North America Sales & Service

Transcription

1 IP Camera User s Manual The IP camera is a specification embedded in the VETPEL PRO PLUS.ICU (UX-U900) model. The IP camera model provided may be changed without prior notice to improve performance. If you want to use the IP camera, wireless internet (WiFi) must be installed in the space where the machine is installed. Before Use - Your router supports the 2.4GHz frequency band (802.11b/g/n). - Your router DHCP is enabled. - Your smartphone is connected to the Internet with a WLAN/Wi-Fi that the camera will connect with. - You know the WLAN/Wi-Fi password.( No special characters in the password and Wi-Fi SSID such - Search Sricam on Google Play or ios App Store / Scan the QR code to download the Sricam App.

2 How to use Input Input or App account Input or App account Keep password Keep password Login Login Forgot Password? Forgot Password? 1-1) Run after installation and press the button. 1-2) After entering the ID and password, press the button to complete the subscription. 1-3) An account number is created. Please log in with the App account or and password you used to join. 2) Change the IP CAMERA item to ON in the setting screen of the VETPEL main unit. [Default: OFF] Devices List Add new device Input device ID IPCam (default : ) 3-1) Press the Add New Device button 3-2) the IP camera device ID(number) is indicated on the sticker attached to the controller on the front of the device. It is the unique ID for each camera. Please enter your ID. 3-3) The initial value for the device password is Enter the value and then press the button.

3 IPCam Device offline, please choose camera netwok connection mode. Smart Wi-Fi AP Hotspot Your device is offline. Please check the device s network connection Step 1, Power on the device(ip camera) Step 2, Connect the device to network: 1. If device with RJ-45 LAN port, connect device with your router or switch with a net-cable, wait about 30 seconds, tap to re-add device 2. If device without RJ-45 LAN port, tap Smart Wi-Fi Setting to add the device Wi-Fi name Input Wi-Fi password Smart Wi-Fi Setting 3-4) Tap smart Wi-Fi If you connect automatically, skip to step 3-7. If you do not hear a beep at this stage, you will need to reset the IP camera. [See how to reset 5P] Connection is no possible if there are too many devices sharing the same Internet network or if they are far away from the wireless router. 3-5) Tap smart Wi-Fi 3-6) Enter your Wi-Fi password after checking Wi-Fi names nearby. If the password is not set, enter the space bar in blank and press the button. If the manual connection does not work, you must connect WiFi signal in your phone, not 4G or 5G. Change Admin Password WI-FI setting succeed Input old admin password Input new admin password Skip Change Password Reinput new admin password Modify Configuring Wi-Fi..., Please wait ) The screen you are connecting to Wi-Fi appears If you do not go to steps 3-8, skip to step ) You can change your password. If you do not want to change it, go to step ) Enter a new password with a number between 3 and 9 characters. Special characters are not allowed.

4 8: 30 Divices List Hospital Add new device IP Camera 8: 30 WI-FI setting failed Network busy! Please try again. First, please confirm whether the device make beeping sound. If not beeping, you need back to the first step of Add New Device? If you heard continuous beeping sound, check whether input incorrect Wifi password, and try again. Press Reset button with the Reset pin for 10 seconds untill hear a clash sound from the device, then input Wi-Fi password and tap Wi-Fi name Input Wi-Fi password If this setting failed several times, please try QR Code Setting to cinfigure Wifi Try Again 3-10) Camera connected. Press and hold the camera window to display additional menu. Pressing the button shows the menu for right setting, logging out, and exiting etc. QR Code Setting 4-1) If the connection is not smooth due to a problem in the Internet network, the above screen appears. Please press QR code setting. 4-2) Enter your Wi-Fi password and press the button. QR Code Setting IP Camera <When looking at the top of the inside> Move camera back and forth slowly scan the QR code above at the distance about 20~30cm, after hear a beeping sound, tap 4-3) The QR code appears on the screen. Bring your smartphone to the camera lens inside the Vetpel at a distance of 20 ~ 30cm and move it forward a little bit. When you hear the Ding~ sound from the camera press the button, and your device is now connected to Wi-Fi. When you scan the QR code to the camera, make sure the direction is slightly different so that the scan is smooth. <Please let the camera recognize the QR code screen.>

5 1 Local record 2 Screenshots 3 Resolution 4 Speaker 5 Upside down 6 Screen lock 7 Setting If you want to connect your IP camera to a different Wi-Fi than the Wi-Fi you have entered, please delete the device from the application and reset and setting the camera. How to reset IP camera (Unlock the upper surface maintenance part) If you want to return the setting value, etc. to the factory condition, you can reset it in the machine maintenance part. Press the power button to turn off the power and disconnect the power cord from the outlet. Be sure to disconnect the power cord of the machine from the power outlet. Turn both locking levers on the top side of the machine by 90 degrees using the rear side of the wrench included in the product. The maintenance part is unlocked. Locked Unlocked You can reset the IP camera after lifting the top cover to remove it. When you look at the maintenance part from the top, the part shown in the upper left, figure is the IP camera. Press the reset button for 3 to 5 seconds using a pointed object such as a ballpoint pen in the reset groove on the back of the camera. If you hear a beep, the reset is complete. When replacement is complete, reassemble in the reverse order of removal.