Switches Selector Chart
|
|
- Mae Ross
- 5 years ago
- Views:
Transcription
1 Seal Type Switches Switches Selector Chart Turquoise Stroke Mini Switches Turquoise Stroke Switches ABJ (BJ) Turquoise Switches ABS (BS) Turquoise Switches ASQM Miniaturization achieved with changing from 1 Form C to 1 Form A or 1 Form B contacts. Handles low-level switching loads Silent operation construction with sliding contact Compact size and long stroke Silent operation construction with sliding contact (bottom ) J, High sealing performance sealed switches Elastomer double molding technology contribute to steady sealing quality O.F. 1.96N (bottom ) S, High sealing performance sealed switches Elastomer double molding technology contribute to steady sealing quality Expansion of low-level circuit <Ag plating on both sides of sliding contact> 1mA 5V DC to 50mA 16V DC <Au plating on both sides of sliding contact> 1mA 5V DC to 100mA 30V DC O.F. 2.45N (Long stroke ) <Au-clad contact> <Double layer contact: CuNi alloy + Au-clad contact> <Triple layer contact: CuNi alloy + AgNi alloy + Au-clad contact> 1.2N (Pin plunger) 1.5N (Simulated leaf lever) 1.5N (Pin plunger and simulated leaf lever) 1.7N (Leaf lever) (Long stroke ) Min Nominal rating load: Min Nominal rating load: Min AgNi alloy: Min Low-level rating load: Min Low-level rating load: Min Au-clad: Min mm, 8.3mm 8.3mm (M3) 6.5mm (M1.2), 4.8mm (M2.3), 13mm (M3) Min AgNi alloy: Min Au-clad: Min All S products: 9.5mm (M2.3) Approx. 0.5 g (terminal ) (Simulated leaf lever) ( ) Leaf lever Simulated leaf lever or PC angle terminal and left side s) Approx. 0.8 g (terminal ) and left side s) Approx. 0.5 g (terminal ) or PC angle terminal and left side s) Approx. 2 g (terminal ) 1 AECTB34E T
2 Seal Type Switches ABV (BV) Turquoise Switches ABV Integral construction of body and cover, sealed switches Plunger section adopts ultrasonic swaging process Min Nominal rating load: Min Low-level rating load: Min mm (M3) (Short roller lever, Roller lever).187 quick-connect terminal Approx. 7 g (terminal ) 2 AECTB34E T
3 Non Seal Type Switches AM1 (NZ) Switches AV3/AVM3/AVT3/AVL3 (FS/FS-T) Switches AV3 (FS) Switches Contact gap 1 mm Type AV6 (CS) Switches FS FS-T High precise operation Product s abundant at an oil tight, various actuators, etc. Standard Long version available Au-clad double layer contacts for low-level circuit available There is the direction of terminal of two s. <Standard version> <Long version> S and door inter-lock switches for secondary circuit of OA equipment Contact gap of greater than 1mm Superior operating position precision Using a connector for connections significantly improves operation effectiveness High contact reliability is achieved by simple dust prevention guard The contact form is available in two s, the SPST-NC and the SPST-NO. Adoption of Au-clad double layer contacts of high reliability for low-level circuit <Double layer contact: CuNi alloy + Au-clad contact> <Triple layer contact: CuNi alloy + AgNi alloy + Au-clad contact> (Triple layer contact) <CuNi alloy + Au-clad contact> to 1 to 100mA, 5 to 30V DC (Double layer contact) 1 to 100mA, 5 to 250V AC (Triple layer contact) <Standard version> (Au-clad contact only) <Long version> Min Min Long version: Min Min Min Min AgNi alloy contact: Min Min Min Au-clad contact: Min mm (M4) 9.5mm (M2.3) 9.5mm (M2.3) (Panel mount, Panel mount roller, Panel mount cross roller) (Hinge lever, Flexble leaf lever) (Hinge short roller lever, Hinge roller lever, Flexble roller leaf lever) Self-standing PC board terminal Connector connection (XA connector produced by JST Mfg. Co., Ltd.) Direction of terminal FS FS-T Direction of terminal FS,, Approx. 45 g Approx. 2 g Approx. 2 g Approx. 2.5 g (Plunger ) 3 AECTB34E T
4 Non Seal Type Switches Fall Detection Switch AEQ (EQ) Switches AH1 (FJ) Switches AV4 (FU) Switches AHF2 (TiP) Switches AEQ1 Handles low level load 100 μa at 3 V DC to 100 ma 30 V DC Same size as J and long stroke. For pin plunger, it maintains an O.T. (Over Travel) with over 2.2 mm on the NO side and over 2.5 mm on the NC side. Contact force does not depend on the operation stroke. Silent operation construction with sliding contact 2.0 mm mounting hole (with stand off) available General-purpose small screws can be used. Soldering and flux-resistant construction Flat terminal shape Lineup includes 1 Form A and 1 Form B s O.F. 1.47N long of 300,000 operations minimum Lineup includes a with mounting holes AHF2 Small, highly reliable TiP detection switches containing a photo sensor The contact form is equivalent to normally closed contacts, which satisfies the PL Act. 100μA 3V DC to 100mA 30V DC O.F. 0.74N <Ag plated contact> <Au plated contact> Photo transistor (Please refer to the catalog.) 1.2N 1.5N 1.7N O.F. 0.74N: Min O.F. 1.47N: Min V DC 0.1mA: Min AgNi alloy contact: Min V DC 100mA: Min Au-clad contact: Min Min mm (M2) Operation angle: 25 to 60 degrees Min Min Ag plated contact: Min Au plated contact: Min mm (M1.4) Min (Leaf lever, Simulated leaf lever) Self-standing PC board terminal PC board angle terminal Straight PC board terminal Approx. 0.8 g Approx. 0.5 g Approx. 0.2 g (PC board terminal) Approx. 1 g 4 AECTB34E T
5 Interlock Switches AGX (GX) Interlock Switches AV1 (GW) Interlock Switches 14 mm in depth and compact Contact gap of greater than 4 mm (Conforming to IEC ) Insulation distance between contacts: 8mm or more (Snap-in mounting 2 Form A and 3 Form A s) Safety power switches constructed with dual restoration spring mechanism <AgCuO alloy contact> <AgCuO alloy contact> 1 Form A: 3.92N 2 Form A: 3.92N 3 Form A: 5.88N 1 Form A: 4.90N 1 Form B: 2.94N 1 Form A 1 Form B: 5.88N 2 Form A: 7.85N 3 Form A: 9.81N Min Min. 106 Min Min Snap-in mounting Screw mounting (M4) Snap-in mounting.250 Quick-connect terminal.250 Quick-connect terminal, Approx. 15 g Approx. 14 g 5 AECTB34E T
Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10
http://www.shinmei-e.co.jp Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10 [] Features Flux-resistant construction with integrally molded s. 4 variations with
More informationHIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
More informationContact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect
V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
More informationTerminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
More informationMiniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
More informationHIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH
HIGH APAITY, LONG LIFE SUBMINIATURE SWITH AVM3 P (PS) SWITHES FEATURES 10.1 Amp. high contact capacity is available Long life Precise operating (5: Pin plunger type) Flux-resistant construction with integrally
More informationContact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
More informationActuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
More informationD2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
More informationmasterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
More informationAdd S to the end of the model number for the UL/CSA-approved version. Consult your OMRON sales representative for details.
Sealed Subminiature Snap ction Switch D2HW Smallest Sealed Snap-ction Switch in the Industry With a Long Stroke For Reliable ON/OFF ction Conforms to IP67 Case dimensions 22% smaller than conventional
More informationSnap Action Switch. General- Low force 25 g D2F-FL D2F-FL-T D2F-FL-D D2F-FL-A D2F-FL-A1
Snap Action Switch Subminiature Snap Action Switch Super compact, ideal for PCB mounting Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads (microvoltage/microcurrent)
More informationPin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
More informationBasic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
More informationQuick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
More informationOrdering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
More informationAM5 (QV) SWITCHES. Automation Controls Catalog
Automation ontrols atalog To Be Discontinued: Last time buy:march, 05 MINIATURE SWITHES WITH HIGH PREISION AM5 (QV) SWITHES 5.9 0. 7.8 FEATURES High precision as a result of designing ideal spring by using
More informationD2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
More informationSafety Systems Safety Integrated
3SF3 Limit, interlock and cable-operated Overview It is possible to directly connect selected limited, interlock and cable-operated switches via AS-Interface with safety-oriented communication. In these
More informationseries Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Basic Switch SUBMINIATURE Subminiature Basic Switch Economical, subminiature
More informationZ-15GW2277 Z-15GW2277-B
Basic Switch GENERAL PURPOSE General Purpose Basic Switch High precision basic switch in a variety of styles Wide margins of operating conditions increase the operating speed range Available in general
More informationSS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
More informationSpecial-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
More informationSolder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H
Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable
More information18/06/2013
V4 8318 Sealed High-current 83180 Part number made to order IP 67 protection Nominal ratings 0.1 A to 10 A / 250 VAC Minimum rating 1 ma / 4 VDC Operating temperature -40 C to +125 C Choice of actuators
More information14CESeries. Miniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CESeries Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
More informationGeneral-purpose Limit Switch
General-purpose Limit Switch Compact, Economical, Plastic-body Limit Switch Featuring Direct Opening Action Contacts Employs direct opening action mechanism that forcibly opens contacts, and assures accurate
More informationSUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.COUZET.COM MICOSWITCHES SUBMINIATUE MICOSWITCHES - SEALED VS - 88 Coil spring snap-action mechanism Wire lead or cable outputs, various terminal types with symmetric or asymmetric pinning Excellent
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationLimit Switches and Safety
Industrial Controls Product Catalog 217 Section contents 3SE International (IEC) 3SE5 General data Overview /4 - /9 3SE5 plastic enclosures Plastic, 31 mm Plastic, 5 mm 3SE5, selection and ordering data,
More informationContact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
More informationMechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where
More informationTongue Switches Trojan 5 & 6
Interlock Switches Description The Trojan family is a universal tongue (or key) actuated safety interlock switch designed to fit at the leading edge of sliding, hinged or lift-off guards. The dual key
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationMiniature Basic Switch
Miniature Basic Switch Reliable Basic Switches in a Wide ariation Wide variation of best-selling microswitches with switching currents of 10 to 21 A. Can be used for interrupting current when doors are
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More information4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
More informationAS-Interface Slaves. I/O Modules for Operation in the Field. Digital I/O modules IP67 - K45
Overview The large industry-proven K60 compact modules are complemented perfectly by the K45 compact module series. They round off the existing product range of smaller modules. The acknowledged advantages
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
More informationLimit Switches and Safety
Limit Switches and Safety Introduction Contents Pages 3SE International (IEC) Limit Switches 3SE5 General data Overview......................................... 13/4-13/9 3SE5 plastic enclosures 3SE5,
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationGeneral Purpose Phenolic
Switch Features 8 Contact Ratings DC ratings optional Standard or light force versions available High temperature versions optional Agency approved long life versions optional Electrical Ratings and Operating
More informationDatasheet - ZR Z
12.02.2016-22:08:18h Datasheet - ZR 235-11Z Position switch / 235 Metal enclosure - DIN EN 50047 with Actuator / 235 Roller plunger r Preferred typ Metal enclosure Wide range of alternative actuators Good
More informationSAFETY SWITCHES. Phone: Fax: Web: S20 Safety Switch
SAFETY SWITCHES S0 Safety Switch S0 Safety Switch for guarding the sliding door on a pick-and-place machine The S0 is a Safety Switch without guard interlocking, which can always be used when the dangerous
More informationMICRO SWITCH Sealed Subminiature Basic Switches. ZW Series. Datasheet
MICRO SWITCH Sealed Subminiature Basic Switches ZW Series Elblinger Elektronik GmbH Lange Wanne 25 38259 Salzgitter Datasheet Telefon 05341/8212-1 Fax 05341/821299 e-mail mail@elblinger-elektronik.de Internet
More informationV-3000 Series Miniature Basic Switches
6 V-3000 Series Miniature Basic Switches Specifications FEATURES V-type Microswitches (JIS C 4505) That Feature Excellent Tracking and That Use Special Thermosetting Resin Used in Switch Cases and Covers.
More informationSERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
More informationDatasheet - ZR Z
Print - Create PDF - Create EXCEL file 21.04.2011-16:57:42h Datasheet - ZR 236-11Z Position switch / 236 thermoplastic enclosure - DIN EN 50047 with Actuator / 236 Roller plunger R thermoplastic enclosure
More information2. Actuator B: Ball type P: Pin type F: Flat type
Contact Displacement Sensor Built-in Amplifier Ensures Ease of Use and Saves Wiring Effort. Sensor Operates with a Low Force in a Wide Range of Applications. H Works with a low operating force (30 gf)
More informationseries Miniature snap-action switches
Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Friction contact
More informationHigh-current Dual-current
Sealed V Sealed IP 67 protection Nominal ratings. A to A/5 VAC Minimum rating ma/ VDC Operating temperature - C to +5 C Choice of actuators with possible fixing positions Main specifications High-current
More informationConstruction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
More informationOrdering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
More informationMiniature Relays Series M25 Type M25-1 pole 16 A Monostable
Miniature Relays Series M25 Type M25-1 pole 16 A Miniature size mm PCB mounting 5 kv / 10 mm insulation Switching capacity 16 A / 250 General purpose, industrial electronics Sealed according IP 67 Low
More informationToneluck Switches PBN MPN MPV LTV. PWL MQS-1 MQS-1s MQS-2 THK-1 KEY SP DS
Toneluck Switches PBN MPN MPV LTV PWL MQS-1 MQS-1s MQS-2 THK-1 KEY SP DS PB Push button switch Characteristics Exclusive spring loaded contacts with audio bridge point make the perfect mechanism for long
More informationActuator Series Common to Miniature, V-Size models
V/VX/D3V Common Accessories Ordering Information Actuators (Sold Separately) Actuators are supplementary components used when operating pin plunger switches using cams or dogs or when transmitting mechanical
More informationSafety Systems Safety Integrated
3SE2 / SE3 Molded plastic /metal enclosure with separate actuator Application Safety interlock switches with separate actuator are used where the position of doors, covers or safety screens must be monitored
More informationDatasheet - ZS Z
Datasheet - ZS 236-11Z Position switch / 236 thermoplastic enclosure - DIN EN 50047 with Actuator / 236 Plunger S thermoplastic enclosure Good resistance to oil and petroleum spirit Wide range of alternative
More informationSIGUARD Safety Systems Safety Integrated
SE 10 / SE. 00 / SE. 4 / SE. 5 Molded plastic / metal enclosure with separate actuator Application Safety interlock switches (limit switches) with separate actuator are used where the position of doors,
More informationSafety Products Introduction LS-Titan Safety Interlock Switches. Technical Reference... 2
Key Interlock Switch Door-Flap Switch Door-Hinge Switch.0 Introduction Technical Reference............................................ 2.1 Learn Online Product Description.............................................
More informationSpecial-Purpose Proximity Sensor E2C
Special-Purpose Proximity Sensor E2C Cylindrical Inductive Sensors with Separate Amplifiers Provide Variable Detecting Capabilities Separate amplifier allows sensor to fit in space-confined sites, providing
More informationSAFETY LOCKING DEVICES
L200 Heavy-Duty L200 Safety Locking Device on a very large gate in a logistics operation with forklift traffic The L200 Safety Locking Device designed for highly demanding applications is predestined for
More informationSUNCLIX Connection technology for photovoltaics
SUNCLIX Connection technology for photovoltaics Connection technology for photovoltaics Are you looking for innovative and reliable connection technology for your PV modules, inverters or the complete
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More informationOrdering details. Approval. Classification. Global Properties :27:33h. Solenoid interlock / AZM 161I / AZM 161I B6R
13.06.2016 05:27:33h Datasheet AZM 161SK 12/12RI 024 B6R Solenoid interlock / AZM 161I / AZM 161I B6R right hand model Compact design Interlock with protection against incorrect locking. For very smal
More information1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More informationPOWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE
POWER ROCKER SWITCH SWITCHES AJ8 switch Standard actuator AJ8 switch Wide actuator FEATURES 1. Power rocker switches for safety requirements. All versions comply with ClassII EN61058-1 insulation grade.
More information100A inrush current compatible, compact and large capacity snap-in type with easy mounting. Ratings and Safety Standards C-UL-US
SDDJE 0A 0V AC Qualified Detector Power Dual-in-line Package Product Line Circuit arrangement SPST (mm) 00A inrush current compatible, compact and large capacity snap-in type with easy mounting Operating
More informationProduct and Applications Description. Application Programs. Note. instabus EIB Technical Product Information. June 2005
Product and Applications Description Application Programs The application programs of the dimmer UP 525/01 consist of two elements: the actuating and the sensor program element. The tasks actuating program
More informationFOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
More informationthe Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
More informationNon-Contact Safety System CES-AZ
Read head CET-AX-... Read head with guard locking and guard lock monitoring Up to category High locking forces up to 00 N Integrated transponder coding Metal housing Design and functionality With the read
More informationDC 2-wire Cylindrical Inductive Proximity Sensor
SERIES DC -wire Cylindrical Inductive Proximity -wire type available Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance & ease of use G-8/8U GA-/GH GX GX-N G-8H/8H G-N Robust
More informationZLS Series Global Limit Switches
GENERAL INFORMATION ZLS series limit switches are specifically designed for worldwide applications and is supported by Honeywell global resources for sales and after sales service. ZLS series limit switches
More informationJ8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE
POWER ROCKER SWITCH J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE FEATURES 1. Power switches with an electromagnetic reset function which meet the need for energy savings in equipment and for safety. Applications
More informationMore than safety. Product Overview. Safety Engineering
More than safety. Product Overview Safety Engineering Safety Engineering at a Glance Non-Contact Safety Systems Transponder Coding CES-A-C5 Safety system CES-A-A Safety system CES-AZ-A Approvals Safety
More informationORDER GUIDES WITH STEEL ROD ACTUATORS WITH HIGH STRENGTH THERMOPLASTIC ROD ACTUATORS*
For application help: call 1-800-537-6945. Honeywell MICRO SWITCH Sensing and Control 89 Style 1 Style 2 Style 3 Style 4 Style 5 Style 6 Style 7 Style 8 Automatically cut power when service door or drawer
More informationCF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
More informationSafety switches with separate actuator
A Safety switches with separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF2 VF KEYF3 VF KEYF VF KEYF ACTUATORS CONTACT BLOCKS 9 snap action overlapped FD FP FL FC 21 22 33 3 3NC 2NO+1NC 1NO+ CONDUIT
More informationDistinctive Characteristics
Distinctive Characteristics Low Profile Pushbuttons Series UB Bright, full face, or spot illumination with red, amber, or green single-element LEDs (an integral part of the switch), plus square or rectangular
More informationV REG.-Nr. 3919, Z E214024
General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection
More informationSurface-Mounting Product Ranges
Introduction Overview Light signals SCHUKO socket outlets Two-circuit switches Garages, laundry rooms, laboratories and workshops are often exposed to a lot of heavy-duty activity, which includes the odd
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More information63 to 125 A. Functions. Conformity standards. General characteristics. Changeover switches SIRCO VM1 changeover switches.
comut_004_a_1_cat Changeover switches switches 63 to 125 A switches are manually operated three or four pole switches. They provide, source inversion or switching under load between two low voltage power
More informationSafety switches with separate actuator
Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD5 VF KEYD6 VF KEYD7 VF KEYD8 VF KEYD10 VF KEYD11 ACTUATORS FR FX FK FW 5 6 7 11 1 14 NC NC snap action snap
More informationXB4BK123B5. Product data sheet Characteristics. Complete illuminated selector switch. position stay put 1NO+1NC 24V. Main.
Characteristics green complete illuminated selector switch Ø22 2- position stay put 1NO+1NC 24V Main Range of product Product or component type Device short name Bezel material Fixing collar material Mounting
More informationDPDT Basic Switch for Two Independent Circuit Control
Special-purpose Basic Switch DZ CSM_DZ_DS_E DPDT Basic Switch for Two Independent Circuit Control Ideal for switching the circuits operating on two different voltages, and for controlling two independent
More informationPC RELAY TERMINAL/ PC TERMINAL
Input points Output points PC Relay (PC relays mounted) PC Input points Output points Input points Output points Input points Output points Input points Output points Output points ORDERING INFORMATION
More informationOne step ahead in performance and mounting ease
95 Micro Photoelectric Amplifier Built-in PM-5 SERIES PM-45 SERIES PM-5 SERIES General terms and conditions... F- guide... P.9~ Related Information Glossary of terms / General precautions...p.1549~ / P.155~
More informationMiniature Enclosed Limit Switch
Miniature Enclosed Limit Switch Economical, General-Purpose, Enclosed Switch High precision and long life (,000,000 mechanical operations) Gasket diaphragm seal provides high environmental resistance Suitable
More informationEE-SPX74/84. Ordering Information. Compact Sensor for High-Density Mounting with Easy Snap-In Connector. H Connector features a built-in safety
Compact for High-Density Mounting with Easy Snap-In Connector H Connector features a built-in safety lock for shock and vibration resistance H replacement made simple without rewiring H Cables can be bent
More informationXB4BW33B5 green flush complete illum pushbutton Ø22 spring return 1NO+1NC 24V
Characteristics green flush complete illum pushbutton Ø22 spring return 1NO+1NC 24V Product availability : Stock - Normally stocked in distribution facility Price* : 119.00 USD Main Range of product Product
More informationCircuitry (IEC ) Form A (SPST-NO) 50 mω maximum initial (at 1 A 5 Vdc) MV7: Reinforced thermoplastic UL 94 V-0. Roller: Thermoplastic
Changeover circuit with rating up to 15A Long life snap action contacts mechanism Wiping and self-cleaning contact action Options of operating force Variety of actuators and contact arrangements Quick
More informationM8 & M12 Connector Cables
Page Number egend M8 & M Connector Cables Cordset Initiative Data Sheet XSF-M8 / XSW-M8 / XSF-M / XSW-M XSF M8 Single-Ended XSW M8 Double-Ended 7 XSF M Single Ended 9 XSW M Double-Ended Cordset Number
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More information1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationMagnetically Actuated Safety Interlock Switches
Conforms to EN10, EN292, EN020-1 CSA and BG approved Actual Size Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic,
More information