BACnet Protocol Implementation Conformance Statement

Transcription

1 Date: April 1, 2013 Vendor Name: Blue idge Technologies International Product Name: Aperio Product Model Number: Z, P, K, I Application Software Version: NA Firmware evision: 1.1.x BAnet Protocol evision: rev. 12 Product : The Aperio ontroller Board is a general purpose lighting controller used across the Blue idge Technologies product line. This product supports native BAnet connecting directly to the MS/TP LAN. All standard MS/TP baud rates are supported. All B-AA required objects are supported. The quantities of each object available are dependent upon factory configuration since this Aperio ontroller Board can be provided in products that serve as few as two lighting zones up to products that serve 999 lighting zones. BAnet Standardized Device Profile (Annex L): BAnet Operator Workstation (B-OWS) BAnet Advanced Operator Workstation (B-AWS) BAnet Operator Display (B-OD) BAnet Building ontroller (B-B) BAnet Advanced Application ontroller (B-AA) BAnet Application Specific ontroller (B-AS) BAnet Smart Sensor (B-SS) BAnet Smart Actuator (B-SA) List all BAnet Interoperability Building Blocks Supported (Annex K): DS-P-B, DS-PM-B, DS-WP-B, DS-WPM-B, DS-OV-B, DS-OVU-B, AE-N-I-B, AE-AK-B, AE-INFO-B, SHED-I-B, DM-DDB-B, DM-DOB-B, DM-D-B, DM-TS-B, DM-UT-B Segmentation apability: Able to transmit segmented messages Window Size Able to receive segmented messages Window Size Standard Object s Supported: Objects are not creatable nor deletable using the reateobject or the DeleteObject services. Object/Property Support Matrix The following table summarizes the Object s/properties supported: Object Property Binary Analog Device alendar Schedule Value Value Object_Identifier Object_Name Page 1 of 5

2 Object_ System_Status Vendor_Identifier Model_Name Firmware_evision Application_Software_Version Protocol_Version Protocol_evision Protocol_Services_Supported Object_s_Supported Object_List Max_APDU_Length_Accepted Segmentation_Supported Local_Time Local_Date UT_Offset Daylight_Savings_Status APDU_Timeout Number_Of_APDU_etries Max_Master Max_Info_Frames Device_Address_Binding Database_evision onfiguration_files Last_estore_Time Backup_Failure_Timeout Present_Value Status_Flags Event_State Out_Of_Service Priority_Array * * elinquish_default * * Units Effective_Period Weekly_Schedule Execption_Schedule Schedule_Default List_Of_Object_Property_ef Priority_For_Writing eliability Out_Of_Service Notification_lass Event_Enable Acked_Transitions Notify_ Event_Time_Stamps Time_Delay Alarm_Value High_Limit Low_Limit Deadband Limit_Enabled Page 2 of 5

3 * For commandable values only. Binary Value Summary The following table summarizes the Binary Value Objects supported: ID 10yxxx 20y0xx 30y0xx 10000xx DIGITAL_INPUT_10yxxx LOAD_STATUS_20y0xx LINE_VOLTAGE_INPUT_30y0xx UN_OMMAND_10000xx xxx digital input instance from xx load status - 64 xx line voltage input instance 1-64 xx run command Indicates the status of a binary input, either on or off. Indicates whether a given load relay is open or closed. On indicates the relay is closed. Off indicates the relay is open. Indicates the status of a line voltage input, either on or off. ontrols mode of operation. On is when occupants are expected present. Off when occupants are expected not present. NOTE: For Present Value s, = ead-only, W = Writeable, = ommandable. ommandable values support Present Value Analog Value Summary The following table summarizes the Analog Value Objects supported: ID 10yxxx 10yy000 11yy000 ANALOG_INPUT_10yxxx O_TIME_O_MODE_10yy000 O_TIME_UNO_MODE_11yy000 from 0-8 xxx analog input instance from Indicates the status value of an analog input. Timer value used to count down time during occupied mode as occupancy timer times out. Timer value used to count down time during Units Present Value Page 3 of 5

4 12yy000 13yy000 DAY_HAVEST_SETPT_12yy000 OVEIDE_TIME_13yy000 unoccupied mode as occupancy timer times out. Daylight harvesting setpoint. Timer value in minutes used to count down time when override is initiated by the space occupant. Indicates the load status Foot andles 14yy000 LIGHT_LEVEL_14yy000 Percent of the respective relay. NOTE: For Present Value s, = ead-only, W = Writeable, = ommandable. ommandable values support alendar Summary The following table summarizes the alendar Objects supported: ID 1000xx ALENDA_1000xx xx calendar alendars for exception schedules. NOTE: For Present Value s, = ead-only, W = Writeable, = ommandable. ommandable values support W Schedule Summary The following table summarizes the Schedule Objects supported: ID 1000xx SHEDULE_1000xx xx schedule Schedules to be assigned to lighting channels. NOTE: For Present Value s, = ead-only, W = Writeable, = ommandable. ommandable values support W Data Link Layer Options: BAnet IP, (Annex J) BAnet IP, (Annex J), Foreign Device ISO , Ethernet (lause 7) ATA 878.1, 2.5 Mb. ANET (lause 8) ATA 878.1, EIA-485 ANET (lause 8), baud rate(s) MS/TP master (lause 9), baud rate(s): 9600, 19200, 38400, 57600, 76800, Page 4 of 5

5 MS/TP slave (lause 9), baud rate(s): Point-To-Point, EIA 232 (lause 10), baud rate(s): Point-To-Point, modem, (lause 10), baud rate(s): LonTalk, (lause 11), medium: BAnet/ZigBee (ANNE O) Other: Device Address Binding: Is static device binding supported? (This is currently necessary for two-way communication with MS/TP slaves and certain other devices.) Yes No Networking Options: outer, lause 6 - List all routing configurations, e.g., ANET-Ethernet, Ethernet-MS/TP, etc. Annex H, BAnet Tunneling outer over IP BAnet/IP Broadcast Management Device (BBMD) Does the BBMD support registrations by Foreign Devices? Does the BBMD support network address translation? Network Security Options: Yes No Yes No Non-secure Device - is capable of operating without BAnet Network Security Secure Device - is capable of using BAnet Network Security (NS-SD BIBB) Application-Specific s: Supports encryption (NS-ED BIBB) Server (NS-KS BIBB) haracter Sets Supported: Indicating support for multiple character sets does not imply that they can all be supported simultaneously. ISO (UTF-8) IBM /Microsoft DBS ISO ISO (US-2) ISO (US-4) JIS 0208 If this product is a communication gateway, describe the types of non-banet equipment/networks(s) that the gateway supports: Page 5 of 5