PCB Racks. PCB Assembly and Handling products

Size: px

Start display at page:

Download "PCB Racks. PCB Assembly and Handling products"

Hubert Patrick
5 years ago
Views:

1 PCB Racks PCB Assembly and Handling products

PCB Racks & Accessories Overview Fancort is best known for our PCB Assembly and Handling products with one of the largest selections of ES-safe PCB storage and handling racks in a variety of models

2 PCB Racks & Accessories Overview Fancort is best known for our PCB Assembly and Handling products with one of the largest selections of ES-safe PCB storage and handling racks in a variety of models for different board sizes and applications. e also offer a variety of PCB assembly accessories including PCB Cleaning Baskets, Coplanarity Inspection irror and ES Turntable. FREE SHIPPIN ON ALL ORER OF $0 AN ORE odel RA- - esigned for boards that require a large full slot. - Tolerates most chemicals and 3F. - easures " x 6" with 25 slots that measure.10" x.333" on a.0" pitch; weighs 1.7 lbs. - Undercut ends for carrying, and drainage holes. - esigned for baking and chemical resistance. - Non ES model #RA-. - NE! ouble wide #RA- or #RA-C (ES safe) for large panels. - ES model #RA-C tolerates 3 F. odel RA-1 - easures 6" x 1", weighs.5 lb slots with parallel sides for more rigid holding, measure.125" x.300 on a.625" pitch. - ouble wide models expand to hold boards up to 24" wide with a carrying handle; measures " x 1"L. odel #RA-1C. - High temp conductive model and very high temp for bare board processing tolerates acids, alkalines and solvents (non-es). - New green static dissipative model for lead-free boards, RA-1S - RA-1S Rack aterial Specifications - New clean room model is permanently static dissipative, RA-1CL. - New odel for thin boards and boards with parts near the edge, slot size.075" x.125" on a.0" pitch

PCB Racks & Accessories RA-1C RA-1CT RA-1HT RA-1C RA-1CT RA-1HT KAU- RA-1C/ST RA-1CL RA-1S Standard Conductive (ºF)

Temp ouble ide, Very High Temp. Aluminum s to Hold Two RA-1 For those boards with components near the edge; slot size.

0" pitch Clean room material and static-dissipative reen static dissipative material for lead-free boards odel RA- -

- Open carrying handles and stackable. - Optional low cost non-es model. - Tolerates F.

3 PCB Racks & Accessories RA-1C RA-1CT RA-1HT RA-1C RA-1CT RA-1HT KAU- RA-1C/ST RA-1CL RA-1S Standard Conductive (ºF) High Temp Conductive (275ºF) Very High Temp Polysulfone (275ºF) Non-ES ouble ide Conductive ouble ide Conductive High Temp ouble ide, Very High Temp. Aluminum s to Hold Two RA-1 For those boards with components near the edge; slot size.075" x.125" on.0" pitch Clean room material and static-dissipative reen static dissipative material for lead-free boards odel RA- - easures 7" x ", weighs 2 lbs. - slots with easy-to-load angle,.125" x.325 on a.7" pitch. - Open carrying handles and stackable. - Optional low cost non-es model. - Tolerates F. - New green static-dissipative model RA-S. odel RA-24 - easures 3/ x slots with easy-to-load angle,.125" x.325 on a 1.000" pitch. - Rugged construction with heavy reinforcing ribs. - Open carrying handles and stackable with similar models. - olded in reinforced material that tolerates F.

PCB Racks & Accessories Angle Rack odel PCBH - Holds boards on two contiguous edges. - Two models for small and large boards. - Stackable when not in use.

0 Adjustable Racks: Karry-All odel 76 - Small to medium boards. - 39 numbered slots measure.135" x.135" on a.260" pitch. - Easy board insertion with offset ribs.

- " deep models can be used horizontally without legs. - Optional carrying handle. odel No.

4 PCB Racks & Accessories Angle Rack odel PCBH - Holds boards on two contiguous edges. - Two models for small and large boards. - Stackable when not in use. - rainage holes for use in cleaners. odel No. PCBH-2L-C PCBH-C Outside im. x 10 x 5 10 x x 4 #Slots Slot Size/in..100 x x.0 Adjustable Racks: Karry-All odel 76 - Small to medium boards numbered slots measure.135" x.135" on a.260" pitch. - Easy board insertion with offset ribs. - Thumb screws for tool-free adjustment. - Add additional card guides to create multiple sections. - Optional leg brackets for horizontal storage of 4" deep models. - " deep models can be used horizontally without legs. - Optional carrying handle. odel No CP 76--CP 76--4CP 76--CP 76--4CP 76--CP 77-4CP 77-CP KAU- KAU- KAU- KAU-72 Carrying Handle Legs For Horizontal Storage Thumb Screw Overall Imensions L Card uide Card uide Board Capacity long x 4 deep long x deep 9" Long " Long 21" Long 72" Long KAH-2 KAL

Adjustable Racks Karry-All odel 79 - edium boards and hard-to-hold edges. - Unique double slots measure.125" x.125" inside a.600" x.

- Horizontal storage with optional leg brackets (KAL-2) for 5" deep model. - 11" deep models need no brackets for horizontal storage.

79--5CP 79--5CP 79--11CP 79--5CP 79--11CP 79--11CP 79-5CP 79-11CP KAU-9 KAU- KAU-21 Carrying Handle Legs For Horizontal Storage Thumb Screw Overall

25 long x 11 deep 9" Long " Long 21" Long KAH-2 KAL-1 7-1 Karry-All odel 0 - For medium to large boards. - Card guides are 12.

5 Adjustable Racks Karry-All odel 79 - edium boards and hard-to-hold edges. - Unique double slots measure.125" x.125" inside a.600" x.0" slot for boards with components on the edges. - 1 slots on a pitch of.700". - odel 79-B-5 fits a standard 17" x 21" tote box. - Horizontal storage with optional leg brackets (KAL-2) for 5" deep model. - 11" deep models need no brackets for horizontal storage. - Optional carrying handle. odel No CP 79--5CP CP 79--5CP CP CP 79-5CP 79-11CP KAU-9 KAU- KAU-21 Carrying Handle Legs For Horizontal Storage Thumb Screw Overall Imensions L Card uide Card uide Board Capacity.25 long x 5.5 deep.25 long x 11 deep 9" Long " Long 21" Long KAH-2 KAL Karry-All odel 0 - For medium to large boards. - Card guides are 12.5" deep; optional 1" and 24" guides for very large boards numbered slots measure.110" x.5" on a.210" pitch. - Easy board insertion with offset ribs. - Steel stiffeners and molded ribbing prevent flexing of card guides. - Each locking thumb screws. odel No Overall Imensions 26 L Board Capacity

Adjustable Racks agazine Rack B Series - ear adjusting card guides on some models to monitor parallelism and simplify set-up. - etal top and bottom on some models.

- Removeable end stop. - Slot size is 5mm (.196"). - Carrying handles on top and bottom. - Assembly Instructions. Transport olly - ES materials. - Two locking casters.

6 Adjustable Racks agazine Rack B Series - ear adjusting card guides on some models to monitor parallelism and simplify set-up. - etal top and bottom on some models. - Zero flexing of card guides with steel reinforcing supports and molded ribs. - Standard ABS model (N) tolerates 60ºC, plus optional models to 1ºC. - Surface resistivity of 10-4 to 10-6 ohm/cm. - Removeable end stop. - Slot size is 5mm (.196"). - Carrying handles on top and bottom. - Assembly Instructions. Transport olly - ES materials. - Two locking casters. - Holds two B series magazine racks side by side. - rag chain for ES protection. odel No. Adjustments ethod Top & Buttom idth (mm) Length (mm) Height (mm) in. PCB easure ax. PCB easure Ref Position PCB Capacity B0103N B0103N B0104N S B0105PN P B0106N B0107N S B010N B0109N B0111 S

ES Production Accessories ES Turntable - Ideal for assembly or rework on heavy or awkward mechanical assemblies. - ES safe for use with electrical assemblies.

odel 300 odel 30 odel 0 Three sizes available: 12" dia. x 1/2" height " dia.

05" thick ES safe plastic with surface resistivity below 10 (to the 6th power) Ω and temperature tolerance to 60ºC. Rectangular trays in various sizes for storing and transporting assemblies.

75 x.375 x 1.375.125 x 11.5 x.75 17 x 11 x 2.375 16.375 x 12.5 x 2.25 Removable grid creates 70 cells measuring 1." x 1.". rid P/N S-Q12, if purchased separately. S-Q12 P/N S-Q12 Outside imension 1.

7 ES Production Accessories ES Turntable - Ideal for assembly or rework on heavy or awkward mechanical assemblies. - ES safe for use with electrical assemblies. - Surface material is conductive rubber; disc material is durable plastic. - Surface resistivity of 5 x 10e6 Volume resistivity of 1x10e7. - eight capacity of 0 lbs. for 30. odel 300 odel 30 odel 0 Three sizes available: 12" dia. x 1/2" height " dia. x 1/2" height " dia. x 5/" height ES Component Trays Store and ship components and assemblies in these economical, stackable, rugged reinforced trays molded in.05" thick ES safe plastic with surface resistivity below 10 (to the 6th power) Ω and temperature tolerance to 60ºC. Rectangular trays in various sizes for storing and transporting assemblies. S-Q11 P/N S-Q11.1 S-Q11.2 S-Q11.3 S-Q11.4 S-Q11.5 Outside imension.75" x 6.5" x " x.75" x " x 12.25" x " x 11.5" x " x 13" x 2.75 Inside imension.6 x x x.375 x x 11.5 x x 11 x x 12.5 x 2.25 Removable grid creates 70 cells measuring 1." x 1.". rid P/N S-Q12, if purchased separately. S-Q12 P/N S-Q12 Outside imension 1.4" x 12.52" x 1.6 Inside imension 16.5 x 1.5 x 1.16 Removable grid creates 70 cells measuring 1." x 1.". rid P/N S-Q12, if purchased separately. Single cavity with slots for dividers to create cavities 2-7/" or 3-3/4" x 4.52". Lip on front and back for hanging on a rack. S-Q13 P/N S-Q13 Outside imension 13.6" x 4.92" x 2.00 Inside imension x 4.4 x 1.4 Four slots for dividers to create cavities 2-7/" or 3-3/4" in length; Optional ividers P/N S-Q13 Three trays with permanently molded partitions to create cavities for your assemblies. S-Q P/N S-Q.1 S-Q.2 S-Q.3 Outside imension 13-1/4" x 13-3/4" x 1-5/" 12-1/2" x 11-1/2" x 1-3/4" 11-3/" x 12-3/" x 1" Ten Cells easuring 6-5/" x 2-1/2" x 1-3/" 5-3/" x 2-1/4" x 1-1/2" 5-3/" x 2-1/4" x 1/2"

31 Fairfield Place est Caldwell, NJ 07006

8 31 Fairfield Place est Caldwell, NJ (P) 1..FANCORT (P)

In-Plant Handlers. Web Site: Phone: East Coast (781) Fax: (909)

In-Plant Handlers. Web Site: Phone: East Coast (781) Fax: (909) In-Plant Handlers Part# REF# Cell Size - x x # of Cells Handles # of ong ong # of Short Short Storage Partitions Partitions Partitions Partitions Container id ire Foam 37233**/*** 422-09V07-60 2-1/2 x