10GB ETHERNET SFP+ ULTRA LOW POWER SR OPTICAL TRANSCEIVER
|
|
|
- Monica Nash
- 6 years ago
- Views:
Transcription
1 OPTICAL INTERCONNECT 10GB ETHERNET SFP+ ULTRA LOW POWER SR OPTICAL TRANSCEIVER OVERVIEW FCI s TRX10GVP2010C2 10Gb/s Ethernet 850nm Multi Mode SFP+ SR Optical Transceiver is designed for datacenter networking links up to 400m and uses half the power of competitive options. The TRX10GVP2010C2 is compliant with SFP+ MSA specifications (SFF-8431, SFF-8432, SFF-8472), 10 Gigabit Ethernet specifications (10GBASE-SR/SW), and also 10G Fibre Channel (1200-MX-SN-I). It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1 safety compliant per IEC/CDRH. The TRX10GVP2010C2 is the most power efficient way to transmit optical 10Gb Ethernet traffic in the datacenter. FEATURES Ultra Low Power Consumption at 0.25W Typical Supports Commercial Temperature Range Ethernet 10GBASE-SR/SW Compliance Fibre Channel 1200-MX-SN-I Compliance SFF-8431 SFP+ Electrical MSA Compliance SFF-8436 SFP+ Mechanical MSA Compliance BENEFITS Lowers energy cost Simplifies thermal management Operates over temperature range of 0 C to +70 C (case) Ethernet Transmission distance up to 400m (multi mode fibre) Interoperable with other 10GBASE-SR/SW compatible transceivers Fibre Channel Transmission distance up to 400m (multi mode fibre) Electrically interoperable with all SFP+ ports Mechanically interoperable with all SFP+ ports Supports duplex LC optical connectors SFF-8472 SFP+ Diagnostic Interface MSA Compliance Data rate transparent from 9.95Gb/s to 11.3Gb/s Laser Class 1 IEC / CDRH compliant ROHS 6/6 Compliance Allows for connection discovery and signal condition monitoring Supports Non-standard protocols in this range of data rates Eye-safe laser source Does not contain hazardous materials
2 10GB ETHERNET SFP+ ULTRA LOW POWER SR OPTICAL TRANSCEIVER TECHNICAL INFORMATION MATERIALS Mates with: Board Connector: FCI/PN series Cage: 1x4 cage configuration- FCI P/N , & series 1x2 cage configuration- FCI P/N & series 1x4 cage configuration- FCI P/N , & series LC Interface: FCI/P/N series ELECTRICAL PERFORMANCES Power Supply Voltage: 3.3V Data Rate per Lane: 10Gbps Power Consumption: 0.25W (typ.) Transmitter Type: 850mm VCSEL laser Receiver Type: PIN-diode ENVIRONMENTAL RoHS 6/6 compliant Laser Class 1 / CDRH Operating Temperature Range: 0 C to 70 C SPECIFICATIONS Module meets MSA -Small Form Factors SFF-8431 / Electrical SFF-8432 / Mechanical SFF-8472 / Diagnostic Product Specification: GS APPROVALS AND CERTIFICATIONS UL: E TUV: FDA: PACKAGING Individual Blister Package SUPPORTED STANDARDS 10GBASE-SR per IEEE GBASE-SW per IEEE TARGET MARKETS/APPLICATIONS Communications Switches Data Data Center High Performance Computing Industrial PART NUMBERS TRX10GVP2010C2 ENXXXX-YYYYY Made in China Application Standard Part Number 10G Ethernet LAN IEEE 802.3ae 10GBASE-SR TRX10GVP2010C2 10G Ethernet WAN IEEE 802.3ae 10GBASE-SW TRX10GVP2010C2 10G Fibre Channel Fibre Channel 1200-MX-SN-I TRX10GVP2010C2 OPISFP+SRCOB0115EA4 For more information, please contact: Communications@fci.com or visit us at Disclaimer Please note that the above information is subject to change without notice.
3 OPTICAL INTERCONNECT 10GB ETHERNET SFP+ LRM OPTICAL TRANSCEIVER OVERVIEW FCI s TRX10GDL0610C3 10Gb/s Ethernet 1310nm Multi Mode SFP+ LRM Optical Transceiver is designed for 10Gb Ethernet using legacy fiber. Links up to 220m can be made over FDDIquality fiber links and over OM1/2/3/4 multimode fiber. The TRX10GDL0610C3 is compliant with SFP+ MSA specifications (SFF-8431, SFF-8432, SFF-8472), and 10 Gigabit Ethernet specifications (10GBASE-LRM). It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1 safety compliant per IEC/CDRH. The TRX10GDL0610C3 improves cost efficiency of 10GbE upgrades by re-using existing structured fiber cable. FEATURES Supports Commercial Temperature Range Ethernet 10GBASE-LRM Compliance SFF-8431 SFP+ Electrical MSA Compliance SFF-8436 SFP+ Mechanical MSA Compliance SFF-8472 SFP+ Diagnostic Interface MSA Compliance Data rate transparent from 9.95Gb/s to 11.3Gb/s Low Power Consumption Laser Class 1 IEC / CDRH compliant RoHS 6/6 Compliance BENEFITS Operates over temperature range of 0 C to +70 C (case) Transmission distance up to 220m (multi mode fiber, including FDDI-grade) Interoperable with other 10GBASE-LRM compatible transceivers Electrically interoperable with all SFP+ ports Mechanically interoperable with all SFP+ ports Supports duplex LC optical connectors Allows for connection discovery and signal condition monitoring Supports Non-standard protocols in this range of data rates Only 0.8W (Typ.) power consumption Eye-safe laser source Does not contain hazardous materials
4 10GB ETHERNET SFP+ LRM OPTICAL TRANSCEIVER TECHNICAL INFORMATION MATERIALS Mates with: Board Connector: FCI P/N series Cage: 1x1 cage configuration- FCI P/N , & series 1x2 cage configuration- FCI P/N & series 1x4 cage configuration- FCI P/N , & series LC interface: FCI P/N series ELECTRICAL PERFORMANCE Power Supply Voltage: 3.3V Data Rate per Lane: 10Gbps Power Consumption: 0.55W (typ.) Transmitter Type: 850 nm VCSEL laser Receiver Type: PIN-diode ENVIRONMENTAL RoHS 6/6 compliant Laser Class 1 / CDRH Operating Temperature Range: 0 C to 70 C PART NUMBERS SPECIFICATIONS Module meets MSA Small Form Factors SFF-8431 / Electrical SFF-8432 / Mechanical SFF-8472 / Diagnostic Product Specification: GS APPROVAL AND CERTIFICATIONS UL : E TUV : FDA : PACKAGING Individual Blister Package SUPPORTED STANDARDS 10GBASE-LRM per IEEE TARGET MARKET/ APPLICATIONS Communications Switches Data Data Center High Performance Computing Industrial TRX10GDL0610C3 EM MS Made in China Laser Class1 21 CFR & Application Standard Part Number 10G Ethernet IEEE GBASE-LRM TRX10GDL0610C3 OPISFP+LRM0714EA4 For more information, please contact: Communications@fci.com or visit us at Disclaimer Please note that the above information is subject to change without notice.
5 OPTICAL INTERCONNECT 10GB ETHERNET SFP+ LR OPTICAL TRANSCEIVER OVERVIEW FCI s TRX10GDP0310C1 10Gb/s Ethernet 1310nm Single Mode SFP+ LR Optical Transceiver is designed for 10km datacenter networking links. The TRX10GDP0310C1 is compliant with SFP+ MSA specifications (SFF-8431, SFF-8432, SFF-8472), 10 Gigabit Ethernet specifications (10GBASE-LR/LW), and also 10G Fibre Channel (1200-SM-LL-L). It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1 safety compliant per IEC/CDRH. Today s datacenters are larger than ever and the 10km reach of the TRX10GDP0310C1 is more than sufficient to make these connections. FEATURES Supports Commercial Temperature Range Ethernet 10GBASE-LR/LW Compliance Fibre Channel 1200-SM-LL-L Compliance SFF-8431 SFP+ Electrical MSA Compliance SFF-8436 SFP+ Mechanical MSA Compliance SFF-8472 SFP+ Diagnostic Interface MSA Compliance Data rate transparent from 9.95Gb/s to 11.3Gb/s Low Power Consumption BENEFITS Operates over temperature range of 0 C to +70 C (case) Ethernet Transmission distance up to 10km (single mode fiber) Interoperable with other 10GBASE-LR/LW compatible transceivers Fibre Channel Transmission distance up to 10km (single mode fiber) Electrically interoperable with all SFP+ ports Mechanically interoperable with all SFP+ ports Supports duplex LC optical connectors Allows for connection discovery and signal condition monitoring Supports Non-standard protocols in this range of data rates Only 0.75W (Typ.) power consumption
6 10GB ETHERNET SFP+ LR OPTICAL TRANSCEIVER TECHNICAL INFORmATION materials Mates with: Board Connector: F Cage: 1x1 cage configuration- FCI P/N , & series 1x2 cage configuration- FCI P/N & series 1x4 cage configuration- FCI P/N , & series LC interface: FCI P/N series ELECTRICAL PERFORmANCE Power Supply Voltage: 3.3V Data Rate per Lane: 10 Gbps Power Consumption: 0.75 (typ.) Transmitter Type: 1310 nm DFB laser Receiver Type: PIN-diode ENVIRONmENTAL RoHS 6/6 Compliant Laser Class 1/ CDHR SPECIFICATIONS Module meets MSA- Small Form Factor SFF-8431/ Electrical SFF-8432/ Mechanical SFF-8472/ Diagnostic Product Specification: GS APPROVALS AND CERTIFICATIONS TUV: UL: E FDA: PACKAGING Individual Blister Package TARGET market/ APPLICATIONS Communications Switches Data Data Center High Performance Computing Industrial & Instrumentation Operating Temperature Range: 0 C to 70 C PART NUmBERS TRX10GDP0310C1 EM MS Made in China Laser Class1 21 CFR & Application Standard Part Number 10G Ethernet LAN/WAN IEEE GBASE - LR/LM TRX10GDP0310C1 OPISFP+LROT0714EA4 For more information, please contact: Communications@fci.com or visit us at Disclaimer Please note that the above information is subject to change without notice.
7 OPTICAL INTERCONNECT 10GB ETHERNET SFP+ INDUSTRIAL TEMPERATURE LR OPTICAL TRANSCEIVER OVERVIEW FCI s TRX10GDP0311A1 10Gb/s Single Mode Telecom SFP+ LR Optical Transceiver is designed for 10km outdoor networking links and other applications requiring an Industrial grade operational temperature range. The TRX10GDP0311A1 is compliant with SFP+ MSA specifications (SFF-8431, SFF-8432, SFF-8472), 10 Gigabit Ethernet specifications (10GBASE-LR/LW), and also 10G Fibre Channel (1200-SM-LL-L). It is RoHS 6/6 compliant per Directive 2002/95/EC and laser class 1 safety compliant per IEC/CDRH. The wide operating temperature range of -40 C to +85 C allows the TRX10GDP0311A1 to operate in the most demanding environments. FEATURES Supports Industrial Temperature Range Ethernet 10GBASE-LR/LW Compliance Fibre Channel 1200-SM-LL-L Compliance SFF-8431 SFP+ Electrical MSA Compliance SFF-8436 SFP+ Mechanical MSA Compliance SFF-8472 SFP+ Diagnostic Interface MSA Compliance Data rate transparent from 9.95Gb/s to 11.3Gb/s Low Power Consumption Laser Class 1 IEC / CDRH compliant RoHS 6/6 Compliance BENEFITS Operates over an extended temperature range of -40 C to +85 C (case) Ethernet Transmission distance up to 10km (single mode fiber) Interoperable with other 10GBASE-LR/LW compatible transceivers Fibre Channel Transmission distance up to 10km (single mode fiber) Electrically interoperable with all SFP+ ports Mechanically interoperable with all SFP+ ports Supports duplex LC optical connectors Allows for connection discovery and signal condition monitoring Supports Non-standard protocols in this range of data rates 0.8W (Typ.) power consumption Eye-safe laser source Does not contain hazardous materials
8 10GB ETHERNET SFP+ INDUSTRIAL TEMPERATURE LR OPTICAL TRANSCEIVER TECHNICAL INFORMATION MATERIALS Mates with: Board Connector: FCI P/N series Cage: 1x1 cage configuration- FCI P/N , & series 1x2 cage configuration- FCI P/N & series 1x4 cage configuration- FCI P/N , & series LC interface: FCI P/N series ELECTRICAL PERFORMANCE Power Supply Voltage: 3.3V Data Rate per Lane: 10Gbps Power Consumption: 0.80W (typ.) Transmitter Type: 1310 nm DFB laser Receiver Type: PIN-diode ENVIRONMENTAL RoHS 6/6 compliant Laser Class 1 / CDHR Operating Temperature Range: -40 C to +85 C Temperature Life - EIA , Method A, Condition 3, Time Condition C, 500 hours, 85 C Mixed Flowing Gas - EIA , Class IIA - 10 days unmated and 10 days mated (EIA ) SPECIFICATIONS Module meets MSA Small Form Factors SFF-8431 / Electrical SFF-8432 / Mechanical SFF-8472 / Diagnostic Product Specification: GS APPROVALS AND CERTIFICATIONS TUV : EN :2001 FDA : CDRH 21 CFR and PACKAGING Individual Blister Package SUPPORTED STANDARDS 10GBASE-LR per IEEE GBASE-LW per IEEE GFC per 1200-SM-LL-L TARGET MARKET/ APPLICATIONS Communications Wireless Infrastructure Switches Data Data Center High Performance Computing Industrial Uncontrolled temperature environments PART NUMBERS TRX10GDP0311A1 MECHANICAL SAMPLE Made in China. Nan Tong,1403 Class1 Laser 21 CFR & Application Standard Part Number 10G Ethernet LAN/WAN IEEE GBASE-LR/LW TRX10GDP0311A1 10G Fibre Channel 1200-SM-LL-L TRX10GDP0311A1 OPISFP EA4 For more information, please contact: Communications@fci.com or visit us at Disclaimer Please note that the above information is subject to change without notice.
Cisco 10GBASE SFP+ Modules
Cisco 10GBASE SFP+ Modules Product Overview The Cisco 10GBASE SFP+ modules (Figure 1) offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet,
10-GbE XFP and SFP+ Transceiver Modules
LXP-10G-MMLC LXP-10G-SMCL10 LXP-10G-CX4 Product Data Sheet 10-GbE XFP and SFP+ Transceiver Modules Overview The 10-GbE XFP and SFP+ Transceiver Modules enable you to take advantage of 10-GbE connectivity.
ExtremeSwitching TM. 100Gb Ethernet QSFP28 Transceivers and Cables. Product Overview. Data Sheet. Highlights. 100Gb Ethernet QSFP28 SR4 MMF
Data Sheet Highlights Compact Quad Small Form-factor Pluggable (QSFP28) products for high density 100Gb Ethernet applications Hot swappable, field serviceable modular interfaces for Extreme Networks switches
Cisco 10GBASE SFP+ Modules
Data Sheet Cisco 10GBASE SFP+ Modules Product Overview The Cisco 10GBASE SFP+ modules (Figure 1) offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring
McAfee Network Security Platform
Revision D McAfee Network Security Platform (M-series Transceiver Modules Reference Guide) COPYRIGHT Copyright 2018 McAfee, LLC TRADEMARK ATTRIBUTIONS McAfee and the McAfee logo, McAfee Active Protection,
TRS5020EN-S001-W. Preliminary Technical Data (February 14 th, 2008)
Preliminary Technical Data (February 14 th, 2008) TRS5020EN-S001-W 10 Gigabit/s SFP+ Transceiver All specifications described herein are subject to change without prior notice TRS5020EN-S001-W: 10GBASE-LR
Datasheet. XFP Optical Transceiver Product Features XFP-10G-K010B33. Applications. Description. XFP Single Fiber 10 km transceiver 10G LR Ethernet
XFP Optical Transceiver Product Features 10GBASE-LR/LW Ethernet 9 XFP 10 km LR XFP for SMF @ 10Gbps 1330Tx-1270Rx DFB+PIN Laser 10 km XFP 0 C - 70 C Temperature - Extended/Industrial Available 2-Wire Interface
Data Center Connectivity
Data Center Connectivity Active Optical Cable 40G QSFP+ to QSFP+ Full Duplex 4 Channel 850nm Parallel Active Optical Cable Cable Length:1m/2m/5m/10m/20m/30m/50m Low power consumption: less than 1.5 W per
81.X111GSR1131S-TP 10Gb/s 850nm Multimode XFP Optical Transceiver
81.X111GSR1131S-TP 10Gb/s 850nm Multimode XFP Optical Transceiver PRODUCT FEATURES Hot-pluggable XFP footprint Supports 9.95Gb/s to 11.3Gb/s bit rates XFI Loopback Mode Power dissipation
40GBase QSFP+ PSM4 1.5km Optical Transceiver
40GBase QSFP+ PSM4 1.5km Optical Transceiver PRODUCT FEATURES Supports 41.2 Gb/s aggregate bit rates Link Distance up to 1.5km over SMF fiber 4 parallel 10Gbps full duplex channels Standard 12-fiber MPO/MTP
Datasheet. XENPAK Optical Transceiver Product Features XEN-10G-K010T31. Applications. Description. XENPAK 10 km transceiver 10G LR Ethernet
XENPAK Optical Transceiver Product Features 1GBASE-LR/LW Ethernet 8.4 XENPAK 1 km LR XENPAK for SMF @ 1Gbps 131nm DFB+PIN Laser 1 km XENPAK C - 7 C Temperature - Extended/Industrial Available 2-Wire Interface
GP-XFP-1L-LEG. 10Gbs XFP Transceiver
Part# 39716 GP-XFP-1L-LEG CISCO COMPATIBLE 10GBASE-LR XFP SMF 1550NM 10KM REACH LC DOM GP-XFP-1L-LEG 10Gbs XFP Transceiver Features Duplex LC connector Support hot-pluggable Metal with lower EMI Excellent
10G SFP + Bi-di Transceiver Hot Pluggable, single LC, 1270nm/1330nm, DFB LD, Single Mode, 20km PSFP F/PSFP F
DATASHEET DESCRIPTION: PeakOptical Bi-directional PSFP10-2733/PSFP10-3327 10Gb/s (SFP+) transceivers are compliant with the current SFP+ Multi- Source Agreement (MSA) Specification. They comply with 10GBASE-LR/LW
Product Specification. 10Gb/s 10km Datacom XFP Optical Transceiver FTRX-1411D3
Product Specification 10Gb/s 10km Datacom XFP Optical Transceiver FTRX-1411D3 PRODUCT FEATURES Supports 9.95Gb/s to 10.5Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km Uncooled 1310nm
Cisco 25GBASE SFP28 Modules
Data Sheet Cisco 25GBASE SFP28 Modules Product Overview The Cisco 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of highdensity and low-power 25 Gigabit Ethernet
Voltage (V) QSFP+ AOC 40G MMF 2m AC/AC Y 0 ~ +70 AQOA9N02ADLN0720. QSFP+ AOC 40G MMF 2.5m AC/AC Y 0 ~ +70 AQOA9N2AADLN0720
AQOA9NxxADLN0720 Features Applications 40Gb/s Ethernet 40GBASE SR4 Infiniband QDR and DDR interconnects Proprietary multi channel links QSFP Type AOC Transceiver 850nm VCSEL Laser 40Gb/s aggregated bidirectional
OP-SFP Gbps SFP+ Transceiver
10.3Gbps SFP+ Transceiver Product Description The OP-SFP + -300 series multi-mode transceivers are SFP + module for bi-directional serial optical data communications such as10gbase-sr and 10GBASE-SW. It
QSFP+ 40G MPO MMF 850nm 300m Transceiver AQOMSN85ADLN0669. Features. Applications. Ordering Information APPLIED OPTOELECTRONICS, INC.
Features Applications 40Gb/s Ethernet 40GBASE SR4 Compliant with QDR/DDR Infiniband data rates Proprietary multi channel links QSFP MPO Type Transceiver 850nm VCSEL Laser 40Gb/s aggregated bidirectional
SFP+ Dual LC 10G SMF 80Km DWDM 50GHz Transceiver. Features. Applications APPLIED OPTOELECTRONICS, INC. A7ELZQxxFDMAx542
Features Applications 10GBASE-ZR Ethernet ( 9.95 to 10.31Gbps ) SONET OC-192 / SDH STM-64 ( 9.953Gbps ) SFP+ Type Dual LC Transceiver C-Band Wavelengths on 50GHz ITU Grid DWDM EML Laser APD Photo Detector
Cisco 100GBASE QSFP-100G Modules
Data Sheet Cisco 100GBASE QSFP-100G Modules Product Overview The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit
Cisco XFP Modules for 10 Gigabit Ethernet and Packet Over-Sonet Applications
Data Sheet Cisco XFP Modules for 10 Gigabit Ethernet and Packet Over-Sonet Applications The Cisco XFP Module (Figure 1) offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS)
Pluggable Transceivers Industry standard Pluggable Transceivers and Direct Attach Cables
DATASHEET Pluggable Transceivers Industry standard Pluggable Transceivers and Direct Attach Cables Product Overview Modular Ethernet interfaces from 100Mbps to 40Gbps Support for a large variety of cable
10Gpbs 10km Range 1310nm XFP Optical Transceiver
Page 1 of 7 Overview ARIA s 10Gbps 10km Range 1310nm XFP Optical Transceiver is compliant with the 10G Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA) supporting data-rates of 10.3125 Gbps
Parameter Symbol Min. Typical Max. Unit Storage Temperature T S C Supply Voltage V CC T, R V Relative Humidity RH 0 85 %
Features: Supports 8.5Gb/s to 11.3Gb/s bit rates Hot-pluggable SFP+ footprint Single LC for Bi-directional Transmission Maximum link length of 40km Built-in 1270 WDM Uncooled 1270nm DFB Laser. Power dissipation
VE883. 4K HDMI Optical Extender (K1, MM) / 10km (K2, SM))
VE883 4K HDMI Optical Extender (4K@300m (K1, MM) / 10km (K2, SM)) The VE883 is a fiber-based extender designed to extend uncompressed 4K signal up to 300 m (using VE883K1) or 10 km (using VE883K2) over
10 Gigabit Ethernet Copper-to-Fiber Media Converter - Open SFP+ - Managed
10 Gigabit Ethernet Copper-to-Fiber Media Converter - Open SFP+ - Managed Product ID: ET10GSFP This 10GbE fiber media converter lets you scale your network using the 10Gb SFP+ transceiver that best suits
Optics Modules and Cables Data Sheet
Key Features Deployment flexibility of 100GbE, 40GbE, 10GbE or 1GbE modules Smallest and lowest power 10GbE optic module form factor Hot swappable to maximize uptime and simplify serviceability SFP+ Optical
XFP 10G Transceiver M10GB-XFP-BIDI40
XFP 10G Transceiver M10GB-XFP-BIDI40 Features: Supports 9.95Gb/s to 11.3Gb/s bit rates Hot-pluggable XFP footprint Single LC for Bi-directional Transmission Maximum link length of 40km Built-in 1270/1330
Cisco 100GBASE QSFP-100G Modules
Data Sheet Cisco 100GBASE QSFP-100G Modules Product Overview The Cisco 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION P/N AC-XF-3G10-10 Description 10Gb/s 1310nm XFP 10km Optical Transceiver Version A0 Issue Date 2015.06.07 Prepared By Checked By Approved By Jason Qi Wenshan Yang Nan Wang AC-XF-3G10-10
X2 Single Fiber 10 km transceiver Cisco Compatible 10G LR Ethernet Designed for OEM networks such as Cisco, HP, Juniper, Brocade, Alcatel etc.
Designed for OEM networks such as Cisco, HP, Juniper, Brocade, Alcatel etc. X2 Optical Transceiver Product Features Exclusive Japanese OSAs for Ultimate Reliability 1GBASE-LR/LW Ethernet 9 X2 1 km LR X2
Datasheet. SONET/SDH SFP+ Optical Transceiver Product Features SPS-81D-K010T31. Applications. Description
SONET/SDH SFP+ Optical Transceiver Product Features SONET OC-192 / STM-64 w/ CDR 8.4 SONET/SDH SFP+ 1 km LR SONET/SDH SFP+ for SMF @ 1Gbps 131nm DFB+PIN Laser 1 km SONET/SDH SFP+ C - 7 C Temperature -
Cisco MDS 9000 Family Pluggable Transceivers
Cisco MDS 9000 Family Pluggable Transceivers The Cisco Small Form-Factor Pluggable (), and X2 devices for use on the Cisco MDS 9000 Family are hot-swappable transceivers that plug into ports on the Cisco
SFP LC 5G SMF DWDM Transmitter. Features. Applications APPLIED OPTOELECTRONICS, INC. A5ILZDxxSDOA0759
APPLIED OPTOELECTRONICS, I. Features Applications 5G Applications XAUI/OBSAI/CPRI (3.125G) Fiber Channel 3xFC (3.1875G) SONET OC48 / SDH STM16 (2.488Gbps) Gigabit Ethernet / 1X/2X Fiber Channel SFP Type
10Gbps XFP Transceiver
XFP-10G-L-OC192-SR1-EO 10Gbps XFP Transceiver Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km Uncooled 1310nm EML/DFB laser Duplex LC connector
Optics Modules and Cables Data Sheet
Optics Modules and Cables Data Sheet Key Features Deployment flexibility of 100GbE, 40GbE, 25GbE, 10GbE or 1GbE modules Smallest and lowest power SFP optic module form factor for 1GbE, 10GbE and 25GbE
1-Port 10G SFP+ Fiber Optic Network Card - PCIe - Intel Chip - MM
1-Port 10G SFP+ Fiber Optic Network Card - PCIe - Intel Chip - MM Product ID: PEX10000SRI This fiber optic network card delivers reliable, high-performance network connectivity, providing an easy and cost-effective
The GLC-LH-SM-CDW is designed to be compliant with SFF-8272 SFP Multi-source Agreement (MSA).
GLC-LH-SM-CDW 1.25Gbps SFP Transceiver Features Operating data rate up to 1.25Gbps 1310nm FP LD Laser Transmitter 10Km with 50/125 µm SMF Singer 3.3 Power supply and TTL Logic interface Duplex LC Connector
XFP Series. Part No. Data Rate Laser Fiber Type Distance Temp.
EOLX-1396-20 1310nm XFP single-mode for 10GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS6 Compliant XFP Series Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link
40G QSFP LR4 optical transceiver with DDM function
This product is designed for fiber-communication based on optical-electrical technology. The product has 4 channels per transceiver with data rates maximum 10G per channel. The QSFP contains a duplex LC
AllPath OPX. Product Description. AP-4240 Features. Datasheet DS-00102
Product Description The Fiber Mountain AllPath Optical Path Exchange (OPX) product family provides any port-to-any port optical cross connect for point-to -point and point-to-multipoint applications, creating
BC D 10 Gb/s 10km XFP Optical Transceiver
BC-1396-10D 10 Gb/s 10km XFP Optical Transceiver PRODUCT FEATURES Hot-pluggable XFP footprint Supports 9.95Gb/s to 11.3Gb/s bit rates XFI Loopback Mode RoHS-6 Compliant (lead-free) Power dissipation
XFP SONET/SDH Single Fiber 10 km transceiver 10G LR SONET OC-192 / STM-64 w/ CDR. Datasheet
SONET/SDH XFP Optical Transceiver Product Features SONET OC-192 / STM-64 w/ CDR 9 SONET/SDH XFP 10 km LR SONET/SDH XFP for SMF @ 10Gbps 1270Tx-1330Rx DFB+PIN Laser 10 km SONET/SDH XFP 0 C - 70 C Temperature
Cisco UCS 6324 Fabric Interconnect
Data Sheet Cisco UCS 6324 Fabric Interconnect Cisco Unified Computing System Overview The Cisco Unified Computing System (Cisco UCS ) is a next-generation data center platform that unites computing, networking,
SHXP-10G-B60. 10Gb/s BiDi XFP Transceiver Hot Pluggable, Simplex LC, +3.3V, 1270/1330nm DFB/APD, 60km, 0~70 C /-40~ +85 C
SHXP-10G-B60 10Gb/s BiDi XFP Transceiver Hot Pluggable, Simplex LC, +3.3V, 1270/1330nm DFB/APD, 60km, 0~70 C /-40~ +85 C SHXP-10G-B60 10Gb/s BiDi optical transceiver, inter-converting the 10Gb/s serial
10G-XFP-LR (10G BASE-LR XFP) Datasheet
10G-XFP-LR (10G BASE-LR XFP) Datasheet Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm uncooled DFB laser XFP MSA package with duplex
Mb/s ATM Multi-mode Dual Transmitter
SFP, Duplex LC Connector, Dual 850 nm VCSEL for Multi-mode Fiber, RoHS Compliant Digital Diagnostics Functions, Extended Operating Temperature from 40 to +85 C RoHS Pb Features Applications Fast Ethernet
Datasheet. XFP Optical Transceiver Product Features XFP-10G-K080DXX. Applications. Description. XFP DWDM 80 km transceiver 10G ZR Ethernet
XFP Optical Transceiver Product Features 10GBASE-ZR/ZW Ethernet 23 XFP 80 km ZR XFP for SMF @ 10Gbps 100GHz (C-Band) EML+APD Laser 80 km XFP 0 C - 70 C Temperature - Extended/Industrial Available 2-Wire
RUGGEDCOM SFP Transceivers
Preface Introduction 1 RUGGEDCOM SFP Transceivers Copper SFP Transceivers 2 Fast Ethernet SFP Transceivers 3 Gigabit Ethernet SFP Transceivers 4 10-Gigabit Ethernet SFP+ Transceivers 5 Installation/Removal
Platinum OEM Series. Datasheet PSFP-MR2T85M300. SFP Optical Transceiver Product Features. Applications. Description
Designed for OEM networks such as Cisco, HP, Juniper, Brocade, Alcatel etc. SFP Optical Transceiver Product Features Exclusive Japanese OSAs for Ultimate Reliability SONET OC-48 / STM-16 9 SFP 3m SX SFP
SHPP-10G-LR. 10Gb/s SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DFB/PIN, Single mode, 10km
SHPP-10G-LR 10Gb/s SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DFB/PIN, Single mode, 10km SHPP-10G-LR is a very compact 10Gb/s optical transceiver module for serial optical communication applications
SFP+ EOLT-C GBASE-T
EOLT-C96-02 10GBASE-T Copper SFP+ Transceiver RoHS6 Compliant Copper SFP+ Series Features Support 10GBASE-T Operation in Host Systems and auto-negotiation to lower speed. Support RX_LOS as Link indication
Compact SFP (CSFP) Transceiver
SFP+, 2x Bi-Di, Dual LC Connector, 1270 nm DML for Single Mode Fiber, RoHS Compliant Digital Diagnostics Functions RoHS Pb Features Applications 10G Fibre Channel Links 10Gigabit Ethernet Links 6.144 Gb/s,
Cisco UCS 6100 Series Fabric Interconnects
Cisco UCS 6100 Series Fabric Interconnects Cisco Unified Computing System Overview The Cisco Unified Computing System is a next-generation data center platform that unites compute, network, storage access,
Part Number Operating temperature DDMI. APCS43123CDL20 Commercial Yes. APCS43123IDL20 Industrial Yes
APCS43123xxL20 Product Features Two Bi-Directional transceivers in one SFP package Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP footprint 1490nm DFB laser transmitter RoHS compliant
QFPQL010400D QSFP+ Dual Fibre CWDM ITU CWDM / 10km / 40 Gigabit Ethernet / LR-4
DATASHEET - REV A QFPQL010400D QSFP+ Dual Fibre CWDM ITU CWDM / 10km / 40 Gigabit Ethernet / LR-4 #01 Overview QFPQL010400D is a high performance QSFP+ transceiver module for 40 Gigabit Ethernet data links
40 Gigabit QSFP CWDM 1310 nm LR4 for 10 km
Features 4 CWDM lanes MUX/DEMUX design Up to 11.2Gbps data rate per wavelength QSFP MSA compliant Up to 10km transmission Operating case temperature: 0~70C Maximum 3.5W operation power RoHS compliant Applications
SFCxx100PAxD SFP Dual fibre CWDM ITU CWDM / 100km / OC-48 Multirate.
SFCxx100PAxD_RevA SFCxx100PAxD SFP Dual fibre CWDM ITU CWDM / 100km / OC-48 Multirate. For your product safety, please read the following information carefully before any manipulation of the transceiver:
Produto: 1.25Gbps SFP Optical Transceiver, 550m Reach, with DDM Modelo: V7-SFP-0301D Documentação: Técnica/Datasheet
Produto: 1.25Gbps SFP Optical Transceiver, 550m Reach, with DDM Modelo: V7-SFP-0301D Documentação: Técnica/Datasheet Features Data-rate of 1.25Gbps operation 850nm VCSEL laser and PIN photodetector Compliant
Electromagnetic Interference (EMI) FCC Part 15 Class B Compatible with standards. FDA 21CFR and EN60950, EN (IEC) ,2
CFP2-100GB-LR4-LEG 100GBASE-LR4 CFP SMF 1310NM 10KM REACH LC DOM CFP2-100GB-LR4-LEG 100Gbase CFP Transceiver Features Operating optical data rate up to 112Gbps Transmission distance up to 10km CFP MSA
SHXP-10G-LR. 10Gb/s XFP Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DFB/PIN, Single mode, 10km, 0~70 C /-40~ +85 C
SHXP-10G-LR 10Gb/s XFP Transceiver Hot Pluggable, Duplex LC, +3.3V, 1310nm DFB/PIN, Single mode, 10km, 0~70 C /-40~ +85 C SHXP-10G-LR inter-converting the 10Gb/s serial electrical data stream with the
Stride SE2 Series Unmanaged Industrial Ethernet Switches and Media Converters
Ethernet Switches and Media Converters SE2 Series DIN Rail mounted switches Features Broadcast storm protection Wide temp range option Optional panel mounting accessory 12, 24, 48 VDC & 18-30 VAC redundant
Product Specification
Product Specification RoHS-6 Compliant Laserwire SFP+ Adapter FTLX007D4BNL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports Laserwire datarates ( Gbps to 0.3 Gbps) RoHS-6 compliant (lead-free) Extended
SFP+ Dual LC 10G SMF 80Km DWDM 50GHz Transceiver. Features. Applications APPLIED OPTOELECTRONICS, INC. A7ELZQxxFDMAx641
Applications 10GBASE-ZR Ethernet ( 9.95 to 10.31Gbps ) SONET OC-192 / SDH STM-64 ( 9.953Gbps ) Features SFP+ Type Dual LC Transceiver C-Band Wavelengths on 50GHz ITU Grid DWDM EML Laser APD Photo Detector
Overview Brochure Direct attach and active optical cables
Overview Brochure Direct attach and active optical cables Contact us on: Tel: 01189 122 980 Email: sales@cabcon.co.uk www.sterlingcablingsolutions.co.uk Contents High Speed Cables and Transceivers page
Cable Length Description
EOLQ-40G-CLB-XX-XXP4I QSFP to SFP+ Direct Attach Cables, 0.5m/1m/2m/3m Reach RoHS6 Compliant Features Support 4 lanes of 10 Gb/s AC coupling of PECL signals 100 ohm differential impedance system Power
Fiber Optic Cabling Systems for High Performance Applications
Fiber Optic Cabling Systems for High Performance Applications BICSI Conference Bangkok, Thailand 17-18 November 2016 Nicholas Yeo, RCDD/NTS/DCDC Data Center Trends Computing evolution Cloud computing Servers
PE310G2SPT10 Dual Port SFP+ 10 Gigabit Ethernet PCI Express Server Adapter Broadcom BCM57810S Based
PE310G2SPT10 Dual Port SFP+ 10 Gigabit Ethernet PCI Express Server Adapter Broadcom BCM57810S Based Product Description The Silicom 10Gigabit PCI Express TOE server adapters provide a fully integrated
JCP-SFP-RJ45. Copper SFP+ Series. Features. Applications. Order Information. 10GBASE-T Copper SFP+ Transceiver RoHS6 Compliant. Data Rate.
JCP-SFP-RJ45 10GBASE-T Copper SFP+ Transceiver RoHS6 Compliant Copper SFP+ Series Features Support 10GBASE-T Operation in Host Systems Support RX_LOS as Link indication function Hot-Pluggable SFP Footprint
Voltage (V) QSFP+ to 4xSFP+ 40G MMF 1M AC/AC Y 0 ~ +70 AKOA9N01ADLN0721. QSFP+ to 4xSFP+ 40G MMF 2M AC/AC Y 0 ~ +70 AKOA9N02ADLN0721
Features Applications 40Gb/s Ethernet 40GBASE SR4 Infiniband QDR and DDR interconnects Proprietary multi channel links QSFP+ to 4xSFP+ AOC type transceiver 850nm VCSEL Laser 40Gb/s aggregated bidirectional
SHFP-GE-EX. 1.25Gb/s SFP Transceiver Hot Pluggable, Duplex LC, +3.3V, 1550nm DFB/PIN, Single mode, 40km, 0~70 C
SHFP-GE-EX 1.25Gb/s SFP Transceiver Hot Pluggable, Duplex LC, +3.3V, 1550nm DFB/PIN, Single mode, 40km, 0~70 C SHFP-GE-EX high performance, cost effective transceiver complies with the Small Form Factor
Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications
Data Sheet Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output
QFPQL002400D QSFP+ Dual Fibre CWDM ITU CWDM / 2km / 40 Gigabit Ethernet / IR-4
QFPQL002400D QSFP+ Dual Fibre CWDM ITU CWDM / 2km / 40 Gigabit Ethernet / IR-4 For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD This
SFP+ Active Optical Cable
SFP+ Active Optical Cable Preliminary Features RoHS-6 compliant High speed / high density: support up to 10 Gb/s bi-directional operation Compliant to industrial standard SFP MSA Low power consumption
GLC-FE-100FX-RGD-LEG. 155Mbps SFP Transceiver
39491 GLC-FE-100FX-RGD-LEG CISCO 100BASE-FX SFP MMF 1310NM 2KM REACH LC RGD GLC-FE-100FX-RGD-LEG 155Mbps SFP Transceiver Features Operating Data Rate up to 155Mbps 1310 FP Laser transmitter 2km with 50/125
Cisco 40GBASE QSFP Modules
Data Sheet Cisco 40GBASE QSFP Modules Product Overview The Cisco 40GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 40 Gigabit Ethernet
DC Network Connectivity
DC Network Connectivity Options & Optimizing TCO Rakesh SAMBARAJU - Application Engineer Nexans Data Center Solutions Agenda l Part I Ethernet Standards and Technologies Ø Current Ethernet Standards Ø
QFPQL002400U QSFP+ Dual Fibre ITU CWDM / 2km / 40 Gigabit Ethernet / 40GBASE-LX4
QFPQL002400U QSFP+ Dual Fibre ITU CWDM / 2km / 40 Gigabit Ethernet / 40GBASE-LX4 For your product safety, please read the following information carefully before any manipulation of the transceiver: ESD
Everything you wanted to know about cabling, but were afraid to ask
Everything you wanted to know about cabling, but were afraid to ask Join the teleconference To receive a call back, click Communicate/Teleconference/Join Teleconference. In the pop-up window, enter your
Parameter Symbol Min Max Unit
Features: Supports 9.95Gb/s to 11.3Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 20km 1310nm DFB laser transmitter. Duplex LC connector Power dissipation
T A S A 1 E H
Specification Small Form Factor Pluggable Duplex LC Receptacle SFP28 Optical Transceivers Module 25GBASE-SR, CT Ordering Information T A S A 1 E H 1 8 3 4 Model Name Voltage Category Device type Interface
10G-XFP-ER (10G BASE-ER XFP) Datasheet
10G-XFP-ER (10G BASE-ER XFP) Datasheet Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm uncooled DFB laser XFP MSA package with duplex
PE210G2P316 Dual Port 10 Gigabit Ethernet PCI Express Packet Processor Server Adapter
PE210G2P316 Dual Port 10 Gigabit Ethernet PCI Express Product Description Silicom s 10 Gigabit Ethernet PCI Express NetLogic Packet Processor Server adaptor is targeted for network applications, such as
OPTOSTAR's OP-MDCX8xxL1SD-40 10G Cooled EML XFP DWDM transceivers are designed for 10G
10Gbps 40km XFP DWDM Optical Transceiver Product Features Duplex LC Connector Support hot-pluggable Metal with lower EMI Excellent ESD protection XFP MSA compliant RoHS Compliant and Lead-Free Compliant
Product Specification 10km 100GBASE-LR4 CFP2 Optical Transceiver Module FTLC1122RDNL
Product Specification 10km 100GBASE-LR4 CFP2 Optical Transceiver Module FTLC1122RDNL PRODUCT FEATURES Hot-pluggable CFP2 form factor Supports 103.1Gb/s aggregate bit rates Power dissipation < 5W RoHS-6
GEVISTA. CWDM Pluggable OC-48 SFP Transceiver. Description
CWDM Pluggable OC-48 SFP Transceiver Description The CWDM-OC48-xx-80 is specifically designed for the high performance integrated duplex data transmission over single mode optical fiber. This transceiver
Dell Networking Optics and Cables Connectivity Guide
Dell Networking and Cables Connectivity Guide 1 Gigabit Ethernet (1GbE) 10 Gigabit Ethernet (10GbE) 40 Gigabit Ethernet (40GbE) 100 Gigabit Ethernet (100GbE) Fibre Channel Networking I/O Connectivity Options
BROCADE OPTICS FAMILY
DATA SHEET www.brocade.com BROCADE OPTICS FAMILY IP NETWORK Highly Reliable, Brocade-Qualified Optics HIGHLIGHTS Rigorously tested for performance and reliability by Brocade Hot-swappable flexibility in
DELL EMC NETWORKING TRANSCEIVERS AND CABLES
DELL EMC NETWORKING TRANSCEIVERS AND CABLES Features and benefits Hot-swappable for simplified maintenance (no power-down required for installation or replacement) Some of the smallest and lowestpower
Fiber Optic Components Dedicated to supplying industry standard fiber optic components!
Fiber Optic Components Dedicated to supplying industry standard fiber optic components! Authorized distribution provided in alliance with Sensible Micro Corporation 13520 Prestige Place Tampa, FL 33635
SFP28 Series Preliminary EOLP-8525G-02-RI. Features. Applications. Ordering information
EOLP-8525G-02-RI 850nm SFP28 Multi-Mode Transceiver, With Diagnostic Monitoring and Dual CDR Duplex SFP28 Transceiver, RoHS 6 Compliant Features Operating data rate up to 25.78Gbps 850nm VCSEL Distance
XFP 10GLR OC192SR. 10Gbps XFP Optical Transceiver, 10km Reach
XFP 10GLR OC192SR 10Gbps XFP Optical Transceiver, 10km Reach Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm Uncooled EML laser
SBU35020DRxx SFP Single Upstream Transceiver Tx 1310nm & Rx 1550nm / 20km / Dual Rate
DATASHEET - REV A SBU35020DRxx SFP Single Upstream Transceiver Tx 1310nm & Rx 1550nm / 20km / Dual Rate #01 Overview SBU35020DRx0 is a high performance transceiver module for Gigabit Ethernet and Fast
Product Specification. 10Gbps 2KM XFP Transceiver PLXFP1310GLR02
Product Specification 10Gbps 2KM XFP Transceiver PLXFP1310GLR02 Product Features 9.95Gbps to 11.1Gbps data links 2km with 9/125µm SMF V20140818 1310nm FP laser Duplex LC Connector Hot-pluggable XFP footprint
SO-QSFP-LR4-20. QSFP, 40GBase-LR, CWDM, SM, DDM, 10dB, 20km OVERVIEW PRODUCT FEATURES APPLICATIONS ORDERING INFORMATION DATASHEET 4.
SO-QSFP-LR4-20 QSFP, 40GBase-LR, CWDM, SM, DDM, 10dB, 20km OVERVIEW The SO-QSFP-LR4-20 is a transceiver module designed for 20km optical communication applications. The design is compliant to 40GBASE-LR4
Active Optical Cable. Optical Interconnection Design Innovator 25G SFP28 AOC 10G SFP+ AOC. Shenzhen Gigalight Technology Co.,Ltd.
Optical Interconnection Design Innovator Active Optical Cable Shenzhen Gigalight Technology Co.,Ltd. Add: 17F, Zhongtai Nanshan Zhujue Building, 4269 Dongbin Road, Nanshan District, Shenzhen, Guangdong
QSFP+ Passive Copper Cable QSFP-40G-0xC
QSFP+ Passive Copper Cable QSFP-40G-0xC Features QSFP+ conforms to the Small Form Factor SFF-8436 4-Channel Full-Duplex Passive Copper Cable Transceiver Support for multi-gigabit data rates :1.0 Gbps -
H3C S12500 Routing Switch Series GE Optical Ethernet Interface Card Datasheet
H3C S12500 Routing Switch Series GE Optical Ethernet Interface Card Datasheet Copyright 2014 Hangzhou H3C Technologies Co., Ltd. All rights reserved. No part of this manual may be reproduced or transmitted
A block diagram of the HXFP-2C21XX XFP optical transceiver is shown below
Features Support 9.95 Gb/s to 10.5 Gb/s CWDM-SH application Uncooled 16-Wavelength CWDM DFB LD: 1270nm to 1610nm Up to 10Km Units Available over single mode fiber +3.3V Single power supply XFI electrical
conveniency to update the uplink port of their devices from the legacy Ethernet to up-to-date high bandwidth GPON.The GPON
SFP GPON ONT 1GE GPON SFU SFP module Description SFP GPON ONT is a GPON stick which is completely compliant to SFP MSA structure, providing customers a great conveniency to update the uplink port of their