FUJI UG SERIES PROGRAMMABLE OPERATION DISPLAY USER S MANUAL. <Notes on Using UG221H- LE4, LR4> TYPE: UG221H-LE4 UG221H-LR4 FEH374

Transcription

1 FUJI UG SERIES PROGRAMMABLE OPERATION DISPLAY USER S MANUAL <Notes on Using UG221H- LE4, LR4> TYPE: UG221H-LE4 UG221H-LR4 FEH374

2 Preface This manual explains the notes and the limits for using UG221H-LE(R)4. About other specifications and functions, refer to < UG221H-LE(R)4 OPERATING INSTRUCTIONS > (INA-F6969), User s Manual < Hardware > (), User s Manual < Operation > (FEH375), and User s Manual < Function > (FEH376) etc. Contents 1. Outline Models Differences between UG221H-LE(R)4 and UG221H-xC Specifications System Program File Compatible Version of Editing Software (UG00S-CW) Procedures on Editing Memory Capacity of UG221H-LE(R) SRAM/Clock Function List of Accessories

3 Record of Revisions The manual number is shown at the bottom right of the front cover. Printing Date Reference No. Revised Contents December, 2002 FEH374 1 st Edition printed 2

4 1. Outline UG221H-LE(R)4 is a new model of POD UG221 series at low cost version. It has an excellent cost/performance and almost same functionality as UG221 series. Monochrome 8-gradation display is supported. It has only analog touch switch. UG221H-LR4 has built-in SRAM area of 32k bytes, which supports backup functions (data logging, recipe data, etc.) that cannot be supported in the standard models of UG221 series. There are some limits in other functions. For more information about the limitations, refer to 3. Differences between UG221H-LE(R)4 and UG221H-xC4. 2. Model The model name of UG221H-LE(R)4 series is as follows: UG221H LE4 Power supply 4: 24V DC Function specification E: Standard model R: SRAM/Built-in clock function Display element L: STN monochrome LCD 3. Differences between UG221H-L(E)R4 and UG221H-xC4 UG221H-LE(R)4 has the following features that are different from UG221 series. 1) Display color: monochrome 8-gradation only 2) Touch switch: analog switch type only 3) Modular jack: one port only The functions which use modular jack port are as follows: UG00P-MR, bar code reader, UG00P-U2, multi-link 2, temperature control/plc 2Way, UG-Link, ladder communication function, Modbus slave communication, serial printer * When using Simulator, the above functions cannot be used because [Editor port] must be selected in [Modular Port] setting for Simulator. 4) Printer port (parallel) not supported 5) Communication interface unit (UG03I-x) cannot be used for UG221H-LE(R)4. 6) Built-in SRAM area 32k bytes supported (only in UG221H-LR4) UG221H-LR4 has built-in lithium secondary battery which enables SRAM and clock functions. For more information, refer to 9. SRAM/Clock Function. 3

5 4. Specifications For each specifications and function, etc., refer to the following manuals. Specifications/Functions Manuals Manual No. Specifications, dimensions, etc. OPERATING INSTRUCTIONS INA-F6969 Available PLC and wiring diagram ( in 1:1 connection ) UG30 Series Manual < Hardware > (5 Connection to PLC) Multi-link and multi-link 2 UG30 Series Manual < Hardware > Temperature control network ( 3 Serial Communications ) * UG Series Manual < Temperature Control Network > PLC2Way UG30 Series Manual < Hardware > FEH365 ( 3 Serial Communications ) UG-Link UG30 Series Manual < Hardware > ( 3 Serial Communications ) Ladder communication function UG30 Series Manual < Hardware > Universal serial communication ( 5 Connection to PLC ) UG Series Manual < General-purpose serial communications > FEH353 Way to edit each function, etc. UG Series Manual < Operation > FEH375 Setting items of each function, etc. UG Series Manual < Function > FEH376 * UG00P-TC (terminal converter) cannot be used for UG221H-LE(R)4. In UG30 Series Manual < Hardware > using UG00P-TC is recommended in Multi-Link 2 connection or Multi-Link connection, however, refer to the wiring diagram which does not use UG00P-TC when UG221H-LE(R)4 is used. 5. System Program File File name: UG221L.prg 6. Compatible Version of Editing Software (UG00S-CW) UG00S-CW Ver

6 7. Procedures on Editing 1) Start UG00S-CW. 2) Click the [New] icon or [New] in the [File] menu. 3) The [Edit Model] dialog is displayed. Select [ UG221L ], and click [OK]. 4) The [Select PLC Type] dialog is displayed. Select the PLC connected to UG221H-LE(R)4, and click [OK]. 5) The [Screen [0] Edit] window is displayed. Start editing UG221H-LE(R)4. 8. Memory Capacity of UG221H-LE(R)4 UG221H-LE(R)4 has the memory capacity of about 1M bytes. (This size differs according to font type.) Memory extension by using memory cassette is not available. For restriction on setting each function, refer to [Parts Types and Placement] of Chapter 2 Screens in UG Series Manual < Operation > (FEH375), especially to UG221 series. 5

7 9. SRAM/Clock Function This function is available only in UG221H-LR4. It has built-in SRAM area, 32k bytes. It is in no need of battery replacement because it has rechargeable battery. However, if left standing for hours without power supply, the data may be deleted because the backup time period exceeds. Be sure to save the data for backup before the power is turned OFF. For more information about backup memory specifications of SRAM/clock function, refer to < UG221H-LE(R)4 OPERATING INSTRUCTIONS > ( INA-F6969 ) attached to UG221H-LE(R)4. About the way to set the screen data for SRAM/clock function, notes on using this function, refer to Chapter 24 SRAM in UG Series Manual < Function > ( FEH376 ) more detail. 10. List of Accessories The available accessories for UG221H-LE(R)4 are as follows: Model Description For UG221H-LE(R)4 UG00S-CW Editing software Available (Ver or later) UG00C-T Cable for screen data transfer Available UG00C-C Printer cable Unavailable UG00C-B Cable for bar code reader Available UG00C-H Cable for master of multi-link 2 Available UG221P-D4 FROM cassette Unavailable UG221P-SR SRAM cassette Unavailable UG00P-MR Card recorder Available UG00P-TC Terminal converter Unavailable UG00P-DI Dual port interface for MITSUBISHI PLC Available UG00P-U2 Serial extension I/O Available UG03I-x Communication interface unit Unavailable UG221P-PS Protection sheet Available 6

8 Fuji Electric Co., Ltd. ED & C.Drive Systems Company Gate City Ohsaki, East Tower 11-2, Osaki 1-chome, Shinagawa-ku, Tokyo, , Japan Phone: , 7136, 7137, 7138 Fax: , 7457, 7458, 7459 URL Information in this manual is subject to change without notice (PDF)