ChekLoad Users Guide. This guide will assist in configuring the Ingenico en-2500 Check Reader to operate with a merchant s terminal type.
|
|
- Benedict Welch
- 6 years ago
- Views:
Transcription
1 ChekLoad Users Guide This guide will assist in configuring the Ingenico en-2500 Check Reader to operate with a merchant s terminal type. Global etelecom, Inc. 11/6/2009
2 Configuration of the Ingenico en-2500 Check Reader Pre-Requisites: Application Check Load Software Installed Cable To connect en-2500 to a PC (AC00569 REV C) NOTE: The application is a DOS-Based program and the mouse will not function. Instructions: 1. Double-click on the CHEKLOAD executable in the folder that the software was unzipped into. Press any key to continue...
3 2. Using the cursor keys, select the desired configuration application. 3. Connect the cable to check reader and verify that the green light is lit. 4. Pass the Configuration Check through the reader and verify that the light is still lit green. 5. Press [D] to begin the download.
4 On-Line User s Guide Press [F9] to enter the User s guide and [Esc] to exit. ChekLoad is easy to use. ChekLoad has one basic purpose: to allow you to quickly and easily download configurations into Checkmate s check readers. It provides a simple, menued interface that shows you the descriptions of the configurations available for download. You select a configuration with the cursor keys. Then, a simple, single keystroke command will download the selected configuration into a check reader. See the section below for keystroke commands, command line options, and error message explanations. Keystroke Options Use these keys while ChekLoad is running to activate various functions: [Alt-D] Download selected configuration to the check reader repeatedly. [Alt-T] Activate terminal mode. Used to test you check reader or to see what a downloaded configuration outputs for a particular check. [Alt-V] Display programmer s comments for current configuration. [D] Download selected configuration to the check reader. [End] Move to bottom of screen, or bottom of list. [Enter] Display detailed description for current configuration. [Esc] Exit program and return to DOS. [F1] Display this Help screen. [F2] Add configurations to the maste list from a diskette placed in your drive A. [F3] Add configurations to the maste list from a diskette placed in your drive B. [F4] Create a backup copy of this program and all configurations in the master list to a diskette placed in your drive A. [F5] Create a backup copy of this program and all configurations in the master list to a diskette placed in your drive B. [F9] Display the on-line User Guide. [Home] Move to top of screen, or top of a list. [PgUp] Scroll screen up by one page. [PgDn] Scroll screen down by one page. Command Line Options These are all of the words that can be specified on the command line when you start the ChekLoad program. For example, to cause the ChekLoad to communicate with the check reader on port COM2 instead of the default COM1, use the following command to start ChekLoad: CHEKLOAD COM2
5 Note that the ChekLoad will remember the last set of command line options used, so that the options are only necessary the first time you want to change a setting. Here are the available command line options: COLOR COM1 COM2 COM3 COM4 DETECT LCD Mono Enable color display support (default). Select COM1 as the programming port (default). Select COM2 as the programming port. Select COM3 as the programming port. Select COM4 as the programming port. List all serial ports installed in the system. Enable LCD display support. Enable monochrome display support. Error Message Guide Application Download Complete! Download was successfully completed to the check reader. Application Download Aborted! User pressed [Esc] key during download. Backup Complete! Backup of files to the specified floppy has successfully completed. Error during system backup! An error occurred during the backup procedure. Check the floppy disk for bad sectors, and possibly reformat the floppy disk using the DOS FORMAT program. Error reading specified drive! Either the floppy disk door is open, the floppy is not formatted or a critical error occurred during the file copy function. There is no description for this application. The current file does not contain any description text lines. You may view the file for more information or hit [Alt-V] to see the file comments. Specified serial port is not available! The serial port specified in the configuration file or specified from a command line option does not exist. Check your system configuration and try again. There is no description for this application. Application files do not have to have descriptions. Descriptions are completely optional and are only for informational purposes. You may use the [Alt-V] comment viewer command to see the comments are descriptive enough to answer your questions.
6 Download SUCCESSFUL. indicates that the check reader was successfully downloaded with the selected configuration. Download complete, Connect Next Unit and press a key or Esc to quit. indicates that the check reader was successfully downloaded with the selected configuration. Downloading file indicates that the check reader is accepting configuration information. ERROR: Could not init comm port! This is one of the messages that is displayed while the check reader is being downloaded. The serial communications port you selected for ChekLoad to use may be broken or nonexistent. Please verify that you have the correct serial port selected and try the download again. The serial port that ChekLoad uses can be changed with a command line option. Please see instructions below. ERROR: Could not write config filename to EEPROM! indicates a communications error with the check reader. ERROR: No ACK from UNIT! This is one of the messages that is displayed while the check reader is being downloaded. Check the cable connection to the check reader and run the Host Port Configuration check through the check reader and try your download process again. ERROR: reading specific drive! The drive you attempted to read from is an invalid drive. Please make sure the drive is ready and try the operation again. Sending clear eeprom (except MC, AMP, & SN) cmd indicates that any prior configuration that the check reader may contain is being erased prior to downloading the new configuration. Sending end of config command. indicates that the check reader is saving the downloaded configuration in its non-volatile memory. This is the last step of the configuration process. Specified COM Port is invalid! indicates that the serial port that ChekLoad is trying to use is not functioning or not present.
7 Writing config filename to EEPROM... indicates that ChekLoad is logging the same name of the downloaded configuration in the check reader. Directory Tree of Install / Update Floppy Diskette A:\ CHEKLOAD APPS CL00060.cfg cinstall.bat chekload.exe Hypercom.cfg chekload.hlp Nurit.cfg chekload.ini Omni.cfg Talento.cfg ZON.cfg Directory Tree on Hard Drive :\ APPS CL00060.cfg chekload.exe Hypercom.cfg chekload.hlp iseries.cfg cinstall.bat Linkpoint.cfg chekload.ini Nurit.cfg chekload Omni.cfg Talento.cfg ZON.cfg
NEC Versa 500D/550D Windows 98 Upgrade Information
NEC Versa 500D/550D Windows 98 Upgrade Information Follow the instructions provided in this document to upgrade your NEC Versa 500D/550D system to Microsoft Windows 98. Please read these notes in their
More informationCDS 32 Version 2.xx File Utilities
CDS 32 Version 2.xx File Utilities c2004 Pristine Systems, Inc. CONTENTS Addendum, 7 Addendum, Marking Multiple Selections, 7 Audio File Manager, 3 A Move, 3 M N E Network Audio Manager, 4 Exit, 4 R F
More informationMLP (Multi-Link Programming) SOFTWARE
FOR REVISIONS 1.10 AND ABOVE Doc-6001005 Rev - 3380 USER'S GUIDE TO MLP (Multi-Link Programming) SOFTWARE CHATSWORTH, CALIFORNIA Multi-Link Programming software makes programming a chain of Sentex Infinity
More informationMPA FLASH PROGRAMMING
LBI-38982 Mobile Communications MPA FLASH PROGRAMMING Programming Instructions TABLE OF CONTENTS INTRODUCTION...3 INSTALLATION...3 PC REQUIREMENTS...3 MAKING BACKUPS...3 SYSTEM HOOK-UP...4 MPA Radio...4
More informationDPM-3332, DPM Software Manual
DPM-3332, DPM-3321 Software Manual 1. Introduction DPM-3332 and DPM-3321 can storage 3600 set of data in side the unit. The data can be download to PC through USB connection or Bluetooth* connection. The
More informationCS3000 MMI SW-Version 6.1 Control and Configuration Software for FlexPak3000 V , GV3000 V and Liqui-Flo. Instruction Manual
CS3000 MMI SW-Version 6.1 Control and Configuration Software for FlexPak3000 V2.0-4.3, GV3000 V2.0-6.0 and Liqui-Flo Instruction Manual Manual P/N: 899.05.84 Firmware P/N: 788.05.30 User Manual: 49 1307e
More informationHARD DISK INSTALLATION:
While RAMCHECK is a stand-alone unit, the product includes the Communications Programs that allow you to upgrade your RAMCHECK s flash EPROM from our Web site (www.innoventions.com). The PC programs software
More informationHARD DISK INSTALLATION:
7. PC INTERFACE SIMCHECK II OWNER S MANUAL 7. PC PROGRAMS While SIMCHECK II, or SIMCHECK II se, is a stand-alone unit, the product includes the Communications Programs that allow you to upgrade your SIMCHECK
More informationThe TPU-2000R unit comes enclosed in a metal case. Follow the instructions and diagrams in this section to install the TPU-2000R.
Installation The TPU-2000R unit comes enclosed in a metal case. Follow the instructions and diagrams in this section to install the TPU-2000R. Receipt of the TPU-2000R When you receive the TPU-2000R, examine
More informationPCM-3110/3111 PC/104 PCMCIA module
PCM-3110/3111 PC/104 PCMCIA module The PCM-3110 is a PCMCIA driver in the PC/104 form factor. The PCM-3111 is a second PCMCIA socket when used in conjunction with the PCM-3110. The PCM-3110 is always designated
More informationINSTALLING THE PS3 XBOX READY SOFTWARE:
INSTALLING THE PS3 XBOX READY SOFTWARE: 1. Insert the Installation CD to CD-ROM drive and execute Ready_Setup.exe NOTE: If it is the first time for the target USB disk using under this software, the software
More informationTime Matters. Time Matters v10 Endorsement Training Enhancements
Time Matters Time Matters v10 Endorsement Training Enhancements Enhancements Database Powered by SQL Backup functionality Time Matters Desktop Extensions Activity Power Views Merge Template Folders Enhanced
More informationNEC Versa 4200 Windows 98 Upgrade Information
NEC Versa 4200 Windows 98 Upgrade Information Follow the instructions provided in this document to upgrade your NEC Versa 4200 system to Microsoft Windows 98. Please read these notes in their entirety.
More informationData Management Multilanguage Software for the CLA-1 Luminometer Version 2.5. User Manual
Data Management Multilanguage Software for the CLA-1 Luminometer Version 2.5 User Manual Hitachi Chemical Diagnostics, Inc. Hitachi Europe, Ltd. Whitebrook Park Lower Cookham Road Maidenhead, Berkshire,
More informationSetup support for RAMCHECK. Extensive, context-sensitive On-Line Help and Tutorials. HARD DISK INSTALLATION:
RAMCHECK OWNER S MANUAL While RAMCHECK is a stand-alone unit, the product includes the RAMCHECK PC Communications programs that allow you to upgrade your RAMCHECK s flash EPROM from our Web site (www.innoventions.com).
More informationIntel System Event Log (SEL) Viewer Utility. User Guide SELViewer Version 10.0 /11.0 February 2012 Document number: G
Intel System Event Log (SEL) Viewer Utility User Guide SELViewer Version 10.0 /11.0 February 2012 Document number: G24422-003 Legal Statements INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH
More information1.6 Program Window -- Names and Colors Main Window-1
.6 Program Window -- Names and Colors.6. Main Window- .6. Main Window- .6.3 Sub Window default colors. Window ARROW Back ground Color View Window Back ground Color RED MULT INFO WHITE View BAND MODE BEAM
More informationRKAT Audit Trail Module RK-LINK TM Software For the Radio Key 600 Series
RKAT Audit Trail Module RK-LINK TM Software For the Radio Key 600 Series INSTALLATION & OPERATING GUIDE Rev. B P/N 3321515 www.securakeystore.com (800) 878-7829 sales@securakeystore.com COPYRIGHT 2001
More informationAllen-Bradley. User Manual. Offline Development System (ODS) AB Drives
Allen-Bradley Offline Development System (ODS) User Manual AB Drives Important User Information Because of the variety of uses for the products described in this publication, those responsible for the
More informationMultiple Tool Operating Software 3 Users Manual. Table of Contents. Table of Contents Multiple Tool Operating Software 3 USERS MANUAL...
Table of Contents Table of Contents... 1 Multiple Tool Operating Software 3 USERS MANUAL... 2 MINIMUM REQUIREMENTS... 2 SUGGESTED REQUIREMENTS... 2 INSTALLATION... 2 START UP... 3 DISPLAY DESCRIPTION...
More informationHow to Update NN3D to v2.07 (Combo Update) MFDBB
How to Update NN3D to v2.07 (Combo Update) MFDBB 1. NN3D v2.07 Update Introduction MFDBB The combo update for the MFDBB requires a USB Jump Drive (USB flash memory stick). Additionally, a USB KEYBOARD
More informationPAGEPAC PLUS CONTROLLER CONFIGURATION PROGRAMMING GUIDE (V )
PagePac by Issue 1 PAGEPAC PLUS CONTROLLER CONFIGURATION PROGRAMMING GUIDE (V-5335800) INTRODUCTION The PagePac Plus User Interface software package runs on a generic DOS-based IBM PC or compatible. It
More informationUsing Microsoft Word. Getting Started With Word. Exercise 1 Starting the Program
Using Microsoft Word Getting Started With Word Exercise 1 Starting the Program There are several ways to start a program in Microsoft Windows and they may include the following: Clicking an icon on the
More informationSupplementary Instructions for Windows NT 4.0. Contents
Personal Computer Supplementary Instructions for Windows NT 4.0 CF-71 Series This manual contains supplementary instructions regarding the use of the computer. It explains the cases where the operation
More informationApplication Manual For Programmable Controller RC-Talk (RC-207)
Application Manual For Programmable Controller RC-Talk (RC-207) Table of Contents Introduction... 1 Eight Steps To System Completion... 1 System Design... 1 Wiring... 1 Installing Rc-Talk... 2 Running
More informationDataFast D-101. Hand Held Duplication Unit User s Manual
DataFast D-101 Hand Held Duplication Unit User s Manual GREYSTONE PERIPHERALS INC., 150 Knowles Drive, Los Gatos, CA 95030 TEL: (408) 871-4000 FAX: (408) 871-4100 E-Mail: grystone@grystone.com Web Page:
More informationFService. Software for configuration and readout of Relay M-Bus centrals. User Manual
Software for configuration and readout of Relay M-Bus centrals User Manual Content 1 Configuring M-Bus masters with FSERVICE... 3 1.0 What is FSERVICE?... 3 1.1 Installation... 3 1.2 Usage... 4 1.3 Basic
More informationUpgrade Instructions. View Manager 96 v Software Upgrade. The system displays the following prompt:
WORLD LEADER IN ELECTRONIC SECURITY Upgrade Instructions View Manager 96 v. 5.0 1 Software Upgrade This software permits you to upgrade your VM96 version 3.x or 4.x system to the latest version of VM96
More informationWELDSEQ Plus. Operation / Installation Manual. Weld Sequence PLC Terminal Program. Computer Weld Technology, Inc.
Computer Weld Technology, Inc. 10702 Old Bammel N Houston Rd. Houston, TX 77086 Phone: (713) 462-2118 Fax: (713) 462-2503 Email: cwt@cweldtech.com WELDSEQ Plus Weld Sequence PLC Terminal Program Operation
More informationThe QuickCalc BASIC User Interface
The QuickCalc BASIC User Interface Running programs in the Windows Graphic User Interface (GUI) mode. The GUI mode is far superior to running in the CONSOLE mode. The most-used functions are on buttons,
More informationUser Guide for ID-e Tag List Feature
User Guide for ID-e Tag List Feature Version 2.0 Date: July 8th,2011 Tag function guide How to Tag create upload your Banned Customer list on the ID-e Reader General Description This Manual will explain
More informationGE Fanuc Automation. Programmable Control Products. PANELWARE MMI Application Manual for GE Fanuc Series 90 Protocol (SNP)
GE Fanuc Automation Programmable Control Products PANELWARE MMI Application Manual for GE Fanuc Series 90 Protocol (SNP) GFK - 0850A May 1995 Warnings, Cautions, and Notes as Used in this Publication GFL-002
More informationKORG DSS-1 UPGRADE 2009 NEW FEATURES LIST
KORG DSS-1 UPGRADE 2009 NEW FEATURES LIST Introduction 4 Additional feature list 4 DSS-MSRK additions (1987) 4 New features (2009) 4 Part 1 5 DSS-1 Upgrade Summary 5 Part 2 6 Working with the enhanced
More informationThe Everex Scheduler TM Program
~~IVERE The Everex Scheduler TM Program OWNER'S MANUAL AND REFERENCE GUIDE (VERSION 2.0) EVER for EXcellence MAN-00039-20 The Everex Scheduler Program OWNER'S MANUAL AND REFERENCE GUIDE (VERSION 2.0) EVEREX
More informationIntel System Event Log Viewer Utility
Intel System Event Log Viewer Utility User Guide Reference for using the Intel System Event Log Viewer Utility (SEL Viewer). Rev 1.02 December 2017 Intel Server Products and Solutions Document
More informationVP2000 Reference Guide Rev. 1.0 Mar COPYRIGHT Eurotech S.p.A. All Rights Reserved.
EmbeddedDNA An0063 VP2000 Reference Guide Rev. 1.0 Mar. 2006 COPYRIGHT 1994-2006 Eurotech S.p.A. All Rights Reserved. 2 An0063 Via J. Linussio 1 33020 AMARO (UD) ITALY Phone: +39 0433 485 411 Fax: +39
More informationN F Disk Array Controller (S-ATA) BIOS Update Procedure (BIOS Revision: ) Rev. 1,
N8103-78F Disk Array Controller (S-ATA) BIOS Update Procedure (BIOS Revision: 2.0.70.24) Rev. 1, 2004.8.12 IMPORTANT: NEC EXPRESSBUILDER CD-ROM (provided with the computer) is necessary for updating the
More informationTroubleshooting & Repair
Chapter Troubleshooting & Repair 6.1 Introduction This chapter provides the most common problem encountered with the M785 notebook computer and some troubleshooting means. Some of the common problems are:
More informationInstallation and Operating Instructions
This document contains designs and other information which are the property of Technisonic Industries Ltd. Except for rights expressly granted by contract to the Canadian Government, or to the United States
More informationPOWERSTATION. Shell Runtime Guide
POWERSTATION Shell Runtime Guide POWERSTATION Shell Runtime Guide CTC Parker Automation Phone:513-831-2340 50 W. TechneCenter Drive, Milford, Ohio 45150 Technical Support: 513-248-1714 A3-05904-100 Copyright
More informationMicrosoft Excel 2007
Learning computers is Show ezy Microsoft Excel 2007 301 Excel screen, toolbars, views, sheets, and uses for Excel 2005-8 Steve Slisar 2005-8 COPYRIGHT: The copyright for this publication is owned by Steve
More informationFSERVICE Software setup toolkit for M-Bus masters and dataloggers
FSERVICE Software setup toolkit for M-Bus masters and dataloggers Version 1.9 Inhaltsverzeichnis 1 Configuring M-Bus masters with FSERVICE...2 1.0 What is FSERVICE?...2 1.1 Installation...2 1.2 Usage...2
More informationMINIMAT TUTORIAL Joel Robbin June 92
MINIMAT TUTORIAL Joel Robbin June 92 The purpose of this tutorial is to give you a feeling for how MINIMAT interacts with the user and what it can do. The tutorial is not intended to be a definitive account
More informationRK-LINK TM Version 2.x Instructions
Quick Start Steps Requirements - Windows 95 or Windows NT 4.0 or later, 16MB RAM, 20-30MB Hard Disk, 486 or better processor, Serial COM Port capable of 19.2K Baud. RKAT Module must be installed at the
More informationAn introduction to Linux Part 4
An introduction to Linux Part 4 Open a terminal window (Ctrl-Alt-T) and follow along with these step-by-step instruction to learn some more about how to navigate in the Linux Environment. Open the terminal
More informationSYSdev Program Development Manual Version 4.3
SYSdev Program Development Manual Version 4.3 Systems Engineering Associates, Inc. 14989 West 69th Avenue Arvada, Colorado 80007 U.S.A. Telephone: (303) 421-0484 Fax: (303) 421-8108 www.sea-seg.com 02/2004
More information- 1 - Manual for INDIGO
- 1 - Manual for INDIGO Last Revision: December 2001 - 2-1 User Manual 1.1 Introduction Welcome to INDIGO. Much design and consideration has been put into its construction. It is designed for use in therapist-supported
More informationOpen the QpTools form (from the SWITCHBOARD "Utilities" menu):
Tutorial: Backing Up Essential Data Files QuickPermit data files for local installations are generally very small and may be regularly backed up in less that a minute -- time well spent to protect you
More informationE&MATE PC DOWNLOADER. Operation and Installation Manual. Subsidiary of Pittway Corp. 149 Eileen Way, Syosset, NY 11791
7700 E&MATE PC DOWNLOADER Operation and Installation Manual II Subsidiary of Pittway Corp. 149 Eileen Way, Syosset, NY 11791 Notice The material and instructions covered in this manual have been carefully
More informationOperating Instructions
33CS Comfort System Software CONTENTS Page GENERAL...1 OPERATION...1-11 Start-Up...1 Main Menu...2 CURSOR MOVEMENT AND FUNCTION SELECTION Initial Setup and Configuration...3 BASIC MODE EXPERT MODE MODEM
More informationUSER MANUAL S6000 / S7000 S8000 / S9000. Associated Research, Inc., West Laurel Drive Lake Forest, Illinois, U.S.A.
USER MANUAL TM S6000 / S7000 S8000 / S9000 Associated Research, Inc., 2005 13860 West Laurel Drive Lake Forest, Illinois, 60045-4546 U.S.A. Item 38086 Ver 1.04 Printed Nov 15, 2005 TABLE OF CONTENTS INSTALLATION
More informationT E C H N O L O G I E S. User Guide (HDUS4SNDXHS-A)
T E C H N O L O G I E S User Guide 1:4 HDD/SSD HS Duplicator Deluxe 1:4 Snap-In Duplicator (HD4SNDXHS-A) (HDUS4SNDXHS-A) www.addonics.com Technical Support If you need any assistance to get your unit functioning
More informationMenu Symbols. Menu Symbol. Key on Keyboard
Menu Symbols Menu Symbol Key on Keyboard Command/Apple Key (like Control on a PC) Also written as Cmd Option (like Alt on a PC) Shift Control (Control-click = Right-click) Tab Return Enter (on Number Pad)
More informationDOCUMENTATION CHANGE NOTICE
DOCUMENTATION CHANGE NOTICE Product/Manual: WORDPERFECT 5.1 WORKBOOK Manual(s) Dated: 12/90, 6/91 and 8/91 Machines: IBM PC and Compatibles This file documents all change made to the documentation since
More informationAutologue User s Manual System Commands. Table Of Contents
Autologue User s Manual System Commands Page i Table Of Contents 17. Introduction System Commands... 1 17.1 Accessing The System Commands Menu... 1 17.2 Restore Data Files... 2 17.2.1 Performing The Restore...
More informationfor Windows Copyrighted by Educational Programs and Software, Inc.
EPES Software Survey Master for Windows Copyrighted by Educational Programs and Software, Inc. 1999 This documentation may not be copied without written consent from EPES Software, Inc. 1 Table of Contents
More informationIntroduction to Personal Computing
Introduction to Personal Computing Academic Computing Services www.ku.edu/acs Abstract: This document explains the basics of the Microsoft Windows operating system. It is intended for users who are either
More informationIDEA. User s Guide. Part No IDE02 Issue 1-0, April 1995 Printed in U.S.A. (183)
IDEA User s Guide Part No. 17500IDE02 Issue 1-0, April 1995 Printed in U.S.A. (183) 4 FOREST PARKWAY, SHELTON, CONNECTICUT 06484 TEL: 203-926-5400 FAX: 203-929-0535 This manual has been developed by Nitsuko
More informationOJEU Database. If you have any particular questions, please don t hesitate to contact OJEU Reporter Ltd and we would be happy to help.
OJEU Database This tutorial s objective is to assist a subscriber setup and use the basic functions of the OJEU Program. Advanced tutorials are provided after a few weeks once the user is used to the basic
More informationCK4 INSTRUMENT AND CORRDATA CK SOFTWARE QUICKSTART GUIDE. CORRDATA CK Software for CK4 CORROSOMETER instrument, CORROSOMETER, and CORROTEMP Probes
CK4 INSTRUMENT AND CORRDATA CK SOFTWARE QUICKSTART GUIDE CORRDATA CK Software for CK4 CORROSOMETER instrument, CORROSOMETER, and CORROTEMP Probes ROHRBACK COSASCO SYSTEMS, INC. 11841 E. Smith Avenue Santa
More informationRight and Left Click. Basic Computer Skills Tutorial
Right and Left Click To use the mouse, usually you click the left button. However you can also right-click to display a hidden menu related to the object you are in when clicking. This menu can vary depending
More informationXnView Image Viewer. a ZOOMERS guide
XnView Image Viewer a ZOOMERS guide Introduction...2 Browser Mode... 5 Image View Mode...14 Printing... 22 Image Editing...26 Configuration... 34 Note that this guide is for XnView version 1.8. The current
More informationCAD-CARE TROUBLESHOOTING GUIDE
CAD-CARE TROUBLESHOOTING GUIDE CAD-Care is a stable and error free system. The biggest problem encountered with CAD-Care is when something stops CAD-Care during a system sort. Windows Screen Savers have
More informationToll Free: Tel: Fax:
Toll Free: 1-888-865-6888 Tel: 510-226-8368 Fax: 510-226-8968 Email: sales@rackmountmart.com LCD Drawer User Manual This manual, covering various aspects of the equipment such as installation, setup and
More informationE-bot PRO Firmware Upgrade Manual for v1.3.0
E-bot PRO Firmware Upgrade Manual for v1.3.0 This manual introduces Firmware upgrade and TTS date upgrade. The firmware upgrade is necessary. The TTS data upgrade is not necessary if the version of E-bot
More information4 The Strategy Builder
4 The Strategy Builder This chapter describes Strategy Builder operation and how to set up a PC-30 strategy. As described earlier in Chapter 1: Introduction, a PC-30 strategy consists of Algorithms you
More informationAllen-Bradley. User Manual. DeviceView Configurator (2707-DNC)
Allen-Bradley DeviceView Configurator (2707-DNC) User Manual Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety
More informationPanelViewt 1200 Transfer Utility User Manual
User Manual Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State
More informationKeystroke POS Installation Instructions NETePay & Ingenico isc250 RBA Includes Support for EMV-PinDebit
Keystroke POS Installation Instructions NETePay 5.07.30 & Ingenico isc250 RBA 21.02 Includes Support for EMV-PinDebit Hardware: Ingenico isc250 w/ RBA 21.02 or later, Windows 7 or above Keystroke Software:
More informationOrganizing Your Contacts
You can organize your Contact list using either the Cisco IP Phone Messenger service application on your Cisco Unified IP Phone or the User Options web pages on the web. However, some tasks are not available
More informationColumbus Instruments. CIV-101 Software Instruction Manual M
0199-302M (Rev. 06/24/03) instrument Service requests for this can be made by phone, fax, e-mail, or through our web site: www.colinst.com/service.htm Please include your S/N: CIV-101 Software Instruction
More informationHP OmniBook DiagTools. User s Guide
HP OmniBook DiagTools User s Guide Notice This manual and any examples contained herein are provided as is and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind
More informationSOFTWARE MANUAL Rev. 2.00
SOFTWARE MANUAL LOGOMAT s.r.l. Via V. Bellini n 6 40067 Rastignano - Bologna (Italia) Tel. (+39) 051 6260070 Fax (+39) 051 6260111 E-mail: support.opm@logomat.it www.logomat.it 2 Index System requirements...
More informationSoftware Manual. KuDA View
Software Manual KuDA View Software Manual KuDA View Copyright 1997 Kaman Instrumentation Corporation PART NO: 860117-002 1500 Garden of the Gods Road Rev. B1 Colorado Springs, CO 80907 Kaman Instrumentation
More informationSmartScan. Barcode Translator for QuickBooks USER S MANUAL
SmartScan Barcode Translator for QuickBooks USER S MANUAL Baus Systems 4727 44 th Ave. SW, Suite 202 Seattle, WA 98116 (206) 932-9986 Office (206) 923-0839 Fax E-mail: support@baus-systems.com 1 TABLE
More informationSubject: ASC/2M Ethernet Connection Using Comtrol DeviceMaster RTS
Reference: AN1064 Date: 6/22/05 GENERAL This application note describes a method and the required hardware components to implement an Ethernet type communications connection between an Aries Communication
More informationBIOS Setup Information
CHAPTER 4 BIOS Setup Information The ROBO-308 is equipped with the AMI BIOS stored in Flash ROM. This BIOS has a built-in Setup program that allows users to modify the basic system configuration easily.
More informationSIO2MicroSD. Written by Don Peruski Document updated 12/31/12
SIO2MicroSD Written by Don Peruski Document updated 12/31/12 Note: This guide assumes that you understand the implications of connecting 3 rd party devices to your Atari. If incorrectly done, damage could
More informationLBI Mobile Communications S825 FLASH PROGRAMMING. Programming Instructions
LBI-38991 Mobile Communications S825 FLASH PROGRAMMING Programming Instructions TABLE OF CONTENTS INTRODUCTION...3 INSTALLATION...3 REQUIREMENTS...3 MAKING BACKUPS...3 SYSTEM HOOK-UP...4 S825 Control Unit...4
More informationManual Software Firmware Loader V1.1
Manual Software Firmware Loader V1.1 (PC software for Microsoft Windows XP, VISTA, 7, 10) This manual describes the installation of the Firmware Loader PC software and as a support for starting up the
More informationCard Encoder. PC Software. User Manual Software OPW Fuel Management Systems Manual No. M Rev 2
Card Encoder PC Software User Manual Software 5.21 2002 OPW Fuel Management Systems Manual No. M51-01.05 Rev 2 OPW Fuel Management Systems - System and Replacement Parts Warranty Statement Effective September
More informationACT-HDC11FH/ ACT-HDC13FH 1 to 1(3) HDD Duplicator. User s Manual. Ver: 1.1 ACT
ACT-HDC11FH/ ACT-HDC13FH 1 to 1(3) HDD Duplicator User s Manual Ver: 1.1 Attention: It takes over 5 seconds to power on after shutdown otherwise the system may operate abnorrmally. ACT ACT-POWER COMPUTER
More informationMS6174 Data Adaptor (USB type) Software Manual
MS6174 Data Adaptor (USB type) Software Manual 1. Introduction The first part of this manual provides detail installation steps of USB driver. The second part shows usage of application software. Since
More informationModel GX-2001 Data Logging Software. User s Guide
Model GX-2001 Data Logging Software User s Guide Part Number: 71-0056RK Edition: First Released: 6/29/2001 Warranty RKI Instruments, Inc., warrants gas alarm equipment sold by us to be free from defects
More informationCreate MedicCoin Master Node Instruction Rev2
Create MedicCoin Master Node Instruction Rev2 1. Download MedicCoin wallet using below link https://mediccoin.com/mediccoin-window.zip 2. Unzip/extract MedicCoin-Window.zip to C:\coins\MedicCoin folder.
More informationBasic Windows 95 Skills
Building Mouse Skills Click press left mouse button once used to select options in menus or to move your cursor Double click press left mouse button twice without moving the mouse pointer used on icons
More informationQuick Start Guide for the GSP30B Scale SLP-V Lite Scale and PC Label Cataloging & Printing Program Serial #: This software program will work for Globe GSP30B Scales with serial number 100128507 and above.
More informationAMD RAID Installation Guide
AMD RAID Installation Guide 1. AMD BIOS RAID Installation Guide... 2 1.1 Introduction to RAID... 2 1.2 RAID Configurations Precautions... 4 1.3 Legacy RAID ROM Configuration (for AMD X370, B350, and A320
More informationI N S T A L L M E R L I N ON A U S E R S C O M P U T E R
System Administrator s How to... I N S T A L L M E R L I N ON A U S E R S C O M P U T E R Merlin can be installed on PCs and on servers for use on terminals. It can be accessed through a dedicated Merlin
More informationAMD RAID Installation Guide
AMD RAID Installation Guide 1. AMD BIOS RAID Installation Guide.. 2 1.1 Introduction to RAID.. 2 1.2 RAID Configurations Precautions 3 1.3 Installing Windows 7 / 7 64-bit / Vista TM / Vista TM 64-bit /
More information15. Check this point when you can t communicate
* CONTENTS * 1. The organization of link system 2. FindView Installation 3. The FindView Software Main Screen 4. Communication Port setup 5. Scope Window 6. Meter Window 7. Notes Window 8. Menus and Toolbar
More informationGoblin. HDD Image Maker. User Guide V 1.0
Goblin HDD Image Maker User Guide V 1.0 EN July, 2013 Content Index Chapter 1. Product Overview 1. Overview 3 2. Features 4 3. System Overview 5 A. Appearance 5 B. Package Content 5 C. Connecting HDD 6
More informationD-105 DataFast. IDE Hard Drive Software Duplicator User s Manual
D-105 DataFast IDE Hard Drive Software Duplicator User s Manual GREYSTONE PERIPHERALS INC., 130-A Knowles Drive, Los Gatos, CA 95030 TEL: (408) 866-4739 FAX: (408) 866-8328 E-Mail: grystone@grystone.com
More informationProduct Specification for CANbus to DeviceNet Transducer Gateway
XG CANbus to DeviceNet Transducer Gateway April, 00 Product Specification for CANbus to DeviceNet Transducer Gateway The XG CANbus to DeviceNet Temposonics Gateway gathers position information from as
More informationMicroComm DXI. Maintenance. Manual. February, Printed in Canada. Harding Instruments
Maintenance Manual February, 2002 Printed in Canada Harding Instruments Table of Contents Section 1 - Introduction... 1 The Family of DXI Manuals... 1 About This Manual... 1 The... 2 Elements of the System...
More informationIf you save your printer setup in AUTOLOAD.SON you don't have to bother with the printer setting each time you want to use 1. Load AUTOLOAD.SON.
Notator IMG printing and Mac/PC file transfers This document covers the following: Saving scores as graphic files File transfers (Mac-Atari ST, Windows-Atari ST) Converting IMG files into PNG or GIF Creating
More informationAMS COCKPIT USERS GUIDE. AMS Cockpit Version 1.1 USERS GUIDE
AMS COCKPIT USERS GUIDE Table of Contents AMS Cockpit Version 1.1 USERS GUIDE Revision Date: 1/15/2010 A d v a n c e d M i c r o S y s t e m s, I n c. w w w. s t e p c o n t r o l. c o m i Table of Contents
More informationlcd, Inc Rock Str eet Rockf MODEM. ( 815) CoPYtight r 1%,
- ---- 1220 Rock Str eet Rockf (815) _ 2 101-1437 MODEM. ( 815) 968-2229 lcd, Inc. CoPYtight r 1%, FlashBack! The Hard Disk and Multi I/O Backup Utility for SpartaDOS Users by led For further in formation
More informationGrandstream Networks, Inc. GXV3275 IP Multimedia Phone GUI Customization Guide
Grandstream Networks, Inc. GXV3275 IP Multimedia Phone GUI Customization Guide TABLE OF CONTENTS INTRODUCTION... 3 OVERVIEW... 3 HOW TO CUSTOMIZE GXV3275 LCD GUI... 3 CONFIGURATION GUIDE... 4 APP SETTING...
More informationWinSen Remote Site Control Module (RSCM)
Installation and Operations Manual WinSen Remote Site Control Module (RSCM) Sentinel Systems Corporation CREDITS Steve Barker Bruce Guthals Daniel Quinton Copyright 1996-2001 Sentinel Systems Corporation
More information