List of forms CLAP/WGP by subject /68/UE
|
|
- Randall Booth
- 6 years ago
- Views:
Transcription
1 List of forms CLAP/WGP by subject /68/UE Subject Assembly - Assembly including an item of pressure equipment placed on the market before 29 May 2002 in compliance with national pre-ped regulations Assembly - Assembly with an item excluded from the PED Assembly - Assessment of the integration of assemblies CLAP number CLAP version Adopted by CLAP WGP number Adopted by WGP X /03/2016 C-11 15/03/2016 X /01/2016 C-13 08/01/2016 X /03/2016 C-12 15/03/2016 Assembly - Boilers X /01/2016 C-04 08/01/2016 Assembly - Classification of permanent joints X /03/2016 C-15 15/03/2016 Assembly - Derogation of Article X /01/2016 C-05 08/01/2016 Assembly - Effect of the derogation in Article X /01/2016 C-03 08/01/2016 Assembly - Highest category applicable to a pressure equipment X /03/2016 C-16 15/03/2016 Assembly - Hydrostatic pressure test X /01/2016 C-06 08/01/2016 Assembly - Marking of pressure equipment making up an assembly X /03/2016 C-18 15/03/2016 Classification - (non-suspended) solid blocks X /01/2016 B-26 08/01/2016 Classification - Category of a hermetically sealed refrigeration compressor Classification - Classification of a pressuire equipment containing fluids not initially introduced (chemical reaction) Classification - Classification of pressure accessories X /03/2016 B-34 15/03/2016 X /03/2016 B-27 15/03/2016 X /03/2016 B-01 15/03/2016 Classification - condensate trap X /03/2016 B-37 15/03/2016 Classification - Equipments of low volume X /01/2016 A-05 08/01/2016 Classification - Extinguishers and their constitutive parts Classification - Fluid containing a suspension of solid X /01/2016 B-14 08/01/2016 X /01/2016 B-30 08/01/2016 Classification - Generators with coolant X /03/2016 B-06 15/03/2016 Classification - Heat exchanger X /01/2016 B-04 08/01/2016 Classification - Joining of a pressure accessory and a safety accessory. X /03/2016 B-40 15/03/2016 Classification - Maximum allowable temperature, TS X /01/2016 B-05 08/01/2016 Classification - Maximum allowable temperature, TS X /03/2016 B-12 15/03/2016 Classification - Notion of DN X /03/2016 B-02 15/03/2016 Classification - Overheating X /03/2016 B-22 15/03/2016 Classification - Piping classification X /01/2016 B-28 08/01/2016 Classification - Piping with a double envelope X /03/2016 B-35 15/03/2016
2 Classification - Pressure accessories X /01/2016 B-17 08/01/2016 Classification - Pressure gauges X /01/2016 A-06 08/01/2016 Classification - Pressure regulators X /03/2016 B-16 15/03/2016 Classification - Super-heated water X /03/2016 B-03 15/03/2016 Classification - Use Article 3.1 to determine the Table in Annex II Classification - Vessels containing two different fluids. Classification - Vessels containing two phases, one liquid and one gaseous Classification - Vessels for the storage of sanitary hot water X /01/2016 B-13 08/01/2016 X /01/2016 B-09 08/01/2016 X /01/2016 B-10 08/01/2016 X /03/2016 B-08 15/03/2016 Classification of fluids X /03/2015 B-41 11/03/2015 Conformity assessment - Application of a module from a higher category X /03/2016 B-11 15/03/2016 Conformity assessment - Components X /03/2016 D-09 15/03/2016 Conformity assessment - Conformity assessment Equipment for domestic use - CE marking Conformity assessment - Delegation of the proof test X /03/2016 H-19 15/03/2016 X /01/2016 D-13 08/01/2016 Conformity assessment - Design and manufacturing X /01/2016 D-10 08/01/2016 Conformity assessment - Design approval under module G Conformity assessment - Different modules for an assembly Conformity assessment - Different modules for an equipment with sub-contracted part Conformity assessment - Documents to be given for the final inspection Conformity assessment - Evaluation of a pressure equipment making up an assembly Conformity assessment - Expiry date of QA certification Conformity assessment - Notified body in function of the modules X /03/2016 D-01 15/03/2016 X /03/2016 D-06 15/03/2016 X /03/2016 D-03 15/03/2016 X /01/2016 F-02 08/01/2016 X /03/2016 C-07 15/03/2016 X /03/2016 D-15 15/03/2016 X /03/2016 D-04 15/03/2016 Conformity assessment - Operating instructions X /03/2016 D-07 15/03/2016 Conformity assessment - Pressure cookers X /03/2016 B-15 15/03/2016 Conformity assessment - Pressure equipment covered by article 3 3 X /01/2016 B-18 08/01/2016 Conformity assessment - Scope of products X /01/2016 D-12 08/01/2016 Conformity assessment - Taking into account the ISO 9001 certification X /01/2016 D-02 08/01/2016 Conformity assessment - User inspectorate X /03/2016 I-15 15/03/2016 Conformity assessment procedures based on directive 2014/68/EU for assembly including equipment placed on the market according 9G- 23/EC X /06/2015 Definition of fluid X /03/2015 A-24 11/03/2015 Definition of unstable gas X /03/2015 B-21 11/03/2015 Equipement concerned by Dangerous Goods transports regulation X /01/2016 G-29 08/01/2016
3 Equipment covered by the regulations on transport of dangerous goods ESR on design - Components - Experimental design method ESR on design - Conditions of application of an experimental design method without calculation ESR on design - Determination of the maximum allowable pressure X /03/2015 A-54 11/03/2015 X /03/2016 E-07 15/03/2016 X /03/2016 E-01 15/03/2016 X /03/2016 H-07 15/03/2016 ESR on design - Experimental design method X /03/2016 E-05 15/03/2016 ESR on design - Pressure limiting devices X /03/2016 E-02 15/03/2016 ESR on design - Pressure limiting devices - short duration X /03/2016 E-09 15/03/2016 ESR on design - Protective device X /03/2016 E-06 15/03/2016 ESR on design - Self-diagnosis of safety accessories X /01/2016 E-08 08/01/2016 ESR on manufacturing - Accreditation of manufacturer's testing laboratory for NDT or DT ESR on manufacturing - Approach for the approval of permanent joining procedures ESR on manufacturing - Approach for the approval of personnel in charge of permanent joining X /03/2016 F-09 15/03/2016 X /03/2016 F-11 15/03/2016 X /03/2016 F-06 15/03/2016 ESR on manufacturing - Approbation of NDT personnel ESR on manufacturing - Approval of permanent joining procedures and personnel ESR on manufacturing - CE marking of pressure accessories and safety accessories of small dimensions ESR on manufacturing - Essential maximum/minimum allowable limits ESR on manufacturing - Final assessment of pressure equipment ESR on manufacturing - Format for marking the year of manufacture of pressure cookers X /03/2016 F-13 15/03/2016 X /01/2016 F-12 08/01/2016 X /03/2016 H-13 15/03/2016 X /03/2016 H-12 15/03/2016 X /03/2016 H-02 15/03/2016 X /03/2016 H-10 15/03/2016 ESR on manufacturing - Forming procedures X /03/2016 F-03 15/03/2016 ESR on manufacturing - Harmonized standards for permanent joining X /03/2016 F-08 15/03/2016 ESR on manufacturing - Individual serial number X /03/2016 H-09 15/03/2016 ESR on manufacturing - Information required by a Member State ESR on manufacturing - Marking and labelling on a sticker ESR on manufacturing - Marking of bursting disc safety device X /01/2016 I-21 08/01/2016 X177 1 H-17 X /03/2016 D-11 15/03/2016 ESR on manufacturing - Modification X /03/2016 C-19 15/03/2016 ESR on manufacturing - Permanent joints X /03/2016 F-05 15/03/2016 ESR on manufacturing - Piping part of an industrial installation X /01/2016 I-08 08/01/2016 ESR on manufacturing - Pressure test X /01/2016 H-16 08/01/2016 ESR on manufacturing - Qualification of procedures of permanent joints ESR on manufacturing - Replacement after proof test X /03/2016 F-04 15/03/2016 X /03/2016 F-17 15/03/2016
4 ESR on manufacturing - Safety information given to the user ESR on manufacturing - Safety valve and proof test for pressure containment aspect ESR on manufacturing - Temporary device for manufacturing ESR on manufacturing - Third party witness for the whole permanent joining and testing process X /03/2016 H-03 15/03/2016 X /03/2016 H-14 15/03/2016 X /03/2016 F-16 15/03/2016 X /01/2016 F-01 08/01/2016 ESR on manufacturing - Visual examination X /01/2016 F-07 08/01/2016 ESR on manufacturing - Welded tubes X /03/2016 G-25 15/03/2016 ESR on manufacturing - Welding on a pressure bearing component ESR on materials - Approval of a material manufacturer ESR on materials - Bending rupture for materials with low thickness X /01/2016 F-14 08/01/2016 X /03/2016 I-03 15/03/2016 X /03/2016 G-28 15/03/2016 ESR on materials - Bolting parts X /01/2016 G-08 08/01/2016 ESR on materials - Certification of the quality (assurance) systems of material manufacturers X /01/2016 G-02 08/01/2016 ESR on materials - Component parts of pressure equipment ESR on materials - Conformity according a specification X /01/2016 G-19 08/01/2016 X /01/2016 G-30 08/01/2016 ESR on materials - Criteria for steel ductility X /03/2016 G-22 15/03/2016 ESR on materials - Documentation and traceability of welding consumables ESR on materials - European Approval for Materials - Type of material X /01/2016 G-10 08/01/2016 X /03/2016 G-26 15/03/2016 ESR on materials - European Approval of Material X /03/2016 I-04 15/03/2016 ESR on materials - Fine-grained steel X /03/2016 G-14 15/03/2016 ESR on materials - Gasket X /03/2016 G-23 15/03/2016 ESR on materials - Harmonised standard X /03/2016 G-01 15/03/2016 ESR on materials - Impact properties of a steel grade X /01/2016 G-17 08/01/2016 ESR on materials - Inspection document X /01/2016 G-09 08/01/2016 ESR on materials - Inspection documents X /01/2016 G-05 08/01/2016 ESR on materials - Main pressure-bearing part X /03/2016 G-06 15/03/2016 ESR on materials - Material recognised as being safe to use X /03/2016 I-02 15/03/2016 ESR on materials - Particular appraisal for material X /01/2016 I-10 08/01/2016 ESR on materials - Particular appraisal for materials recognized as being safe to use X /03/2016 I-11 15/03/2016 ESR on materials - Particular Material Appraisal X /03/2016 G-21 15/03/2016 ESR on materials - Particular material appraisal X /01/2016 I-13 08/01/2016 ESR on materials - Particular material appraisal by a user inspectorate ESR on materials - Pressure equipment manufactured from plastic, GRP and other non metallic materials ESR on materials - Quantitative values of section 7.5 X /01/2016 I-14 08/01/2016 X /03/2016 G-11 15/03/2016 X /03/2016 G-13 15/03/2016
5 ESR on materials - Requirements on materials X /03/2016 G-18 15/03/2016 ESR on materials - Sound engineering practice X /01/2016 I-12 08/01/2016 ESR on materials - Specific assessment of material manufacturer ESR on materials - Specific assessment of material producers X /03/2016 G-07 15/03/2016 X /01/2016 G-16 08/01/2016 ESR on materials - Traceability X /01/2016 G-04 08/01/2016 ESR on materials - Traceability of 3.1 certificate and associated documentation ESR on materials - Use of materials which comply with harmonized standards ESR on materials - Welding materials and other permanent joining materials X /03/2016 G-27 15/03/2016 X /03/2016 G-15 15/03/2016 X /03/2016 G-12 15/03/2016 ESR particular - an equivalent overall level of safety X /01/2016 H-06 08/01/2016 ESR particular - Boilers for generating steam or superheated water intended for operation without continuous supervision X /01/2016 H-15 08/01/2016 ESR particular - Leakage for pressure equipment X /03/2016 E-03 15/03/2016 ESR particular - Material conforming to the specification Exclusion - Assembly classified as no higher than category I Exclusion - Boilers and pressure vessels classified in category I and installed in a machinery X /01/2016 G-24 08/01/2016 X /03/2016 A-39 15/03/2016 X /03/2016 A-26 15/03/2016 Exclusion - District heating pipelines X /03/2016 A-18 15/03/2016 Exclusion - Equipment in relation to the well-control equipment Exclusion - Gas cylinders to be used for fixed fire extinguishing installations X /03/2016 A-37 15/03/2016 X /03/2016 A-36 15/03/2016 Exclusion - High-voltage X /01/2016 A-51 08/01/2016 Exclusion - Hot blast stoves X /03/2016 B-36 15/03/2016 Exclusion - Interpretation of the exclusion of article X /01/2016 A-11 08/01/2016 Exclusion - Mobile offshore unit X /03/2016 A-27 15/03/2016 Exclusion - Networks for the supply, distribution and discharge of water and associated equipment X /03/2016 A-16 15/03/2016 Exclusion - Pipeline pressure reduction station X /01/2016 A-29 08/01/2016 Exclusion - Pipeline stations X /01/2016 A-28 08/01/2016 Exclusion - Silencers X /03/2016 B-38 15/03/2016 New approach - Additional requirements in national regulations New approach - Application of the sound engineering practice (SEP) New approach - Boilers for generating steam or superheated water intended for operation without continuous supervision X /03/2016 I-24 15/03/2016 X /03/2016 I-17 15/03/2016 X /03/2016 I-20 15/03/2016 New approach - CE declaration of conformity X /03/2016 I-16 15/03/2016 New approach - Declaration of conformity of assemblies X /01/2016 J-08 08/01/2016
6 New approach - Information of the Declaration of Conformity New approach - Information supplied for an item of pressure equipement which falls under sound engineering practice New approach - Inspections under national legislation before putting into service New approach - Language of the EC declaration of conformity New approach - National regulations and inspections periods New approach - Partial use of one or more documents New approach - Replacements, repairs or modifications X /03/2016 J-06 15/03/2016 X /03/2016 I-19 15/03/2016 X /01/2016 I-23 08/01/2016 X /03/2016 I-22 15/03/2016 X /01/2016 I-18 08/01/2016 X /03/2016 I-06 15/03/2016 X /01/2016 A-03 08/01/2016 New approach - Sound engineering practice X /03/2016 I-09 15/03/2016 New approach - Substantial modification X /01/2016 A-04 08/01/2016 New approach - Use of another document than a harmonised standard X /01/2016 I-05 08/01/2016 New approach - Used pressure equipment X /03/2016 J-01 15/03/2016 Pressure and temperature to be marked on bottles for breathing apparatus PS determination of safety accessory like a valve, protecting equipment with different PS X /03/2016 H-18 15/03/2016 X /03/2015 Scope - Transportable pressure receptacle (TPED) X /03/2016 C-20 15/03/2016 Scope - Accumulators for high-voltage electrical equipment Scope - Both the CE marking for the PED and the PI mark for the TPED X /03/2016 A-49 15/03/2016 X /03/2016 A-30 15/03/2016 Scope - Bottles for breathing equipment X /01/2016 A-10 08/01/2016 Scope - Component parts of pressure equipment X /01/2016 A-22 08/01/2016 Scope - Discharge piping of pressure safety accessories X /01/2016 A-42 08/01/2016 Scope - Dryer rolls for paper industry X /03/2016 A-53 15/03/2016 Scope - Electrical pressure cookers X /03/2016 A-52 15/03/2016 Scope - Engine powered fork lift truck X /03/2016 A-41 15/03/2016 Scope - Flame Arresters and flash back arresters X /01/2016 A-48 08/01/2016 Scope - Flare tip at the end of piping X /01/2016 A-50 08/01/2016 Scope - Heat exchanger X /01/2016 A-47 08/01/2016 Scope - Hermetically sealed and semihermetic compressors X /03/2016 A-12 15/03/2016 Scope - Hydraulic and pneumatic transmissions X /01/2016 A-19 08/01/2016 Scope - Measuring or control system X /01/2016 A-20 08/01/2016 Scope - NGV (Natural Gas Vehicles) filling stations X /01/2016 A-31 08/01/2016 Scope - Operational function of a pressure accessory X /03/2016 A-15 15/03/2016 Scope - Piping components X /01/2016 A-09 08/01/2016 Scope - Piping in fire extinguishing systems X /03/2016 A-38 15/03/2016 Scope - Portable extinguishers X /01/2016 A-01 08/01/2016
7 Scope - Portable extinguishers X /03/2016 A-23 15/03/2016 Scope - Pressure accessory X /01/2016 A-08 08/01/2016 Scope - Pressure accessory X /01/2016 A-40 08/01/2016 Scope - Pressure equipment intended for the functioning of vehicles X /03/2016 A-45 15/03/2016 Scope - Pressure equipments installed on vehicles X /03/2016 A-46 15/03/2016 Scope - Propellant gas cartridges for portable extinguishers X /01/2016 A-35 08/01/2016 Scope - PS and explosion X /01/2016 A-56 08/01/2016 Scope - Quick opening closure on a pressure vessel X /03/2016 B-32 15/03/2016 Scope - Receptacles PI marked X /03/2016 A-33 15/03/2016 Scope - Safety accessories X /01/2016 A-43 08/01/2016 Scope - Safety accessories X /03/2016 I-07 15/03/2016 Scope - Sensors used as part of a safety chain X /01/2016 A-25 08/01/2016 Scope - Slurry tanker X /03/2016 A-34 15/03/2016 Scope - Solar panel X /03/2016 B-23 15/03/2016 Scope - Sound engineering practice X /01/2016 I-01 08/01/2016 Scope - Standard pressure equipment X /01/2016 A-17 08/01/2016 Scope - Tank used for transport by road or rail X /01/2016 A-02 08/01/2016 Scope - Transport tanks X /03/2016 A-14 15/03/2016 Scope - Turbine piping X /03/2016 A-55 15/03/2016 Scope - Vacuum insulation of pressure vessels X /03/2016 A-13 15/03/2016 Scope - Vacuum relief valve X /01/2016 B-29 08/01/2016 Scope - Vessels under vaccum conditions X /01/2016 A-57 08/01/2016 Technical reference's change during validity period of a type conformity X /06/2015
Safety valves. Safety valves Safety valves for heating, cooling and solar systems, DN 15 DN 50
Safety valves Safety valves Safety valves for heating, cooling and solar systems, DN 15 DN 50 IMI PNEUMATEX / Accessories and Service / Safety valves Safety valves For the safeguarding of thermostatically
More informationPipeline engineer competency standards list: onshore sector
Pipeline engineer competency standards list: onshore sector ID Competency area/competency Gen Des Cons Ops Level General engineering GE001 Engineering degree in a relevant discipline x Core GE002 Pipeline
More informationAssembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
More informationManufacturer certification in plant, metal and rolling-stock engineering
Manufacturer certification in plant, metal and rolling-stock engineering To ensure you meet the highest quality standards. TÜV SÜD Industrie Service GmbH Be prepared for going global In the course of globalisation,
More informationGEMS SENSORS & CONTROLS SERIES 35XX
GEMS SENSORS & CONTROLS OPERATING & INSTALLATION INSTRUCTIONS SERIES 35XX PLEASE READ CAREFULLY BEFORE INSTALLING Part Number: 560550-0128 Issue: B INTRODUCTION Series 35XX high output pressure transducers
More informationIndustrial Training Zone (ITZ) eseries Courses
Industrial Training Zone (ITZ) eseries Courses LabVolt Series Datasheet Festo Didactic en 07/2018 Table of Contents General Description 2 2 Features & Benefits 2 List of Available Training Systems 2 Equipment
More information2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
More informationDUBAI, 2nd November 2015
Establishing and implementing the certification scheme the development process, the enforcement, registration/certification and monitoring mechanisms, training Component DUBAI, 2nd November 2015 Marco
More informationPACKAGED SYSTEM SOLUTIONS
PACKAGED SYSTEM SOLUTIONS Tundra Process Solutions provides integrated solutions for the industrial marketplace. Tundra s technical and project management teams work with clients to oversee engineering,
More informationNOMINATED REPRESENTATIVE AND SIGNATORIES: RESPONSIBILITIES, QUALIFICATION AND APPROVAL
NOMINATED REPRESENTATIVE AND SIGNATORIES: RESPONSIBILITIES, QUALIFICATION AND APPROVAL Prepared by: SADCAS Approved by: Chief Executive Officer Approval Date: 2009-10-26 Effective Date: 2009-10-26 Table
More informationDANGER indicates that death or severe personal injury will result if proper precautions are not taken.
Trademarks 1 Introduction 2 COMOS Operations Working with the "" plugin 3 Working with the " Diagram" plugin 4 User interface reference 5 Operating Manual 04/2012 A5E03778386-01 Legal information Legal
More informationBrooks Models MT3809G Metal Tube Variable Area Flowmeters HART Handheld DD Installation & Operation Manual
Installation and Operation Manual Supplement Brooks Models MT3809G Metal Tube Variable Area Flowmeters HART Handheld DD Installation & Operation Manual Installation and Operation Manual Supplement Essential
More informationCollections Exam Need to Know Criteria
Equipment Operation & Evaluation Class 1 Class 2 Class 3 Class 4 Operate drives X X X X Operate electronic testing equipment X X X X Operate hand and power tools X X X X Operate heavy equipment X X X X
More informationNational Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5)
NQF Ref 0718 Version 2 Page 1 of 10 National Certificate in Maintenance and Diagnostics in Mechanical Engineering (Level 5) Level 5 Credits 110 This qualification is expiring. The last date to meet the
More informationDOCUMENTATION AND QUALITY ASSURANCE
SPECIFICATION PREFACE SHEET DEPARTMENT: Engineering / Instrumentation SHEET 1 OF 12 AREA: Grundartangi Reduction Plant SPEC No: 00/07/TS012 REV: C2 STANDARD TECHNICAL SPECIFICATION FOR DOCUMENTATION AND
More informationCRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS
CRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS Approved By: Executive: Accreditation: Mpho Phaloane Revised By: RBI STC Working Group Members Date
More informationNATIONAL CERTIFICATE in Lifts and Escalators (Level 4) with strands in Installation, and Servicing Level 4
NZQF NQ Ref 0662 Version 2 Page 1 of 16 NATIONAL CERTIFICATE in Lifts and Escalators (Level 4) with strands in Installation, and Servicing Level 4 Credits 265 This qualification has been reviewed. The
More informationUnofficial English translation offered by EuropElectro, for reference only
No.: CNCA-C10-01: 2014 Implementation Rules for Compulsory Certification of Lighting Electrical Appliances Announced on Jul. 16, 2014 Implemented on Sep. 1, 2014 Certification and Accreditation Administration
More informationPlug and Operate Transformer Technology
Plug and Operate Transformer Technology Deepal Shah PFISTERER deepal.shah@pfisterer.com by and Andre Goessler PFISTERER andre.goessler@pfisterer.com 1 THE POWER CONNECTION We have always worked closely
More informationCUSTOMIZED TEACHER ASSESSMENT BLUEPRINT. Test Code: 5936 Version: 01
CUSTOMIZED TEACHER ASSESSMENT BLUEPRINT ELECTROMECHANICAL ENGINEERING TECHNOLOGY PA Test Code: 5936 Version: 01 Specific competencies and skills tested in this assessment: Technical Documentation and Safety
More informationDUKE UNIVERSITY CONSTRUCTION STANDARDS
1 00 01 10 Table of Contents DIVISION 00: PROCUREMENT AND CONTRACTING REQUIREMENTS 00 01 10 Table of Contents 06.17.2014 00 21 13 Instructions to Bidders 11.08.2013 00 22 13 Supplementary Instructions
More informationCERTIFICATE AND MARK USAGE PROCEDURE
1 / 7 CERTIFICATE AND MARK USAGE PROCEDURE 1. Revision History Rev. No Date of Rev. Definition of Rev. Reason of Rev. 17 20.3.2018 General revision is made. Change of SZUTEST's logo. 16 7.8.2017 Updated
More informationRequirements for the Certification of a Welding Quality Control Co-ordinator
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP- QCC-20-08 Requirements for the Certification of a Welding Quality Control Co-ordinator 2 nd Edition January 2011 Issued under the authority of the
More informationPreparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder
GEP-7004 Rev. L 101251 Ref. ID: 5472 Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder WARNING USER SHOULD
More informationInstallation Guide MODELS 522 / 526. Pressure Transducers TOLL FREE FAX Web Site.
Installation Guide MODELS 522 / 526 Pressure Transducers 1-800-257-3872 TOLL FREE 1-978-264-0292 FAX www.setra.com Web Site 560550-0087 Rev A Setra offers a complete line of products for these industries:
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationQVE3000.0xx QVE3100.0xx. Flow sensor. for liquids in DN10 25 pipes
s 1 598 Flow sensor for liquids in DN10 25 pipes QVE3000.0xx QVE3100.0xx Vortex flow sensor made from robust red brass Output signal: DC 0 10 V or 4 20 ma Flow range: 1.8 150 l/min Used for temperature
More informationMeter FMOGe. Translation of the original. operating manual. Operating manual
Operating manual Meter FMOGe Item-No.: 027175201, 027175301, 027175401, 027175501, 027175601, 027175701, 027175801, 027175901 Translation of the original operating manual Important! Copyright The operating
More informationKeystone OM3 - EPI-2 Local Interface Module Installation and Maintenance Instructions
Index 1 Optional module 3: Local Interface module... 1 2 Installation... 2 3 Description of OM3 Local Interface... 4 4 To locally operate the actuator... 4 5 OM3 wiring diagram... 5 6 Identification...
More informationBVS 17 ATEX E 117 X / IECEx BVS X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363
BVS 17 ATEX E 117 X / IECEx BVS 17.0100X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363 Electromotive control valve with ATEX approval and IECEx approval Elektromotorisches
More informationReport. Certificate M6A SIMATIC S7 Distributed Safety
Report to the Certificate M6A 17 05 67803 014 Safety-Related Programmable Systems SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision 3.1 dated
More informationInspection Management System (IMS) A Welding NDE Management Program for Fabricated Piping Systems
Inspection Management System (IMS) A Welding NDE Management Program for Fabricated Piping Systems General Information Overview IMS is a comprehensive software program for managing welding and non-destructive
More informationPRODUCTION QUALITY ASSURANCE CERTIFICATE. Initial date: 26 May, 2015
DNV GL PRODUCTION QUALITY ASSURANCE CERTIFICATE Certificate No.: 12403-2018-CE-USA-ACCREDIA This certificate consists of 2 pages Initial date: 26 May, 2015 Valid: 14 May, 2018-13 May, 2021 This is to certify
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationBVS 17 ATEX E 117 X / IECEx BVS X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363
BVS 17 ATEX E 117 X / IECEx BVS 17.0100X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363 Electromotive control valve with ATEX approval and IECEx approval Elektromotorisches
More informationUnofficial English translation offered by EuropElectro, for reference only
No.: CNCA C03 01:2014 Implementation Rules for Compulsory Certification of Low-voltage Electrical Apparatus Low-voltage Switchgear Assembly Announced on July.16.2014 Implemented on Sep.1.2014 Certification
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationQuick Start Guide CJB1950ALAAB
Quick Start Guide 1 CJB1950ALAAB www.sar-tick.com This product meets applicable national SAR limits of 2.0W/kg. The specific maximum SAR values can be found in the section of this user guide. When carrying
More informationSiemens Spares COMOS. Operations Inspection. Introduction 1. Working with the "Inspection" plugin 2. Working with the "Inspection diagram" plugin 3
Introduction 1 Working with the "" plugin 2 COMOS Operations Working with the " diagram" plugin 3 Compatibility with P&ID and Isometrics 4 User interface reference 5 Operating Manual 04/2015 A5E32083790-AA
More informationAIR COOLED HEAT PUMPS WITH SCREW COMPRESSORS AND AXIAL FANS
PAH 2802 T K AIR R-407C R-134a Series PAH... T K from 205 to 778 kw - 2 circuits The air cooled heat pumps of PAH.T series are designed for outdoor installation and are particularly suitable for industrial
More informationRHM160. Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications. Features. Applications. Benefits
RHM160 Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications Features Standard Pressure ratings up to 50bar (725 psi) Temperature ratings from -196 to 120 C (-320 to 248 F) Mass flow
More informationNATIONAL CERTIFICATE in 1 of 14
NATIONAL CERTIFICATE in 1 of 14 level of qualification: 4 credit total: 302 Compulsory Elective A Elective B level 1 credits: 9 0-6 0-20 level 2 credits: 69 0-85 0-20 level 3 credits: 32 0-137 0-20 level
More informationKROHNE 12/ GR Installation and Operating Instructions BM 500
KROHNE 12/2003 7.02273.21.00 GR Installation and Operating Instructions BM 500 Subject to change without notice. Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic
More informationEA-7/05 - EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits
Publication Reference EA-7/05 EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits PURPOSE This document has been prepared by a task force under the direction of the European Cooperation
More informationUser Manual for the Antari M-1 Mobile Fog Machine
User Manual for the Antari M-1 Mobile Fog Machine Save and read these instructions Bitte lesen Sie und sichern Sie diese Anweisungen Lisez et Gardez ces instructions M-1 Mobile Fogger Thank you for choosing
More informationCombiTemp TFRN/TFRH. Operating instructions. Temperature sensor. Operating Instructions: EN.
EN/2017-04-03 Design and specifications subject to change without notice English page 1 8 Field of application CombiTemp TFRx is a temperature sensor, based on RTD technology, which is designed and produced
More informationIM /2016 REV01 LACI Production Monitoring Module
IM3063 03/2016 REV01 LACI Production Monitoring Module OPERATOR S MANUAL Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu Declaration of conformity
More informationThe 5400A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel.
Varec 00A Series The 00A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel. Introduction Varec s have been the industry standard for over
More informationDigital Multimeter Safety Tips
Digital Multimeter Safety Tips Most engineers perform measurements with a digital multimeter (DMM) as part of their job. Before you grab the nearest handheld DMM next time, make sure you select the right
More informationDeclaration of Performance (DOP)
Declaration of Performance (DOP) No. 9174 015 DOP 2018-01-08 1. Unique identification code of the product-type: Multi-wall chimney system type DW-ECO-TITAN according to 2. Type, batch or serial number
More informationAnnexure-1 (CC no )
Annexure-1 (CC no. 77627) TECHNICAL SPECIFICATIONS OF EXISTING LIGHTNING ARRESTORS S. No. Description Parameter 1. Type Station class heavy duty zinc oxide gapless 2. Applicable standard IEC-60099-4 /
More informationSpare part catalogue GB 03/2007. Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7
Spare part catalogue 0020037555.03 GB 03/2007 Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7 Content General view of sheet Page 3 04 Burner Page 4 06 Heat exchanger Page 6 07 Casing
More informationRules for Operators. Version 6 / Version 6, 13 May 2011 Page 1/12
Rules for Operators Version 6 / 2011-05-13 Version 6, 13 May 2011 Page 1/12 TABLE OF CONTENTS 1. Introduction... 3 2. Application for certification and FAMI-QS associate membership... 3 3. Assessment of
More informationLevel 4. Credits Purpose
NQF Ref 1407 Version 1 Page 1 of 15 National Certificate in Engineering and Technology (Plastics Engineering) (Level 4) with strands in Injection Moulding, Extrusion, Blow Moulding, Pressure Thermoforming,
More informationDruck DPI 620 advanced modular calibrator
GE Sensing & Inspection Technologies A1.1 DPI 620: Channel 1 (CH1) Druck DPI 620 advanced modular calibrator safety and quick reference guide - K0454 Measure (M) / Source (S) / Power (P) a ±30 V (M) b
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationEnglish. Operating Manual. Conductive point level switch MLR120. Retain for later reference. Companies / brands of GHM
English Operating Manual Conductive point level switch MLR120 Companies / brands of GHM www.ghm-group.de Retain for later reference Table of contents Page 1. Proper use (application areas)... 3 Safety
More informationNOTE ON PERFORMANCE TESTING
NOTE ON PERFORMANCE TESTING Performance Profile Sheet(s) are included in a format that can be easily photocopied for each trainee. This examination is designed to measure competency in the tasks taught
More informationCOMOS. Operations Inspection. Introduction 1. Working with the "Inspection" plugin 2. Working with the "Inspection diagram" plugin 3
Introduction 1 Working with the "" plugin 2 COMOS Operations Working with the " diagram" plugin 3 Compatibility with P&ID and Isometrics 4 User interface reference 5 Operating Manual 05/2016 V 10.2 A5E37093886-AA
More informationMonitoring of Flexible Pipes State of the Art
Monitoring of Flexible Pipes State of the Art Robby O Sullivan, Subsea Regional Technology Officer, APAC SUT Evening Technical Meeting Presentation, Perth, 11 th June 2014 Table of contents 1. Flexible
More informationUser Manual for: Y-Tag PT Product code Version 1.3, March Dyzle
User Manual for: Y-Tag PT 100 1.0 Product code 020 1501 001 Version 1.3, March 2015 2015 Dyzle 2015 Dyzle User Manual for Y-Tag PT 100 1.0, version 1.3, March 2015 1 Foreword This User Manual is intended
More informationSANITRX Rupture Discs
SANITRX Rupture Discs 4-8803 SANITRX RUPTURE DISC The SANITRX* Rupture Disc is a semicircular-scored reverse acting rupture disc designed to provide instantaneous overpressure protection in sanitary environments.
More informationAgreement on High Security Locks
Agreement on High Security Locks Participants: Certification Body Signatory CNPP VdS Schadenverhütung Svensk Brand- och Säkerhetscertifiering AB (SBSC) Associated Testing Laboratories Signatory CNPP VdS
More informationSYLLABUS FOR PLUMBING & SANITARY TRADE
SYLLABUS FOR PLUMBING & SANITARY TRADE Duration at Skills Training Institute (Spread in three months) : 600 Hrs 1. Introduction to ITI : 3 Hrs 2. Introduction to the Trade : 3 Hrs 3. Introduction to Trade
More informationPrecision hand-held pressure indicator Model CPH6400
Calibration technology Precision hand-held pressure indicator Model CPH6400 WIKA data sheet CT 14.01 Applications Calibration service companies and service industry Measurement and control laboratories
More informationOperating Instructions for Level Switch for Liquids. Model: RFS
Operating Instructions for Level Switch for Liquids Model: RFS 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Use in Hazardous
More informationUser Manual for the Antari M-1 Mobile Fog Machine. Congratulations on the purchase of your new ANTARI M-1 Mobile Fog Machine
User Manual for the Antari M-1 Mobile Fog Machine Congratulations on the purchase of your new ANTARI M-1 Mobile Fog Machine Save and read these instructions Bitte lesen Sie und sichern Sie diese Anweisungen
More informationDNV BUSINESS ASSURANCE
DNV BUSINESS ASSURANCE PRODUCTION QUALITY MANAGEMENT CERTIFICATE - EC Certificate No. 6139-2015-CE-USA-ACCREDIA This certificate consists of 3 pages. This is to certify that the quality management system
More informationARTICLE 29 DATA PROTECTION WORKING PARTY
ARTICLE 29 DATA PROTECTION WORKING PARTY 18/EN WP261 Article 29 Working Party Draft Guidelines on the accreditation of certification bodies under Regulation (EU) 2016/679 Adopted on 6 february 2018 1 THE
More informationReport. Certificate Z Rev. 00. SIMATIC Safety System
Report to the Certificate Z10 067803 0020 Rev. 00 Safety-Related Programmable System SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 1.1 dated 2019-02-07 Testing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY CO. LTD. Fl. 3, Building A, Fei Yang Science Park No. 8 Long Chang Road, Block 67 BaoAn District, Guangdong Province,
More informationCable Entry Systems for Potentially Explosive Atmospheres
Cable Entry Systems for Potentially Explosive Atmospheres Directive 94/9/EC (ATEX) KEL-ER KVT 80 ATEX stands for ATmosphères EXplosives and is the short name for the European Directive 94/9/EC, regulating
More informationMINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
MINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians ORION TOWNSHIP BUILDING DEPARTMENT A. FABRICATORS A.1. Fabricators: Not
More informationMesekon Oy Turku ISO 9001:2008, ISO :2005
Certificate No. 2541-10 has granted this certificate as proof that the quality system of Turku complies with the requirements of the standard ISO 9001:2008, ISO 3834-2:2005 Certification covers Contract
More informationWelding Certificate TÜV SÜD
Welding Certificate TÜV SÜD-00064.2013.004 in accordance with EN 1090-1, table B.1, its hereby declared: The manufacturer has produced evidence that he fulfills the requirements of the European standard
More informationWEEE2 Definition and Understanding of the 6 Categories ( )
WEEE2 Definition and Understanding of the 6 Categories (15.08.2018) DEFINITIONS, MISINTERPRETATIONS, DIMENSIONS AND MEASUREMENT OF (W)EEE SEPTEMBER 2017 email: info@ewrn.org web: www.ewrn.org page 1 Content
More informationDOCUMENT NO. CSWIP-PED Requirements for the approval of NDT Personnel CERTIFICATION SCHEME FOR PERSONNEL. 2 nd Edition January 2011
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT NO. CSWIP-PED -2-01 Requirements for the approval of NDT Personnel 2 nd Edition January 2011 Issued under the authority of the Governing Board for Certification
More informationPTB 01 ATEX Example / Beispiel / Exemple. Type Operating Instructions
Device with II 2G EX i approval Geräte mit II 2G EX i Zulassung Appareils avec mode de protection II 2G EX i Example / Beispiel / Exemple Type 6106 Operating Instructions Bedienungsanleitung Manuel d utilisation
More informationTechnical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document
Technical Standards and Safety Authority : Record of Training Policy Document This document is uncontrolled if printed Contents... 1 of Training Providers/Organizations for Record of Training (ROT)...
More informationTechnical Information
Date of last update: 10-08 Ref: Application Engineering Europe PRESSURE EQUIPMENT DIRECTIVE APPLIED TO COPELAND BRAND PRODUCTS The Pressure Equipment Directive (PED) affects compressors, condensing units
More informationMARKET SURVEILLANCE IN SWEDEN
MARKET SURVEILLANCE IN SWEDEN UN-ECE MARS GROUP, Bratislava October 2010 Amina Makboul amina.makboul@swedac.se 1 Overview About Swedac Regulation (EC) no 765/2008 The Swedish Market Surveillance System
More informationMDM 011-Z1 Regen Resistor
MDM 011-Z1 Regen Resistor Date of creation: 10.04.2017 Version date: 10.04.2017 Article number: 09-402-011-Z1-E Publisher: SIGMATEK GmbH & Co KG A-5112 Lamprechtshausen Tel.: 06274/4321 Fax: 06274/4321-18
More informationMODULE B - PROCESS SUBMODULES B1.
Slide 1 MODULE B - PROCESS SUBMODULES B1. Organizational Structure B2. Standards Development: Roles and Responsibilities B3. Conformity Assessment: Roles and Responsibilities B4. Initiating Standards Projects
More informationPEFC Certification System Netherlands - Certification Procedures
PCSN SCHEME DOCUMENT PCSN IV Issue 2 10-03-2017 PEFC Certification System Netherlands - Certification Procedures PEFC Netherlands Kokermolen 11 3994 DG Houten The Netherlands Tel: +31 30 693 0040 Fax:
More informationProvided services catalogue
«Provided Services» Provided services catalogue 1. Condition monitoring services (vibration analysis, ultra-sound analysis) on rotating equipment. 2. On-site dynamic balancing of impellers. 3. High precision
More informationOperating instructions. Switching amplifier DN0210 DN / / 2015
Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5
More informationAre you ready for Electrical Safety Testing?
Are you ready for Electrical Safety Testing? A short guide to preparing for safety itesting of electrical and electronic products Alastair McLaughlin TÜV SÜD Product Service Slide 1 Who am I? Name Alastair
More informationGuidelines 4/2018 on the accreditation of certification bodies under Article 43 of the General Data Protection Regulation (2016/679)
Guidelines 4/2018 on the accreditation of certification bodies under Article 43 of the General Data Protection Regulation (2016/679) Adopted on 4 December 2018 Adopted 1 Contents 1 Introduction... 3 2
More informationSSV Special Compensating Bypass Check Valve
V 18-0 pecial Compensating Bypass Check Valve ew - 0 ANI 0-0 Δp V R V pecial Compensating Bypass Check Valve V 18-0 (type with integrated non-return valve in the bypass) Range of Applications Compared
More informationHEAVY DUTY EQUIPMENT TECHNICIAN
Canadian Council of Directors of Apprenticeship Harmonization Project HEAVY DUTY EQUIPMENT TECHNICIAN Nova Scotia Apprenticeship Agency Industry Consultation February 25, 2015 Overview - Current Heavy
More informationCERTIFICATION THROUGH FIELD OFFICES (BRANCH AND REGIONAL OFFICES) -C.K. MAHESHWARI SCIENTIST G (Certification) 1 BUREAU OF INDIAN STANDARDS
CERTIFICATION THROUGH FIELD OFFICES (BRANCH AND REGIONAL OFFICES) -C.K. MAHESHWARI SCIENTIST G (Certification) 1 BUREAU OF INDIAN STANDARDS CERTIFICATION A MEANS OF PROVIDING ASSURANCE THAT THE PRODUCT
More informationIVDR Breakout. Copyright 2017 BSI. All rights reserved.
IVDR Breakout 1 IVDR Classification and conformity assessment 2 Classification- IVDR 3 Classification of IVDs Re-classification of IVDs will mean 80-90 % will no longer be able to self certify conformity
More informationOverfill Prevention Controller EUS-2
H. Timm Elektronik GmbH Humboldtstr. 29 + D - 21509 Glinde Tel. +49 40 248 35 63-0 + Fax +49 40 248 35 63-39 info@timm-elektronik.de + www-timm-elektronik.de Technical Description Overfill Prevention Controller
More informationReport. Certificate M6A SIMATIC Safety System
Report to the Certificate M6A 067803 0019 Safety-Related Programmable Systems SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 2.1 dated 2018-09-25 Testing Body:
More informationACCREDITATION OF VR REPAIR ORGANIZATIONS
ACCREDITATION OF VR REPAIR ORGANIZATIONS The National Board of Boiler and Pressure Vessel Inspectors 1055 Crupper Avenue Columbus, Ohio 43229 614.888.8320 NB-514, Revision 1 Approved by BOT: August 3,
More informationICE FOG Q TM Low Fog Generator
Low Fog Generator USER GUIDE Revision A/d, May 2017, MDG Fog Generators Ltd MADE IN CANADA FABRIQUÉ AU CANADA Les Générateurs de Brouillard MDG Ltée / MDG Fog Generators Ltd 10301 avenue Pelletier, Montréal,
More informationSubsea Performance Bolt Workshop
Subsea Performance Bolt Workshop API Spec Q1, Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry, 9 th Edition API Spec
More informationDeclaration of performance (DOP)
Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 001 DOP 2013-06-17 Multi-wall chimney system type DW-FU according to 2. Type, batch or serial number or any
More informationLS 6600 Technical Datasheet
Technical Datasheet Switch for level detection and dry-run protection Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE 06/2011-4001367301
More informationACCREDITATION: A BRIEFING FOR GOVERNMENTS AND REGULATORS
ACCREDITATION: A BRIEFING FOR GOVERNMENTS AND REGULATORS Accreditation is continuously gaining recognition as an important technical tool in the delivery of objectives across an increasing range of policy
More information