Smart Phone Cradle (Option) Barcode Scanner (Option) RF Antenna. Lamp for reading-status. Status Display LCD. Power Adopter USB Terminal

Transcription

1

2

3

4

5 Smart Phone Cradle (Option) Barcode Scanner (Option) RF Antenna Lamp for reading-status Status Display LCD Power Adopter USB Terminal Trigger Tag, Barcode-recognition

6 Titles of parts Power Switch Power/Mode Switch Power On- Short-click on the power switch Power Off- Long-click (1 second and over) on the power switch Switch to Mode Shortclick on the power switch with the power being on the device 1 Displayed while being connected to the HOST via Bluetooth or USB 2 Displayed for the Bluetooth settings, (If USB, then displays USB) 3 Displayed if the device is being charged through and adaptor or USB. 4 Indicates the chargingstatus of the battery 5 Indicates the number of the tags or barcodes 6 Indicates the currentlyused mode (UHF / Barcode) 7 Indicates the read tag/ barcode lists

7 Charging the Battery Charging the main body U Separate the protection cover of the power/usb connection terminal. 2. Connect to the power adaptor terminal of U to start charging, then the status lamp for charging turns on. 3. Green on the status lamp for charging indicates the completion of charging. Charging the battery pack Charging the cradle 1. Connect the cable to the battery pack s power connection terminal to start charging, then the status lamp for charging turns on. 2. Connecting to the power adaptor terminal of U allows the device to charge then the status lamp for charging turns on. 3. Green on the status lamp for charging indicates the completion of charging. 1. Connect to the cradle s power adaptor terminal to start charging, then the status lamp for charging turns on to red. 2. Green on the status lamp for charging indicates the completion of charging.! Do not use any other power device except for the designated power adaptor provided with the purchase of U The use of an incongruent battery may cause an explosion.

8 Changing the Battery Combining the Battery Push the battery pack into the device while holding the hold downward. Separating the Battery Push the hold towards the bottom of the device and remove the battery pack.! Do not use any other power device except for the designated power adaptor provided with the purchase of U The use of an incongruent battery may cause an explosion.

9 Hardware Components Frequency Protocol Antenna Power Connection Method Battery Antenna Performance Connecting to System Weight Size Operating Temperature Option FHSS MHz ISO C, EPC Class1 Gen2 Patch Antenna 1W (30dBm) Bluetooth, USB 3.7v Vdc 3,400mA (6 hours) (duration of usage may be different according to a surrounding environment in terms of usin g the device.) Typical 3 meters (Tag dependent) Smart phone, UMPC, Laptop, Desktop PC, etc. 350g 1200 x 750 x 1100mm (W x D x H) -20 C ~ 50 C RF 13.56MHz, Barcode Scanner 1D, 2D

10 System Features Realizes compactness / light weight Increased the user convenience through the ergonomic design and realization of light weight. Increases the task-efficiency and reduced the costs of purchasing other devices Push the hold towards the bottom of the device and remove the battery pack. Increases the duration of usage The device can run for 6 hours without charging with a high-capacity battery equipped and low power-consumption design. Compatibility and easy maintenance U Application programs of U are developed upon PC base (Win XP, Vista, Win7, NT, etc.) so that the device has high compatibility in comparison with a PDA reader that operates on the Windows CE base, and facilitates better maintenance and upgrades. Processes massive data at a high speed Operating the device from the PC allows fast process of massive data. Utilized for various tasks Both wired and wireless connections are available for PCs in any type therefore, the device can be applied to various types of work.

11

12 Barcode Scanner

13 전원 Power How to turn on the power How to turn off the power Power Switch 1. Press down firmly on the power switch for a second to turn on the power. 2. Lights on the LCD display and green LED indicate the device in running order. 1. Press down firmly on the power switch for 3 seconds to turn off the power. 2. Lights on the LCD go off, if the device is under the stable operation. * The flickering LED and buzzer sound indicate to remove a finger from the power button being pressed. Remove your finger from the button.

14 Status indicator

15 Device Search My Device

16 Device Search My Device Service Search Bluetooth Serial Port

17 Service Search Bluetooth Serial Port(COM5)

18

19

20

21 블루투스와 USB 모드변경방법 Changing to Bluetooth or USB mode Changing the mode Status indicator 전원이 Make 켜져있는지 sure the 확인 power 합니다. is on 전원스위치와 Press the CLR power 스위치를 switch 동시에 and 3초간 CLR ( 부저 switch 소리가 at 3 the 번나면 same ) 누른 time 후스위치를 for 3 seconds 뗍니다. and remove your fingers from them after 3 seconds of the buzzer sound LCD 화면에 Bluetooth 블루투스 mode 모드이면 on the USB LCD 모드로 display 변경됩니다 changes.. the USB mode 반대로 Conversely, USB 모드이면 USB 블루투스 mode 모드로 changes 변경됩니다 to Bluetooth. mode. 5. Make sure that you press both switches simultaneously. If not, the device may recognize the 5. 이때두 action 개스위치가 differently 동시에 and 놀러지지 execute 않으면 a wrong 다른모드로 mode. 인식할수있으니, 반드시같이눌러사용합니다.

22 Connecting to the Smart Phone How to connect 1. Make sure the power is on. 2. Check if Bluetooth mode is on the LCD display. 3. Execute the Device Search on the smart phone and try paring. (Bluetooth Device Name shall be appeared to be RFID U9-4000(******). 4. If paring succeeds, connect to and use the program.

23

24

25

26

27

28

29

30

31

32

33