SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6.
|
|
- Hollie Blankenship
- 5 years ago
- Views:
Transcription
1 ET 200M 1 Gateway 2 SIMATIC rocess Control System CS 7 Catalog Overview ET 200S 3 ET 200iS 4 ET 200S 5 ET 200X 6 ET 200pro 7 Repeater 8 Network Components 9 C 10 C-based automation 11 CS 7 12 S S valid for CS 7 as of V8.0 S2 Appendix A 05/2014 A5E AA
2 Legal information arning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken. ARNING indicates that death or severe personal injury may result if proper precautions are not taken. CAUTION indicates that minor personal injury can result if proper precautions are not taken. NOTICE indicates that property damage can result if proper precautions are not taken. If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage. Qualified ersonnel The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when working with these products/systems. roper use of Siemens products Note the following: Trademarks ARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. roper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. All names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner. Disclaimer of Liability e have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions. Siemens AG Industry Sector ostfach NÜRNBERG GERMAN A5E AA 05/2014 Subject to change Copyright Siemens AG All rights reserved
3 Table of contents 1 ET 200M IM Accessories Gateway IE/B Link D link FF Link Link A coupler Optical link module Accessories ET 200S AI AO DI DO IM S Terminal module ET 200iS AI AI-F AO DI DI-F DO DO-F IM S EM atchdog...24 Catalog Overview, 05/2014, A5E AA 3
4 Table of contents 4.12 Couplers Terminal module ET 200S AI AO DI DO FM IM S Terminal module Motor starter F motor starter Motor starter accessories TM motor starter ET 200X AI AO BM_DI BM_DO DI DO S Valve ET 200pro AI AO DI DO F_DI F_DI/DO IM S Connection modules Catalog Overview, 05/2014, A5E AA
5 Table of contents 8 Repeater Repeater Network Components IE OSM - ESM XB X X X XR300 Modular X XR500 Modular S600 (Industrial Security Module) (LAN) C C Ethernet C ROFIBUS C ILAN Network adapter Graphics cards Signal modules rinters Chip card reader C-based automation Controller CS7 BOX CS7 AS RTX CS artner modules S C t C AS-i FM S SM DI SM DO...85 Catalog Overview, 05/2014, A5E AA 5
6 Table of contents 13.7 SM DI/DO SM DI-F SM DO-F SM AI SM AO SM AI-F SM MTA S C Ethernet C ROFIBUS FM CU prior to 04/99 (up to CS7 V4.02) CU as of 04/99 (CS7 V5.0 and later) H-CU as of 04/99 (CS7 V5.0 and later) CU as of 08/04 (CS7 V6.1 and later) H-CU as of 08/04 (CS7 V6.1 and later) CU as of 12/06 (CS7 V7.0 and later) H-CU as of 09/07 (CS7 V7.0.1 and later) CU as of 08/10 (CS7 V7.1.2 and later) H-CU as of 12/11 (CS7 V8.0 and later) CU as of 06/13 (as of CS 7 V8.0.2) IM S Racks SM DI SM DO SM AI SM AO A Appendix A.1 roperties Catalog Overview, 05/2014, A5E AA
7 ET 200M IM Approved combinations See the "SIMATIC Distributed I/O Device ET 200M" manual for the approved combinations of interface modules and bus modules and for the available functions. roduct name Article no. Firmware version Brief description roperties ET 200M- IM ET 200M- IM 153-1, extended environmental conditions ET 200M- IM ET 200M- IM 153-1, extended environmental conditions ET 200M- IM ET 200M- IM ET 200M- IM ET 200M- IM ET 200M- IM ES AA02-0XB0 6ES AA82-0XB0 6ES AA03-0XB0 6ES AA83-0XB0 6ES AA01-0XB0 6ES AA02-0XB0 6ES BA00-0XB0 V3.x 6ES BA01-0XB0 V4.x 6ES BA81-0XB0 V4.x Bus interface for S7-300 SMs, FM 350 to FM 352, FM 355, C 341, module replacement during operation Bus interface for S7-300 SMs, extended environmental conditions Bus interface for S7-300 SMs, FM 350 to FM 352, FM 355, C 341, module replacement during operation Bus interface for S7-300 SMs, extended environmental conditions Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation, extension of process control functions Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation, extension of process control functions Bus interface for S7-300 SMs, (outdoor), FMs (except FM 356-4), module replacement during operation, extension of process control functions X 08/ 00 X 10/ 05 X X 11/ 03 X 04/ 00 X 06/ 04 S X 07/ 06 S X 10/ 09 S X 12/ 10 Catalog Overview, 05/2014, A5E AA 7
8 ET 200M 1.2 Accessories roduct name Article no. Firmware version Brief description roperties ET 200M- IM ET 200M- IM ET 200M- IM FO ET 200M- IM FO ET 200M- IM N HF 6ES BA02-0XB0 V5.x 6ES BA82-0XB0 V5.x 6ES AB01-0XB0 6ES BB00-0XB0 V3.x 6ES BA00-0XB0 V4.x Bus interface for S7-300 SMs, FMs (except FM 356-4), module replacement during operation, extension of process control functions, up to 12 I/O modules can be operated Bus interface for S7-300 SMs, (outdoor), FMs (except FM 356-4), module replacement during operation, extension of process control functions, up to 12 I/O modules can be operated Bus interface for S7-300 SMs, with fiber optics, FMs (except FM 356-4), module replacement during operation Bus interface for S7-300 SMs, with fiber optics, FMs (except FM 356-4), module replacement during operation, extension of process control functions Bus interface for S7-300 SMs, with ROFINET connection; supports failsafe and HART module, N system redundancy S X S X X 01/ 03 S X 10/ Accessories Approved combinations See the "SIMATIC Distributed I/O Device ET 200M" manual for the approved combinations of interface modules and bus modules and for the available functions. artition 6ES KA00-0XA0 Ex partition for ET 200M Bus module 6ES HA00-0XA0 Active bus module for ET 200M IM 153; S/IM Bus module 6ES HB00-0XA0 Active bus module for ET 200M IM 153; 2x 40 mm Bus module 6ES HC00-0XA0 Active bus module for ET 200M IM 153; 1x 80 mm BM IM/IM 6ES HD00-0XA0 Active bus module for ET 200M IM 153; IM/IM for redundant IM operation BM IM/IM 6ES HD10-0XA0 Active bus module for ET 200M IM 153; IM/IM for redundant IM operation 07/ 04 8 Catalog Overview, 05/2014, A5E AA
9 ET 200M 1.2 Accessories F separator bus module 6ES HG00-0XA0 F separator bus module for ET 200M F separator module 6ES KF00-0XA0 F separator module for ET 200M Catalog Overview, 05/2014, A5E AA 9
10
11 Gateway IE/B Link Approved combinations See SIMATIC Net; S7-Cs for Industrial Ethernet; Manual, art BL1 for the approved combinations of interface modules, couplers and bus modules as well as for the available functions. IE/B Link N IO 6GK AB00 IE/B link ROFINET IO proxy including real-time; gateway between Industrial Ethernet and rofibus; S7 routing; data record gateway; S7 slaves; DV1 slaves; 10/100 Mbps Fast Ethernet; 9.6 Kbps to 12 Mbps ROFIBUS 2.2 D link Approved combinations See SIMATIC Bus links D/A coupler, active field distributor, D/A Link and Link documentation for the approved combinations of interface modules, couplers and bus modules and for the available functions. roduct name Article no. Firmware version Brief description IM 157 6ES AA80-0XA0 Interface module for ROFIBUS A; extended temperature range C IM 157 6ES AA81-0XA0 Interface module for ROFIBUS A; extended temperature range C IM 157 6ES AA82-0XA0 V4.x Interface module for A Link, D V1 to D and A; module replacement during operation, information function, F update via bus, extension of process control functions roperties X 06/ 00 X 12/ 03 S 06/ 06 Catalog Overview, 05/2014, A5E AA 11
12 Gateway 2.3 FF Link roduct name Article no. Firmware version Brief description roperties IM HF IM Outdoor IM HF IM HF Outdoor 6ES BA01-0XB0 V4.x 6ES BA81-0XB0 V4.x 6ES BA02-0XB0 V5.x 6ES BA82-0XB0 V5.x A Link, D V1 to D and A; module replacement during operation, information function, F update via bus, extension of process control functions A Link, outdoor, D V1 to D and A; module replacement during operation, information function, F update via bus, extension of process control functions A Link, D V1 to D and A; module replacement during operation, information function, F update via bus, extension of process control functions up to 12 I/O modules can be operated A Link, outdoor, D V1 to D and A; module replacement during operation, information function, F update via bus, extension of process control functions up to 12 I/O modules can be operated S 10/ 09 S 10/ 07 S S 2.3 FF Link Approved combinations See SIMATIC Bus links FF Link bus link documentation for the approved combinations of interface modules, couplers and bus modules and for the available functions. roduct name Article no. Firmware version Brief description IM FF Outdoor 6ES DA80-0XB0 Interface module for SIMATIC FF Link, capable of redundant operation; FOUNDATION Fieldbus Link Master, extended temperature range FDC 157 6ES AC84-0XA0 Interface module for SIMATIC FF Link; physical interface for FOUNDATION Fieldbus H1, capable of redundant operation, with integrated bus supply up to 1 A; integrated diagnostics roperties S 12 Catalog Overview, 05/2014, A5E AA
13 Gateway 2.5 A coupler 2.4 Link Approved combinations See SIMATIC Bus links D/A coupler, active field distributor, D/A Link and Link documentation for the approved combinations of interface modules, couplers and bus modules and for the available functions. coupler 6ES K00-0AB0 coupler; star connection for connection of singlechannel I/O to H system; single interface module coupler 6ES LB00-0XA0 coupler; star connection for connection of single-channel I/O to H system; single interface module with integrated RS 485 repeater 10/ A coupler Approved combinations See SIMATIC Bus links D/A coupler, active field distributor, D/A-Link and -Link documentation for the approved combinations of interface modules, couplers and bus modules and for the available functions. D/A coupler 6ES AC00-0XA0 D/A coupler 04/ 00 D/A coupler 6ES AC80-0XA0 D/A coupler, non-ex; (outdoor); 400 ma D/A coupler 6ES AC81-0XA0 D/A coupler, non-ex; (outdoor); 400 ma D/A coupler 6ES AC82-0XA0 D/A coupler, non-ex; (outdoor); 1000 ma, 31 V D/A coupler 6ES AC83-0XA0 D/A coupler, non-ex; (outdoor); for redundant operation D/A coupler 6ES AD00-0XA0 D/A coupler, ex(i) 07/ 01 D/A coupler 6ES AD80-0XA0 D/A coupler, ex(ib); extended environmental conditions A 05/ 04 04/ 05 07/ 07 12/ 03 Catalog Overview, 05/2014, A5E AA 13
14 Gateway 2.6 Optical link module D/A coupler, ex 6ES AD81-0XA0 D/A coupler; extended environmental conditions (ia), FM certification D/A coupler, ex 6ES AD82-0XA0 D/A coupler; extended environmental conditions (ia), FM certification, dust type certification Active field distributor 6ES AG81-0XA0 Active field distributor AFD for ROFIBUS A; ring redundancy; 4 spur lines Active field distributor 6ES AG82-0XA0 Active field distributor AFD for ROFIBUS A; ring redundancy; 8 spur lines 05/ Optical link module Approved combinations See the "SIMATIC Bus links D/A Link and Link" manual for the approved combinations of interface modules, couplers and bus modules and for the available functions. roduct name Article no. Firmware version Brief description roperties ROFIBUS OLM 11 ROFIBUS OLM 12 ROFIBUS OLM G11 ROFIBUS OLM G12 6GK CA00 V4.x 6GK CA00 V4.x 6GK CB00 V4.x 6GK CB00 V4.x Optical Link Module; 1 RS fiber-optic interface (2 BFOC - OF/CF); signaling contact and measuring output, including 2 BFOC connectors Optical Link Module; 1 RS fiber-optic interface (4 BFOC - OF/CF); signaling contact and measuring output, including 4 BFOC connectors Optical Link Module; 1 RS fiber-optic interface (2 BFOC - multimode fiber-optic cable); signaling contact and measuring output Optical Link Module; 1 RS fiber-optic interface (2 BFOC - multimode fiber-optic cable); signaling contact and measuring output 14 Catalog Overview, 05/2014, A5E AA
15 Gateway 2.7 Accessories roduct name Article no. Firmware version Brief description roperties ROFIBUS OLM G12-EEC ROFIBUS OLM G ROFIBUS OLM G ROFIBUS OLM G22 6GK CD00 V4.x 6GK CC00 V4.x 6GK CC00 V4.x 6GK CB00 V4.x Optical Link Module; 1 RS fiber-optic interface (4 BFOC - multimode fiber-optic cable); signaling contact and measuring output, extended temperature range C Optical Link Module; 1 RS fiber-optic interface (2 BFOC - single-mode fiberoptic cable) wavelength 1300 nm for long distances, signaling contact and measuring output Optical Link Module; 1 RS fiber-optic interface (4 BFOC - single-mode fiberoptic cable) wavelength 1300 nm for long distances, signaling contact and measuring output Optical Link Module; 2 RS fiber-optic interface (2 BFOC) signaling contact and measuring output 2.7 Accessories Approved combinations See the corresponding manuals for the approved combinations of interface modules and bus modules and for the available functions. BM S/IM SILUS extreme 6AG HA00-2XA0 BM S/IM 6ES HA00-0XA0 Bus module for IM 153 Bus module for IM High Feature / IM FF Active bus module for 1 load power supply and 1 module; for "hot swap in runtime" function, extended temperature range -25 to +70 C Active bus module for 1 power supply and 1 module BM IM/IM 6ES HD80-0XA0 Bus module for IM 157 / IM High Feature / IM FF Active bus module for 2 modules; for redundant and non-redundant configuration; "hot swap in runtime" function, extended temperature range -25 to +60 C Catalog Overview, 05/2014, A5E AA 15
16 Gateway 2.7 Accessories BM IM/IM 6ES HD10-0XA0 Bus module for IM BM 6ES HE80-0XA0 Bus module for IM 157 Bus module for redundant IM mode; "hot swap in runtime" function Bus module for redundant configuration of the IM 157 and module hot swap in runtime; temperature range -25 to +60 C BM FDC 6ES HF80-0XA0 Bus module for 1 D/A coupler Ex(i) / FDC / 1 field device coupler Active bus module for "hot swap in runtime" function, extended temperature range -25 to +60 C BM FDC/FDC 6ES HG80-0XA0 Bus module for 2 D/A couplers / 2 field device couplers Active bus module for redundant configuration; for "hot swap in runtime" function, extended temperature range -25 to +60 C BM 6ES H00-0XA0 Bus module for coupler Active field distributor AFD Active field distributor AFS Active field distributor AFS Active field distributor AFD4 Active field distributor AFD8 Active field distributor AFDiS 6ES AF81-0XA0 6ES AF82-0XA0 6ES AG80-0XA0 6ES AG81-0XA0 6ES AG82-0XA0 6ES AG83-0XA0 Active field distributor AFD for A or FF field devices; ring redundancy; 4 short-circuit proof spur line connections Active field distributor AFS for A or FF; coupler redundancy Active field distributor AFS for ROFIBUS A and FOUNDATION Fieldbus H1; coupler redundancy Active field distributor AFD4 for ROFIBUS A and FOUNDATION Fieldbus H1; ring redundancy; 4 short-circuit proof spur line connections Active field distributor AFD8 for ROFIBUS A and FOUNDATION Fieldbus H1; ring redundancy; 8 short-circuit proof spur line connections Active field distributor AFDiS for A or FF field devices; ring redundancy; 6 short-circuit proof and intrinsically safe spur line connections 08/ 12 08/ Catalog Overview, 05/2014, A5E AA
17 ET 200S AI 2 AI 2 IRE 6ES RB00-0AB0 Analog input module 2 AI I; 2-wire measuring transducer; ma / 12 bits + sign, ma / 12 bits 2 AI 4 IRE 6ES RB50-0AB0 Analog input module 2 AI I; 4-wire measuring transducer; ma / 12 bits, ma / 12 bits 2 AI TC 6ES SB00-0AB0 Analog input module 2 AI TC; 15 bits + sign; standard; thermocouples: E, N, J, K, L, S, R, B, T,U 2 AI RTD 6ES SB50-0AB0 Analog input module 2 AI RTD; 15 bits + sign; standard; R: 600 Ohm; RTD: t 100, Ni 100: 2 AI 2 IRE HART 6ES TB00-0AB0 Analog input module 2 AI; ma, with HART communication for connecting 2-wire measuring transducers 2 AI 4 IRE HART 6ES TB50-0AB0 Analog input module 2 AI; ma, with HART communication for connecting 4-wire measuring transducers 3.2 AO 2 AO 0/4-20mA 6ES RB00-0AB0 Analog output module 2 AO; ma / 12 bits + sign; ma / 12 bits 2 AO HART 6ES TB00-0AB0 Analog output module 2 AO; ma; with HART communication Catalog Overview, 05/2014, A5E AA 17
18 ET 200S 3.6 S 3.3 DI 4 DI NAMUR 6ES RD00-0AB0 Digital input module 4 DI NAMUR 3.4 DO 2 DO 6ES SB00-0AB0 2 DO; DC 25 V / 25 ma 3.5 IM ET 200iS-IM ES AA00-0AB0 Interface module for ET 200iS electronic modules for intrinsically safe ROFIBUS D X 3.6 S S 6ES EA00-0AA0 ower supply for ET 200iS 18 Catalog Overview, 05/2014, A5E AA
19 ET 200S 3.7 Terminal module 3.7 Terminal module TM-E30S-44iS 6ES CB00-0AA0 Terminal module for Ems; 4 rows; screw terminal TM-E30C-44iS 6ES CB10-0AA0 Terminal module for EMs; 4 rows; spring-loaded terminal TM-S-iS 6ES DA00-0AA0 Terminal module for S TM-IM-iS 6ES DB00-0AA0 Terminal module for IM Catalog Overview, 05/2014, A5E AA 19
20
21 ET 200iS AI 4 AI I 2IRE HART 6ES TD00-0AB0 Analog input module 4 AI; ma; with HART communication for connecting 2-wire measuring transducers 4 AI I 4IRE HART 6ES TD50-0AB0 Analog input module 4 AI; ma; with HART communication for connecting 4-wire measuring transducers 4 AI TC 6ES SD00-0AB0 Analog input module 4 AI TC 4 AI RTD 6ES SD50-0AB0 Analog input module 4 AI RTD 4 AI RTD 6ES SD51-0AB0 Analog input module 4 AI RTD M M M M 05/ 08 M 4.2 AI-F 4 AI 2IRE HART 6ES FA00-0AB0 Analog input module 4 AI; 0/ ma; safety-related, ex i;with HART communication for connecting 2-wire measuring transducers M 4.3 AO 4 AO I HART 6ES TD00-0AB0 Analog output module 4 AO; ma; with HART communication M Catalog Overview, 05/2014, A5E AA 21
22 ET 200iS 4.6 DO 4.4 DI 8 DI NAMUR 6ES RF00-0AB0 Digital input module 8 DI NAMUR M 4.5 DI-F 8 DI NAMUR 6ES FN00-0AB0 Digital input module F-DI 8 NAMUR, safety-related, ex i M 4.6 DO 4 DO DC23,1V/20mA 6ES RD00-0AB0 4 DO; DC 23.1 V / 20 ma 4 DO DC23,1V/20mA Shutdown "H" 6ES RD01-0AB0 4 DO; DC 23.1 V / 20 ma; shutdown "H" 4 DO DC17,4V/27mA 6ES RD10-0AB0 4 DO; DC 17.4 V / 27 ma 4 DO DC17,4V/27mA Shutdown "H" 6ES RD11-0AB0 4 DO; DC 17.4 V / 27 ma; shutdown "H" 4 DO DC17,4V/40mA 6ES RD20-0AB0 4 DO; DC 17.4 V / 40 ma 4 DO DC17,4V/40mA Shutdown "H"" 4 DO DC17,4V/40mA Shutdown "H" 4 DO DC23,1V/20mA Shutdown "L" 6ES RD21-0AB0 6ES RD22-0AB0 6ES GD00-0AB0 4 DO; DC 17.4 V / 40 ma; shutdown "H" 4 DO; DC 17.4 V / 40 ma; shutdown "H" 4 DO; DC 23.1 V / 20 ma; shutdown "L" M 10/ 06 M M 10/ 06 M M 10/ 06 M 06/ 10 M M 22 Catalog Overview, 05/2014, A5E AA
23 ET 200iS 4.8 IM 4 DO DC17,4V/ 27mAShutdown "L" 4 DO DC17,4V/40mA Shutdown "L" 4 DO DC17,4V/ 40mAShutdown "L" 4 DO DC25,5V/22mA Shutdown "L" 2 DO Relais UC60V/ 2A 6ES GD10-0AB0 6ES GD20-0AB0 6ES GD21-0AB0 6ES GD30-0AB0 6ES HB00-0AB0 4 DO; DC 17.4 V / 27 ma; shutdown "L" 4 DO; DC 17.4 V / 40 ma; shutdown "L" 4 DO; DC 17.4 V / 40 ma; shutdown "L" 4 DO; DC 25.5 V / 22 ma; shutdown "L" 2 DO relay; UC 60 V / 2 A M M 06/ 10 M M M 4.7 DO-F 4 DO 6ES FD00-0AB0 4 DO; DC 17.4 V / 40 ma; -switching, safety-related, ex i M 4.8 IM roduct name Article no. Firmware version Brief description ET 200iS-IM ES AA00-0AB0 Interface module for ET 200iS electronic modules for intrinsically safe ROFIBUS D ET 200iS-IM ES AA00-0AB0 V2.0 Interface module for ET 200iS electronic modules for intrinsically safe ROFIBUS D can be used for redundant operation in the H system roperties S S Catalog Overview, 05/2014, A5E AA 23
24 ET 200iS 4.12 Couplers 4.9 S S DC 24V 6ES EA00-0AA0 ower supply for ET 200iS 07/ 06 S DC 24V 6ES EA01-0AA0 ower supply for ET 200iS S AC 120/230V 6ES EC00-0AA0 ower supply for ET 200iS 4.10 EM EM reserve module 6ES AA00-0AA0 Reserve module for free slots 4.11 atchdog atchdog module 6ES BB00-0AB0 Special module for station monitoring M 4.12 Couplers RS 485-IS coupler 6ES AC80-0XA0 Fieldbus coupler between ROFIBUS D and RS 485-IS; to control intrinsically safe ROFIBUS nodes; installation in Zone 2 possible; extended temperature range 24 Catalog Overview, 05/2014, A5E AA
25 ET 200iS 4.13 Terminal module 4.13 Terminal module TM-EM/EM 60 S 6ES CA00-0AA0 Terminal module for 2 EM; screw terminal TM-EM/EM 60 C 6ES CA10-0AA0 Terminal module for 2 EM; spring-loaded terminal TM-EM/EM 60 S 6ES CA20-0AA0 Terminal module for 2 EM; screw terminal TM-EM Relais C 6ES CB00-0AA0 Terminal module for EM relay; screw terminal TM-IM/EM 60 S 6ES AA00-0AA0 Terminal module for IM / EM; screw terminal TM-IM/EM 60 C 6ES AA10-0AA0 Terminal module for IM / EM; spring-loaded terminal TM-IM/EM 60 S 6ES AA20-0AA0 Terminal module for IM / EM; screw terminal TM-IM/IM 6ES AB00-0AA0 Terminal module for redundant IM TM-S-A 6ES DA00-0AA0 Terminal module for power supply 07/ 06 TM-S-B 6ES DB00-0AA0 Terminal module for redundant power supply TM-S-A 6ES DA10-0AA0 Terminal module for 24 V DC power supply TM-S-B 6ES DB10-0AA0 Terminal module for 24 V DC redundant power supply TM-S-A 6ES DA20-0AA0 Terminal module for 120/230 V AC power supply TM-S-B 6ES DB20-0AA0 Terminal module for 120/230 V AC redundant power supply 07/ 06 Catalog Overview, 05/2014, A5E AA 25
26
27 ET 200S AI 2 AI U 6ES FB00-0AB0 Analog input module 2 AI; (+/-5 V, V, +/-10 V) / 13 bits; standard 2 AI U 6ES FB01-0AB0 Analog input module 2 AI; (+/-5 V, V, +/-10 V) / 13 bits; standard 2 AI I 2DMU 6ES GB00-0AB0 Analog input module 2 AI; 2-wire measuring transducer ( ma) / 13 bits; standard 2 AI I 2DMU 6ES GB01-0AB0 Analog input module 2 AI; 2-wire measuring transducer ( ma) / 13 bits; standard 2 AI I 4DMU 6ES GB10-0AB0 Analog input module 2 AI; 4-wire measuring transducer (+/-20 ma, ma) / 13 bits; standard 2 AI I 4DMU 6ES GB11-0AB0 Analog input module 2 AI; 4-wire measuring transducer (+/-20 ma, ma) / 13 bits; standard 2 AI I TC 6ES JB00-0AB0 Analog input module 2 AI TC; 15 bits; standard 2 AI I TC 6ES JB01-0AB0 Analog input module 2 AI TC; 15 bits; standard 2 AI I RTD 6ES JB50-0AB0 Analog input module 2 AI RTD; 15 bits; standard 2 AI I RTD 6ES JB51-0AB0 Analog input module 2 AI RTD; 15 bits; standard 2 AI U 6ES LB00-0AB0 Analog input module 2 AI; ( V, +/- 5 V, +/- 10 V) / 15 bits; high-resolution 2 AI U 6ES LB02-0AB0 Analog input module 2 AI; ( V, +/- 5 V, +/- 10 V) / 15 bits; high-resolution 2 AI I 6ES MB00-0AB0 Analog input module 2 AI; (+/-20 ma, ma) / 15 bits, high-resolution 2 AI I 6ES MB02-0AB0 Analog input module 2 AI; (+/-20 ma, ma) / 15 bits, high-resolution 2 AI I TC High Feature 6ES NB00-0AB0 Analog input module 2 AI TC; 15 bits; high feature 07/ 05 04/ 05 05/ 05 09/ 08 09/ 08 06/ 06 06/ 06 09/ 05 Catalog Overview, 05/2014, A5E AA 27
28 ET 200S 5.2 AO 2 AI I TC High Feature 2 AI I RTD High Feature 2 AI I RTD High Feature 6ES NB01-0AB0 6ES NB50-0AB0 6ES NB51-0AB0 Analog input module 2 AI TC; 15 bits; high feature Analog input module 2 AI RTD; 15 bits; high feature Analog input module 2 AI RTD; 15 bits; high feature 11/ AO 2 AO U 6ES FB00-0AB0 Analog output module 2 AO; V / 12 Bit, +/-10 V / 13 bits; standard 2 AO U 6ES FB01-0AB0 Analog output module 2 AO; V / 12 Bit, +/-10 V / 13 bits; standard 2 AO I 6ES GB00-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 13 bits; standard 2 AO I 6ES GB01-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 13 bits; standard 2 AO U 6ES LB00-0AB0 Analog output module 2 AO; ( V, +/-10 V) / 15 bits; high-resolution 2 AO U 6ES LB01-0AB0 Analog output module 2 AO; ( V, +/-10 V) / 15 bits; high-resolution, supports isochronous mode 2 AO U 6ES LB02-0AB0 Analog output module 2 AO; ( V, +/-10 V) / 15 bits; high-resolution, supports isochronous mode 2 AO I 6ES MB00-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 15 bits; high-resolution 2 AO I 6ES MB01-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 15 bits, high-resolution, supports isochronous mode 2 AO I 6ES MB02-0AB0 Analog output module 2 AO; (+/-20 ma, ma) / 15 bits; high-resolution, supports isochronous mode 05/ 05 05/ 05 08/ 03 06/ 06 08/ 03 06/ Catalog Overview, 05/2014, A5E AA
29 ET 200S 5.3 DI 5.3 DI 2 DI DC24V 6ES BB00-0AA0 Digital input module 2 DI; 24 V DC; standard 2 DI DC24V 6ES BB01-0AA0 Digital input module 2 DI; 24 V DC; standard 4 DI DC24V 6ES BD00-0AA0 Digital input module 4 DI; 24 V DC; standard 4 DI DC24V 6ES BD01-0AA0 Digital input module 4 DI; 24 V DC; standard 2 DI DC24V High Feature 2 DI DC24V High Feature 4 DI DC24V High Feature 4 DI DC24V High Feature 8 DI DC24V High Speed 6ES BB00-0AB0 6ES BB01-0AB0 6ES BD00-0AB0 6ES BD01-0AB0 6ES BF00-0AA0 Digital input module 2 DI; 24 V DC; High Feature; with diagnostics Digital input module 2 DI; 24 V DC; High Feature; with diagnostics Digital input module 4 DI; 24 V DC; High Feature; with diagnostics Digital input module 4 DI; 24 V DC; High Feature; with diagnostics Digital input module 8 DI; DC 24 V;supports isochronous mode 4 DI 6ES CD00-0AB0 Digital input module 4 DI; UC V; High Feature; with diagnostics 4 DI UC V HF 6ES CD02-0AB0 Digital input module 4 DI; UC V; High Feature; with diagnostics 2 DI AC 120V 6ES EB00-0AB0 Digital input module 2 DI; 120 V AC 2 DI AC 230V 6ES FB00-0AB0 Digital input module 2 DI; 120 V AC 4 DI NAMUR 6ES RD00-0AB0 Digital input module 4 DI NAMUR; with diagnostics 4 DI NAMUR 6ES RD02-0AB0 Digital input module 4 DI NAMUR; with diagnostics 8 DI DC 24V 6ES FA00-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 04/ 05 04/ 05 06/ 05 05/ 05 08/ 10 10/ 10 06/ 04 Catalog Overview, 05/2014, A5E AA 29
30 ET 200S 5.4 DO 8 DI DC 24V 6ES FA01-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DIsafety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 8 DI DC 24V 6ES FA02-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 8 DI DC 24V 6ES FA03-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 8 DI DC 24V 6ES FA04-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 8 DI DC 24V 6ES FA05-0AB0 Digital input module 4 / 8 DI; 24 V DC; 8 DI safety-related SIL-2 or 4 DI safety-related SIL-3, with diagnostics 10/ 05 01/ 07 10/ DO 2 DO DC24V/0.5A 2 DO DC24V/0.5A 2 DO DC24V/2A 2 DO DC24V/2A 2 DO DC24V/0.5A High Feature 2 DO DC24V/0.5A High Feature 6ES BB00-0AA0 6ES BB01-0AA0 6ES BB30-0AA0 6ES BB31-0AA0 6ES BB00-0AB0 6ES BB01-0AB0 2 DO; 24 V DC / 0.5 A; standard 2 DO; 24 V DC / 0.5 A; standard 2 DO; 24 V DC / 2 A; standard 2 DO; 24 V DC / 2 A; standard 2 DO; 24 V DC / 0.5 A; High Feature; with diagnostics 2 DO; 24 V DC / 0.5 A; High Feature; with diagnostics 04/ 05 04/ 05 09/ Catalog Overview, 05/2014, A5E AA
31 ET 200S 5.4 DO 2 DO DC24V/2A High Feature 2 DO DC24V/2A High Feature 4 DO DC24V/0.5A 4 DO DC24V/0.5A High Feature 4 DO DC24V/0.5A 4 DO DC24V/0.5A 4 DO DC24V/2A 4 DO DC24V/2A High Feature 4 DO DC24V/2A 4 DO DC24V/2A 8 DO DC24V/0.5A High Speed 8 DO DC24V/0.5A High Feature 2 DO AC 120/230V/ 1A 2 DO AC 120/230V/ 1A 2 DO Rel V/5A 2 DO Rel V/5A 2 DO Rel V/5A 2 DO Rel V/5A 4 DO DC 24V/2A 6ES BB30-0AB0 6ES BB31-0AB0 6ES BD00-0AA0 6ES BD00-0AB0 6ES BD01-0AA0 6ES BD02-0AA0 6ES BD30-0AA0 6ES BD30-0AB0 6ES BD31-0AA0 6ES BD32-0AA0 6ES BF00-0AA0 6ES BF00-0AB0 6ES FB00-0AB0 6ES FB01-0AB0 6ES HB00-0AB0 6ES HB01-0AB0 6ES HB10-0AB0 6ES HB12-0AB0 6ES FB00-0AB0 2 DO; 24 V DC / 2 A; High Feature; with diagnostics 2 DO; 24 V DC / 2 A; High Feature; with diagnostics 4 DO; 24 V DC / 0.5 A; standard 4 DO; 24 V DC / 0.5 A; High Feature; with diagnostics 4 DO; 24 V DC / 0.5 A; standard 4 DO; 24 V DC / 0.5 A; standard 4 DO; 24 V DC / 2 A; standard 4 DO; 24 V DC / 2 A; High Feature, with diagnostics 4 DO; 24 V DC / 2 A; standard 4 DO; 24 V DC / 2 A; standard 8 DO; 24 V DC/ 0.5 A; supports isochronous mode 8 DO; 24 V DC/ 0.5 A; High Feature, with diagnostics, supports isochronous mode 2 DO; 120 / 230 V, 1 A AC 2 DO; 120 / 230 V, 1 A AC 2 relays; V / 5 A UC 2 relays; V / 5 A UC 2 relays; form C; V / 5 A UC 2 relays; form C; V / 5 A UC 4 DO; 24 V / 2 A; DC safety-related up tosil-3, with diagnostics, M-switching 07/ 05 05/ 05 10/ 10 04/ 05 05/ 07 01/ 07 04/ 05 05/ 11 06/ 04 Catalog Overview, 05/2014, A5E AA 31
32 ET 200S 5.6 IM 4 DO DC 24V/2A 4 DO DC 24V/2A 4 DO DC 24V/2A 4 DO DC 24V/2A 6ES FB01-0AB0 6ES FB02-0AB0 6ES FB03-0AB0 6ES FB04-0AB0 4 DO; 24 V / 2 A; DC safety-related up tosil-3, with diagnostics, M-switching 4 DO; 24 V / 2 A; DC safety-related up tosil-3, with diagnostics, M-switching 4 DO; 24 V / 2 A; DC safety-related up tosil-3, with diagnostics, M-switching 4 DO; 24 V / 2 A; DC safety related to SIL-3, with diagnostics, M switching 10/ 05 10/ FM Counter module, 24 V/100 khz 6ES DA04-0AB0 Counter module, 24 V / 100 khz; for single, continuous and periodic counting, supports isochronous mode (only counting and measuring modes have been released for CS 7) 5.6 IM IM ES BA00-0AB0 Interface module IM for ET 200S; high feature IM ES BA01-0AB0 Interface module IM for ET 200S; high feature IM ES BA02-0AB0 Interface module IM for ET 200S; high feature X 10/ 05 X 03/ 07 X 32 Catalog Overview, 05/2014, A5E AA
33 ET 200S 5.7 S 5.7 S M-E DC24V 6ES CA00-0AA0 ower supply, DC 24 V; with diagnostics M-E DC24V 6ES CA01-0AA0 ower supply, DC 24 V; with diagnostics M-E DC24V HF 6ES CA60-0AB0 ower supply, DC 24 V; with diagnostics, high feature M-E DC24V/ AC120/230V M-E DC24V..48/ AC V 6ES CB10-0AB0 6ES CB11-0AB0 ower supply, DC 24 V; AC 120 V or 230 V; with diagnostics and fuse ower supply, DC V, AC V; with diagnostics and fuse M-E DC24V 6ES CF00-0AB0 ower supply, DC 24 V; safety-related, with 2 DO 24V M-switching; with diagnostics M-E DC24V 6ES CF01-0AB0 ower supply, DC 24 V; safety-related, with 2 DO 24V M-switching; with diagnostics M-E DC24V 6ES CF02-0AB0 ower supply, DC 24 V; safety-related, with 2 DO 24V M-switching; with diagnostics M-E DC24V 6ES CF03-0AB0 ower supply, DC 24 V; safety-related, with 2 DO 24V M-switching; with diagnostics M-E DC24V 6ES CF42-0AB0 ower supply, DC 24 V; safety-related, -switching; with diagnostics M-D DC24V 3RK BA00 ower supply, DC 24 V; 2 M-D; DC 24 V M-D F1 SIGUARD 3RK BA00 ower supply; EMERGENC OFF; monitored start-up; 2- channel M-D F2 SIGUARD 3RK BB00 ower supply; protective door; autostart; 2-channel M-D F4 SIGUARD 3RK BC00 ower supply; extension to F1/2 for additional potential group 04/ 05 11/ 06 06/ 04 10/ 05 10/ 08 Catalog Overview, 05/2014, A5E AA 33
34 ET 200S 5.8 Terminal module M-D F3 SIGUARD 3RK BD00 ower supply; extension to F1/2 for additional potential group; time-delayed M-D F5 SIGUARD 3RK BE00 ower supply; extension to M-D F1 to M-D F4; contact multiplier M-X SIGUARD 3RK CB00 Connection module for incoming feeder protection; external safety circuits M-D F ROFIsafe 3RK BA00 ower supply for 6 vector groups; safety-related M-D F ROFIsafe 3RK BA01 ower supply for 6 vector groups; safety-related M-D F ROFIsafe 3RK BA02 ower supply for 6 vector groups; safety-related F-CM 3RK CA00 Contact multiplier; extension to M-D F ROFIsafe; M-D F X1 3RK DA00 ower supply/expansion module; overvoltage protection; for supplying external EMERGENC OFF signals; for 6 vector groups 10/ Terminal module TM-E15x26-A1 6ES CAx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-E15x24-A1 6ES CAx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-E15x ES CBx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-E15x ES CBx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals 34 Catalog Overview, 05/2014, A5E AA
35 ET 200S 5.8 Terminal module TM-E15x24-AT 6ES CLx0-0AA0 Terminal module for electronic modules 2 AI TC HF; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-E30x46-A1 6ES CFx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-E30x ES CGx0-0AA0 Terminal module for electronic modules; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-15x23-A1 6ES CCx0-0AA0 Terminal module for power supply; pass-through AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-15x23-A0 6ES CDx0-0AA0 Terminal module for power supply; interrupted AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-15x ES CEx0-0AA0 Terminal module for power supply; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-30x44-A0 6ES CKx0-0AA0 Terminal module for fail-safe power supply M-E F; interrupted AUX rail to adjacent potential group on the left; access to AUX1 potential via terminals TM-15S RK AA00 Terminal module for power supply M-D; with end cover TM-F30S47-B1 3RK AA00 Terminal module SIGUARD M-D F 1,2; for potential group, supply U1, U2, sensor connection TM-F30S47-B0 3RK AA10 Terminal module for SIGUARD M-D F 1,2 for potential subgroup, sensor connection TM-F30S47-C1 3RK AC00 Terminal module SIGUARD M-D F 3,4 for potential group, supply U1, U2 TM-F30S47-C0 3RK AC10 Terminal module SIGUARD M-D F 3,4 for potential subgroup, supply U2 Catalog Overview, 05/2014, A5E AA 35
36 ET 200S 5.9 Motor starter TM-F30S47-D0 3RK AD10 Terminal module SIGUARD M-D F 5 for contact multipliers TM-X15 S RK AB00 Terminal module for connection module M- X connection unit for supply contactor TM-F30S47-F1 3RK AA00 Terminal module for fail-safe power supply M-D F; pass-through AUX rail to adjacent potential group on the left; no access to AUX1 potential via terminals TM-FCM30S47-E0 3RK AB10 Terminal module for F-CM; with bushing for U1 TM-FX30S47-G1 3RK AE00 Terminal module for M-D F X1; for potential group; no supply from left for U1 TM-FX30S47-G0 3RK AE10 Terminal module for M-D F X1; for potential group; with supply from left for U1 5.9 Motor starter DS1e-x 0,3-3 A High Feature DS1e-x 0,3-3 A High Feature 3RK AB10-0AA2 3RK AB10-0AA3 Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; high feature Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature 05/ Catalog Overview, 05/2014, A5E AA
37 ET 200S 5.9 Motor starter DS1e-x 0,3-3 A High Feature DS1e-x 2,4-8 A High Feature DS1e-x 2,4-8 A High Feature DS1e-x 2,4-8 A High Feature DS1e-x 2,4-16 A High Feature DS1e-x 2,4-16 A High Feature 3RK AB10-0AA4 3RK BB10-0AA2 3RK BB10-0AA3 3RK BB10-0AA4 3RK CB10-0AA2 3RK CB10-0AA3 Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2,4 A to 8A; Option: Brake control module, control module; high feature Direct starter; DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2,4 A to 8 A; Option: Brake control module, control module; switch ES; high feature Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2,4 A to 8 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned Direct starter DS1e-x A; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2,4 A to 16 A; Option: Brake control module, control module; high feature Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2,4 A to 16 A; Option: Brake control module, control module; switch ES; high feature 05/ 04 05/ 04 Catalog Overview, 05/2014, A5E AA 37
38 ET 200S 5.9 Motor starter DS1e-x 2,4-16 A High Feature DSS1e-x 0,3-3 A High Feature DSS1e-x 0,3-3 A High Feature DSS1e-x 0,3-3 A High Feature DSS1e-x 2,4-8 A High Feature DSS1e-x 2,4-8 A High Feature 3RK CB10-0AA4 3RK AB20-0AA2 3RK AB20-0AA3 3RK AB20-0AA4 3RK BB20-0AA2 3RK BB20-0AA3 Direct starter DS 1e-x; A; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2,4 A to 16 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned Direct soft starter DSS 1e-x A; electronic switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0,30 A to 3,00 A; Option: Brake control module, control module; high feature Direct starter DSS 1e-x; A; electronic switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature Direct starter DSS 1e-x; A; electronic switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature Direct soft starter DSS 1 e-x; A; electronic switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; high feature Direct soft starter DSS 1e-x; 2,4-8 A; electronic switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; switch ES; high feature 05/ 04 05/ Catalog Overview, 05/2014, A5E AA
39 ET 200S 5.9 Motor starter DSS1e-x 2,4-8 A High Feature DSS1e-x 2,4-16 A High Feature DSS1e-x 2,4-16 A High Feature DSS1e-x 2,4-16 A High Feature RS1e-x (0,3-3A) High Feature RS1e-x (0,3-3A) High Feature 3RK BB20-0AA4 3RK CB20-0AA2 3RK CB20-0AA3 3RK CB20-0AA4 3RK AB10-1AA2 3RK AB10-1AA3 Direct soft starter DSS 1e-x; A; electronic switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; switch ES; high feature Direct starter DSS 1e-x; A; electronic switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; high feature Direct starter DSS 1e-x; A; electronic switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; switch ES; high feature Direct starter DSS 1e-x A; electronic switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; switch ES; high feature Reversing starter RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; high feature Reversing starter RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; switch ES; high feature 05/ 04 05/ 04 Catalog Overview, 05/2014, A5E AA 39
40 ET 200S 5.9 Motor starter RS1e-x (0,3-3A) High Feature RS1e-x (2,4-8A) High Feature RS1e-x (2,4-8A) High Feature RS1e-x (2,4-8A) High Feature RS1e-x (2,4-16A) High Feature 3RK AB10-1AA4 3RK BB10-1AA2 3RK BB10-1AA3 3RK BB10-1AA4 3RK CB10-1AA2 Reversing starter RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A bis 3 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned Reversing starter RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; high feature Reversing starter RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; switch ES; high feature Reversing starter RS 1e-x; 2,4-8 A; high feature; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned Reversing starter RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; high feature 05/ 04 05/ Catalog Overview, 05/2014, A5E AA
41 ET 200S 5.10 F motor starter RS1e-x (2,4-16A) High Feature RS1e-x (2,4-16A) High Feature 3RK CB10-1AA3 3RK CB10-1AA4 Reversing starter RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; switch ES; high feature Reversing starter RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; switch ES; high feature; circuit-breaker notification can be assigned 5.10 F motor starter F-DS1e-x 0,3-3 A High Feature F-DS1e-x 0,3-3 A High Feature 3RK AB13-0AA2 3RK AB13-0AA4 Safe direct starter F-DS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe Safe direct starter F-DS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe; circuitbreaker notification can be assigned Catalog Overview, 05/2014, A5E AA 41
42 ET 200S 5.10 F motor starter F-DS1e-x 2,4-8 A High Feature F-DS1e-x 2,4-8 A High Feature F-DS1e-x 2,4-16 A High Feature F-DS1e-x 2,4-16 A High Feature F-RS1e-x 0,3-3 A High Feature 3RK BB13-0AA2 3RK BB13-0AA4 3RK CB13-0AA2 3RK CB13-0AA4 3RK AB13-1AA2 Safe direct starter F-DS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe Safe direct starter F-DS 1e-x; 2,4-8 A; high feature; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe; circuitbreaker notification can be assigned Safe direct starter F-DS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe Safe direct starter F-DS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe; circuitbreaker notification can be assigned Safe reversing starter F-RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe 42 Catalog Overview, 05/2014, A5E AA
43 ET 200S 5.10 F motor starter F-RS1e-x 0,3-3 A High Feature F-RS1e-x 2,4-8 A High Feature F-RS1e-x 2,4-8 A High Feature F-RS1e-x 2,4-16 A High Feature F-RS1e-x 2,4-16 A High Feature 3RK AB13-1AA4 3RK BB13-1AA2 3RK BB13-1AA4 3RK CB13-1AA2 3RK CB13-1AA4 Safe reversing starter F-RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 1.1 K / 400 V; 0.3 A to 3 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe; circuitbreaker notification can be assigned Safe reversing starter F-RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe Safe reversing starter F-RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 3 K / 400 V; 2.4 A to 8 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe; circuitbreaker notification can be assigned Safe reversing starter F-RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe Safe reversing starter F-RS 1e-x; A; high feature; mechanical switching; electronic UE protection; no fuse; up to 7.5 K / 400 V; 2.4 A to 16 A; Option: Brake control module, control module; high feature; for M-D F ROFIsafe; circuitbreaker notification can be assigned Catalog Overview, 05/2014, A5E AA 43
SIMATIC. Process Control System PCS 7 Released Modules (V8.0 SP2) Security information 1 ET 200M 2. Gateway 3 ET 200S 4. ET 200iSP 5 ET 200S 6
Security information 1 ET 200M 2 SIMATIC rocess Control System CS 7 Offer overview Gateway 3 ET 200S 4 ET 200iS 5 ET 200S 6 ET 200X 7 ET 200pro 8 Repeater 9 Network Components 10 C 11 C-based automation
More informationSIMATIC. Process Control System PCS 7 Released modules (V8.0) ET 200M 1. Gateway 2 ET 200S 3. ET 200iSP 4 ET 200S 5 ET 200X 6.
ET 200M 1 Gateway 2 SIMATIC rocess Control System CS 7 Catalog Overview ET 200S 3 ET 200iS 4 ET 200S 5 ET 200X 6 ET 200pro 7 Repeater 8 Network Components 9 C 10 C-based automation 11 CS 7 12 S7-300 13
More informationSIMATIC. Process Control System PCS 7 Released modules (V8.2) Security information 1 ET 200M 2. Gateway 3 ET 200PA SMART 4 ET 200S 5.
SIMATIC rocess Control System CS 7 Offer overview Valid for CS 7 as of V8.2 Security information 1 ET 200M 2 Gateway 3 ET 200A SMART 4 ET 200S 5 ET 200iS 6 ET 200S 7 ET 200S 8 ET 200X 9 ET 200pro 10 Repeater
More informationET 200S distributed I/O system 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32-0AA0)
4DO DC24V/2A ST digital electronic module (6ES7132-4BD32- SIMATIC Preface 1 Properties 2 Diagnostics 3 ET 200S distributed I/O system 4DO DC24V/2A ST digital electronic module (6ES7132-4BD32- Manual 10/2015
More informationPower module PM-E DC24V HF SIMATIC. ET 200S distributed I/O Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) Preface. Properties.
Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) SIMATIC ET 200S distributed I/O Power module PM-E DC24V HF (6ES7138-4CA60-0AB0) Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 Manual 06/2010
More informationBlock Library Motor Starter SIRIUS for SIMATIC PCS 7
Industrial Controls Block Library Motor Starter SIRIUS for SIMATIC PCS 7 SIRIUS Motor Starter PCS 7 Library V7.1+SP2 / SIRIUS Motor Starter PCS 7 Library V8 Migration 8.0+SP1 Getting Started Edition 08/2013
More informationPower module PM-E DC24V/8A RO SIMATIC. ET 200S distributed I/O Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) Preface. Properties.
Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) SIMATIC ET 200S distributed I/O Power module PM-E DC24V/8A RO (6ES7138-4CA80-0AB0) Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 Manual
More informationProduct Information Mixed. Configuration ET 200SP / ET 200AL SIMATIC. ET 200SP Product Information Mixed Configuration ET 200SP / ET 200AL.
Product Information Mixed Configuration ET 200SP / ET 200AL SIMATIC ET 200SP Product Information Mixed Configuration ET 200SP / ET 200AL Product Information Preface Application planning 1 Mounting 2 Connection
More informationPROFIenergy product information SIMATIC. ET 200SP PROFIenergy product information. PROFIenergy 1. Product Information 12/2015 A5E AH
PROFIenergy 1 SIMATIC ET 200SP Product Information 12/2015 A5E03871936-AH Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,
More informationDANGER indicates that death or severe personal injury will result if proper precautions are not taken.
SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O Digital electronic module 4DI DC24V HF (6ES7131-4BD01-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 04/2007 A5E01077141-01
More informationSIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01-0AA0) Preface. Properties 1. Diagnostics 2.
SIMATIC ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A ST (6ES7132-4BD01- SIMATIC Preface Properties 1 Diagnostics 2 ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5 A
More informationShort Description. Version
S7-400 S7-400 CP 443-1 6GK7 443-1EX11-0XE0 V2.6 S7 CP for Industrial Ethernet ISO and TCP/IP with SEND/RECEIVE and FETCH/WRITE interface, long data, UDP, TCP, ISO, S7 communication, routing, module replacement
More informationSIMATIC. Digital Input Module SM DI, DC24V - Sinking/Sourcing. Product information. Product Information
SIMATIC Digital Input Module Product information 1 SIMATIC Digital Input Module Product Information This documentation is part of the documentation package with the order number: S7-300 Automation System:
More informationUse with 0 to 70 C ambient. temperature SIMATIC. Process Control System PCS 7 Use with 0 to 70 C ambient temperature. Preface 1. Product combination 2
Use with 0 to 70 C ambient temperature SIMATIC Preface 1 Product combination 2 Product family 3 Process Control System PCS 7 Use with 0 to 70 C ambient temperature System Manual 02/2015 A5E35458345-AA
More informationDANGER indicates that death or severe personal injury will result if proper precautions are not taken.
Preface SIMATIC ET 200S distributed I/O Digital electronic module 2RO NO/NC DC24..48V/5A AC24..230V/5A (6ES7132-4HB50-0AB0) SIMATIC ET 200S distributed I/O Digital electronic module 2RO NO/NC DC24..48V/5A
More informationET 200S distributed I/O Digital electronic module 2DO AC V (6ES7132-4FB01-0AB0)
SIMATIC ET 200S distributed I/O SIMATIC Preface ET 200S distributed I/O Digital electronic module 2DO AC24..230V (6ES7132-4FB01-0AB0) Properties 1 Parameters 2 Diagnostics 3 Manual 04/2007 A5E01077264-01
More informationDI 8x24VDC ST digital input module SIMATIC. ET 200SP DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) Preface. Documentation guide
DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) SIMATIC ET 200SP DI 8x24VDC ST digital input module (6ES7131-6BF00-0BA0) Manual Preface Documentation guide 1 Product overview 2 Connecting 3 Parameter
More informationSIMATIC. ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02-0AA0) Preface. Properties 2. Diagnostics 3.
Preface 1 Properties 2 SIMATIC Diagnostics 3 ET 200S distributed I/O Digital electronic module 4DO DC24V/0.5A ST (6ES7132-4BD02- Manual 01/2008 A5E01254028-01 Safety Guidelines This manual contains notices
More informationS7-400 CPU ES XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI;
S7-400 CPU 412-1 6ES7 412-1XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; 0.075 ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI; send and receive capability for direct data exchange;
More informationBaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) SIMATIC. ET 200SP BaseUnits. Preface. Guide to the documentation 1. Product overview 2
BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) SIMATIC ET 200SP BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) Manual Preface Guide to the documentation 1 Product overview 2 BaseUnits for I/O modules 3 BaseUnits
More informationReadme SiVArc V14 SP1 Update 6
Product version 1 Improvements in Update 6 2 Readme 05/2018 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as
More informationST (6ES7132-6FD00-0BB1)
SIMATIC ET 200SP Digital output module DQ 4x24..230VAC/2A ST (6ES7132-6FD00-0BB1) Manual Edition 02/2014 Answers for industry. DQ 4x24..230VAC/2A ST Preface Guide to documentation 1 SIMATIC ET 200SP DQ
More informationTeam engineering via Inter Project. Engineering. TIA Portal. Team engineering via Inter Project Engineering. Basics of "Inter Project Engineering"
Team engineering via Inter Project Engineering TIA Portal Basics of "Inter Project Engineering" 1 Creating an IPE file 2 Importing an IPE file 3 Team engineering via Inter Project Engineering Getting Started
More informationProduct Information on the Manual
Edition 12.2004 S7-300 Programmable Controller; Module Specifications, as of Edition 02/2004 (A5E00105505) ET 200M Distributed I/O Device Signal Modules for Process Automation, as of Edition 10/2004 (A5E00085262)
More informationSIMATIC S plus TIA Portal
Product range overview SIMATIC S7-1500 plus TIA Portal Power + Efficiency The ultimate plus in automation Intuitive, efficient, proven TIA Portal redefines engineering Answers for industry. Your plus of
More informationSIMATIC. Process Control System PCS 7 VT Readme V8.2 (online) Security information 1. Overview 2. Notes on Installation 3. Notes on usage 4.
Security information 1 Overview 2 SIMATIC Process Control System PCS 7 Notes on Installation 3 Notes on usage 4 Readme 04/2016 A5E36515375-AA Legal information Warning notice system This manual contains
More informationSIMATIC. ET 200S distributed I/O Power module PM-E DC24..48V (6ES7138-4CA50-0AB0) Preface. Properties 1. Parameters 2. Diagnostics 3.
SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O Power module PM-E DC24..48V (6ES7138-4CA50-0AB0) Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 Manual 04/2007 A5E01119980-01
More informationDevice manual SINAMICS SINAMICS G120. Distributed inverter box Control cabinet for wall or floor mounting.
Device manual SINAMICS SINAMICS G120 Control cabinet for wall or floor mounting Edition 06/2018 www.siemens.com/drives Safety note 1 Description 2 SINAMICS SINAMICS G120 Manual Mounting 3 Connection 4
More informationIntrinsic Safety Control Drawing
s Intrinsic Safety Control Drawing system in total PLC PC Not hazardous area PROFIBUS DP Associated Apparatus Class I, DIV 2, GP A...D Class I, ZN 1, IIC T4 PROFIBUS-DP Ex i Terminating resistor Class
More informationSIMATIC. Distributed I/O Device ET 200iSP. Preface, Contents. Product Overview Getting Started with Commissioning. Configuration Options.
SIMATIC Distributed I/O Device ET 200iSP Manual This documentation is available under order number 6ES7152-1AA00-8BA0 Preface, Contents Product Overview Getting Started with Commissioning Configuration
More informationIndustrial Controls. Motor management and control devices SIMOCODE pro - Application examples. Introduction 1. Application example
Introduction 1 Application example 2 Industrial Controls Motor management and control devices SIMOCODE pro - Application examples Application Manual Example circuits control functions 3 Further application
More informationCreating the program. TIA Portal. SIMATIC Creating the program. Loading the block library 1. Deleting program block Main [OB1]
Loading the block library 1 Deleting program block Main [OB1] 2 TIA Portal SIMATIC Getting Started Copying program blocks 3 Copying tag tables 4 Compiling a project 5 Load project into the CPU 6 03/2013
More informationClass documentation. COMOSKDictionary COMOS. Platform Class documentation COMOSKDictionary. Trademarks. General. KDictionary. Programming Manual
Class documentation COMOSKDictionary COMOS Trademarks 1 General 2 KDictionary 3 Platform Class documentation COMOSKDictionary Programming Manual 04/2012 A5E03777026-01 Legal information Legal information
More informationSIMATIC. ET 200S distributed I/O Power module PM-E DC24..48V/AC V (6ES7138-4CB11-0AB0) Preface. Properties 1. Parameters 2.
SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O Power module PM-E DC24..48V/AC24..230V (6ES7138-4CB11-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 Configuring 4 04/2007
More informationSIMATIC. Process Control System PCS 7 PCS 7 system documentation - Readme V8.0 SP2 (Update 1) Options for Accessing Documentation 1
Options for Accessing Documentation 1 Notes on the Product Documentation 2 SIMATIC Notes on the PCS 7 V8.0 SP2 system documentation 3 Process Control System PCS 7 PCS 7 system documentation - Readme V8.0
More informationPerformance data abgn SCALANCE W770/W730 SIMATIC NET. Industrial Wireless LAN Performance data abgn SCALANCE W770/W730.
Performance data 802.11 abgn SCALANCE W770/W730 Technical data 1 SIMATIC NET Industrial Wireless LAN Performance data 802.11 abgn SCALANCE W770/W730 Reference Manual 07/2014 C79000-G8976-C370-01 Legal
More informationSIMATIC. Process Control System PCS 7 Licenses and quantity structures (V8.0) Preface 1. Selecting the correct license keys 2
Preface 1 Selecting the correct license keys 2 SIMATIC Process Control System PCS 7 Licenses and quantity structures (V8.0) Licensing of PC stations 3 Data volumes 4 Installation Manual 05/2012 A5E03805083-02
More informationPerformance data abgn PCIe Minicard MPCIE-R1-ABGN-U3 SIMATIC NET
Performance data 802.11abgn PCIe Minicard MPCIE-R1-ABGN-U3 Technical specifications 1 SIMATIC NET Industrial Wireless LAN Performance data 802.11abgn PCIe Minicard MPCIE-R1-ABGN-U3 Reference Manual 07/2014
More informationCOMOS. Platform Class documentation RevisionMaster_dll. Class: RevisionInfo 1. Class: RevisionMaster 2. Programming Manual
Class: RevisionInfo 1 Class: RevisionMaster 2 COMOS Platform Class documentation RevisionMaster_dll Programming Manual 03/2017 V10.2.1 A5E39859923-AA Legal information Warning notice system This manual
More informationLoad Feeders. Communication-capable load feeders
Load Feeders /2 Introduction Communication-capable load feeders ET 200S /4 ET 200S motor starters /8 Power modules for ET 200S motor starters /9 SIGUARD safety systems for ET 200S motor starters /10 ET
More informationSIMATIC. ET 200S distributed I/O 2AO U HF analog electronic module (6ES7135-4LB02-0AB0) Preface. Properties 1. Parameters 2.
SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O 2AO U HF analog electronic module (6ES7135-4LB02-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 Analog value representation
More informationDANGER indicates that death or severe personal injury will result if proper precautions are not taken.
Introduction 1 SIMATIC Embedded Automation Programming 2 Functions 3 A Appendix Programming Manual 08/2010 A5E01716340-03 Legal information Legal information Warning notice system This manual contains
More informationLine reactors SINAMICS. SINAMICS G120P Line reactors. Safety information 1. General. Mechanical installation 3. Electrical installation 4
Safety information 1 General 2 SINAMICS SINAMICS G120P Mechanical installation 3 Electrical installation 4 Technical specifications 5 Operating Instructions Control version V4.6 11/2013 A5E32845290B AA
More informationDigital output module. DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0) SIMATIC
Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0) SIMATIC S7-1500/ET 200MP Digital output module DQ 16x24VDC/0.5A BA (6ES7522-1BH10-0AA0) Manual Preface Documentation guide 1 Product overview
More informationNo. Product Information Drawing number Edition
SIMATIC Bus links SIMATIC Bus links SIMATIC Bus links DP/PA coupler, DP/PA link and Y link Operating instructions The following supplement is part of this documentation: No. Product Information Drawing
More informationCertificate Z SIMATIC S7 Distributed Safety
Annex 1 of the Report to the Certificate Z10 16 06 67803 012 Safety-Related Programmable System SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision
More informationSIMATIC. S7/HMI SIMATIC Automation Tool V3.1 SP1 product information. SIMATIC Automation Tool features 1. Known problems. Product Information
SIMATIC Automation Tool features 1 Known problems 2 SIMATIC S7/HMI SIMATIC Automation Tool V3.1 SP1 product information Product Information V3.1 SP1, 05/2018 A5E43714043-AA Legal information Warning notice
More informationSIMATIC. Process Control System PCS 7 Product Brief on Software Updates from V5.1/V5.2 to PCS 7 V7.0 SP1. Preface 1
SIMATIC Process Control System PCS 7 SIMATIC Process Control System PCS 7 Product Brief on Software Updates from V5.1/V5.2 to PCS 7 V7.0 SP1 Commissioning Manual Preface 1 Before beginning the software
More informationCertificate Z SIMATIC S7 Distributed Safety
Annex 1 of the Report to the Certificate Z10 17 05 67803 015 Safety-Related Programmable System SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision
More informationET 200S Motor Starters and Safety Motor Starters
Overview for Standard motor starters Control kit The control kit for the Standard motor starter provides the possibility of testing the motor during start-up or service by actuating the motor starter protector.
More informationIndustrial Controls. SIMOCODE pro SIMOCODE pro PCS 7 Library. Preface. Security information. Product specific security. information.
Industrial Controls SIMOCODE pro Preface 1 Product specific security Security information 2 information 3 Introduction 4 5 References 6 List of Abbreviations 7 10/2018 A5E36558134002A/RS-AB/002 Legal information
More informationMindSphere. Visual Explorer. Introduction. User roles for "Visual Explorer" Connecting "Visual Explorer" to MindSphere data. Creating Visualizations
Introduction 1 User roles for "Visual Explorer" 2 MindSphere Connecting "" to MindSphere data 3 Creating Visualizations 4 Getting Started 06/2018 Legal information Warning notice system This manual contains
More informationProduct information on the documentation of the. ET 200SP distributed I/O system SIMATIC ET 200SP. ET 200SP distributed I/O system.
Product information on the documentation of the ET 200SP distributed I/O system SIMATIC Preface Overview of the ET 200SP 1 General additions to the documentation 2 ET 200SP Product information on the documentation
More informationS7-300 Getting Started - Commissioning a CPU 31xC: Closed-loop control
Getting Started - Commissioning a CPU Introduction 1 31xC: Closed-loop control Preparation 2 SIMATIC S7-300 Getting Started - Commissioning a CPU 31xC: Closed-loop control Learning units 3 Further Information
More informationSIMATIC. ET 200SP DQ 4x VAC/2A ST digital output module (6ES7132-6FD00-0BB1) Preface. Guide to documentation. Product overview.
Preface Guide to documentation 1 SIMATIC ET 200SP DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1) Manual Product overview 2 Wiring 3 Parameter assignment/addressing 4 Interrupts/diagnostics
More informationSIMATIC. ET 200S distributed I/O 2AO U ST analog electronic module (6ES7135-4FB01-0AB0) Preface. Properties 1. Parameters 2.
SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O 2AO U ST analog electronic module (6ES7135-4FB01-0AB0) Manual Preface Properties 1 Parameters 2 Diagnostics 3 Analog value representation
More informationIO-Link Master (6ES7147-4JD00-0AB0) SIMATIC. ET 200pro IO-Link Master (6ES7147-4JD00-0AB0) Preface. Documentation guide. Product overview.
IO-Link Master (6ES7147-4JD00-0AB0) SIMATIC ET 200pro IO-Link Master (6ES7147-4JD00-0AB0) Manual Preface Documentation guide 1 Product overview 2 Wiring 3 Parameters/address space 4 Diagnostics alarms
More informationCPU 410-5H Process Automation SIMATIC. PCS 7 process control system CPU 410-5H Process Automation. Preface 1. Introduction to CPU 410-5H
SIMATIC PCS 7 process control system System Manual Preface 1 Introduction to CPU 410-5H 2 Structure of the CPU 410-5H 3 I/O configuration variants 4 PROFIBUS DP 5 PROFINET IO 6 Operator controls and operating
More informationBẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/ Giá chưa bao gồm thuế VAT
BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/2011 - Giá chưa bao gồm thuế VAT NO I SIMATIC S7-300 Central Processing Unit 1 6ES7312-1AE13-0AB0 SIMATIC S7-300, CPU 312 CPU WITH MPI INTERFACE, INTEGRATED
More informationGetting Started - Startdrive. Startdrive SINAMICS. Introduction 1. Connecting the drive unit to the PC. Creating a project 3
Getting Started - Startdrive Introduction 1 Connecting the drive unit to the PC 2 Startdrive SINAMICS Getting Started Creating a project 3 Going online and incorporating devices 4 Commissioning the drive
More informationSIMATIC. Communications processor CP First Steps in Commissioning. Getting Started 09/2008 A5E
SIMATIC Communications processor Getting Started 09/2008 A5E02291899-01 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,
More informationFirst Steps in Commissioning CPU. 31xC: Positioning with digital output SIMATIC
First Steps in Commissioning CPU 31xC: Positioning with digital output Introduction 1 Preparation 2 SIMATIC S7-300 First Steps in Commissioning CPU 31xC: Positioning with digital output Learning units
More informationhttps://support.industry.siemens.com/cs/ww/en/view/
Support Packages for TIA Portal V13 March 2018 https://support.industry.siemens.com/cs/ww/en/view/72341852 Siemens Industry Online Support This entry is from the Siemens Industry Online Support. The general
More informationSIMATIC. ET 200SP Open Controller Product information on CPU 1515SP PC. Preface. Product Information. Technical update. Technical specifications 3
1BProduct information on CPU 1515SP PC Preface Product Information 1 SIMATIC ET 200SP Open Controller Technical update 2 Technical specifications 3 Product Information 09/2015 A5E35456639-AC 3BLegal information
More informationSiemens Spares. Setting up security in STEP 7. Professional SIMATIC NET. Industrial Ethernet Security Setting up security in STEP 7 Professional
Setting up security in STEP 7 Professional SIMATIC NET Industrial Ethernet Security Setting up security in STEP 7 Professional Preface 1 User interface and menu commands 2 Basic configuration 3 Firewall
More informationSIMATIC. Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules. Preface. Product Overview 1.
Preface SIMATIC Distributed I/O System Fail-Safe Engineering SIMATIC Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules Installation and Operating Manual Product
More informationSIMATIC Ident RFID systems MDS D423 Compact Operating Instructions
SIMATIC Ident RFID systems Compact Operating Instructions Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to
More informationConfiguration limits for products of the SIMATIC NET PC Software V8.1 SIMATIC NET
Configuration limits for products of the SIMATIC NET PC Software V8.1 SIMATIC NET Configuration limits for products of the SIMATIC NET PC Software V8.1 Application manual Communications partners and configuration
More informationparty software COMOS Platform Third-party software Trademarks 1 Requirements for the system environment Third-party software releases Operating Manual
Third- party software Trademarks 1 Requirements for the system environment 2 COMOS releases 3 Platform Operating Manual 08/2011 A5E03638321-01 Legal information Legal information Warning notice system
More informationRF-MANAGER simulator SIMATIC. RFID-Systems RF-MANAGER simulator. Simulating projects. Compact Operating Instructions 06/2010 A5E
Simulating projects 1 SIMATIC RFID-Systems Compact Operating Instructions 06/2010 A5E01074276-03 Legal information Legal information Warning notice system This manual contains notices you have to observe
More informationValidity 1. Improvements in STEP 7 2. Improvements in WinCC 3 SIMATIC. Readme. Readme
Validity 1 Improvements in STEP 7 2 SIMATIC Improvements in WinCC 3 05/2017 Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety,
More informationSetting up securityglobal FW Rulesets SIMATIC NET. Industrial Ethernet Security Setting up security. Preface. Firewall in standard mode
Global FW Rulesets SIMATIC NET Industrial Ethernet Security Preface 1 Firewall in standard mode 2 Firewall in advanced mode 3 Configuring a VPN tunnel 4 Configuring remote access via a VPN tunnel 5 Getting
More informationSiemens Drives & PLCs
Automation System S7-300: Getting Started CPU 31xC: Commissioning Introduction 1 Preparation 2 SIMATIC S7-300 Automation System S7-300: Getting Started CPU 31xC: Commissioning Learning units 3 Further
More informationSIMATIC ET 200SP Product information on documentation of the ET 200SP distributed I/O system Product Information
SIMATIC ET 200SP Product information on documentation of the ET 200SP distributed I/O system Product Information General amendments to the documentation Contents This product information includes amendments
More informationSIMATIC. Process Control System PCS 7 PCS 7 Documentation (V8.1) Options for Accessing Documentation 1. Documentation for the Planning Phase 2
Options for Accessing Documentation 1 Documentation for the Planning Phase 2 SIMATIC Process Control System PCS 7 Documentation for the Realization Phase 3 Documentation on commissioning, operation, diagnostics
More informationSITOP power supply. Selectivity modules. Overview. Safety notes. Description, device design, dimension drawing. Mounting/removal 3
Overview Safety notes 1 SITOP power supply Manual Description, device design, dimension drawing 2 Mounting/removal 3 Mounting position, mounting clearances 4 Installation 5 Technical data 6 Safety, approvals,
More informationSIMATIC. ET 200S distributed I/O. 4 IQ-SENSE module (6ES7138-4GA00-0AB0) Preface. 4 IQ-SENSE module (6ES7138-4GA00-0AB0) Parameters 2.
SIMATIC ET 200S distributed I/O SIMATIC ET 200S distributed I/O 4 IQ-SENSE module (6ES7138-4GA00-0AB0) Manual Preface 4 IQ-SENSE module (6ES7138-4GA00-0AB0) 1 Parameters 2 Diagnostics 3 Control interface
More informationKey Panels Library SIMATIC HMI. Key Panels Library. Preface 1. Installation of Key Panels Library. Working with the Key Panels Library
Preface 1 Installation of Key Panels Library 2 SIMATIC HMI Working with the Key Panels Library 3 Function description 4 Configuration Manual 11/2011 A5E03740571-01 Legal information Legal information Warning
More informationhttps://support.industry.siemens.com/cs/ww/de/view/
SIMATIC PCS 7 Standard Architectures SIMATIC PCS 7 V9.0 https://support.industry.siemens.com/cs/ww/de/view/109751791 Siemens Industry Online Support Legal Information Warning notice system This manual
More informationSIMATIC. Communications processor CP 340 first commissioning steps. Getting Started 04/2005 A5E
SIMATIC Communications processor Getting Started 04/2005 A5E00442606-01 Safety Guidelines This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
More informationOperator Station (V8.0) SIMATIC. Process Control System PCS 7 Operator Station (V8.0) Preface 1. The PCS 7 Operator Station
SIMATIC Process Control System PCS 7 Configuration Manual Preface 1 The PCS 7 Operator Station 2 Introduction to OS configuration 3 Setting languages 4 Configuring OS data in SIMATIC Manager 5 Configuring
More informationSINAMICS G130. Voltage Sensing Module 10 (VSM10) Operating instructions 03/2011 SINAMICS
SINAMICS G130 Operating instructions 03/2011 SINAMICS s Safety information 1 General 2 SINAMICS SINAMICS G130 Voltage Sensing Module 10 (VSM10) Mechanical installation 3 Electrical installation 4 Technical
More informationSIMATIC. Automation system Fail-safe signal modules. Preface. Product overview 1. Configuration options 2. Configuration and parameter assignment
SIMATIC Automation system SIMATIC Automation system Installation and Operating Manual The following supplement is part of this documentation: No. Product Information Drawing number Edition 1 SM 336; F-AI
More informationSINAMICS G130. Terminal Module 150 (TM150) Operating Instructions 03/2013 SINAMICS
SINAMICS G130 Operating Instructions 03/2013 SINAMICS s Safety information 1 General information 2 SINAMICS SINAMICS G130 Mechanical installation 3 Electrical installation 4 Technical specifications 5
More informationConfiguration limits for products of the HARDNET-PB DP-Base 1
Configuration limits for products of the SIMATIC NET PC Software HARDNET-PB DP-Base 1 V8.2 software Communications partners and configuration limits for Configuration limits SOFTNET-PB DP 2 SIMATIC NET
More informationProcess I/Os 6/1. Siemens PLT
8/2 Introduction 8/3 Connecting TELEPERM M I/Os 8/4 Connecting SIMATIC I/Os 8/6 DP extensions for AS 488/TM 8/7 ET 200M packaging system 8/9 ET 200M modules 8/11 ET 200M Ex I/O modules 8/12 Function and
More informationSIMATIC. Process Control System PCS 7 Trend Micro OfficeScan (V8.0; V8.0 SP1) Configuration. Using virus scanners 1.
SIMATIC Process Control System PCS 7 Using virus scanners 1 Configuration 2 SIMATIC Process Control System PCS 7 Trend Micro OfficeScan (V8.0; V8.0 SP1) Configuration Commissioning Manual 08/2009 A5E02634982-01
More informationGeneral Information 1. Connection 2. User Interface 3 ATC5300. Menus 4. Automatic Transfer Controller. Remote Control Software Manual A5E
s General Information 1 Connection 2 Automatic Transfer Controller User Interface 3 Menus 4 Remote Control Software Manual Edition 01/2010 A5E02469028-01 Legal information Warning notice system This manual
More informationSIMATIC. WinCC Readme Runtime Professional. Validity 1. Improvements in Update 2 2. Improvements in Update 1 3
Validity 1 Improvements in Update 2 2 SIMATIC WinCC Improvements in Update 1 3 Performance features of Runtime Professional 4 Readme 03/2017 Legal information Warning notice system This manual contains
More informationPROFIsafe SITRANS. Pressure transmitter SITRANS P, DS III PROFIsafe series. Product Information 7MF4*34 04/2008 A5E
1 SITRANS Pressure transmitter SITRANS P, DS III PROFIsafe series Product Information 7MF4*34 04/2008 A5E00732533-02 Safety Guidelines This manual contains notices you have to observe in order to ensure
More informationClass: DocumentManager 1 COMOS. Platform Class documentation DocumentManager_dll. Programming Manual 03/2017 V10.2.
Class: DocumentManager 1 COMOS Platform Class documentation DocumentManager_dll Programming Manual 03/2017 V10.2.1 A5E39863290-AA Legal information Warning notice system This manual contains notices you
More informationSIMATIC. ET 200SP BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) Preface. Guide to the documentation. New properties. Product overview 3
Preface Guide to the documentation 1 SIMATIC ET 200SP BaseUnits (6ES7193-6BP.../3RK1908-0AP00 ) Manual New properties 2 Product overview 3 BaseUnits for I/O modules 4 BaseUnits for motor starters 5 Potential
More informationSIMATIC. Distributed I/O ET 200iSP. Preface. Product overview 1. Commissioning guideline 2. Configuration options 3. Installing 4.
Preface Product overview 1 SIMATIC Distributed I/O Operating Instructions Commissioning guideline 2 Configuration options 3 Installing 4 Wiring 5 Commissioning and Diagnostics 6 Maintenance 7 General technical
More informationET 200iSP SIMATIC. Distributed I/O ET 200iSP. Preface. Product overview. Commissioning guideline 2. Configuration options 3. Installing.
Preface Product overview 1 SIMATIC Distributed I/O Operating Instructions Commissioning guideline 2 Configuration options 3 Installing 4 Wiring 5 Commissioning and Diagnostics 6 Maintenance 7 General technical
More informationSINAMICS G130. Voltage Sensing Module 10 (VSM10) Operating Instructions 05/2010 SINAMICS
SINAMICS G130 Operating Instructions 05/2010 SINAMICS s Safety information 1 General 2 SINAMICS SINAMICS G130 Voltage Sensing Module 10 (VSM10) Mechanical installation 3 Electrical installation 4 Technical
More informationPD PA AP How To Configure Maxum II TimeServer Access
Designating the TimeServer on the Analyzer 1 Running a TimeServer as an Application 2 Allowing the TimeServer Application Through the Firewall 3 PD PA AP How To Configure Maxum II TimeServer Access Application
More informationPN/CAN LINK Configuring the "CANopen manager" and "CANopen slave" operating modes TIA Portal V14, SIMATIC S7 https://support.industry.siemens.com/cs/ww/en/view/109751077 Siemens Industry Online Support
More informationIndustrial Controls. Motor management and control devices SIMOCODE pro. Introduction 1. Configuring a reversing starter. List of abbreviations
Introduction 1 Configuring a reversing starter 2 Industrial Controls A List of abbreviations Motor management and control devices Getting Started 05/2018 A5E40507294002A/RS-AB/002 Legal information Warning
More informationSIMATIC. Distributed I/O ET 200iSP Distributed I/O - Failsafe Module. Preface. Product Overview 1. Configuration and parameter assignment 2
Preface Product Overview 1 SIMATIC Distributed I/O ET 200iSP Distributed I/O - Failsafe Module Operating Instructions Configuration and parameter assignment 2 Addressing and installation 3 Wiring and fitting
More informationSIMATIC S7-200 PRICE LIST
BẢNG GIÁ PLC SIEMENS S7-200 SIMATIC S7-200 PRICE LIST Part number SIMATIC S7-200 CLASSIC (GERMANY ORIGIN) SIMATIC S7-200 Central Processing Unit 6ES7211-0AA23-0XB0 6ES7211-0BA23-0XB0 6ES7212-1AB23-0XB0
More information