INTRODUCTION. To avoid the PHP7 conflicts use this OS image: STEP 1 - Parts List:
|
|
- Solomon Logan
- 5 years ago
- Views:
Transcription
1 INTRODUCTION These are enhanced instruction set to install RaspberryPints on a Raspberry Pi 2 Model B with use of an AlaMode card and Flow Meters from AdaFruit.com. I started with instruction set here: After running into several installation issues, I've kept track of the alternate commands and steps that I aggregated from the RaspberryPints forum here: Due to incompatibility with Stretch version of Debian, you will want to install RasberryPints on a "Jessie" version of prior. The issue is that the Stretch version is built for PHP7, which is not compatible with the design of RasberryPints. To avoid the PHP7 conflicts use this OS image: STEP 1 - Parts List: Follow parts list instructions as originally given Use Raspberry Pi 2 Model B: Use AdaFruit flow meters: STEP 2 - OS Installation: Download NOOBS from here: NOTES: 1) DO NOT install the OS onto the Pi with a network cable plugged in. The install process might pull down current OS version updates instead of having a true Jessie version installation.
2 2) If you are using a USB Wireless Network adapter, I recommend that it is plugged in PRIOR to starting the OS installation. The hardware could be setup automatically recognized and configured for you during OS installation. Continue OS installation as described here STEP 3 - OC Configuration: The configuration settings are all valid on the RPints web site. Follow instructions here: STEP 4 - Package installation: Start with updating current packages with these commands in succession: sudo apt-get clean sudo apt-get update sudo apt-get upgrade Install the LAMP stack and modules necessary to run Flow Meterswith these commands in succession: sudo apt-get install apache2 apache2-utils sudo apt-get install php5 libapache2-mod-php5 php5-xcache php5-mysql php5-curl php5-cli sudo apt-get install mysql-client mysql-server Setup of mysql-server will prompt for creation of MySQL root user password. WRITE IT DOWN. DO NOT FORGET THE PASSWORD The password is needed in later phpmyadmin installation steps
3 sudo a2enmod headers sudo a2enmod rewrite Configure Apache and PHP parameters and permissions sudo nano /etc/apache2/apache2.conf In this file, Change AllowOverride under <Directory /var/www/> from None to All sudo service apache2 restart sudo service mysql restart sudo chown -R www-data:www-data /var/www/html sudo chmod -R 775 /var/www/html Also add the admin user account pi to www-data group: sudo usermod -ag www-data pi sudo nano /var/www/phpinfo.php Add these lines, save and exit: <?php?> phpinfo(); sudo apt autoremove The previous command is just a cleanup step. Any errors can be ignored.
4 sudo apt-get install phpmyadmin During this phpmyadmin install, 1) you will be prompted for the web service to get configured automatically. The choices are apache2 and lighttpd. Chose apache2 since we were installing it anyway. 2) you will be prompted to configure the database with dbconfig-common. Choose YES. 3) you will be prompted for the root MySQL password. This is the password you were instructed to WRITE DOWN previously. cd /var/www/html sudo ln -s /usr/share/phpmyadmin phpmyadmin sudo nano /etc/apache2/apache2.conf Add the following line to the bottom of the apache2.conf file. Save and Exit. Include /etc/phpmyadmin/apache.conf sudo /etc/init.d/apache2 restart sudo apt-get install arduino python-serial python-mysqldb xdotool sudo apt-get install chromium-browser sudo apt-get install ttf-mscorefonts-installer x11-xserver-utils unclutter STEP 5 - Package Configuration Disable Screen blanking sudo vi /home/pi/.config/lxsession/lxde-pi/autostart Add the following lines at the bottom:
5 @xset s s --incognito --start-fullscreen localhost Reboot sudo reboot STEP 6 - Configure Pi for Flow Meters Download the AlaMode setup bundle: wget Unpack and install the alamode setup package: tar -xvzf alamode-setup.tar.gz cd alamode-setup sudo apt-get install dos2unix sudo dos2unix jessie-setup sudo./jessie-setup Set Pi boot configuration to correctly access the Alamode. sudo nano /boot/config.txt Add this to end of file, save, exit: enable_uart=0 NOTE: This previous line may need adjusted when you get to STEP 9. I have found multiple posts in the forum referencing the value of this line
6 needs to be either 0 or 1. I was successful with 0. STEP 7 - RaspberryPints Installation Delete the default apache page sudo rm /var/www/html/index.html If you get an error message stating that the file was not found, you can safely disregard the error. Download the most recent Raspberry Pints code from here: In your terminal window, browse to the location of the downloaded zip file and run these commands to unzip the files and move them to the web host folder: unzip RaspberryPints zip sudo mv RaspberryPints-2.0.1/* /var/www/html/ Update Permissions to the RPints files sudo chmod -R 777 /var/www sudo chmod -R 777 /var/www/html Edit the Flow Monitor script to reference the correct RPINTS web host folder. (This is needed as the default web host folder has changed since RPINTS was developed) sudo nano /var/www/html/python/flow_monitor.py
7 poursdir = '/var/www' Modify the line to read this: poursdir = '/var/www/html' path = '/var/www/includes/pours.php' Modify it to read this: path = '/var/www/html/includes/pours.php' Save and exit editing flow_monitor.py IF you are using AdaFruit flow meters, you need to edit the pulse count variables to more accurately register ounces poured. There are 2 files that need configuration for this. sudo nano /var/www/html/arduino/raspberrypints/raspberrypints.ino if ( pulsecount > 100 ) { Modify it to read this: if ( pulsecount > 35 ) Save and exit raspberrypints.ino sudo nano /var/www/html/includes/pours.php $amount = $PULSE_COUNT / 21120;
8 Modify it to read this: $amount = $PULSE_COUNT / 1700; Save and exit pours.php Reboot sudo reboot STEP 8 - RASPBERRY PINTS configuration Open this web page to begin the automated RPINTS application and database configuration: Follow original instructions as listed on this page: After the automated configuration, reboot and verify that the the RPINTS web page automatically loads on boot: sudo reboot If web page correctly displays on reboot, we will now shutdown to prepare the AlaMode setup and configuration. sudo shutdown -h now STEP 9 - Connect and Configure AlaMode board and Flow Meters With the power off, attach the AlaMode board to the Raspberry PI. To Power the Alamode and the rpi, set the 5V_link jumper to ON. View image below. This allows you to connect power to the alamode board to power both the alamode and the rpi. This is important as the flow meters will draw more power than the rpi can safely supply via GPIO
9 At this point, DO NOT connect the Flow meters to the AlaMode board yet. Having them connected now could cause errors during the board programming step. Power on the system by connecting power to the AlaMode board directly. Once fully booted up, close the web browser and open a terminal window. Disable this service: sudo systemctl stop serial-getty@ttyama0.service sudo systemctl disable serial-getty@ttyama0.service
10 Backup and and then configure the following file: sudo cp /boot/cmdline.txt /boot/cmdline.txt.bak sudo nano /boot/cmdline.txt Find and delete this text from the file: console=serial0,15200 sudo reboot Once fully rebooted, close the web browser. From the GUI, go to the Applictaino Menu -> Programming -> Arduino This opens a program for programming the AlaMode. Click File -> Open Browse to and open: /var/www/html/arduino/raspberrypints/raspberrypints.ino Edit line "const unint8_t numsensors = 4; with the number of taps you have Edit line "uint8_t pulsepin[]={8,9,10,11}; with the pin numbers assigned to the flow meters. MAKE A NOTE OF THE PINS AND TAPS you will need this information later. Save the.ino file but do not close Go to Tools -> Boards and select Alamode Go to Tools->Serial and click the box for the serial connection (there should only be one) If there is no selection for the serial connection, you may need to return to STEP 6 to modify /boot/config.txt so that enable_uart=1 In the menu bar there is a button that is a circle with an arrow in it -> Click that button to compile and upload the ino file to the Alamode board.
11 This is important, the alamode needs the code uploaded to it in order to read the flow meters. If you add meters you have to recompile and reupload. Shutdown the Raspberry PI and attach your flow meters. To connect the flow meter to the alamode: Pin1(red) -> Ground Pin2 (middle)-> Any digital pin Be sure to set this at the top of the Arduino code Pin3 -> VIN Here are example pictures of Flow Meters connected to the Alamode board: Power on the system by connecting power to the AlaMode board directly. Once fully booted up, close the web browser and open a terminal window.
12 cd /var/www/html/python sudo nano /var/www/html/python/flowmon DIR=/var/www/python Modify it to read this: DIR=/var/www/html/python Save and close flowmon file sudo nano /var/www/html/python/flow_meter.py poursdir = '/var/www/' Modify it to read this: poursdir = '/var/www/html' path = '/var/www/includes/pours.php' Modify it to read this: path = '/var/www/html/includes/pours.php' Safe and close flow_meter.py Now we are ready to start the python script and ensure it starts during reboots. sudo cp flowmon /etc/init.d sudo chmod a+x /etc/init.d/flowmon sudo /etc/init.d/flowmon start
13 Testing Flow Meter program and reads via this: ps aux grep flow_monitor.py The previous command should return line similar to this: pi ? S 15:35 0:00 /usr/bin/python /home/pi/raspberrypints/python/flow_monitor.py pi pts/0 S+ 15:43 0:00 grep color=auto flow_monitor.py sudo update-rc.d flowmon defaults sudo reboot STEP 10 RPINTS Administration setup In your browser, browse to Alternatively, you can also access the page from any machine on your network by browsing to Address of Pi>/admin Follow setup instructions as listed here:
Topics. What is a RaspberryPi? Why should I want one? What is Raspbian? What is SSH? What is FTP? What is LAMP? Making a LAMP Stack!
Topics What is a RaspberryPi? Why should I want one? What is Raspbian? What is SSH? What is FTP? What is LAMP? Making a LAMP Stack! What is a Raspberry Pi? The Raspberry Pi is a Credit Card sized computer.
More informationHow to Make a Raspberry Pi Web Server
2 Ways to Make a Raspberry Pi Web Server - wikihow http://www.wikihow.com/make-a-raspberry-pi-web-server of 5 08/5/203 :3 AM How to Make a Raspberry Pi Web Server If you are looking for a way to make a
More informationInstalling LAMP on Ubuntu and (Lucid Lynx, Maverick Meerkat)
Installing LAMP on Ubuntu 10.04 and 10.10 (Lucid Lynx, Maverick Meerkat) April 29, 2010 by Linerd If you're developing websites, it's nice to be able to test your code in the privacy of your own computer
More informationWe want to install putty, an ssh client on the laptops. In the web browser goto:
We want to install putty, an ssh client on the laptops. In the web browser goto: www.chiark.greenend.org.uk/~sgtatham/putty/download.html Under Alternative binary files grab 32 bit putty.exe and put it
More informationInstalling OptiRain Open on Raspbian
QUICKSMART Installing OptiRain Open on Raspbian QuickSmart Development P.O. Box 3689 Santa Clara, CA 95055 408-777-0944 www.quicksmart.com This document shows how to install OptiRain Open 2 on a Raspberry
More informationBelow are the steps to install Orangescrum Self Hosted version of Cloud Edition in Ubuntu Server Last Updated: OCT 18, 2018
Below are the steps to install Orangescrum Self Hosted version of Cloud Edition in Ubuntu Server Last Updated: OCT 18, 2018 Step 1 Download the Orangescrum Self Hosted version of CloudEdition Extract the
More informationApache MySQL PHP PHPAdmin Install
Apache MySQL PHP PHPAdmin Install Installing Apache 2 To only install the apache2 webserver, use any method to install apache2 It requires a restart for it to work sudo /etc/init.d/apache2 restart Checking
More informationL.A.M.P. Stack Part I
L.A.M.P. Stack Part I By George Beatty and Matt Frantz This lab will cover the basic installation and some configuration of a LAMP stack on a Ubuntu virtual box. Students will download and install the
More informationشرکت توسعه ارتباطات پردیس پارس. owncloud. The last file sharing platform you'll ever need
شرکت توسعه ارتباطات پردیس پارس owncloud The last file sharing platform you'll ever need. Explore the Features: Click Sync and Share Your Data, with Ease A Safe Home for All Your Data Your Data is Where
More informationCacti monitoring tool
Cacti monitoring tool Cacti is a web-based monitoring tool designed for easy-to-use front-end for the data logging software using RRDTool. It allows users to monitor services at regular interval of time
More informationDigital Free Library. Created by Kirby Griese. Last updated on :35:15 PM UTC
Digital Free Library Created by Kirby Griese Last updated on 2018-01-04 04:35:15 PM UTC Guide Contents Guide Contents Overview Parts Needed Preparation Prepare Micro SD Card Install Apache Configure Access
More informationViMP 2.0. Installation Guide. Verfasser: ViMP GmbH
ViMP 2.0 Installation Guide Verfasser: ViMP GmbH Table of contents About this document... 3 Prerequisites... 4 Preparing the server... 5 Apache2... 5 PHP... 5 MySQL... 5 Transcoding... 6 Configuration...
More informationObservium Enable your new virtual host 4
Observium Contents 1 Introduction 1 1.1 Goals................................. 1 1.2 Notes................................. 1 2 Observium installation 2 2.1 1. Installation based on offical instructions.............
More informationPiCloud. Building owncloud on a Raspberry PI
PiCloud Building owncloud on a Raspberry PI PiCloud - Building owncloud on a Raspberry PI by Sebastian Büttrich is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
More informationKollaborate Server. Installation Guide
1 Kollaborate Server Installation Guide Kollaborate Server is a local implementation of the Kollaborate cloud workflow system that allows you to run the service in-house on your own server and storage.
More informationOptiRain Open 2 Installation Guide for LInux. This guide provides general instructions for installing OptiRain Open 2 on a Linux based server.
QUICKSMART OptiRain Open 2 Installation Guide for LInux QuickSmart Development P.O. Box 3689 Santa Clara, CA 95055 408-777-0944 www.quicksmart.com This guide provides general instructions for installing
More informationPiCAN 2 GPS Rev B V1.0. PiCAN GPS USER GUIDE V1.0. PiCAN GPS CAN-Bus Board for Raspberry Pi. SK Pang Electronics Ltd
PiCAN GPS USER GUIDE V1.0 Product name Model number Manufacturer PiCAN GPS CAN-Bus Board for Raspberry Pi RSP-PICANGPS SK Pang Electronics Ltd 1 Contents Table of Contents 1. Introduction... 3 1.1. Features...
More informationRaspberry Pi Setup. 5 HDMI NightScout Display Notes: Instructions to switch to chromium-browser highlighted in yellow.
Raspberry Pi Setup 5 HDMI NightScout Display 2017-09-30 Notes: Instructions to switch to chromium-browser highlighted in yellow. Items Needed: Raspberry Pi with Debian Jessie loaded and configured. See
More informationIf you re the administrator on any network,
Let s do an inventory! If you re the administrator on any network, chances are you ve already faced the need to make an inventory. In fact, keeping a list of all the computers, monitors, software and other
More informationAlaMode User Manual Revision
AlaMode User Manual Revision 1.0 www.wyolum.com info@wyolum.com 1 Introduction The AlaMode is an integrated Arduino compatible board. It is designed as versatile, general purpose data acquisition and control
More informationRaspberry Pi Class Ed 299. Mike Davis Truman College 5/26/2015
Raspberry Pi Class Ed 299 Mike Davis Truman College 5/26/2015 Goals for Today Discuss Raspberry Camera Projects Fruit Rotting Air Powered Car Photo booth Use a Python Program to control the camera Copy,
More informationRaspberry Pi 3 Model B+ and JMRI with WiFi Access Point for Pi- SPROG One and Pi-SPROG Nano raspian-stretch build
Raspberry Pi 3 Model B+ and JMRI with WiFi Access Point for Pi- SPROG One and Pi-SPROG Nano 2018-03-13-raspian-stretch build May 2018 SPROG DCC These instructions describe the process of setting up a Raspberry
More informationThe Broadband Ham Net community has had a need for a stand alone time server for their meshes. This document will attempt to fill in this need.
Introduction: The Broadband Ham Net community has had a need for a stand alone time server for their meshes. This document will attempt to fill in this need. Some caveats to consider before embark on a
More informationAdafruit NFC/RFID on Raspberry Pi
Adafruit NFC/RFID on Raspberry Pi Created by Kevin Townsend Last updated on 2016-11-03 06:36:54 AM UTC Guide Contents Guide Contents Overview Freeing UART on the Pi Step One: Run raspi-conf Step Two: Disable
More informationRaspberry Pi NTP Clock Setup Guide
Raspberry Pi NTP Clock Setup Guide Several steps are involved in getting your Raspberry Pi to operate as a NTP Clock. To begin with, you must obtain a LCD Plate (www.adafruit.com) and build it. You must
More informationAdafruit NFC/RFID on Raspberry Pi
Adafruit NFC/RFID on Raspberry Pi Created by Kevin Townsend Last updated on 2018-08-22 03:31:24 PM UTC Guide Contents Guide Contents Overview Freeing UART on the Pi Step One: Run raspi-conf Step Two: Disable
More informationAdafruit Ultimate GPS on the Raspberry Pi
Adafruit Ultimate GPS on the Raspberry Pi Created by Kevin Townsend Last updated on 2017-07-28 03:08:38 PM UTC Guide Contents Guide Contents Introduction What you'll need: Setting Everything Up Hooking
More informationSetting up VPS on Ovh public cloud and installing lamp server on Ubuntu instance
Setting up VPS on Ovh public cloud and installing lamp server on Ubuntu instance What is OVH Public Cloud Public Cloud Instances provides a choice of two types of virtual machines: the RAM instances are
More informationInstalling FreePBX 13 on Debian 8.1
Installing FreePBX 13 on Debian 8.1 READ FIRST Manual installations of FreePBX is considered an EXPERTS ONLY exercise. This method of installation is enough to get CORE functionality of FreePBX. Non-commercial
More informationRaspberry Pi Tutorial 2
Raspberry Pi Tutorial 2 Date: 2/20/2014 Demonstrations: 1. John Mosser will demonstrate a motion sensor using a Raspberry Pi. 2. Alain Tschanz will demonstrate how to access and monitor your Raspberry
More informationInstalling Open Project on Ubuntu AWS with Apache and Postgesql
Installing Open Project on Ubuntu AWS with Apache and Postgesql Contents Installing Open Project on Ubuntu AWS with Apache and Postgesql... 1 Add new ports to your security group... 2 Update your system...
More informationInstallation guide. Step1. Install the OS for Raspberry Pi 3. Go to to download Raspbian to the PC.
Installation guide Step1. Install the OS for Raspberry Pi 3 Go to https://www.raspberrypi.org/downloads/ to download Raspbian to the PC. Unzip 2017-01-11-raspbian-jessie.zip and you will get a disc image
More informationSETTING UP 3 WORDPRESS SITES ON APACHE AND UBUNTU BY RAMI
SETTING UP 3 WORDPRESS SITES ON APACHE AND UBUNTU 14.04 BY RAMI SETTING UP 3 WORDPRESS SITES ON APACHE SERVER AND UBUNTU 14.04 THE SET UP This may be a little rough in some places because not all the terms
More informationPiCAN GPS + Gyro +Accelerometer USER GUIDE V1.0
PiCAN GPS + Gyro +Accelerometer USER GUIDE V1.0 Product name Model number Manufacturer PiCAN GPS + Gyro + Accelerometer CAN-Bus Board for Raspberry Pi RSP-PICANGPSACC SK Pang Electronics Ltd 1 Contents
More informationMacGyver IT: w/raspberry Pi 3 Kevin Capwell META Pat Zielke Viroqua
Kevin Capwell META Pat Zielke Viroqua DISCLAIMER: The open-source software discussed is provided "as is", without warranty of any kind, express or implied, including but not limited to the warranties of
More informationConfigure router. 26. Start AirPort Utility (located in the Utilities folder). The AirPort Utility window show a component diagram:
Configure router The Raspberry Pi 3 (RPi) should be assigned a fixed IP address in the router. After installing osmc for the first time, you should configure the router. 26. Start AirPort Utility (located
More informationHow To Start Mysql Use Linux Command Line Client In Xampp
How To Start Mysql Use Linux Command Line Client In Xampp It also assumes that you're familiar with the MySQL command-line client and that you And since both Amazon and Bitnami have a free tier, you can
More informationStep 1 - Install Apache and PostgreSQL
How to install OTRS (Open Source Trouble Ticket System) on Ubuntu 16.04 Prerequisites Ubuntu 16.04. Min 2GB of Memory. Root privileges. Step 1 - Install Apache and PostgreSQL In this first step, we will
More informationXLink Kai Raspberry Pi Beginners Tutorial
XLink-Kai-Raspberry-Pi-Beginners-Tutorial.md XLink Kai Raspberry Pi Beginners Tutorial Hi! This tutorial will guide you through setting up XLink Kai on a Raspberry Pi to play multiplayer system link Xbox
More informationRETROPIE INSTALLATION GUIDE
RETROPIE INSTALLATION GUIDE CONTENTS THE FOLLOWING GUIDE WILL COVER THE INSTALLATION, SETUP AND CONFIGURATION OF THE RASPBERRY PI, RASPBIAN OS AND RETROPIE Author: http://rpiarcadebuild.wordpress.com/
More informationRaspberry Pi as an Ad Blocking Access Point
Raspberry Pi as an Ad Blocking Access Point Created by Justin Cooper Last updated on 2017-12-05 07:26:38 PM UTC Guide Contents Guide Contents Overview Preparation Install Software Improving Performance
More informationPiCAN2 DUO ISO USER GUIDE V1.1. PiCAN 2 DUO ISO Rev B V1.1. PiCAN2 DUO CAN-Bus ISO Board for Raspberry Pi
PiCAN2 DUO ISO USER GUIDE V1.1 Product name Model number Manufacturer PiCAN2 DUO CAN-Bus ISO Board for Raspberry Pi RSP-PICAN2DUO-ISO SK Pang Electronics Ltd 1 Contents Table of Contents 1. Introduction...
More informationGetting started with Raspberry Pi (and WebIoPi framework)
Getting started with Raspberry Pi (and WebIoPi framework) 1. Installing the OS on the Raspberry Pi Download the image file from the Raspberry Pi website. It ll be a zip file as shown below: Unzip the file
More informationBuilding a standalone access point using a Raspberry Pi Zero W
Building a standalone access point using a Raspberry Pi Zero W by Barry Robinson The Raspberry Pi Zero W is a small, single board computer (SBC) that has WiFi and Bluetooth connectivity built-in. It is
More informationGMU Specifications And Installation Procedures Page 1 04/04/08. JBM Gateway Management Utility Server Specifications And Installation Procedures
And Installation Procedures Page 1 04/04/08 JBM Gateway Management Utility Server Specifications And Installation Procedures And Installation Procedures Page 2 04/04/08 GMU Specifications... 3 Recommended
More informationGNSS Logger Unit with RTKLIB. Tiphat Areeyapinun Shizuoka University
GNSS Logger Unit with RTKLIB Tiphat Areeyapinun Shizuoka University 1 GNSS Logger Unit with RTKLIB 2 Objective To record GNSS RAW data directly from a receiver module for post processing Small footprint
More informationBitnami Pimcore for Huawei Enterprise Cloud
Bitnami Pimcore for Huawei Enterprise Cloud Description Pimcore is the open source platform for managing digital experiences. It is the consolidated platform for web content management, product information
More informationInstalling FreePBX 2.11 on Ubuntu Server (Precise Pangolin)
Installing FreePBX 2.11 on Ubuntu 12.04 Server (Precise Pangolin) Install Ubuntu 12.04 Server LTS 32 or 64-bit Commercial Modules Commercial modules and add-ons are not currently supported on the Ubuntu
More informationOpenEMR INSTALLATION AND UPGRADE Quick guide
OpenEMR INSTALLATION AND UPGRADE Quick guide Preliminary documentation September 2 nd, 2009 Updated February 1 st, 2010 Amended on July 13 th, 2010 Amended September 22, 2010 Page 1 of 19 Preliminary notes
More informationInstallation of RedHawk 6.5-r24.2 on the Jetson TX1 Development Board Release Notes. September 19 th, 2017
Installation of RedHawk 6.5-r24.2 on the Jetson TX1 Development Board Release Notes September 19 th, 2017 This page intentionally left blank 1. Introduction This document describes the process of installing
More informationInstall latest version of Roundcube (Webmail) on CentOS 7
Install latest version of Roundcube (Webmail) on CentOS 7 by Pradeep Kumar Published December 14, 2015 Updated August 3, 2017 Roundcube is a web browser based mail client & also known as webmail. It provides
More informationInstalling MediaWiki using VirtualBox
Installing MediaWiki using VirtualBox Install VirtualBox with your package manager or download it from the https://www.virtualbox.org/ website and follow the installation instructions. Load an Image For
More informationBitnami HHVM for Huawei Enterprise Cloud
Bitnami HHVM for Huawei Enterprise Cloud Description HHVM is an open source virtual machine designed for executing programs written in Hack and PHP. HHVM uses a just-in-time (JIT) compilation approach
More informationK-RATE INSTALLATION MANUAL
K-RATE INSTALLATION MANUAL K-Rate Installation Manual Contents SYSTEM REQUIREMENTS... 3 1. DOWNLOADING K-RATE... 4 STEP 1: LOGIN TO YOUR MEMBER ACCOUNT... 4 STEP 2: ENTER DOMAIN NAME... 5 STEP 3: DOWNLOAD
More informationApache Manual Install Ubuntu Php Mysql. Phpmyadmin No >>>CLICK HERE<<<
Apache Manual Install Ubuntu Php Mysql Phpmyadmin No Ubuntu 14.10 LAMP server tutorial with Apache 2, PHP 5 and MySQL (MariaDB) Additionally, I will install phpmyadmin to make MySQL administration easier.
More informationCommunication protocols and services
This chapter describes various protocols and that may be enabled on Modberry. SSH Connection SSH service is started up on boot and already preinstalled and configured. You may access your device through
More informationAutomated Internet vending system for the Raspberry Pi
Automated Internet vending system for the Raspberry Pi 1. General information readyvoucher rpi is a complete Internet access vending system used to generate and print vouchers for hotspot access using
More informationInstallation Manual InfraManage.NET Installation Instructions for Ubuntu
Installation Manual InfraManage.NET Installation Instructions for Ubuntu Copyright 1996 2017 Timothy Ste. Marie Version 7.5.72SQL InfraManage.NET Installing InfraManage.NET Page 1 of 78 Table of Contents
More informationExercises. Notes: Exercise 1. Install the Cacti Plugin Architecture (Cacti PA)
AfNOG 2010 Network Management Tutorial Cacti Additional Exercises: - Plugin Architecture - Settings Plugin o Email to Request Tracker - Installing and Configuring the thold Plugin - CDEFs (Control DEFinitions)
More informationStep By Step Ubuntu (Precise) LAMP Server Setup
Step By Step Ubuntu 12.04 (Precise) LAMP Server Setup May 21, 2012 In around 15 minutes, the time it takes to install Ubuntu Server Edition, you can have a LAMP (Linux, Apache, MySQL and PHP) server up
More informationSchool of Information and Computer Technology Sirindhorn International Institute of Technology Thammasat University
School of Information and Computer Technology Sirindhorn International Institute of Technology Thammasat University ITS351 Database Programming Laboratory Laboratory #1: HTML & CSS Objective: - To introduce
More informationLinux Essentials Objectives Topics:
Linux Essentials Linux Essentials is a professional development certificate program that covers basic knowledge for those working and studying Open Source and various distributions of Linux. Exam Objectives
More information#Uncomment the second line to enable any form of FTP write command. #write_enable=yes
Installing and configuring Apache 2 in Linux Please note that dashes (-) are used to indicate what you should type, they should not be included in the command. Install Linux on an old desktop, dual core
More informationApache Manual Install Ubuntu Php Mysql >>>CLICK HERE<<<
Apache Manual Install Ubuntu Php Mysql Phpmyadmin 12.04 Lts I'll be working from a Liquid Web Core Managed Ubuntu 14.04 LTS server, and I'll be logged in as root. A LAMP, Linux, Apache, MySQL and PHP,
More informationYou will need to know the IP address or the hostname of the pi (as discussed above) to continue and login to your pi via putty over Ethernet.
MEGR3092 Advanced Motorsports Instrumentation. Raspberry pi project. V0.38 10/4/16 Logger build guide: You will likely find this easier with a HDMI cord and a usb keyboard. If those are not available,
More informationDatabase Backup Restore
The following describes how to restore the controller database after a failed upgrade, and reinstall the upgrade., page 1 If a controller upgrade fails, you can uninstall the upgrade, restore the controller
More informationBitnami Ruby for Huawei Enterprise Cloud
Bitnami Ruby for Huawei Enterprise Cloud Description Bitnami Ruby Stack provides a complete development environment for Ruby on Rails that can be deployed in one click. It includes most popular components
More informationWallet Installation Guide for Staking on Raspberry PI
Wallet Installation Guide for Staking on Raspberry PI V2.1 November 2018 CONTENTS 01. Version History... 13 02. Introduction... 3 03. Prerequisites... 13 04. Installation Steps... 6 05. Add an address
More informationPiCAN 2 USER GUIDE V1.2
PiCAN 2 USER GUIDE V1.2 Product name Model number Manufacturer PICAN CAN-Bus Board for Raspberry Pi RSP-PICAN2 SK Pang Electronics Ltd 1 Contents Table of Contents 1. Introduction... 3 1.1. Features...
More informationUDRC Step by Step Installation Process as Completed by Rich KR4PI
UDRC Step by Step Installation Process as Completed by Rich KR4PI Setup basic image: Download image from archive.compaslinux.org Use Win32Diskmanager to install downloaded image to SD card Basic Image
More informationHome security with Raspberry Pi, not only with Zoneminder
Home security with Raspberry Pi, not only with Zoneminder As you probably already know you can have a cheap monitoring system with cameras and email notifications using Raspberry Pi and Zoneminder. Although
More informationAlarm Counter. A Ceilometer OpenStack Application
Alarm Counter A Ceilometer OpenStack Application Tejas Tovinkere Pattabhi UTD VOLUNTEER AT AWARD SOLUTIONS Summer 2015 Contents Alarm Counter 1 Introduction...2 2 Pre-Requisites...2 2.1 Server Creation...
More informationManually Password Protect Directories Apache Ubuntu
Manually Password Protect Directories Apache Ubuntu Apache can be configured to force users to login before being Password protection can be useful for securing a directory that planning to edit them manually,
More informationAdafruit's Raspberry Pi Lesson 1. Preparing an SD Card for your Raspberry Pi
Adafruit's Raspberry Pi Lesson 1. Preparing an SD Card for your Raspberry Pi Created by Simon Monk Last updated on 2016-12-03 03:20:15 AM UTC Guide Contents Guide Contents Overview You Will Need Downloading
More information3.2 / 3.5 Touch-Display
Ausgabe 13.10.2017 Copyright by Joy-IT 1 Index 1. Connection 2. Installing the software 3. Using the buttons on the 3.2 TFT 4. Calibrating the touchscreen 5. Simultaneously using the LCD and the HDMI output
More informationInstall Apache, PHP And MySQL On CentOS 7 (LAMP)
Install Apache, PHP And MySQL On CentOS 7 (LAMP) Version 1.0 Authors: Till Brehm , Falko Timme Updates: Srijan Kishore Follow Howtoforge
More informationChapter. NagVis. Nagios, 2nd Edition (C) 2008 by Wolfgang Barth
18 Chapter NagVis NagVis 1 is an addon for Nagios that displays host and service states against a background image selected by the user. This must be available in the PNG format; the choice is yours whether
More informationAdafruit's Raspberry Pi Lesson 6. Using SSH
Adafruit's Raspberry Pi Lesson 6. Using SSH Created by Simon Monk Last updated on 2017-08-16 01:12:07 AM UTC Guide Contents Guide Contents Overview Enabling SSH Using a blank boot file Using Raspi-Config
More informationBitnami Moodle for Huawei Enterprise Cloud
Bitnami Moodle for Huawei Enterprise Cloud Description Moodle is a Course Management System that is designed using sound pedagogical principles to help educators create effective online learning communities.
More informationLab 0: Intro to running Jupyter Notebook on a Raspberry Pi
Lab 0: Intro to running Jupyter Notebook on a Raspberry Pi Nick Antipa, Li-Hao Yeh, based on labs by Jon Tamir and Frank Ong January 24, 2018 This lab will walk you through setting up your Raspberry Pi
More informationBitnami ez Publish for Huawei Enterprise Cloud
Bitnami ez Publish for Huawei Enterprise Cloud Description ez Publish is an Enterprise Content Management platform with an easy to use Web Content Management System. It includes role-based multi-user access,
More informationAWS/LAMP/Wordpress/Bootstrap Extravaganza. I am determined to make this shit fun.
AWS/LAMP/Wordpress/Bootstrap Extravaganza I am determined to make this shit fun. Agenda What is AWS? Launch your instance Deploy LAMP stack Install Wordpress Bootstrap it Q&A What is AWS? Amazon Web Services
More informationBitnami Coppermine for Huawei Enterprise Cloud
Bitnami Coppermine for Huawei Enterprise Cloud Description Coppermine is a multi-purpose, full-featured web picture gallery. It includes user management, private galleries, automatic thumbnail creation,
More informationBitnami ProcessMaker Community Edition for Huawei Enterprise Cloud
Bitnami ProcessMaker Community Edition for Huawei Enterprise Cloud Description ProcessMaker is an easy-to-use, open source workflow automation and Business Process Management platform, designed so Business
More informationQuick Reference Tables
Quick Reference Tables Chapter 1 Raspberry Pi Startup Command Quick Reference Table Command startx sudo sudo shutdown -h now sudo shutdown -r now Launches the Raspbian desktop environment (GUI). Gives
More informationHow To Start Mysql Using Linux Command Line Client In Ubuntu
How To Start Mysql Using Linux Command Line Client In Ubuntu Step One: Install MySQL Client On Debian, Ubuntu or Linux Mint: Before you start typing commands at the MySQL prompt, remember that each In
More informationBitnami Piwik for Huawei Enterprise Cloud
Bitnami Piwik for Huawei Enterprise Cloud Description Piwik is a real time web analytics software program. It provides detailed reports on website visitors: the search engines and keywords they used, the
More informationInitial setting up of VPN Java version.
VPN Linux 64 bit To access work documents from home you will need to create a VPN connection. This will allow you to securely connect to Exeter University network from other location such as your home.
More informationRaspberry Pi 3 Model B and JMRI with WiFi Access Point for Pi-SPROG One and Pi-SPROG Nano raspian-jessie build
Raspberry Pi 3 Model B and JMRI with WiFi Access Point for Pi-SPROG One and Pi-SPROG Nano 2017-04-10-raspian-jessie build June 2017 SPROG DCC These instructions describe the process of setting up a Raspberry
More informationCYVA Research. Raspberry Pi MQTT Configuration
CYVA Research Raspberry Pi MQTT Configuration 2018 CYVA Research Corporation. All rights reserved. 1 of 28 Table of Contents Introduction...3 Raspbian OS Build...3 From Linux...3 NOOBS Installation Instructions...4
More informationcommands exercises Linux System Administration and IP Services AfNOG 2015 Linux Commands # Notes
Linux System Administration and IP Services AfNOG 2015 Linux Commands # Notes * Commands preceded with "$" imply that you should execute the command as a general user not as root. * Commands preceded with
More informationHow To Start Mysql Use Linux Command Line Client In Ubuntu
How To Start Mysql Use Linux Command Line Client In Ubuntu Getting started with MySQL for web and server applications on Ubuntu 14.04 LTS (Trusty Tahr). get started with MySQL on an Ubuntu 14.04 LTS (Trusty
More informationInstalling FreePBX 14 on CentOS 7
Installing FreePBX 14 on CentOS 7 READ FIRST Manual installations of FreePBX is considered an EXPERTS ONLY exercise. This method of installation is enough to get CORE functionality of FreePBX. Non-commercial
More informationBitnami Re:dash for Huawei Enterprise Cloud
Bitnami Re:dash for Huawei Enterprise Cloud Description Re:dash is an open source data visualization and collaboration tool. It was designed to allow fast and easy access to billions of records in all
More informationInstall the Marionnet network simulator on Kali Linux Light vbox-i686
Install the Marionnet network simulator on Kali Linux Light 2017.1-vbox-i686 August 26, 2017 by Lucian Visinescu (this work is licensed under CC BY-NC 4.0) This installation is based on Install the Marionnet
More informationBitnami Tiny Tiny RSS for Huawei Enterprise Cloud
Bitnami Tiny Tiny RSS for Huawei Enterprise Cloud Description Tiny Tiny RSS is an open source web-based news feed (RSS/Atom) reader and aggregator, designed to allow you to read news from any location,
More informationSimulation Manager Configuration Guide
Cornell University College of Veterinary Medicine Student Training Simulation Project Simulation Manager Configuration Guide 2018-Oct-1 Version 1.9 Prepared by: I-Town Design David Weiner 117 Burleigh
More informationK-SEARCH TRIAL INSTALLATION MANUAL
K-SEARCH TRIAL INSTALLATION MANUAL Qsoft Inc, 2006-2009, All Rights Reserved Page 1 of 32 K-Search Trial Installation Manual Contents SYSTEM REQUIREMENTS... 3 1. DOWNLOADING K-SEARCH 15 DAYS TRIAL... 4
More informationAdafruit Ultimate GPS on the Raspberry Pi
Adafruit Ultimate GPS on the Raspberry Pi Created by Kevin Townsend Last updated on 2016-03-28 04:33:14 PM EDT Guide Contents Guide Contents Introduction What you'll need: Setting Everything Up Hooking
More informationDavide Cavaliere 18 th February 2017
Davide Cavaliere www.monocilindro.com dadez87@gmail.com 18 th February 2017 This guide explains how to set in read mode your Raspberry Pi 3, running the latest Raspbian Jessie (January 2017). This feature
More information