Industrial Computed Tomography
|
|
- Dale Benson
- 6 years ago
- Views:
Transcription
1 Industrial Computed Tomography YXLON International YXLON. The reason why 1
2 CT - applications YXLON. The reason why 2
3 CT - principles Computed Tomography (Line Detector) YXLON. The reason why 3
4 CT - principles Zählrate Detektorkanäle absorption profile sinogram reconstructed image YXLON. The reason why 4
5 CT - principles stack of 2D images volume data YXLON. The reason why 5
6 CT - principles Computed Tomography (Flat Panel) YXLON. The reason why 6
7 CT - principles set of projections volume data YXLON. The reason why 7
8 CT - applications Vizualization / NDT / geometrical measurement PU foam Al foam Al foam/ steel compound YXLON. The reason why 8
9 CT - applications NDT Aluminum casting YXLON. The reason why 9
10 CT - applications Visualization tool for injection moulding YXLON. The reason why 10
11 CT - applications Geometrical measurement cylinder/crank case YXLON. The reason why 11
12 CT - applications Visualization Sandstone sculpture (Cathedral of Mainz) YXLON. The reason why 12
13 CT - applications NDT casting defect in cylinder/crank case YXLON. The reason why 13
14 CT - applications NDT heater plug YXLON. The reason why 14
15 CT - applications NDT welding seam YXLON. The reason why 15
16 CT - applications Vizualization / NDT ceramic sphere YXLON. The reason why 16
17 CT - applications Vizualization / NDT cylinder head YXLON. The reason why 17
18 CT - applications Vizualization / NDT mounted device YXLON. The reason why 18
19 CT - applications Vizualization / NDT / geometrical measurement truck tire YXLON. The reason why 19
20 CT - applications 2D images or volume data polygon extraction (STL model) surface reconstruction (CAD model) - defect analysis - position control - geometrical measuring - nominal/actual comparison - rapid prototyping - FE simulations nominal/actual comparison CAD model YXLON. The reason why 20
21 CT - applications nominal/actual actual value comparison YXLON. The reason why 21
22 CT - applications solidification simulation YXLON. The reason why 22
23 CT - applications Reverse Engineering Reproduction of a cylinder head (1937 model) YXLON. The reason why 23
24 CT - systems General remarks resolution vs. object size YXLON. The reason why 24
25 CT - systems Small for objects with < 220 mm Ø < 500 mm height < 15 kg Line detector array < 50μm pitch < 1% contrast resolution (available with Flat-Panel) 225 kv Minifocus X-ray source (available with Microfocus) 4-axis high accuracy manipulator (+/- 10 µm) YXLON. The reason why 25
26 CT - systems Compact for objects with < 335 mm Ø < 500 mm height < 30 kg Line detector array 120 μm / 0.5% or Flat-Panel 400 µm / 1 % kv X-ray source 5-axis high load manipulator (+/- 50 µm) YXLON. The reason why 26
27 CT - systems Medium for objects with < 525 / 900 mm Ø < 1,000 mm height < 150 kg Line detector array 100 μm pitch 0.1% contrast resolution 450 kv X-ray source 225 kv Minifocus 5-axis high load manipulator (+/- 50 µm) YXLON. The reason why 27
28 CT - systems Medium for objects with < 525 / 900 mm Ø < 1,200 mm height < 50 kg Line detector array (100 μm / 0.1%) and Flat-Panel (400 µm / 1 %) 450 kv X-ray source 6-axis high accuracy manipulator (+/- 25 µm) YXLON. The reason why 28
29 CT - systems Large for objects with < 800 / 1300 mm Ø < 1,500 mm height < 350 kg Line detector array 600 μm pitch (250 µm available) 0.5% contrast resolution 2.5 MeV linear accelerator 5-axis high load manipulator (+/- 50 µm) YXLON. The reason why 29
30 CT - systems Detector-Capabilities for geometrical measurement YXLON. The reason why 30
31 CT - systems Comparison low energy appl. Line detector array 170 kv Aluminum YXLON. The reason why 31
32 CT - systems Comparison low energy appl. Flat Panel 170 kv Aluminum YXLON. The reason why 32
33 CT - systems Comparison dynamic range YXLON. The reason why 33
34 CT - systems Comparison high energy appl. Line detector array 450 kv Aluminum YXLON. The reason why 34
35 CT - systems Comparison high energy appl. Flat Panel 450 kv Aluminum YXLON. The reason why 35
36 CT - principles Computed Tomography (3D-CT) YXLON. The reason why 36
37 CT - systems Comparison LDA vs. Flat Panel speed spatial resolution contrast resolution detectability Visualization NDT geometrical measurement reverse engineering YXLON. The reason why 37
38 CT - systems Capabilities YXLON-CT-systems are usable for any material (as long as absorbing) any object (as long as penetrable) any application (as far as thinkable) YXLON-CT-systems are used with LDA (2D-CT) or FlatPanel(3D-CT) or both combined Micro-, Mini-, Macro-X-ray sources Radioisotopes, Linear accelerators on-top-equipment YXLON. The reason why 38
39 CT - systems Features YXLON-CT-systems are optimized for high performance (speed, resolution) high throughput (in-line reconstruction) high accuracy (manipulation) high reliability (industrial design, remote service) YXLON-CT-systems include easy-to-use operator interface 3D-visualization image analysis & measurement tools open interfaces YXLON. The reason why 39
40 YXLON International X-Ray GmbH YXLON. The reason why 40
Industrial Computed Tomography Innovations
GE Inspection Technologies Industrial Computed Tomography Innovations Premium performance for premium quality and speed. gemeasurement.com/ct Premium CT technologies. Faster than ever before. Every industrial
More informationHIGH RESOLUTION COMPUTED TOMOGRAPHY FOR METROLOGY
HIGH RESOLUTION COMPUTED TOMOGRAPHY FOR METROLOGY David K. Lehmann 1, Kathleen Brockdorf 1 and Dirk Neuber 2 1 phoenix x-ray Systems + Services Inc. St. Petersburg, FL, USA 2 phoenix x-ray Systems + Services
More informationAdvanced Non-Destructive Testing by High Resolution Computed Tomography for 3D analysis of Automotive Components
Advanced Non-Destructive Testing by High Resolution Computed Tomography for 3D analysis of Automotive Components J. Luebbehuesen GE Sensing & Inspection Technologies GmbH, phoenix x-ray, Niels-Bohr-Str.
More informationY.Cougar Series Compact and versatile X-ray solutions for 2D and 3D microfocus inspection
Y.Cougar-En-1 16.07.2009 9:46 Uhr Seite 1 YXLON.Products BookholtXray.com 201-394-2449 Y.Cougar Series Compact and versatile X-ray solutions for 2D and 3D microfocus inspection Continuous miniaturization
More informationWieblinger Weg 92a, Heidelberg, Germany, Phone: , Fax: ;
HOW INDUSTRIAL COMPUTER TOMOGRAPHY ACCELERATES PRODUCT DEVELOPMENT IN THE LIGHT METAL CASTING AND INJECTION MOULDING INDUSTRY. Christof REINHART 1, Christoph POLIWODA 1, Thomas GÜNTHER 1 1 Volume Graphics
More informationDigital Laminography and Computed Tomography with 600 kv for Aerospace Applications
4th International Symposium on NDT in Aerospace 2012 - Tu.3.A.1 Digital Laminography and Computed Tomography with 600 kv for Aerospace Applications Malte KURFISS 1, Gerd STRECKENBACH 2 1 YXLON International
More informationCT in Dimensional Metrology, Engineering and Manufacture
CT in Production Quality Control - Leuven, June 4, 2013 CT in Dimensional Metrology, Engineering and Manufacture Prof. Dr. Ir. Jean-Pierre KRUTH Katholieke Universiteit Leuven (K.U.Leuven) Mechanical Engineering
More informationDr. Javier Santillan, San Carlos, CA
X-ray diffraction as a tool for automated residual st ress analysis & a non-synchrotron based nanofocus x-ray computed tomography technique for materials characterization and metrology Dr. Javier Santillan,
More informationAdvanced Computed Tomography System for the Inspection of Large Aluminium Car Bodies
ECNDT 2006 - Th.3.4.2 Advanced Computed Tomography System for the Inspection of Large Aluminium Car Bodies M. SIMON, I. TISEANU, C. SAUERWEIN Hans WÄLISCHMILLER, Meersburg, Germany M. SINDEL, M. BRODMANN,
More informationJapan Foundry Society, Inc. Application of Recent X-ray CT Technology to Investment Casting field. Kouichi Inagaki ICC / IHI Corporation
Japan Foundry Society, Inc. Application of Recent X-ray CT Technology to Investment Casting field Kouichi Inagaki ICC / IHI Corporation 13 th WORLD CONFERENCE ON INVESTMENT CASTING Paper: T3 Copyright
More informationAM INSPECTION / NDT: IS XCT THE SOLUTION?
AM INSPECTION / NDT: IS XCT THE SOLUTION? Dr. Nick Brierley Principal Research Engineer Metrology & NDT Group nick.brierley@the-mtc.org April 2018 OUTLINE Challenges of AM post-build inspection XCT for
More informationMULTI-PURPOSE 3D COMPUTED TOMOGRAPHY SYSTEM
MULTI-PURPOSE 3D COMPUTED TOMOGRAPHY SYSTEM M. Simon, C. Sauerwein, I. Tiseanu, S. Burdairon Hans Wälischmiller GmbH Klingleweg 8, D-88709 Meersburg, Germany e-mail: ms@hwm.com ABSTRACT A new flexible
More informationX-rays see all X-ray computed microtomography (µct) a novel technique available at CERN for material and metrological inspection
X-rays see all X-ray computed microtomography (µct) a novel technique available at CERN for material and metrological inspection Mariusz Jedrychowski EN/MME-MM Introduction of new technique at CERN 12/12/2017
More informationOptiv CT160 Accurate measurement for every detail. Computed Tomography System
Optiv CT160 Accurate measurement for every detail Computed Tomography System Computed Tomography CT Technology. New prospects for metrology. Computed tomography (CT), a technology with unique advantages,
More informationCIVA Computed Tomography Modeling
CIVA Computed Tomography Modeling R. FERNANDEZ, EXTENDE, France S. LEGOUPIL, M. COSTIN, D. TISSEUR, A. LEVEQUE, CEA-LIST, France page 1 Summary Context From CIVA RT to CIVA CT Reconstruction Methods Applications
More informationAdvanced automated High Speed Computed Tomography for production process control. DGZfP 2011, Bremen
DGZfP-Jahrestagung 2011 - Mo.3.B.3 Advanced automated High Speed Computed Tomography for production process control DGZfP 2011, Bremen Dr. Ingo Stuke* and Dr. Oliver Brunke** GE Sensing & Inspection Technologies
More informationAdvanced Reconstruction Techniques Applied to an On-Site CT System
2nd International Symposium on NDT in Aerospace 2010 - We.1.A.4 Advanced Reconstruction Techniques Applied to an On-Site CT System Jonathan HESS, Markus EBERHORN, Markus HOFMANN, Maik LUXA Fraunhofer Development
More informationMethods for Quantitative Characterization of Large-Scale High Energy Computed Tomography Systems
More Info at Open Access Database www.ndt.net/?id=16704 Methods for Quantitative Characterization of Large-Scale High Energy Computed Tomography Systems Michael BÖHNEL 1, Andreas GRUBER 2, Nils REIMS 1,
More informationCoordinate Measuring Machines with Computed Tomography
Always a Step Ahead with Quality Coordinate Measuring Machines with Computed Tomography Multisensor Coordinate Measuring Machines with Computed Tomography Computed Tomography in Coordinate Measuring Machines
More informationMCT225 HA Metrology CT
MCT225 HA Metrology CT Absolute accuracy for inside metrology nikon metrology I vision beyond precision Today, manufacturers are seeking to reduce time-to-market, despite a greater variety of products
More informationEvaluation of Computed Tomography Techniques for Material Identification in Low Level and Intermediate Level Waste
Evaluation of Computed Tomography Techniques for Material Identification in Low Level and Intermediate Level Waste. 16648 Stephen Halliwell, VJ Technologies Inc, 89 Carlough Road, Bohemia, NY 11716, USA.
More informationCT Reconstruction with Good-Orientation and Layer Separation for Multilayer Objects
17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China CT Reconstruction with Good-Orientation and Layer Separation for Multilayer Objects Tong LIU 1, Brian Stephan WONG 2, Tai
More informationComputed Tomography & 3D Metrology Application of the VDI/VDE Directive 2630 and Optimization of the CT system
Computed Tomography & 3D Metrology Application of the VDI/VDE Directive 2630 and Optimization of the CT system ECNDT 2014 Prague October 6-10, 2014 Dr. Eberhard Neuser Dr. Alexander Suppes Imagination
More informationComputerized Tomography for Industrial Applications and Image Processing in Radiology March 15-17, 1999, Berlin, Germany
DGZfP Proceedings BB 67-CD Paper 10 Computerized Tomography for Industrial Applications and Image Processing in Radiology March 15-17, 1999, Berlin, Germany COMPUTED TOMOGRAPHY IN THE AUTOMOTIVE FIELD.
More informationY.Fox High precision 2D & 3D µct X-ray solution for high quality microfocus inspection
YXLON.Products Y.Fox High precision 2D & 3D µct X-ray solution for high quality microfocus inspection Continuous miniaturization and increasing quality and reliability demands drive the need for high resolution
More informationA new Concept for High-Speed atline and inlinect for up to 100% Mass Production Process Control
6 th International Congress of Metrology, 06003 (203) DOI: 0.05/ metrology/20306003 C Owned by the authors, published by EDP Sciences, 203 A new Concept for High-Speed atline and inlinect for up to 00%
More informationCase Studies in the Use of Computed Tomography for Non-Destructive Testing, Inspection and Measurement
SINCE2013 Singapore International NDT Conference & Exhibition 2013, 19-20 July 2013 Case Studies in the Use of Computed Tomography for Non-Destructive Testing, Inspection and Measurement Andrew A. MALCOLM,
More informationThe new generation of industrial computed tomography. The Desktop CT exact S
The new generation of industrial computed tomography The Desktop CT S Volume scanning technology Innovation with a family tradition Founded in 1968, the family-owned, WEN- ZEL Metrology Group is one of
More informationTraceable 3D X-Ray Measurements ZEISS METROTOM
20 Traceable 3D X-Ray Measurements With a computer tomograph, you can successfully perform measuring and inspection jobs yourself with only one X-ray scan. The standard acceptance test, the precision engineering
More informationRobot-based real-time ultrasonic tomography for industrial NDT applications
1 Robot-based real-time ultrasonic tomography for industrial NDT applications Dr. Andrey Bulavinov I-Deal Technologies GmbH 2 Content I. Introduction of I-Deal Technologies GmbH I-Deal Spin-Off of Fraunhofer-IZFP
More informationXT H 225 Industrial X-ray and Computed Tomography
XT H 225 Industrial X-ray and Computed Tomography nikon metrology I vision beyond precision Get the inside picture of complex industrial parts, by literally looking into the internal structure. Then use
More information3D Computed Tomography (CT) Its Application to Aerospace Industry
3D Computed Tomography (CT) Its Application to Aerospace Industry C. Muralidhar, M. P. Subramanian, V. Ravi Shankar and G. Chandrasekhar Directorate of Non Destructive Evaluation, Defence Research & Development
More informationA Large Scale Multiple Source X-ray CT System for Aerospace Applications
5th International Symposium on NDT in Aerospace, 13-15th November 2013, Singapore A Large Scale Multiple Source X-ray CT System for Aerospace Applications Andrew A. MALCOLM, Tong LIU, Ivan Kee Beng NG,
More informationPhase-Contrast Imaging and Tomography at 60 kev using a Conventional X-ray Tube
Phase-Contrast Imaging and Tomography at 60 kev using a Conventional X-ray Tube T. Donath* a, F. Pfeiffer a,b, O. Bunk a, W. Groot a, M. Bednarzik a, C. Grünzweig a, E. Hempel c, S. Popescu c, M. Hoheisel
More informationCombining Analytical and Monte Carlo Modelling for Industrial Radiology
19 th World Conference on Non-Destructive Testing 2016 Combining Analytical and Monte Carlo Modelling for Industrial Radiology Carsten BELLON, Gerd-Rüdiger JAENISCH, Andreas DERESCH BAM Bundesanstalt für
More informationA new Concept for High-Speed atline and inlinect for up to 100% Mass Production Process Control
18th World Conference on Nondestructive Testing, 16-20 April 2012, Durban, South Africa A new Concept for High-Speed atline and inlinect for up to 100% Mass Production Process Control Oliver BRUNKE 1,
More information3D-COMPUTED TOMOGRAPHY OVER FOUR ORDERS OF MAGNITUDE OF X-RAY ENERGIES
3D-COMPUTED TOMOGRAPHY OVER FOUR ORDERS OF MAGNITUDE OF X-RAY ENERGIES J. Goebbels, B. Illerhaus, Y. Onel, H. Riesemeier, G. Weidemann Federal Institute for Materials Research and Testing (BAM), Berlin,
More informationApplication of 450 kv Computed Tomography to Engine Blocks with Steel Liners
Application of 450 kv Computed Tomography to Engine Blocks with Steel Liners Charles R. Smith, Kevin Holt BIR, Inc. Uwe Bischoff, Bernd Georgi, Ferdinand Hansen, Frank Jeltsch Volkswagen Commercial Vehicles
More informationQuality control phantoms and protocol for a tomography system
Quality control phantoms and protocol for a tomography system Lucía Franco 1 1 CT AIMEN, C/Relva 27A O Porriño Pontevedra, Spain, lfranco@aimen.es Abstract Tomography systems for non-destructive testing
More informationThe new generation of industrial computed tomography. The CT workstation exact M
The new generation of industrial computed tomography The CT workstation M Volume scanning technology Innovation with a family tradition Founded in 1968, the family-owned, WEN- ZEL Metrology Group is one
More informationHigh Resolution Phased Array Imaging using the Total Focusing Method
High Resolution Phased Array Imaging using the Total Focusing Method S. Kierspel, Wolfram A. Karl Deutsch, Helge Rast, Philippe Benoist 1, Venkat A 2 KARL DEUTSCH Pruef- und Messgeraetebau GmbH + Co KG
More informationProcess Monitoring using Three Dimensional Computed Tomography and Automatic Image Processing
ECNDT 2006 - We.3.7.1 Process Monitoring using Three Dimensional Computed Tomography and Automatic Image Processing Michael MAISL, Fraunhofer EZRT, Saarbrücken, Germany Stefan KASPERL, STEVEN OEKL, Fraunhofer
More informationComparison of Reconstruction Methods for Computed Tomography with Industrial Robots using Automatic Object Position Recognition
19 th World Conference on Non-Destructive Testing 2016 Comparison of Reconstruction Methods for Computed Tomography with Industrial Robots using Automatic Object Position Recognition Philipp KLEIN 1, Frank
More informationRoger Wende Acknowledgements: Lu McCarty, Johannes Fieres, Christof Reinhart. Volume Graphics Inc. Charlotte, NC USA Volume Graphics
Roger Wende Acknowledgements: Lu McCarty, Johannes Fieres, Christof Reinhart Volume Graphics Inc. Charlotte, NC USA 2018 Volume Graphics VGSTUDIO MAX Modules Inline Fiber Orientation Analysis Nominal/Actual
More informationY.Cougar Series Compact and versatile X-ray solutions for 2D and 3D microfocus inspection
YXLON.Products Y.Cougar Series Compact and versatile X-ray solutions for 2D and 3D microfocus inspection Continuous miniaturization and increasing quality and reliability demands drive the need for high
More informationInvestigating the influence of workpiece placement on the uncertainty of measurements in industrial computed tomography
Investigating the influence of workpiece placement on the uncertainty of measurements in industrial computed tomography Natalia Grozmani 1, Andrea Buratti 1, Robert H. Schmitt 1 More info about this article:
More informationCharacterization of microshells experimented on Laser Megajoule using X-Ray tomography
Characterization of microshells experimented on Laser Megajoule using X-Ray tomography More info about this article: http://www.ndt.net/?id=20881 Alexandre Choux, Lise Barnouin, Ludovic Reverdy, Marc Theobald
More informationOptiCon X-Line 3D. Combined 3D X-ray and Optical Inspection at Production Line Pace
OptiCon X-Line 3D Combined 3D X-ray and Optical Inspection at Production Line Pace 1470 mm Automated X-Ray Inspection (AXOI) OptiCon X-Line 3D: AXI and AOI teamed up High-Speed X-Ray System for Maximum
More informationDelayline Detectors. Imaging Detection of Electrons, Ions & Photons with Picosecond Time Resolution. e - I +
Delayline Detectors Imaging Detection of Electrons, Ions & Photons with Picosecond Time Resolution e - I + Delayline Readout of MCPs - The Technical Approach - Microchannel-Plate (MCP) detectors provide
More informationNEW. Very high-speed profile measurement for industrial in line applications. 2D/3D profile sensor SENSORS & SYSTEMS
SENSORS & SYSTEMS SENSORS & SYSTEMS By far the better solution PRINCIPLE NEW 28 Very high-speed profile measurement for industrial in line applications. High accuracy and very high frame frequency thanks
More informationReconstruction Methods for Coplanar Translational Laminography Applications
Reconstruction Methods for Coplanar Translational Laminography Applications U. EWERT, K.-U. THIESSENHUSEN, A. DERESCH, C. BELLON, S. HOHENDORF, S. KOLKOORI, N. WROBEL, B. REDMER, M. TSCHAIKNER, BAM, Berlin
More informationLaser profile sensor, laser scanner 2D/3D for beads and grooves
Laser profile sensor, laser scanner 2D/3D for beads and grooves Industrial laser profile sensor, 2D/3D laser scanner for fast CMOS profile measurement and laser line for beads and grooves, dimension, position
More informationXRADIA microxct Manual
XRADIA microxct Manual Multiscale CT Lab Table of Contents 1. Introduction and Basics 1.1 Instrument Parts 1.2 Powering up the system 1.3 Preparing your sample 2. TXM Controller 2.1 Starting up 2.2 Finding
More information3D X-ray Microscopy Characterization. Metal Additively Manufactured Parts. Application Note
3D X-ray Microscopy Characterization Metal Additively Manufactured Parts Application Note 3D X-ray Microscopy Characterization Metal Additively Manufactured Parts Author: Luke Hunter ZEISS X-ray Microscopy
More information17th World Conference on Nondestructive Testing, Oct 2008, Shanghai, China
7th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Image Registration Combining Digital Radiography and Computer-Tomography Image Data Frank HEROLD YXLON International X-Ray
More informationPotentials of Full-Vehicle CT Scans within the Automotive Industry
19 th World Conference on Non-Destructive Testing 2016 Potentials of Full-Vehicle CT Scans within the Automotive Industry Gina Alessandra CILIBERTI 1, Philipp JANELLO 1, Peter JAHNKE 1, Lennart KEUTHAGE
More informationComparison of Probing Error in Dimensional Measurement by Means of 3D Computed Tomography with Circular and Helical Sampling
nd International Symposium on NDT in Aerospace - We..A. Comparison of Probing Error in Dimensional Measurement by Means of D Computed Tomography with Circular and Helical Sampling Jochen HILLER, Stefan
More informationRecognition and Measurement of Small Defects in ICT Testing
19 th World Conference on Non-Destructive Testing 2016 Recognition and Measurement of Small Defects in ICT Testing Guo ZHIMIN, Ni PEIJUN, Zhang WEIGUO, Qi ZICHENG Inner Mongolia Metallic Materials Research
More informationELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code
ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare
More informationAdapted acquisition trajectory and iterative reconstruction for few-views CT inspection
Adapted acquisition trajectory and iterative reconstruction for few-views CT inspection Caroline Vienne 1, Marius Costin 1 More info about this article: http://www.ndt.net/?id=21917 1 CEA, LIST, Département
More informationProcess Monitoring using three dimensional Computed Tomography and Automatic Image Processing
DIR 2007 - International Symposium on Digital industrial Radiology and Computed Tomography, June 25-27, 2007, Lyon, France Process Monitoring using three dimensional Computed Tomography and Automatic Image
More informationDeep Scatter Estimation (DSE): Accurate Real-Time Scatter Estimation for X-Ray CT using a Deep Convolutional Neural Network
Deep Scatter Estimation (DSE): Accurate Real-Time Scatter Estimation for X-Ray CT using a Deep Convolutional Neural Network Joscha Maier 1,2, Stefan Sawall 1,2, and Marc Kachelrieß 1,2 1 German Cancer
More informationNon-Destructive Failure Analysis and Measurement for Molded Devices and Complex Assemblies with X-ray CT and 3D Image Processing Techniques
SINCE2013 Singapore International NDT Conference & Exhibition 2013, 19-20 July 2013 Non-Destructive Failure Analysis and Measurement for Molded Devices and Complex Assemblies with X-ray CT and 3D Image
More informationA new concept for high-speed atline and inline CT for up to 100% mass production process control allowing both 3D metrology and failure analysis
A new concept for high-speed atline and inline CT for up to 100% mass production process control allowing both 3D metrology and failure analysis Oliver Brunke 1, Ferdinand Hansen 2, Ingo Stuke 3, Friedrich
More informationProduct Information Version 1.1. ZEISS Xradia 510 Versa Submicron X-ray Imaging: Maintain High Resolution Even at Large Working Distances
Product Information Version 1.1 ZEISS Xradia 510 Versa Submicron X-ray Imaging: Maintain High Resolution Even at Large Working Distances Breakthrough Flexibility for 3D Submicron Imaging Achieve new levels
More informationIntroduction to XCT and its growth
Introduction to XCT and its growth Professor Richard Leach FInstP FIoN Engineering Measurement Division Measurement Network Meeting, Loughborough April 2012 X-ray computed tomography History X-ray were
More informationHigh-resolution X-ray CT Inspection of Honeycomb Composites Using Planar Computed Tomography Technology
2nd International Symposium on NDT in Aerospace 2010 - We.4.B.4 High-resolution X-ray CT Inspection of Honeycomb Composites Using Planar Computed Tomography Technology Tong LIU, Andrew A. MALCOLM, and
More informationComputed Tomography for Industry Needs and Status Umesh Kumar
Computed Tomography for Industry Needs and Status Umesh Kumar Bhabha Atomic Research Centre, Mumbai, INDIA Industrial Computed Tomography (ICT) Needs Why industrial tomography is required when many conventional
More informationAn Acquisition Geometry-Independent Calibration Tool for Industrial Computed Tomography
4th International Symposium on NDT in Aerospace 2012 - Tu.3.A.3 An Acquisition Geometry-Independent Calibration Tool for Industrial Computed Tomography Jonathan HESS *, Patrick KUEHNLEIN *, Steven OECKL
More informationCombination of non-destructive test methods for damage documentation of monuments
Combination of non-destructive test methods for damage documentation of monuments Color & Space in Cultural Heritage (COSCH) WG 2: Spatial object documentation Mainz, 27.03.2013 Fraunhofer Institute for
More informationInvestigation on reconstruction methods applied to 3D terahertz computed Tomography
Investigation on reconstruction methods applied to 3D terahertz computed Tomography B. Recur, 3 A. Younus, 1, P. Mounaix 1, S. Salort, 2 B. Chassagne, 2 P. Desbarats, 3 J-P. Caumes, 2 and E. Abraham 1
More informationVoid Detection in Large Solder Joints of Integrated Power Electronics. Patrick Schuchardt Goepel electronics LLC
Void Detection in Large Solder Joints of Integrated Power Electronics Patrick Schuchardt Goepel electronics LLC What are power electronics Solid-state electronic devices which control and convert electric
More informationOptiCon X-Line 3D: AXI and AOI teamed up
OptiCon X-Line 3D Combined 3D X-ray and Optical Inspection at Production Line Pace 1470 mm Automated X-Ray Inspection (AXI) OptiCon X-Line 3D: AXI and AOI teamed up High-Speed X-Ray System for Maximum
More informationDEVELOPMENT OF CONE BEAM TOMOGRAPHIC RECONSTRUCTION SOFTWARE MODULE
Rajesh et al. : Proceedings of the National Seminar & Exhibition on Non-Destructive Evaluation DEVELOPMENT OF CONE BEAM TOMOGRAPHIC RECONSTRUCTION SOFTWARE MODULE Rajesh V Acharya, Umesh Kumar, Gursharan
More informationLength, Singapore, NMC, A*STAR (National Metrology Centre, Agency for Science, Technology and Research)
Calibration or m 633 633 nm 0.5 MHz 2 95% No LS/L/001 633 633 nm 0.016 fm 2 95% No LS/L/003 474 474 THz 12 khz 2 95% No LS/L/003 543 633 nm 0.0016 fm 2 95% No LS/L/003 553 474 THz 1.2 khz 2 95% No LS/L/003
More informationPhase problem and the Radon transform
Phase problem and the Radon transform Andrei V. Bronnikov Bronnikov Algorithms The Netherlands The Radon transform and applications Inverse problem of phase-contrast CT Fundamental theorem Image reconstruction
More informationINVESTIGATION OF MEASURING STRATEGIES IN COMPUTED TOMOGRAPHY
NEWTECH 2011 NEW TECHNOLOGIES IN MANUFACTURING ISBN 978-80-214-4267-2 INVESTIGATION OF MEASURING STRATEGIES IN COMPUTED TOMOGRAPHY Pavel Müller, Jochen Hiller, Angela Cantatore, Leonardo De Chiffre Technical
More informationTHE INSIDE VIEW IN THIS ISSUE INTRODUCING: CUSTOM M8000 X5000 X500 X50 IMAGIX. Portfolio Includes: and CT Product. NSI S X-ray
100% 3D Computed Tomography Inspection on the Production Line North Star Imaging, Inc. (NSI) is excited to announce the industry s first ever Inline X-ray Computed Tomography (CT) system. This system brings
More informationT-SCAN 3 3D DIGITIZING
T-SCAN 3 3D DIGITIZING 2 T-SCAN 3: THE HANDHELD LASER SCANNER Launching the innovative concept of an intuitive-to-use high-precision laser scanner a few years ago, Steinbichler Optotechnik, as the first
More informationIndustrial Computer Tomography for Dimensional Metrology: Overview of Influence Factors and Improvement Strategies
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Industrial Computer Tomography for Dimensional Metrology: Overview of Influence Factors and
More informationRadiographic Simulator artist: Version 2
18th World Conference on Nondestructive Testing, 16-20 April 2012, Durban, South Africa Radiographic Simulator artist: Version 2 Carsten Bellon 1, Andreas Deresch 1, Christian Gollwitzer 1, Gerd-Rüdiger
More information3Shape Convince D Scanning and Quality Control
3Shape Convince 2011 3D Scanning and Quality Control About 3Shape Digitally moving the world of 3D scanning and 3D software Global provider of innovative 3D technology Established in 2000 in Copenhagen,
More informationVolume Data Inspection Tools for Industrial Computed Tomography
Volume Data Inspection Tools for Iustrial Computed Tomography Youngjun Kim 1, Wontae Kim, Jin hyeok Choi 1, Tae-geun Son 1, Seungbin Lee, a Kunwoo Lee 1 1 Human-Centered CAD Lab., Seoul National University,
More informationSee Beyond the Surface. CT Scanning Redefining Industrial Metrology
See Beyond the Surface CT Scanning Redefining Industrial Metrology Table of Contents Table of Contents 1. What is Computed Tomography (CT) Scanning? 2. How CT Scanning Works 3. Advantages of CT Scanning
More informationTomographic X-ray data of a walnut
Tomographic X-ray data of a walnut arxiv:1502.04064v1 [physics.data-an] 11 Feb 2015 K. Hämäläinen, L. Harhanen, A. Kallonen, A. Kujanpää, E. Niemi and S. Siltanen February 16, 2015 Abstract This is the
More informationScienceDirect. Comparison of Different Method of Measurement Geometry using CMM, Optical Scanner and Computed Tomography 3D
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 69 (2014 ) 255 262 24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013 Comparison of Different
More informationMetal Artifact Reduction for Multi-Material Objects
Metal Artifact Reduction for Multi-Material Objects Bärbel Kratz 1,#, Frank Herold 1, Malte Kurfiß 1, Thorsten M. Buzug 2 1 YXLON International GmbH, Essener Bogen 15, 22419 Hamburg, Germany, e-mail: baerbel.kratz@hbg.yxlon.com,
More informationLABORATORY SYSTEM FOR X-RAY NANOTOMOGRAPHY
79 LABORATORY SYSTEM FOR X-RAY NANOTOMOGRAPHY Alexander Sasov, SkyScan, Vluchtenburgstraat 3, Aartselaar B2630, Belgium, www.skyscan.be. ABSTRACT Using advanced X-ray technologies and X-ray scattering
More informationMéthodes d imagerie pour les écoulements et le CND
Méthodes d imagerie pour les écoulements et le CND Journée scientifique FED3G CEA LIST/Lab Imagerie Tomographie et Traitement Samuel Legoupil 15 juin 2012 2D/3D imaging tomography Example Petrochemical
More information3D X-ray Laminography with CMOS Image Sensor Using a Projection Method for Reconstruction of Arbitrary Cross-sectional Images
Ke Engineering Materials Vols. 270-273 (2004) pp. 192-197 online at http://www.scientific.net (2004) Trans Tech Publications, Switzerland Online available since 2004/08/15 Citation & Copright (to be inserted
More informationPorosity and Pore-Size Distribution of Geomaterials from X-Ray CT Scans
Porosity and Pore-Size Distribution of Geomaterials from X-Ray CT Scans Hyu-Soung Shin & Kwang-Yeom Kim Geotechnical Eng. Research Division, Korea Institute of Construction Technology (KICT), South Korea
More informationComputer-Tomography I: Principles, History, Technology
Computer-Tomography I: Principles, History, Technology Prof. Dr. U. Oelfke DKFZ Heidelberg Department of Medical Physics (E040) Im Neuenheimer Feld 280 69120 Heidelberg, Germany u.oelfke@dkfz.de History
More informationMore Precision. surfacecontrol // Inspection of diffusely reflecting surfaces
More Precision surfacecontrol // Inspection of diffusely reflecting surfaces 2 Surface inspection with fringe projection surfacecontrol Industrial surface inspection 3 Requirements High quality finished
More informationY.Cougar Compact and versatile X-ray solutions for 2D and 3D microfocus inspection
YXLON.Products Y.Cougar Compact and versatile X-ray solutions for 2D and 3D microfocus inspection Continuous miniaturization and increasing quality and reliability demands drive the need for high resolution
More informationLaminographic Inspection of Large Carbon Fibre Composite Aircraft-Structures at Airbus
19 th World Conference on Non-Destructive Testing 2016 Laminographic Inspection of Large Carbon Fibre Composite Aircraft-Structures at Airbus Oliver BULLINGER 1, Ulf SCHNARS 2, Daniel SCHULTING 1, Bernhard
More informationFast Z-stacking 3D Microscopy Extended Depth of Field Autofocus Z Depth Measurement 3D Surface Analysis
MICROSCOPE 3D ADD-ON FAST PRECISE AFFORDABLE 3D ADD-ON FOR MICROSCOPY Fast Z-stacking 3D Microscopy Extended Depth of Field Autofocus Z Depth Measurement 3D Surface Analysis Compatible With Transmitted
More informationThe Electrochemical Innovation Lab X-ray Suite: from macro- to nano-ct
The Electrochemical Innovation Lab X-ray Suite: from macro- to nano-ct Dr. Francesco Iacoviello, Toby Neville & the Electrochemical Innovation Lab f.iacoviello@ucl.ac.uk MANIFEST - 2017 November 10 th,
More informationDevelopments in Dimensional Metrology in X-ray Computed Tomography at NPL
Developments in Dimensional Metrology in X-ray Computed Tomography at NPL Wenjuan Sun and Stephen Brown 10 th May 2016 1 Possible factors influencing XCT measurements Components Influencing variables Possible
More information2018 Technical Review Waruna Seneviratne, John Tomblin, and Supun Kariyawasam
Analytical Fatigue Life Determination based on Residual Strength Degradation of Composites Damage Tolerance Testing and Analysis Protocols for Full-Scale Composite Airframe Structures under Repeated Loading
More informationFraunhofer Entwicklungszentrum Röntgentechnik, EZRT
Fraunhofer Entwicklungszentrum Röntgentechnik, EZRT Intelligent Sensor Systems for Nondestructive Testing regarding Product Life Cycle 2. Kolloquium des GRK 2075 Braunschweig 5. 6. Oktober 2017 Randolf
More information