Overview for Axxia 5600 and Axxia 6700
|
|
- Antony O’Brien’
- 5 years ago
- Views:
Transcription
1 Overview for Axxia 5600 and Axxia 6700 Axxia Systems use a 3 stage boot process to initialize the system and allow an operating system to be loaded. 1. The first stage is part of the asic and loads the Secondary Program Loader (SPL) into the asic s local memory. If the secure boot feature is enabled, it will verify and optionally decrypt the SPL before transferring control to it. If the redundant boot feature is enabled, the SPL image to load will be selected based on the sequence number of the available images and the cause of the last reset. As the first stage is not based on U-Boot, and cannnot be modified, it is not discussed here. In the 5600 or 6700 simulation environment, a binary of the bootrom will be provided. 2. After control is transferred to the SPL, system memory is initialized and U-Boot is loaded into system memory. 3. Once control is transferred to U-Boot, a prompt is available on uart0. Local Builds and Modifications Build Environment It is assumed that a Linux host is used to build and that tools are avilable to target aarch64. The cross compilation tools, mentioned above, should be in the PATH and CROSS_COMPILE should contain the proper prefix. SYSROOT should point to the tools sysroot for arm if required by the tools. ARCH should be set to arm64. The secure moniotor from the Axxia ARM trusted firmware repository ( is required. To build it, see the wiki for that repository. A Clone of the Axxia U-Boot Repository To get a local copy of the Axxia U-Boot source tree, do the following. Use the axxia-dev branch. $ git clone $ cd axxia_u-boot $ git checkout --track -b axxia-dev origin/axxia-dev When updates or available, 1
2 $ git checkout axxia-dev $ git pull Specific Releases [Optional] If you want a previously released version of Axxia U-Boot, based on a commit or a tag, do the following. Determine the Tag Name or Commit Number To list the available tags, $ git tag egrep 'axxia' To list commits. $ git log Create the Branch To create a branch based on a tag or commit, do the following. $ git checkout axxia-dev Then, $ git checkout -b <name of the new branch> <tag name OR commit number> Build $ make <board type>_defconfig Where is one of the following. * axm5600_sim * axm5600_emu * axm5600 * axc6700_sim * axc6700_emu * axc6700 Copy bl31.o (as described above, see the Readme section of the Axxia ATF wiki at to the spl directory. Note that you may have to create the spl directory. $ make $./tools/mkimage -A arm64 -T firmware -C none -a 0 -e 0 -n XLOADER \ -d spl/u-boot-spl.bin spl/u-boot-spl.img $./tools/mkimage -A arm64 -T firmware -C none -a 0 -e 0 -n XLOADER \ 2
3 -d u-boot.bin u-boot.img To use the SSP DMA feature in the boot rom, change the -e 0 option above when creating u-boot-spl.img as follows. Do not change any options when creating u-boot.img. For emulation, -e 0x For simulation or the hardware, -e 0x u-boot.img is U-Boot. spl/u-boot-spl.img is the SPL. Updating the SPL and U-Boot Simulation Copy u-boot-spl.img and u-boot.img to the simulation directory. Emulation or Hardware Using the External Host to Update Serial Flash The SPL and U-Boot can be written to serial flash from the external host. First load the RTE on the external host, then do the following. $ ncpbootmem -a write -r prom -o 0 <u-boot-spl.img> $ ncpbootmem -a write -r prom -o 0x80000 <binary parameter file> $ ncpbootmem -a write -r prom -o 0x <u-boot.img> Using U-Boot If you can get to the U-Boot prompt, update the SPL, parameters, and U-Boot as follows. Note that getting images into memory could be accomplished using the network interface (dhcp, tftp), an external host, or a JTAG debugger. => sf probe 0 => sf erase <copy the SPL image into memory at $(loadaddr)> => sf write $(loadaddr) => sf erase <copy the binary parameter file into memory at $(loadaddr)> => sf write $(loadaddr) => sf erase <copy the U-Boot image into memory at $(loadaddr)> => sf write $(loadaddr)
4 Using a Debugger A script for DS-5 is avaialable to boot a system with no external host and nothing written to flash. To use it, clone the Axxia errata repository at and use the associated wiki, to do the following. Add configuration databases to DS-5 for Import the script at /ds5/scripts/axm56xx_bringup.ds. Follow the comments in the script to boot U-Boot on the target. Use U-Boot, as described above and in the script comments, to write the SPL, parameters, and U-Boot to serial flash. Booting a Linux Image Use the build instructions at [ Put linux.fit, from the above, in memory at the load address. In simulation, linux.fit should only contain the Linux kernel. For emulation or hardware, linux.fit should contain the Linux kernel and the device tree. In simulation, copy the device tree binary to the simulation directory. In emulation or hardware, this can be accomplished using the network, a copy from serial flash, usb, etc. Once linux.fit is in memory, bootm $(loadaddr) will start Linux. Appendices Parameters and the U-Boot Environment Unless mentioned here, there are no changes to the meaning of U-Boot environment variables. U-Boot documentation is avaible at Boot/Documentation. Not all compile time options are enabled, and the list of enabled options varies by target, board, and instance. Some input is required by the SPL to, for example, set the voltage, clocks, initialize system memory, etc. All such input is stored in a parameter file. The parameter file is generated by the ASE. It is stored in serial flash. In some cases, baud rate for example, there are compile time settings, a parameter, and an environment setting. When that is the case, the following sequence and precedence holds. Until the parameter file is available, the compile time setting is used. Once the parameter file is available, the value in it us used. Finally, if the environment contains a setting, that is used. 4
5 Baud Rate In the header file for each target, CONFIG_BAUDRATE sets the initial baud rate used by the SPL. If there are errors reading the parameter file, they will be sent to the console at this speed. If the baud rate parameter value is 0x , indicating that there should be no change, nothing will change, otherwise, the baud rate will be changed to the value indicated. Since it is possible to start the boot process with U-Boot, skipping the SPL, U-Boot will follow the same sequence. It will begin with CONFIG_BAUDRATE, read the parameter file and switch to it. Finally, there is the U-Boot environment. Note that once baudrate is set, it cannot be deleted. If baudrate is set, U-Boot will use that value once the environment is available. QoS Control Settings (6700 Only) On 6700, the QoS control registers for the A53 clusters can be controlled by setting the following environment variables. cluster_0_qos, cluster_1_qos, etc. The valid bits are 0xf007f, as described in the register documentation. A Sample U-Boot Environment Following is an example U-Boot environment that is used by LSI to verify U-Boot releases. setenv baudrate 9600 setenv bootargs root=/dev/nfs rw mem=2g console=ttyama0 ip=dhcp setenv bootcmd setenv autoload ; dhcp ; bootm setenv bootdelay 5 setenv ethact NEMAC setenv ethaddr <board's MAC address> fdt_high=0x initrd_high=0x setenv loadaddr stderr=serial stdin=serial stdout=serial 5
6 Using EIOA as a Network Interface U-Boot can use Ethernet ports in EIOA for network connectivity. GMAC 0-4 and can be used as follows. U-boot Environment U-boot environment to setup gmac18 to 1G. setenv ethact LSI_EIOA setenv eioaport gmac4 setenv macspeed 1G setenv phymedia copper Possible Values eioaport gmac[0-4,16-18]. macspeed 1G. phymedia copper phy_address Value of phy address when phymedia is copper. 6
Use U-Boot. U-Boot Main Commands. U-Boot script capability
Use U-Boot U-Boot Main Commands setenv this command is used to set variables saveenv this command saves variables previously set in the environment permanent storage space printenv this command print the
More informationLTIB for i.mx28, a step-by-step guide
LTIB for i.mx28, a step-by-step guide Note: This guide shows how to get a target system building and running on an i.mx28 EVK board. Install LTIB Configure and build First time configuration LTIB configuration
More information400AP Application Note Uploading Firmware Images to 400AP NAND Flash Models
June 2014 400AP Application Note Uploading Firmware Images to 400AP NAND Flash Models Author: Thomas W. Heck, Sr. Design Engineer Janus Remote Communications Table of Contents Overview..................................................................................
More informationItem Number Item Name Qty conga-qeval/qseven each
1 Subject Affected Products conga-qmx6 Subject Quick Start Guide Date (dd.mm.yy) 17.05.13 Author MSW 2 Affected Article Numbers Article Number(s) Numerous Product conga-qmx6 (hardware revision B.1) 3 Information
More informationphycore -XScale/PXA270 Development Kit (KPCM-027) Loading a Linux Image (demo.img)
phycore -XScale/PXA270 Development Kit (KPCM-027) Loading a Linux Image (demo.img) This Application Note provides instructions on how to start-up the phycore-pxa270, download U-Boot to the phycore-pxa270
More informationUser s Manual for the Boundary Devices Nitrogen R board
1 User s Manual for the Boundary Devices Nitrogen R board July 6, 2010 2 1 Revision History Date Revision Description 2010-06-17 1.0 First (rough) draft 2010-06-25 1.1 Still rough. Additional details on
More informationMCAM335x Linux User's Guide
Pag. 1 of 17 MCAM335x Linux User's Guide Pag. 2 of 17 Contents MCAM335x Linux User's Guide... 1 About this Manual... 4 Installation... 4 Introduction... 4 Prerequisites... 4 Install LSP packages... 5 U
More informationGlomation. Embedded Single Board Computer GESBC-3130S User s Manual
Glomation Embedded Single Board Computer GESBC-3130S User s Manual Table of Contents Chapter 1 Introducing the GESBC-3130S Single Board Computer... 4 GESBC-3130S Overview... 4 Advanced Features... 4 LPC-3130...
More informationParallella Linux - quickstart guide. Antmicro Ltd
Parallella Linux - quickstart guide Antmicro Ltd June 13, 2016 Contents 1 Introduction 1 1.1 Xilinx tools.......................................... 1 1.2 Version information.....................................
More informationLinux Port to LatticeMico32 System Quick-Start Guide
Linux Port to LatticeMico32 System Quick-Start Guide Lattice Semiconductor Corporation 5555 NE Moore Court Hillsboro, OR 97124 (503) 268-8000 February 2008 Copyright Copyright 2008 Lattice Semiconductor
More informationOxalis Getting Started
Oxalis Getting Started Document: Document: Getting Started Content of the document: Version: 001 First steps to power up, the board, to run uboot, Creator: ANT/MSB build kernel and boot linux. Date: 01.12.2018
More informationBootloader commands - Openmoko
Wiki Docs Planet Projects Lists Bootloader commands From Openmoko English عربي Български Česky Deutsch Eesti Español فارسی suomi Français Ελληνικά עברית Magyar Italiano 日本語 한국어 Nederlands Polski Português
More informationU-Boot and Linux Kernel Debug using CCSv5
U-Boot and Linux Kernel Debug using CCSv5 In this session we will cover fundamentals necessary to use CCSv5 and a JTAG to debug a TI SDK-based U-Boot and Linux kernel on an EVM platform. LAB: http://processors.wiki.ti.com/index.php/sitara_linux_training:_uboot_linux_debu
More information9.5.1 Compiling and Installing
kernel by the same name as the previous item from the first partition of the first hard disk, hd0. For each configuration, the root= option indicates the device where the booting kernel will find its root
More informationFlashing binaries to DRA7xx factory boards using DFU
Flashing binaries to DRA7xx factory boards using DFU Abstract This application notes provides detailed procedure for flashing the binary images to emmc flash memory using Device Firmware Update (DFU).
More informationUPGRADING THE ARCTIC FIRMWARE
Viola Systems Ltd. tel +358-(0)201-226 226 Lemminkäisenkatu 14-18B fax +358-(0)201-226 220 FIN-20520, Turku e-mail support@violasystems.com Finland APPLICATION NOTE VA-09-5-2 UPGRADING THE ARCTIC FIRMWARE
More informationARM Trusted Firmware: Changes for Axxia
ARM Trusted Firmware: Changes for Axxia atf_84091c4_axxia_1.39 Clean up klocwork issues, Critical and Error only, and only in code added to support Axxia. atf_84091c4_axxia_1.38 Allow non-secure access
More informationBootloader D. Balakrishna, Research Associate, IIIT-H Bootloaders are important when we are developing embedded systems, depending on the capabilities of the board and processor on which an embedded system
More informationQ7M EVK (Q7M120
Q7M120-120-EVK (Q7M120 and Q7B120) BSP Linux User s Manual Disclaimers This manual has been carefully checked and believed to contain accurate information. Axiomtek Co., Ltd. assumes no responsibility
More informationGetting Started U-boot
Getting Started U-boot Document Description Keywords Abstract U-boot, lpc2294 This document is a simple user guide for how to use u-boot on lpc2294 mcu: setup u-boot and toolkit; make and program the image
More informationGLOMATION. Embedded Single Board Computer GESBC-9G10 User s Manual
GLOMATION Embedded Single Board Computer GESBC-9G10 User s Manual Table of Contents Chapter 1 Introducing the GESBC-9G10 Single Board Computer... 4 GESBC-9G10 Overview... 4 Advanced Features... 4 AT91SAM9G10...
More informationDNP/2110 Linux Starter Kit: First Steps
DNP/2110 Linux Starter Kit: First Steps The DIL/NetPC DNP/2110 starter kit contains everything you need to get started with your Intel PXA255 Xscale-based embedded networking application. The starter kit
More informationDTK2410 Specification
version 1.0 DIGNSYS Inc. FEATURES Hardware DTK2410 reference board Reference board for embedded application SAMSUNG S3C2410 MCU NOR/NAND Flash and SDRAM USB host and device UART interface JTAG interface
More informationIntel Stratix 10 SoC FPGA Boot User Guide
Intel Stratix 10 SoC FPGA Boot User Guide Updated for Intel Quartus Prime Design Suite: 18.1 Subscribe Latest document on the web: PDF HTML Contents Contents 1. Introduction... 4 1.1. Glossary...4 1.2.
More informationHow to Recover the OS7030
How to Recover the OS7030 What you will need: - You will need to make up a serial cable to connect to the SIO connector inside the OS7030. PC serial port OS7030 SIO Connector 9 Pin D Sub Female connector
More informationUPGRADING ARCTIC CONTROL S FIRMWARE
Viola Systems Ltd. tel +358-(0)201-226 226 Lemminkäisenkatu 14-18A fax +358-(0)201-226 220 FIN-20520, Turku e-mail support@violasystems.com Finland APPLICATION NOTE VA-10-1-2 UPGRADING ARCTIC CONTROL S
More informationDS2 Products Auto-Update Tool BSP
1.01-05192015-174700 USER GUIDE DS2 Products Auto-Update Tool BSP V1.3 Copyright Copyright 2013 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted,
More informationMBL Users Manual For EV44B0-II Board
For EV44B0-II Board MICETEK International Inc., 1/28 Glossary MBL MICETEK BOOT LOADER MICETEK International Inc., 2/28 Table of Contents Introduction... 5 Memory Map... 6 Flash Memory Map... 6 DRAM Memory
More informationConnectCore 6 U-Boot Customizations. Reference Manual
ConnectCore 6 U-Boot Customizations Reference Manual Revision history 90001422 Revision Date Description A August, 2014 Initial release B October, 2014 Added SBCv2 support; added carrier board version
More informationADS U-boot User's Manual. Applied Data Systems Old Columbia Road Columbia MD, USA
ADS U-boot User's Manual ADS document # 110010-40011 Applied Data Systems www.applieddata.net 10260 Old Columbia Road Columbia MD, 21046 USA 301-490-4007 c2005 ADS August 11, 2005 ADS U-boot Bootloader
More informationSparkGate7 Quick startup guide
SparkGate7 Quick startup guide Thank you for buying a SparkGate and SPARK-501 SOM. More information on both can be found at www.shiratech.com. The Shiratech team. In the box: The evaluation kit you have
More informationGM8126 U-BOOT. User Guide Rev.: 0.2 Issue Date: May 2011
GM8126 U-BOOT User Guide Rev.: 0.2 Issue Date: May 2011 REVISION HISTORY Date Rev. From To Apr. 2011 0.1 - Original May 2011 0.2 - Modified Chapters 5 and 8 Added Chapter 7 Copyright 2011 Grain Media,
More informationLinux. For BCT RE2G2. User Guide. Document Reference: BCTRE2G2 Linux User Guide. Document Issue: Associated SDK release: 1.
Linux For BCT RE2G2 User Guide Document Reference: BCTRE2G2 Linux User Guide Document Issue: 1.05 Associated SDK release: 1.04 Author: D Robinson Contents Introduction... 3 Environment Setup... 3 Required
More informationGM8126 LINUX. User Guide Rev.: 0.1 Issue Date: January 2011
GM8126 LINUX User Guide Rev.: 0.1 Issue Date: January 2011 REVISION HISTORY Date Rev. From To Jan. 2011 0.1 - Original Copyright 2011 Grain Media, Inc. All Rights Reserved. Printed in Taiwan 2011 Grain
More informationCyclone V SoC PCI-Express Root Port Example Design. Application Note
Cyclone V SoC PCI-Express Root Port Example Design Application Note 7/1/2013 Table of Contents 1 Revision History... 4 2 Overview... 5 2.1 GSRD... 5 3 Hardware and Software Packages... 6 3.1 GSRD... 6
More informationUEIPAC VxWorks User Manual
27 Renmar Av. Walpole, MA 02081 Web site: www.ueidaq.com E-mail: info@ueidaq.com UEIPAC VxWorks User Manual January 2018 Edition Copyright 2018 United Electronic Industries, Inc. All rights reserved No
More informationGESBC-9260S User s Manual. Embedded Single Board Computer
GESBC-9260S User s Manual Embedded Single Board Computer Table of Contents Chapter 1 Introducing the GESBC-9260S Single Board Computer... 4 GESBC-9260S Overview... 4 Advanced Features... 4 AT91SAM9260...
More informationSAM9-L9261 User Manual. All boards produced by Olimex are ROHS compliant. Rev.C, September 2009 Copyright(c) 2009, OLIMEX Ltd, All rights reserved
SAM9-L9261 User Manual All boards produced by Olimex are ROHS compliant Rev.C, September 2009 Copyright(c) 2009, OLIMEX Ltd, All rights reserved INTRODUCTION: FEATURES: SAM9-L9261 is a development platform
More informationREX-RED Community Android 4.3
REX-RED Community Android 4.3 Build Guide REXNOS CO.,Ltd Document Information Version 1.1 File Name REX5260 Android 4.3 Build Guide.doc Date May 20, 2014 Status Working Revision History Date Version Update
More informationIndex. Ultimate Solutions, Inc Clever Drive Tewksbury, MA USA ZY1000
Quick Start Guide ZY1000 JTAG Debugger Version 2.00 March 1, 2012 ZY1000 Index 1 ZY1000...2 1.1 Warranty...2 1.2 Compliance...2 2 Basic ZY1000 setup...3 2.1 Set TCP/IP address...3 2.2 Connect the ZY1000
More information1. Developement Environment Building
1. Developement Environment Building 1 Download Contiki Source Code (under Linux): Firstly, clone the Contiki repository: git clone https://github.com/contiki-os/contiki.git Secondly, use the following
More informationRakunLS1, Qseven SBC module with LS1021A
RakunLS1, Qseven SBC module with LS1021A Software user manual $HeadURL: https://svn.borea.si/svn/docs/rakun/docs/rakunls1_sw_um.fodt $ $Rev: 932 $ $Date: 2015-10-15 16:02:53 +0200 (čet, 15 okt 2015) $
More informationFIAMMA MCAM335x Linux User's Guide
FIAMMA MCAM335x Linux User's Guide Pag. 1 of 20 FIAMMA MCAM335x Linux User's Guide Rev.1.1 All Rights Reserved. No part of this document may be photocopied, reproduced, stored in a retrieval system, or
More informationCOMX-P4080. Release Notes L69C February 2011
COMX-P4080 Release Notes 6806800L69C February 2011 Copyright Copyright 2011 Emerson Network Power All rights reserved. Emerson Network Power is registered in the U.S. Patent and Trademark Offices. All
More informationIntel Stratix 10 SoC FPGA Boot User Guide
Intel Stratix 10 SoC FPGA Boot User Guide Updated for Intel Quartus Prime Design Suite: 18.0 Subscribe Send Feedback Latest document on the web: PDF HTML Contents Contents... 3 Glossary... 3 Prerequisites...
More informationDEVELOPMENT GUIDE VAB-630. Linux BSP v
DEVELOPMENT GUIDE VAB-630 Linux BSP v1.0.1 100-09182017-114400 Copyright Copyright 2017 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
More informationZephyr Kernel Installation & Setup Manual
Zephyr Kernel Installation & Setup Manual Zephyr kernel is a small footprint Single address space OS, i.e, it combines application specific code with a custom kernel to create a monolithic image that gets
More informationDownloaded from: justpaste.it/o09s
Downloaded from: justpaste.it/o09s Pogoplug:~$ cat /proc/cpuinfo Processor : ARM926EJ-S rev 1 (v5l) BogoMIPS : 1192.75 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE
More informationGIGABYTE. Software Reference Guide for MP30 (APM) Platform R01. Document Version:
GIGABYTE Software Reference Guide for MP30 (APM) Platform R01 Document Version: R01 1 CONTENTS BASICS SECTION... 3 1.1 Equipment and tools list... 3 1.2 How to make Ubuntu OS image to SD card... 5 1.3
More informationEvaluation Board User Guide UG-604
One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com FEATURES Advantiv EVAL-ADV8003-SMZ-P Video Evaluation Board Inputs: 1 HDMI (non-hdcp),
More informationRenesas Koelsch Hardware Setup and Software Installation
Renesas Koelsch Hardware Setup and Software Installation Table of content Introduction Master GDP-ivi10 GDP-ivi9 GDP-ivi7 Software setup Pre-built binaries Quick Start Obtain and Install Renesas Graphics
More informationGetting Started with TargetOS on the ZedBoard 1 Introduction
Getting Started with TargetOS on the ZedBoard 1 Introduction This document covers how to get started with Blunk Microsystems TargetOS embedded operating system on the ZedBoard. It covers the following
More information2 Initialize a git repository on your machine, add a README file, commit and push
BioHPC Git Training Demo Script First, ensure that git is installed on your machine, and you have configured an ssh key. See the main slides for instructions. To follow this demo script open a terminal
More informationNova series update F/W & Boot code from Boot Utility
Nova series update F/W & Boot code from Boot Utility Purpose: Update firmware/boot code from Boot Utility Product Affect: Nova 20S, Nova 20R, Nova 26S, Nova 26R, Nova 27S, Nova 29S, Nova 30S, Nova 30R,
More informationOverview. during this tutorial we will examine how touse git from the command line. finally we will explore a graphical visualisation of git activity
Overview slide 1 during this tutorial we will examine how touse git from the command line we will also browse some of the files in the linux kernel and gcc finally we will explore a graphical visualisation
More informationSAMA5D3x-CM Instruction to program images with PEEDI
SAMA5D3x-CM Instruction to program images with PEEDI 1) To begin programing with PEEDI you need to prepare some cables and install a terminal emulation software 1.1 First ensure that you have installed
More information3.3 WinCE System Installation
3.3 WinCE System Installation FriendlyARM English User Manual 214 Note: This section assumes that you have in front of the method in accordance with the USB driver installed and the development board is
More informationPronto PicOS 1.4 Installation Reference Guide
Pronto PicOS 1.4 Installation Reference Guide PICA8 Inc. Mar, 2012 Copyright (C) 2009, 2010, 2011, 2012 Pica8, Inc. All rights reserved. Pica8, Inc. makes no warranty of any kind with regard to this material,
More informationboot PROM 11.1 boot PROM
11.1 boot PROM boot PROM PROM programmable read-only memory, SUN 11.2 NVRAM NVRAM- Non-volatile random access memory, EEPROM(electronically erasable programmable read-only memory) boot PROM 11.3 PROM
More informationCHAPTER 7. Astlinux and Asterisk Installation on Embedded System
CHAPTER 7 Astlinux and Asterisk Installation on Embedded System Introduction 1. Asterisk can be installed on number of operating systems but keeping embedded system in mind the operating system chosen
More informationHow to download a new Linux O/S Image File
How to download a new Linux O/S Image File The DIL/NetPC DNP/9200 U-Boot boot loader offers a set of features for download a new Linux O/S image file to the flash memory. This document describes the download
More informationTQ2440 Development Platform Manual
TQ2440 Development Platform Manual 0 Directory Directory... 1 Chapter 1 Introduction... 7 11Appearance of TQ2440 development platform... 7 12Hardware resource of TQ2440... 7 13Software introduction of
More informationMars ZX3 Android manual. Antmicro
Mars ZX3 Android manual Antmicro Sep 27, 2017 Contents 1 Introduction 1 1.1 Acknowledgements..................................... 1 1.2 Version information..................................... 1 2 Compiling
More informationInstallation guide for Arcturus Networks Inc.'s uclinux release
Installation guide for Arcturus Networks Inc.'s uclinux release 1 Mount the ISO image or the CD to /mnt mount -o loop uclinux-dist-2008-feb-05-r0-release.iso /mnt 2 Install tool chains Go to the /mnt directory
More informationHP FlexFabric 12900E Switch Series
HP FlexFabric 12900E Switch Series Software Upgrade Guide Part number: 5998-8368 Document version: 6W100-20150930 Legal and notice information Copyright 2015 Hewlett-Packard Development Company, L.P. No
More informationGetting Started with BeagleBoard xm
Getting Started with BeagleBoard xm by Getting Started with BeagleBoard-xM 1. Beagleboard-xM BeagleBoard.org ก Texas Instruments DM3730 1 GHz ก ARM Cortex-A8 (DSP) (PowerVR) (RAM) 512 MB Serial Port, USB
More informationDEVELOPMENT GUIDE VAB-630. Android BSP v
DEVELOPMENT GUIDE VAB-630 Android BSP v1.0.3 1.00-08112017-153900 Copyright Copyright 2017 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
More informationUpgrading the MSA1000 for Enhanced Features
White Paper December 2002 Prepared by: Network Storage Solutions Hewlett Packard Company Contents Benefits of the MSA1000 Enhancements...1 Prerequisites...3 Environmental Monitoring Unit (EMU) issue:...3
More informationQuick Start Guide EX-9686U/A-L(A9) Copyright TOPSCCC Technology CO., LTD. All rights reserved
Quick Start Guide Copyright 2000 2014 TOPSCCC Technology CO., LTD. All rights reserved Release Notes Version Release Date Notes 1.0 June 2013 Initial release 2.0 October 2013 Correct some typo errors 3.1
More informationRaspberry Pi Network Boot
Raspberry Pi Network Boot @Phenomer October 22, 2014 1 Raspberry Pi SD initrd 2 /srv/pxe ( ) /srv/pxe /srv/pxe/tftp - TFTP /srv/pxe/tftp/pxelinux.cfg - /srv/pxe/repo - /srv/pxe/initrd - initrd % sudo mkdir
More informationThe following file is used for updating the boot loader: xboot.bin: XSTREAM development platform boot loader image
Firmware Upgrade Procedure This procedure is the only way to update the LCI-3 firmware. It requires a SanDisk USB SD Reader/Writer (or equivalent) and a 64MB SD memory card. Larger density cards (128MB
More informationTrack Three Building a Rich UI Based Dual Display Video Player with the Freescale i.mx53 using LinuxLink
Track Three Building a Rich UI Based Dual Display Video Player with the Freescale i.mx53 using LinuxLink Session 1 How to capture your initial Linux based product requirements and quickly build a custom
More informationRelease Notes of the QNX BSP for AMCC PPC440 EP/GR Evaluation Kit (EVK) Trunk#
Release Notes of the QNX 6.4.0 BSP for AMCC PPC440 EP/GR Evaluation Kit (EVK) Trunk# System requirements# Target system QNX Neutrino RTOS 6.4.0 Board version: AMCC PPC440 EP (Yosemite) and AMCC PPC440
More informationLinux FastBoot. Reducing Embedded Linux Boot Times. Embedded World Conference 2012
Linux FastBoot Reducing Embedded Linux Boot Times Embedded World Conference 2012 Michael Röder Future Electronics Deutschland GmbH Detlev Zundel DENX Software Engineering GmbH Agenda Optimization Basics
More informationQuick Start Guide SBC21/NSD21/EC 21 SBC21 / EC21 / NSD21. Quick Start Guide. Copyright IC Nexus Corporation. All rights reserved
SBC21 / EC21 / NSD21 Quick Start Guide Copyright 2000 2013 IC Nexus Corporation. All rights reserved Release Notes Version Release Date Notes 1.0 June 2013 Initial release 2.0 October 2013 Correct some
More informationIntel SoC FPGA Embedded Development Suite (SoC EDS) Release Notes
Intel SoC FPGA Embedded Development Suite (SoC EDS) Release Notes Updated for Intel Quartus Prime Design Suite: 18.1 Subscribe Latest document on the web: PDF HTML Contents Contents Intel SoC FPGA Embedded
More informationD120-S3G User s Guide
D120-S3G User s Guide GIGABYTE Technology Ltd. Network & Business Unit Table of Contents 1. How to connect console.page 3 to 5 2. Login into Web UI Page 6 to 11 3. GIGABYTE Management Console (IPMI web
More informationSiFive HiFive1 Getting Started Guide. c SiFive, Inc.
SiFive HiFive1 Getting Started Guide c SiFive, Inc. January 3, 2017 2 SiFive HiFive1 Getting Started Guide 1.0.2 SiFive HiFive1Getting Started Guide Copyright Notice Copyright c 2017, SiFive Inc. All rights
More informationTrack Two Building an Internet Radio with the TI Sitara AM3517 using LinuxLink
Track Two Building an Internet Radio with the TI Sitara AM3517 using LinuxLink Session 1 How to assemble and deploy an initial BSP and setup the development environment with the matching SDK Audio streaming
More information**Note that this must be run from a PC on the same network segment as the NetBotz device, and the NetBotz device MUST be connected to the network.
**Note that this must be run from a PC on the same network segment as the NetBotz device, and the NetBotz device MUST be connected to the network.** 1. Download the correct drivers for the USB to Serial
More informationThe code in src/wf_example illustrates the use of WFI or WFE calls that put the calling ARM core into clock gating mode to save power.
Introduction The code in src/wf_example illustrates the use of WFI or WFE calls that put the calling ARM core into clock gating mode to save power. This project makes use of the "Sparrow" baremetal/amp
More informationUser Guide. Pigeon Point Chassis Manager. Release June 20, 2018
User Guide Pigeon Point Chassis Manager Release 1.2.1 June 20, 2018 nvent Schroff GmbH hardware.management@nvent.com www.pigeonpoint.com schroff.nvent.com This document is furnished under license and may
More informationXinu on Intel Galileo User Manual
Xinu on Intel Galileo User Manual Table of Contents Page 1.0 Firmware Update for the Intel Galileo board 2 2.0 Console connection on the Intel Galileo 2 2.1 Background 2 2.2 Serial cable setup for the
More informationLinux. For BCT TM1 / HB5. User Guide. Document Reference: BCTTM1HB5 Linux User Guide. Document Issue: 1.2. Associated SDK release: 1.
Linux For BCT TM1 / HB5 User Guide Document Reference: BCTTM1HB5 Linux User Guide Document Issue: 1.2 Associated SDK release: 1.2 Author: D Robinson Contents 1. Introduction... 4 2. Environment Setup...
More informationSheevaPlug Development Kit Reference Design. Rev 1.2
SheevaPlug Development Kit Reference Design Rev 1.2 INTRODUCTION...4 SECTION 1 OVERVIEW...6 1.1 SHEEVAPLUG DESCRIPTION....6 Figure 1.1: SHEEVAPLUG Components and JTAG test card...6 Figure 1.2: SheevaPlug
More informationHaving Fun with Social Coding. Sean Handley. February 25, 2010
Having Fun with Social Coding February 25, 2010 What is Github? GitHub is to collaborative coding, what Facebook is to social networking 1 It serves as a web front-end to open source projects by allowing
More informationBV511 Hardware Guide ByVac ByVac Revision 1.0
BV511 Hardware Guide ByVac ByVac 2007 www.byvac.co.uk Revision 1.0 ByVac 1 Copyright in this work is vested in ByVac and the document is issued in confidence for the purpose only for which it is supplied.
More informationRevision Control. An Introduction Using Git 1/15
Revision Control An Introduction Using Git 1/15 Overview 1. What is revision control? 2. 30,000 foot view 3. Software - git and gitk 4. Setting up your own repository on onyx 2/15 What is version control?
More informationEM210 Linux User Manual
EM210 Linux User Manual V1.2 Date:2014-10-10 www.armdesigner.com EM210 Linux User Manual Index 1. Features...3 2. Hardware Introduction...3 2.1 Hardware interface...4 2.2 Set boot mode...4 3. Software
More informationRelease Notes for the QNX Neutrino BSP for Freescale P2020DS 1.0.0#
Release Notes for the QNX Neutrino 6.4.1 BSP for Freescale P2020DS 1.0.0# 1.System Requirements# Target Requirements 1. QNX Neutrino RTOS 6.4.1 2. Board version: P2020DS - Stingray 3. P2020 processor 4.
More informationGetting started with ORPSoC on the ATLYS board
Getting started with ORPSoC on the ATLYS board Anton Fosselius, Per Lenander June 1, 2012 1 Contents 1 Introduction 3 2 Hardware 3 3 Installing Software 3 3.1 Xilinx ISE...............................
More informationDesigning with ALTERA SoC Hardware
Designing with ALTERA SoC Hardware Course Description This course provides all theoretical and practical know-how to design ALTERA SoC devices under Quartus II software. The course combines 60% theory
More informationNote that FLIP is an Atmel program supplied by Crossware with Atmel s permission.
INTRODUCTION This manual will guide you through the first steps of getting the SE-8051ICD running with the Crossware 8051 Development Suite and the Atmel Flexible In-System Programming system (FLIP). The
More informationIntelliServer RAS 2000 TM PowerRack Windows NT Supplement
IntelliServer RAS 2000 TM PowerRack Windows NT Supplement 1060 Windward Parkway, Suite 100, Alpharetta, GA, 30005-3992 (USA) (800) 241-3946, Outside U.S./Canada: (770) 625-0000 FAX: (770) 625-0013 email:
More informationVersatile Express. Boot Monitor. Reference Manual. Copyright ARM. All rights reserved. ARM DUI 0465F (ID110612)
Versatile Express Boot Monitor Reference Manual Copyright 2009-2012 ARM. All rights reserved. ARM DUI 0465F () Versatile Express Boot Monitor Reference Manual Copyright 2009-2012 ARM. All rights reserved.
More informationREVISION HISTORY...3 USING DEVELOPMENT KIT ADVANTAGES...4 BLOCK DIAGRAM...5 KEY FEATURES...6
TABLE OF CONTENTS REVISION HISTORY...3 USING DEVELOPMENT KIT ADVANTAGES...4 BLOCK DIAGRAM...5 KEY FEATURES...6 GENERAL INFORMATION...6 INFORMATION ON POWER...7 CONFIGURATION AND INSTALLATION...8 GPIO BIT
More informationPengwyn Documentation
Pengwyn Documentation Release 1.0 Silica October 03, 2016 Contents 1 Introduction 3 1.1 Platforms................................................. 3 1.2 Hardware requirements.........................................
More informationMatrix 500 Quick Installation Guide
Overview Matrix 500 features four serial ports, 10/100 Mbps Ethernet, USB port and SD socket for flash disk expansion. The preinstall Linux OS and GNU tool chain make Matrix 500 ready for your application
More informationDOMAIN TECHNOLOGIES INC. Users Guide Version 2.0 SB-USB2. Emulator
INC. Users Guide Version 2.0 SB-USB2 Emulator Table of Contents 1 INTRODUCTION... 3 1.1 Features... 3 1.2 Package Contents... 4 1.3 Related Components... 4 2 INSTALLATION... 4 3 INTEGRATION WITH LSI LOGIC
More informationHeterogeneous multi-processing with Linux and the CMSIS-DSP library
Heterogeneous multi-processing with Linux and the CMSIS-DSP library DS-MDK Tutorial AN290, September 2016, V 1.1 Abstract This Application note shows how to use DS-MDK to debug a typical application running
More information