SC600W WIFI IP HIDDEN CAMERA

Transcription

1 USER MANUAL SC600W WIFI IP HIDDEN CAMERA

2 1 YEAR WARRANTY All RecorderGear brand products are backed by our 1 Year Warranty. For full details visit This Device is Compliant with USA Surveillance Laws In order to comply with 18 U.S. Code 2512 federal law (USA), the audio recording function has been removed from this device. Please be familiar with your country and state surveillance laws before using this product. RecorderGear will not be held liable for any illegal use of this product. MID: AI-IP80 MADE IN CHINA

3 MULTIPLE HIDDEN CAMERAS. MULTIPLE LOCATIONS. ONE APP.

4 4

5 Table Of Contents Section & Title Page # 1 Charging 6 2 Insert/Eject Micro SD Card 7 3 Power On/Off 8 4 Record In Continuous/Motion Detection 8 5 Access Saved Recordings 10 6 Download The RecorderGear APP 11 7 Set-up Wi-Fi IP Camera Function 11 8 Understanding The RecorderGear APP 17 9 Live Stream Screen Settings Device Settings Menu Device Settings Troubleshooting Clock Set-up/Function FM Radio Specs 34 5

6 1 Charging The SC600W operates off wall power or batteries. If using batteries, we recommend fully charging the SC600W before your first use. It takes approximately 7.5 hrs to charge. 1. Charging The SC600W A. Open the back of the SC600W by sliding the cover. Remove the paper tab in between the battery. B. Using the included mini USB cable, plug the SC600W into a computer USB port or a USB wall adapter. C. The charging indicator light on the back of the SC600W will light up red to indicate it is charging (the light is under the back cover). NOTE: To operate the SC600W using wall power (instead of batteries), just plug it in as if you were charging it. 6

7 2 Insert/Eject Micro SD Card The SC600W supports up to a 128GB micro SD card. The purpose of the SD card is to store the bulk of your surveillance footage. Without an SD card, you can still live stream video, get motion activated alerts, & record video clips to your ios/android device using the App (see section 6). 1. Insert A Micro SD Card A. Open the back of the SC600W by sliding the cover. Insert a micro SD card into the card slot. We recommend a class 10 card. B. You will feel a click when the micro SD card has been inserted correctly. 2. Remove The Micro SD card A. Push the card in until you feel a spring release & the card will eject when you let go. 7

8 3 Power On/Off A. Power On - Make sure a micro SD card is inserted & slide the power switch to the ON position (located under the back cover). B. Power Off - Slide the power switch to OFF 4 Record In Continuous/ Motion Detection The SC600W can record in either continuous or motion activation. The default mode is continuous; it will automatically start recording in this mode when it is initially powered on. If you set it to motion activation, it will run in this mode the next time you power it on. 1. Continuous Recording A. Make sure a micro SD card is inserted & slide the power switch to the ON position. B. The front indicator light will show blue for 5 seconds & then turn OFF. After 15 seconds, the light will turn back on for 20 seconds & turn back OFF for 10 seconds. After the 10 8

9 seconds, it will begin flashing. C. Once the blue light begins flashing continuously, recording has begun. NOTE: When the SC600W is connected as a Wi-Fi IP camera, the front indicator light will no longer flash, but be a solid blue light. To turn off the indicator light, see section 9-2D. 2. Motion Detection Recording Before changing to motion detection mode, download & connect the camera to the RecorderGear App (See sections 6-8). A. After completing sections 6-8 open the RecorderGear App. B. Press the Camera Settings icon to the right of the camera on the Live Video/Main Page & select Device Settings. C. Select Recording Settings & tap Record. D. Select Motion Detection E. Select OK to save the settings. F. Select Alarm Settings & change the Motion Detection Sensitivity to adjust it. NOTE: Make sure you change the Motion 9

10 10 Detection Settings in the Alarm Settings. If it s DISABLED, your camera will NOT record in motion detection. (See section 11-1A) 3. Stop Video Recording Slide the power switch to the OFF position. NOTE: The default video file interval length is 3 minutes. To change this, see section 11-3D 5 Access Saved Recordings There are two methods to access saved recordings 1. Remove The SD Card A. Slide the power switch to OFF & remove the SD card. B. Insert the SD card into a card reader & insert it into your PC. C. Open the disk that appears on your PC. NOTE: We recommend using VLC media player to playback your files. 2. Use The RecorderGear App (See section 8-3)

11 6 Download The RecorderGear APP A. Visit the App Store for ios devices or Google Play Store for Android devices. B. Search for RecorderGear. C. Download & install the APP on your ios/ Android device. SEARCH FOR RecorderGear 7 Set-up Wi-Fi IP Camera Function The first step in getting the SC600W to function as a Wi-Fi IP camera, is to connect your ios/android device to the SC600W s Wi-Fi signal. Then use the RecorderGear APP to connect the SC600W to your home/ business Wi-Fi network (see section 7-2) 11

12 1. Connect Your ios/android Device To The SC600W s Wi-Fi Signal A. Download & install the RecorderGear APP on your ios/android device. (See section 6) B. Turn ON the SC600W. C. Allow 2 minutes for your SC600W to set up & transmit a Wi-Fi signal. D. Locate the camera UID on the QR code sticker of your SC600W. (Located on the back of the device under the cover) NOTE: The UID & QR code is unique to your device. 12

13 E. Open the Wi-Fi Settings of your ios/ Android device, then select the camera s UID (on QR code sticker) from the Wi-Fi list. F. Open the RecorderGear APP & tap Search (upper right corner); you should see the SC600W s UID, tap to connect to it & then it will be added to your camera list. NOTE: If the SC600W s UID doesn t show up in the search, add the camera manually by tapping Add Camera (upper right corner). Next, tap the Add New Camera Manually; 13

14 then, tap QR Scan to use your phone to scan the QR code. After scanning tap OK. 14 G. On the Live Video/Main Page, select the camera from your list. You will be asked to change your password. Select Change & input a new password. Default password is H. Start viewing the live video feed by selecting the camera on the Live Video/ Main Page. NOTE: At this point, you can only operate the APP within range of the SC600W s Wi-Fi signal. For full Wi-Fi IP camera functionality, complete the next section 7-2.

15 2. Connect SC600W To Home/ Business Wi-Fi A. Make sure you have completed section 7-1 before proceeding. B. Tap the Camera Settings icon to the right of the camera on the Live Video/Main Page & select Device Settings. C. Tap Wi-Fi Settings & select your Home/ Business Wi-Fi name. Enter your Home/ Business Wi-Fi password as prompted. D. Tap OK to accept the connection. E. Confirm you want to connect the SC600W to the Wi-Fi, by tapping OK. F. It will then say Device Reset, tap OK. 15

16 G. Completely close out of the RecorderGear APP & wait for 40 seconds. H. Open the RecorderGear APP, the camera status will say on-line. I. You can now change the SC600W s settings & remotely view a live video stream, from anywhere in the world. NOTE: When the SC600W is connected as a Wi-Fi IP camera, the front indicator light will no longer flash, but be a solid blue light. To turn off the indicator light, see section 9-2D. 16

17 8 Understanding The RecorderGear APP This section will help you understand& the functions of the RecorderGear APP. 17

18 1. Live Video Page/Main Page This page shows all cameras & statuses. A. Add Camera - This allows you to add a new camera. (See section 7-1F) B. Search - This adds a camera to the Live Video/Main page. (See section 7-1F) C. Camera Settings - Select this icon to modify, delete, reconnect, & access the device settings. (See section 10) D. Live Video/Main Page - This page shows all cameras & their status. E. Grid-view Page - Tap this icon to watch & stream up to 4 cameras at once. 2. Photo Media Page 18 This page contains all photos taken on the Live Stream Video Page (See Section 9). Press & hold pictures for more options.

19 These options include: A. Save to Album - Save snapshots/photos to your phone s photos APP. B. Share - Share snapshots/photos to social media or save to your phones photos APP. C. Delete Snapshot - Delete a specific snapshot/photo. D. Delete All - Delete all the photos that have been taken through the APP. 3. Recording Media Page This page contains recordings taken in the APP & files on the micro SD card. 19

20 20 A. On App Recordings - Tap this icon to view files that have been recorded through the APP. B. Micro SD Card Recordings - Shows footage contained on the micro SD card. To download video files to the APP, first, select your desired camera. Next, press & hold the file you would like to download. Tap download & it will begin downloading. C. Downloading Micro SD Card Footage - This is where files go while they are being downloaded

21 D. Downloaded Micro SD Card Footage - Contains video footage downloaded from the micro SD card. Press & hold a file to share or save to your phones photos APP. NOTE: ALL footage is saved to the micro SD Card. However, footage recorded by pressing the Record Icon on the video stream page (see section 9) are saved to directly to the APP and also the micro SD card 4. Alert Screen-shots Page This page contains motion detection alarms/ notifications. Press & hold an Alert Screenshot to see more options. 9 Live Stream Screen Settings 1. Watching Live Video In The APP A. On the Live Video/Main Screen tap the camera you would like to view. B. The camera s live video feed will appear. 21

22 22 2. Live Video Stream Settings NOTE: To rotate the camera lens (330 ), swipe your finger left/right on the live video stream. A. Brightness - Tap & use the slider to adjust the video brightness. This change effects footage recorded to the APP & microsd card. B. Contrast - Tap & use the slider to adjust video contrast. This change effects footage recorded to the APP & microsd card

23 C. Infrared Night Vision - Turns night vision on/off (if your camera supports it) D. Indicator Light On/Off - Tap to turn on/ off the indicator light, allowing for more discreet monitoring. E. Photo - Tap to take a video screen-shot. F. Video (Record) - Tap to start recording & tap again to stop (video is recorded to the APP & micro SD card). H. Flip Up/Down - Tap to flip the video view Up/Down. This change effects footage recorded to the APP & microsd card. I. Flip Left/Right - Tap to flip the view Left/ Right. This change effects footage recorded to the APP & microsd card. J. Resolution - Tap to change the resolution of the Live Video Stream (The resolution ranges from 1080p to 480p). This will NOT change the resolution of footage recorded to the micro SD card. K. Back - Tap this icon to go back to the Live Video/Main Page. 23

24 3. Rotating The Lens & Pinch To Zoom A. Rotating The Camera Lens - The camera lens can rotate left/right up to 330. To rotate the lens, swipe left or right on the live video stream. B. Pinch To Zoom - You are able to pinch to zoom on the live video stream. 24

25 10 Device Settings Menu Select the Camera Settings icon next to the camera you want to modify (on the Live Video/Main Page ) A. Modify Device - Edit the screen name/ label of the camera. B. Delete Device - Delete the camera from the camera list. C. Reconnect - Do this if camera is off-line. D. Device Settings - Access all the settings of your camera. (See section 1) 25

26 26 11 Device Settings

27 1. Alarm Settings A. Motion Detection Sensitivity - Change motion detection sensitivity range from 1 to 7 or disable it. B. Alarm Schedule - Set times for when your camera takes motion activated alert screenshots. NOTE: If Motion Detection Sensitivity is disabled this function will not work. C. Alert - Enable/Disable alerts. D. FTP Upload - Enable/Disable FTP uploads. E. Alarm Intervals - Set intervals in which it will detect motion & capture alert screenshots. F. Alert Notifications - Enable/Disable the notifications that pop up on your phone. G. Live Feed Time/Date Stamp - Enable/ Disable the time/date stamp of the Live Video Stream Page. 2. Wi-Fi Settings Allows you to link your camera to your home/business Wi-Fi. (See section 7-2) 27

28 28 3. Recording Settings A. SD Card Recording - Shows space left on the micro SD card & lets you know if the camera is recording to the micro SD card. B. Record Select Motion Detection for recording to begin only when motion is detected Select Continuous Recording for your camera to record until told otherwise Select Scheduled Recording for the camera to record only at certain times of the day. Select Stop Recording your camera will stop & not record any files to the micro SD Card (live video stream is still viewable) Tap OK to save changes. C. Resolution - High = 720P, Medium = 480P, Low = 280P. (This changes the resolution recorded to the micro SD card) D. Recording Segments (mins) - Footage is divided into separate files to avoid large file size. Here you specify the file interval length. Select OK to save changes. (1-20 mins) E. Loop Recording - Enable/Disable loop recording, select OK to save changes. 4. Infrared Settings If your camera supports infrared night vision,

29 you can set specific times it will enable/ disable here. 5. Time Settings Set the current time, time mode, time zone & time server by selecting this option. Select the Sync With App Time, select OK to save. 6. Alert Settings Here you can input your address for alerts. Select OK to save changes. 7. FTP Settings Contact your local IT specialist for more information & help (FTP not applicable for most users). 8. Change Password Changes the password for your camera. Enter the current password & then the new password. Confirm the new password & select OK to save. 9. Device Reset Select this option to reset your camera to the factory settings. 29

30 12 Troubleshooting If your camera is not working as described, try resetting, rebooting, or reconnecting it. 1. Video Streaming Issue Try reconnecting your camera. To do this, see section 10C. If this doesn t work, close & open the APP. 2. Wi-Fi Signal Issue If you can t find or connect to the Wi-Fi signal of the camera, reset it by pressing & holding the reset button on the camera for about 10 seconds while the device is on. 3. Reset The Device This can solve many problems. Press & hold the reset button for 10 seconds while the camera is powered ON. The camera password will set back to NOTE: After resetting the camera, it sets back to the manufacturer defaults. You will need to reconnect your camera (see section 7). 30

31 13 Clock Set-up/ Function 1. Set The Time & Date On Clock A. Press the set button once. B. The hour number will begin flashing. C. Press the forward or back button to change the hours or setting you are on. D. Press the set button to move to the next setting. NOTE: When the day setting flashes, you are changing the language the day is in. GE = German EN = English NE = Dutch FR = French IT = Italian ES = Spanish DA = Danish 2. Alarm Set A. Press & hold the alarm button. B. The hour number will begin flashing. 31

32 C. Press the forward or back button to change the hours or minutes. D. Use the alarm button to move on to the minutes. E. A leaf shape will be displayed above the colon of the time indicating the alarm has been activated. 3. Change between Max & Min Humidity & Temperature Press the Max/Min Button to toggle between the max & min. 4. Change the Temperature between the Fahrenheit & Celsius Press the Temperature button to toggle between Fahrenheit & Celsius. 5. Back-light Brightness Press light button to adjust the back-light brightness. 32

33 14 FM Radio 1. Turn on FM Radio A. Make sure camera mode is turned OFF. B. Press & hold the SET button until radio turns ON. 2. Tune Radio Press forward,, or back arrow,. 3. Scan Radio Press & hold forward button,, or back arrow button,. 4. Change Volume Press up, VOL+ or down, VOL-. 5. Save Channels A. Press & hold the SAVE button when you are on the channel of your choice. B. To change the save station, press the SAVE button once; then use the forward & back button to go between your chosen save stations. 33

34 Battery Life Video Resolution on App Video Resolution on micro SD card Video Recording modes Video File type Loop Recording Time & Date Stamp 15 Specs 6 Hours 1080P, 640P, 480P 720P, 480P, 240P Continuous, Motion Detection AVI Yes Yes Lens Angle 90 FM radio IP / Wi-Fi Memory Support Battery Size Records While Charging Video Size Storage Rotating Lens Weight (Ounces) Yes Yes 128GB 3000 mah Yes 720P mins per GB 480P mins per GB 240p mins per GB 330 Degrees 14.1 oz Dimensions (Inches) 6.6 X 2.3 x

35 35

36 RecorderGear and respective logos are trademarks of Teton Webstores LLC 2018 ALL RIGHTS RESERVED