LCP Hybrid Efficient performance with heat pipe technology

Transcription

1 LCP Hybrid Efficient performance with heat pipe technology

2 2 LCP Hybrid

3 The whole is more than the sum of its parts The same is true of "Rittal The System." With this in mind, we have bundled our innovative enclosure, power distribution, climate control and IT infrastructure products together into a single system platform. Complemented by our extensive range of software tools and global service, we create unique added value for all industrial applications: Production plant, test equipment, facility management and data centres. In accordance with our simple principle, "Faster better everywhere", we are able to combine innovative products and efficient service to optimum effect. Faster with our "Rittal The System." range of modular solutions, which guarantees fast planning, assembly, conversion and commissioning with its system compatibility. Better by being quick to translate market trends into products. In this way, our innovative strength helps you to secure competitive advantages. Everywhere thanks to global networking across 150 locations. Rittal has over 60 subsidiaries, more than 150 service partners with over 1,000 service engineers worldwide. For more than 50 years, we have been on hand to offer advice, assistance and product solutions. LCP Hybrid 3

4 4 LCP Hybrid

5 The technology Simply efficient The new LCP Hybrid ingeniously combines two facets of technology: A high overall cooling output due to the large cold water heat exchanger surface, and optimum distribution of the heat loss on the heat exchanger surface thanks to the integral heat pipe. Best of all, the LCP Hybrid does not require any fans of its own, thereby ensuring maximum efficiency. Of course, existing TS IT racks may be upgraded to the new system if required. Simply exchange the standard rear door for the LCP Hybrid, connect to an existing cold water circuit, and regain control of the climate in your data centre to ensure optimum accessibility. LCP Hybrid 5

6 The benefits Per fectly obvious 6 LCP Hybrid

7 Easily exchanged Simply exchange for the existing rear door Full accessibility of the rack from the rear is retained No additional space required Door opening angle 135 Problem-free connection Problem-free water connection from below to the fi xed part of the LCP Hybrid, eliminating the risk of unwanted water ingress into the rack No movable hose connection for the water supply Connection via an existing raised fl oor or the Flex-Block base/plinth system Ingenious technology Heat pipe with refrigerant R134a, for optimum distribution of the heat loss over the entire heat exchanger surface The fans in the IT equipment autonomously guide hot air over the high-capacity heat exchanger Optimum energy effi ciency, due to high inlet temperatures and no separate power consumption LCP Hybrid 7

8 Liquid Cooling Package Chillers for IT cooling Cat. 34, Page 441 Network/server enclosures TS IT Cat. 34, Page 92 Applications: Air/water heat exchanger for retrofi tting to TS IT racks while operational Benefits: Mounted on the rear of the server rack so that the thermal load of the server rack does not have to be dissipated by the ventilation system Even heat distribution in the heat exchanger due to the heat pipe, ensuring that the heat exchanger always has a balanced heat load A door opening angle of 135 allows rear access to the server enclosure and makes assembly and confi guration inside an enclosure easier Optimum energy effi ciency, as there is no electrical power consumption whatsoever Functions: The stand-alone unit replaces the rear door The waste air is cooled down to room temperature. The heat energy absorbed by the water is transported to the external cold water supply, where it is cooled back down to the required inlet temperature. The heat exchanger uses the airfl ow from the IT equipment and does not require any additional fans for cooling Minimal upstream and downstream pressure losses, despite the very compact design Water connection from below only Colour: RAL 7035 Cooling medium: Water (see Internet for specifi - cations) Note: The air throughput (heated waste air) from the active mm (19") components installed in the enclosure must be suffi cient to overcome the pressure loss from the perforated heat exchanger rear door The total cooling output refers to an outlet temperature of 24 C LCP Hybrid CW Model No Total cooling output kw Width mm Height mm Depth mm Usable U Fill quantity of heat pipe in g Refrigerant R134a R134a R134a R134a Water inlet temperature C ± 15 ± 15 ± 15 ± 15 Volumetric fl ow of cooling water l/min Permissible operating pressure (p max.) bar Maximum volumetric fl ow of water l/min Water connection DN 25 (G1") DN 25 (G1") DN 25 (G1") DN 25 (G1") Volumetric airfl ow (air from IT equipment) m³/h Room air temperature (air outlet temperature from LCP Hybrid) C ± 24 ± 24 ± 24 ± 24 Relative humidity % Weight as delivered kg LCP Hybrid LCP Hybrid

9 LCP Hybrid CW Liquid Cooling Package Model No Total cooling output kw Width mm Height mm Depth mm Usable U Fill quantity of heat pipe in g Refrigerant R134a R134a R134a R134a Water inlet temperature C ± 15 ± 15 ± 15 ± 15 Volumetric fl ow of cooling water l/min Permissible operating pressure (p max.) bar Maximum volumetric fl ow of water l/min Water connection DN 25 (G1") DN 25 (G1") DN 25 (G1") DN 25 (G1") Volumetric airfl ow (air from IT equipment) m³/h Room air temperature (air outlet temperature from LCP Hybrid) C ± 24 ± 24 ± 24 ± 24 Relative humidity % Weight as delivered kg Accessories Therm software see Cat. 34, page LCP Hybrid 9

10 LCP Hybrid

11 IT cooling Climate control concepts from Rittal cover the full spectrum of applications, from cooling a single rack through to entire data centres. Security plus optimum energy and cost efficiency are paramount. An extensive range of technical solutions supports individual climate control concepts for racks, suites and rooms. 4 1 Your benefits State-of-the-art climate control technology, from cooling a single rack through to entire data centres Individual climate control concepts for rack, suite and room cooling Enhanced security plus superior energy and cost efficiency Optimisation with aisle containment and crosssystem control concepts Energy-efficient cooling with IT chillers Free cooling helps to minimise operating costs Environmentally friendly, thanks to resource savings and reduced CO 2 emissions Planning, assembly, commissioning and servicing all from a single supplier! 8 Sample applications Aisle containment Computer Room Air Conditioner CRAC Raised floor for cold air supply Liquid Cooling Package LCP DX Liquid Cooling Package LCP CW IT chiller with integral free cooling Pipework LCP Hybrid LCP Hybrid 11

12 Enclosures Power Distribution Climate Control IT Infrastructure Software & Services