DS-RP-A AE-N-I-B DM-DCC-B DS-RP-B AE-ACK-B DM-PT-A DS-RPM-B AE-ASUM-B DM-PT-B DS-WP-A AE-INFO-B DM-TS-A DS-WP-B DM-DDB-B DM-UTC-B

Transcription

1 PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT (PICS) NB-GPC1 Date: September 14,2004 Vendor Name: American Auto-Matrix Product Name: NB-GPC1 Product Model Number: NB-GPC1 Application Software Version: 1.0 Firmware Revision: 1.0 BACnet Protocol Revision: 2 Product Description: The NB-GPC1 is a programmable, general purpose, Native BACnet controller. With a base configuration of twelve (12) universal inputs, one (1) digital pulse counting input, six (6) analog outputs, and six (6) digital outputs, the NB-GPC1 is capable of handling most control tasks. Using STATbus expansion modules, an additional twelve (12) universal inputs, three (3) digital pulse counting inputs, six (6) analog outputs, and six (6) digital outputs may be added to the controller in increments as small as a single input or output. In this way, the I/O profile of the NB-GPC1 can be built up to exactly meet the needs of your project while providing an easy avenue for future expansion. BACNET STANDARDIZED DEVICE PROFILE: BACnet Operator Workstation (B-OWS) BACnet Building Controller (B-BC) BACnet Advanced Application Controller (B-AAC) BACnet Application Specific Controller (B-ASC) BACnet Smart Sensor (B-SS) BACnet Smart Actuator (B-SA) BACNET INTEROPERABILITY BUILDING BLOCKS SUPPORTED: DS-RP-A AE-N-I-B DM-DCC-B DS-RP-B AE-ACK-B DM-PT-A DS-RPM-B AE-ASUM-B DM-PT-B DS-WP-A AE-INFO-B DM-TS-A DS-WP-B DM-DDB-B DM-UTC-B DS-WPM-B DM-DOB-B DM-RD-B SEGMENTATION CAPABILITY: Able to transmit segmented messages yes no Able to receive segmented messages yes no Window Size: Window Size: 1

2 STANDARD OBJECT TYPES SUPPORTED Dynamically Creatable Objects None Dynamically Deletable Objects None Properties Bold indicates writable properties Italics indicates optional properties.: Analog Input Analog Output Binary Input Binary Output present_value status_flags event_state reliability out_of_service units min_pres_value max_pres_value resolution time_delay notification_class high_limit low_limit deadband limit_enable event_enable acked_transitions notify_type event_time_stamps present_value status_flags event_state reliability out_of_service units min_pres_value max_pres_value resolution priority_array relinquish_default time_delay notification_class high_limit low_limit deadband limit_enable event_enable acked_transitions notify_type event_time_stamps present_value status_flags event_state reliability out_of_service polarity time_delay notification_class alarm_value event_enable acked_transitions notify_type event_time_stamps present_value status_flags event_state reliability out_of_service polarity minimum_off_time minimum_on_time priority_array relinquish_default time_delay notification_class feedback_value event_enable acked_transitions notify_type event_time_stamps 2

3 3 Device File Notification Class Program system_status vendor_name vendor_identifier model_name firmware_revision application_software_version protocol_version protocol_revision protocol_services_supported protocol_s_supp orted object_list max_apdu_length_accepted segmentation_supported local_time local_date utc_offset daylight_savings_status apdu_timeout number_of_apdu_retries max_master max_info_frames device_address_binding database_revision file_type file_size modification_date archive read_only file_access_method object-identifier object-name object-type notification-class, priority ack-required recipient-list object-identifier object-name object-type program-state program-change status-flags out-of-service

4 Proprietary Properties Analog Input Binary Input AE Alarm Enable DF Display Format GI GID of I/O Device IF Analog Output Input Filter Delay or Weighted Gain OF Input Offset RH Run Hours RL Run Limit SM Schedules to Follow ST Sensor Type SU Amount to Setup/Setback Alarm Limit TM Thermostat Multiplier CF DT Datatype Communication Failure Enable? FI Fire Position FP Interlock/Communication Failure Position AE Alarm Enable CV Current Digital Input Value DF Display Format GI GID of I/O Device IF Input Filter Delay or Weighted Gain IP Input Polarities LP Interlock Polarities OF Input Offset OI RE Overridden Digital Inputs Bitmap Inputs with Unreliable Values RH Run Hours RL Run Limit SM Schedules to Follow ST Sensor Type SU Amount to Setup/Setback Alarm Limit TM Thermostat Multiplier 1 Universal Inputs configured to read a digital signal. 2 Dedicated pulse counting inputs. GI GID of I/O Device IL Inputs for Interlocking MN Minimum Scaled Voltage MX Maximum Scaled Voltage UT Update Threshold 4

5 Binary Output Property Identifier # Description GI GID of I/O Device OU Actual Output State PW RH Run Hours Pulse Width when Output is On RL Run Hours Limit SI Power-On Stagger Interval SM Schedules to Follow FT Firmware Type IA Intrinsic Alarming ID Unit Number (ID) NM Daylight Saving End Month OS Kernel Version PD Power-Up Delay PF Priority for Fault Alarms PI Process ID for Alarms PN Priority for Normal Alarms Device PO Priority foroff-normal Alarms Property Identifier # Description BF Broadcast Fire? BS Broadcast Sync Time? BT Broadcast Time Interval CF Communication Failure Timeout CM Manufacturer CP Communication Speed CR Configure Remote I/O CT Controller Type DA Day of Week PS Power-up state RD Daylight Savings Start Day RM Daylight Savings Start Month RS Reset the Controller? SN Serial Number SR Flash Release Code ST Daylight Saving Start Time TF Time to Remain in Fire Mode UD Use Device VE Firmware Version DD Device Instance To Send Alarms To ZN Zone Number DE Default Enable ED Daylight Saving End Day EM Engineering Units ET Daylight Saving End Time FA Faults Detected FC Flash update count 5

6 Program $ Enable Single-Step Mode? $D Delay Time Remaining $E Error Code $N Number of Program Attributes $W Trappable Error Action %A Register A Value %B Register B Value %C Register C Value %D Register D Value %E Register E Value %F Register F Value %G Register G Value %H Register H Value %I Register I Value %J Register J Value %K Register K Value %L Register L Value %M Register M Value %N Register N Value %O Register O Value %P Register P Value 6

7 DATA LINK LAYER OPTIONS: BACnet IP, (Annex J) BACnet IP, (Annex J), Foreign Device ISO , Ethernet (Clause 7) ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8) ANSI/ATA 878.1, RS-485 ARCNET (Clause 8), baud rate(s): MS/TP master (Clause 9), baud rate(s): 9.6k, 19.2k, 38.4k, 57.6k MS/TP slave (Clause 9), baud rate(s): Point-To-Point, EIA 232 (Clause 10), baud rate(s): Point-To-Point, modem, (Clause 10), baud rate(s): LonTalk, (Clause 11), medium: Other: DEVICE ADDRESS BINDING: Is static device binding supported? Yes No (This is currently necessary for two-way communication with MS/TP slaves and certain other devices.) NETWORKING OPTIONS: Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc. Annex H, BACnet Tunneling Router over IP BACnet/IP Broadcast Management Device (BBMD) Does the BBMD support registrations by Foreign Devices? Yes No CHARACTER SETS SUPPORTED Indicating support for multiple character sets does not imply that they can all be supported simultaneously. ANSI X3.4 ISO (UCS-4) IBM /Microsoft DBCS ISO (UCS-2) JIS C 6226 ISO GATEWAY The NB-GPC1 does not support gateway functionality for any types of non-bacnet equipment/network(s). 7

8 8