NANO-TREND Thickness/Measurement/System
|
|
- Frederica Jefferson
- 6 years ago
- Views:
Transcription
1 NANO-TREND Thickness/Measurement/System Flat Film/Sheet Thickness Measurement System (Page1~4) Blow Film Thickness Measurement System (Page5~8)
2 Flat Film Money Saving & Thickness Measurement System ON-LINE THICKNESS MEASUREMENT SYSTEM NON-CONTACT NON-RADIATION APPLICATION FOR: film, sheet, foil, profile, multi-layer ADVANTAGE: Quality record. Quality report. Easy for T-die thickness adjustment. Any time, to know the thickness change. APPLICATION: T-die Extrusion,Calender,Coating,Printing,Textile,CPP,BOPP... MATERIAL: PLA, PET, PS, TPU, PVC, BOPP, RUBBER... THICKNESS RANGE : 1μm to 50mm, Depend on thickness range to use different system. Application for : PVC film Industrial Packaging Backlight Module Plastic Packaging Light diffuse plate Battery spacer Printing thickness Coating thickness 1
3 Flat Film Principle and Specification: UM series Ultrasonic sensor, both on material up/ down side, to measure mass. Thickness=Mass x N * No radiation. * Good stability for temperature & humidity change. * No influenced by color, transparent. * It can measure electric conduct material. * Measure film, foil, coating. * Resolution: 1/ 1000 thickness( down to μm) *Combination accuracy :1/100 thickness(down to 0.01μm) *Measurement range:1 to 500 gm/sqm. MDL series Double laser sensors, both on material up/down side, to measure L1,L2. Laser to laser, the distance is L. Thickness=L- L1- L2. * Good stability for temperature & humidity change. * No influenced by color, transparent. * It can measure electric conduct material. * It can measure combination material and form sheet. *Resolution: 0.1μm. * Repeatability: ±5μm. *Measurement range:0.1 to 50mm. MEO series M sensor only sensitive to metal, to measure A value. L sensor, by laser shadow to measure B value. Thickness=A- B * No radiation. * Good stability for temperature & humidity change. * No influenced by color, transparent. * It can measure electric conduct material. *Resolution:0.1 μm. * Repeatability: ±5μm. *Measurement range:0.05 to 8 mm. MEC-R series M sensor only sensitive to metal, to measure A value. P sensor sensitive to any material, to measure B value. Thickness=A- B * No radiation. * Good stability for environment temperature / humidity change * No influenced by color, transparent, * No suit for electric conduct material. *Resolution:0.1 μm. * Repeatability: ±1μm. *Measurement range:0.01 to 5mm. MEC-P series MF sensor only sensitive to mass. To measure value. * No radiation. * Good stability for environment temperature / humidity change * No influenced by color, transparent, * No suit for electric conduct material. *Resolution:0.1 μm. * Repeatability: ±1μm. *Measurement range:0.01 to 5mm. 2
4 Flat Film We use different technology to meet your solution. Measurement System T-die PET sheet measurement. Printing thickness measurement. PS foam sheet measurement. Solid sheet measurement. Our experience, after customer bought one, they will buy more for old machine, and of course, new machine, they must be install. 3
5 Flat Film Software function: Auto/manual measurement. Receipt management, save/load. Die bolt position/thickness display. Cross section profile display, record. Operator name,code,duty,password record/management. Alarm setting. Modify record. Tolerance setting. Trend profile display. Material output display. Average thickness display. Print. The advantage to use thickness measurement system: General save material 3 to 5%. Decrease material thickness adjustment time. Easy to adjust die bolt. Easy to control the thickness tolerance and quality. Stabilize the quality. Continue monitor the thickness. Decrease engineer pressure and fast accumulate the experience. 100% on-line inspection, for ISO trace. Improvement the thickness deviation. Enhance company quality reputation. Material saving: PS, 1 Kg is 1.8 USD. The machine is 300 Kg/h output. 1 day, 300X1.8X24=12960 USD. After use thickness measurement machine, 3% material saving. Day saving X 3%=388.8 USD. Month saving USD. Half year is USD You get a Mercedes Benz E-class FREE. Benz E-class Half year, win! 4
6 Blow Film Money Saving & Thickness Measurement System edge measurement Width measurement Measurement on A frame (haul-off, collapsing) Measurement on scanner 10 μm film, thickness measurement result μm film, thickness measurement result
7 Blow Film BF-A A-frame thickness measurement system: Measurement head install on A frame(haul-off, collapsing). For machine type: 1.rotate die. 2.no rotate die, but A frame rotate. Specification: Resolution:0.1μm Repeatability:±1% or ±0.5μm Measurement range:10 ~ 300μm (other thickness inquiry) Feature: 1.air cushion measurement head, no damage film surface. (Optional) 2.set data/display profile on note book(nb), it's easy to move the NB to any place of machine side. 3.by die rotate, or A frame rotate, pass 2 times zero point position, get circle profile. A-frame measurement BF-E edge thickness measurement system: Measurement head install on layflat edge, by C frame to measurement. For machine type: 1.rotate die. 2.no rotate die, but A frame rotate. Specification: Resolution:0.1μm Repeatability:±1% or ±0.5μm Measurement range:5 ~ 1000μm (other thickness inquiry) Feature: 1.big gap design,no contact the film, no damage film surface. 2.special design for sticky film measurement. 3.set data/display profile on NB, it's easy to move the NB to any place of machine side. 4.by die rotate, or A frame rotate, pass 2 times zero point position, get circle profile. 6 edge measurement width measurement
8 Blow Film BF-S scanner thickness measurement system: Measurement head install on scanner, surround bubble to measurement. For machine type: 1.no rotate die, also no rotate A frame. 2.no rotate die, A frame rotate, but too long time for A frame rotate. Specification: Resolution:0.1μm Repeatability:±1% or ±0.5μm Measurement range:10 ~ 300μm (other thickness inquiry) Feature: 1.air cushion measurement head, no damage film surface. 2.set data/display profile on IPC, it's easy to move the (Optional) IPC to any place of machine side. 3.about 1~3 minutes, IPC can get a circle profile. Scanner measurement BF-T offline thickness measurement system Contact gauge + Thickness measurement sensor Specification: Resolution:0.3μm Repeatability:±1% or ±0.5μm Measurement range:5 ~ 500μm (other thickness inquiry) Measurement length:900 ~ 5400mm (other length inquiry) Feature: Easy to calibration Easy to measurement Easy to show the profile Easy to use offline thickness measurement 7
9 Blow Film Software function: Auto measurement, display circle/line thickness profile. Tolerance/Alarm display. Die bolt position/angle display Average thickness display. Cycle average thickness display. 10 cycle thickness display. History data record. The advantage to use thickness measurement system: General save material 3 to 5%. Decrease material thickness adjustment time. Easy to adjust die bolt. Easy to control the thickness tolerance and quality. Stabilize the quality. Continue monitor the thickness. Decrease engineer pressure and fast accumulate the experience. 100% on-line inspection, for ISO trace. Improvement the thickness deviation. Enhance company quality reputation. Material saving: PE, 1 Kg by 1.5 USD to calculate. The machine is 200 Kg/h output. 1 day, material cost 200 X 1.5 X 24=7200 USD. After use thickness measurement machine, 3% material saving. Day saving 7200 X 3%=216 USD. Month saving 6480 USD. 1 year is USD. You get a Mercedes Benz E-class FREE. Benz E-class 1 year, win! 8
10 Blow Film Nano-Meter, 10-9meter(1/1,000,000,000 meter). In future scientific technology field, from nanometer's technology and view point can solve mostly the technical task now., means more precision, more tiny, more density, more efficiency, more intelligence... technology Co., Ltd. is a company for customer Measurement/Automation task solution provider. We supply high-end sensor/parts/controller/instrument/equipment to satisfy customer's requirement. We're welcome inquiry the relation question, and hope have a chance to grow with you. In technology company, we distribute and manufacture the top level of the technology field's products to meet customer's "" requirement. In Germany,has an animal in legend.the name is "WOLPERTINGER". It gets all the advantages of exist animals in the world. It can fly, it can swim, it can fast move on road..., it can do everything. In some cases, we hope we have ability like WOLPERTINGER, but service for your Measurement/Automation requirement. OUR SALES/SERVICE VIEW POINT Measurement/Automation tasks are no standard answer. Each task, depend on the speed, resolution, accuracy, installation, space, acceptable cost..., then become different. But, if base on open mind, and detail discussion, also according the continue accumulated experience and use the new innovation technology, usually, the "By Far The Best Solution" will appear. On Measurement/Automation, on-line quality control, it must be an important topic right now and in the future. We are quite honesty on the business and honesty on technology, honesty on customer's requirement, honesty on product ability, honesty on suggestion, sales, service. We are glad to share our experience with you, together to the "". 9
11 Blow Film 10
12 NANO-TREND Technology Co.,Ltd. NTE1403 CONTACT: Technology Co., Ltd. Address : No.365-6, Zhongshan Rd., Sanxia Dist., New Taipei City 237, Taiwan (R.O.C.) T E L : F a x : nt@nano-trend.com Web : We keep the right for specification change.
KÜNDIG CONTROL SYSTEMS The Gauge Manufacturer for Film Extrusion SWISS MADE. Offline Thickness Measurement System. Filmtest
KÜNDIG CONTROL SYSTEMS Filmtest Offline Thickness Measurement System TQM and process optimization with the Filmtest The Filmtest is an offline film thickness measuring system that can be used for quality
More informationFilmtest 3G. Offline Thickness Gauge for Process Optimization and Quality Control
KÜNDIG CONTROL SYSTEMS SWISS The Gauge Manufacturer for Film Extrusion MADE Offline Thickness Gauge for Process Optimization and Quality Control KÜNDIG CONTROL SYSTEMS SWISS The Gauge Manufacturer for
More informationFOCALSPEC 3D LINE CONFOCAL SCANNER UULA DID THEY TELL YOU THAT NO-ONE CAN MEASURE IT? WE CAN.
FOCALSPEC 3D LINE CONFOCAL SCANNER UULA DID THEY TELL YOU THAT NO-ONE CAN MEASURE IT? WE CAN. FocalSpec 3D Line Confocal Scanner UULA UULA is an automated optical 3D imaging and metrology system for sub-micron
More informationDML 6000 Inline Thickness Measurement with Laser Technology NEW: NOW AVAILABLE WITH CARBON FRAME
DML 6000 Inline Thickness Measurement with Laser Technology NEW: NOW AVAILABLE WITH CARBON FRAME Inline Thickness Measurement for Quality and Production Assurance Fluctuations in thickness and deviations
More informationUULA FOCALSPEC 3D LINE CONFOCAL SCANNER DID THEY TELL YOU THAT NO-ONE CAN MEASURE IT? WE CAN.
FocalSpec builds optical sensors to measure and inspect the quality of the advanced materials and devices in use today and currently in development for the future. Our sensors combine 3D topography, 3D
More informationThe BF200 Blown Film Gauge. SolveTech, Inc.
The BF200 Blown Film Gauge SolveTech, Inc. Agenda About SolveTech How It Works About the BF200 See It Work Data Collection Summary About SolveTech Founded in 1981 by Doug Lawrence Headquarters and Manufacturing
More informationCG700 Coating thickness gauges
CG700 CG700 Coating thickness gauges 2 www.innovatest-europe.com Features Correct readings with interference free measurement with precise evaluation through SIDSP Extended field of application through
More informationD-510 PISeca Single-Electrode Capacitive Sensor Probe
Technical Note BSc, BRo, D-510 PISeca Single-Electrode Capacitive Sensor Probe Fig. 1: D-510 Single-Electrode Capacitive Sensor probe with E-852.10 signal conditioner electronics The D-510 Single-Electrode
More informationB R E A T H A L Y S E R
BREATHALYSER Congratulations on buying your new Wingmate Pro breathalyser. We hope you enjoy owning your Wingmate Pro breathalyser. If you have any questions regarding the unit or want to speak with us
More informationNARROW-WEB IN LINE FLEXO PRINTING IN THE FLEXIBLE PACKAGING MARKET
NARROW-WEB IN LINE FLEXO PRINTING IN THE FLEXIBLE PACKAGING MARKET Narrow-Web Flexible Packaging Summit 2017 November 9th Ι APR Chicago Ι USA Dario De Meo, Bobst Firenze www.bobst.com NARROW-WEB IN LINE
More informationData sheet deltwavec-f
deltawavec vec-f Data sheet deltwavec-f 1- Channel, 2- Channel, Ex Ultrasonic clamp-on flowmeter for liquids Lindberghstrasse 4, 82178 Puchheim Telefon 089-80906-0, Telefax 089-80906-200 http://www.systec-controls.de
More informationThermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
More informationi-hydro 7900 Water Vapor Transmission Rate Testing System
i-hydro 7900 Water Vapor Transmission Rate Testing System Online Data Management System for Packaging Testing- The ultimate cloud computing technology for test data processing and management Designed with
More informationUser's Guide. Extech CG204 Coating Thickness Tester. 99 Washington Street Melrose, MA Phone Toll Free
User's Guide 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Extech CG204 Coating Thickness Tester [NO ALRRM] Introduction Congratulations
More informationEXPLORER CLASSIC BRIDGE COORDINATE MEASURING MACHINE PRODUCT BROCHURE
EXPLORER CLASSIC BRIDGE COORDINATE MEASURING MACHINE PRODUCT BROCHURE EXPLORER CLASSIC UNSURPASSED MEASURING RANGE Available in sizes to suit every kind of business, Explorer Classic machines combine innovative
More informationElcometer 456 Integral Coating Thickness Gauge
http://www.btmco.ir Elcometer 456 Integral Coating Thickness Gauge The new Elcometer 456 makes measuring coating thickness faster, reliable and accurate. Over 60 years of product design experience has
More informationi-gastra 7200 Gas Permeability Tester
i-gastra 7200 Gas Permeability Tester Online Data Management System for Packaging Testing-The ultimate cloud computing technology for test data processing and management Designed with embedded computer
More informationNon-Contact Measurement for the Aluminum Industry WIDTH THICKNESS FLATNESS SURFACE.
THE GLOBAL WORLD LEADER MARKET IN LEADER NON-CONTACT IN MEASURING MEASURING SYSTEMS SYSTEMS Non-Contact Measurement for the Aluminum Industry WIDTH THICKNESS FLATNESS SURFACE www.imssystemsinc.com Taking
More informationInstruction Manual Mobile digital Leeb Impact Hardness Tester
Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@sauter.eu Tel.: +49-[0]7433-9933-199 Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Mobile digital Leeb Impact Hardness Tester
More informationBENCHMIKE 283 SERIES. Off-Line ID/OD/Wall measurement systems for pipe and tube samples
BENCHMIKE 283 SERIES Off-Line ID/OD/Wall measurement systems for pipe and tube samples Measure manufactured parts or cut samples fast and with the highest accuracy Perform reliable, non-contact measurements
More informationO P E R A T I O N A L MEGA-CHECK POCKET COATING THICKNESS METER M A N U A L
O P E R A T I O N A L MEGA-CHECK POCKET COATING THICKNESS METER M A N U A L TECHNICAL DATA Measuring Technique: Magnetic induction on iron and steel (ISO 2178) for MEGA-CHECK Pocket FE/FN Eddy current
More informationDual Type Coating Thickness Tester LZ-990. Operating Manual
Dual Type Coating Thickness Tester LZ-990 Operating Manual Coating Thickness Tester Safety Precautions The Coating Thickness Tester may cause damage to objects being handled if the precautions are not
More informationUSER GUIDE. Coating Thickness Tester. Model CG104
USER GUIDE Coating Thickness Tester Model CG104 Introduction Thank you for selecting the Extech Instruments CG104 Coating Thickness Tester. The CG104 is a portable meter designed for non invasive coating
More informationBENCHMIKE 283 SERIES. BETA LaserMike. Off-Line ID/OD/Wall measurement systems for pipe and tube samples
BENCHMIKE 283 SERIES Off-Line ID/OD/Wall measurement systems for pipe and tube samples Measure manufactured parts or cut samples fast and with the highest accuracy Perform reliable, non-contact measurements
More informationmicro-gloss The new intelligence in gloss measurement Brilliant color display: easy to read - easy to use Auto diagnosis: Standard OK - Calibration OK
micro-gloss The new intelligence in gloss measurement The micro-gloss has been the unsurpassed industry standard in gloss measurement for many years. It is the only glossmeter combining the highest accuracy,
More informationSwitch on / off. For switching off please press button for approx. 5 sec.
DUC-MP Quickstart A User Interface: Switch on / off. For switching off please press button for approx. 5 sec. Activates the background lighting To navigate through the different menus please use the keys
More informationDry Film Thickness - Digital
Elcometer 456 Coating Thickness Gauge Specialised probes to meet a wide range of applications, see page 11 Integral and Separate gauges to measure coatings up to 31mm (1220mils) Dust and waterproof rugged
More informationActive Yield Management: New Trends in Advanced Optical Disc Production Rolf W. Hertling, Hongda Yue
White paper Active Yield Management: New Trends in Advanced Optical Disc Production Rolf W. Hertling, Hongda Yue 1. Introduction Today, the market of optical disc is developing to new formats. The old
More informationAll-in-one RGB liquid cooler with excellent price-performance ratio
All-in-one RGB liquid cooler with excellent price-performance ratio INTRODUCTION The advantages of a pre-filled, closed loop or all-in-one (AIO) liquid cooler are the convenience of installation and improved
More informationClear Benefits of the KRAL Electronic.
Clear Benefits of the KRAL Electronic. Coordinated to the flowmeters and their applications. Users of conventional universal display units often cannot make use of their device s options. There is often
More informationThe Blown Film Extrusion Process
The Blown Film Extrusion Process Labtech Blown Film Attachment LF-400 LF-250 Attached to a 25 mm single-screw extruder Attached to a benchtop single-screw extruder Features of the Labtech Blown FilmAttachment
More informationTQC FE/NFE COATING THICKNESS GAUGE LD0800
TQC FE/NFE COATING THICKNESS GAUGE LD0800 1 PRODUCT DESCRIPTION This handy, robust and easy to use TQC coating thickness gauge is ideal for measurement tasks in various industries and paint applications.
More informationWingmate Rover Components
Congratulations on your new Wingmate Rover breathalyser. We hope you enjoy owning your Wingmate Rover breathalyser. If you have any questions regarding the unit or want to speak with us further, please
More informationANEMOMETER DIGITAL ANEMOMETER AM-4812
ANEMOMETER DIGITAL ANEMOMETER AM-4812 Model:AM4812 Measuring: wind speed 0.4-30.0m/s 1.4-108.0km/h 80-5910ft/min 0.8-59.3 knots Accuracy: ±2%n+2d Resolution:0.1/1 Display: LCD display Power supply:1x9v
More informationquick start manual GPS-ENABLED SPORTS WATCH
quick start manual F O R E R U N N E R 2 1 0 GPS-ENABLED SPORTS WATCH Important Information warning Always consult your physician before you begin or modify any exercise program. See the Important Safety
More informationMinimum < 0.2 ms, maximum 2 ms, typical 1 ms; On request: Delays or holding times for bubble events % relative humidity (not condensing)
The air bubble detector is used to detect air or gas bubbles in plastic tubes filled with liquid and is intended to prevent air infusions. However, it can also be used as a wet/dry sensor. The sensor has
More informationSuperfast Optical Roughness Measurement
SORM 3plus Superfast Optical Roughness Measurement online contactless laser-optical SORM 3plus Superfast Optical Roughnes Operating principle SORM 3plus (SORM = Superfast Optical Roughness Measurement)
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-1056 Valid Until Last Amended on - Page 1 of 8. 0.
Last Amended on - Page 1 of 8 I. MASS 1. Weights (Conventional) $ 1 mg 0.020 mg F2 Class Standard Weights 2 mg 0.020 mg and Mass Comparator 5 mg 0.021 mg (Readability: 0.001/0.01 10 mg 0.022 mg mg) Calibration
More informationwww.industrial-needs.com PCE Americas Inc. 711 Commerce Way Suite 8 Jupiter FL-33458 USA From outside US: +1 Tel: (561) 320-9162 Fax: (561) 320-9176 info@pce-americas.com PCE Instruments UK Ltd. Units
More informationAdvancing with Technology
Advancing with Technology Coating Thickness Measurement MiniTest 7400 High-precision coating thickness gauge for non-destructive measurements on all metal substrates convenient graphics display with numerous
More informationM-545 Manual XY Microscope Stage For Olympus, Nikon, Leica & Zeiss Microscopes / PI Piezo Stages
M-545 Manual XY Microscope Stage For Olympus, Nikon, Leica & Zeiss Microscopes / PI Piezo Stages M-545 manual microscopy stages are designed to accommodate the P-545 PInano series of XY / XYZ Piezo stag
More informationOperation Manual. MODEL ph/ec80. Microcomputer Based ph/condctivity/tds/ Sanility & Temperature Pocket Meter. ph/ec80
Operation Manual MODEL ph/ec80 Microcomputer Based ph/condctivity/tds/ Sanility & Temperature Pocket Meter ph/ec80 CONTENTS INITIAL INSPECTION AND ASSEMBLY...2 BEFORE YOUR FIRST USE......2 A. Replace the
More informationOperation Manual. MODEL ph6175. Microcomputer Based ph/orp/temperature Benchtop Meter
Operation Manual MODEL ph6175 Microcomputer Based ph/orp/temperature Benchtop Meter ph6175 0 CONTENTS GENERAL INTRODUCTION...2 INITIAL INSPECTION......2 POWER INPUT.......2 INSTALLING THE BATTERIES.....3
More informationquick start manual GPS-ENABLED SPORTS WATCH
quick start manual F O R E R U N N E R 2 1 0 GPS-ENABLED SPORTS WATCH Important Information warning Always consult your physician before you begin or modify any exercise program. See the Important Safety
More informationCase study: Bringing 3D Printed Electronics into Mass Production Lessons Learned
Case study: Bringing 3D Printed Electronics into Mass Production Lessons Learned Mike O Reilly Optomec, Inc. Henrik Johansson LiteON Mobile Mechanical About Optomec Leader in Printed Electronics and Additive
More informationUSB, PS/2 (auto-select) or SUN Systems (see section 8 for ordering code details)
DS13001 X13 Series 13mm Laser Trackball, Panel Mount, Protocol Output 1. DESCRIPTION Utilizing the latest and most advanced laser tracking technology, the X13 series laser Trackerball is an extremely high
More informationComplete Barrel Measuring and Inspection System. PS Series. User s manual
Complete Barrel Measuring and Inspection System PS Series User s manual SAFETY PRECAUTIONS... 3 ELECTROMAGNETIC COMPATIBILITY... 3 LASER SAFETY... 3 GENERAL INFORMATION... 3 BASIC DATA AND PERFORMANCE
More informationFor Immediate Release D R. Joseph, Inc. Introduces the New 3rd Generation IS-IBC1 Control System
D. R. Joseph INCORPORATED When You Need Solutions Not Just Answers For Immediate Release D R. Joseph, Inc. Introduces the New 3rd Generation IS-IBC1 Control System D.R. Joseph, Incorporated is proud to
More informationSOLIDWORKS SIMULATION
SOLIDWORKS SIMULATION Innovation is about taking chances, not taking risks Scootchi by Curventa Designworks LTD What if? is the question that fuels innovation. SolidWorks Simulation software takes the
More informationOTS-400 Series Optical Sources, Meters, Testers and Kits with Data Storage Capabilities A LANscape Solutions Product
Applications Testing and troubleshooting of various telecommunication networks Description The Corning Cable Systems OTS-400 Series of intelligent and versatile optical meters, sources and testers offers
More informationAqua-C Waterproof Conductivity-TDS- Temperature Meter
[Add this page to the Navigation view to display hyperlinks here] [Add this page to the navigation structure to display a page banner here] TPS Australia - Quality instruments since 1968. Aqua-C Waterproof
More informationNANOMETRIC LAB PRINTER. Plug & Play Solution for ultra-precise printing of conductive lines in nano-scale
NANOMETRIC LAB PRINTER Plug & Play Solution for ultra-precise printing of conductive lines in nano-scale WHO ARE WE? WHAT IS OUR SOLUTION? XTPL S.A. is a company operating in the nanotechnology segment.
More informationLiquiDens. SensoTech. Process density meter for liquids Product description
SensoTech LiquiDens Process density meter for liquids Product description SensoTech GmbH, Steinfeldstraße 3, D-39179 Magdeburg-Barleben Tel +49 39203 961300, Fax +49 39203 961309, Internet www.sensotech.com
More informationThe World s Smallest Displacement Sensor!!
Compact laser displacement sensor Series FASTUS is new product brand name from Optex-FA The World s Smallest Displacement!! Innovative size! Built-in controller Performance Fits in any machine 4 Digit
More informationModel LE-200C/LH-200C/LZ-200C Coating Thickness Testers. Operation Manual
Model LE-200C/LH-200C/LZ-200C Coating Thickness Testers Operation Manual Contents 1. Features... 1 2. Specifications... 2 3. Measurement Principles... 3 4. Part Names and Functions... 4 5. The Keyboard...
More informationCoating Thickness Tester
USER GUIDE Coating Thickness Tester With Bluetooth Model CG304 Introduction Congratulations on your purchase of the Extech CG304 Coating Thickness Tester. The CG304 is a portable meter designed for non
More informationPInano 1x3 XYZ & XY Piezo Stage Systems
New: Large Aperture for Slides, Petri Dishes, Heaters & Specimen Holders PInano 1x3 XYZ & XY Piezo Stage Systems Low-Profile, Low-Cost, Nanopositioning Systems for Super-Resolution Microscopy PInano series
More informationInstruction Manual Ultrasonic Thickness gauge DC3020
Instruction Manual Ultrasonic Thickness gauge DC3020 V 7.11 CONTENTS 1.General Description... - 1-2.Technical Specifications... - 1-3. Standard Delivery... - 2-4. Overview the Display Unit... - 2-5. Keypad
More informationMiniature Thru-beam Sensors
Model SM400 Series MICROSONIC Miniature Thru-beam Sensors Ideal for small object detection Extremely reliable thrubeam sensing in an extremely small package with a range up to 205 mm (8") The miniature
More informationOperation Manual. Hand-held Conductivity/Salinity/TDS/ Temperature Meter 3010M
Operation Manual Hand-held Conductivity/Salinity/TDS/ Temperature Meter 3010M CONTENTS GENERAL INTRODUCTION...2 INITIAL INSPECTION......2 WATER PROOF.......2 INSTALLING THE BATTERIES.....3 DISPLAY & KEYS
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationCyberGage360 3D SCANNERS. One-Button Automation for 3D Scan Inspection.
CyberGage360 One-Button Automation for 3D Scan Inspection. 3D SCANNERS Unprecedented speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection. Powered by MRS Technology
More informationIMS Messsysteme GmbH Heiligenhaus
IMS Messsysteme GmbH Heiligenhaus Quality Data Management and Control in a Integrated Steel Plant Dipl.-Ing. Horst Krauthäuser Agenda What is Quality? Quality Management System MEVInet-Q MEVInet-Q QData
More informationSPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
More informationDPL4000 Portable Low Range Dew Point Analyzer
OPERATIONS MANUAL DPL4000 Portable Low Range Dew Point Analyzer 7205 Edington Drive / Cincinnati, OH 45249 / Tel (513) 772-0060 / Fax (513) 772-9466 Page #1 of 16 M4581 DPL4000 Product Description: This
More informationModel ST-618. Instruction Manual. Digital Thermo-Anemometer. Digital Measurement Metrology, Inc PRECISION IS OUR VISION
Model ST-618 Digital Thermo-Anemometer Instruction Manual Table of Contents Features... 2 Specifications... 3 Instrument Description... 4 Operating Instructions...4-5 Measuring Wind Velocity...4 Measuring
More informationCI-150 Series. Airborne Particle Counters
CI-150 Series The CLiMET CI-150 series of full-featured airborne particle counters are the smallest, lightest and fastest counters with unsurpassed ease of use. It is the smallest and lightest 1.0 CFM
More informationPrecision digital pressure gauge Model CPG1500
Calibration technology Precision digital pressure gauge Model CPG1500 WIKA data sheet CT 10.51 for further approvals see page 4 Applications Oil and gas industry Maintenance and service facilities Calibration
More informationMaterial Testing Machine
JINAN TIANCHEN TESTING MACHINE MANUFACTURING CO., LTD Address: No.66 Kaiyuan Road, Licheng District, Jinan City, Shandong Province, China. Zip ode: 250101 Tel: +86-531-88608888 Fax: +86-531-88607888 Web:
More informationTable of Contents. Chapter 1 Introduction Chapter 2 Quick Install... 7
AVA-88 WELCOME Congratulations on purchasing the AVA-88. The AVA-88 integrates multiple complicated control, automation and internet protocols into one simple plug-and-play device. It is a central controller
More informationNon-Contact Thickness Measurement
Non-Contact Thickness Measurement It's Our Business to be Exact! Reliable accuracy and exceptional repeatability for the most demanding thickness testing applications. Applications CONTACT AND INTRAOCULAR
More informationIntroduction. Power-up / Power-down
Introduction The PowderSave XP is a hand-held, non-contact Coating Thickness Gauge that uses an airborne high frequency ultrasound to analyze coating powder applied to rigid substrates to calculate and
More informationUnit 5.C Physical Optics Essential Fundamentals of Physical Optics
Unit 5.C Physical Optics Essential Fundamentals of Physical Optics Early Booklet E.C.: + 1 Unit 5.C Hwk. Pts.: / 25 Unit 5.C Lab Pts.: / 20 Late, Incomplete, No Work, No Units Fees? Y / N 1. Light reflects
More informationDigital Coating Thickness Gauge Model No
250 Gibbs Road Islandia NY 11749 Digital Coating Thickness Gauge Model No. 15964 www.phase2plus.com Unique Products - Innovative Solutions Features: 250 Gibbs Road Islandia NY 11749 * The 15964 is capable
More informationThe Major Development Trends of Polycarbonate Films. Martin Wong & Serge Vincart
Title: Company: Speakers: The Major Development Trends of Polycarbonate Films GC Limited Martin Wong & Serge Vincart 1 CONTENTS I. Trends of Plastic Film Demand II. III. IV. Advantages of PC film for MTS
More informationPrecision digital pressure gauge Model CPG1500
Calibration technology Precision digital pressure gauge Model CPG1500 WIKA data sheet CT 10.51 for further approvals see page 4 Applications Oil and gas industry Maintenance and service facilities Calibration
More informationBENCHMIKE PRO NEW. The Industry s leading off-line ID/OD/Wall measurement system
BENCHMIKE PRO NEW The Industry s leading off-line ID/OD/Wall measurement system Industry s leading sample inspection system Measure manufactured cut samples fast and with the highest accuracy in the industry
More informationShandong Oree Laser Technology Co.,Ltd.
Shandong Oree Laser Technology Co.,Ltd. Add : No.1166, Xinluo Ave Hi-tech Zone Jinan, Shandong, China Tel : +86-531-68621928 E-mail : sales@oreelaser.com Http : www.oreelaser.com Qualities are at the heart
More informationCompact design with integrated controller
1 Technical details 27 / 275 / 271 ompact design with integrated controller scanontrol 27/271 combines technology and performance in a single device, providing the dual benefits of an integrated controller
More informationOTS-600 Series Optical Sources, Meters, Testers and Kits with Data Storage Capabilities
features and benefits Large LCD screen and soft key menus Source and meter in one unit Auto wavelength switching and detection USB data ports OTS-600 Series Light Source and Power Meter Photo LAN1193 Ease
More information17" 8-Port Combo VGA LCD KVM Switch
Hardware Integrated 17 LCD monitor and keyboard/touchpad module within 1U chassis Standalone machine controls up to 8 sets of computers Up to 2 levels can be cascaded and up to 64 computers can be controlled.
More informationLumen Maintenance of LED Light Source Test Report
Lumen Maintenance of LED Light Source Test Report This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence
More information1.3 Customized Solutions (OEM)
1.3 Customized Solutions (OEM) Ophir The World Leading Source for Custom Designed Laser Measurement Solutions 1.3.1 Introduction Many laser systems manufacturers need to have a measuring capability built
More informationMM Series. The innovative MM series is the ideal systems solution for the stamping application of security features onto plastic cards (DIN 9781).
MM Series The innovative MM series is the ideal systems solution for the stamping application of security features onto plastic cards (DIN 9781). This machine, tried and tested over many years, can be
More information1. Safety instructions
AX-904 1. Safety instructions Failure to follow the instructions listed below may cause personal injury. Read and understand all instructions prior to any operation. Do not remove any label from the tool.
More informationDEFECTOMETER High detection sensitivity to surface flaws (even underneath paint) Simple, microprocessor-controlled operation
DEFECTOMETER 2.837 High detection sensitivity to surface flaws (even underneath paint) Simple, microprocessor-controlled operation Automatic lift-off and zero compensation Several alternatives for signal
More informationJATMA ORGANIZATION AND JAPANESE TAPE MARKET AND TRENDS
JATMA ORGANIZATION AND JAPANESE TAPE MARKET AND TRENDS Akira Katakura, JATMA Information Committee Chair, Teraoka Seisakusyo 1. Introduction JATMA is the association of the PSA tape industry represents
More informationSTEMMER IMAGING DAYS GOCATOR ALL-IN-ONE 3D SMART SENSORS: INDUSTRIAL APPLICATIONS. Ing. Christian Leitner Territory Manager EMEAR
STEMMER IMAGING DAYS GOCATOR ALL-IN-ONE 3D SMART SENSORS: INDUSTRIAL APPLICATIONS Ing. Christian Leitner Territory Manager EMEAR LMI TECHNOLOGIES About Our Company QUICK FACTS 37 years experience 175 employees
More informationWE TAKE RESEARCH TO HEART SCP + SCPC THE CENTRIFUGAL PUMP SYSTEM
WE TAKE RESEARCH TO HEART SCP + SCPC THE CENTRIFUGAL PUMP SYSTEM SCP THE INTEGRATED CENTRIFUGAL PUMP SYSTEM THE CONCEPT The Stöckert SCP contributes to meeting the globally increasing demand for centrifugal
More informationDP2500 DP0250. Differential Pressure Transmitter. Product Bulletin
DP2500 DP0250 Differential Pressure Transmitter Product Bulletin The DP Low Differential Pressure Transmitter series is an accurate and cost competitive solution for measuring low pressures of air and
More informationSurge Protective Device
SURGE PROTECTIVE DEVICE Surge Protective Device 20 R 320 Type Max. discharge current Imax/Iimp (ka) Number of poles (P) R: with alarm auxiliary contact Blank: without alarm auxiliary contact Max. continuous
More informationPrinted and Flexible Devices for Smart Systems On Foils
Printed and Flexible Devices for Smart Systems On Foils M. Bedjaoui CEA/LITEN 5 OCTOBRE 2012 CEA 10 AVRIL 2012 PAGE 1 Table of content CEA/LITEN Energy storage solutions on foil Electrochromic devices
More informationNew Line Confocal Imaging Method for High-Resolution 3D Surface Imaging Applications. Juha Saily Sales Manager FocalSpec, Inc.
New Line Confocal Imaging Method for High-Resolution 3D Surface Imaging Applications Juha Saily Sales Manager FocalSpec, Inc. Introduction Company Line Confocal Imaging Sensor products Scan examples System
More informationWHIRLYBIRD AUTOMATIC WEATHER STATION. Whirlybird Electronics Pvt Ltd 140, 2 nd Cross 13 th Main, BTM-I Bangalore
WHIRLYBIRD AUTOMATIC WEATHER STATION Whirlybird Electronics Pvt Ltd 140, 2 nd Cross 13 th Main, BTM-I Bangalore 560029 WHIRLYBIRD WWS-A is an Automatic weather station you can count on for reliable and
More informationUSER MANUAL ENGLISH 285-S COMPACT VALUE COUNTER
USER MANUAL ENGLISH 285-S COMPACT VALUE COUNTER INTRODUCTION ENGLISH Thank you for purchasing the Safescan 285-S compact value counter, a product of outstanding ease-of-use and quality. We recommend that
More informationAxes 150 mm/s 150 mm/s. Y axis Z axis Vector 260 mm/s 260 mm/s. P in µm P in µm
ZEISS PRO / Specifications Version: May 2016 System description ZEISS PRO Models Operating mode Sensor mounts Software Horizontal-arm measuring machine on X-axis guide for flush-floor installation Horizontal-arm
More informationECP Embedded Component Packaging Technology
ECP Embedded Component Packaging Technology A.Kriechbaum, H.Stahr, M.Biribauer, N.Haslebner, M.Morianz, M.Beesley AT&S Austria Technologie und Systemtechnik AG Abstract The packaging market has undergone
More informationElcometer 214L. Infrared Digital Thermometer. Operating Instructions
English Elcometer 214L Infrared Digital Thermometer Operating Instructions English The Elcometer 214L Infrared Digital Thermometer has been tested in accordance with EU regulations governing electro-magnetic
More informationPCMM System Specifications Leica Absolute Tracker and Leica T-Products
www.leica-geosystems.com/metrology PCMM System Specifications Leica Absolute Tracker and Leica T-Products Leica Absolute Tracker accuracy The measurement uncertainty of a coordinate U xyz is defined as
More informationAll-IN-One Surveillance Combo Kit
All-IN-One Surveillance Combo Kit 4/8 Channel Digital Video Recorder with HDMI output 600 TVL High Resolution Cameras HD recording resolution quality is better than D1 960H Full HD 1080P Exclusive Software
More information