SABA / CCB-BOSSANOVA with front panel CF Card slot & on-board hard disk - 7 -

8 CCA-LABADA mounted on top of the CC9-SABA, with hard disk option CCA-LABADA mounted on bottom of the CC9-SABA - 8 -

9 Top View Assembly Drawing CC9-SABA USB USB Reset G- ETH DVI-I VGA 541 ATA/IDE odule CompactFlash Expansion odule LPC/AC'97 ICH4 CC9-SABA DDR SO-DI 200 EKF 855 GCH Pentium 6150 PCI-Bridge - 9 -

10 Block Diagram CC9-SABA LV Pentium 1.4GHz Pentium 1.8GHz Block Diagram CC9-SABA Video PSB 400Hz DVI Panel Link VGA DVO GCH G/E 266/333Hz DDR-SDRA 512B/1GB PC2100/2700 SO-DI 200 J2 VGA Hublink VGA D-SUB GB ETH Front Panel I/O top/ bottom USB2.0 Opt. 10/100 Ethernet CCB-BOSSANOVA Expansion Board Gigabit Ethernet LCI LAN USB4/6 USB2.0 top/ bottom PCI ICH AC'97 LPC Expansion I/F S-IDE Opt. CCA-LABADA or CCB-BOSSANOVA Expansion Board IDE I/F GCH USB2.0 SIO FWH PCI Bridge VGA P-IDE USB3 USB5 KB/S CO GPIO ETH Opt. CCA-LABADA or CCB-BOSSANOVA Expansion Board CompactPCI CompactPCI J2 J1 C10-CFA CompactFlash ATA Opt. Rear I/O CCR-RIO

11 Front Panel Options DVI/VGA CC9-SABA CC9- SABA CC9- SABA GP USB GP USB IDE E T H D V I PWR/RES Draft - do not scale EKF IDE E T H PWR/RES V G A Front Panel CCA-LABADA, CCB-BOSSANOVA CC9- SABA CCA- LABADA CC9- SABA CCB- BOSSANOVA CC9- SABA CCB- BOSSANOVA GP USB C O GP USB USB GP USB C O B IDE PWR/RES IDE PWR/RES IDE PWR/RES E T H U S B G - E T H F - E T H G - E T H F - E T H D V I A U D I O IN OUT D V I K B / S D V I K B / S K B / S C O A C O A CCA-LABADA (ounting on top of CC9) CCB-1-BOSSANOVA (Top ounting on CC9) CCB-2-BOSSANOVA (Top ounting on CC9)

12 Block Diagram CCA-LABADA CC9- SABA CD2- BEBOP Expansion Connector LPC/AC'97 Top & Bottom P1 FWH2 LPC Reset GPIO Spkr AC'97 USB4/ J-FWH SIO2 (Low Pin Count Super I/O) External Floppy Disk P4/5 P Sheet 1/3 Super I/O FD P6-P9 FAN IN IRDA AUD P11 IDI OUT P3 GPIO LPT Spkr USB6 Rear I/O J2 CO KB S CO1 RS-232E P2 P13 AD 211 SD SER1 TTL CO1 RS-232E SER2 TTL CO2 RS-232E Front Panel I/O AC'97 Sht.3 Reset Game J1 Sht.2 KB/S Block Diagram CCA-LABADA EKF CU odule P16 CU odule J-SER1 AD 211 SD J-SER2 P18 RS

13 Block Diagram CCA-LABADA EKF Sheet 2/3 IDE Storage Options CC9- SABA CD2- BEBOP Expansion Connector S-IDE P21 P22 C10-CFA CompactFlash Bus Switch EN KB/S Super I/O Sheet 1 Top or Bottom +5V +3.3V P10 P23 (ext. IDE) Optional CompactFlash ATA ezzanine Board Optional On-Board 1.8-Inch HD odule P24 (2.5-" HD) Optional On-Board 2.5-Inch Hard Disk Drive J-IDE Game Super I/O Sheet 1 IDE Rear I/O J1 IDE 40/ mm IDE mm Reset P1 Sheet

14 IN AUD OUT LINE IN/ IC IN LINE OUT/ HP OUT P31 IC1/2, LINE IN 5.1 OUT, SPDIF AC '97 Codec TELEPHONY/ AUX IN CD IN P32 P33 ezzanine Connector for C12-AUDIO odule (8HP Front Panel Width) KB S Block Diagram CCA-LABADA EKF Sheet 3/3 AC'97 AUDIO AC'97 Sht.1 Front Panel I/O CO

15 Block Diagram CCB-BOSSANOVA CC9- SABA CD2- BEBOP Expansion Connector LPC/AC'97 Top & Bottom P1 FWH2 LPC Reset GPIO Spkr AC'97 USB4/ J-FWH SIO2 (Low Pin Count Super I/O) External Floppy Disk P4/5 P Sheet 1/3 Super I/O FD P6-P9 FAN IRDA KB S CCB-1 Front Panel P11 P3 IDI GPIO LPT Spkr USB6 Rear I/O J2 CO-A CO-B CO-A RS-232E CO-B RS-232E CCB-2 Front Panel P2 P13 CU odule AD 211 SD SER1 TTL CO-A RS-232E SER2 TTL CO-B RS-232E ETH Front Panel I/O USB4 Reset Game J1 Sht.2 KB/S Block Diagram CCB-BOSSANOVA EKF P16 CU odule J-SER1 AD 211 SD J-SER2 CO2 CCB-2 Front Panel

16 Block Diagram CCB-BOSSANOVA EKF Sheet 2/3 IDE Storage Options CC9- SABA CD2- BEBOP Expansion Connector S-IDE P21 P22 C10-CFA CompactFlash Bus Switch EN KB/S Super I/O Sheet 1 Top or Bottom +5V +3.3V P10 P23 (ext. IDE) Optional CompactFlash ATA ezzanine Board Optional On-Board 1.8-Inch HD odule P24 (2.5-" HD) Optional On-Board 2.5-Inch Hard Disk Drive J-IDE Game Super I/O Sheet 1 IDE Rear I/O J1 IDE 40/ mm IDE mm Reset P1 Sheet

17 CC9- SABA Expansion Connector LCI (LAN) KB S P30 LAN Connect I/F CO-A CO-B Block Diagram CCB-BOSSANOVA EKF Sheet 3/3 Ethernet PLC ETH 10/100bit Ethernet Front Panel I/O Rear I/O Ethernet J1 Sheet

18 Rear Panel CCR-RIO, CCZ-RIO CCR- RIO V G A C O E T H 3 U S B 5 S K B / S CCR-RIO 4/8HP CCZ- RIO CCZ- RIO C O V G A C O D V I C O E T H C O E T H U S B U SB S K B / S S K B / S CCZ-RIO 4/8HP (VGA Video Output) CCZ-RIO 4/8HP (DVI-I Video Output)

19 Block Diagram CCR-RIO Video Block Diagram CCR-RIO VGA CompactPCI J2 GPIO CO TTL Ethernet USB3/5 KB/S IDE AD 211 L 3526 JP-CO CO RS-232E CO ETH USB3 USB5 CC9-SABA Rear I/O P-IDE1 IDE 40 IDE 44 P-IDE2 S KB S +5V P-POW Option 8HP Rear Panel I/O 4HP Rear Panel I/O

20 Block Diagram CCZ-RIO GPIO (J2) GPIO (J1) J1 Floppy Disk I/F RS (CO2) Rear Panel CO2 Optional Flat Cable Floppy 34 Block Diagram CCZ-RIO CC0-CHILLOUT CCA-LABADA CCB-BOSSANOVA Rear I/O Connector CC0-CHILLOUT CCA-LABADA CCB-BOSSANOVA Rear I/O Connector J1 Rear I/O J2 Rear I/O Serial-2 (TTL) RS (CO1) Serial-1 (TTL) USB Speaker Parallel Printer Fan Control, IRDA I/O IDI Game Reset, Key Lock USB (CCB-BOSSANOVA) Ethernet (available with CC0-CHILLOUT and CCB-BOSSANOVA as an option) PS/2 Keyboard/ouse Rear Panel CO1 Optional Flat Cable DVI-I Digital & Analog Video (available with CC0-CHILLOUT as an option) RS (J2) Optional Flat Cable Option 8HP Rear Panel I/O CO2 S 4HP Rear Panel I/O USB USB ETH KB S VGA GPIO (J1) GPIO Connector RS (J2) Optional Flat Cable CO1 IDE/ATA I/F (Secondary IDE) PWR +5V

21 Alias Ordering No. Short Description Ordering Information SABA CC9-1(R)-SABA 3U/4HP CPCI CPU Board, 600Hz ULV Celeron, 512B DDR SDRA, GB Ethernet, DVI-I video, CompactFlash slot SABA CC9-2(R)-SABA Similar to CC9-1-SABA, 1.0GHz ULV Celeron Dothan 373 SABA CC9-3(R)-SABA Similar to CC9-1-SABA, 1.4GHz LV Pentium Dothan 738 SABA CC9-5(R)-SABA Similar to CC9-1-SABA, 1.8GHz Pentium Dothan 745 SABA CC9-6(R)-SABA Similar to CC9-1-SABA, 2.0GHz Pentium Dothan 755 SABA CC9-A(R)-SABA Similar to CC9-1-SABA, VGA video connector SABA CC9-B(R)-SABA Similar to CC9-2-SABA, VGA video connector SABA CC9-C(R)-SABA Similar to CC9-3-SABA, VGA video connector SABA CC9-E(R)-SABA Similar to CC9-5-SABA, VGA video connector SABA CC9-F(R)-SABA Similar to CC9-6-SABA, VGA video connector CC9-H-SABA CC9-Z-SABA Option on-board 1.8-inch hard disk drive module 20GB (replaces CompactFlash slot) Option 1GB DDR SDRA option (replaces 512B memory module) LABADA CCA-1-LABADA 3U Super-I/O module, local expansion board complementing the CC9-SABA, front panel width 4HP, with PS/2 keyboard/mouse, RS-232, optional audio connectors & AC'97 Codec, mounting on top or bottom of the CC9-SABA BOSSANOVA BOSSANOVA CCA-8-HD CCB-1- BOSSANOVA CCB-2- BOSSANOVA CCB-8-HD Optional hard disk drive 2.5-inch, on-board mounting on top of the CCA 3U Super-I/O module, local expansion board complementing the CC9-SABA, front panel width 4HP, 10/100 Ethernet, 2 x USB, 1 x RS-232, PS/2 keyboard/mouse mounting on top or bottom of the CC9-SABA 3U Super-I/O module, local expansion board complementing the CC9-SABA, front panel width 4HP, 10/100 Ethernet, 2 x RS-232, PS/2 keyboard/mouse mounting on top or bottom of the CC9-SABA Optional hard disk drive 2.5-inch, on-board mounting on top of the CCB RIO CCR-1-RIO Rear I/O transition module for CC9-SABA RIO CCZ-A-RIO Rear I/O transition module for CCA-LABADA RIO CCZ-B-RIO Rear I/O transition module for CCB-BOSSANOVA CR9-5-ADAPT echanical kit, expands the CC9 front panel to 6U full height External keyboard/mouse Y-splitter-cable ini-din male to 2 x ini-din female DVI-D to DVI-D cable assembly, 2m, connects the CC9-SABA with DVI-I video connector to DVI monitors (digital way) DVI-I to HD DSUB15 cable assembly, 2m, connects the CC9-SABA with DVI-I video connector to VGA monitors (analog way) DVI-I to VGA adapter (plug to receptacle), to be plugged onto the CC9-SABA DVI output, with HD DSUB15 socket, suitable especially for analog monitors with firmly attached VGA cable P1/P2 single slot rear I/O backplane (required for CCZ-RIO)

22 CC9-*-SABA: suitable for 64-bit CPCI J2/P2 backplane CC9-*R-SABA: suitable for rear I/O across J2 Cool Runnings... with CC9-SABA

23 CC9-SABA w. Custom Specific Front Panel CC9-SABA w. Custom Specific Front Panel & on-board Hard Disk

24 CC9-SABA with CCB-BOSSANOVA ounted on Top EKF Elektronik GmbH Philipp-Reis-Str Hamm Germany Fax. +49 (0)2381/ Tel. +49 (0)2381/ Internet E-ail info@ekf.de