Access control. SiPass readers and cards. Built to stand the test of time. Answers for infrastructure.

Transcription

1 Access control SiPass readers and cards Built to stand the test of time Answers for infrastructure. 3

2 SiPass readers and cards robust, reliable and easy to use Siemens provides a wide range of readers and cards to satisfy the access control requirements of most environments. Our readers and cards can work with virtually any access control system on the market, but they are specifically tested and qualified for use with SiPass systems. Designed for easy installation and use, the SiPass reader portfolio includes technologies ranging from magnetic stripe to 25 khz proximity, multi-purpose smart card technology, and technology, which offers the convenience of hands-free functionality. Each technology type includes at least one model with an integrated keypad to enable cardplus-pin functionality, which is ideal for higher security applications. The majority of SiPass readers supports Siemens advanced reader protocols BC-Link or CerPass/UCI (RS485). The advantages of using these protocols include the ability to connect two readers to a single door controller, which simplifies the installation and reduces costs, and active monitoring of reader status, which enhances security. Whichever type of SiPass readers and cards you choose, you can be confident that they will significantly enhance security at your site(s).

3 Which technology suits your needs? Reading technologies SiPass readers and cards operate via four different types of reading technology: magnetic stripe, 25 khz proximity, and Smart Card. Magnetic stripe The user swipes a magnetic stripe card in the slot on the reader. The advantage of magnetic stripe cards is that they are fairly inexpensive. They are mainly used today when expanding an existing access control system that uses magnetic stripe technology. 25 khz proximity The information stored within a 25 khz proximity card or tag is sent to the reader when the card or tag is held in front of it. This reduces the wear and tear on the cards and readers which results in a lower total cost of ownership over time. Some of our 25 khz proximity readers support the SiPass algorithm, which offers a higher level of security than conventional 25 khz. The main advantage of technology is that it provides both proximity and hands-free card reading. It operates on the 32 khz band, which is similar to 25 khz. All readers can read both active (long-range) and passive (proximity) cards and tags. Both types of cards can be mixed in the same system to provide ultimate convenience and cost-efficiency. active cards contain a battery, which enables these cards to transmit information with a higher output power than passive cards and thereby results in a longer reading distance. When hands-free readers are used together with active cards and tags it is possible to create a truly hands-free access control environment. This is useful in cases where some cardholders are disabled or where hands are often occupied, such as in a hospital or a warehouse. is more secure than standard 25 khz technology because the content on the card is protected and there is no equipment available outside Siemens to read or copy the cards. Smart card Smart cards can be used for additional purposes beyond that of access control. They function as proximity access cards, but since they can store much more information they can also be used as cash cards at company restaurants or vending machines, for example. It is also possible to store biometric data such as fingerprint templates. Smart cards offer the highest degree of security in our card range. Communication protocols SiPass readers communicate with the door controllers in the system either via standard reader protocols such as and Clock&Data, or via Siemens advanced reader protocols, BC-Link and CerPass (RS485). Advantages of BC-Link and CerPass (RS485) protocols: Since they are bi-directional they can be used for buzzer control, LED feedback and arming/disarming of an intrusion area Installation is faster since less wiring is required Higher level of security compared to using or Clock&Data Constant monitoring of reader status Highlights Hands-free access with technology Easy to install and use Robust and reliable Fully tested with SiPass systems Enhanced security with advanced reader protocols

4 Readers PIN-only Magnetic Stripe M43 BC43 AR68-RX SiPass Entro SiPass integrated SIPORT Card technology ne (keypad only) Magstripe (track 2) EM402 (also known as Miro or UNIQUE 25, Hitag and Hitag 2 EM40 as Mir, H and Hi Description PIN-only reader. Used for group codes or to add PIN functionality to an existing card-only reader. Tamper switch. Card and PIN reader. Tamper switch. Card-only reader. Square design. Smart two-part construction makes it very easy to mount. Also includes a surface mounting frame. Card a Square two-pa makes mount surfac frame. Card read distance* 7 cm (approx.) 7 cm ( Interface to controller Operating voltage BC-Link 2 to 24 VDC BC-Link 2 to 24 VDC RS485 monitored CerPass/UCI protocol 2 to 24 VDC RS485 CerPas 2 to 2 Average current consumption Indicators Environment 27 2 VDC green) x buzzer 30 2 VDC green), x buzzer 45 2 VDC x LED (red/yellow/ green), x buzzer 45 m x LED green) Indoor Operating temperature 35 to +50 C 35 to +50 C 25 to +70 C 25 to IP rating Housing Cast metal with stainless steel keys and security lock Cast metal with stainless steel keys and security lock PC/ABS Color Grey Grey Silver (RAL9006) Silver Dimensions (W x H x D) Keypad 80 x 40 x 40 mm Stainless steel keys 0 x 60 x 47 mm Stainless steel keys 85.5 x 9 x 40 mm W/o 9 x 23 mm With m 85.5 x mount 9 x 2 Memb Approval Accessories Compatible cards/tags Order no. SH2 rain cover IS39 spy-proof cover BB3 flush mounting kit ne S24246-F8400-A SH4 rain cover BB4 flush mounting kit IB S24246-F40-A SH universal rain cover SH un ABR500-PR ABR500-BL ABR500-TG 6FL770-8AD ABR5 ABR5 ABR5 6FL7 Cards Magnetic Stripe Pro IB ABR500-PR ABR500-BL ABR500-TG IB4-EM Description Quantity in order Dimensions (W x H x D) Order no. Magnetic stripe card with CR80 ISO format (track 2). Card number 00 S24246-D5000-A Pre-printed ISO cards compliant with Siemens Prox technology. Can be used with the readers ARS63- RX, AR633-CP, AR6332-CP, AR68- RX and AR682-RX. 0 6FL7820-8KA0 Blank, printable ISO cards compliant with Siemens Prox technology. Can be used with the readers ARS63- RX, AR633-CP, AR6332-CP, AR68- RX and AR682-RX. 0 6FL7820-8KA20 Keyring tags compliant with Siemens Prox technology.. Can be used with readers ARS63-RX, AR633-CP, AR6332- CP, AR68-RX and AR682-RX. Card number x x.55 mm 6FL7820-8KA30 Printed ISO cards compliant with EM402 reading technology. Can be used with the readers HD500-EM, PM500-EM, PR500- EM, SP500-EM, PP500-EM. Cards also include magnetic stripe and card number S24246-D4904-A Blank card EM4 tech used HD50 EM, SP50 Card mag card 54 x S242 *All reading distances provided here have been measured in lab conditions and may vary according to environmental conditions.

5 Proximity 25 khz AR682-RX ARS63-RX AR633-CP AR6332-CP PP500-EM HD500-EM PR500-EM SP500-EM 2 (also known o or UNIQUE 25 itag tag 2 EM 402 (also known as Miro or UNIQUE 25 Siemens Prox Siemens Prox EM402 (also known as Miro or UNIQUE 25 EM402 (also known as Miro or UNIQUE 25 EM402 (also known as Miro or UNIQUE 25 EM402 (also known as Miro or UNIQUE 25 E a k nd PIN reader. design. Smart rt construction it very easy to. Also includes e mounting Card-only reader. Compact and economical. Tamper switch. Card-only reader. Mullion design. Smart twopart construction makes it very easy to mount. Tamper switch. Card and PIN reader. Mullion design. Smart two-part construction makes it very easy to mount. Tamper switch. Heavy-duty card and PIN reader. Position indicator light and illuminated keypad make it easy to use in dark places. Tamper switch. Heavy-duty card-only reader. Vandal-proof, impact and fire resistant. Popular both in vulnerable locations and modern office environments. Card-only reader. Slim and compact. Card-only reader. Compact design. Designed for mounting in singlegang back boxes. C D m m l approx.) 2 cm (approx.) 7 cm (approx) 7 cm (approx) 5 cm 6 cm 0 cm 0 cm 5 monitored s/uci protocol Clock&Data and (26/34/42 bit) RS485 monitored CerPass protocol RS485 monitored CerPass protocol B W 4 VDC 0 to 6 VDC 2 VDC 2 VDC 2 to 24 VDC 0.6 to 32 VDC 0.6 to 32 VDC 0.6 to 32 VDC 2 VDC (red/yellow/, x buzzer or outdoor use 32 2 VDC green) x buzzer 35 2 VDC green), x buzzer 35 2 VDC green), x buzzer 2VDC green), x buzzer 20 2 VDC green), x buzzer 2VDC green), x buzzer 2 2 VDC green), x buzzer 2 3 g I +70 C 25 to +60 C 0 to +55 C 0 to +55 C plastic (RAL9006) ounting frame 40 x 00 x 25 mm 9 x 40 mm W/o ing frame 85.5 x 3 mm rane keys iversal rain cover SH universal rain cover 00-PR 00-BL 00-TG 70-8AE ABS plastic Silver (RAL9006) ABR500-PR ABR500-BL ABR500-TG S24246-Z3900-A Silver (RAL9006) 48 x 47 x 30 mm ABR500-PR ABR500-BL ABR500-TG 6FL77-8AD Silver (RAL9006) 48 x 47 x 30 mm SH universal rain cover Membrane keys SH universal rain cover Stainless steel keys SH2 rain cover IS39 spy-proof cover BB3 flush mounting kit IB4-EM, IB42-EM IB44-EM, IB45-EM ABR500-PR, ABR500-BL ABR500-TG 6FL77-8AE Cast metal with stainless steel keys and security lock Polycarbonate case, fully encapsulated electronics with stainless steel frame ABS base with clip on ABS front cover Grey Black and stainless steel White 80 x 40 x 40 mm 00 x 28 x 8 mm 40 x 40 x 8.5 mm S5450-F-A ne IB4-EM, IB42-EM IB44-EM, IB45-EM S24246-F390-A BB6 flush mounting kit IB4-EM, IB42-EM IB44-EM, IB45-EM S24246-F393-A ABS base with fully encapsulated electronics and clip on ABS front cover White 86 x 86 x 4 mm ne IB4-EM, IB42-EM IB44-EM, IB45-EM S24246-F3902-A I H b w e B 6 N C N I I S ximity 25 khz IB42-EM IB44-EM IB45-EM IB928 IB9 IB970 IB968 printable ISO compliant with 02 reading nology. Can be with the readers 0-EM, PM500- PR500-EM, 0-EM, PP500-EM. s also include netic stripe and number 86 x 0.76 mm 46-D490-A Keyring tag with Siemens logo, compliant with EM402 reading technology. Can be used with the readers HD500-EM, PM500-EM, PR500- EM, SP500-EM, PP500-EM. Card number on front x x 7.25 mm S24246-D4902-A Adhesive tag with Siemens logo, compliant with EM402 reading technology. Can to be attached to existing magnetic stripe cards when adding EM402 readers to an existing magstripe installation. Diameter 30 x 3 mm S24246-D4903-A Active clamshell card including lithium battery. Suitable for use with all readers in this brochure. Card number x x 2.89 mm D5203-A Active keyring tag including lithium battery. Suitable for use with all readers in this brochure. Card number 3.24 x x 9.7 mm S24246-D5204-A Active vehicle tag. Suitable for use with BC556- loop reader. Card number x 5.67 x mm S24246-D5200-A Passive shell card. Sui for use with a readers in this chure except. Card n 54 x 85.6 x. S5450-S0-A

6 PM500-EM PP500- HD500- PR500- SP500- PM500- HF500- BC55-Cota M402 (also known s Miro or UNIQUE 25 Hz) ard-only reader. esigned for panel ounting. Suitable for ost remote call-point ocations. Heavy-duty card and PIN reader. Position indicator light and illuminated keypad make it easy to use in dark places. Tamper switch. Heavy-duty card-only reader. Vandal-proof, impact and fire resistant. Popular both in vulnerable locations and modern office environments. Card-only reader. Slim and compact. Card-only reader. Compact design. Designed for mounting in singlegang back boxes. Card-only reader. Designed for panel mounting. Suitable for most remote call-point locations. Hands-free reader. Able to read through wood, concrete, glass, and most other materials, but not metal. Hands-free reader. signed for split-mo applications. Provi higher level of sec particularly for out use. cm C-Link, iegand Active card: 2 cm Passive card: 3 cm Active card: 26 cm Passive card: 8 cm Active card: 32 cm Passive card: 0 cm Active card: 29 cm Passive card: 9 cm Active card: 23 cm Passive card: 8 cm Active card: 02 cm Passive card: 34 cm Clock&Data or Active card: 90 cm Passive card: 35 cm Clock&Data or 0.6 to 32 VDC 2 to 24 VDC 0.6 to 32 VDC 0.6 to 32 VDC 0.6 to 32 VDC 0.6 to 32 VDC 0 to 35 VDC 0 to 35 VDC 2VDC x LED (red/yellow/ reen), x buzzer ndoor or outdoor use 30 to +50 C P55 igh impact polycaronate outer casing, ith encapsulated lectronics lack 8 x 73 x 3.5 mm o 39 2 VDC green), x buzzer Cast metal with stainless steel keys and security lock Grey 80 x 40 x 40 mm Stainless steel keys 37 2 VDC green), x buzzer Polycarbonate case, fully encapsulated electronics with stainless steel frame Black and stainless steel 00 x 28 x 8 mm 36 2 VDC green), x buzzer ABS base with clip on ABS front cover White 40 x 40 x 8.5 mm 32 2 VDC green), x buzzer ABS base with fully encapsulated electronics and clip on ABS front cover White 86 x 86 x 4 mm 2VDC green), x buzzer High impact polycarbonate outer casing, with encapsulated electronics Black 68 x 73 x 3.5 mm VDC green), x buzzer Indoor use only 0 to +50 C UV-resistant ABS plastic Light grey 220 x 265 x 29.3 mm VDC 3 x LED (red/yellow green), x buzzer Indoor for the read interface and outd for the reader 40 to +70 C (HF 0 to +50 C (BC53 (HF00) UV-resistant ABS p Light grey BC53: 0 x 9 40 mm HF00: 220 x mm E one B4-EM, IB42-EM B44-EM, IB45-EM F3903-A SH2 rain cover IS39 spy-proof cover BB3 flush mounting kit IB9, IB928, IB958, IB958M, IB968, IB98 S5450-F-A2 ne IB9, IB928, IB958, IB958M, IB968, IB98 S24246-F4703-A BB6 flush mounting kit IB9, IB928, IB958, IB958M, IB968, IB98 S24246-F4706-A ne IB9, IB928, IB958, IB958M, IB968, IB98 S24246-F4704-A ne IB9, IB928, IB958, IB958M, IB968, IB98 S24246-F4705-A ne IB9, IB928, IB958, IB958M, IB968, IB970, IB98 S24246-F406-A ne IB9, IB928, IB95 IB958M, IB968, IB IB98 S24246-F470-A Smart Card 3.56 MHz Accessories IB98 IB958M ABP500-PR ABP500-BL clamtable ll bro- BC556- umber 6 mm Passive keyring tag. Suitable for use with all readers in this brochure except BC x 49 x 4.5 mm Passive printable ISO card. Suitable for use with all readers in this brochure except BC556-. Includes a magnetic stripe with CR80 ISO format (track 2) for use in magstripe readers. Pre-printed Mifare Classic k ISO card. Suitable for use with all the Smart Card readers in this brochure. 0 Blank printable Mifare Classic k ISO card. Suitable for use with all the Smart Card readers in this brochure. 0 Description Quantity in order Dimensions (W x H x D) S5450-N7-A S5450-S-A 6FL7820-8KB0 6FL7820-8KB20 Order no.

7 Smart Card 3.56 MHz g BC556- AR68-MX AR682-MX AR68-MS AR682-MS AR6-MX AR620-MX Deunted des a urity, door Loop reader kit. Consists of a BC270 loop coupler and a BC53 reader interface. Used for applications such as invisible hands-free access control and Automatic Vehicle Identification (AVI). Active card: cm (depending on the loop) Clock&Data or 0 to 35 VDC Mifare Classic k & 4k (CSN, S/B, MAD); DESfire (CSN); Mifare DESfire EVI (CSN, File), Mifare UltraLight & my-d prox (CSN, B); STM LRI52, my-c, my-d vic, I-Code SLI, Tag-IT HFI (CSN) Card-only reader. Square design. Smart two-part construction makes it very easy to mount. Supplied with surface mounting frame. 7 cm RS485-monitored CerPass/UCI protocol, 2 to 24 VDC Mifare Classic k & 4k (CSN, S/B, MAD); DESfire (CSN); Mifare DESfire EVI (CSN, File), Mifare UltraLight & my-d prox (CSN, B); STM LRI52, my-c, my-d vic, I-Code SLI, Tag-IT HFI (CSN) Card and PIN reader. Square design. Smart two-part construction makes it very easy to mount. Supplied with surface mounting frame. 7 cm RS485-monitored CerPass/UCI protocol, 2 to 24 VDC Mifare Classic k & 4k (CSN, sector/block), Mifare DESfire EV (CSN, File) Card-only reader. Designed to fit most standard square flush mounting boxes. Supplied with surface mounting frame. 4 cm RS485-monitored CerPass/UCI protocol, 2 to 24 VDC Mifare Classic k & 4k (CSN, sector/block), Mifare DESfire EV (CSN, File) Card and PIN reader. Designed to fit most standard square flush mounting boxes. Supplied with surface mounting frame. 4 cm RS485-monitored CerPass/UCI protocol, 2 to 24 VDC Mifare Classic k & 4k, Mifare UltraLight, my-d proximity, my-c, my-d vicinity, I-Code SLI, Tag-IT HFI, STM LRI52 (all CSN) Card-only reader. Rectangular design. Economical. Configuration can be changed with a configuration card. Supplied with surface mounting frame. 7 cm 9 to 5 VDC Mifare Classic k & 4k, Mifare UltraLight, my-d proximity, my-c, my-d vicinity, I-Code SLI, I- Code, I-Code EPC, Tag- IT HFI, LRI52 Enrollment reader. Designed to read and write cards. Can be connected to a PC. Includes external power supply. 7 cm RS232 interface for connection to a personal computer. Power supply included / er oor 00) ) lastic VDC Indoor for the reader in - terface and indoor or outdoor for the loop coupler 40 to +70 C (BC270) 0 to +50 C (BC53) IP66 (BC270) UV-resistant ABS plastic 65 2 VDC x LED (red/yellow/ green), x buzzer 20 to +60 C 65 2 VDC x LED (red/yellow/ green), x buzzer 20 to +60 C 64 2 VDC green), x buzzer 20 to +70 C 64 2 VDC green), x buzzer 20 to +70 C 80 2 VDC 2 x LED (red/green) x buzzer 25 to +60 C Synthetic ABS/PBT x LED (red/yellow/ green), x buzzer Indoor use only 25 to +60 C IP22 Light grey 5 x x BC270: 80 x 60 x 56 BC53: 0 x 95 x 40 mm 85.5 x 9 x 40 mm W/o 9 x 23 mm 85.5 x 9 x 40 mm W/o 9 x 23 mm Membrane keys 85.5 x 9 x 40 mm W/o 9 x 23 mm 85.5 x 9 x 40 mm W/o 9 x 23 mm Membrane keys 76 x 20 x 7 mm 85.5 x 9 x 40 mm ne, FCC, UL SH universal rain cover, FCC, UL SH universal rain cover SH universal rain cover SH universal rain cover, FCC, UL SH universal rain cover, FCC ne 8, 970, IB9, IB928, IB970 ABP500-PR ABP500-BL ABP500-PR ABP500-BL ABP500-PR ABP500-BL ABP500-PR ABP500-BL ABP500-PR ABP500-BL ABP500-PR ABP500-BL S24246-F4702-A 6FL770-8BK 6FL770-8BL 6FL770-8AH 6FL770-8AJ 6FL770-8DK 6FL770-8CK Accessories SH SH2 SH3 SH4 IS39 BB3 BB4 BB6 SH is a universal protective cover for card readers. It is recommended for outdoor installations. 20 x 225 x 60 S24246-Z3652-A SH2 is a protective cover for K42, K44Duo, M43, PP500- EM and PP500-. There are cuttings for cables to simplify the process of adding it to an existing installation. 04 x 68 x 90 S24246-Z3554-A SH3 is a protective cover for BM3, BM3, BT4, BT44 and BTK4. There are cuttings for cables to simplify the process of adding it to an existing installation. 04 x 225 x 90 S24246-Z5400-A SH4 is a protective cover for BC65 and BC43. There are cuttings for cables to simplify the process of adding it to an existing installation. 40 x 200 x 90 S24246-Z3655-A IS39 is designed for use where higher security is needed. It can be used with K42, K44Duo, M43, PP500-EM and PP500-. It prevents others from seeing which buttons the user presses on the keyboard. 20 x 04 x 95 S24246-Z355-A BB3 is a flush mounting kit designed to provide an unobtrusive and aesthetically appealing installation of the K42, K44Duo, M43, PP500-EM and PP500-. BB4 is a flush mounting kit designed to provide an unobtrusive and aesthetically appealing installation of the BC65 Magstripe and the BC43. BB6 is a flush mounting kit designed to provide a discreet and secure installation of PR500-EM and PR500-. It hides the reader. 7 x 97 (external) 45 x 255 (external) 7 x 200 (external) 85 x 75 x 33 (recess) 5 x 230 x 43 (recess) 85 x 75 x 33 (recess) S24246-Z3552-A S24246-Z3653-A S24246-Z3553-A

8 Siemens AB Industry Sector Building Technologies Division Security Products Englundavägen 7 Box Solna Sweden Tel Fax Siemens AG Industry Sector Building Technologies Division Fire Safety & Security Products Siemensallee Karlsruhe Germany Tel +49 (72) Fax +49 (72) Siemens plc I BT Security Products Suite 7 Castlegate Business Park Caldicot South Wales NP26 5AD United Kingdom Tel +44 (0) Fax +44 (0) The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. Siemens AB - 09/20