S5U1C31D50T1 Manual (S1C31D50 Evaluation Board)
|
|
- Shana Edwards
- 5 years ago
- Views:
Transcription
1 CMOS 32-BIT SINGLE CHIP MICROCONTROLLER S5U1C31D50T1 Manual (S1C31D50 Evaluation Board) Rev.1.0
2 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purposes. It is not intended to meet the requirements of design for finished products. 2. This evaluation board/kit or development tool is intended for use by an electronics engineer and is not a consumer product. The user should use it properly and in a safe manner. Seiko Epson dose not assume any responsibility or liability of any kind of damage and/or fire coursed by the use of it. The user should cease to use it when any abnormal issue occurs even during proper and safe use. 3. The part used for this evaluation board/kit or development tool may be changed without any notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. ARM, Cortex, Keil and µvision are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. IAR Systems, IAR Embedded Workbench, C-SPY, I-jet, IAR and the logotype of IAR Systems are trademarks or registered trademarks owned by IAR Systems AB. SEGGER and J-Link are trademarks or registered trademarks of SEGGER Microcontroller GmbH & Co. KG. All rights reserved. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2018, All rights reserved.
3 Table of Contents 1. Overview Name and Function of Each Part Settings Jumpers and DIP Swithes Power Supply Audio Amplifier Debugging Software Demo Mode Appendix A Circuit Diagrams Appendix B Parts List Revision History S5U1C31D01T1 Manual Seiko Epson Corporation i
4 1. Overview 1. Overview S5U1C31D50T1(S1C31D50 Evaluation Board) is an evaluation board for the Seiko Epson single-chip microcontroller S1C31D50. The board comes with a speaker connection cable. Figure 1.1 shows the external view of S5U1C31D50T1. Figure 1.1 S5U1C31D50T1 External View S5U1C31D01T1 Manual Seiko Epson Corporation 1
5 2. Name and Function of Each Part 2. Name and Function of Each Part The S5U1C31D50T1 board has the various parts. Table 2.1 lists the main parts on the board. Also Figure 2.1 shows the layout of the parts on the board. Table 2.1 List of Main Parts Name Part Number Description Remarks S1C31D50 U1 Microcontroller(Cortex-M0+) Class-AB audio amplifier U7 For sound output Class-D audio amplifier U8 For sound output USB to Serial Converter 64Mbit/8Mbyte QSPI flash memory U10 U4 Interface with PC (for demo software) For storing a sound ROM data Power Supply Regulator U5 For power supply Micro-USB connector External power connector Sound output connector for class-ab amplifier Sound output connector for class-d amplifier CN1 J11 J8 J9 For power supply from USB-VBUS and For connecting PC For connecting with an external power such as stabilized power supply. For connecting with speaker when selecting class-ab amplifier For connecting with speaker when selecting class-d amplifier Reset Switch SW1 For hardware reset DIP Switches SW2/SW3/SW12 For demo software control *1 Push Switches SW4/SW5/SW6/SW7/ SW8/SW9/SW10/SW11 For demo software control *1 *1 For details of the switches, refer to the S1C31D50 Peripheral Circuit Sample Software Manual. 2 Seiko Epson Corporation S5U1C31D01T1 Manual
6 2. Name and Function of Each Part External power connector Power Supply Regulator Debug Probe I/F Connector Reset Switch USB to Serial Converter Class-AB Amplifier Micro-USB Connector (3) Sound output connector for Class-AB Amp. S1C31D50 QSPI Flash Memory (3) Sound output connector for Class-D Amp. DIP Switches Class-D Amplifier Push Switches Figure 2.1 Layout of Main Parts S5U1C31D01T1 Manual Seiko Epson Corporation 3
7 3. Settings 3. Settings 3.1 Jumpers and DIP Swithes Although the S5U1C31D50T1 board is shipped with the jumpers set to an operable state, please check to see if they have been set correctly as shown below. Connector: J3 Table J3 Jumper Settings Pin No. Open/Short Remarks Pin No. Open/Short Remarks 1 2 Short Short 3 4 Short Short 5 6 Short Short 7 8 Short Short 9 10 Short Short Short Short Short Short Short Short Short Short Short Short Short Short Short Short Short Short Connector: J4 Table J4 Jumper Settings Pin No. Open/Short Remarks Pin No. Open/Short Remarks 1 2 Short Short 3 4 Short Short 5 6 Short Short 7 8 Short Short 9 10 Short Short Short Short Short Short Short Short Short Short Short Short Short Short Short Short Short Seiko Epson Corporation S5U1C31D01T1 Manual
8 3. Settings Table J5 Jumper Settings Connector: J5 Pin No. Open/Short Remarks Pin No. Open/Short Remarks 1 2 Short Short 3 4 Short Short 5 6 Short Short 7 8 Short Short 9 10 Short Short Short Short Short Short Short Short Short Short Short Short Short Short Table J6 Jumper Settings Connector: J6 Pin No. Open/Short Remarks Pin No. Open/Short Remarks 1 2 Short Short 3 4 Short Short 5 6 Short Short 7 8 Short Short 9 10 Short Short Short Short Short Short Short Short Short Short Short Short Short Short Short - - Table JP1 Jumper Setting Connector: JP1 Pin No. Open/Short Remarks 2 3 Short Table JP2 Jumper Setting Connector: JP2 Pin No. Open/Short Remarks 1 2 Short S5U1C31D01T1 Manual Seiko Epson Corporation 5
9 3. Settings Table JP3 Jumper Setting Connector: JP3 Pin No. Open/Short Remarks 1 2 Short Table JP4 Jumper Setting Connector: JP4 Pin No. Open/Short Remarks 1 2 Short Table JP5 Jumper Setting Connector: JP5 Pin No. Open/Short Remarks 1 2 Short Don t Change. Table JP6 Jumper Setting Connector: JP6 Pin No. Open/Short Remarks 1 2 Short Don t Change. Table J12 Jumper Setting Connector: J12 Pin No. Open/Short Remarks 1 2 Short Table J13 Jumper Setting Connector: J13 Pin No. Open/Short Remarks 1 2 Short 6 Seiko Epson Corporation S5U1C31D01T1 Manual
10 3. Settings Table SW2 DIP Switch Setting SW2-1 SW2-2 SW2-3 SW2-4 Remarks OFF OFF OFF OFF Default Table SW3 DIP Switch Setting SW3-1 SW3-2 SW3-3 SW3-4 Remarks OFF OFF OFF OFF Default Table SW12 DIP Switch Setting SW3-1 SW3-2 SW3-3 SW3-4 Remarks OFF OFF OFF OFF Default J12 JP1 J6 J13 JP3 JP2 J3 J5 JP6 JP4 JP5 J4 Figure Layout of Jumpers S5U1C31D01T1 Manual Seiko Epson Corporation 7
11 3. Settings 3.2 Power Supply The power supply can be selected from among three sources shown below by setting the J12 jumper, T2 and T5 pins. Make sure of the jumper and the pins settings before using the S5U1C31D50T1 board. External: VBUS: Debug: Connector:J12, Pins:T2/T5 Power is supplied to J11 from an external power such as the stabilized power supply. Power is supplied to CN1 from USB-VBUS. Power is supplied to CN3 from the debug probe (hardware debugging tool). Table Power Supply Switching Power Source Selection J12 Setting T2/T5 Setting Remarks External(J11) Short between pins 2 and 3 Open DC +5 V VBUS(CN1) Short between pins 1 and 2 Open DC +5 V Debug(CN3) Open all pins Connect pin T2 to pin T5 via a cable DC +5 V Jumper (J12) for selecting power supply. Connector(J11) for supplying external power Pins(T2, T5) used to get power from debug probe. Connecter(CN3) for connecting debug probe via Bridge Board Ver.2.. T5 T2 micro USB connector(cn1) Figure Layout of Jumpers for Power Supply Selecting 8 Seiko Epson Corporation S5U1C31D01T1 Manual
12 3. Settings 3.3 Audio Amplifier The S5U1C31D50T1 board has two types of audio amplifiers shown below. Class-AB audio amplifier Class-D audio amplifier The audio amplifier can be selected by setting the JP1, JP2, JP3, J13, JP4 and J5 jumpers. Also, for each amplifier, the signal to input to the amplifier can be selected from either single-ended input or differential input. Note: Amplifier settings should not be done during power supply. Parts mounted on the board such as amplifier may be damaged. Please switch the amplifier with the power off. Connectors: JP1/JP2/JP3/J13/JP4/ JP5 Amplifier Type Table Amplifier Settings (Differential Input) JP1 JP2 JP3 J13 JP4 J5 Class-AB Short 2 to 3 Short 1 to 2 Short 1 to 2 Short 1 to 2 Don t care Class-D Don t care Short 2 to 3 Short 2 to 3 Don t care Short 1 to 2 Connectors: JP1/JP2/JP3/J13/JP4/ JP5 Amplifier Type Table Amplifier Settings (Single-ended Input) Short 9 to 10 Short 11 to 12 Short 9 to 10 Short 11 to 12 JP1 JP2 JP3 J13 JP4 J5 Class-AB Short 1 to 2 Short 1 to 2 Short 1 to 2 Open Don t care Class-D Don t care Short 2 to 3 Short 2 to 3 Don t care Short 2 to 3 Short 10 to 11 Open 9 and 12 Short 10 to 11 Open 9 and 12 S5U1C31D01T1 Manual Seiko Epson Corporation 9
13 3. Settings Jumpers(JP1/JP2/JP3/J13/JP4/JP5) for setting audio amplifier Speaker output connector (J8) for class-ab amplifier Speaker output connector (J9) for class-d amplifier Figure Layout of Jumpers and Connectors for Audio Amplifier Selecting 10 Seiko Epson Corporation S5U1C31D01T1 Manual
14 4. Debugging Software 4. Debugging Software Connect the S5U1C31D50T1 board with a debug probe either IAR Systems I-jet or SEGGER J-Link via the Bridge Board Ver.2(S5U1C31001L1200) that comes with the S5U1C31D50T1 board. The S5U1C31D50T1 board and the Bridge Board Ver.2 should be connected using the 10-pin cable supplied with the Bridge Board Ver.2 as shown below. The cable connector pin at the triangle mark must be connected to pin 1 of the CN3 pin-connector on the S5U1C31D50T1 board. 20 Pin Cable included with I-jet ARM-20 Adapter included with I-jet S5U1C31D50T1 Bridge Board Ver.2 I-jet (IAR Systems) USB Cable included with I-jet JP2 : Short 10 Pin Cable included with Bridge Board Ver.2 Connect PC to CN3 via the debug probe and Bridge Board Ver.2. Connect T2 to T5 via a cable when supplying power from debug probe.. Remove a jumper plug from J12 when supplying power from debug probe. Figure 4.1 Connection Diagram of S5U1C31D50T1, Bridge Board Ver.2 and I-jet S5U1C31D01T1 Manual Seiko Epson Corporation 11
15 4. Debugging Software 20 Pin Cable included with J-Link S5U1C31D50T1 Bridge Board Ver.2 J-Link (SEGGER) USB Cable included with J-Link JP2 : Short 10 Pin Cable included with Bridge Board Ver.2 Connect PC to CN3 via the debug probe and Bridge Board Ver.2. Connect T2 to T5 via a cable when supplying power from debug probe.. Remove a jumper plug from J12 when supplying power from debug probe. Figure 4.2 Connection Diagram of S5U1C31D50T1, Bridge Board Ver.2 and J-Link 12 Seiko Epson Corporation S5U1C31D01T1 Manual
16 5. Demo Mode 5. Demo Mode In the demo mode, you can operate the push switches(sw4, SW5,..., SW10) on the evaluation board to run the sound playback such as 2ch mixing playback and speed conversion playback. The procedure for running the demo mode is as follows. 1) Set the Jumpers and the DIP switches to default. (Refer to 3.1 Jumpers and DIP switches ) 2) Set the power supply to VBUS. (Refer to 3.2 Power Supply) 3) Connect CN1(USB) to PC or mobile battery via a micro USB cable to supply the 5V power. 4) Press SW1(RESET) to reset the evaluation board. 5) Press SW4(PLAY/STOP-CH0) and/or SW5(PLAY/STOP-CH1) to start the sound play. For details of the demo mode, refer to 4. Demo Software in S1C31D50 Peripheral Circuit Sample Software Manual Micro-USB Connector (CN1) Jumper for power supply selecting (J12) Reset Switch (SW1) or Sound output connector for class AB (J8) Mobile battery (5V) DIP Switch (SW2) ON Micro USB cable DIP Switch (SW12) ON DIP Switch (SW3) ON Push Switches (SW4/5/6/7/8/9/10) Figure 5.1 Layout of Main Parts for Demo Mode S5U1C31D01T1 Manual Seiko Epson Corporation 13
17 Appendix A Circuit Diagrams Appendix A Circuit Diagrams 14 Seiko Epson Corporation S5U1C31D01T1 Manual
18 Appendix A Circuit Diagrams S5U1C31D01T1 Manual Seiko Epson Corporation 15
19 Appendix A Circuit Diagrams 16 Seiko Epson Corporation S5U1C31D01T1 Manual
20 Appendix B Parts List Appendix B Parts List Note! Parts are subject to change without notice. S5U1C31D01T1 Manual Seiko Epson Corporation 17
21 Revision History Revision History Attachment-1 Rev. No. Date Page Category Contents Rev /10/1 All New New establishment 18 Seiko Epson Corporation S5U1C17M13T1 Manual
22 International Sales Operations America Epson America, Inc. Headquarter: 3840 Kilroy Airport Way Long Beach, California USA Phone: San Jose Office: 214 Devcon Drive San Jose, CA USA Phone: or Europe Epson Europe Electronics GmbH Riesstrasse 15, Munich, Germany Phone: FAX: Asia Epson (China) Co., Ltd. 4th Floor, Tower 1 of China Central Place, 81 Jianguo Road, Chaoyang District, Beijing China Phone: FAX: Shanghai Branch Room 1701 & 1704, 17 Floor, Greenland Center II, 562 Dong An Road, Xu Hui District, Shanghai, China Phone: FAX: Shenzhen Branch Room , 8 Floor, Tower 2, Ali Center,No.3331 Keyuan South RD(Shenzhen bay), Nanshan District, Shenzhen , China Phone: FAX: Epson Taiwan Technology & Trading Ltd. 15F, No.100, Songren Rd, Sinyi Dist, Taipei City 110. Taiwan Phone: Epson Singapore Pte., Ltd. 1 HarbourFront Place, #03-02 HarbourFront Tower One, Singapore Phone: FAX: Seiko Epson Corp. Korea Office 19F, KLI 63 Bldg, 60 Yoido-dong, Youngdeungpo-Ku, Seoul , Korea Phone: FAX: Seiko Epson Corp. Sales & Marketing Division Device Sales & Marketing Department 421-8, Hino, Hino-shi, Tokyo , Japan Phone: FAX: Document Code: First Issue October 2018 in JAPAN
S1C31 Family PA File Creation Tool Manual
CMOS 32-BIT SINGLE CHIP MICROCONTROLLER S1C31 Family PA File Creation Tool Manual Rev.2.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is
More informationGNU17V3 Setup Guide. Rev.2.0
GNU17V3 Setup Guide Rev.2.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or
More informationS1C17 Family Port Nested Interrupt Application Notes
S1C17 Family Port Nested Interrupt Application Notes Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering
More informationS1C17 Family Application Note S1C17 Series Boot Loader Sample Software
S1C17 Family Application Note S1C17 Series Boot Loader Sample Software Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for
More informationS1V3G340 External SPI-Flash Select Guide
S1V3G340 External SPI-Flash Select Guide Rev.1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson
More informationS1C17 Family Application Library S1C17 Series Steps Calculation Library
S1C17 Family Application Library S1C17 Series Steps Calculation Library Rev. 2.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed
More informationS1C17 Family EEPROM Emulation Library Manual
S1C17 Family EEPROM Emulation Library Manual Rev.1.1 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation,
More informationFor S1C63 Family Flash microcontroller Multiple-Programming ROM Writer Software (GW63)
For S1C63 Family Flash microcontroller Multiple-Programming ROM Writer Software (GW63) Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool
More informationFSA. Library Link. Rev.1.0
FSA Library Object Link Manual Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration,
More informationCMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C31D01T1 Manual (Software Evaluation Tool for S1C31D01)
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C31D01T1 Manual (Software Evaluation Tool for S1C31D01) Rev.1.2 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development
More informationConnecting EPSON Display Controllers to Topway LCD Panels
Connecting EPSON Display Controllers to Topway LCD Panels Document Number: Issue Date: 2012/04/23 SEIKO EPSON CORPORATION Rev. 1.0 Page 2 NOTICE No part of this material may be reproduced or duplicated
More informationS1V30080 Series I2C Interface Sample Program Specifications
S1V30080 Series I2C Interface Sample Program Specifications Rev.1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko
More informationS1C17 M01/W22/W23/W15 Self-Modifying Software (FLS) Manual
S1C17 M01/W22/W23/W15 Self-Modifying Software (FLS) Manual Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering
More informationSG-8506CA-EVB Preliminary
SG-8506CA Evaluation Board Manual SG-8506CA-EVB Preliminary Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering
More informationCMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17656T Manual (Software Evaluation Tool for S1C17656)
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17656T Manual (Software Evaluation Tool for S1C17656) Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development
More informationS1C33 Family Application Note S1C33L26 Software Reference Manual
S1C33 Family Application Note S1C33L26 Software Reference Manual Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use
More informationS5U1C88000P Manual (S1C88 Family Peripheral Circuit Board)
MF1434-01 CMOS 8-BIT SINGLE CHIP MICROCOMPUTER S5U1C88000P Manual (S1C88 Family Peripheral Circuit Board) NOTICE No part of this material may be reproduced or duplicated in any form or by any means without
More informationS1C31D01 Photoplethysmography (PPG) Demonstration Kit Software Manual
S1C31D01 Photoplethysmography (PPG) Demonstration Kit Software Manual Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for
More informationS1V3G340 Development Reference Guide
S1V3G340 Rev.1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes
More informationMulti Programmer Ver.4.0 (S5U1C17000Y24) User Manual
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER Multi Programmer Ver.4.0 (S5U1C17000Y24) User Manual Rev.2.01 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development
More informationS5U1S65K01H4100 Camera Board Technical Manual
S5US65K0H400 Camera Board Technical Manual Rev..0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson
More informationVCC_3.3V GND. USB Evaluation Cable (M-C30EV041) RTS CTS UART_RXD. Fig1. Block Diagram
Data Sheet Evaluation Cable Interface / Breakout Board for EPSON IMU OVERVIEW This Evaluation Cable Interface/Breakout Board is designed to convert the 1mm pitch connector of the Epson IMU to a.54mm pitch
More informationS1C17555/565/955/965
DESCRIPTIONS 16-bit Single Chip Microcontroller Built-in FSA (Flexible Signal processing Accelerator) function; It realize high processing with low power 12-bit A/D converter Several kinds of serial interface
More informationS2R72A54 Application Note
S2R72A54 Application Note Rev.1.02 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
More informationIMU (Inertial Measurement Unit) IMU / USB Interface Board (M-G3xx, M-V3xx) Logger Software User s Guide
IMU (Inertial Measurement Unit) IMU / USB Interface Board (M-G3xx, M-V3xx) Logger Software User s Guide Rev.20181129 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit
More informationS1R72U16 Development Support Manual
S1R72U16 Development Support Manual Rev.2.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves
More informationS5U1C17000Y2 GangWriter Software Manual
S5U1C17000Y2 GangWriter Software Manual Rev.1.0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves
More informationS1F77330 Series Technical Manual
Series Technical Manual Rev.2.1 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
More informationS5U1C63000P Manual (S1C63 Family Peripheral Circuit Board)
MF1408-01a CMOS 4-BIT SINGLE CHIP MICROCOMPUTER S5U1C63000P Manual (S1C63 Family Peripheral Circuit Board) NOTICE No part of this material may be reproduced or duplicated in any form or by any means without
More informationRC90 Upgrade Procedures
RC90 Upgrade Procedures EM136R2547F Table of Contents Thank you for purchasing our robot system. Before using the robot system, please read this manual thoroughly and use the product properly. Keep this
More informationPCB Design Guidelines for S1R72V Series USB 2.0 High-Speed Devices
PCB Design Guidelines for S1R72V Series USB 2.0 High-Speed Devices Rev.2.3 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of
More informationCMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17651T2 Manual (Software Evaluation Tool for S1C17651)
CMOS 6-BIT SINGLE CHIP MICROCONTROLLER SUC76T Manual (Software Evaluation Tool for SC76) Rev..0 Evaluation board/kit and Development tool important notice. This evaluation board/kit or development tool
More informationRenesas Starter Kit Sample Code for Cubesuite + Toolchain
APPLICATION NOTE RL78/G13 R01AN0965EG0100 Rev 1.00 Introduction Renesas Starter Kits (RSK) are supplied as complete development systems for the selected microcontroller. The kit includes an evaluation
More informationSilicon Epitaxial Planar Zener Diode for Stabilized Power Supply. Type No. Mark Package Code HZS Series Type No. MHD B 7
Silicon Epitaxial Planar Zener Diode for Stabilized Power Supply Features REJ3G184-3Z (Previous: ADE-28-12B) Rev.3. Mar.11.24 Low leakage, low zener impedance and maximum power dissipation of 4 mw are
More informationThis product is under planning; the specifications may be changed in the release model.
CMOS 4-bit Single Chip Microcontroller High Performance 4-bit Core CPU S1C63000 Flash EEPROM 31K 13 bits / 4K 4 bits Dot Matrix LCD Controller and Driver R/f Converter to Measure Temperature and Humidity
More informationRegarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and
More informationSN8F5000 Starter-Kit User Manual
SONiX Technology Co., Ltd. User Manual 8051-based Microcontroller 1 Overview of Starter Kit provides easy-development platform. It includes SN8F5000 family real chip and I/O connectors to input signal
More informationE1 Emulator Additional Document for User s Manual (Notes on Connection for RL78)
User s Manual E1 Emulator Additional Document for User s Manual (Notes on Connection for RL78) Supported Devices: RL78 Family RL78/G13 RL78/G14 RL78/I1A All information contained in these materials, including
More informationYASKAWA AC Drive-J1000 Option. RS-232C Interface. Technical Manual Type SI-232/J, SI-232/JC RS-232C SI-232/J, SI-232/JC J1000
YASKAWA AC Drive-J1000 Option RS-232C Interface Technical Manual Type SI-232/J, SI-232/JC To properly use the product, read this manual thoroughly and retain for easy reference, inspection, and maintenance.
More informationS1C17W23 EL Lamp Application Notes
S1C17W23 EL Lamp Application Notes Rev. 1.1 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration,
More information1. Installation Creating the Project Workspace Adding Sample Code into DS Adding GNU Toolchain Support for DS-5...
Introduction APPLICATION NOTE Renesas Starter Kit+ (RSK+) is supplied as complete development systems for the selected microcontroller. The kit includes an evaluation board, portable On-Chip Debugger and
More informationAtmel AVR ATxmega384C3 microcontroller OLED display with 128x32 pixels resolution Analog sensors. Ambient light sensor Temperature sensor
APPLICATION NOTE Atmel AVR1939: XMEGA-C3 Xplained Getting Started Guide Features Atmel AVR ATxmega384C3 microcontroller OLED display with 128x32 pixels resolution Analog sensors Ambient light sensor Temperature
More informationLAN Magnetics Solution for 1000BASE-T Evaluation Board TDK Part number: ALT4532-EVA-01
LAN Magnetics Solution for 1000BASE-T Evaluation Board TDK Part number: ALT4532-EVA-01 Contents PCB area reduction from typical module to discrete placement Typical module TDK discrete placement 17.53
More informationSEGGER J-Link Lite for Renesas Synergy TM
User s User Manual s Manual SEGGER J-Link Lite for Renesas Synergy TM Renesas Synergy Platform Synergy Tools & Kits Tools: YSJLINKLITE User s Manual All information contained in these materials, including
More informationOscillation stop detection circuit included
(rev1.0) DESCRIPTIONS 16-bit Single Chip Microcontroller Wide operating voltage range from 1.8 V to 5.5 V. A maximum of 88 general-purpose I/O ports are available. Equipped with a two-channel 10-bit A/D
More informationSCI7654M0A/C0A. DC/DC Converter. Double/Triple/Quadruple Boosting 95% Excellent Power Conversion Efficiency Built-in Voltage Regulator DESCRIPTION
PF754-03 SCI7654M0A/C0A DC/DC Converter Double/Triple/Quadruple Boosting 95% Excellent Power Conversion Efficiency Built-in Voltage Regulator DESCRIPTION The SCI7654 is a highly efficient, but low power-consumption
More informationAtmel AVR1926: XMEGA-B1 Xplained Getting Started Guide. 8-bit Atmel Microcontrollers. Application Note. Features. 1 Introduction
Atmel AVR1926: XMEGA-B1 Xplained Getting Started Guide Features Easy to reprogram with just a USB cable and a preprogrammed boot loader Easy to debug code with PDI-based debugger/emulator Can be used with
More information1. Installation Creating the Project Workspace Opening Sample Code and Source Files Source Code Functionality...
Introduction APPLICATION NOTE R01AN1789EG0100 Rev.1.00 Renesas Starter Kits (RSK) is supplied as complete development systems for the selected microcontroller. The kit includes an evaluation board, portable
More informationCMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17W23T Manual (Software Evaluation Tool for S1C17W22/W23)
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17W23T Manual (Software Evaluation Tool for S1C17W22/W23) Rev.1.1 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or
More informationThe S1F77330 series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes
OVERVIEW Power Bus Switch IC 2 to 1 Bus Switch The S1F77330 series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes the S1F77330 series by low power consumption.
More informationBlueprint B204. NINA-B1 USB dongle. Application Note
Blueprint B204 NINA-B1 USB dongle Application Note Abstract This application note describes the features and design of B204. This design is available to u-blox customers as a blueprint, including the schematics,
More informationAtmel AVR1924: XMEGA-A1 Xplained Hardware User's Guide. 8-bit Atmel Microcontrollers. Application Note. Preliminary. Features.
Atmel AVR1924: XMEGA-A1 Xplained Hardware User's Guide Features Atmel ATxmega128A1 microcontroller External memory - 8MB SDRAM Atmel AT32UC3B1256 - Communication gateway - Programmer for Atmel AVR XMEGA
More information1. Opening the sample code workspace Loading the selected sample code project Opening Sample Code and Source Files...
Introduction APPLICATION NOTE R01AN1790EG0100 Rev.1.00 Renesas Starter Kits (RSK) is supplied as complete development systems for the selected microcontroller. The kit includes an evaluation board, portable
More informationRegarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and
More informationS1R72U06 Application Note
S1R72U06 Application Note Rev. 1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
More informationS2R72A54 Evaluation Board Manual
SR7A5 Evaluation Board Manual Rev.. Evaluation board/kit and Development tool important notice. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration,
More informationIAR EWARM Quick Start for. Holtek s HT32 Series Microcontrollers
IAR EWARM Quick Start for Holtek s Microcontrollers Revision: V1.10 Date: August 25, 2011 Table of Contents 1 Introduction... 5 About the Quick Start Guide... 5 About the IAR EWARM... 6 2 System Requirements...
More informationAPPLICATION NOTE. Atmel AT03160: Migrating Bootloader from ATxmega128A1 to other Atmel XMEGA Devices. Atmel AVR XMEGA. Features.
APPLICATION NOTE Atmel AT03160: Migrating Bootloader from ATxmega128A1 to other Atmel XMEGA Devices Features Atmel AVR XMEGA bootloader Procedure application C-code sample application for Self Programming
More informationOLED display with pixels resolution Ambient light sensor CPU load Analog filter Quadrature Encoder with push button Digital I/O
APPLICATION NOTE Atmel AT02657: XMEGA-E5 Xplained Software User Guide Features OLED display with 128 32 pixels resolution Ambient light sensor CPU load Analog filter Quadrature Encoder with push button
More informationVS-616PC5/P5 Option Instruction Manual
VS-66PC5/P5 Option Instruction Manual Isolated 4-20mA Output Monitor Card PRECAUTIONS! DANGER. Read this instruction manual in its entirety before installing the Isolated Monitor Card or operating the
More information16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller Solutions Group, Scotland
Freescale Semiconductor Users Guide Document Number: S12XHY256ACDUG Rev. 0, 10/2010 16-bit MCU: S12XHY256 Automotive Cluster Demo by: Jose M. Cisneros Steven McLaughlin Applications Engineer Microcontroller
More informationS5U13781R00C10M User Manual
S5U13781R00C10M User Manual Document Number: Status: Revision 1.0 Issue Date: 2012/09/25 SEIKO EPSON CORPORATION Rev. 1.0 Page 2 Evaluation board/kit and Development tool important notice 1. This evaluation
More informationFuture Technology Devices International
Future Technology Devices International Datasheet UMFT51AA 8051 Compatible Module UMFT51AA is an FT51A DIP module that is compatible with an 8051 microcontroller. 1 Introduction 1.1 Features The UMFT51AA
More informationDesign Kit (for ANSOFT Designer TM / Nexxim TM ) User s Manual
Technical Note Design Kit (for ANSOFT Designer TM / Nexxim TM ) User s Manual Document No. PX10401EJ03V0TN (3rd edition) Date Published December 2005 CP(K) NEC Compound Semiconductor Devices, Ltd. 2003,
More information1. Installation Creating the Project Workspace Opening Sample Code and Source Files Source Code Functionality...
Introduction APPLICATION NOTE Renesas Starter Kits (RSK) is supplied as complete development systems for the selected microcontroller. The kit includes an evaluation board, portable On-Chip Debugger and
More informationAPPLICATION NOTE. AT03324: Atmel REB212BSMA-EK Quick Start Guide. Atmel MCU Wireless. Introduction
APPLICATION NOTE AT03324: Atmel REB212BSMA-EK Quick Start Guide Atmel MCU Wireless This application note briefly describes how to set up and run the pre-flashed applications supplied with the Atmel REB212BSMA
More informationHYDRA-X23/X23S. Power Application Controllers. PAC HYDRA-X User s Guide. Copyright 2014 Active-Semi, Inc.
HYDRA-X23/X23S Power Application Controllers PAC5223 - HYDRA-X User s Guide www.active-semi.com Copyright 2014 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 HYDRA-X23/X23S Body Resources...5 Header
More informationM3H Group(1) Application Note. I 2 C Interface (I2C-B) MASTER/SLAVE
M3H Group(1) I 2 C Interface (I2C-B) MASTER/SLAVE Outlines This application note is a reference material for developing products using the Master/Slave function in I2C interface (I2C) functions of M3H
More informationAVR4018: Inertial Two (ATAVRSBIN2) Hardware User's Guide. 8-bit Microcontrollers. Application Note. Features. 1 Introduction
AVR4018: Inertial Two (ATAVRSBIN2) Hardware User's Guide Features Compatible with all Atmel AVR Xplain MCU boards Full nine-degree-of-freedom inertial sensing InvenSense three-axis MEMS gyroscope (IMU-3000
More informationAudio digital potentiometers
Audio digital potentiometers The is a digital potentiometer designed for use in audio devices. Its built-in 22kΩ resistance systems can be used to set the data from the microcomputer in 256 steps. Applications
More informationNUCLEO-L496ZG. STM32 Nucleo-144 board. Features. Description
STM32 Nucleo-144 board Data brief Features STM32 microcontroller in LQFP144 package Two types of extension resources: ST Zio connector including: support for Arduino Uno V3 connectivity (A0 to A5, D0 to
More informationUnit: mm Max Max Max Min 5.06 Max Min ± ± 0.10
Unit: mm 19.20 20.32 Max 14 8 6.30 7.40 Max 1 1.30 7 2.39 Max 2.54 ± 0.25 0.48 ± 0.10 0.51 Min 2.54 Min 5.06 Max 0 15 0.25 7.62 + 0.10 0.05 Hitachi Code JEDEC EIAJ Weight (reference value) DP-14 0.97 g
More informationRegarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and
More informationSEIKO EPSON CORPORATION
Power Bus Switch IC 1 to 1 Bus Switch OVERVIEW The S1F77310 series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes the S1F77310 series by low power consumption.
More informationAtmel AVR1619: XMEGA-B1 Xplained Demonstration. 8-bit Atmel Microcontrollers. Application Note. Features. 1 Introduction
Atmel AVR1619: XMEGA-B1 Xplained Demonstration Features Atmel ATxmega128B1 Atmel XMEGA -B1 Xplained kit compatible On-board LCD display USB 2.0 Full speed composite device - Mass Storage interface with
More informationAmplifier for versatile fiber-optic links
Amplifier for Versatile Fiber-Optic Links Application Specification Author Document Number Revision 1 A.1 Amplifier for versatile fiber-optic links Suitable for extending the optical transmission distance
More informationAVR1922: Xplain Board Controller Firmware 8-bit Microcontrollers Application Note Features 1 Introduction
AVR1922: Xplain Board Controller Firmware Features USB interface - Mass-storage to on-board DataFlash memory Atmel AVR XMEGA TM reset control 1 Introduction The Xplain board controller, an AT90USB1287,
More informationTWR-LS1021A Getting Started
Freescale Semiconductor Getting Started Document Number: TWR-LS1021AGS Rev. 3, 10/2015 TWR-LS1021A Getting Started 1 Introduction This document describes how to connect the QorIQ LS1021A Tower System Module
More informationAtmel AVR473: ATAVRSB202 Hardware User Guide. 8-bit Atmel Microcontrollers. Application Note. Features. 1 Introduction
Atmel AVR473: ATAVRSB202 Hardware User Guide Features Atmel ATmega32HVB Smart Battery device evaluation and development kit High-side N-FETs 5mΩ sense resistor current measurements with 18-bit CC-ADC Input
More informationCMOS 16-BIT SINGLE CHIP MICROCOMPUTER. S5U1C17001H User Manual (ICD Mini Ver. 1.0)
CMOS 16-BIT SINGLE CHIP MICROCOMPUTER S5U1C17001H User Manual NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson.
More informationPG-FP6 Flash Memory Programmer for Renesas MCUs with Flash Memory
[Notification] Transfer is Easy from PG-FP5 to PG-FP6! PG-FP6 Flash Memory Programmer for Renesas MCUs with Flash Memory Outline R20TS0315EJ0100 Rev.1.00 The PG-FP5 flash memory programmer, which is widely
More informationLPC1788 Mio Board. User Manual. Revision 1.0 1
User Manual http://coineltech.com Revision 1.0 1 Designed by CoiNel Technology Solutions LLP No-32, 2 nd Floor, HAPBCO Tower, 9 th Main, RPC Layout, Hampinagar, Bangalore-560040 State: Karnataka Country:
More informationUpdating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME)
Freescale Semiconductor User s Guide Document Number: KTUSBSPIPRGUG Rev. 1.0, 7/2010 Updating the Firmware on USB SPI Boards (KITUSBSPIEVME, KITUSBSPIDGLEVME) Figure 1. KITUSBSPIEVME and KITUSBSPIDGLEVME
More informationET-UARTSWD Users Guide
User s Guide ET-UARTSWD Users Guide Power Application Controller s www.active-semi.com Copyright 2018 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 1. ET-UARTSWD Resources...6 1.1 Provided Connectors...6
More informationCORAL P. MB86295-EB01 Rev CORAL P Evaluation Board. April Revision 1.3 Page Fujitsu Microelectronics Europe
CORAL P MB86295-EB01 Rev. 5.0 April 2004 CORAL P Evaluation Board 1.3 Revision 1.3 Page 1 Revision Control Revision Number Date Description of changes 0.1 9/8/02 Initial Release 0.9 6/12/02 Jumper list
More informationMSC8144AMC-S Getting Started Guide
Freescale Semiconductor Hardware Getting Started Guide Document Number: MSC8144AMCSHWGSG Rev. 2, 07/2008 MSC8144AMC-S Getting Started Guide This document describes how to connect the MSC8144AMC-S card
More informationPMEPS60. Getting Started Handbook Doc. Version 1.6. RISC II 2G Series Processor Module ELAN MICROELECTRONICS CORP.
PMEPS60 RISC II 2G Series Processor Module Getting Started Handbook Doc. Version 1.6 ELAN MICROELECTRONICS CORP. November 2008 i Trademark Acknowledgments: IBM is a registered trademark and PS/2 is a trademark
More informationFTDI Chip. VM800P Datasheet Embedded Video Engine Plus Module. VM800P Embedded Video Engine Plus Module Datasheet Version 1.3
Document Reference No.: BRT_000021 Clearance No.: BRT#008 FTDI Chip VM800P Datasheet Embedded Video Engine Plus Module General Purpose Multi Media Controller The VM800P is a development module for FTDI
More informationSTM3220G-SK/KEI. Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Features. Description
Keil starter kit for STM32F2 series microcontrollers (STM32F207IG MCU) Data brief Features The Keil MDK-Lite development tools: µvision 4 IDE/Debugger for application programming and debugging ARM C/C++
More informationS5U1C63005P Manual (Peripheral Circuit Board for S1C63256)
MF1035-02 CMOS 4-BIT SINGLE CHIP MICROCOMPUTER S5U1C63005P Manual (Peripheral Circuit Board for S1C63256) NOTICE No part of this material may be reproduced or duplicated in any form or by any means without
More information1. Overview Board Specifications S3 Series Board System... 3
Introduction APPLICATION NOTE This document represents universal usage of the S3A7 board mounted on a base board to make an Application Module. The document describes the hardware platform connection interface,
More informationFuture Technology Devices International Ltd
Future Technology Devices International Ltd FTPD-1 FTDI Programmer Debugger 1 Module Datasheet FTPD-1 is a module used for programming and debugging. 1. Introduction 1.1 Features The FTPD-1 is a module
More informationHYDRA-X10. Power Application Controllers TM. PAC HYDRA-X User s Guide. Copyright 2014 Active-Semi, Inc.
HYDRA-X10 Power Application Controllers TM PAC5210 - HYDRA-X User s Guide www.active-semi.com Copyright 2014 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 HYDRA-X10 Body Resources...5 Header Descriptions...5
More informationM3H Group(2) Application Note 12-bit Analog to Digital Converter (ADC-A)
12-bit Analog to Digital Converter (ADC-A) Outlines This application note is a erence material for developing products using the 12-bit analog to digital converter (ADC) function of M3H Group (2). This
More informationS5U13781R01C100 Shield TFT Board for Arduino Due Users Manual
S5U13781R01C100 Shield TFT Board for Arduino Due Users Manual Document Number: Status: Revision 1.0 Issue Date: 2015/07/17 SEIKO EPSON CORPORATION Rev. 1.0 Page 2 Evaluation board/kit and Development tool
More informationSTM32-SK/KEIL STR91X-SK/KEI, STR7-SK/KEIL
STM32 STR91X-SK/KEI, STR7 Keil starter kits for ST ARM core-based microcontrollers Data brief Features The ARM RealView Microcontroller Development Kit complete development software package with: µvision3
More informationSilicon Planar Zener Diode for Low Noise Application. Part No. Cathode Band Package Name Package Code HZ-L Series Navy blue DO-35 GRZZ0002ZB-A 7 B 2
Silicon Planar Zener Diode for Low Noise Application REJ3G182-3 Rev.3. Nov.6.27 Features Diode noise level of this series is approximately 1/3-1/1 lower than the HZ series. Low leakage, low zener impedance
More informationM3H Group(2) Application Note Asynchronous Serial Communication Circuit (UART-C)
M3H Group(2) Asynchronous Serial Communication Circuit (UART-C) Outlines This application note is a erence material for developing products using the asynchronous serial communication circuit (UART) function
More informationS1C33 Family In-Circuit Debugger S5U1C33001H1400
S1C33 Family In-Circuit Debugger S5U1C33001H1400 MANUAL Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation,
More informationWiMOD - im880b. Application Note AN017 / Version 1.1. Firmware Update for im880b. Document ID: 4100/40140/0103. Category:
WiMOD - im880b Application Note AN017 / Version 1.1 Firmware Update for im880b Document ID: 4100/40140/0103 Category: IMST GmbH Carl-Friedrich-Gauss-Str. 2-4 D-47475 Kamp-Lintfort Overview Document Information
More information