Stump the WBE Wizard. Mallett Technology Year End Meeting December 19,
|
|
- Frank Benson
- 5 years ago
- Views:
Transcription
1 Stump the WBE Wizard 1
2 How do you become an AWE Wizard? Rich Alferi, Respironics: Since I have been using WB for a while, I think I have had most of my questions answered through tech support and training classes (Yes we actually go to training classes!). 2
3 WBE Training - DesignModeler - Create and modify geometry in preparation for analysis - Navigate within the Graphical User Interface - Generate 2D sketches and convert them into 2D or 3D models - Modify 2D and 3D geometry - Import existing CAD geometry - Create line bodies and their cross sections in preparation for beam analysis - Create surface bodies in preparation for shell analysis - Model assemblies/multi-body Parts - Utilize parameters 3
4 WBE Training - ANSYS Workbench - Simulation Introduction - Simulation Basics - General Preprocessing - Static Structural Analysis - Free Vibration Analysis - Thermal Analysis - Linear Buckling Analysis - Results Postprocessing - CAD & DesignXplorer Parameter Manager - Harmonic Analysis - Asynchronous Solution - Fatigue Module - Shape Finder 4
5 WBE Training - ANSYS Workbench - Simulation Introduction - Nonlinear Structural - Advanced Contact - Metal Plasticity - Hyperelasticity - Nonlinear Diagnostics - Accessing ANSYS Options 5
6 Can submodeling be done in Workbench? When will WBE have transient thermal stress analysis with multifield elements in coupled field solution (something like machining or grinding; where heat can be generated due to material deformation)? Structural transient analysis 6
7 How to view the force convergence graph from the solution information tab? 7
8 Saving unconverged solutions, i.e. Load Case
9 How to perform thermal stress analysis after a transient thermal solution? 9
10 The details view and graphics legend include the display time Timeline and tabular data are available for each result time solved for 10 Check boxes control timeline display
11 Can we take control of the contour legend format and select a decimal format instead of scientific notation, i.e., make the stress contour legend NOT be reported as x10^4? (Wow, my stress is only 5.2 psi. Oh wait, it's 520,000. No, it's 52,000.) 11
12 Is there a way to produce a higher quality.jpg? 12
13 Cyclic Symmetry 13
14 How about the use of rigid targets with pilot nodes in workbench? 14
15 How to perform some of the classical time-history post processing? 15
16 The average stress across a section of a solid model? In AWE 10 you can use export probe data to excel to find the average stress for a body, surface or edge. 16
17 Thermal Radiation 17
18 Response Spectrum Analyses 18
19 Can an analysis in Workbench be solved in batch mode? User s machine, where model is set-up and results are reviewed. Client Send input and solve Retrieve results Server Server machine where numerical calculations are performed. 19
20 Easy to input temperature dependent material properties Linear Elastic Young's Modulus - Temperature Dependent Poisson's Ratio - Temperature Dependent Orthotropic ElasticityDensity - Temperature Dependent Thermal Expansion - Temperature Dependent Bilinear Isotropic Hardening Multilinear Isotropic Hardening Hyperelastic Mooney-Rivlin (2, 3, 5, 9 Parameter) Neo-Hookean Polynomial (1 st Order 3 rd Order) Yeoh(1 st Order 3 rd Order) Ogden (1 st Order 3 rd Order) 20
21 DesignModeler How To/Wish List I'm trying to add fillets to sharp corners inside a hollow 3D model. How can I do a capped, hidden plot to see the geometry? 21
ANSYS Workbench Guide
ANSYS Workbench Guide Introduction This document serves as a step-by-step guide for conducting a Finite Element Analysis (FEA) using ANSYS Workbench. It will cover the use of the simulation package through
More informationFinite Element Analysis using ANSYS Mechanical APDL & ANSYS Workbench
Finite Element Analysis using ANSYS Mechanical APDL & ANSYS Workbench Course Curriculum (Duration: 120 Hrs.) Section I: ANSYS Mechanical APDL Chapter 1: Before you start using ANSYS a. Introduction to
More informationExercise 1. 3-Point Bending Using the Static Structural Module of. Ansys Workbench 14.0
Exercise 1 3-Point Bending Using the Static Structural Module of Contents Ansys Workbench 14.0 Learn how to...1 Given...2 Questions...2 Taking advantage of symmetries...2 A. Getting started...3 A.1 Choose
More informationSIMULATION CAPABILITIES IN CREO
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
More informationSuper Elastic Alloy Eyeglass Frame Design Using the ANSYS Workbench Environment
Super Elastic Alloy Eyeglass Frame Design Using the ANSYS Workbench Environment Peter R. Barrett, P.E. Computer Aided Engineering Associates Inc. Patrick Cunningham Computer Aided Engineering Associates
More informationASME Fatigue DOCUMENTATION. ANSYS Mechanical Application. Extension version Compatible ANSYS version
ASME Fatigue ANSYS Mechanical Application DOCUMENTATION Extension version 180.1 Release date 06-Apr-17 Compatible ANSYS version 18.0 www.edrmedeso.com Table of Contents 1 INTRODUCTION... 3 2 PRODUCT RESTRICTIONS...
More informationSIMULATION CAPABILITIES IN CREO. Enhance Your Product Design with Simulation & Analysis
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
More informationEngineering Analysis
Engineering Analysis with SOLIDWORKS Simulation 2018 Paul M. Kurowski SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationPTC Creo Simulate. Features and Specifications. Data Sheet
PTC Creo Simulate PTC Creo Simulate gives designers and engineers the power to evaluate structural and thermal product performance on your digital model before resorting to costly, time-consuming physical
More informationAufgabe 1: Dreipunktbiegung mit ANSYS Workbench
Aufgabe 1: Dreipunktbiegung mit ANSYS Workbench Contents Beam under 3-Pt Bending [Balken unter 3-Pkt-Biegung]... 2 Taking advantage of symmetries... 3 Starting and Configuring ANSYS Workbench... 4 A. Pre-Processing:
More informationTUTORIAL 7: Stress Concentrations and Elastic-Plastic (Yielding) Material Behavior Initial Project Space Setup Static Structural ANSYS ZX Plane
TUTORIAL 7: Stress Concentrations and Elastic-Plastic (Yielding) Material Behavior In this tutorial you will learn how to recognize and deal with a common modeling issues involving stress concentrations
More informationSolidWorks. An Overview of SolidWorks and Its Associated Analysis Programs
An Overview of SolidWorks and Its Associated Analysis Programs prepared by Prof. D. Xue University of Calgary SolidWorks - a solid modeling CAD tool. COSMOSWorks - a design analysis system fully integrated
More informationMSC.Patran Marc Preference
MSC.Patran Marc Preference PRODUCT LINE MSC.Patran OVERVIEW MSC.Patran is a world-class finite element modeling pre- and post-processor, which is tightly integrated with the MSC.Marc FEA program, allowing
More informationNouveautés ANSYS pour le calcul structurel et l impression 3D. CADFEM 2017 ANSYS Additive Manufacturing
Titelmasterformat Journée Technologique durch AddiPole Klicken bearbeiten Nouveautés ANSYS pour le calcul structurel et l impression 3D Titelmasterformat Structural design with durch ANSYS Klicken bearbeiten
More informationChapter 5 Modeling and Simulation of Mechanism
Chapter 5 Modeling and Simulation of Mechanism In the present study, KED analysis of four bar planar mechanism using MATLAB program and ANSYS software has been carried out. The analysis has also been carried
More informationSOLIDWORKS SIMULATION
SUPPORTING EXCELLENCE GET ENGINEERING INSIGHTS WITH VIRTUAL SOPHISTICATED IS NO LONGER JUST FOR SPECIALISTS Concurrent Engineering for more informed design Simulation gives product engineers access to
More informationExercise 1: 3-Pt Bending using ANSYS Workbench
Exercise 1: 3-Pt Bending using ANSYS Workbench Contents Starting and Configuring ANSYS Workbench... 2 1. Starting Windows on the MAC... 2 2. Login into Windows... 2 3. Start ANSYS Workbench... 2 4. Configuring
More informationNonLinear Materials AH-ALBERTA Web:
NonLinear Materials Introduction This tutorial was completed using ANSYS 7.0 The purpose of the tutorial is to describe how to include material nonlinearities in an ANSYS model. For instance, the case
More informationNEW WAVE OF CAD SYSTEMS AND ITS APPLICATION IN DESIGN
Vol 4 No 3 NEW WAVE OF CAD SYSTEMS AND ITS APPLICATION IN DESIGN Ass Lecturer Mahmoud A Hassan Al-Qadisiyah University College of Engineering hasaaneng@yahoocom ABSTRACT This paper provides some lighting
More informationNX Advanced FEM. Benefits
Advanced FEM fact sheet Siemens PLM Software www.siemens.com/plm Summary Advanced FEM software is a comprehensive multi-cad finite element modeling and results visualization product that is designed to
More informationFully-Coupled Thermo-Mechanical Analysis
Fully-Coupled Thermo-Mechanical Analysis Type of solver: ABAQUS CAE/Standard Adapted from: ABAQUS Example Problems Manual Extrusion of a Cylindrical Aluminium Bar with Frictional Heat Generation Problem
More informationSOLIDWORKS SIMULATION
SOLIDWORKS SIMULATION Innovation is about taking chances, not taking risks Scootchi by Curventa Designworks LTD What if? is the question that fuels innovation. SolidWorks Simulation software takes the
More informationINTRODUCTION TO THE SYSTEM
INTRODUCTION TO THE SYSTEM 1 INTRODUCTION TO THE SYSTEM 1. Introduction The ANSYS computer program is a large-scale multi-purpose finite element program, which may be used for solving several classes of
More informationNonLinear Analysis of a Cantilever Beam
NonLinear Analysis of a Cantilever Beam Introduction This tutorial was created using ANSYS 7.0 The purpose of this tutorial is to outline the steps required to do a simple nonlinear analysis of the beam
More informationCAD - How Computer Can Aid Design?
CAD - How Computer Can Aid Design? Automating Drawing Generation Creating an Accurate 3D Model to Better Represent the Design and Allowing Easy Design Improvements Evaluating How Good is the Design and
More informationAbout the Author. Acknowledgements
About the Author Dr. Paul Kurowski obtained his M.Sc. and Ph.D. in Applied Mechanics from Warsaw Technical University. He completed postdoctoral work at Kyoto University. Dr. Kurowski is an Assistant Professor
More informationAppendix B Submodeling Technique
Appendix B Submodeling Technique 16.0 Release Introduction to ANSYS Mechanical 1 2015 ANSYS, Inc. February 27, 2015 Chapter Overview In this chapter controlling meshing operations is described. Topics:
More informationAgenda. 9:00 Welcome. 1:00 - Computing Utilities. 9:15 - Mechanical Demonstration. 1:30 - CFD Update. 3:00 Break 3:15 ANSYS Customization Toolkit
Agenda 9:00 Welcome 1:00 - Computing Utilities Introductions HPC What is new at CAEA GPU 9:15 - Mechanical Demonstration CAD connection utilities (within the CAD API) Mechanical setup Rigid Bodies, Joints,
More informationModule 1.3W Distributed Loading of a 1D Cantilever Beam
Module 1.3W Distributed Loading of a 1D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Workbench Analysis System 4 Engineering Data 5 Geometry 6 Model 11 Setup 13 Solution
More informationANSYS/LS-Dyna. Workbench Using. Steven Hale Senior Engineering Manager CAE Associates, Inc. June 13, CAE Associates
ANSYS/LS-Dyna Customization in Workbench Using ACT Steven Hale Senior Engineering Manager CAE Associates, Inc. June 13, 2013 2013 CAE Associates CAE Associates CAE Associates is an engineering services
More informationABAQUS for CATIA V5 Tutorials
ABAQUS for CATIA V5 Tutorials AFC V2.5 Nader G. Zamani University of Windsor Shuvra Das University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com ABAQUS for CATIA V5,
More informationLab#5 Combined analysis types in ANSYS By C. Daley
Engineering 5003 - Ship Structures I Lab#5 Combined analysis types in ANSYS By C. Daley Overview In this lab we will model a simple pinned column using shell elements. Once again, we will use SpaceClaim
More informationModule 1.7W: Point Loading of a 3D Cantilever Beam
Module 1.7W: Point Loading of a 3D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Workbench Analysis System 4 Engineering Data 5 Geometry 6 Model 11 Setup 13 Solution 14 Results
More informationFinite Element Course ANSYS Mechanical Tutorial Tutorial 3 Cantilever Beam
Problem Specification Finite Element Course ANSYS Mechanical Tutorial Tutorial 3 Cantilever Beam Consider the beam in the figure below. It is clamped on the left side and has a point force of 8kN acting
More informationCoupled Structural/Thermal Analysis
Coupled Structural/Thermal Analysis Introduction This tutorial was completed using ANSYS 7.0 The purpose of this tutorial is to outline a simple coupled thermal/structural analysis. A steel link, with
More informationQuick Start Guide to midas NFX
Quick Start Guide to midas NFX This guide is made for non-experienced FEA users. It provides basic knowledge needed to run midas NFX successfully and begin your analysis. Experienced FEA analysts can also
More informationFEA Applications I MET 415 Review Course Structure: 15 week course Weekly Schedule 50 minute lecture 2.5 hour laboratory 50 minute lecture
FEA Applications I MET 415 Review Course Structure: 15 week course Weekly Schedule 50 minute lecture 2.5 hour laboratory 50 minute lecture Goal: Obtain feedback from Industry Users on course presentation
More informationFinite Element Course ANSYS Mechanical Tutorial Tutorial 4 Plate With a Hole
Problem Specification Finite Element Course ANSYS Mechanical Tutorial Tutorial 4 Plate With a Hole Consider the classic example of a circular hole in a rectangular plate of constant thickness. The plate
More informationVisit the following websites to learn more about this book:
Visit the following websites to learn more about this book: 6 Introduction to Finite Element Simulation Historically, finite element modeling tools were only capable of solving the simplest engineering
More informationCHAPTER 6 EXPERIMENTAL AND FINITE ELEMENT SIMULATION STUDIES OF SUPERPLASTIC BOX FORMING
113 CHAPTER 6 EXPERIMENTAL AND FINITE ELEMENT SIMULATION STUDIES OF SUPERPLASTIC BOX FORMING 6.1 INTRODUCTION Superplastic properties are exhibited only under a narrow range of strain rates. Hence, it
More informationES 128: Computer Assignment #4. Due in class on Monday, 12 April 2010
ES 128: Computer Assignment #4 Due in class on Monday, 12 April 2010 Task 1. Study an elastic-plastic indentation problem. This problem combines plasticity with contact mechanics and has many rich aspects.
More informationDIANA FINITE ELEMENT ANALYSIS
DIANA FINITE ELEMENT ANALYSIS DIANA FEA a TNO Company DIANA F I N I T E E L E M E N T A N A LY S I S DIANA (DIsplacement ANAlyzer) is a multi-purpose finite element program, with a special strength in
More informationNX Advanced FEM. fact sheet
Advanced FEM fact sheet www.ugs.com Summary Advanced FEM is a comprehensive multi-cad finite element modeling and results visualization product that is designed to meet the needs of experienced CAE analysts.
More informationCreo Simulate 3.0 Tutorial
Creo Simulate 3.0 Tutorial Structure and Thermal Roger Toogood, Ph.D., P. Eng. SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationMutltiphysics for Ironcad Demonstration Models (Rev. 1.1)
Centrifuge Model The centrifuge model demonstrates how to perform a rotational spinning centrifugal load analysis. It also demonstrates how to group different parts with/without the intended initial bonding
More informationCoupled Analysis of FSI
Coupled Analysis of FSI Qin Yin Fan Oct. 11, 2008 Important Key Words Fluid Structure Interface = FSI Computational Fluid Dynamics = CFD Pressure Displacement Analysis = PDA Thermal Stress Analysis = TSA
More informationANSYS 5.6 Tutorials Lecture # 2 - Static Structural Analysis
R50 ANSYS 5.6 Tutorials Lecture # 2 - Static Structural Analysis Example 1 Static Analysis of a Bracket 1. Problem Description: The objective of the problem is to demonstrate the basic ANSYS procedures
More informationCHAPTER 4. Numerical Models. descriptions of the boundary conditions, element types, validation, and the force
CHAPTER 4 Numerical Models This chapter presents the development of numerical models for sandwich beams/plates subjected to four-point bending and the hydromat test system. Detailed descriptions of the
More information3D Finite Element Software for Cracks. Version 3.2. Benchmarks and Validation
3D Finite Element Software for Cracks Version 3.2 Benchmarks and Validation October 217 1965 57 th Court North, Suite 1 Boulder, CO 831 Main: (33) 415-1475 www.questintegrity.com http://www.questintegrity.com/software-products/feacrack
More informationSOLIDWORKS Simulation: Material Model Types Defined
SOLIDWORKS Simulation: Material Model Types Defined In SOLIDWORKS Simulation Premium there are 11 material model types which will influence the results of a Linear or Nonlinear Analysis. These models types
More informationNEi FEA. IRONCAD Advanced FEA. IRONCAD Advanced FEA. NEi FEA
2011 Overview has been designed as a universal, adaptive and user-friendly graphical user interface for geometrical modeling, data input and visualization of results for all types of numerical simulation
More informationAnsys Mechanical APDL
Ansys Mechanical APDL Day 1: FEA and ANSYS 9.00 12.00 About ANSYS, What is FEA?, Instructor Example Getting Started 12.00 1.00 Interactive Vs. Batch Mode, Starting ANSYS, Product Launcher, ANSYS Workbench,
More informationOverview of ABAQUS II. Working with Geometry in ABAQUS III. Working with models Created Outside ABAQUS IV. Material and Section Properties
ABAQUS TRAINING I. Overview of ABAQUS II. Working with Geometry in ABAQUS III. Working with models Created Outside ABAQUS IV. Material and Section Properties V. Assemblies in ABAQUS VI. Steps, Output,
More informationMAE Advanced Computer Aided Design. 02. Ansys Workbench Doc 01. Introduction to Ansys Workbench
MAE 656 - Advanced Computer Aided Design 02. Ansys Workbench Doc 01 Introduction to Ansys Workbench Main Screen Components: Top menu Toolbox Messages Progress Project Properties Top Menu File Top Menu
More informationSolid and shell elements
Solid and shell elements Theodore Sussman, Ph.D. ADINA R&D, Inc, 2016 1 Overview 2D and 3D solid elements Types of elements Effects of element distortions Incompatible modes elements u/p elements for incompressible
More informationEN1740 Computer Aided Visualization and Design Spring /26/2012 Brian C. P. Burke
EN1740 Computer Aided Visualization and Design Spring 2012 4/26/2012 Brian C. P. Burke Last time: More motion analysis with Pro/E Tonight: Introduction to external analysis products ABAQUS External Analysis
More informationExercise 1. 3-Point Bending Using the GUI and the Bottom-up-Method
Exercise 1 3-Point Bending Using the GUI and the Bottom-up-Method Contents Learn how to... 1 Given... 2 Questions... 2 Taking advantage of symmetries... 2 A. Preprocessor (Setting up the Model)... 3 A.1
More informationAbaqus/CAE Axisymmetric Tutorial (Version 2016)
Abaqus/CAE Axisymmetric Tutorial (Version 2016) Problem Description A round bar with tapered diameter has a total load of 1000 N applied to its top face. The bottom of the bar is completely fixed. Determine
More informationAnalysis Steps 1. Start Abaqus and choose to create a new model database
Source: Online tutorials for ABAQUS Problem Description The two dimensional bridge structure, which consists of steel T sections (b=0.25, h=0.25, I=0.125, t f =t w =0.05), is simply supported at its lower
More informationTechnical Report Example (1) Chartered (CEng) Membership
Technical Report Example (1) Chartered (CEng) Membership A TECHNICAL REPORT IN SUPPORT OF APPLICATION FOR CHARTERED MEMBERSHIP OF IGEM DESIGN OF 600 (103 BAR) 820MM SELF SEALING REPAIR CLAMP AND VERIFICATION
More informationANSYS Element. elearning. Peter Barrett October CAE Associates Inc. and ANSYS Inc. All rights reserved.
ANSYS Element Selection elearning Peter Barrett October 2012 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved. ANSYS Element Selection What is the best element type(s) for my analysis? Best
More informationACP (ANSYS Composite Prep/Post) Jim Kosloski
ACP (ANSYS Composite Prep/Post) Jim Kosloski ACP Background ANSYS Composite PrepPost is an add-on module dedicated to the modeling of layered composite structures. ACP is now included with the Mechanical
More informationANSYS Webinar Sealing Applications Siddharth Shah Presented by Pierre THIEFFRY Product Managers Ansys, Inc.
ANSYS Webinar Sealing Applications Siddharth Shah Presented by Pierre THIEFFRY Product Managers Ansys, Inc. 2008 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Agenda Seals and ANSYS tools
More informationApplication Customization Toolkit. Jim Kosloski
Application Customization Toolkit Jim Kosloski What is ACT? ANSYS ACT is the unified and consistent tool for the customization and expansion of ANSYS products. Using ACT, you can create vertical apps or
More informationChapter 2. Structural Tutorial
Chapter 2. Structural Tutorial Tutorials> Chapter 2. Structural Tutorial Static Analysis of a Corner Bracket Problem Specification Problem Description Build Geometry Define Materials Generate Mesh Apply
More informationfile://c:\documents and Settings\sala\Configuración local\temp\~hha54f.htm
Página 1 de 26 Tutorials Chapter 2. Structural Tutorial 2.1. Static Analysis of a Corner Bracket 2.1.1. Problem Specification Applicable ANSYS Products: Level of Difficulty: Interactive Time Required:
More informationValidation Report: Additional Data Mapping to Structural Analysis Packages
Autodesk Moldflow Structural Alliance 2012 Validation Report: Additional Data Mapping to Structural Analysis Packages Mapping process-induced stress data from Autodesk Moldflow Insight Dual Domain and
More informationMRI Induced Heating of a Pacemaker. Peter Krenz, Application Engineer
MRI Induced Heating of a Pacemaker Peter Krenz, Application Engineer 1 Problem Statement Electric fields generated during MRI exposure are dissipated in tissue of the human body resulting in a temperature
More informationAdvanced Material Models and Geomechanics
Advanced Material Models and Geomechanics Giovanni Federico, Mark Robinson ANSYS UK Ltd 1 2016 ANSYS, Inc. April 28, 2017 2 2016 ANSYS, Inc. April 28, 2017 Advanced Material Models NEW Unified Viscoplasticity
More informationModule 1.5: Moment Loading of a 2D Cantilever Beam
Module 1.5: Moment Loading of a D Cantilever Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing 9 Loads
More informationModelling Flat Spring Performance Using FEA
Modelling Flat Spring Performance Using FEA Blessing O Fatola, Patrick Keogh and Ben Hicks Department of Mechanical Engineering, University of Corresponding author bf223@bath.ac.uk Abstract. This paper
More informationMay 11, ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary Inventory #
Chapter 1 ANSYS DesignModeler Introduction to Workbench 1-1 ANSYS Workbench Overview ANSYS Workbench comprises the following modules: Simulation for performing structural and thermal analyses using the
More informationCATIA V5 FEA Tutorials Release 14
CATIA V5 FEA Tutorials Release 14 Nader G. Zamani University of Windsor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com CATIA V5 FEA Tutorials 2-1 Chapter 2 Analysis
More informationUsing MSC.Nastran for Explicit FEM Simulations
3. LS-DYNA Anwenderforum, Bamberg 2004 CAE / IT III Using MSC.Nastran for Explicit FEM Simulations Patrick Doelfs, Dr. Ingo Neubauer MSC.Software GmbH, D-81829 München, Patrick.Doelfs@mscsoftware.com Abstract:
More informationAgenda. 9:00 Welcome. 1:00 - Computing Utilities. 9:15 - Mechanical Demonstration. 1:30 - CFD Update. 3:00 Break 3:15 ANSYS Customization Toolkit
Agenda 9:00 Welcome 1:00 - Computing Utilities Introductions What is new at CAEA 9:15 - Mechanical Demonstration CAD connection utilities (within the CAD API) Mechanical setup Rigid Bodies, Joints, contact,
More informationR15.0 Structural Update
R15.0 Structural Update 1 Tim Pawlak R&D Fellow ANSYS Structural Update Topics Geometry and Mesh Material Behavior Numerical Methods Composites Dynamics Submodeling Multiphysics Solvers User Interface
More informationSOLIDWORKS Simulation Avoiding Singularities
SOLIDWORKS Simulation Avoiding Singularities What is a Singularity? A singularity is a function s divergence into infinity. SOLIDWORKS Simulation occasionally produces stress (or heat flux) singularities.
More informationRelease April 2013
Release 4.4.1 April 2013 For a fast & accurate prediction of the nonlinear behavior of multi-phase materials using Mean-Field homogenization technology. For an accurate prediction of the local/global nonlinear
More informationStatic And Modal Analysis Of Rotating Wheel Rim Using Ansys
International Journal of Engineering Science Invention ISSN (Online): 2319 6734, ISSN (Print): 2319 6726 Volume 3 Issue 9 ǁ September 2014 ǁ PP.18-23 Static And Modal Analysis Of Rotating Wheel Rim Using
More information3DEXPERIENCE 2017x FINITE ELEMENT ESSENTIALS IN SDC USING SIMULIA/CATIA APPLICATIONS. Nader G. Zamani
Nader G. Zamani FINITE ELEMENT ESSENTIALS IN 3DEXPERIENCE 2017x USING SIMULIA/CATIA APPLICATIONS SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationRotordynamics in ANSYS
Rotordynamics in ANSYS 1 ASME Turbo Expo 2013 Dave Looman Tech. Support Mgr. Rotordynamics in ANSYS - Outline Introduction ANSYS Rotordynamics capabilities by analysis type Continuing Rotordynamics Enhancements
More informationDhanalakshmi College Of Engineering
Dhanalakshmi College Of Engineering Manimangalam, Tambaram, Chennai 601 301 DEPARTMENT OF MECHANICAL ENGINEERING ME 6711 SIMULATION AND ANALYSIS LABORATORY VII SEMESTER - R 2013 LABORATORY MANUAL Name
More information1. The program has automatic generation of technical reports using customized Word templates as *.dotx-files.
SOFTWARE FOR SIMULATION AND OPTIMIZATION OF METAL FORMING PROCESSES AND PROFILE EXTRUSION QForm VX 8.2.3 new facilities and features October 2017 The new version of QForm has some amazing new features,
More informationCE366/ME380 Finite Elements in Applied Mechanics I Fall 2007
CE366/ME380 Finite Elements in Applied Mechanics I Fall 2007 FE Project 1: 2D Plane Stress Analysis of acantilever Beam (Due date =TBD) Figure 1 shows a cantilever beam that is subjected to a concentrated
More informationProblem description. Problem 65: Free convection in a lightbulb. Filament (Tungsten): Globe (Glass): = FSI boundary. Gas (Argon):
Problem description This tutorial demonstrates the use of ADINA for analyzing the fluid flow and heat transfer in a lightbulb using the Thermal Fluid-Structure Interaction (TFSI) features of ADINA. The
More information2D CAD. Courseware Issued: DURATION: 64 hrs
2D CAD Introduction File management Orthographic drawings View management Display management Layer management Selection methods Parametric drawings Symbol creation using block BOM / Joinery details creation
More informationIntroduction to MSC.Patran
Exercise 1 Introduction to MSC.Patran Objectives: Create geometry for a Beam. Add Loads and Boundary Conditions. Review analysis results. MSC.Patran 301 Exercise Workbook - Release 9.0 1-1 1-2 MSC.Patran
More informationModule 1.6: Distributed Loading of a 2D Cantilever Beam
Module 1.6: Distributed Loading of a 2D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing
More informationParametric. Practices. Patrick Cunningham. CAE Associates Inc. and ANSYS Inc. Proprietary 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved.
Parametric Modeling Best Practices Patrick Cunningham July, 2012 CAE Associates Inc. and ANSYS Inc. Proprietary 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved. E-Learning Webinar Series This
More informationWriting User Subroutines with Abaqus. Abaqus 2017
Writing User Subroutines with Abaqus Abaqus 2017 About this Course Course objectives In this course you will learn about: When and how to use subroutines DLOAD, VDLOAD, and UTRACLOAD for specifying user-defined
More informationCompany VictoLab Services Presentation VKRT 2013
Company VictoLab Partner in Product Development on request, specialized in rubber material and modeling. From an idea of a customer until a validated product. All steps of the product development process,
More informationEurocodes and Innovation. Developments in Finite Element Analysis for Bridges
Eurocodes and Innovation Developments in Finite Element Analysis for Bridges Developments in Finite Element Analysis for Bridges Ease of Use Vehicle Loading - Autocombinations Cable Tuning Construction
More informationFINITE ELEMENT ANALYSIS OF A PLANAR TRUSS
Problem Description: FINITE ELEMENT ANALYSIS OF A PLANAR TRUSS Instructor: Professor James Sherwood Revised: Dimitri Soteropoulos Programs Utilized: Abaqus/CAE 6.11-2 This tutorial explains how to build
More informationIntroduction to Abaqus. About this Course
Introduction to Abaqus R 6.12 About this Course Course objectives Upon completion of this course you will be able to: Use Abaqus/CAE to create complete finite element models. Use Abaqus/CAE to submit and
More information#SEU Welcome! Solid Edge University 2016
#SEU 2016 Welcome! Solid Edge University 2016 Realize innovation. Fundamental Simulation Capabilities in Solid Edge Craig Ruchti, Solid Edge Global Technical Business Development Realize innovation. Fundamental
More informationModule 3: Buckling of 1D Simply Supported Beam
Module : Buckling of 1D Simply Supported Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing 9 Solution
More informationAppendix A: Mesh Nonlinear Adaptivity. ANSYS Mechanical Introduction to Structural Nonlinearities
Appendix A: Mesh Nonlinear Adaptivity 16.0 Release ANSYS Mechanical Introduction to Structural Nonlinearities 1 2015 ANSYS, Inc. Mesh Nonlinear Adaptivity Introduction to Mesh Nonlinear Adaptivity Understanding
More informationCase Study- Importing As-Molded Plastic Part Conditions into CAE tools
1 IEI Innova Engineering 1 Park Plaza Suite 980 Irvine, California 92614 Case Study- Importing As-Molded Plastic Part Conditions into CAE tools 2 CONTENTS CONTENTS... 2 EXECUTIVE SUMMARY... 3 APPROACH...
More informationCOMPUTER AIDED ENGINEERING. Part-1
COMPUTER AIDED ENGINEERING Course no. 7962 Finite Element Modelling and Simulation Finite Element Modelling and Simulation Part-1 Modeling & Simulation System A system exists and operates in time and space.
More informationFEMAP FEMAP Modeler. Meshing: Subdivision and semi-automatic meshing of solids Automatic and mapped meshing (with quads or bricks), including biasing
FEMAP FEMAP Modeler Overview FEMAP V9.3 is a Windows-native pre- and post-processor used by engineering organizations world wide to model various products, processes, and systems. Its graphical user interface
More information