Pro/ENGINEER Interface for CATIA V5 with Associative Topology Bus (ATB) Pro/ENGINEER Wildfire Series Overview
|
|
- Shona Benson
- 6 years ago
- Views:
Transcription
1 Pro/ENGINEER Interface for CATIA V5 with Associative Topology Bus (ATB) Pro/ENGINEER Wildfire Series Overview Asa Trainer Director, Product Management March 2010 Rev I
2 Pro/ENGINEER Interface for CATIA V5 with ATB Licensed module Separately Licensed Module Installation Locked to Pro/ENGINEER (CPT-3232-L) Floating Module (PTN-3232-F) No CATIA V5 installation or licensing required Import and Export processor CATProduct Assembly format CATPart Part format CGR Facet format 2
3 Interface for CATIA V5 Entity Support Supports 3D geometry and topology ATB-enabled Config option topobus_enable yes no* Visibility support Show / No Show Layers Hidden Facet import/export via CGR format intf3d_in_import_as_facets yes no default* Default value for CATIA V5 is no Replaces c5_import_as_faceted yes no (default) in Pro/ENGINEER Wildfire 4.0 (M030 and later) Export transparency and edge color Pro/ENGINEER Wildfire 4.0 M090 and later Exact Rep Face Color (optional, by config) Config option c5_color_import yes no* Drawings and applications data (cabling, piping, CAE data) are NOT supported 3
4 Interface for CATIA V5 CGR Import Import *.CGR files (parts or assemblies) Import CATPart and/or CATProduct as faceted (extract CGR only) intf3d_import_as_faceted_heal yes (default) no 5 times faster than exact import! Good for Space Claim and Design-In-Context activities CGR Export Export Exact data as CGR (faceted) CATPart as CGR, CATProduct with CGR components Exports mixed part models (exact and facet features) as CATProduct with separate CATPart and CGR components 187 Components as Exact 20 min 187 Components as CGR Healed 7 min 187 Components as CGR Quick 4 min 4
5 Faceted Models for Design-in-Context Operations Mass Properties Calculation Measurement between Faceted & Exact Pairs Clearance Cross Section Creation Datum Feature Creation Formats Import STL, VRML, STEP Faceted, CATIA SOLM, DXF 3D & ProductView OL/ED CATIA CGR Design-in-Context JT 5
6 New in Pro/ENGINEER Wildfire 5.0 Cables as geometry Export and Import Intf3d_out_cables yes no (default) Facet and exact representation Updated Facet Export Controls New in Pro/ENGINEER Wildfire 4.0 M120 and 5.0 M020 New Step Size Intf3d_out_use_step_size yes no (default) Defines uniform size for triangles Chord Height and Step Size calculated per part Intf3d_out_diff_chord_heights yes no (default) Intf3d_out_diff_step_sizes yes no (default) Facet assembly formats only: CATProduct with CGR, JT w/o Step Size with Step Size 6
7 Interface for CATIA V5 Product Structure Support Support import and export of assemblies containing mixed source components i.e. CATProduct containing CATProduct CATPart CGR Additional support for import of assemblies containing mixed source components V4 *.model Must have Interface for CATIA II license for V4 support Distributed Pro/BATCH Support Export and Import TTDs for CATPart CATProduct CGR 7
8 Associative Topology Bus Associative One-directional associativity: CATIA V5 to Pro/ENGINEER Pro/ENGINEER Translated Image Model (TIM) Contains link to Source (CATIA V5) object Topology Bus Maps geometry IDs from CATIA V5 to Pro/ENGINEER Maintains geometry IDs as changes are made Checks for changes in the CATIA V5 (Source) object Update import geometry based on changes in Source object Change Link, Make Independent 8
9 Support for CATIA Long Names Long Names (up to 80 characters) supported Special Characters replaced ATB Mode in Model Tree without Truncation Non-ATB Mode Truncated in Model Tree With Duplicates Indexed Full Names Available 9
10 New in Pro/ENGINEER Wildfire 4.0 and PDMLink 9.1 Heterogeneous Design-In-Context (HDIC) 10 Multi-CAD (Pro/ENGINEER, UG, CATIA V5) support in Windchill PDMLink Represent complete mixed CAD product structure in Pro/ENGINEER and Windchill. One WT Part one source CAD Document multiple image CAD Documents Open CATIA V5 CAD Documents in Pro/ENGINEER to create ATB image CAD Documents. CATIA V4 supported in the context of a CATIA V5 assembly. ATB enables: Check Status, Unlink, Re-link, and associative Updates on Pro/ENGINEER TIM (image) models Required Components Pro/ENGINEER Wildfire 4.0 M060 or later CATIA V5 R16 (R17 supported in M080 or later) Windchill Workgroup Manager for CATIA V5 PDMLink 9.1 F000 or later Owner Source Part Derived Image TIM
11 New in Pro/ENGINEER Wildfire 5.0 Shared Memory Limited to GPI-based processors CATIA V5, CGR, JT, ProductView, UG, Autodesk Inventor, and CADDS5 Introduced in Pro/ENGINEER Wildfire 4.0 (M080) Benefits Reduced processing time Reduced memory (RAM) usage Shared 50 Memory Performance & Resource 40 Wildfire Import model (65 MB) % 600% M Faster less RAM M080 0 Minutes GB duplicate Pro/ENGINEER memory Before IPC duplicate GPI Processor memory Pro/ENGINEER Now shared memory GPI Processor 11
12 New in Pro/ENGINEER Wildfire 5.0 New Import Wizards Greater transparency of data exchange options Improved workflow Finer control of settings Updated import log files XML format (*.xml) Log Options Generate on Import Short - receipt Long - full log None Dynamically generate Info > Data Exchange > Import Log Status Indicator 12
13 Relevant Config.pro to profile mappings Config.pro options in Pro/ENGINEER Wildfire 4.0 topobus_enable yes no* Profile settings in Pro/ENGINEER Wildfire 5.0 Model tab Enable ATB intf3d_in_import_as_facets yes no default* Model tab Import as facet model And c5_import_as_faceted yes no* c5_color_import yes no* Misc tab Include Colors 13
14 Platform Support Pro/ENGINEER Interface for CATIA V5 with ATB Platforms Pro/ENGINEER Wildfire 4.0 (1) (1) Pro/ENGINEER Wildfire 4.0 Platform Support Matrix (2) Pro/ENGINEER Wildfire 5.0 Platform Support Matrix Pro/ENGINEER Wildfire 5.0 (2) OS Processor 32 bit 64 bit 32 bit 64 bit Windows XP Pentium/Xeon Windows Vista Pentium/Xeon HP-UX PA8000 SUN Solaris Ultra SPARC II SUN Solaris AMD & Intel (3) Legend Platform supported by Pro/ENGINEER and processor Platform supported by Pro/ENGINEER, but not by processor Platform not supported by Pro/ENGINEER 14
15 Interface for CATIA V5 - Version Support CATIA V5 Import Versions CATIA V5 Export Versions CATIA V5 Versions Support Pro/ENGINEER Wildfire 4.0 Pro/ENGINEER Wildfire 5.0 R10-R16 R17(M080) (1) [+R18 & R19 (M120)] (2) R10 R14-R16(M030) (3) [+R17, R18, & R19 (M120)] (4) R10-R17 [+R18 & R19 (M020)] (2) R10 R14-R16 (3) [+R17, R18, & R19 (M020)] (4) (1) R17 beta support in Pro/ENGINEER Wildfire 4.0. R17 Production support as of Pro/ENGINEER Wildfire 4.0 (M080). (2) R18 beta and R19 beta support as of Pro/ENGINEER Wildfire 4.0 (M080) & 5.0 (F000). R18 and R19 production support as of Pro/ENGINEER Wildfire 4.0 (M120) & 5.0 (M010). (3) Export format specified via config.pro option introduced in Pro/ENGINEER Wildfire 4.0 (M030). intf3d_out_catia_v5_version 10* ; (4) As of Wildfire 4.0 (M120) & 5.0 (M010) above arguments become * [R19 Public Hidden until WF5 M020 then Public] (5) TPI details CATIA V5 support in previous releases PTC
16 For more information contact: Asa Trainer Director of Product Management, MCAD Interoperability
Pro/ENGINEER Interface for CATIA II with Associative Topology Bus (ATB) Asa Trainer Director, Product Management September 2007
Pro/ENGINEER Interface for CATIA II with Associative Topology Bus (ATB) Asa Trainer Director, Product Management September 2007 Rev B Agenda Overview Benefits Details Customer Metric Case Study 2 Pro/ENGINEER
More informationPTC Technical Specialists E-Newsletter Date: March 31, 2005
PTC Technical Specialists E-Newsletter Date: March 31, 2005 PTC Product Focus: A) Data Exchange Options in Wildfire 2.0 Tips of the Week: Announcements: Most Recent Announcements B) Customizing the Windchill
More informationCoCreate OneSpace Modeling Data Adapter
CoCreate OneSpace Modeling 2007 - Data Adapter This document contains the individual datasheets for the native CAD adapters Table of Contents 1. CATIA V4 Data Adapter 2. Unigraphics Data Adapter 3. Pro/ENGINEER
More informationProductView Express Documentation
ProductView Express Documentation 1.0 Introduction ProductView Express, which supports Pro/ENGINEER Wildfire, is now available. Using ProductView Express, engineers and others involved in the product development
More informationFeature Comparison of PTC Creo View TM MCAD TM. Product Suite. Topic Sheet. Page 1 of 6 Feature Comparison of PTC Creo View MCAD Product Suite
Comparison of PTC Creo TM TM Product Suite Group User Interface Lite Microsoft Fluent paradigm Ribbon User Interface Usage Standalone version Interoperability with PTC Products Performance & Scalability
More informationCT CoreTechnologie 3D_Evolution Release Note 4.0 SP0
New 3D_Evolution 4.0 version 1. 3D_Evolution 4.0 presents a totally new graphic interface: - Easy to use, - Faster access to tools and commands, - Streamlined interface design, - Larger graphical window,
More informationAn Overview of Pro/ENGINEER
An Overview of Pro/ENGINEER The Foundation of Pro/ENGINEER What is Pro/ENGINEER? Pro/ENGINEER is a computer graphics system for modeling various mechanical designs and for performing related design and
More informationTetra4D Automate. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Automate
Tetra4D Automate Version 2018 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Automate Tetra4D Automate 2018 Release Notes 1 Table of Contents Version 2018... 3
More informationTetra4D Enrich. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Enrich
Tetra4D Enrich Version 2018 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Enrich Tetra4D Enrich 2018 Release Notes 1 Table of Contents Version 2018... 3 Definition
More informationCreo Elements/ Pro Advanced SE
Creo Elements/ Pro Advanced SE Create Innovative Designs Faster and More Efficiently Formerly Pro/ENGINEER The Creo Elements/Pro Advanced SE (Standard Edition) Package adds powerful data management capabilities
More informationFeature Comparison of PTC Creo View MCAD. Product Suite. Topic Sheet. Page 1 of 6 Feature Comparison of PTC Creo View MCAD Product Suite
Comparison of Product Suite Group User Interface Lite Microsoft Fluent paradigm Ribbon User Interface User interface customization Command finder Usage Standalone version Interoperability with PTC Products
More informationIntroduction to ANSYS DesignModeler
Lecture 7 CAD Connections 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 CAD Connections What will you learn from this presentation: Geometry Import
More informationPTC Technical Specialists E-Newsletter Date: December 1, 2006
PTC Technical Specialists E-Newsletter Date: December 1, 2006 PTC Product Focus: A) What s New in Sheetmetal Design for Wildfire 3.0 B) Windchill 3 rd Party Workgroup Managers Tips of the Month: A) Creating
More informationMULTICAx PD Plug-in Overview What's New? User Tasks Customizing Glossary Index
MULTICAx PD Plug-in Overview What's New? User Tasks Requirements Methodologies and Advice Initializing the Environment Initializing the Environment for Indirect Mode Initializing the Environment for Direct
More informationPTC CREO. ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks. PTC Creo Essentials Packages
PTC CREO PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more products in less time,
More informationFeatures and Benefits Summary
Autodesk Inventor 7 Features and Benefits Summary Autodesk Inventor 7, the latest release of Autodesk s 3D mechanical design software, improves the design process in several areas, including AutoCAD 2004
More informationAutodesk Moldflow Insight AMI Modeling
Autodesk Moldflow Insight 2012 AMI Modeling Revision 1, 21 March 2012. This document contains Autodesk and third-party software license agreements/notices and/or additional terms and conditions for licensed
More information3D-Tool Version 13 - Specifications. Available Program Versions. Free Test. Licensing and Activation. Software Requirements
3D-Tool Version 13 - Specifications 3D-Tool is a professional CAD-Viewer for 3D-models and 2D-drawings. You do not need any special CAD skills to view models in 3D, to measure distances, angles, radii
More information3D-Tool Version 13 - Specifications. Available Program Versions. Free Test. Licensing and Activation. Software Requirements
3D-Tool Version 13 - Specifications 3D-Tool is a professional CAD-Viewer for 3D-models and 2D-drawings. You do not need any special CAD skills to view models in 3D, to measure distances, angles, radii
More informationSolidView 2016 Features List
SolidView 2016 Features List SolidView/Lite Features View, measure and modify SVD files from SolidView/Pro. View STL, SFX, SolidWorks, OBJ, AMF and VRML CAD files. SolidView Features View, measure, modify
More informationAutodesk DirectConnect 2010
Autodesk DirectConnect 2010 Contents Chapter 2 What is Autodesk DirectConnect?................. 3 Supported products and translators.................... 4 Chapter 3 What's new this release......................
More informationSolidView Features List
SolidView 2012.0 Features List SolidView/Lite Features View, measure and modify SVD fi les from SolidView/Pro. View STL, SFX, SolidWorks and VRML CAD fi les. SolidView Features View, measure, modify and
More informationCADdoctor. CADdoctor EX. Product Configuration/Requirements. Product Configuration. Standard Function. Import & Export Options.
CADdoctor Product Configuration/Requirements Version: EX 8.0 Released date: May 8, 2018 Version: SX 4.2 Released date: July 6, 2017 CADdoctor EX Product Configuration Standard Function Product Import &
More informationTetra4D Converter. Version 5.1. Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Converter
Tetra4D Converter Version 5.1 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Converter Table of Contents Version 5.1... 3 Definition of Release Types... 3 Version
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse , G. Wahu
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse 16.10.2018, G. Wahu ABOUT CORETECHNOLOGIE CT is the leading supplier of CAD interoperability software solutions n More than 15 years of
More informationAutodesk Moldflow Adviser AMA Model Import Formats
Autodesk Moldflow Adviser 212 AMA Model Import Formats Revision 1, 16 March 212. Contents Chapter 1 Supported model import formats....................... 1 Supported model import formats................................
More informationSolidView Features List
SolidView 2012.1 Features List SolidView/Lite Features View, measure and modify SVD fi les from SolidView/Pro. View STL, SFX, SolidWorks and VRML CAD fi les. SolidView Features View, measure, modify and
More informationTetra4D Enrich. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Enrich
Tetra4D Enrich Version 2017 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Enrich Tetra4D Enrich 2017 Release Notes 1 Table of Contents Version 2017... 3 Definition
More information3D-Tool Version 10 Manual. 3D-Tool Version 10 - Manual. 3D-Tool GmbH & Co. KG,
3D-Tool Version 10 Manual 3D-Tool Version 10 - Manual www.3d-tool.de Team@3D-Tool.de 3D-Tool V10 Manual Page 2 Contents 1. COMPARISON: FREE VIEWER, BASIC, ADVANCED, AND PREMIUM...5 2. HARDWARE AND SOFTWARE
More informationTetra4D Converter. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Converter
Tetra4D Converter Version 2016 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Converter Table of Contents Version 2016... 2 Definition of Release Types... 2 Version
More informationMULTICAx SE Plug-in Overview What's New? User Tasks Customizing Index
MULTICAx SE Plug-in Overview What's New? User Tasks Requirements Methodologies and Advice Initializing the Environment Importing Data Importing Part Files Interactively 3d com Interoperability:Importing
More informationCREO ENGINEER PACKAGES. 3D CAD solutions optimized for your product development tasks
CREO ENGINEER PACKAGES 3D CAD solutions optimized for your product development tasks From the smallest product design firm to the largest, manufacturing organizations are under constant pressure to develop
More informationThe most robust set of 3D CAD capabilities:
The most robust set of 3D CAD capabilities: 3D Part & Assembly Design Automatic 2D Drawing Creation Parametric & Freestyle Surfacing Assembly Management & Performance Sheet Metal Design Mechanism Design
More informationSolidView Features List
SolidView 2011.1 Features List SolidView/Lite Features View, measure and modify SVD fi les from SolidView/Pro. View STL, SFX, SolidWorks, and VRML CAD files. SolidView Features View, measure, modify and
More informationMULTICAx STEP Plug-in
MULTICAx STEP Plug-in Overview What's New User Tasks Requirements Methodologies and Advice Initializing the Environment Importing STEP Data Importing Part Files Interactively Translating Files from the
More informationMULTICAx IGES Plug-in
MULTICAx IGES Plug-in Overview What's New User Tasks Requirements Methodologies and Advice Initializing the Environment Importing IGES Data Importing Part Files Interactively Translating Files from the
More informationCreo Elements/ Direct Modeling Express
Creo Elements/ Direct Modeling Express Edition Comparison Chart Learn how upgrading to Modeling 18.0, the leading direct 3D CAD design software, can deliver faster design cycles and responsiveness to change
More informationMULTICAx ID Plug-in Overview What's New? User Tasks Customizing Glossary Index
MULTICAx ID Plug-in Overview What's New? User Tasks Requirements Methodologies and Advice Initializing the Initializing the for Indirect Mode Initializing the for Direct Mode with 3d com Importing IDEAS
More informationNX Collaboration and Supplier Exchange. Andy Attfield, Siemens PLM
NX Collaboration and Supplier Exchange Andy Attfield, Siemens PLM Agenda Three Challenges The JT Solution A Day in the Life of AeroKabins GmbH. The Hybrid Solution A Day in the Life of TurboFan-tastic
More informationDesign smarter with powerful, easy-to-use 3D CAD solutions
Creo Parametric Essentials Packages Design smarter with powerful, easy-to-use 3D CAD solutions PTC s 3D CAD product design solution, Creo Parametric, gives you the right tools to achieve the highest quality
More informationFemap v and NX Nastran v9.1
Femap v11.1.2 and NX Nastran v9.1 Technical Seminar for Femap and NX Nastran Users Hosted by: Adrian Jensen, BSME, P.E., Sr Staff Mechanical Engineer George Laird, PhD, PE, Principal Mechanical Engineer
More informationGlovius the innovative 3D CAD Viewer
Price List as of September 1, 2015 Glovius the innovative 3D CAD Viewer All-in-one Pack View, measure, section and compare popular CAD & neutral file formats. CATIA Viewer View, measure, section and compare
More information102_PTC PRODUCT UPDATE FOR PTC CREO ELEMENTS/DIRECT USERS
102_PTC PRODUCT UPDATE FOR PTC CREO ELEMENTS/DIRECT USERS Berthold Hug Product Manager November 2016 PTC Forum Europe Stuttgart, Germany AGENDA 1. CAD and PLM Strategy for Elements/Direct Development Strategy
More information3D-Tool Version 13 Manual. 3D-Tool Version 13 - Manual. 3D-Tool GmbH & Co. KG,
3D-Tool Version 13 Manual 3D-Tool Version 13 - Manual www.3d-tool.de Team@3D-Tool.de 3D-Tool V13 Manual Page 2 Contents 1. COMPARISON: FREE VIEWER, BASIC, ADVANCED, AND PREMIUM... 5 2. HARDWARE AND SOFTWARE
More informationxcompare V5/V5 2.1.x Quick Start Guide
xcompare V5/V5 2.1.x Quick Start Guide This guide helps you getting started with comparing documents with xcompare V5/V5 and analyzing their differences. Basics xcompare recognizes differences between
More informationReadme and update information
hypercad -S Readme and update information Table of Contents 1. hypercad -S is CAD for CAM!... 1 2. Additions to documentation... 2 Release 2018.2 SP1... 2 Release 2018.2... 2 3. Information on direct
More informationDesign for Additive Manufacturing Betatype Capability Demonstration. June 2016
Design for Additive Manufacturing Capability Demonstration June 2016 Contents 1 Manual & Automatic Optimisation 2 Hardware Used 3 Lattice Generation 4-5 Component Validation Random Lattice Structure 6
More informationMULTICAx UD Plug-in Overview What's New? User Tasks Customizing Glossary Index
MULTICAx UD Plug-in Overview What's New? User Tasks Requirements Methodologies and Advice Initializing the Environment Initializing the Environment for Indirect Mode Initializing the Environment for Direct
More informationMULTICAx SolidWorks Plug-in
MULTICAx SolidWorks Plug-in Overview What's New? User Tasks Requirements Methodologies and Advice Initializing the Environment Importing SolidWorks Data Importing Part Files or Assembly Files Interactively
More informationCATIA Teamcenter Interface RII
CATIA Teamcenter Interface RII CMI RII Release 3.1 User Manual Copyright 1999, 2011 T-Systems International GmbH. All rights reserved. Printed in Germany. Contact T-Systems International GmbH PDC PLM Fasanenweg
More informationThe most robust set of 3D CAD capabilities:
The most robust set of 3D CAD capabilities: 3D Part & Assembly Design Automatic 2D Drawing Creation Parametric & Freestyle Surfacing Assembly Management & Performance Sheet Metal Design Mechanism Design
More informationTetra4D Converter/ Tetra4D Reviewer
Tetra4D Converter/ Tetra4D Reviewer Version 2017 SP2 Release Notes Details of new features, updated formats support and bug fixes for Tetra4D Converter Tetra4D Converter 2017 SP2 Release Notes 1 Table
More informationCAD Comparison and Related Technology For Enhanced Digital Workflows
CAD Comparison and Related Technology For Enhanced Digital Workflows Thursday, November 16, 2017 Annalise Suzuki Director of Technology & Engagement Elysium Company Intro 30+ Years of CAD Expertise Strong
More informationOrbiter/External Tank Mate 3-D Solid Modeling
Orbiter/External Tank Mate 3-D Solid Modeling Dr. G.S. Godfrey and B. Brandt College of Technology, Engineering, and Management University of Wisconsin-Stout, Menomonie, WI 54751 D. Rorden College of Engineering
More informationSpaceClaim Professional The Natural 3D Design System. Advanced Technology
SpaceClaim Professional The Natural 3D Design System SpaceClaim Professional is the 3D productivity tool for engineers who contribute to the design and manufacture of mechanical products across a broad
More informationKubotek KeyCreator V8.5 What s New Page 1 of 12. Kubotek KeyCreator V8.5 What s New
Page 1 of 12 Kubotek KeyCreator V8.5 What s New Page 2 of 12 Table of Contents File Management 3 General Interface 4 Detailing/Drawing 5 Modeling 10 Display and Graphics 12 Page 3 of 12 File Management
More informationSOLIDWORKS Visualize 2016 SP1
SOLIDWORKS Visualize 2016 SP1 Release Notes This document provides general information about the SOLIDWORKS Visualize releases. System Requirements Installation Licensing Product Notes Service Pack 1.0
More informationGRANTA MI Materials Gateway for Pro/ENGINEER. Version 1.5. Release Notes. April 2013
GRANTA MI Materials Gateway for Pro/ENGINEER Version 1.5 Release Notes April 2013 Introduction GRANTA MI from Granta Design is the leading materials information management software system for engineering
More informationPTC Creo 3.0 Unite Technology
PTC Creo 3.0 Unite Technology Marc Schuetz PTC Creo Product Management November 20, 2014 Agenda PTC Creo Unite Technology Breakthrough capabilities to improve productivity in Multi-CAD environments Key
More informationHardware Description...P1 Software Description...P2 Additional Information...P3 New Features - v7...p4 New Features - v p5 Fixed Issues...
Thank you for purchasing AP100US CAD/CAM v7.01! These release notes outline the new features or changes in the latest version of the software. These modifications are in response to customer suggestions
More informationDMU Space Analysis Version 5 Release 13. DMU Space Analysis
Page 1 DMU Space Analysis Preface Using This Guide More Information Conventions What's New? Getting Started Setting Up Your Session Measuring Minimum Distances Sectioning Detecting Clashes Measuring Between
More informationData Exchange for Digitalization and the Model Based Enterprise Andy Attfield, Siemens PLM
Data Exchange for Digitalization and the Model Based Enterprise Andy Attfield, Siemens PLM Agenda Three Digitalization Challenges Exchange Format Choices A Day in the Life of TurboFan-tastic Gmbh Exchange
More informationxplm based Integration Aras Innovator and Pro/Engineer
User Guide for the xplm based Integration for Aras Innovator and Pro/Engineer Version 1.0 xplm Solution GmbH Devrientstr. 5 D - 01067 Dresden Fon: +49-351 - 826 58-30 Fax: +49-351 - 826 58-88 @ Email:
More informationAgile Product Lifecycle Management. User Guide
Agile Product Lifecycle Management MCAD Connectors for Agile Engineering Collaboration User Guide V 3.6.0.0 Oracle Part Number E86330-01 June 2017 Copyrights and Trademarks IMPORTANT NOTICE This document
More informationAgile Product Lifecycle Management
Agile Product Lifecycle Management MCAD Connectors for Agile Engineering Collaboration User Guide V3.3.0.0 Oracle Part Number E50822-01 Dezember 2013 Copyrights and Trademarks IMPORTANT NOTICE This document
More informationPTC CREO PARAMETRIC ESSENTIALS PACKAGES. Powerful 3D CAD solutions optimized for your product development tasks. Essentials Packages
PTC CREO PARAMETRIC ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more
More informationLecture 6: CAD Import Release. Introduction to ANSYS Fluent Meshing
Lecture 6: CAD Import 14.5 Release Introduction to ANSYS Fluent Meshing 1 Fluent Meshing 14.5 Assembly meshing Workflow This Lecture Tessellated or Conformal CAD import Cap Inlet/Outlets, Create Domains/BOI
More informationSimulation Model Creation and Assembly Essentials. R2014x
Simulation Model Creation and Assembly Essentials R2014x About this Course Course objectives Upon completion of this course you will be able to: Clean and repair native and imported geometry. Use advanced
More informationPointwise V17.3 New Features. Erick J. S. Gantt Engineering Specialist, Technical Support Nick J. Wyman Director Applied Research
1 Pointwise V17.3 New Features Erick J. S. Gantt Engineering Specialist, Technical Support Nick J. Wyman Director Applied Research 2 Overview New CAE plugins Improved and updated CAD readers Save selection
More informationAutoCAD Civil 3D 2011 ESSENTIALS
AutoCAD Civil 3D 2011 ESSENTIALS SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Table of Contents Table of Contents Preface...ix Module 1 The AutoCAD Civil 3D Interface... 1-1
More informationAgile Product Lifecycle Management
Agile Product Lifecycle Management MCAD Connectors for Agile Engineering Collaboration User Guide V3.1.0.0 Oracle Part Number E38571-01 December 2012 Copyrights and Trademarks IMPORTANT NOTICE This document
More informationTransMagic Read/Write Formats + Versions. Table of Contents. SUPERVIEW Read Formats.. Page 2 SUPERVIEW Write Formats. Page 3
TransMagic Read/Write Formats + Versions As of June 16, 2016, Version 12.01.200 Table of Contents SUPERVIEW Read Formats.. Page 2 SUPERVIEW Write Formats. Page 3 PRO Read Formats Page 4 PRO Write Formats..
More informationUSER GUIDE. 3DEXPERIENCE CATIA V6 Creo View Release Version : 20.2 Revision: 1.0 Issued: 15/01/2018
USER GUIDE 3DEXPERIENCE CATIA V6 Creo View Release Version : 20.2 Revision: 1.0 Issued: 15/01/2018 THEOREM SOLUTIONS 2018 Contents Overview of Visualise 3D About Theorem Theorem Solutions is a world leader
More informationFeature and Topology Detection
Feature and Topology Detection Greater possibilities with Capvidia extension and PARTsolutions Cadenas Industry Forum February 5th, 2015 Thomas Tillmann Capvidia GmbH Agenda Company Overview Application
More informationTest Suite for the CAD work package of the STEP AP242 Benchmark #2
Test Suite for the CAD work package of the STEP AP242 Benchmark #2 February 2016 October 2016 April 15th, 2016 Contacts Kevin Le Tutour Boost Conseil 30 rue de Miromesnil 75008 Paris /France kevin.letutour@boost-conseil.com
More informationCreo Elements/Pro Advanced XE
Creo Elements/Pro Advanced XE EXTENDED 3D CAD POWER PLUS DATA MANAGEMENT Formerly Pro/ENGINEER Improve your productivity with solutions that meet your needs. The Creo Elements/Pro Advanced XE (Extended
More informationTetra4D Converter. Version 5.1. User Guide. Details on how to use Tetra4D Converter
Tetra4D Converter Version 5.1 User Guide Details on how to use Tetra4D Converter Table of Contents Chapter 1: Getting started... 6 Help... 6 Installation and activation... 7 Installation of Acrobat Pro
More informationRadan Release Notes Radan 2016
Radan Release Notes Radan 2016 This information package contains an overview of changes introduced in the Radan 2016 issue of software. If you have any questions relating to the changes made, please contact
More information2D CAD. Courseware Issued: DURATION: 64 hrs
2D CAD Introduction File management Orthographic drawings View management Display management Layer management Selection methods Parametric drawings Symbol creation using block BOM / Joinery details creation
More informationWindchill Arbortext IsoDraw
Windchill Arbortext IsoDraw Produce professional, CAD-linked illustrations fast employing a single, easy-to-use solution. Speed the process of creating and updating high-quality technical illustrations
More informationInstallation Guide. Installation Guide Edgecam 2019 R1 Page 1 of 22
Installation Guide This document contains information to help you install and start Edgecam. You will find information about system requirements, product installation and troubleshooting. To run Edgecam,
More informationRelease Notes. KeyView Filter SDK. Contents. Version Revision 0
R E L E A S E N O T E S KeyView Filter SDK Version 10.23 Release Notes Revision 0 This document describes new features and resolved issues for KeyView Filter SDK 10.23. You can retrieve the latest available
More informationPTC Technical Specialists E-Newsletter Date: December 1, 2006
PTC Technical Specialists E-Newsletter Date: December 1, 2006 PTC Product Focus: A) What s New in Sheetmetal Design for Wildfire 3.0 B) Windchill 3 rd Party Workgroup Managers Tips of the Month: A) Creating
More informationVisualize 3D for CATIA V5i to CreoView. Product Release Version USER GUIDE Revision: 1.0 Issued: 23/05/2016
Visualize 3D for CATIA V5i to CreoView Product Release Version 19.2 USER GUIDE Revision: 1.0 Issued: 23/05/2016 THEOREM SOLUTIONS 2016 Contents Overview of Visualize 3D... 3 About Theorem...3 What is Visualize
More information6th JT Application Benchmark SHORT REPORT
ProSTEP ivip/vda JT Application Benchmark 6th JT Application Benchmark SHORT REPORT JT Application Benchmark TABLE OF CONTENTS Contents Table of Contents 3 Disclaimer 4 Copyright 4 1 Introduction 5 2 Approach
More information2016 inn In ovatint SYSTEM novatint version 3 REQUIREMENTS System Requirements D ate :
2016 Innovatint innovatint version SYSTEM 3 System REQUIREMENTS Requirements Date: 28-11-2016 Table of contents 1. Innovatint P.O.S 2 1.1 Minimal system requirements 2 1.2 Recommended system requirements
More informationInstallAnywhere: Requirements
InstallAnywhere: Requirements Create Multiplatform Installations from a Single Project File Physical, Cloud, and Virtual Environments, Plus Docker Containers Requirements This document shows the technical
More informationRENDERING Hardware agnostic, biased, interactive wysiwyg raytracing using NVIDIA i
RENDERING Hardware agnostic, unbiased, interactive wysiwyg pathtracing using NVID Hardware agnostic, biased, interactive wysiwyg raytracing using NVIDIA i Hardware agnostic, high quality, interactive wysiwyg
More informationGeomagic Verify. First-Article Inspection and Portable Metrology Platform. Release Notes
Geomagic Verify First-Article Inspection and Portable Metrology Platform Release Notes Software: Geomagic Verify Version 2015.2.0 Release Date: May 2015 TABLE OF CONTENTS 1 INTRODUCTION 1 COPYRIGHT 1 2
More information201 9 Iin n n n o o v v a a t tiin n t t S v Y e S rstie o M n 3 R S E ysq t U e IR m E R M eq E un ir T e S ments Da t e :
2019 Innovatint innovatint version SYSTEM 3 System REQUIREMENTS Requirements Date: 18-01-2019 Table of contents 1. Innovatint P.O.S 2 1.1 Minimal system requirements 2 1.2 Recommended system requirements
More informationRelease Notes. Release Date: March, 2018
Release Notes Release Date: March, 2018 Software: Geomagic Design X Version 2016.2.1 TABLE OF CONTENTS 1 INTRODUCTION 1 COPYRIGHT 1 2 INSTALLATION 2 SYSTEM REQUIREMENTS 2 DOWNLOAD AND INSTALL SOFTWARE
More informationWhat s New R1
- Contents General/System 3 New InstallShield Wizard >>...3 SURFCAM 2014- Recommended System Requirements >>...4 Utilities 5 New Support Assistant >>...5 Functionality 6 Improved Layer Control >>...6 Enhanced
More informationCATIA Teamcenter Interface RII
CATIA Teamcenter Interface RII CMI RII Release 2.2 User Manual Copyright 1999, 2010 T-Systems International GmbH. All rights reserved. Printed in Germany. Contact T-Systems International GmbH Solution
More informationCADfix 10 SP2 Data Exchange Fix Change Notes
CADfix 10 SP2 Data Exchange Fix Change Notes Change Notes for CADfix 10 SP2 as a brief summary of each fix arranged under their respective Problem report number(s): 7961 Parasolid imported Toroid Face
More informationCATIA Teamcenter Interface
CATIA Teamcenter Interface CMI Release 10.2 Functional Overview (Change History) Copyright 2000, 2012 T-Systems International GmbH. All rights reserved. Printed in Germany. Contact T-Systems International
More informationELYSIUM - Global Interoperability Provider
ELYSIUM - Global Interoperability Provider Enabling the Digital Thread James Martin Director of Business Development NSRP Digital Shipbuilding June 2015 Digital Thread, Tapestry, etc. The digital thread
More informationPresentation at ProSTEP Symposium 2010
Presentation at ProSTEP Symposium 2010 Winfried Weber, T-Systems International GmbH April 28, 2010 COM/FOX enables high end applications of JT and PLMXML This presentation describes a case study based
More informationPTC Technical Specialists E-Newsletter Date: August 1, 2007
PTC Technical Specialists E-Newsletter Date: August 1, 2007 PTC Product Focus: A) Pro/TOOLMAKER Tips of the Month: B) ProjectLink Role Configuration A) Expert Machinist Less is More Announcements: Most
More information2D/3D CAD data Festo PARTdataManager
2D/3D CAD data Festo PARTdataManager Festo PARTdataManager 2D/3D CAD data now even faster and easier Reduced workload thanks to 2D/3D CAD data for more than 33,000 products. The utilised CAD technology
More informationDr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami
What is CADD? Computer-aided drawing is a technique where engineering drawings are produced with the assistance of a computer and, as with manual drawing, is only the graphical means of representing a
More information