Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10
|
|
|
- Jonah Higgins
- 5 years ago
- Views:
Transcription
1 Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10 [] Features <>Flux-resistant construction with integrally molded s. <>4 variations with low operating force (0.25N) to high operating force (1.47N). <> Lead wire,pc board,#110 Quick-connect,PC board Right/Left angle are available. <>UL,CSA.. (C-UL) approved. File No. : E90211 <>TUV approved. <>Contact gap is more than 1mm. [] Applications <>Door inter-look switch office equipments ( Printer, Copy machine and so on) Actual size [] Products No. system
2 MQS-54AS Series 2/10 [] UL,CSA(C-UL), TUV Ratings Contacts Operating force code UL,CSA(C-UL) Ratings TUV Ratings Silver alloy contact type 1 type 0.1A 30V DC 3, 5, 7 type 3A 250V AC / 3A 30V DC 3A 250V AC / 3A 30V DC Gold clad triple layer contact type 1, 3, 5, 7 type 0.1A 125V AC / 0.1A 30V DC 0.1A 30V DC Please see the approved standard list. [] Typical Specifications Item Specifications Contact Silver alloy contact type Gold clad twin/triple layer contact type Operating force (Pin plunger type) MAX 0.50N (50gf) MAX 0.98N (100gf) MAX 1.96N (200gf) MAX 2.94N (300gf) MAX 0.50N (50gf) MAX 0.98N (100gf) MAX 1.96N (200gf) MAX 2.94N (300gf) Ratings (Resistive load) 0.1A 125V AC 0.1A 30V DC 3A 125V AC 3A 30V DC 0.1A 125V AC 0.1A 30V DC Mechanical life Electrical life 100,000 cycles 100,000 cycles 50,000 cycles 100,000 cycles Contact resistance (Initial) MAX 500 milliohm MAX 30 milliohm MAX 500 milliohm MAX 100 milliohm Insulation Resistance Withstanding voltage Resistibility to vibration (Pin plunger type) Resistibility to shock (Pin plunger type) Allowable operating speed (at no load) Max. operating cycle rate (at no load) Operating temperature range Ambient humidity MIN 100 megohm 500V DC Between open contacts Between each and non live metal part Between each and each : 1000V AC 1min : 1500V AC 1min : 1500V AC 1min double amplitude : 1.5mm, frequency : 10 to 55Hz Each direction Open contact shall be less than 1 ms at the above conditions. 5G 15G 30G 5G 15G 30G Open contact shall be less than 1 ms at the above conditions. 1 to 500 mm/sec. 120 times/min. -20 to +70 degree Celsius MAX 85%RH [] Range of current Contacts specification Range of current Operating force (MAX) (Pin plunger type) 1mA 10mA 100mA 3A 0.25N(25gf) 0.49N(50gf) 0.98N(100gf) 1.47N(150gf) Silver alloy Gold clad triple layer Gold clad twin layer
3 MQS-54AS Series 3/10 [] Products line <>Silver alloy contact type Actuator No *Approved standard Lead wire #110 Quick connect PC board Right angle PC board Left angle Operating PC board force (MAX) C-UL TUV Products No. Products No. Products No. Products No. Products No. 0.49N - 3 MQS-54AS-1 MQS-54AS-1-P MQS-54AS-1-F MQS-54AS-1-PR MQS-54AS-1-PL Pin plunger type (Blank) N 1 1 MQS-54AS-3 MQS-54AS-3-P MQS-54AS-3-F MQS-54AS-3-PR MQS-54AS-3-PL 1.96N 1 1 MQS-54AS-5 MQS-54AS-5-P MQS-54AS-5-F MQS-54AS-5-PR MQS-54AS-5-PL 2.94N 1 1 MQS-54AS-7 MQS-54AS-7-P MQS-54AS-7-F MQS-54AS-7-PR MQS-54AS-7-PL 0.20N - 3 MQS-54AS-1L1 MQS-54AS-1L1-P MQS-54AS-1L1-F MQS-54AS-1L1-PR MQS-54AS-1L1-PL short (L1) N 1 1 MQS-54AS-3L1 MQS-54AS-3L1-P MQS-54AS-3L1-F MQS-54AS-3L1-PR MQS-54AS-3L1-PL 0.78N 1 1 MQS-54AS-5L1 MQS-54AS-5L1-P MQS-54AS-5L1-F MQS-54AS-5L1-PR MQS-54AS-5L1-PL 1.18N 1 1 MQS-54AS-7L1 MQS-54AS-7L1-P MQS-54AS-7L1-F MQS-54AS-7L1-PR MQS-54AS-7L1-PL 0.16N - 3 MQS-54AS-1L MQS-54AS-1L-P MQS-54AS-1L-F MQS-54AS-1L-PR MQS-54AS-1L-PL (L) N 1 1 MQS-54AS-3L MQS-54AS-3L-P MQS-54AS-3L-F MQS-54AS-3L-PR MQS-54AS-3L-PL 0.69N 1 1 MQS-54AS-5L MQS-54AS-5L-P MQS-54AS-5L-F MQS-54AS-5L-PR MQS-54AS-5L-PL 1.08N 1 1 MQS-54AS-7L MQS-54AS-7L-P MQS-54AS-7L-F MQS-54AS-7L-PR MQS-54AS-7L-PL long (L2) N 1 1 MQS-54AS-3L2 MQS-54AS-3L2-P MQS-54AS-3L2-F MQS-54AS-3L2-PR MQS-54AS-3L2-PL 0.49N 1 1 MQS-54AS-5L2 MQS-54AS-5L2-P MQS-54AS-5L2-F MQS-54AS-5L2-PR MQS-54AS-5L2-PL 0.88N 1 1 MQS-54AS-7L2 MQS-54AS-7L2-P MQS-54AS-7L2-F MQS-54AS-7L2-PR MQS-54AS-7L2-PL long (L3) N 1 1 MQS-54AS-3L3 MQS-54AS-3L3-P MQS-54AS-3L3-F MQS-54AS-3L3-PR MQS-54AS-3L3-PL 0.39N 1 1 MQS-54AS-5L3 MQS-54AS-5L3-P MQS-54AS-5L3-F MQS-54AS-5L3-PR MQS-54AS-5L3-PL 0.69N 1 1 MQS-54AS-7L3 MQS-54AS-7L3-P MQS-54AS-7L3-F MQS-54AS-7L3-PR MQS-54AS-7L3-PL 0.16N - 3 MQS-54AS-1D MQS-54AS-1D-P MQS-54AS-1D-F MQS-54AS-1D-PR MQS-54AS-1D-PL R2.5 (D) N 1 1 MQS-54AS-3D MQS-54AS-3D-P MQS-54AS-3D-F MQS-54AS-3D-PR MQS-54AS-3D-PL 0.69N 1 1 MQS-54AS-5D MQS-54AS-5D-P MQS-54AS-5D-F MQS-54AS-5D-PR MQS-54AS-5D-PL 1.08N 1 1 MQS-54AS-7D MQS-54AS-7D-P MQS-54AS-7D-F MQS-54AS-7D-PR MQS-54AS-7D-PL 0.16N - 3 MQS-54AS-1D3 MQS-54AS-1D3-P MQS-54AS-1D3-F MQS-54AS-1D3-PR MQS-54AS-1D3-PL R1.3 (D3) N 1 1 MQS-54AS-3D3 MQS-54AS-3D3-P MQS-54AS-3D3-F MQS-54AS-3D3-PR MQS-54AS-3D3-PL 0.69N 1 1 MQS-54AS-5D3 MQS-54AS-5D3-P MQS-54AS-5D3-F MQS-54AS-5D3-PR MQS-54AS-5D3-PL 1.08N 1 1 MQS-54AS-7D3 MQS-54AS-7D3-P MQS-54AS-7D3-F MQS-54AS-7D3-PR MQS-54AS-7D3-PL 0.20N - 3 MQS-54AS-1D2 MQS-54AS-1D2-P MQS-54AS-1D2-F MQS-54AS-1D2-PR MQS-54AS-1D2-PL roller (D2) N 1 1 MQS-54AS-3D2 MQS-54AS-3D2-P MQS-54AS-3D2-F MQS-54AS-3D2-PR MQS-54AS-3D2-PL 0.78N 1 1 MQS-54AS-5D2 MQS-54AS-5D2-P MQS-54AS-5D2-F MQS-54AS-5D2-PR MQS-54AS-5D2-PL 1.18N 1 1 MQS-54AS-7D2 MQS-54AS-7D2-P MQS-54AS-7D2-F MQS-54AS-7D2-PR MQS-54AS-7D2-PL * The number represents ratings. 1 : 3A 250V AC / 3A 30V DC 2 : 0.1A 125V AC / 0.1A 30V DC 3 : 0.1A 30V DC
4 MQS-54AS Series 4/10 <>Gold clad triple layer contact type Actuator No *Approved standard Lead wire #110 Quick connect PC board Right angle PC board Left angle Operating PC board force (MAX) C-UL TUV Products No. Products No. Products No. Products No. Products No. 0.49N 2 3 MQS-54AS-1AU MQS-54AS-1AU-P MQS-54AS-1AU-F MQS-54AS-1AU-PR MQS-54AS-1AU-PL Pin plunger type (Blank) N 2 3 MQS-54AS-3AU MQS-54AS-3AU-P MQS-54AS-3AU-F MQS-54AS-3AU-PR MQS-54AS-3AU-PL 1.96N 2 3 MQS-54AS-5AU MQS-54AS-5AU-P MQS-54AS-5AU-F MQS-54AS-5AU-PR MQS-54AS-5AU-PL 2.94N 2 3 MQS-54AS-7AU MQS-54AS-7AU-P MQS-54AS-7AU-F MQS-54AS-7AU-PR MQS-54AS-7AU-PL 0.20N 2 3 MQS-54AS-1L1AU MQS-54AS-1L1AU-P MQS-54AS-1L1AU-F MQS-54AS-1L1AU-PR MQS-54AS-1L1AU-PL short (L1) N 2 3 MQS-54AS-3L1AU MQS-54AS-3L1AU-P MQS-54AS-3L1AU-F MQS-54AS-3L1AU-PR MQS-54AS-3L1AU-PL 0.78N 2 3 MQS-54AS-5L1AU MQS-54AS-5L1AU-P MQS-54AS-5L1AU-F MQS-54AS-5L1AU-PR MQS-54AS-5L1AU-PL 1.18N 2 3 MQS-54AS-7L1AU MQS-54AS-7L1AU-P MQS-54AS-7L1AU-F MQS-54AS-7L1AU-PR MQS-54AS-7L1AU-PL 0.16N 2 3 MQS-54AS-1LAU MQS-54AS-1LAU-P MQS-54AS-1LAU-F MQS-54AS-1LAU-PR MQS-54AS-1LAU-PL (L) N 2 3 MQS-54AS-3LAU MQS-54AS-3LAU-P MQS-54AS-3LAU-F MQS-54AS-3LAU-PR MQS-54AS-3LAU-PL 0.69N 2 3 MQS-54AS-5LAU MQS-54AS-5LAU-P MQS-54AS-5LAU-F MQS-54AS-5LAU-PR MQS-54AS-5LAU-PL 1.08N 2 3 MQS-54AS-7LAU MQS-54AS-7LAU-P MQS-54AS-7LAU-F MQS-54AS-7LAU-PR MQS-54AS-7LAU-PL long (L2) N 2 3 MQS-54AS-3L2AU MQS-54AS-3L2AU-P MQS-54AS-3L2AU-F MQS-54AS-3L2AU-PR MQS-54AS-3L2AU-PL 0.49N 2 3 MQS-54AS-5L2AU MQS-54AS-5L2AU-P MQS-54AS-5L2AU-F MQS-54AS-5L2AU-PR MQS-54AS-5L2AU-PL 0.88N 2 3 MQS-54AS-7L2AU MQS-54AS-7L2AU-P MQS-54AS-7L2AU-F MQS-54AS-7L2AU-PR MQS-54AS-7L2AU-PL long (L3) N 2 3 MQS-54AS-3L3AU MQS-54AS-3L3AU-P MQS-54AS-3L3AU-F MQS-54AS-3L3AU-PR MQS-54AS-3L3AU-PL 0.39N 2 3 MQS-54AS-5L3AU MQS-54AS-5L3AU-P MQS-54AS-5L3AU-F MQS-54AS-5L3AU-PR MQS-54AS-5L3AU-PL 0.69N 2 3 MQS-54AS-7L3AU MQS-54AS-7L3AU-P MQS-54AS-7L3AU-F MQS-54AS-7L3AU-PR MQS-54AS-7L3AU-PL 0.16N 2 3 MQS-54AS-1DAU MQS-54AS-1DAU-P MQS-54AS-1DAU-F MQS-54AS-1DAU-PR MQS-54AS-1DAU-PL R2.5 (D) N 2 3 MQS-54AS-3DAU MQS-54AS-3DAU-P MQS-54AS-3DAU-F MQS-54AS-3DAU-PR MQS-54AS-3DAU-PL 0.69N 2 3 MQS-54AS-5DAU MQS-54AS-5DAU-P MQS-54AS-5DAU-F MQS-54AS-5DAU-PR MQS-54AS-5DAU-PL 1.08N 2 3 MQS-54AS-7DAU MQS-54AS-7DAU-P MQS-54AS-7DAU-F MQS-54AS-7DAU-PR MQS-54AS-7DAU-PL 0.16N 2 3 MQS-54AS-1D3AU MQS-54AS-1D3AU-P MQS-54AS-1D3AU-F MQS-54AS-1D3AU-PR MQS-54AS-1D3AU-PL R1.3 (D3) N 2 3 MQS-54AS-3D3AU MQS-54AS-3D3AU-P MQS-54AS-3D3AU-F MQS-54AS-3D3AU-PR MQS-54AS-3D3AU-PL 0.69N 2 3 MQS-54AS-5D3AU MQS-54AS-5D3AU-P MQS-54AS-5D3AU-F MQS-54AS-5D3AU-PR MQS-54AS-5D3AU-PL 1.08N 2 3 MQS-54AS-7D3AU MQS-54AS-7D3AU-P MQS-54AS-7D3AU-F MQS-54AS-7D3AU-PR MQS-54AS-7D3AU-PL 0.20N 2 3 MQS-54AS-1D2AU MQS-54AS-1D2AU-P MQS-54AS-1D2AU-F MQS-54AS-1D2AU-PR MQS-54AS-1D2AU-PL roller (D2) N 2 3 MQS-54AS-3D2AU MQS-54AS-3D2AU-P MQS-54AS-3D2AU-F MQS-54AS-3D2AU-PR MQS-54AS-3D2AU-PL 0.78N 2 3 MQS-54AS-5D2AU MQS-54AS-5D2AU-P MQS-54AS-5D2AU-F MQS-54AS-5D2AU-PR MQS-54AS-5D2AU-PL 1.18N 2 3 MQS-54AS-7D2AU MQS-54AS-7D2AU-P MQS-54AS-7D2AU-F MQS-54AS-7D2AU-PR MQS-54AS-7D2AU-PL * The number represents ratings. 1 : 3A 250V AC / 3A 30V DC 2 : 0.1A 125V AC / 0.1A 30V DC 3 : 0.1A 30V DC
5 MQS-54AS Series 5/10 <>Gold clad twin layer contact type Actuator No *Approved standard Lead wire #110 Quick connect PC board Right angle PC board Left angle Operating PC board force (MAX) C-UL TUV Products No. Products No. Products No. Products No. Products No. 0.49N - - MQS-54AS-1U2 MQS-54AS-1U2-P MQS-54AS-1U2-F MQS-54AS-1U2-PR MQS-54AS-1U2-PL Pin plunger type (Blank) N - - MQS-54AS-3U2 MQS-54AS-3U2-P MQS-54AS-3U2-F MQS-54AS-3U2-PR MQS-54AS-3U2-PL 1.96N - - MQS-54AS-5U2 MQS-54AS-5U2-P MQS-54AS-5U2-F MQS-54AS-5U2-PR MQS-54AS-5U2-PL 2.94N - - MQS-54AS-7U2 MQS-54AS-7U2-P MQS-54AS-7U2-F MQS-54AS-7U2-PR MQS-54AS-7U2-PL 0.20N - - MQS-54AS-1L1U2 MQS-54AS-1L1U2-P MQS-54AS-1L1U2-F MQS-54AS-1L1U2-PR MQS-54AS-1L1U2-PL short (L1) N - - MQS-54AS-3L1U2 MQS-54AS-3L1U2-P MQS-54AS-3L1U2-F MQS-54AS-3L1U2-PR MQS-54AS-3L1U2-PL 0.78N - - MQS-54AS-5L1U2 MQS-54AS-5L1U2-P MQS-54AS-5L1U2-F MQS-54AS-5L1U2-PR MQS-54AS-5L1U2-PL 1.18N - - MQS-54AS-7L1U2 MQS-54AS-7L1U2-P MQS-54AS-7L1U2-F MQS-54AS-7L1U2-PR MQS-54AS-7L1U2-PL 0.16N - - MQS-54AS-1LU2 MQS-54AS-1LU2-P MQS-54AS-1LU2-F MQS-54AS-1LU2-PR MQS-54AS-1LU2-PL (L) N - - MQS-54AS-3LU2 MQS-54AS-3LU2-P MQS-54AS-3LU2-F MQS-54AS-3LU2-PR MQS-54AS-3LU2-PL 0.69N - - MQS-54AS-5LU2 MQS-54AS-5LU2-P MQS-54AS-5LU2-F MQS-54AS-5LU2-PR MQS-54AS-5LU2-PL 1.08N - - MQS-54AS-7LU2 MQS-54AS-7LU2-P MQS-54AS-7LU2-F MQS-54AS-7LU2-PR MQS-54AS-7LU2-PL long (L2) N - - MQS-54AS-3L2U2 MQS-54AS-3L2U2-P MQS-54AS-3L2U2-F MQS-54AS-3L2U2-PR MQS-54AS-3L2U2-PL 0.49N - - MQS-54AS-5L2U2 MQS-54AS-5L2U2-P MQS-54AS-5L2U2-F MQS-54AS-5L2U2-PR MQS-54AS-5L2U2-PL 0.88N - - MQS-54AS-7L2U2 MQS-54AS-7L2U2-P MQS-54AS-7L2U2-F MQS-54AS-7L2U2-PR MQS-54AS-7L2U2-PL long (L3) N - - MQS-54AS-3L3U2 MQS-54AS-3L3U2-P MQS-54AS-3L3U2-F MQS-54AS-3L3U2-PR MQS-54AS-3L3U2-PL 0.39N - - MQS-54AS-5L3U2 MQS-54AS-5L3U2-P MQS-54AS-5L3U2-F MQS-54AS-5L3U2-PR MQS-54AS-5L3U2-PL 0.69N - - MQS-54AS-7L3U2 MQS-54AS-7L3U2-P MQS-54AS-7L3U2-F MQS-54AS-7L3U2-PR MQS-54AS-7L3U2-PL 0.16N - - MQS-54AS-1DU2 MQS-54AS-1DU2-P MQS-54AS-1DU2-F MQS-54AS-1DU2-PR MQS-54AS-1DU2-PL R2.5 (D) N - - MQS-54AS-3DU2 MQS-54AS-3DU2-P MQS-54AS-3DU2-F MQS-54AS-3DU2-PR MQS-54AS-3DU2-PL 0.69N - - MQS-54AS-5DU2 MQS-54AS-5DU2-P MQS-54AS-5DU2-F MQS-54AS-5DU2-PR MQS-54AS-5DU2-PL 1.08N - - MQS-54AS-7DU2 MQS-54AS-7DU2-P MQS-54AS-7DU2-F MQS-54AS-7DU2-PR MQS-54AS-7DU2-PL 0.16N - - MQS-54AS-1D3U2 MQS-54AS-1D3U2-P MQS-54AS-1D3U2-F MQS-54AS-1D3U2-PR MQS-54AS-1D3U2-PL R1.3 (D3) N - - MQS-54AS-3D3U2 MQS-54AS-3D3U2-P MQS-54AS-3D3U2-F MQS-54AS-3D3U2-PR MQS-54AS-3D3U2-PL 0.69N - - MQS-54AS-5D3U2 MQS-54AS-5D3U2-P MQS-54AS-5D3U2-F MQS-54AS-5D3U2-PR MQS-54AS-5D3U2-PL 1.08N - - MQS-54AS-7D3U2 MQS-54AS-7D3U2-P MQS-54AS-7D3U2-F MQS-54AS-7D3U2-PR MQS-54AS-7D3U2-PL 0.20N - - MQS-54AS-1D2U2 MQS-54AS-1D2U2-P MQS-54AS-1D2U2-F MQS-54AS-1D2U2-PR MQS-54AS-1D2U2-PL roller (D2) N - - MQS-54AS-3D2U2 MQS-54AS-3D2U2-P MQS-54AS-3D2U2-F MQS-54AS-3D2U2-PR MQS-54AS-3D2U2-PL 0.78N - - MQS-54AS-5D2U2 MQS-54AS-5D2U2-P MQS-54AS-5D2U2-F MQS-54AS-5D2U2-PR MQS-54AS-5D2U2-PL 1.18N - - MQS-54AS-7D2U2 MQS-54AS-7D2U2-P MQS-54AS-7D2U2-F MQS-54AS-7D2U2-PR MQS-54AS-7D2U2-PL *The number represents ratings. 1 : 3A 250V AC / 3A 30V DC 2 : 0.1A 125V AC / 0.1A 30V DC 3 : 0.1A 30V DC
6 MQS-54AS Series 6/10 [] Operating characteristic Actuator Operating Force code O.F. MAX. R.F. MIN N(50gf) 0.020N(2gf) Pin plunger type (Blank) N(100gf) 0.074N(7.5gf) N(200gf) 0.150N(15gf) 0.7mm 0.25mm 0.3mm 8.4 plus or minus 0.35mm N(300gf) 0.200N(20gf) N(20gf) 0.004N(0.4gf) short (L1) N(40gf) 0.017N(1.7gf) N(80gf) 0.034N(3.5gf) 3.0mm 1.25mm 0.6mm 8.8 plus or N(120gf) 0.039N(4gf) N(16gf) 0.003N(0.35gf) (L) N(32gf) 0.015N(1.5gf) N(70gf) 0.029N(3gf) 3.3mm 2.0mm 0.85mm 8.8 plus or N(110gf) 0.034N(3.5gf) long (L2) N(24gf) 0.012N(1.2gf) N(50gf) 0.025N(2.5gf) N(90gf) 0.029N(3gf) 4.0mm 2.5mm 1.2mm 8.8 plus or minus 1.4mm long (L3) N(20gf) 0.004N(0.4gf) N(40gf) 0.017N(1.7gf) N(70gf) 0.029N(3gf) 7.0mm 4.5mm 1.3mm 8.8 plus or minus 3.4mm N(16gf) 0.003N(0.35gf) R2.5 (D) N(32gf) 0.015N(1.5gf) N(70gf) 0.029N(3gf) 3.3mm 2.0mm 0.75mm plus or N(110gf) 0.034N(3.5gf) N(16gf) 0.003N(0.35gf) R1.3 (D3) N(32gf) 0.015N(1.5gf) N(70gf) 0.029N(3gf) 3.3mm 2.0mm 0.75mm 10.7 plus or N(110gf) 0.034N(3.5gf) N(20gf) 0.004N(0.4gf) roller (D2) N(40gf) 0.017N(1.7gf) N(80gf) 0.034N(3.5gf) 3.0mm 1.25mm 0.6mm 14.5 plus or N(120gf) 0.039N(4gf)
7 MQS-54AS Series 7/10 [] Terminal dimensions Unit : mm Lead wire PC board #110 Quick connect PC board Right angle PC board Left angle
8 MQS-54AS Series 8/10 [] Dimensions Unit : mm No Style Operating characteristic Pin plunger type 0.7mm 0.25mm 1 0.3mm 8.4 plus or minus 0.35mm 11.8 plus or minus 0.45mm short L=5mm 3.0mm 1.25mm 2 0.6mm 8.8 plus or minus 1.0mm 12.2 plus or minus 1.1mm short L=7.15mm 3.3mm 2.0mm mm 8.8 plus or minus 1.0mm 12.2 plus or minus 1.1mm
9 MQS-54AS Series 9/10 [] Dimensions Unit : mm No Style Operating characteristic long L=13.1mm 4.0mm 2.5mm 4 1.2mm 8.8 plus or minus 1.4mm 12.2 plus or minus 1.5mm long L=26.1mm 7.0mm 4.5mm 5 1.3mm 8.8 plus or minus 3.4mm 12.2 plus or minus 3.5mm R2.5 L=6.3mm 3.3mm 2.0mm mm plus or plus or minus 1.1mm
10 MQS-54AS Series 10/10 [] Dimensions Unit : mm No Style Operating characteristic R1.3 L=6.3mm 3.3mm 2.0mm mm 10.7 plus or minus 1.0mm 14.1 plus or minus 1.1mm roller L=5mm 3.0mm 1.25mm 8 0.6mm 14.5 plus or minus 1.0mm 17.9 plus or minus 1.1mm [] Notes 1. The appearance and specifications of the product may be modified without prior notice to improve its performance. 2. This catalog shows only outline specifications. When using the product, please obtain formal specifications. 3. Please see appendix [Cautions in Using Switches]. 4. Fix the switch by M2.3 screw with torque less than 29.4 N-cm(3 kg-cm) Fixing with spring washers and adhesive are recommended to avoid the loose of the screw. 5. Operating force applied to push button or actuator should be zero at free position and the force shall not be applied vertically to push button during the operation. 6. O.T. (Over travel) shall be set between 80% and 100% of O.T. specifications. 7. In connecting lead wires, care should be taken not to apply tension to. 8. In case of manual-soldering, soldering should be finished within 3 seconds by soldering iron of 30 W or with maximum tip temperature of 350 degree Celsius. Please do not apply pressure for 1 minute after soldering. 9. Please design usage of switch in proper operation even if any standard value of operational characteristics changes by plus or minus 20 %. 10. No dust, high humidity and organic gas should be found in the storage location. 11. Please confirm the performance on actual operation by simulation with actual environment environments for high reliability.
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
Snap Action Switch. General- Low force 25 g D2F-FL D2F-FL-T D2F-FL-D D2F-FL-A D2F-FL-A1
Snap Action Switch Subminiature Snap Action Switch Super compact, ideal for PCB mounting Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads (microvoltage/microcurrent)
D2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
D2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
Special-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
Contact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect
V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used
Switches Selector Chart
Seal Type Switches Switches Selector Chart Turquoise Stroke Mini Switches Turquoise Stroke Switches ABJ (BJ) Turquoise Switches ABS (BS) Turquoise Switches ASQM Miniaturization achieved with changing from
masterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
V-3000 Series Miniature Basic Switches
6 V-3000 Series Miniature Basic Switches Specifications FEATURES V-type Microswitches (JIS C 4505) That Feature Excellent Tracking and That Use Special Thermosetting Resin Used in Switch Cases and Covers.
Quick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
Actuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
Miniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
Z-15GW2277 Z-15GW2277-B
Basic Switch GENERAL PURPOSE General Purpose Basic Switch High precision basic switch in a variety of styles Wide margins of operating conditions increase the operating speed range Available in general
Solder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H
Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable
Add S to the end of the model number for the UL/CSA-approved version. Consult your OMRON sales representative for details.
Sealed Subminiature Snap ction Switch D2HW Smallest Sealed Snap-ction Switch in the Industry With a Long Stroke For Reliable ON/OFF ction Conforms to IP67 Case dimensions 22% smaller than conventional
14CESeries. Miniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CESeries Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
HIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH
HIGH APAITY, LONG LIFE SUBMINIATURE SWITH AVM3 P (PS) SWITHES FEATURES 10.1 Amp. high contact capacity is available Long life Precise operating (5: Pin plunger type) Flux-resistant construction with integrally
AM5 (QV) SWITCHES. Automation Controls Catalog
Automation ontrols atalog To Be Discontinued: Last time buy:march, 05 MINIATURE SWITHES WITH HIGH PREISION AM5 (QV) SWITHES 5.9 0. 7.8 FEATURES High precision as a result of designing ideal spring by using
General-purpose Limit Switch
General-purpose Limit Switch Compact, Economical, Plastic-body Limit Switch Featuring Direct Opening Action Contacts Employs direct opening action mechanism that forcibly opens contacts, and assures accurate
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Basic Switch SUBMINIATURE Subminiature Basic Switch Economical, subminiature
Ordering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
Transistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
Microswitches MS Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE
POWER ROCKER SWITCH J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE FEATURES 1. Power switches with an electromagnetic reset function which meet the need for energy savings in equipment and for safety. Applications
DPDT Basic Switch for Two Independent Circuit Control
Special-purpose Basic Switch DZ CSM_DZ_DS_E DPDT Basic Switch for Two Independent Circuit Control Ideal for switching the circuits operating on two different voltages, and for controlling two independent
series Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
SERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
PRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
Circuitry (IEC ) Form A (SPST-NO) 50 mω maximum initial (at 1 A 5 Vdc) MV7: Reinforced thermoplastic UL 94 V-0. Roller: Thermoplastic
Changeover circuit with rating up to 15A Long life snap action contacts mechanism Wiping and self-cleaning contact action Options of operating force Variety of actuators and contact arrangements Quick
Limit Switches E47 Precision Switches
June 09 E7 Precision Switches PG.0C.0.T.E 1 E7 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................
SUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.COUZET.COM MICOSWITCHES SUBMINIATUE MICOSWITCHES - SEALED VS - 88 Coil spring snap-action mechanism Wire lead or cable outputs, various terminal types with symmetric or asymmetric pinning Excellent
OsiSwitch Limit Switches Innovation through modularity
OsiSwitch Limit Switches Innovation through modularity Osiswitch limit switches Simply Smart: Variable composition Note: All outline dimensions are in mm/inches Positive openings with rigid operators and
Model Number Structure
Thumbwheel Switch Refer to Warranty and Application Considerations (page 1) and Safety Precautions (page 3). General-purpose Thumbwheel Switches A wide range of output codes are available. Use the back-mounting
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
Ultra Slim Relays 24
Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest
Distinctive Characteristics
Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents
Leading the market, our 5 mm 2-pole surface mount relays comply with JIS C0806
Leading the market, our 5 mm -pole surface mount relays comply with JIS C86 TQ TQ RELAYS Compliance with RoHS Directive FEATURES 1. Flat compact size 14.(L) 9.(W) 5.(H).551(L).354(W).197(H). : High sensitivity
Distinctive Characteristics
Distinctive Characteristics Top or side actuation permits flexible board design. Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Crisp actuation positively
Bulletin 700-HL 2-Pole Terminal Block Relay
Bulletin 700-HL 2-Pole Terminal Block Relay Bulletin 700-HL 2-Pole "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications Screw terminal
GX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of
Top-actuated (B3U-1000 Series)
Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.
Atom FBM GENERAL S SERIES. Specification CHIP FERRITE BEAD MULTILAYER TYPE. Part No. InduSTance 1. Percent RDC 2 IDC Tolerance Max Max
CHIP FERRITE BEAD MULTILAYER TYPE FBM GENERAL S SERIES Specification Part No. InduSTance 1 Percent RDC 2 IDC Tolerance Max Max (MA) FBM 0402 ST 060 S 6 @ 100 MHZ S 0.05 500 FBM 0402 ST 100 S 10 @ 100 MHZ
SIGUARD Safety Systems Safety Integrated
SE 10 / SE. 00 / SE. 4 / SE. 5 Molded plastic / metal enclosure with separate actuator Application Safety interlock switches (limit switches) with separate actuator are used where the position of doors,
Standard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
POWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE
POWER ROCKER SWITCH SWITCHES AJ8 switch Standard actuator AJ8 switch Wide actuator FEATURES 1. Power rocker switches for safety requirements. All versions comply with ClassII EN61058-1 insulation grade.
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
52 x 72 x 30 (2.05 x 2.83 x 1.18) N/C + N/O; N/C + N/C N/C + N/O N/C + N/O; N/C + N/C
Selection Guide Osiswitch Classic Design Classic Catalog number XCKM XCKL XCKJ Enclosure Metal Fixed or plug-in body, -4 C (-4 F) Features 3 conduit entries or +2 C (+248 F) versions Modularity Head +
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
Datasheet - ZR Z
12.02.2016-22:08:18h Datasheet - ZR 235-11Z Position switch / 235 Metal enclosure - DIN EN 50047 with Actuator / 235 Roller plunger r Preferred typ Metal enclosure Wide range of alternative actuators Good
DC 2-wire Cylindrical Inductive Proximity Sensor
SERIES DC -wire Cylindrical Inductive Proximity -wire type available Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance & ease of use G-8/8U GA-/GH GX GX-N G-8H/8H G-N Robust
Product Discontinuation Notices. Discontinuation Notice of Compact proximity sensor TL-M series (for china area only)
PRODUCT NEWS Product Discontinuation Notices August 1, 2011 Proximity Sensors No. 2011248E-2 Discontinuation Notice of Compact proximity sensor (for china area only) Product Discontinuation Recommended
2. Actuator B: Ball type P: Pin type F: Flat type
Contact Displacement Sensor Built-in Amplifier Ensures Ease of Use and Saves Wiring Effort. Sensor Operates with a Low Force in a Wide Range of Applications. H Works with a low operating force (30 gf)
XCKD2145N12 limit switch XCKD - th.plastic roller lever var.length - 1NC+1NO - snap - 1/2NPT
Characteristics limit switch XCKD - th.plastic roller lever var.length - 1NC+1NO - snap - 1/2NPT Complementary Switch actuation Electrical connection Cable entry Contacts insulation form Positive opening
DC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range
INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price G-8/8U GA-/GH GX GX-U/FU
JJ Series Detector Switches
Applications JJ Series Detector Switches Automotive Instrumentation White goods Telecommunications Benefits RoHS Compliant Halogen and Lead Free Sharp detection feeling Compact Size TE Connectivity is
Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where
XCKP2110N12 limit switch XCKP - metal end plunger - 1NC +1NO - snap - 1/2NPT
Characteristics limit switch XCKP - metal end plunger - 1NC +1NO - snap - 1/2NPT Complementary Switch actuation Electrical connection Cable entry Contacts insulation form Positive opening Positive opening
Micro Limit Switch Series 8064
> For universal application > Versions with snap-action contact positive opening contact > With connecting cable or with single cores when it is used as a built-in device > Width Single limit switch 11
3 Series Thumbwheel Switches
Features/Benefits Most complete product offering in the industry Spacers available to fit most panel cutouts Front or rear mounting options Illuminated models available Typical Applications Test & measurement
(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
Mini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
XCKN2118G11 limit switch XCKN - thermoplastic roller lever - 1NC+1NO - snap - Pg11
Characteristics limit switch XCKN - thermoplastic roller lever - 1NC+1NO - snap - Pg11 Complementary Tracks Switch actuation Electrical connection Contacts insulation form Positive opening Positive opening
Distinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
XCKM102 limit switch XCKM - steel roller plunger - 1NC +1NO - snap action - Pg11
Characteristics limit switch XCKM - steel roller plunger - 1NC +1NO - snap action - Pg11 Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device short
100A inrush current compatible, compact and large capacity snap-in type with easy mounting. Ratings and Safety Standards C-UL-US
SDDJE 0A 0V AC Qualified Detector Power Dual-in-line Package Product Line Circuit arrangement SPST (mm) 00A inrush current compatible, compact and large capacity snap-in type with easy mounting Operating
XCKP2145G11 limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - Pg11
Characteristics limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - Pg11 Complementary Switch actuation Electrical connection Cable entry Contacts insulation form Positive opening
DC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range
INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price GA-/GH GX GX-U/FU
Position Switches Series 8070
www.stahl.de > Enclosures of type of protection "Increased safety > Dimensions and characteristic values according to EN 50041 > Replaceable contact in flameproof enclosure > Positive opening contacts
XCKD3918P16EX limit switch XCKD - roller lever - 2NC + NO - ATEX/IECEx
Characteristics limit switch XCKD - roller lever - 2NC + NO - ATEX/IECEx Main Range of product Series name Product or component type Device short name Sensor design Body type Head type Material Fixing
XCKJ10541H29 limit switch XCKJ - th.plastic roller lever var. length - 1NC+1NO - snap - M20
Characteristics limit switch XCKJ - th.plastic roller lever var. length - 1NC+1NO - snap - M20 Complementary Switch actuation Electrical connection Contacts insulation form Number of steps 1 Positive opening
XB4BS542 red Ø40 Emergency switching off pushbutton Ø22 latching turn release 1NC
Characteristics red Ø40 Emergency switching off pushbutton Ø22 latching turn release 1NC Complementary CAD overall width CAD overall height CAD overall depth Terminals description ISO n 1 Product weight
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers
General Specifications
Ultra-Miniature Slides General Specifications Electrical Capacity (Resistive Load) ower Level (silver): 0.A @ 0V DC Logic Level (gold): 0.VA maximum @ 8V AC/DC maximum (Applicable Range 0.mA ~ 0.A @ 0mV
XCKJ10541H29 limit switch XCKJ - th.plastic roller lever var. length - 1NC+1NO - snap - M20
Characteristics limit switch XCKJ - th.plastic roller lever var. length - 1NC+1NO - snap - M20 Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device
XCKJ10511 limit switch XCKJ - thermoplastic roller lever - 1NC+1NO - snap action - Pg13
Characteristics limit switch XCKJ - thermoplastic roller lever - 1NC+1NO - snap action - Pg13 Complementary Switch actuation Electrical connection Contacts insulation form Number of steps 1 Positive opening
Miniature Basic Switch
Miniature Basic Switch Reliable Basic Switches in a Wide ariation Wide variation of best-selling microswitches with switching currents of 10 to 21 A. Can be used for interrupting current when doors are
RPM42P7 power plug-in relay - Zelio RPM - 4 C/O V AC - 15 A - with LED
Characteristics power plug-in relay - Zelio RPM - 4 C/O - 230 V AC - 15 A - with LED Complementary Shape of pin [Ui] rated insulation voltage Main Range of product Series name Product or component type
PRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
C&K S2 Series Subminiature Thumbwheel Switches
Features/Benefits Front & rear mounting options available Variety of function codes Spacers available to fit most panel cutouts Typical Applications Test & measurement equipment Instrumentation Computer
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. TESTING LOW PROFILE 2 FORM C RELAY TQ RELAYS 9.354 26.7 +.4 1.51 5.2 +.16.8
XCKL115 limit switch XCKL - thermoplastic roller lever - 1NC+1NO - snap - Cable gland
Characteristics limit switch XCKL - thermoplastic roller lever - 1NC+1NO - snap - Cable gland Complementary Switch actuation Electrical connection Contacts insulation form Number of steps 1 Positive opening
Suitable for detecting transparent films or transparent bottles
Ultrasonic Sensor Suitable for detecting transparent films or transparent bottles Reliable detection of transparent objects The sensor reliably detects transparent films or transparent objects. Only 16
1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
XCMN2102L2 limit switch XCMN - steel roller plunger - 1NC +1NO - snap - 2 m
Characteristics limit switch XCMN - steel roller plunger - 1NC +1NO - snap - 2 m Complementary Switch actuation Electrical connection Cable length Cable composition Wire insulation material Contacts insulation
Safety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS FR FX FK FW 5 6 7 11 1 14 NC NC snap action snap
Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths
DATASHEET - ESR5-NO-41-24VAC-DC Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths Part no. ESR5-NO-41-24VAC-DC Catalog No. 118701 EL-Nummer (Norway) 0004133317 Delivery program Product
D5B. Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics. Mechanical Touch Switch. Model Number Structure
Mechanical Touch Switch D5B CSM_D5B_DS_E_3_2 Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics Slow-action switching mechanism used. Gold-plated contact with coil spring