CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17651T2 Manual (Software Evaluation Tool for S1C17651)

Transcription

1 CMOS 6-BIT SINGLE CHIP MICROCONTROLLER SUC76T Manual (Software Evaluation Tool for SC76) Rev..0

2 Evaluation board/kit and Development tool important notice. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purpose. It is not intended to meet the requirement of design for finished product.. This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not the product for consumer. The user should use this goods properly and safely. Seiko Epson dose not assume any responsibility and liability of any kind of damage and/or fire coursed by usage of it. User should cease to use it when any abnormal issue occurs even during proper and safe use.. The part used for this evaluation board/kit or development tool is changed without any notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 0, All rights reserved.

3 Configuration of product number Devices S C 7xxx F 00E 00 Packing specifications 00 Besides tape & reel 0A TCP BL directions 0B Tape & reel BACK 0C TCP BR directions 0D TCP BT directions 0E TCP BD directions 0F Tape & reel FRONT 0G TCP BT directions 0H TCP BD directions 0J TCP SL directions 0K TCP SR directions 0L Tape & reel LEFT 0M TCP ST directions 0N TCP SD directions 0P TCP ST directions 0Q TCP SD directions 0R Tape & reel RIGHT 99 Specs not fixed Specification Package [D bare chip, F QFP, B BGA] Model number Model name [C microcomputer, digital products] Product classification [S semiconductor] Development tools SU C 7000 Y 00 Packing specifications [00 standard packing] Version [ Version ] Tool type Hx ICE Dx Evaluation board Ex ROM emulation board Mx Emulation memory for external ROM Tx A socket for mounting Cx Compiler package Sx Middleware package Yx Writer software Corresponding model number [7xxx for SC7xxx] Tool classification [C microcomputer use] Product classification [SU development tool for semiconductor products]

4 Table of Contents. Overview.... Usage Method.... Block Diagram.... Hardware Information.... Layout Information.... Jumpers and Mounting Patterns.... Circuit Diagram Components List... 8 Revision History... 0 SUC76T Manual Seiko Epson Corporation i

5 . Overview. Overview The SUC76T (SVTmini76 Software evaluation Tool for SC76) is an evaluation and development support board for the Seiko Epson single-chip microcontroller SC76. The board has an IC socket for the SC76 and a crystal oscillator, and provides through-holes that draw out each of the SC76 terminals. The SUC76T can be used as the SC76 software development environment, by connecting to the Seiko Epson emulator SUC700H (ICDminiVer.). Operating Temperature Range C to C Operating Voltage Range.0 V to.6 V. Usage Method The SC76 software development environment can be set up with the following procedures. () Connect the ICDminiVer. to the SUC76T connectors (CN- (J), CN- (J)) using the dedicated cables included in the ICDminiVer.. * () Provide the SUC76T operating power supply through the power supply connector (CN (J7)). * () Connect the ICDminiVer. to the PC * using the USB cable included in the ICDminiVer.. * For more information on connecting the ICDminiVer. to the SUC76T, refer to the SUC700H User Manual. * Applying a voltage exceeding the SC76 allowable power supply voltage range is prohibited. For the SC76 power supply voltage range, refer to the SC76 Technical Manual. * The software development tool (SC7Family Compiler Package (SUC700C)) should be installed in the PC. SUC76T Manual Seiko Epson Corporation

6 . Block Diagram. Block Diagram Figure. shows the SUC76T block diagram. CN- Reset Circuit Crystal.000MHz Crystal 768Hz PC (GNU7 v.0.0 or over) ICDmini Ver. CN- P00 * P07 P0 DCLK DSIO DST #RESET OSC OSC SC76 (IC socket) CA CB VC VC COM0 COM SEG0 SEG6 SEG9 Capacitor SEG7 CN- CPU Board (SUC76T) CN- Figure. SUC76T block diagram Seiko Epson Corporation SUC76T Manual

7 . Hardware Information. Hardware Information The SUC76T component layout is shown in Figures. and Figure... Layout Information LED (D) Power supply connector (CN, J7) Jumper switch for external power supply (JP6) Reset switch (SW) Extension connector foot pattern (CN-, J), terminal (TP, TP) ICDmini interface connectors (CN- to, J, J) Jumper switches for capacitors (JP, JP, JP) Extension connector foot pattern (CN-, J) Extension connector foot pattern (CN-, J) power monitor pin (TP) Jumper switch for power supply (JP) Jumper switch for power supply (JP) Extension connector foot pattern (CN-, J6) IC socket for SC76 Figure. SUC76T component layout (front side) SUC76T Manual Seiko Epson Corporation

8 . Hardware Information Crystal oscillator OSC (X) Crystal oscillator OSC (X) ICDmini interface connectors (CN- to, J, J) Figure. SUC76T00 component layout (reverse side) Seiko Epson Corporation SUC76T Manual

9 . Hardware Information. Jumpers and Mounting Patterns Table. shows the SUC76T jumper function list. Table. shows the mounting patterns. Table. Jumper function list Name Type Function JP Pin To connect the SC76 terminal to the power supply. JP, JP, JP Pin To connect the SC76 VC, VC and VC terminals to the connectors (CN-, J), respectively. JP Pin To connect the SC76 terminal to the power supply. Factory default setting Connected Connected Connected Selectable setting Open Open Open Table. Mounting Patterns Description Location Function Connector CN- to External interface (J6,J,J,J) Monitor terminal TP, TP(, GND) Power supply (, GND) SUC76T Manual Seiko Epson Corporation

10 . Hardware Information. Circuit Diagram _EXT R R 70k 7k U SN7LVCG08 B R7 680 D PGC VF=.9V at ma... JP HWP-P SW SKRAAKE00 U C OUT 0.uF S-000N-NTG GND C 0.uF VCC J #RESET_IN #RESET_OUT TEST IREF_M HIFFB-0DA-.DSA(7) CN- C 0.uF C.7uF B C 0.uF C6.7uF C C7 8pF X C8 8pF C9 0.uF C 0.uF X uf C R 0 MA-06 MC-6 J CN- DCLK GND DSIO DST A-PA C8 C9 0uF 0.uF LC--G JP6 R 0k HWP-P R6 0k... TP TP _EXT J P00/SIN0 7 6 P0/SOUT0 P0/SCLK0/FOUTA/REGMON 0 P0/EXCL0/REGMON/LFRO 9 8 P0/TOUTA0/CAPA0 7 6 P0/TOUTB0/CAPB0/#SPISS0 P06/BZ/SDI0 0 P07/#BZ/SDO0 9 8 P0/FOUTB/SPICLK0 7 6 DCLK/P/BZ DSIO/P/#BZ 0 DST/P HIFFB-0DA-.DSA(7) CN- C 0.uF C.7uF C0.7uF R C uf 0.uF C 0.uF #RESET 6 TEST OSC OSC VDA 0 OSC 9 OSC 8 VOSC 7 IREF_M 6 P00/SIN0 P0/SOUT0 P0/SCLK0/FOUTA/REGMON P0/EXCL0/REGMON/LFRO P0/TOUTA0/CAPA0 P0/TOUTB0/CAPB0/#SPISS0 P06/BZ/SDI0 P07/#BZ/SDO0 P0/FOUTB/SPICLK0 DCLK/P/BZ DSIO/P/#BZ DST/P U IC ( SC76 ) SEG9 SEG8 SEG7 SEG6 SEG SEG SEG SEG SEG SEG0 SEG9 SEG8 SEG7 C6 0.uF C 0.uF C 0.uF C7 0.uF JP HWP-P... JP HWP-P... JP HWP-P... A J CN- GND RESET VCCIN CA CB VC VC VC COM0 COM COM COM SEG0 SEG SEG SEG SEG SEG SEG J VC 7 VC 9 VC COM0 COM 7 COM 9 COM SEG0 SEG 7 SEG 9 SEG SEG SEG 7 SEG6 9 HIFFB-0DA-.DSA(7) C 0.uF C6.7uF CN- A S0B-PASK- J7 CN GND SB-XH-A(LF)(SN) C 0.uF C 0uF _EXT GND TP C7.7uF C8 0.uF JP HWP-P... CN- J SEG9 6 SEG8 SEG7 0 9 SEG6 8 7 SEG 6 SEG SEG 0 9 SEG 8 7 SEG 6 SEG0 SEG9 0 9 SEG8 8 7 SEG7 6 HIFFB-0DA-.DSA(7) C 0.uF C.7uF Title SVTmini76 Size Document Number Rev C SVTmini76_CPU_board_sc h. Tuesday, January 8, 0 Date Sheet of 6 Seiko Epson Corporation SUC76T Manual

11 . Hardware Information. Components List Description Capacitor Capacitor Table.. SUC76T Components list (mounted parts) * Location Model no. / specifications Qty Manufacturer C,C,C,C,C9,C, C608JBH0K 8 TDK CORPORATION C,C,C,C6, 0.μF, 0V,608,JB C7,C9,C,C, C,C8,C,C C,C6,C0,C,C6, CJBH7K 7 TDK CORPORATION C7,C.7μF, 0V,JB TDK CORPORATION 8pF, 0V,608,CH TDK CORPORATION μf, 0V,JB TDK CORPORATION 0μF, V,JB STANLAY ELECTRIC Green CO., LTD JP,JP,JP,JP,JP, HWP-P 6 Mac-Eight Co.,Ltd. JP6 pin J A-PA-.DS(7) HIROSE ELECTRIC pin CO., LTD. J S0B-PASK- JST Mfg. Co., Ltd. pin JST Mfg. Co., Ltd. pin KOA CORPORATION 70kΩ, KOA CORPORATION 7kΩ, KOA CORPORATION 0Ω KOA CORPORATION 0kΩ, KOA CORPORATION Ω, KOA CORPORATION 680Ω, ALPS ELECTRIC Surface mount CO., LTD. Mac-Eight Co.,Ltd. Red, φ.0mm Texas Instruments SOT(SC-70)-DCK Incorporated Capacitor C7,C8 C608CHH80J Capacitor C,C C6JBH0K Capacitor C,C8 CJBE06K LED D PGC Checkpin Connector CN- Connector CN- Connector CN J7 SB-XH-A(LF)(SN) Resistor R RK7HATTD70F Resistor R RK7HATTD70F Resistor R RK7ZETTP(00) Resistor R6,R RK7HATTD00F Resistor R RK7HATTDR0F Resistor R7 RK7HATTD6800F Tact switch SW SKRAAKE00 Checkpin TP LC--G-Red IC U SN7LVCG08DCK IC U S-000N-NTG Seiko Instruments Inc. IC socket U IC Yamaichi Electronics Co., Ltd. Crystal oscillator X MA-06 (CL=6pF) EPSON TOYOCOM CORPORATION Crystal oscillator X MC-6 (CL=9pF) EPSON TOYOCOM CORPORATION 8 Seiko Epson Corporation SUC76T Manual

12 . Hardware Information Table.. SUC76T Components list (installed or included parts) * Description Location Model no. / specifications Qty Manufacturer Jumper Switch Installed JS- 6 Mac-Eight Co.,Ltd. IC Installed SEIKO EPSON SC76 CORPORATION Spacer clamping screw Installed FB-00N Wilco Spacer Installed HIROSUGI-KEIKI ASB-E Co., Ltd. Power supply cable connector Included XHP-, Housing JST Mfg. Co., Ltd. BXH-00T-P0.6, Contact JST Mfg. Co., Ltd. SHINAGAWA AWM007/TR-6, Wire ELECTRIC WIRE AWG#, Length0cm CO.,LTD * The parts are subject to change without notice. SUC76T Manual Seiko Epson Corporation 9

13 Revision History Revision History Code No. Page Contents 700 All Newly established Attachment- 0 Seiko Epson Corporation SUC76T Manual

14 International Sales Operations AMERICA EPSON ELECTRONICS AMERICA, I. 80 Orchard Parkway, San Jose, CA 9, USA Phone FAX EUROPE EPSON EUROPE ELECTRONICS GmbH Riesstrasse, 8099 Munich, GERMANY Phone FAX ASIA EPSON (CHINA) CO., LTD. 7F, Jinbao Bldg., No.89 Jinbao St., Dongcheng District, Beijing 0000, CHINA Phone FAX SHANGHAI BRAH 7F, Block B, Hi-Tech Bldg., 900 Yishan Road, Shanghai 00, CHINA Phone FAX SHENZHEN BRAH F, Dawning Mansion, Keji South th Road, Hi-Tech Park, Shenzhen 807, CHINA Phone FAX EPSON HONG KONG LTD. Unit 7-7, 7/F Trade Square, 68 Cheung Sha Wan Road, Kowloon, Hong Kong. Phone FAX EPSON TAIWAN TECHNOLOGY & TRADING LTD. F, No. 7, Song Ren Road, Taipei 0, TAIWAN Phone FAX EPSON SINGAPORE PTE., LTD. HarbourFront Place, #0-0 HarbourFront Tower One, Singapore 0986 Phone FAX SEIKO EPSON CORP. KOREA OFFICE F, KLI 6 Bldg., 60 Yoido-dong, Youngdeungpo-Ku, Seoul 0-76, KOREA Phone FAX SEIKO EPSON CORP. MICRODEVICES OPERATIONS DIVISION Device Sales & Marketing Dept. -8, Hino, Hino-shi, Tokyo 9-80, JAPAN Phone FAX Document Code 700 First Issue May 0 in JAPAN H