Energy Management Solutions
|
|
- Scott Watts
- 5 years ago
- Views:
Transcription
1 Energy Management Solutions
2 Power Generation and Transmission Facilities You can provide solution in your Power transmission project with Klea Energy Analyser and Systemon Software Shopping Malls and Chain MarketsIndustrial Zones With ETOR Gateway and Systemon software, you can read and invoice electric, naturel gas and water meters as a submetering application automatically. With Rapidus, you can always keep your facility s reactive energy under control and never pay unexpected penalties. With Klea and Ecras you can monitor, save and analyze energy consumptions. You can make saving decisions. Factories With Rapidus you can monitor your reactive energy remotely and you do not make unnecessary service and never pay unexpected penalties. With Klea and Ecras you can monitor, save and analyze energy consumptions. You can save expenses and decrease your carbon emission. Power Distribution Facilities You can monitor, record and analyze your energy parameters and quality. You can minimize loss and leakage in your system. With Rapidus you can keep your reactive energy consumption under control and you can monitor all energy parameters with its advanced power measurement features.
3 KLEA Energy Analyzer
4 Moduler design No connector cables No fixing screws State of the art technology Easy mounting on panels connection to system
5 Data Collection Platform All forms of energy can be collected by one KLEA. Digital I/O is standart in KLEA. Plus 5 I/O is optional. User can collect data from gas, water and/or pressure meters. Production quantity can be collected by a limit switch or a dry contact coming from a proximity sensor. User can calculate total consumption of all forms of energy and calculate energy cost per product. Water Meter Gas Meter Quantity Counting KLEA Distribution Panel MOBDUS TCP/IP ETOR Dual Source Energy Measurement Generators produces much more expensive energy compared to utility supply. Klea has generator input and it is activated once generator is on. Users can set Tariff to measure genset usage as a power supply and this brings users to identify the exact cost of the energy. Utility Genset KLEA TCP/IP LOAD ETOR NETWORK MOBDUS RS 485
6 T 13 7 T 11 T MultiTariff Energy Measurement In addition to Tariff, Tariff 1 is splitted into three with adjustable start & end times for each subtariff. User can use these subtariffs in order to measure energy consumption for different shifts in a facility. Tariff 11, 1 and 13 values are also saved in nonvolatile memory. User can read these values from the screen remotely Modbus communication. Demand Management User can adjust demand period between 1 to 60 minutes. Klea keeps demand for I, P,Q, and, S for each phase. Klea monitors P, Q, S and I values and gets the average values of 4 parameters for each demand period. Klea logs the maximum value of the average values in a month. Klea keeps 4 months demand logs for 4 parameters with time stamp. P, Q, S and I values are measured for each phase and sum. Data Logging Klea measures Klea logs Klea logs Klea logs 1 MB Memory 68 different energy parameters. 80 days hourly 40 days daily 36 months monthly real time measurements of 68 parameters. 4 months demand values. 50 recent alarms with time stamp.
7 5 A 100 A 1 sec. Surge Withstand 100 A/1 sec Klea current inputs can withstand surges upto 100 A for 1 second. In medium voltage applications, current transformers may generate peak currents in secondary windings. These peak values may reach upto 100 A and as a result of this current inputs of the analyzer may burn out and create an open circuit for secondary connections of the CT. This may result with an explosion on CT since secondary side is open circuited. Signal Waveform Monitoring Klea s high sampling rate enables the user to monitor a real time signal waveform. Klea s sampling rate per period is 51. User can monitor the effects of harmonics on the system from this screen. Programmable Analog Outputs Klea can be used as an energy transducer in substation automation projects. Some models have either or 4 programmable analog outputs and user can set any measured parameter to be disclosed with any of the output channel.
8 Accuracy Class (0,s) Function Symbol Function Function Performance Class According to IEC Measuring Range Other Complementary Characteristics P Total active power 0, 10 % I b I I max 0,5 Ind to 0,8 Cap Q V Total reactive power 1 5 % I b I I max 0,5 Ind to 0,5 Cap S A Total apparent power 0, 10 % I b I I max 0,5 Ind to 0,8 Cap E A Total active energy 0, 0 to IEC 6053 Class 0.S E RV Total reactive energy 0 to IEC Class f Frequency 0, Hz I Phase current 0, 0 % I b I I max I Nc Neutral current 0,5 0 % I b I I max U Voltage 0, U min U U max P FA Power factor 0,5 0,5 Ind to 0,8 Cap THDV Total harmonic distortion voltage 1 0 % to 0 % THDI Total harmonic distortion current 1 0 % to 100 % Other Features Graphical LCD Language Support Harmonics Measurement upto 51 Advanced Alarm Settings Real Time Clock
9 General Graphical LCD 6 buttons Password Protection Supply Voltage AC Supply Voltage DC Current Transformer Ratio Voltage Transformer Ratio Connection Type Measurement in Quadrants Networks Accuracy Class Voltage Accuracy Class Current Accuracy Class Active Energy Number of Measurement in a period Power Consumption Power Quality Measurements Harmonics / current and voltage THDVoltage in % THDCurrent in % Phasor Diagram Data Logging Average, Minimum, Maximum Values Alarms Time Stamp Demand Voltage Measurement Input Overvoltage Category Measured Range LN Measured Range LL Measured Frequency Range Power Consumption Sampling Freq.between 4565 Hz Current Measurement Input Rated Current Measurement Range Overvoltage Category Measurement Surge Voltage Power Consumption Peak current for 1 sec Sampling Freq.between 4565 Hz Input Outputs Relay Outputs Max. Switching Current Max. Switching Voltage Max. Switching Power Digital Inputs Minimum Counting Frequency Input Present or Not Digital Outputs Switching Voltage Range Minimum Switching Frequency Isolation Level Analog Outputs Range of Outputs 05 V, 010 V, 55 V, 1010V, 00 ma, 40 ma Isolation Mechanical Properties Weight Protection Class Assembly Type Dimensions Cable Cross Sections Supply Voltage, Current, Relay Outputs Stranded: Solid: Digital I/O, RS 485 Ambient Conditions Operating Temperature Storage Temperature Relative Humidity (no condensation) Communication and Others Modbus RTU Battery Real Time Clock Standarts in Compliance Safety requirements for electrical equipment for measurement, control, and laboratory use Stranded: Solid: KLEA 30P V AC V DC A A 3P4W, 3P3W Aron 4 TT, TN, IT < 3VA Upto 51st 1300 Vrms 500 Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 10 A 50 VAC 150 VA 100 Hz, 10 ms Dry Contact 530 VDC 0 Hz, 50 ms 3750 Vrms 0 0,404 kg IP 40 front, IP 0 rear Panel Mount W96xH96xD7,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG 1,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT II acc. to IEC KLEA 370P V AC V DC A A 3P4W, 3P3W Aron 4 TT, TN, IT < 3VA Upto 51st 1300 Vrms 500 Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 10 A 50 VAC 150 VA Hz, 10 ms Dry Contact VDC 0 Hz, 50 ms 3750 Vrms 0 0,48 kg IP 40 front, IP 0 rear Panel Mount W96xH96xD7,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG 1,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT II acc. to IEC KLEA 3P V AC V DC A A 3P4W, 3P3W Aron 4 TT, TN, IT < 3VA Upto 51st 1300 Vrms 500 Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 10 A 50 VAC 150 VA 100 Hz, 10 ms Dry Contact 530 VDC 0 Hz, 50 ms 3750 Vrms Isolated 0,48 kg IP 40 front, IP 0 rear Panel Mount W96xH96xD7,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG 1,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT II acc. to IEC KLEA 34P V AC V DC A A 3P4W, 3P3W Aron 4 TT, TN, IT < 3VA Upto 51st 1300 Vrms 500 Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 10 A 50 VAC 150 VA 100 Hz, 10 ms Dry Contact 530 VDC 0 Hz, 50 ms 3750 Vrms 4 Nonisolated 0,48 kg IP 40 front, IP 0 rear Panel Mount W96xH96xD7,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG 1,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT II acc. to IEC EMC Electrostatic discharge immunity test EMC Radiated, radiofrequency, electromagnetic field immunity test EN EN EN EN EN EN EN EN EMC Electrical fast transient/burst immunity test EMC Surge immunity test EMC Immunity to conducted disturbances, induced by radiofrequency fields EMC Power frequency magnetic field immunity test EMC Voltage dips, short interruptions and voltage variations immunity tests Industrial, scientific and medical equipment Radiofrequency disturbance characteristics Limits and methods of measurement EN EN EN EN EN EN 55011/A1:010 EN EN EN EN EN EN 55011/A1:010 EN EN EN EN EN EN 55011/A1:010 EN EN EN EN EN EN 55011/A1:010
10 Dimensions (mm) Wiring Diagrams 3 Phase Connection With Neutral (3P4W) 3 Phase Connection No Neutral (3P3W) 3 Phase No Neutral Aron Connection
11 Ecras Electronic Multimeter
12 Moduler design No connector cables No fixing screws State of the art technology Easy mounting on panels connection to system
13 Instanteneous Measurement Each phase VLN and its averages. Each phase VLL and its averages. Each phase I and its sum. Neutral Current Each phase active power(p) and its sum. Each phase reactive power(q) and its sum. Each phase apparent power(s) and its sum. Each phase power factor(pf) and its average. Frequency Data Logging Ecras measures 30 different energy parameters. Ecras logs min and max values of the measured parameters Ecras logs demand values for I, Q, P and S. Alarms Low limit, High Limit, Hysterysis and Delay Values can be set from the Alarm Menu for the below parameters: VLN, V LL, I, IN, PF and F Phase sequence Absence of Voltage and Current Can be detected by Ecras and indicates each alarm by blinking leds on its front panel. User can activate two output relays by assigning them individually to any alarm. Surge Withstand 100 A/1 sec 5 A 100 A 1 sec. Ecras current inputs can withstand surges upto 100 A for 1 second. In case of a current rise in the secondary winding of the current transformer, current inputs of the multimeter should withstand to these peak values. If not, current transformer may explode due to open circuit in the secondary winding. This may result with shutdown of the measurement system.
14 Ecras Product Selection Chart General Seven Segment Display 4 buttons Password Protection Supply Voltage AC Supply Voltage DC Current Transformer Ratio Voltage Transformer Ratio Connection Type Measurement in Quadrants Networks Accuracy Class Voltage Accuracy Class Current Accuracy Class Active Energy Number of Measurement in a period Measurement Accuracy Power Consumption Power Quality Measurements Harmonics / current and voltage THDVoltage in % THDCurrent in % Phasor Diagram Data Logging Average, Minimum, Maximum Values Alarms Time Stamp Demand Voltage Measurement Input Overvoltage Category Measured Range LN Measured Range LL Measured Frequency Range Power Consumption Sampling Freq.between 4565 Hz Current Measurement Input Rated Current Measurement Range Overvoltage Category Measurement Surge Voltage Power Consumption Peak current for 1 sec Sampling Freq.between 4565 Hz Input Outputs Alarm Relay Outputs Max. Switching Current Max. Switching Voltage Max. Switching Power Mechanical Properties Weight Protection Class Assembly Type Dimensions Cable Cross Sections Supply Voltage, Current, Relay Outputs Stranded: Solid: Digital I/O, RS 485 Stranded: Solid: Ambient Conditions Operating Temperature Storage Temperature Relative Humidity (no condensation) Communication and Others Modbus RTU Battery Real Time Clock Standarts in Compliance Safety requirements for electrical equipment for measurement, control, and laboratory use EMC Electrostatic discharge immunity test EMC Radiated, radiofrequency, electromagnetic field immunity test EMC Electrical fast transient/burst immunity test EMC Surge immunity test EMC Immunity to conducted disturbances, induced by radiofrequency fields EMC Power frequency magnetic field immunity test EMC Voltage dips, short interruptions and voltage variations immunity tests Industrial, scientific and medical equipment Radiofrequency disturbance characteristics Limits and methods of measurement ECRAS V AC V DC A A 3P4W, 3P3W 4 TT, TN, IT digit < 6VA Vrms 500 Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.015,5A kv <0. VA 100 A 5,6 khz 0 0,91 kg IP 40 front, IP 0 rear Panel Mount W96xH96xD7,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG 1,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT II acc. to IEC EN EN EN EN EN EN EN EN 55011/A1: ECRAS ALARM V AC V DC A A 3P4W, 3P3W 4 TT, TN, IT digit < 6VA Vrms 500 Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.015,5A kv <0. VA 100 A 5,6 khz 10 A 50 VAC 150 VA 0,9 kg IP 40 front, IP 0 rear Panel Mount W96xH96xD7,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG 1,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT II acc. to IEC EN EN EN EN EN EN EN EN 55011/A1:010
15 Dimensions (mm) Wiring Diagrams Star Connection (with neutral) Delta Connection (no neutral) Measuring Current Measuring Voltage Measuring Current Measuring Voltage
16 Rapidus Power Factor Controller
17 Moduler design No connector cables No fixing screws State of the art technology Easy mounting on panels connection to system
18 Dynamic Capacitor Monitoring DCM is a supreme function in Rapidus which enables the user to make proactive maintenance for compensation cabinets. DCM tracks the real time KVAR values of each capacitor and uses the measured KVAR value in compensation calculations. If a contactor is broken or a capacitor is out of order, DCM will detect it within 1 or days and activate the alarm for user. DCM has 3,4% accuracy. This information is valid for 3 shift operating facilities. Initial Values Alarm Level Setup Contactors C1 C C3 C4 Alarm Level %0 5 kvar 10 kvar 10 kvar 0 kvar After a certain time Alarm screen indicates the status of 3rd and 4rd steps MOBDUS RS 485 Remotely monitor actual kvar values of each step in addition to DCM alarms Pro active maintenance Highly sensitive compensation due to realtime kvar measurements of the steps Contactors C1 C C3 C4 Alarm Level %0 3 kvar 3 kvar 1 kvar 0 kvar Means capacitor should be changed Means capacitor is out of order or contactor is out of order or cable connection problem or fuse blown
19 Capacitor/Reactor1P/3P Rapidus can be connected to either single or three phase capacitors or reactors. Rapidus can be used in Data Centers or Mining Areas where the load is frequently capacitive. Rapidus can be used with a selection of capacitors and reactors in single or three phase connections. Mono Phase 3 Phase Reactor 1 Phase Reactor 3 Phase Capacitor Capacitor 3 Phase Capacitor Fig. A Fig. B V1 V V3 N V1 V V3 N Advanced Learning Function L3 K3 L K L1 K1 V1 V V3 N K3 L3 L K K1 L1 V1 V3 V N Rapidus can learn the connections and capacitor or reactor values. If there is a fault in the CT or VT connections, Rapidus detects the fault and corrects it. It shows the fault on the screen. Correct connection Wrong connection Advanced Learning Function Rapidus detects the wrong connections after learning mode is activated. Connections are displayed on the screen. Rapidus don't take misconnections into consideration and operates as if all connections are properly made as shown in Fig A. Rapidus learns all step values regardless they are capacitor or reactor.
20 Rapidus = PFC + Energy Analyzer In standart compensation cabinets, there are always a multimeter or analyzer to be associated with a power factor controller. Rapidus, as a twoinone device meets both requirements of the industry. User can reduce the cost of analyzer, wiring and labor by choosing Rapidus. Saving On Extra multimeter / analyzer cost Wiring cost Labor cost Rapidus as an Energy Analyzer Rapidus can measure and monitor the following parameters : All electrical parameters Min, Max and Average Values for Hour, Day and Month Harmonics upto 51 st Demand Phasor Diagram Data Logging Rapidus measures Rapidus logs Rapidus logs Rapidus logs 1 MB Memory 68 different energy parameters. 80 days hourly 40 days daily 36 months monthly real time measurements of 68 parameters. demand values for P. Q, S, I 50 recent alarms with time stamp.
21 Surge Withstand 100 A/1 sec Rapidus current inputs can withstand surges upto 100 A for 1 second. In case of a current rise in the secondary winding of the current transformer, current inputs of the PFC should withstand to these peak values. If not, current transformer may explode due to open circuit in the secondary winding. This may result with shutdown of the compensation system and compensation penalty for the enduser. 5 A 100 A 1 sec. Accuracy Class (0,s) Function Symbol Function Function Performance Class According to IEC Measuring Range Other Complementary Characteristics P Total active power 0, 10 % I b I I max 0,5 Ind to 0,8 Cap Q V Total reactive power 1 5 % I b I I max 0,5 Ind to 0,5 Cap S A Total apparent power 0, 10 % I b I I max 0,5 Ind to 0,8 Cap E A Total active energy 0, 0 to IEC 6053 Class 0.S E RV Total reactive energy 0 to IEC Class f Frequency 0, Hz I Phase current 0, 0 % I b I I max I Nc Neutral current 0,5 0 % I b I I max U Voltage 0, U min U U max P FA Power factor 0,5 0,5 Ind to 0,8 Cap THDV Total harmonic distortion voltage 1 0 % to 0 % THDI Total harmonic distortion current 1 0 % to 100 % Other Features Graphical LCD Language Support Harmonics Measurement upto 51 Advanced Alarm Settings Real Time Clock
22 Rapidus Product Selection Chart General Graphical LCD 6 buttons Password Protection Measurement Type Supply Voltage AC Supply Voltage DC Day/Night Input Number of Steps Current Transformer Ratio Voltage Transformer Ratio Connection Type Type of Switching Target cosq Accuracy Class Voltage Accuracy Class Current Accuracy Class Active Energy Number of Measurement in a period Power Consumption Power Quality Measurements Harmonics / current and voltage THDVoltage in % THDCurrent in % Phasor Diagram Data Logging Average, Minimum, Maximum Values Alarms Time Stamp Voltage Measurement Input (Supply and Measurement Inputs are the same node) Overvoltage Category Measured Range LN Measured Range LL Measured Frequency Range Power Consumption Sampling Freq.between 4565 Hz Current Measurement Input Rated Current Measurement Range Overvoltage Category Measurement Surge Voltage Power Consumption Peak current for 1 sec Sampling Freq.between 4565 Hz Input Outputs Relay Outputs Max. Switching Current Max. Switching Voltage Max. Switching Power for a Single Relay Alarm Relay Outputs Max. Switching Current Max. Switching Voltage Max. Switching Power GEN Input Input range Mechanical Properties Weight Protection Class Assembly Type Dimensions Cable Cross Sections Voltage, Current, All Relay Outputs, Gen Input Stranded: Solid: RAPIDUS 31RE 3 Phase 957 V AC 957 V AC 8565 V AC 11 Selectable A A 3P4W Relay 0,801,00 Inductive or Capacitive < 10VA Upto 51st I 957 Vrms Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 1 A 50 VAC 150 VA 4 A 50 VAC 1000 VA VAC 0,670 kg IP 40 front, IP 0 rear Panel Mount W144xH144xD78,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG RAPIDUS 3RE 3 Phase 957 V AC 957 V AC 8565 V AC 14 Selectable A A 3P4W Relay 0,801,00 Inductive or Capacitive < 10VA Upto 51st I 957 Vrms Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 4 A 50 VAC 150 VA 4 A 50 VAC 1000 VA VAC 0,765 kg IP 40 front, IP 0 rear Panel Mount W144xH144xD78,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG RAPIDUS 11R 1 Phase 957 V AC 957 V AC 8565 V AC 11 Selectable A A 3P4W Relay 0,801,00 Inductive or Capacitive < 10VA Upto 51st I 957 Vrms Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 1 A 50 VAC 150 VA 4 A 50 VAC 1000 VA VAC 0,653 kg IP 40 front, IP 0 rear Panel Mount W144xH144xD78,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG RAPIDUS 1R 1 Phase 957 V AC 957 V AC 8565 V AC 14 Selectable A A 3P4W Relay 0,801,00 Inductive or Capacitive < 10VA Upto 51st I 957 Vrms Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 4 A 50 VAC 150 VA 4 A 50 VAC 1000 VA VAC 0,750 kg IP 40 front, IP 0 rear Panel Mount W144xH144xD78,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG RAPIDUS 18R 1 Phase 957 V AC 957 V AC 8565 V AC 18 Selectable A A 3P4W Relay 0,801,00 Inductive or Capacitive < 10VA Upto 51st I 957 Vrms Vrms 4565 Hz <0.1 VA 5,6 khz 6A 0.016A kv <0. VA 100 A 5,6 khz 8 A 50 VAC 150 VA 4 A 50 VAC 1000 VA VAC 0,415 kg IP 40 front, IP 0 rear Panel Mount W96xH96xD7,5 mm 14AWG 4mm 1 AWG x1.5 mm x16 AWG RS 485 Stranded: Solid: Ambient Conditions Operating Temperature Storage Temperature Relative Humidity (no condensation) Communication and Others Modbus RTU Battery Real Time Clock Standarts in Compliance Safety requirements for electrical equipment for measurement, control, and laboratory use 1,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT III acc. to IEC ,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT III acc. to IEC ,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT III acc. to IEC ,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT III acc. to IEC ,5 mm 16AWG 1.5 mm 16 AWG x0.75 mm x18 AWG 0 C. +60 C.. 30 C. +80 C.. 95% 300 VAC CAT III acc. to IEC
23 Dimensions (mm) Wiring Diagrams Gen Input Gen Input Rapidus 1 Relays ( )
24 ETOR Ethernet Gateway
25 Product Code Product Name Etor4 Etor Product Description RS 485 to Ethernet bidirectional RS 3 to Ethernet bidirectional Can be operated in server or client mode Supports 6 different user s interrogation at the same time 64 devices can be connected Slimmest gateway in the market DIN Rail mount 17,5 mm ETOR 4 Ethernet MODBUS Converter ETOR series convert between MODBUS and Ethernet protocols and thus allow users to; Control and monitor the serial devices over the Internet or local network (server mode) Control and monitor the devices supporting Ethernetbased protocols via the serial interface (client mode) It supports up to 6 remote connections. ETOR series can be configured via builtin USB port or builtin web server by using an Internet browser. Technical Specifications Supply 1860V AC/DC and USB Reverse Connection Protection Network Features 6 Remote Connections Configuration via Web Interface DHCP (Automatic IP Assignment) ARP Ping blocking Serial Communication Supports Up To 64 Devices Baudrate: 300, 600, 100, 400, 4800, 9600, 1900, 38400, 57600, Stop Bit and Parity Bit Settings USB Configuration via USB Micro USB Connection Interface Supported Protocols MODBUS RTU MODBUS ASCII MODBUS TCP MODBUS RTU via TCP MODBUS ASCII via TCP
26 Protocol Conversions ETOR is capable of performing conversions between the serial and Ethernet data by running in server or client modes. Server Mode When running in the server mode, ETOR converts the MODBUS TCP, MODBUS RTU over TCP and MODBUS ASCII over TCP queries to MODBUS RTU and MODBUS ASCII queries and transmits these queries to the serial devices. It converts the responses it receives to query protocols and transmits them to the querying device (master). Query Side Response Side Physical Port Ethernet Physical Port Serial Protocol MODBUS TCP Protocol MODBUS RTU MODBUS RTU over TCP MODBUS ASCII MODBUS ASCII overtcp Client Mode When running in the client mode, ETOR converts the MODBUS RTU and MODBUS ASCII queries to MODBUS TCP, MODBUS RTU over TCP and MODBUS ASCII over TCP queries and transmits these queries to the remote devices connected to the Internet or the local network. The responses received from the devices, convert the query protocols and transmit them to the querying device (master). Query Side Response Side Physical Port Serial Physical Port Ethernet Protocol MODBUS RTU Protocol MODBUS TCP MODBUS ASCII MODBUS RTU over TCP MODBUS ASCII over TCP
27
28
Rapidus Power Factor Controller
Rapidus Power Factor Controller Moduler design No connector cables No fixing screws State of the art technology Easy mounting on panels connection to system Dynamic Capacitor Monitoring DCM is a supreme
More informationEnergy Monitoring Solutions
Monitoring Solutions More eff iciency than you expected The Fundamentals Def ining an energy analyzer in simple terms An energy analyzer provides highly accurate measuring for main electrical and Metering
More informationData Sheet. Digital Multifunctional Power Meter with LCD Display and Optional Modules WPM D
WPM 770 Data Sheet 679.D.141.02 Digital Multifunctional Power Meter with LCD Display and Application The digital Weigel Power Meters WPM 770 have been designed to display the electrical parameters in low
More informationRAPIDUS - POWER FACTOR CORRECTION
RAPIDUS - POWER FACTOR CORRECTION LCD Screen, Turkish/English language options 1MByte memory Operates also as an energy analyzer Tariff meter Fast and easy setup Learns connection and steps automatically
More informationNetworks TN, TT, IT networks 3 and 4-phase networks Up to 4 single-phase networks
Memory 256 MB 8 Tariffs Harmonics Pulse inputs and outputs Measurement accuracy 0.5 UMG 96RM Multifunction power analyser Communication (device-specific) Modbus (RTU) Profibus DP V0 Profinet TCP/IP M-Bus
More informationEM132 EM132. Main Features. Multi-functional 3-Phase Transducer. Energy Meter
EM132 MULTI-FUNCTION TRANSDUCER SATEC EM132 is a Smart DIN Rail Multi-Function Transducer with a local display. It is based on SATEC s best seller PM130 PLUS with an off-the-shelf LCD display (similar
More informationPMC 530 Series Advanced Multifunction Meter
IEC 62053 22 Class 0.5S WF Capture @ 128 samples/cycle WF and Data Recording Harmonics & Transient Monitoring I residual Monitoring Setpoint Alarms, SOE Log RS 485 and I/O Capabilities Large, Bright, Backlit
More informationProData DATA LOGGER. Chapter 03 ProData data logger. Ethernet. Pulse inputs and Pulse outputs. Modbus-Ethernet gateway. Thermistor input.
ProData DATA LOGGER Ethernet Pulse inputs and Pulse outputs Modbus-Ethernet gateway Thermistor input Memory 32 MB Threshold value monitoring 139 Smart and compact: Save energy costs through the universal
More informationProData data logger. Ethernet. Pulse inputs and Pulse outputs. Thermistor input. Modbus-Ethernet gateway. Memory 32 MB. Threshold value monitoring
Ethernet Pulse inputs and Pulse outputs Modbus-Ethernet gateway Thermistor input Memory 32 MB Threshold value monitoring ProData data logger 1 Smart and compact: Save energy costs through the universal
More informationEM-1000 /EM-2000/ EM-3000 Series Multifunction Power and Energy Meters
Power and Energy Meters Code No. LIT-1900845 Issued December 4, 2013 EM-1000 /EM-2000/ EM-3000 Series Multifunction Power and Energy Meters EM-1000 Series Meter Description The EM-1000 Series monitor is
More informationContact protection relay
Contact protection relay Ordering details SVR 450 08 F0000 The protects sensitive control contacts from excessive load. It can be used with latching function or without. Bounce time of control contacts
More informationMIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET
& DIN, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationMIC-2 Multi-instrument DATA SHEET
Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules
More informationUMG 604. UMG 604 Power analyser. Modbus master, Ethernet gateway. Harmonics. Memory 128 MByte. Homepage. Graphic programming.
Harmonics Modbus master, Ethernet gateway Memory 128 MByte Homepage Events Graphic programming UMG 604 Power analyser Communication Profibus (DP/ V0) Modbus (RTU, UDP, TCP, Gateway) TCP/IP BACnet (optional)
More informationMINER-S Station Controller
MINER-S Station Controller Substation Automation MINER-S Station Controller The MINER-S Station Controller is a SCADA enabled fixed point remote terminal unit (RTU) with a data concentrator, event reporter,
More informationUMG 605. UMG 605 Power quality analysers for DIN rails. Flicker. Reporting. Memory 128 MByte.
Harmonics Alarm management Flicker Reporting Email Memory 128 MByte Power quality analysers for DIN rails Communication Profibus (DP / V0) Modbus (RTU, UDP, TCP, Gateway) TCP/IP BACnet (optional) HTTP
More informationThree-phase electricity meter with instantaneous reading of electrical variables. Input current measurement: 5 A, 90 A, 150 A, 250 A (span by model).
SCEE AR 3 - Smart Analyzer 485/Ethernet with web visualization Three-phase electricity meter with instantaneous reading of electrical variables. System variables: V, A, kw, kva, kvar, PF and Hz. Variables
More informationMIC-2 MKII, Multi-instrument DATA SHEET
MIC-2 MKII, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationDKM-407 DIN RAIL TYPE NETWORK ANALYZER
DKM-407 User Manual DKM-407 DIN RAIL TYPE NETWORK ANALYZER DESCRIPTION The DKM-407 is a DIN rail mounted precision and low cost unit allowing measurement and remote monitoring of AC parameters of a distribution
More informationPM174 PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER. Features
PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER The PM174 is a compact, multi-function, three-phase AC powermeter and power quality analyzer specially designed to meet the requirements of users ranging
More informationPMC-630 Series Advanced Multifunction Meter
IEC 62053-22 Class 0.5S Compliant 2MB Log Memory Power Quality Monitoring Waveform Recording SOE Log Setpoint Alarms RS-485 and I/O Capabilities I residual Monitoring Large, Bright, Backlit LCD Display
More informationisma-b-mg-ip User Manual Global Control 5 Sp. z o.o. Poland, Warsaw
isma-b-mg-ip User Manual Global Control 5 Sp. z o.o. Poland, Warsaw www.gc5.pl Table of content 1 Introduction... 4 1.1 Revision history... 5 1.2 Safety rules... 5 1.3 Technical specifications... 6 1.4
More informationEnergy Management Energy Transducer Type ET112
Energy Management Energy Transducer Type Single phase energy transducer Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Accuracy ±0.5% RDG (current/voltage Direct current measurement
More informationDEIF A/S. MIC Multi-instrument G. Data sheet. Features. Accuracy. Measurements. Installation. Intelligent. Display. Communication DEIF A/S
Multi-instrument 4921210107G Features Measurements All 3-phase AC measurements True RMS Replaces analogue meters Intelligent Suitable for all 3-phase network topologies Replaces transducers Accuracy U,
More informationPower Meter PowerMonitor 500
ROCKWELL AUTOMATION PROCUREMENT SPECIFICATION PROCUREMENT SPECIFICATION PowerMonitor 500 NOTICE: The specification guidelines in this document are intended to aid in the specification of products. Specific
More informationwith Backlight Graphic LCD Screen
with Backlight Graphic LCD Screen ENERGY AND AUTOMATION POWER OF ENERGY SAVING For the control of energy distribution systems detecting when problems occur that could put the quality and availability of
More informationGCR 06, GCR 12. Power factor correction controller. User and service manual
GCR 06, GCR 12 Power factor correction controller User and service manual version 1.6 Czech Republic Czech Republic 1 Content 1. Front control panel and back terminal panel...3 2. Device description...
More informationINSTALLATION DKM-409 NETWORK ANALYSER WITH HARMONIC MEASUREMENT AND SCOPEMETER. Before installation:
DKM-409 NETWORK ANALYSER WITH HARMONIC MEASUREMENT AND SCOPEMETER The DKM-409 is a precision instrument designed for displaying various AC parameters in 3-phase distribution panels. Thanks to its isolated
More informationProgrammable Relay ZEN V2 Units
Programmable Relay ZEN V2 Units Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty
More informationprotocol can be used. The SB2WEB24 is also equipped with an RS485 port for communication
Smart Dupline SWE Cnet Controller Type S2WE24 Product Description The S2WE24 programmable Cnet Controller is the brain and central unit in Carlo avazzi s integrated concept for HVC and lighting control
More informationATV12P075M3 variable speed drive ATV kW - 1hp V - 3ph - on base plate
Characteristics variable speed drive ATV12-0.75kW - 1hp - 200..240V - 3ph - on base plate Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly
More informationATV12H018M2 variable speed drive ATV kW hp V - 1ph
Characteristics variable speed drive ATV12-0.18kW - 0.25hp - 200..240V - 1ph Complementary Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly
More informationScout-S Station Controller
Scout-S Station Controller Substation Automation Scout-S Station Controller The Scout-S Station Controller is a SCADA enabled remote terminal unit (RTU) with a data concentrator, event reporter, and built-in
More informationTM221CE24R controller M IO relay Ethernet
Product data sheet Characteristics TM221CE24R controller M221 24 IO relay Ethernet Complementary Main Discrete I/O number 24 Number of I/O expansion module Supply voltage limits Network frequency Inrush
More informationPowerCube by Onyx Power
PowerCube by Onyx Power DOE 2016 DRY TYPE TRANSFORMER ONYX Power transformers are engineered to deliver optimal high efficiency for lower operating costs. Rated for 600 volts and below, the PowerCube meets
More informationAPU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET
APU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET Measurement input, auto range Up to 1000 V AC L-L Up to 12.5 A (sinusoidal) 16 400 Hz Output Up to four analogue outputs Relay output RS 485 Modbus
More informationMINER-S Station Controller. Substation Automation
Substation Automation MINER-S Station Controller incorporates traditional RTU functions with new technology in a compact design MINER-S Station Controller combines the functions of a traditional RTU with
More informationATV12HU22M3 variable speed drive ATV12-2.2kW - 3hp V - 3ph - with heat sink
Characteristics variable speed drive ATV12-2.2kW - 3hp - 200..240V - 3ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly
More informationPowerLogic power-monitoring units. EM1000 series power meter. Technical data sheet
PowerLogic power-monitoring units power meter Technical data sheet Distributed By: MetersUSA www.metersusa.com Meters@MetersUSA.com 1 224 365 5935 Basic energy meters Functions and characteristics PB105460
More informationWM20. Power analyzer for three-phase systems. Benefits. Description
WM20 Power analyzer for three-phase systems Description WM20 is a modular power analyzer for single-, two- and three-phase systems. It is made up of a maximum of three components: the main unit that displays
More informationTM221CE40T controller M IO transistor PNP Ethernet
Product data sheet Characteristics TM221CE40T controller M221 40 IO transistor PNP Ethernet Complementary Main Discrete I/O number 40 Number of I/O expansion module Supply voltage limits Inrush current
More informationOHIO SEMITRONICS, INC. AC MULTIFUNCTION PROGRAMMABLE TRANSDUCERS & -1000L
AC PROGRAMMABLE TRANSDUCERS MODBUS OR LONWORKS DESCRIPTION The DMT-1000 is a programmable transducer with an RS-485 bus interface (MODBUS ). It supervises several variables of a poly-phase electrical power
More informationEnergy Management Modular DC Energy analyzer Type VMU-E and VMU-X
Energy Management Modular DC Energy analyzer Type VMU-E and VMU-X Modular solution based on the combination of two units: VMU-E analysis unit and VMU-X universal power supply and RS485 communication unit.
More informationATV310H075N4E variable speed drive ATV kw - 1 hp V - 3 phase
Characteristics variable speed drive ATV310-0.75 kw - 1 hp - 380...460 V - 3 phase Main Range of product Altivar Easy 310 Product or component type Product specific application Assembly style Device short
More informationSPM91 DIN Rail Single Phase Energy Meter Installation & Operation Manual V1.0
SPM91 DIN Rail Single Phase Energy Meter Installation & Operation Manual V1.0 ZHUHAI PILOT TECHNOLOGY CO., LTD. I Danger and warning! This device can be installed only by professionals. The manufacturer
More informationEnergy Management BUS Adapter Type VMU-B 01
Energy Management BUS Adapter Type VMU-B 01 RS485 (Modbus) to M-Bus communication adapter EM21-72D, EM24-DIN and EM33-DIN self recognition Front diagnostic LED s Universal 18 to 260 VAC/DC power supply
More informationATV12P037F1 variable speed drive ATV kW hp V - 1ph - on base plate
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - on base plate Complementary Main Range of product Altivar 12 Product or component type Product destination Product specific
More informationUMG 20CM. 20 Channel Branch Circuit Monitoring Device with RCM
20 Channel Branch Circuit Monitoring Device with RCM RCM Harmonics via analysis channel Alarm management GridVis Analysis software 20 current channels Interfaces / communication RS485 RTU Accuracy of measurement
More informationEM270. Multi-channel power analyzer. Benefits. Description
Multi-channel power analyzer Description Multi-circuit power analyzer for single or threephase systems installable on panels or DIN rails. Manages current input via two current transformer blocks connected
More informationMPR-3 SERIES NETWORK ANALYSER USER MANUAL
MPR-3 SERIES NETWORK ANALYSER USER MANUAL INDEX SAFETY AND WARNINGS... 3 Warning... 3 Safety... 3 Warranty... 3 OPERATING CONDITIONS... 4 INTRODUCTION... 5 General Features... 5 Applications... 6 MPR-3
More informationTHE NEXT TRANSDUCER GENERATION
THE NEXT TRANSDUCER GENERATION ADJUSTABLE HIGH-ACCURACY HEAVY-CURRENT SENSORS SINEAX DM5S/DM5F Heavy-current sensor for grid monitoring. SINEAX DM5S and SINEAX DM5F are freeprogrammable universal measurement
More informationPower and accuracy. Versatile. One display can monitor up to 32 measuring modules information
Power and accuracy 0.2% or 0.5% class in power and active energy measurement Over 500 electric parameters display Both voltage and current harmonics spectrum graphics (to the 50 th ) Maximum and minimum
More informationPQM - Power Quality Monitoring
UMG 511 PQM - Power Quality Monitoring Class A power quality analyser according to IEC61000-4-30 The UMG 511 power quality analyser is particularly suitable for monitoring power quality according to standards
More informationTM221M16R controller M IO relay
Product data sheet Characteristics TM221M16R controller M221 16 IO relay Complementary Main Discrete I/O number 16 Number of I/O expansion module Supply voltage limits Inrush current Power consumption
More informationAcuRev Multi-Circuit Power and Energy Meter. Shop for Accuenergy products online at:
AcuRev 2000 Multi-Circuit Power and Energy Meter ISO9001 Certified Comply to IEC 62053-21 Measurement Standard Support up to 18 Individual Channels for Energy Measurement Multifunction Power Metering,
More informationEnergy Management BUS Adapter Type VMU-B
Energy Management BUS Adapter Type RS485 (Modbus) to M-Bus communication adapter EM24-DIN and EM21-72D self recognition Front diagnostic LED s Universal 18 to 260 VAC/DC power supply Dimensions: 1-DIN
More informationVoltage Transducer UMT516 / MT516
Voltage Transducer UMT516 / MT516 True RMS AC voltage measurements Voltage auto range measurements up to 600V # Wide frequency measurement range 16 400 Hz High accuracy class 0.2 (IEC-688), 0.1 on communication
More informationRTU500 series Data Sheet Power Supply CP-E 24/2.5
Data Sheet Power Supply CP-E 24/2.5 Power Supply CP-E 24/2.5 Application The primary switch mode power supply offers two voltage input ranges. This enables the supply with AC or DC. Furthermore it is equipped
More informationEM271. Multi-channel power analyzer. Benefits. Description
Multi-channel power analyzer Description Multi-load power analyzer for single or three-phase systems installable on panels or DIN rails. Manages current input via two groups of split-core current sensors
More informationTM221CE40R controller M IO relay Ethernet
Characteristics controller M221 40 IO relay Ethernet Main Range of product Product or component type [Us] rated supply voltage Jan 6, 2019 Modicon M221 Logic controller 100...240 V AC Discrete input number
More informationEM133 EM133 TOU SMART ENERGY METER. Main Features. Multifunctional 3-Phase Smart Meter. Billing/TOU Energy Meter
TOU SMART ENERGY METER SATEC is a Smart DIN Rail TOU Energy Meter. It is based on SATEC s best seller PM130 PLUS with an off-theshelf LCD display (similar to the BFM136 display). The provides the full
More informationRM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases
Characteristics three-phase control relay 183 528Vac, 2 C/O Main Range of product Product or component type Relay type Network number of phases Relay name Relay monitored parameters Time delay type Switching
More informationPowerLogic power-monitoring units. PM1000 series power meter. Technical data sheet
PowerLogic power-monitoring units power meter Technical data sheet 2011 Basic energy meters Functions and characteristics PE86261 PE86260 PowerLogic PM1000 power meter. The PowerLogic power meters are
More informationPower Energy Analyser & Logic Controller Maximum Demand Load Shed Controller 2nd - 40th Voltage & Current Harmonic Analyser
Power Energy Analyser & Logic Controller Maximum Demand Load Shed Controller 2nd - 40th Voltage & Current Harmonic Analyser 4 Target Max. Demand (MD) Load Shed Controller Up to 64 loads may be shed to
More informationMID PRELIMINARY DATA SHEET. RI-D Series. Single Phase Multifunction Energy Meter (MID Certified) MID
PRELIMINARY DATA SHEET RI-D35-100 Series Single Phase Multifunction Energy Meter (MID Certified) MID direct connected Two pulse outputs LED pulse indication High definition LCD display with white backlight
More informationMPR-4 SERIES NETWORK ANALYSER USER MANUAL
MPR-4 SERIES NETWORK ANALYSER USER MANUAL INDEX SAFETY AND WARNINGS... 3 Warning... 3 Safety... 3 Warranty... 3 OPERATING CONDITIONS... 4 INTRODUCTION... 5 General Features... 5 Applications... 6 MPR-4
More informationMETERING INSTRUMENTS AND CURRENT TRANSFORMERS
Energy Meters p16-1 Data Concentrators p16-3 Digital Measuring Instruments p16-4 Expansion Modules and Accessories p16-15 Current Transformers p16-19 Software and Applications p16-22 Systems Management
More informationRTU560. CT/VT Interface 560CVT10. Meter Operation. Application. Characteristics. Data Sheet CT/VT Interface 560CVT10. Instantaneous Meter Values
CT/VT Interface 560CVT10 The fault current is measured up to 20 times nominal current. Therefore the current inputs withstand 50 times nominal current for 1 s. The CT/VT interface is equipped with one
More informationATV12H075M3 variable speed drive ATV kW - 1hp V - 3ph - with heat sink
Product datasheet Characteristics ATV12H075M3 variable speed drive ATV12-0.75kW - 1hp - 200..240V - 3ph - with heat sink Complementary Main Range of product Altivar 12 Product or component type Product
More informationRE17LAMW on-delay timing relay - 1 s..100 h V AC/ DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/ DC - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type Time
More informationSEL-734B Data Sheet. Advanced Monitoring and Control System. Major Features and Benefits
Advanced Monitoring and Control System Compact Enclosure Full-Size Enclosure Major Features and Benefits The SEL-734B combines volt/var based capacitor bank control with power quality monitoring and advanced
More informationXPSMF35. Product data sheet Characteristics. Preventa safety PLC compact - Profibus DP protocol. Main. Complementary. Safety module name
Product data sheet Characteristics XPSMF3542 Preventa safety PLC compact - Profibus DP protocol Main Range of product Product or component type Safety module name Safety module application Nov 13, 2018
More informationUMG 511. Class A EN UMG 511 Class A power quality analyzer. according to EN50160, IEEE 519, ITIC, IEC Areas of application
UMG 511 Class A EN 50160 UMG 511 Class A power quality analyzer according to EN50160, IEEE 519, ITIC, IEC 61000-4-30 The UMG 511 power quality analyzer is particularly suitable for monitoring power quality
More informationABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 40 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Complementary
More informationMehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording
Mehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording Two independent, simultaneously operating recorders in one package Triggering on input quantities and calculated values, such as
More informationRE17LCBM off-delay timing relay - control - 1 s..100 h V - solid state output
Characteristics off-delay timing relay - control - 1 s..100 h - 24..240 V - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type
More informationHMI software. gems 3100 Multi-Channel Power Meter
HMI software gems 3100 Multi-Channel Power Meter gems 3100 installed in local distribution panels as well as a main electric distribution panel has the features to manage facilities by metering and monitoring
More informationPowerLogic power-monitoring units. Power Meter PM500. Technical data sheet 2006
PowerLogic power-monitoring units Technical data sheet 2006 Functions and characteristics E90463 The PowerLogic PM500 Power Meter provides all measurement capabilities required to monitor an electrical
More informationHMISBC Rear Module controller panel - Dig 8 inputs/8 outputs +Ana 4 In/2 Out
Characteristics Rear Module controller panel - Dig 8 inputs/8 outputs +Ana 4 In/2 Out Main Range of product Product or component type Complementary Supply [Us] rated supply voltage Immunity to microbreaks
More informationDIRIS Digiware D and C Communication and control power interfaces
Multi-circuit metering and measurement diris-dw_006_a_us_cat diris-dw_142_a The solution for > Industry > Building > Infrastructure > Data centers DIRIS D-40/D-50/D-70 Centralization and display of data
More informationUMG 605. UMG 605 power quality analyzer (EN 50160, IEEE 519, ITIC)
UMG 605 UMG 605 power quality analyzer (EN 50160, IEEE 519, ITIC) The UMG 605 power quality analyzer is particularly suitable for monitoring power quality according to standards such as EN 50160. All power
More informationATV310HU30N4E variable speed drive ATV310-3 kw - 4 hp V - 3 phase
Characteristics variable speed drive ATV310-3 kw - 4 hp - 380...460 V - 3 phase Complementary Product destination Main Range of product Altivar Easy 310 Product or component type Product specific application
More information4 Is this model available for special primary current and special primary voltage?
Category: Sales 1 Is it possible to exchange the backlights? The backlights are LED, no need to exchange. Fukuyama Works, Mitsubishi Electric Corporation March, 2018 2 Which standards does this model support?
More informationATV930U30M3 variable speed drive - ATV930-3kW - 200/240Vwith braking unit - IP21
Characteristics variable speed drive - ATV930-3kW - 200/240Vwith braking unit - IP21 Main Range of product Product or component type Device application Device short name Variant Product destination Mounting
More informationTM221ME32TK controller M IO transistor PNP Ethernet
Product data sheet Characteristics TM221ME32TK controller M221 32 IO transistor PNP Ethernet Complementary Main Discrete I/O number 32 Number of I/O expansion module Supply voltage limits Inrush current
More informationOTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
More informationSmart Energy & Power Quality Solutions. UMG 505 Power analysis, LON and I/O-Vielfalt
Smart Energy & Power Quality Solutions UMG 505 Power analysis, LON and I/O-Vielfalt UMG 505 UMG 505 Power analysis, LON and I/O-Vielfalt Power analysers of the UMG505 product family are mainly designed
More informationPM130 PLUS PM130 PLUS POWER METER. Features. Models. Multifunctional 3-phase Power Meter
PM130 PLUS POWER METER The PM130 PLUS is a compact, multi-function, three-phase AC powermeter specially designed to meet the requirements of users ranging from electrical panel builders to substation operators.
More informationUMG 20CM. UMG 20CM 20 Channel Branch Circuit Monitoring Device with RCM. Harmonics via analysis channel RCM. Alarm management.
RCM Harmonics via analysis channel Alarm management GridVis Analysis software 20 current channels 20 Channel Branch Circuit Monitoring Device with RCM Interfaces / communication RS485 RTU Accuracy of measurement
More informationMODEL CIO-EN MODBUS/TCP, MODBUS/RTU I/O MODULE
INSTALLATION INSTRUCTIONS Revision B1 Rapid City, SD, USA, 05/2009 MODEL CIO-EN MODBUS/TCP, MODBUS/RTU I/O MODULE BE SURE POWER IS DISCONNECTED PRIOR TO INSTALLATION! FOLLOW NATIONAL, STATE AND LOCAL CODES.
More informationEnergy Management Modular Universal Utility Meter and Power Analyzer Type WM24-96
Energy Management Modular Universal Utility Meter and Power Analyzer Type WM24-96 Class 1 (active energy) Class 2 (reactive energy) Accuracy 0.5% RDG (current/voltage) Universal utility meter and power
More informationGeneral information. Display. Supply voltage
Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 6 DI 24V DC; 4 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information Product
More informationRT4F-48V/50A-WAC RECTIFIER
The RT4F-48V/50A-WAC is a switched mode rectifier (SMR) module designed to provide up to 58A of output current into a 48V nominal system, over a wide range of AC input voltage. This rectifier has been
More informationEnergy Management Modular DC Energy analyzer Type VIM-E and VIM-X
Energy Management Modular DC Energy analyzer Type VIM-E and VIM-X Modular solution based on the combination of two units: VIM-E analysis unit and VIM-X universal power supply and RS485 communication unit.
More informationMultichannel power analyzer for single, two and three-phase systems
WM50 Multichannel power analyzer for single, two and three-phase systems Description WM50 is a multichannel power analyzer for single, two and three-phase systems. Using TCD12 split core current sensors,
More information12-15VDC (12V±5%) 24-28VDC (24V±5%)
Features Description Universal AC input (85-264VAC) Long 7 year warranty Protections: SCP, OVP, OCP, OTP 1% full load burn-in test DC OK indicator LED with relay contacts cooling by free air convection,
More informationUMG 96RM. UMG 96RM Universal measurement instrument. Areas of application
UMG 96RM UMG 96RM Universal measurement instrument The UMG 96RM is a very compact and powerful universal measurement device designed for use in low and medium voltage distribution systems. In addition
More informationChrome DIN Rail Power Supply 12V 9.96W 1 Phase (Class II & NEC Class 2) / DRC-12V10W1A
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
More informationMultifuncion Measuring Device 96x96 mm, connection via CT
Viale Borri 231, 21100 Varese Italy Multifuncion Measuring Device Contents Pages 1. Description Use... 2 2. Range... 2 3. Overall dimensions... 2 4. Preparation Connection... 2 5. General characteristics...
More informationBus Bar Protection Relay B-PRO 4000
Bus Bar Protection Relay B-PRO 4000 Product Overview The IEC 61850 station bus embedded B-PRO 4000 relay provides complete bus and substation differential protection (low impedance) with CT saturation
More information