WE TAKE RESEARCH TO HEART SCP + SCPC THE CENTRIFUGAL PUMP SYSTEM

Transcription

1 WE TAKE RESEARCH TO HEART SCP + SCPC THE CENTRIFUGAL PUMP SYSTEM

2 SCP THE INTEGRATED CENTRIFUGAL PUMP SYSTEM THE CONCEPT The Stöckert SCP contributes to meeting the globally increasing demand for centrifugal pumps used in extracorporeal perfusion. The concept of the integrated Centrifugal Pump System offers a maximum degree of flexibility to the user of Stöckert heart-lung machines of the new generation: Space-saving: Thanks to its mast mounting system, the SCP does not take up any additional pump position on the console. Easy installation: The SCP can be easily mounted and integrated into the system by means of its fast clamp connectors and its CAN-BUS System. Simple retrofitting: The SCP is compatible with all S3/SC heart-lung machines. Cost-effective: The SCP can be operated with all existing monitoring and control devices e.g., pressure control, level control and bubble detector. SCP System complete, consists of: SCP drive unit SCP pump control panel V connection cable for HLM Flow sensor (Transonic-Flow Sensor H9XL) SCP emergency drive unit, complete Dimensions, Measurements and Operating Conditions SCP pump control panel Width 180 mm (7.1 in.) Height 270 mm (10.6 in.) Depth 75 mm (3 in.) (without mast holder) Weight 3.5 kg (7.7 lbs.) (with mast holder) SCP drive unit Diameter Height Weight 96 mm (3.8 in.) (without mast holder) 135 mm (5.3 in.) 3.0 kg (6.6 lbs.) SCP emergency drive unit Diameter 100 mm (3.9 in.) (without mast holder) Height 250 mm (9.8 in.) Weight 4.5 kg (9.9 lbs.) Height hand crank 115 mm (4.5 in.) Diameter hand crank 26 mm (1 in.) Operation conditions Operating temperature +10 C (50 F) to +40 C (104 F) Storing temperature 0 C (32 F) to +40 C (104 F) Relative humidity 30% to 75% (Operation and storage)

3 SCP PUMP CONTROL PANEL All parameters relevant for perfusion are set and displayed on the SCP Pump Control Panel. All control and monitoring functions e.g., level/bubble and pressure control used for extracorporeal perfusion are displayed on the control panel. The integrated control elements are an additional factor in ensuring the safe usage of centrifugal pumps. The pump control panel is fully integrated into the operation and control of the S3/SC System. As is the case with all components of the S3/SC Systems, communication goes via the CAN-BUS. In case of a total power failure, the UPS of the S3/SC System takes over the power supply function. The flow controlled mode (Auto) Using the flow controlled mode (Auto), the set flow can be adjusted directly by turning the speed control knob. Due to the automatic adjustment of the RPM, the set flow is kept at a constant level even if the systemic resistance and/or pressure changes during perfusion. SCP pump control panel Electrical remote-controlled tubing clamp (optional) The electrical remote-controlled tubing clamp offers a high degree of protection against air delivery. In case of alarm (e.g. level/bubble alarm or retrograde flow), the arterial line can be occluded in a fraction of a second by the electrically operated tubing clamp. The clamp may also be opened and closed manually via the respective keys on the pump control panel. Low RPM Lockout The integrated lockout prevents the pump speed from being reduced unintentionally below the preset limit. Speed below the Low RPM Limit can only be adjusted when disabling the lockout manually by pressing the low-speed lockout release key. Integration into the system Both, the mast holder of the pump control panel and the 3-joint mast holder of the SCP drive unit are supplied with fast clamp connectors to facilitate mounting to the S3/SC System. You are free to mount the SCP System on the left or right side of the S3/SC System`s vertical masts. Technical Data Displays Range of RPM display Resolution of the displayed actual value Resolution of the adjusted set value Measurement range: flow Resolution of the 7-segment-flow-display Accuracy of the measured flow 0 to 3500 RPM 1 RPM 1 RPM -10 to LPM 0.1 LPM < 0 LPM 0.01 LPM > 0 LPM ±10% of the actual value and/or ±0.1 LPM Alarm limits of the displayed flow Flow too high 0.5 to LPM Flow too low 0.0 to 5.0 LPM Retrograde flow 0.0 to 1.0 LPM Pressure display Range of display Resolution Accuracy of the measured values Electrical Data -99 to +999 mmhg 1 mmhg ±5 mmhg Drip proof IPX 2 Input voltage 24 V supply via HLM/SCPC System Input current 6 A Power consumption max. 120 W

4 SCP DRIVE UNIT The SCP drive unit is delivered with a 3-joint mast holder with fast clamp connector and can be mounted with a great degree of flexibility. The Cobe Revolution centrifugal blood pump (CBP) is driven by a magnetic coupling. The retaining key at the pump head receptacle locks the Cobe Revolution CBP into place and also acts as a protection against torsion during operation. The SCP drive unit is protected against overheating by a passive ventilation system. Electrical Data SCP drive unit Drip proof IPX 2 Input voltage min.: 20 V DC nom.: 24 V DC max.: 32 V DC Technical Data Range of speed Speed accuracy 0 to 3500 RPM ±10 RPM SCP FLOW SENSOR The total flow can be measured independently and precisely by the Transonic Flow Sensor thus ensuring an increase in safety during extracorporeal perfusion. Flow sensors are clipped around the outside of standard PVC-tubing to provide non-invasive flow measurements. The integrity of non-thrombogenic surfaces is maintained. The Transonic Flow Sensor is intended for use with blood and saline solutions. Flow sensor (Transonic-Flow-Sensor H9XL) Technical Data Tubing size ID. 3/8 in. Wall thickness 3/32 in. OD. 9/16 in. Bidirectional flow Resolution 5 ml/min Maximum flow 10 L/min Accuracy of the measured values Zero stability 12 ml/min Sensitivity ±5 % 15 ml/min Ultrasonic frequency 1.8 MHz

5 SCP EMERGENCY DRIVE UNIT The emergency drive unit enables you to complete the procedure by means of hand cranking. It is operated by turning the hand crank clockwise. The hand crank turns freely in the opposite direction (anti-clockwise). The corresponding pump speed is displayed on the LEDs of the emergency drive unit. The retaining key at the pump head receptacle locks the Cobe Revolution CBP into place and acts as a protection against torsion during opertion. The holder with clamping screw facilitates the mounting of the emergency drive unit to the mast system of the S3/SC and SCPC System. Emergency drive unit, complete Technical Data Speed display Resolution Displayed range of speed Accuracy 7 LEDs 500 RPM per LED (starting at 1000 RPM) 1000 to 4000 RPM ±250 RPM

6 The Cobe Revolution centrifugal blood pump utilizes a rotating, vaned impeller design to move blood by centrifugal force. The pump is intended for use only with the Stöckert SCP System in cardiopulmonary bypass procedures for periods of up to six hours. Excellent air handling capability Low priming volume Low heat generation Lower index of hemolysis Minimal surface area Large washout holes Low blood transit time No stagnant areas Specifications Priming volume Maximum flow rate Maximum outlet pressure Inlet/outlet connector 57 ml 8 lpm 800 mmhg 3/8 in. (9.5 mm)

7 SCP + SCPC THE CENTRIFUGAL PUMP SYSTEM THE CONCEPT The Stöckert Centrifugal Pump Console (SCPC) has been designed according to the latest state-of-theart technology to fully meet our customers` highly specialized demands. The Stöckert Centrifugal Pump Console (SCPC) combined with the Stöckert Centrifugal Pump System (SCP) comprises an independent centrifugal pump system which is setting new standards in flexibility, ease of use, safety and ergonomics: The SCPC can be operated as a stand-alone system. The SCPC may, of course, be easily integrated into all heart-lung-machines currently present on the market. In case of a power failure, the system`s integrated uninterruptible power supply (UPS) takes over the entire power supply for a duration of 90 minutes. The battery capacity is displayed both, in percent and as a bar graph display. All settings, the operation and the configuration of the monitoring functions can be effected on the SCPC`s touchscreen. The SCPC System enables you to configure the system according to your individual requirements. All relevant data can be registered and recorded via the Stöckert Data Management System (DMS). The SCPC System features an integrated display of the date and time as well as 2 independent timers with readouts in hours/ minutes/seconds. SCPC System complete, consists of: Power cable X Potential equalization cable (5 m) Sensor module pressure control Sensor module temperature monitor or: SCPC System complete, consists of: Power cable X Potential equalization cable (5 m) Sensor module pressure control Sensor module level/bubble Level sensor Bubble sensor 3/8" joint mast holder with fast clamp connector System Accessories SCP System complete, consists of: SCP drive unit with fast clamp connector SCP pump control panel with fast clamp connector V connection cable for SCPC System Flow sensor (Transonic-Flow-Sensor H9XL) SCP emergency drive unit, complete Dimensions, Measurement and Operating Conditions SCPC System Width Height Depth Weight 180 mm (7.1 in.) 365 mm (14.4 in.) (with grip) 423 mm (16.7 in.) 20 kg (44 lbs.) Operating conditions Operating temperature +10 C (50 F) to +40 C (104 F) Storing temperature 0 C (32 F) to +40 C (104 F) Relative humidity 30% to 75% (Operation and storage)

8 SCPC SYSTEM CONFIGURATION You are offered a high degree of flexibility in configuring the SCPC System. Dependent on the configuration of the sensor modules, you may select the following monitoring functions: Pressure Control 2 pressure channels with alarm limits for channel 1 and 2 or 1 pressure channel with alarm limits und flow display System menu Temperature Monitor and Level/Bubble Control 4 temperature channels with alarm limits for channel 1 or 1 temperature channel with alarm limits and bubble control or 1 temperature channel with alarm limits and level control or 1 temperature channel with alarm limits and level/bubble control Electrical Data SCPC System Drip proof IPX 2 Input voltage 120 V~, 50/60 Hz (according to UL approval) (100 V~, 110 V~, 115 V~, 127 V~, 220 V~, 230 V~, 240 V~; 50/60 Hz) Input power 1.0 A (230/240 V) Power consumption max. 220 W Mains fuse Automatic circuit breaker (implemented in mains 2.0 A nominal release power switch) current 120 V 1.0 A nominal release current 230 V Main menu Electrical Data Sensor Module Pressure Control Operating voltages Power consumption Output voltage to pressure transducer Input resistance Sensor Module Temperature Monitor Operating voltages Power consumption Temperature measurement range Resolution Accuracy +5 V, ±12 V 3 W < 10 V 100 k Ω +5 V, ±12 V 3 W 0 C (32 F) to +50 C (122 F) 0.1 C ±0.2 C Output Voltage Nominal output voltage 24 V (2x12 V) Min. output voltage 20 V (2x10 V) Max. output voltage 32 V Accessories (optional) Bentley-Trantec pressure transducer Output Power Nominal output power Capacity of new accumulators Fuse protection of accumulators Operating time of UPS At 100 W output power Charging time 100 W 7 Ah 10 A slow-blow 90 minutes 20 hours max. Temperature probes for direct measurements in oxygenators: for COBE oxygenators for DIDECO and BENTLEY oxygenators for SORIN oxygenators for MEDTRONIC oxygenators

9 THE ELECTRICAL REMOTE-CONTROLLED TUBING CLAMP THE CONCEPT ULTIMATE EASE OF USE AND SAFETY IN CENTRIFUGAL PERFUSION TECHNOLOGY The electrical remote-controlled tubing clamp, designed for operation with the SCP System, demonstrates clear evidence for feasible improvements in ease of use and safety of centrifugal perfusion technology. It has been especially developed according to latest state-of-the-art technology taking a high degree of flexibility and ergonomic standards for our users requirements into consideration. The result is a unique safety concept offering additional protection against air delivery during centrifugal blood pumping. In case of alarms (e.g. level bubble alarm or retrograde flow), the electrical remotecontrolled tubing clamp occludes the arterial line within fractions of a second thus reducing the danger of air delivery to a minimum. Furthermore, the clamp can also be opened and closed manually at any time by pressing the respective key at the SCP pump control panel. Electrical remote-controlled tubing clamp complete, consists of: Tubing clamp with joint mast holder (500 mm), fast clamp connector and 24 V connection cable or: Tubing clamp with joint mast holder (620 mm), fast clamp connector and 24 V connection cable

10 THE ELECTRICAL REMOTE-CONTROLLED TUBING CLAMP ADVANTAGES OF THE PRODUCT Unique safety concept featuring innovative protection measures against air delivery during centrifugal blood pumping Automatic clamping of the arterial line in case of level/bubble alarm or retrograde flow Allows clamping of the arterial line within fractions of a second Quick release function for the inserted tubing by simply opening the lock at the clamping head flap 2 keys located at the SCP pump control panel make the operation a model of ease of use and user-friendliness Option to open/close the clamp manually via the respective keys at the SCP pump control panel Maximum ease of use for starting and stopping extracorporeal perfusion State-of-the-art -communication via the CAN-BUS System 24 V-powered by the S3/SC/SCPC Systems incorporating UPS functions in case of a power failure Optimal positioning of the clamp by means of a 3-joint mast holder with fast clamp connector Suitable for standard 3/8" x 3/32" PVC-tubings Technical Data Electrical Data Drip proof IPX 2 Input voltage 24 V supply via HLM / SCPC System Input current 1.5 A Power consumption max. 36 W Dimensions and Weight Length Width Height Weight with holder 236 mm (9.3 in.) 66 mm (2.6 in.) 71 mm (2.8 in.) 3 kg (6.6 lbs.) Operating conditions Operating temperature +10 C (50 F) to +40 C (104 F) Storing temperature 0 C (32 F) to +40 C (104 F) Relative humidity 30% to 75% (operation and storage)

11 SCPC ACCESSORIES SCPC Trolley The trolley s unique design is a milestone in meeting the users expectations of a flexible and mobile cardiopulmonary bypass system. The SCPC is securely seated in the trolley s solid, stainless steel console. Two easily steerable casters guarantee its excellent manoeuvrability. In addition, the height of the trolley s push grip can be adjusted as desired to facilitate transportation. For mounting the accessories, the SCPC trolley features a vertical mast and a telescope mast with rotatable infusion rack. The SCP pump control panel and the drive unit, the electrical remote-controlled tubing clamp as well as other accessories or disposables may be mounted to the mast system. SCPC Trolley complete, consists of: movable console telescope mast with infusion rack vertical mast push grip mast connectors for push grip SCPC Adapter Plates In order to guarantee the safe operation of the SCPC System with various heart-lung machines, we offer the corresponding adapter plates. Adapter plate S3 System Adapter plate Caps Adapter plate Cobe Century Adapter plate Sarns Dimensions and Weight SCPC Trolley Width 425 mm (16.7 in.) (with push grip) Height 165 mm (6.5 in.) Depth 609 mm (23.8 in.) Weight 21.5 kg (47.4 lbs.)

12 KA E Stöckert Instrumente GmbH Lindberghstraße 25 D München Telefon: Telefax: info@stoeckert.de