Options for ABB drives. User s manual FSE-31 pulse encoder interface module
|
|
- Alberta Clark
- 6 years ago
- Views:
Transcription
1 Options for ABB drives User s manual FSE-31 pulse encoder interface module
2 List of related manuals and guides Drive hardware manuals Code (EN) ACS hardware manual 3AUA ACS hardware manual 3AUA ACS single drive module packages 3AUA hardware manual ACS and -34 single drive module packages 3AXD hardware manual ACS880-04XT drive modules (500 to 1200 kw) 3AXD hardware manual ACS (45 to 630 kw) hardware manual 3AUA ACS (560 to 2800 kw) hardware manual 3AUA ACS (160 to 3200 kw) hardware manual 3AXD ACS (160 to 3200 kw) hardware manual 3AXD ACS (132 to 355 kw) hardware manual 3AXD ACS (132 to 355 kw) hardware manual 3AXD ACS hardware manual 3AUA ACS hardware manual 3AUA Drive firmware manuals ACS880 primary control program firmware manual 3AUA Option manuals and guides ACX-AP-x assistant control panels user s manual 3AUA FSE-31 pulse encoder interface module user s 3AXD manual FSO-21 safety functions module user's manual 3AXD Drive PC tool manuals Drive composer start-up and maintenance PC tool 3AUA user's manual Functional safety design tool user s manual 3AXD General safety guides Functional safety; Technical guide No. 10 Safety and functional safety; A general guide ABB Safety information and solutions 3AUA SFC001008B You can find manuals and other product documents in PDF format on the Internet. See section Document library on the Internet on the inside of the back cover. For manuals not available in the Document library, contact your local ABB representative.
3 User s manual FSE-31 pulse encoder interface module Table of contents 1. Safety 4. Mechanical installation 5. Electrical installation 6. Start-up and validation 3AXD Rev B EN EFFECTIVE: ABB Oy All Rights Reserved.
4
5 Table of contents Table of contents 5 1. Safety Contents of this chapter Use of warnings Safety in installation and maintenance Introduction to the manual Contents of this chapter Applicability Compatibility Target audience General safety system considerations Contents Terms and abbreviations Exclusion of liability Hardware description Contents of this chapter Product overview Layout Type designation label Mechanical installation Contents of this chapter Necessary tools and instructions Unpacking and examining the delivery Installing the module Electrical installation Contents of this chapter Warnings Necessary tools and instructions Terminal designations Pin allocation of the encoder interface connector 1 (X31).. 22
6 6 Table of contents Pin allocation of the power supply connector (X81) Wiring Start-up and validation Contents of this chapter Before you start Required tools Setting the parameters Validation Diagnostics Contents of this chapter Faults and warning messages LEDs Safety encoder fault reaction Technical data Contents of this chapter Dimension drawing Isolation areas Encoder interface connector 1 (X31) External power supply (X81) Supported safety encoders Supported encoder cables Safety performance Safety data General data Standards Further information Product and service inquiries Product training Providing feedback on ABB manuals Document library on the Internet
7 Safety 7 1 Safety Contents of this chapter The chapter contains the warning symbols used in this manual and the safety instructions which you must obey when you install or connect an option module to a drive. If you ignore the safety instructions, injury, death or damage can occur. Read this chapter before you start the installation. Use of warnings Warnings tell you about conditions which can cause injury or death, or damage to the equipment. They also tell you how to prevent the danger. The manual uses these warning symbols: Electricity warning tells you about hazards from electricity which can cause injury or death, or damage to the equipment.
8 8 Safety General warning tells you about conditions, other than those caused by electricity, which can cause injury or death, or damage to the equipment. Safety in installation and maintenance These instructions are for all who install or connect an option module to a drive and need to open its front cover or door to do the work. WARNING! Obey these instructions. If you ignore them, injury or death, or damage to the equipment can occur. If you are not a qualified electrician, do not do installation or maintenance work. Disconnect the drive from all possible power sources. After you have disconnected the drive, always wait for 5 minutes to let the intermediate circuit capacitors discharge before you continue. Disconnect all dangerous voltages connected to other connectors or parts in reach. For example, it is possible that 230 V AC is connected from outside to a relay output of the drive. Always use a multimeter to make sure that there are no parts under voltage in reach. The impedance of the multimeter must be at least 1 Mohm. Note: For the maintenance instructions of the FSE-31 module, see FSO-21 safety functions module user's manual (3AXD [English]).
9 Introduction to the manual 9 2 Introduction to the manual Contents of this chapter This chapter introduces this manual. Applicability This manual applies to the FSE-31 pulse encoder interface module, revision F. Compatibility The FSE-31 pulse encoder interface module is compatible with: ACS880 primary control program version 2.21 or later FSO-21 safety functions module, revision B or later Drive composer pro PC tool, version 1.8 or later. The supported safety encoder type is: differential push-pull HTL encoder.
10 10 Introduction to the manual Target audience This manual is intended for people who plan the installation, install, start up, use and service the module. Before you do work on the module, read this manual and the applicable drive manual that contains the information for the product in question. You are expected to know the fundamentals of safety technology, electricity, wiring, electrical components and electrical schematic symbols. The manual is written for readers worldwide. Both SI and imperial units are shown. General safety system considerations The FSE-31 module is a part of a safety system. The system builder is responsible for making sure that the system is fully functional. For general safety considerations and information to be taken into account when building a safety system, see FSO-21 safety functions module user's manual (3AXD [English]). Contents The manual consists of these chapters: Safety contains the safety instructions which you must obey when you install the module. Hardware description gives a short description of the module. Mechanical installation contains a delivery checklist and instructions on installing the module. Electrical installation contains instructions on wiring the module. Start-up and validation contains instructions on starting up the module. Diagnostics shows how to trace faults with the status LED on the module. Technical data contains the technical data of the module.
11 Terms and abbreviations Introduction to the manual 11 Term/abbreviation Description Fail-safe mode The FSO module has activated the drive STO function as a result of an error. To exit this mode and continue normal operation, reboot the FSO module. FEA-03 F-series extension adapter module FSO-21 Safety functions module which supports safety encoders hi-z state In digital outputs, the signal is neither driven to a logical high nor low level. It is floating. HTF Hardware fault tolerance. (EN/IEC 62061) HTL High-threshold logic Safety system Whole safety system including for example human interface, safety encoder, FSE-31 module, FSO module, drive and sensors. SIL Safety integrity level (levels are: 1, 2, 3, and 4). Corresponds to PL. (EN 62061) SILCL Maximum SIL that can be claimed for a safety function or subsystem. (EN/IEC 62061) STO Safe torque off PL Performance level (levels are: a, b, c, d and e). Corresponds to SIL. (EN ISO )
12 12 Introduction to the manual Exclusion of liability ABB is not responsible for the implementation, verification and validation of the overall safety system. It is the responsibility of the system integrator (or other party) who is responsible for the overall system and system safety. The system integrator (or other responsible party) must make sure that the entire implementation complies with all relevant standards, directives and local electrical code, and that the system is tested, verified and validated correctly.
13 Hardware description 13 3 Hardware description Contents of this chapter This chapter gives a short description of the module. Product overview The FSE-31 pulse encoder interface module is used in safety systems together with the FSO-21 safety functions module. The safety pulse encoder delivers pulses to the FSE-31 module which delivers safe speed, direction and position information to the FSO-21 module. The FSE-31 module also monitors the operation of the safety encoder and indicates faults to the FSO-21 module. The FSE-31 module has two encoder interfaces. ACS880 primary control program version 2.21 supports one encoder interface (connector X31). It can function as an HTL encoder interface. The FSE-31 module has an external power supply interface, which supplies power to the FSE-31 module and the safety pulse encoder.
14 14 Hardware description Layout X31 Pin no
15 Hardware description 15 Item Description 1 Retaining clips 2 Lock 3 Mounting screw 4 Encoder interface connector X31 5 Encoder interface connector X32 (reserved for future use) 6 External power supply X81 7 Diagnostic LEDs Type designation label The type designation label is attached on the top of the FSE module. An example label and description of the label contents are shown below Item Description 1 Type 2 Serial number of format RYWWSSSSWS, where R component revision; A, B, Y: Last digit of the manufacturing year: 4, 5, for 2014, 2015 WW: Manufacturing week: 01, 02, for week 1, week 2, SSSS: Integer starting every week from 0001 WS: Manufacturing location 3 ABB MRP code of the FSE module 4 Combined ABB MRP code, component revision, serial number and manufacturing location 5 RoHS mark
16 16 Hardware description
17 Mechanical installation 17 4 Mechanical installation Contents of this chapter This chapter contains a delivery checklist and instructions on installing the module. Necessary tools and instructions Torx screwdriver (T10) For a complete list of tools, see the applicable drive hardware manual. Unpacking and examining the delivery 1. Open the option package. 2. Make sure that the package contains: FSE-31 pulse encoder interface module this manual (not included if the module is installed into the drive at the factory). 3. Make sure that there are no signs of damage.
18 18 Mechanical installation Installing the module WARNING! Obey the safety instructions. See chapter Safety. If you ignore the safety instructions, injury or death can occur. 1. Pull out the lock. 2. Put the module carefully into its position on the drive until the retaining clips lock it into position. 3. Push in the lock. 4. Tighten the screw. Note: The screw tightens the connections and grounds the module. It is necessary for fulfilling the EMC requirements and for proper operation of the module. WARNING! Do not tighten the screw tighter than 0.8 N m. Too big a torque value breaks the thread. See the applicable drive manual for further instructions on how to install the module to the drive. Note: Do not install the FSE-31 module on an FEA-03 F-series extension adapter.
19 Mechanical installation
20 20 Mechanical installation
21 Electrical installation 21 5 Electrical installation Contents of this chapter This chapter contains instructions on wiring the module. Warnings WARNING! Obey the safety instructions. See chapter Safety. If you ignore the safety instructions, injury or death can occur. If you are not a qualified electrician, do not do electrical work. Necessary tools and instructions Slot-head screwdriver Torx screwdriver Cabling tools For a complete list of tools, see the applicable drive hardware manual.
22 22 Electrical installation Terminal designations Pin allocation of the encoder interface connector 1 (X31) X31 HTL No. Name Specification Description 1 VCC_ENC_1 15 V DC Encoder channel 1 power supply output 2 COM_ENC_1 0 V Encoder channel 1 supply/signal common (ground) 3 A+_ V DC Encoder channel 1 signal A+ input 4 A-_ V DC Encoder channel 1 signal A- input 5 B+_ V DC Encoder channel 1 signal B+ input 6 B-_ V DC Encoder channel 1 signal B- input 7 Z+_ V DC Encoder channel 1 signal Z+ input 8 Z-_ V DC Encoder channel 1 signal Z- input 9 SHIELD_1 N/A Encoder channel 1 cable shield Pin allocation of the power supply connector (X81) X81 Description 1/+ Supply voltage 2/- Supply ground
23 Electrical installation 23 Wiring Connect the external control cables to the applicable module terminals. Do not route signal cables parallel to power cables. You have to use the same power supply for the FSE-31 and FSO-21 modules. If an internal safety encoder failure occurs, the safety encoder goes into the Safe state. To recover from these situations, you have to be able to reboot the safety encoder (for example, by switching the power off and on). We recommend that you use the same power supply for the safety encoder and the FSE-31 and FSO-21 modules. FSE-31 Encoder 1 X31 1 VCC_ENC VCC 0V COM_ENC A+ 1 4 A- 2 5 B+ 2 6 B- 0 7 Z Z- SHLD Note: This figure applies to the FSE-31 module revision F or later. Make sure you connect the safety encoder according to this figure. You can see the revision of the module in the type designation label (see page 15).
24 24 Electrical installation
25 Start-up and validation 25 6 Start-up and validation Contents of this chapter This chapter refers to the instructions for starting up the module. Before you start Make sure that you have completed the drive start-up procedure. Required tools Drive composer pro PC tool, version 1.8 or later Setting the parameters You start up the FSE-31 module through the drive and FSO-21 module parameters. See the start-up instructions in FSO-21 safety functions module user's manual (3AXD [English]). Validation See the validation instructions in FSO-21 safety functions module user's manual (3AXD [English]).
26 26 Start-up and validation
27 Diagnostics 27 7 Diagnostics Contents of this chapter This chapter shows how to trace faults with the status LEDs on the module. Faults and warning messages For the fault and warning messages concerning the module, see the drive firmware manual. LEDs The FSE-31 module has three diagnostic LEDs. Name Color Description PWR Green The module is powered up. ENC STATUS Green The encoder is in normal operation. Off An encoder fault is active. STATUS Green The module is in normal operation. Green flashing The module is initializing. Off A module fault is active.
28 28 Diagnostics Safety encoder fault reaction The FSE-31 module indicates the internal faults of the safety encoder as cabling faults. The fault reaction depends on the FSO parameter settings. For more information, see FSO-21 extended safety functions module user's manual (3AXD [English]).
29 Technical data 29 8 Technical data Contents of this chapter This chapter contains the technical data of the module.
30 30 Technical data Dimension drawing The dimensions are in millimeters and [inches].
31 Technical data 31 Isolation areas The following figure describes the different isolation areas of the module. The shield pins of connectors X31 and X32 are connected to chassis. The mounting screw connects the chassis to ground. Connection to the drive X1101 A B X32 X31 Encoder interface 2 (not in use) Encoder interface 1 X81 External power supply CHASSIS Mounting screw Encoder interface connector 1 (X31) Connector pitch: 5.0 mm, wire size: max. 2.5 mm 2 External power supply (X81) Connector pitch: 3.5 mm, wire size: max. 1.5 mm 2 24 V DC Maximum power consumption: 500 ma
32 32 Technical data Supported safety encoders Differential push-pull HTL encoders Supply voltage: 15 V DC Maximum pulse frequency: 200 khz The safety encoder must indicate its internal faults either by setting its outputs to the hi-z state ( floating the outputs) or setting its complement outputs to identical states. Note: The FSE-31 module does not support the use of a separate error indication signal from the safety encoder. Supported encoder cables Draka JAMAK 4 x (2 + 1) x 0.5 mm 2 or similar Maximum cable length: 300 m (980 ft) Safety performance When the FSE-31 module and a safety encoder are used in a safety function with a SIL/PL requirement, the safety encoder must be SIL/PL classified. The user must make sure that the SIL/PL capability of the safety encoder and the complete safety function meets the required SIL/PL. Examples of the SIL/PL capability of the safe speed measurement: Safety performance with an HTL encoder classified to SIL 3, SILCL 3 (HFT=1), PL e (Category 3) and the FSE-31 and FSO-21 modules: SIL 3, SILCL 3 (HFT=1), PL e (Category 3) Safety performance with a single HTL encoder classified to SIL 2, SILCL 2 (HFT=0), PL d (Category 2) and the FSE-31 and FSO-21 modules: SIL 2, SILCL 2 (HFT=1), PL d (Category 2)
33 Technical data 33 Safety data The safety data of the FSE-31 module is given in FSO-21 safety functions module user s manual (3AXD [English]). General data Degree of protection: IP20 Ambient conditions: See the FSO-21 module user s manual. Package: Cardboard. Plastic wrapping: Antistatic air bubble sheet (PE). Printed circuit board conformal coated Standards The FSE-31 and FSO-21 module combination complies with: IEC ed. 2.0: 2010 EN/IEC 62061: A1:2013 EN ISO : AC:2009 EN/IEC :2007 All components are RoHS compliant.
34 34 Technical data
35 Further information Product and service inquiries Address any inquiries about the product to your local ABB representative, quoting the type designation and serial number of the unit in question. A listing of ABB sales, support and service contacts can be found by navigating to Product training For information on ABB product training, navigate to new.abb.com/service/training. Providing feedback on ABB manuals Your comments on our manuals are welcome. Navigate to new.abb.com/drives/manuals-feedback-form. Document library on the Internet You can find manuals and other product documents in PDF format on the Internet at
36 Contact us 3AXD Rev B (EN)
Options for ABB drives, converters and inverters. User s manual FDIO-01 digital I/O extension module
Options for ABB drives, converters and inverters User s manual FDIO-01 digital I/O extension module List of related manuals Drive manuals and guides ACS880-01 manuals ACS880-04 manuals ACS880-07 manuals
More informationOptions for ABB drives. User s manual FPTC-01 thermistor protection module (option +L536) for ACS880 drives
Options for ABB drives User s manual FPTC-01 thermistor protection module (option +L536) for ACS880 drives List of related manuals Drive hardware manuals Code (EN) ACS880-01 hardware manual 3AUA0000078093
More informationOptions for ABB drives. User s manual Emergency stop, stop category 0 (option +Q951) for ACS880-07/17/37 drives
Options for ABB drives User s manual Emergency stop, stop category 0 (option +Q951) for ACS880-07/17/37 drives List of related manuals Drive hardware manuals and guides ACS880-07 drives (560 to 2800 kw)
More informationABB industrial drives. EMC filter and ground-to-phase varistor disconnecting instructions ACS880 frames R1 to R11
ABB industrial drives EMC filter and ground-to-phase varistor disconnecting instructions ACS880 frames R1 to R11 List of related manuals hardware manuals and guides Code (English) EMC filter and ground-to-phase
More informationOptions for ABB drives, converters and inverters. User s manual FEA-03 F-series extension adapter
Options for ABB drives, converters and inverters User s manual FEA-03 F-series extension adapter List of related manuals Option manuals and guides FEA-03 F-series extension adapter user s manual FDCO-01/02
More informationOptions for ABB drives. User s manual FPTC-02 ATEX-certified thermistor protection module, Ex II (2) GD (option +L537+Q971) for ACS880 drives
Options for ABB drives User s manual FPTC-02 ATEX-certified thermistor protection module, Ex II (2) GD (option +L537+Q971) for ACS880 drives List of related manuals Drive hardware manuals Code (EN) ACS880-01
More informationOptions for ABB drives. User s manual Prevention of unexpected start-up (option +Q957) for ACS880-07/17/37 drives
Options for ABB drives User s manual Prevention of unexpected start-up (option +Q957) for ACS880-07/17/37 drives List of related manuals Drive hardware manuals and guides ACS880-07 drives (560 to 2800
More informationOptions for ABB drives. User s manual FPTC-02 ATEX-certified thermistor protection module, Ex II (2) GD (option +L537+Q971) for ACS880 drives
Options for ABB drives User s manual FPTC-02 ATEX-certified thermistor protection module, Ex II (2) GD (option +L537+Q971) for ACS880 drives List of related manuals Drive hardware manuals Code (EN) ACS880-01
More informationOPTIONS FOR ABB DRIVES CPTC-02 ATEX-certified thermistor protection module, Ex II (2) GD (+L537+Q971) User s manual
OPTIONS FOR ABB DRIVES CPTC-02 ATEX-certified thermistor protection module, Ex II (2) GD (+L537+Q971) User s manual List of related manuals Drive hardware manuals and guides Code (English) Drive/converter/inverter
More informationOptions for ABB drives. User s manual Emergency stop, stop category 1 (option +Q964) for ACS880-07/17/37 drives
Options for ABB drives User s manual Emergency stop, stop category 1 (option +Q964) for ACS880-07/17/37 drives List of related manuals Drive hardware manuals and guides ACS880-07 drives (560 to 2800 kw)
More informationOptions for ABB drives. User s manual Prevention of unexpected start-up (option +Q950) for ACS880-07/17/37 drives
Options for ABB drives User s manual Prevention of unexpected start-up (option +Q950) for ACS880-07/17/37 drives List of related manuals Drive hardware manuals and guides ACS880-07 drives (560 to 2800
More informationUser s Manual Pulse Encoder Interface Module OTAC-01
Drive IT Low Voltage AC Drives User s Manual Pulse Encoder Interface Module OTAC-01 2 Safety WARNING! All electrical installation and maintenance work on the drive should be carried out by qualified electricians
More informationABB industrial drives. Safety instructions ACS880 multidrive cabinets and modules
ABB industrial drives Safety instructions ACS880 multidrive cabinets and modules Safety instructions ACS880 multidrive cabinets and modules Table of contents 2. Safety instructions 2017 ABB Oy. All Rights
More informationABB low voltage drives. Supplement External control unit (+P906) for ACH580-04, ACQ and ACS drives
ABB low voltage drives Supplement External control unit (+P906) for ACH580-04, ACQ580-04 and ACS580-04 drives List of related manuals Drive hardware manuals and guides External control unit (+P906) for
More informationEnglish Quick start-up guide ACH580 drives with HVAC control program
English........ 3 Quick start-up guide ACH580 ABB drives for HVAC drives with HVAC control program Quick start-up guide ACH580 drives with HVAC control program English... 3 2017 ABB Oy. All Rights Reserved.
More informationABB Drives. User s Manual Modbus Adapter Module FMBA-01
ABB Drives User s Manual Modbus Adapter Module FMBA-01 Modbus Adapter Module FMBA-01 User s Manual 3AFE68586704 REV A EN EFFECTIVE: 27.06.2005 2005 ABB Oy. All Rights Reserved. 5 Safety instructions
More informationABB Drives. User s Manual. Analogue I/O Extension Module RAIO-01
ABB Drives User s Manual Analogue I/O Extension Module RAIO-01 Analogue I/O Extension Module RAIO-01 User s Manual 3AFE 64484567 REV A EN EFFECTIVE: 1.2.2002 2002 ABB Oy. All Rights Reserved. Safety
More informationABB Drives. User s Manual. Digital I/O Extension Module RDIO-01
ABB Drives User s Manual Digital I/O Extension Module RDIO-01 Digital I/O Extension Module RDIO-01 User s Manual 3AFE 64485733 REV B EN EFFECTIVE: 10.2.2003 2003 ABB Oy. All Rights Reserved. Safety Instructions
More informationABB Drives. User s Manual. Modbus Adapter Module RMBA-01
ABB Drives User s Manual Modbus Adapter Module RMBA-01 Modbus Adapter Module RMBA-01 User s Manual 3AFE 64498851 REV A EN EFFECTIVE: 1.3.2002 2002 ABB Oy. All Rights Reserved. Safety instructions Overview
More informationOPTION FOR ABB DRIVES, CONVERTERS AND INVERTERS FSCA-01 RS-485 adapter module User s manual
OPTION FOR ABB DRIVES, CONVERTERS AND INVERTERS FSCA-01 RS-485 adapter module User s manual List of related manuals See section Related manuals on page 13. You can find manuals and other product documents
More informationABB Drives. User s Manual Pulse Encoder Interface Module MTAC-01
ABB Drives User s Manual Pulse Encoder Interface Module MTAC-01 Pulse Encoder Interface Module MTAC-01 User s Manual 3AFE68591091 REV B EN EFFECTIVE: 04.04.2006 2006 ABB Oy. All Rights Reserved. 5 Safety
More information115/230 VAC Digital Input Module OHDI-01
Drive IT Low Voltage AC Drives User s Manual 115/230 VAC Digital Input Module OHDI-01 OHD4 2 115/230 VAC Digital Input Module OHDI-01 Safety WARNING! All electrical installation and maintenance work on
More informationWelcome to the overview of ACS880 functional safety, FSO-11 Safety functions module.
Welcome to the overview of ACS880 functional safety, FSO-11 Safety functions module. 1 The e-learning sessions about FSO-11 safety functions module contain the following topics. A general overview More
More informationChecking the compatibility with IT (ungrounded) and corner-grounded delta systems. EMC filter +E200 (690 V drives and drive modules)
Update notice Update notice 1 The notice concerns the ACS880-04XT hardware manuals listed below. Contents of the notice: Checking the compatibility of the drive with IT (ungrounded) and cornergrounded
More informationFSO Webnair FSO Safety Functions Module. ABB Group February 11, 2015 Slide 1
FSO Webnair FSO Safety Functions Module February 11, 2015 Slide 1 Competence Requirements for ABB Commissioner / Service Engineer of ACS880 Drives with FSO The integrated Safety Function Module (FSO; option
More informationABB wind turbine converters. Supplement ACS slide-out frame (+P919)
ABB wind turbine converters Supplement ACS800-67 slide-out frame (+P919) List of related manuals ACS800-67 manuals ACS800-67 wind turbine converters for asynchronous slip ring generators hardware manual
More informationOPTION FOR ABB DRIVES, CONVERTERS AND INVERTERS FEPL-02 Ethernet POWERLINK adapter module User s manual
OPTION FOR ABB DRIVES, CONVERTERS AND INVERTERS FEPL-02 Ethernet POWERLINK adapter module User s manual List of related manuals See section Related manuals on page 15. You can find manuals and other product
More informationABB DRIVES UK gland plate (+H358) ACS880-11, ACS880-31, ACH580-31, ACQ Installation guide
ABB DRIVES UK gland plate (+H358) ACS880-11, ACS880-31, ACH580-31, ACQ580-31 Installation guide Installation guide UK gland plate (+H358) ACS880-11, ACS880-31, ACH580-31, ACQ580-31 Table of contents 2018
More informationOPTION FOR ABB DRIVES, CONVERTERS AND INVERTERS FDNA-01 DeviceNet adapter module User s manual
OPTION FOR ABB DRIVES, CONVERTERS AND INVERTERS FDNA-01 DeviceNet adapter module User s manual List of related manuals See section Related manuals on page 15. You can find manuals and other product documents
More informationWelcome to the safety functions configuration training module for ACS880 Cabinet-built industrial drives.
Welcome to the safety functions configuration training module for ACS880 Cabinet-built industrial drives. 1 After viewing this presentation you will be able to describe: The functionality of cabinet-built
More informationABB industrial drives. Supplement ACS880 distributed I/O bus
ABB industrial drives Supplement ACS880 distributed I/O bus List of related manuals General manuals Safety instructions for ACS880 multidrive cabinets and modules Safety instructions for ACS880 liquid-cooled
More information- Alii -,..., ~~~~~~~~'-~" ..., ,..- ))) --t ..., )(1. User s manual FEPL-02 Ethernet POWERLINK adapter module. IIIIIJ!ll"
Options for ABB drives, converters and inverters User s manual FEPL-02 Ethernet POWERLINK adapter module,..- ))) --t - Alii - -,...,..., IIIIIJ!ll"...,,, FEPL ~ 02,.., " ETHERNET powerljnk ADApTER _,,""
More informationOperating instructions AC010S Compact AS-i E-STOP safety module
Operating instructions AC010S Compact AS-i E-STOP safety module Sachnr. 7390636_/00 05/2007 Contents Safety instructions............................. 3 Installation / Setup............................
More informationVLT Line Filter MCC 107 EMC Filter Series VLT Midi Drive FC 280 (K1 K3)
These instructions provide technical and installation information for the MCC 107 EMC filter series. Only Danfoss qualified personnel is allowed to install this equipment. The personnel must be familiar
More informationOptions for ABB drives, converters and inverters. User s manual FECA-01 EtherCAT adapter module
Options for ABB drives, converters and inverters User s manual FECA-01 EtherCAT adapter module List of related manuals Drive manuals and guides Code (EN/Multilingual) ACS355 drives (0.37 22 kw, 0.5 30
More informationOperating instructions. Switching amplifier DN0210 DN / / 2015
Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5
More informationABB Drives. User s Manual DeviceNet Adapter Module RDNA-01
ABB Drives User s Manual DeviceNet Adapter Module RDNA-01 DeviceNet Adapter Module RDNA-01 User s Manual 3AFE64504223 Rev D EN EFFECTIVE: 16.07.2007 2007 ABB Oy. All Rights Reserved. 5 Safety instructions
More informationOriginal operating instructions Fail-safe inductive sensor GI711S / / 2010
Original operating instructions Fail-safe inductive sensor GI7S 704583 / 0 06 / 200 Contents Preliminary note 3. Explanation of symbols 3 2 Safety instructions 4 2. Safety-related requirements regarding
More informationXPSMCMx Fieldbus Expansion Modules Instruction Sheet (Original Language)
XPSMCMx Fieldbus Expansion Modules EAV8283001 12/2014 XPSMCMx Fieldbus Expansion Modules Instruction Sheet (Original Language) 12/2014 EAV8283001.00 www.schneider-electric.com The information provided
More informationABB industrial drives. Supplement ACS880 override control program (option +N5450)
ABB industrial drives Supplement ACS880 override control program (option +N5450) List of related manuals Drive firmware manuals ACS880 primary control program firmware manual ACS880 drives with primary
More informationUser s Manual. ACS550-PD Stock 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual
User s Manual ACS550-PD Stock 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual 2 ACS550-PD 3R Irrigation Packaged Drive ACS550 Drive Manuals GENERAL MANUALS ACS550-U1 User s Manual (1
More informationRhino Buffer Module PSM24-BFM600S. Operating Instructions
Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts
More informationREDUNDANCY MODULE TSP-REM360 AND TSP-REM600
REDUNDANCY MODULE TSP-REM360 AND TSP-REM600 Operating Instructions Seite 1 Dimensions drawings: TSP-REM360 Weight: 0.882lb Gewicht: 0.40kg Seite 2 Dimensions drawings: TSP-REM600 Bottom view Top view Side
More informationOriginal operating instructions Fail-safe inductive sensor GF711S / / 2013
Original operating instructions Fail-safe inductive sensor GF7S 8528 / 5 / 23 Contents Preliminary note...3. Explanation of symbols...3 2 Safety instructions...4 2. Safety-related requirements regarding
More information270 MHz Control Modules
2400 / 2420 / 2450 Performance Drives A D D E N D U M 270 MHz Control Modules Notices 2000.40(A2) 01 11/08 Copyright 2002-2008 by Unico, Incorporated. All rights reserved. No part of this publication may
More informationPhone: Fax: Web: -
In automated systems, sensors and actuators must interact with one another functionally and safely. The necessary coordination is performed by the programmable Safety Controller. The controller monitors
More informationPowerFlex DC Drive Frame B Pulse Transformer Circuit Board
Installation Instructions PowerFlex DC Drive Frame B Pulse Transformer Circuit Board ATTENTION: Only qualified personnel familiar with DC drives and associated machinery should plan or implement the installation,
More informationUser s Manual. ACS550-PD 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual
User s Manual ACS550-PD 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual 2 ACS550-PD 3R Irrigation Packaged Drive ACS550 Drive Manuals GENERAL MANUALS ACS550-U1 User s Manual (1 200 HP)
More informationOriginal operating instructions Safety relay with relay outputs with and without delay G1502S / / 2016
Original operating instructions Safety relay with relay outputs with and without delay UK G50S 803638 / 00 0 / 06 Contents Preliminary note...4. Symbols used...4 Safety instructions...5 3 Items supplied...6
More informationWelcome to the Safety functions training module for ACS880 cabinet-built industrial drives.
Welcome to the Safety functions training module for ACS880 cabinet-built industrial drives. 1 In this presentation we will discuss safety options for ACS880 cabinet-built drives, FSO-12 safety functions
More informationLXM28AU07M3X motion servo drive - Lexium 28 - single and three phase V W
Characteristics motion servo drive - Lexium 28 - single and three phase 200...230 V - 750 W Main Range of product Lexium 28 Product or component type Device short name Format of the drive Line current
More informationOriginal operating instructions Safety relay with relay outputs G1501S / / 2016
Original operating instructions Safety relay with relay outputs G50S UK 8023637 / 00 02 / 206 Contents Preliminary note...4. Symbols used...4 2 Safety instructions...5 3 Items supplied...6 4 Functions
More informationOperating instructions. Speed monitor D / / 2014
Operating instructions Speed monitor D200 80005257 / 00 05 / 2014 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5 2.2 Target group...5
More informationTSXPAY262 Preventa safety module - 24 V DC - standard format - < 5 W
Characteristics Preventa safety module - 24 V DC - standard format - < 5 W Main Range of product Product or component type Complementary [Us] rated supply voltage Supply voltage limits Activation threshold
More informationResolver to Digital Expansion Board
Resolver to Digital Expansion Board Catalog No. EXB009A01 Installation and Operating Manual 6/98 MN1313 Table of Contents Section 1 General Information............................. 1-1 Introduction....................................
More informationOperating instructions AS-i SmartLine module AC3200 AC /00 06/2016
Operating instructions AS-i SmartLine module AC3200 AC3201 80237876/00 06/2016 Contents 1 Preliminary note...3 1.1 Symbols used...3 1.2 Warnings used...3 2 Safety instructions...3 2.1 General...3 2.2 Target
More informationEnglish. Operating Manual. Conductive point level switch MLR120. Retain for later reference. Companies / brands of GHM
English Operating Manual Conductive point level switch MLR120 Companies / brands of GHM www.ghm-group.de Retain for later reference Table of contents Page 1. Proper use (application areas)... 3 Safety
More informationPowerFlex DC Drive - Frame A Switching Power Supply Circuit Board
Installation Instructions PowerFlex DC Drive - Frame A Switching Power Supply Circuit Board ATTENTION: Only qualified personnel familiar with DC drives and associated machinery should plan or implement
More informationOriginal operating instructions Fail-safe inductive sensor GI712S
Original operating instructions Fail-safe inductive sensor GI712S 80236527 / 00 12 / 2016 Contents 1 Preliminary note...3 1.1 Symbols used...3 1.2 Warning signs used...3 2 Safety instructions...4 2.1 Safety-related
More informationGV3000/SE Operator Interface Module (OIM) User Guide Version 2.0 M/N 2RK3000
GV3000/SE Operator Interface Module (OIM) User Guide Version 2.0 M/N 2RK3000 Instruction Manual D2-3342-2 The information in this manual is subject to change without notice. Throughout this manual, the
More informationRhino Redundancy Module PSM24-REM360S. Operating Instructions
Rhino Redundancy Module PSM4-REM360S Operating Instructions RHINO REDUNDANCY MODULE PSM4-REM360S Description With this module and two power supplies of the PSM series (78, 90, 56, 80 and 360 watt models),
More informationAS-i Safety Relay Output Module with Diagnostic Slave
AS-i Safety Relay Output Module with Diagnostic Slave User Manual...supports the requirements for AS-i Safety up to SIL3 Revision date: 2016-03-9 Subject to modifications without notice. Generally, this
More information170 ADM to 60 VDC Module Base / 170 ADO Pt. Relay Out Module Base. Version 1.0
170 ADM 850 10 10 to 60 VDC Module Base / 170 ADO 830 30 6 Pt. Relay Out Module Base Version 1.0 31005197 00 Safety Information NOTICE Read these instructions carefully, and look at the equipment to become
More informationHITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions
HITACHI EH-150 series PLC Resistance Temperature Detective input module Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction
More informationOptions for ABB drives, converters and inverters. User s manual FECA-01 EtherCAT adapter module
Options for ABB drives, converters and inverters User s manual FECA-01 EtherCAT adapter module List of related manuals See section Related manuals on page 16. EtherCAT is registered trademark and patented
More informationCONFIGURABLE SAFETY RELAYS
CONFIGURABLE SAFETY RELAYS The cycle control function of the configurable MSI allows efficient semi-automatic processes Special features Single or double-cycle operation with 0 s / 0 min time monitoring
More informationOriginal operating instructions Fail-safe inductive sensor GG711S
Original operating instructions Fail-safe inductive sensor GG7S 8236522 / 2 / 26 Contents Preliminary note...3. Symbols used...3.2 Warning signs used...3 2 Safety instructions...4 2. Safety-related requirements
More informationDrive Technology \ Drive Automation \ System Integration \ Services. Manual. Electronic Motor DRC Functional Safety
Drive Technology \ Drive Automation \ System Integration \ Services Manual Electronic Motor DRC Functional Safety Edition 02/2012 19376812 / EN SEW-EURODRIVE Driving the world Contents Contents 1 General
More informationPhase Loss Protection Upgrade. Phase Loss Protection Upgrade. In this bulletin:
Phase Loss Protection Upgrade In this bulletin: Introduction... 2 Purpose... 2 General... 2 Applicability... 2 HD3070 Phase Loss Protection Upgrade Kit Parts... 2 Preparation... 4 Install the Phase Loss
More informationABB Micro drives. User s manual ACS250 drives ( hp) (600V Variants)
ABB Micro drives User s manual ACS250 drives (0.5 20 hp) (600V Variants) List of related manuals Option manuals and guides ACS250 user s manual for 115-480V variants Code (English) 3AUA0000137830 You can
More informationController CMXH. Description STO. Safe Torque Off (STO) [ ]
Controller CMXH Description STO Safe Torque Off (STO) 8062612 1603 [8062614] CMXH Translation of the original instructions CMXH-STO-EN Identification of hazards and instructions on how to prevent them:
More informationDrive Technology \ Drive Automation \ System Integration \ Services. Manual. Control Cabinet Inverter MOVITRAC B Functional Safety
Drive Technology \ Drive Automation \ System Integration \ Services Manual Control Cabinet Inverter MOVITRAC B Functional Safety Edition 05/2009 16811216 / EN SEW-EURODRIVE Driving the world Content Content
More informationOriginal operating instructions Photoelectric safety sensors (safety light grid) with active / passive system OY90xS
Original operating instructions Photoelectric safety sensors (safety light grid) with active / passive system OY90xS UK 704818 / 01 10 / 2016 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning
More informationSAFETY RELAY YRB-4EML-31S MAIN FEATURES
SAFETY RELAY TYPE 4 SAFETY PROTECTION DEVICE FOR SAFETY LIGHT CURTAINS/BARRIERS MAIN FEATURES For safety light curtains and access control barriers, emergency stop, door switch Safety Integrity Level (SIL)
More informationOperating instructions for AX5801. TwinSAFE drive option card for the AX5000 servo drive. Version: Date:
Operating instructions for AX5801 TwinSAFE drive option card for the AX5000 servo drive Version: 1.2.0 Date: 2016-03-15 Table of contents Table of contents 1 Foreword 3 1.1 Notes on the manual 3 1.1.1
More informationSMVector Additional I/O Module Installation and Operation Manual
SMVector Additional I/O Module Installation and Operation Manual About These Instructions This documentation applies to the optional Additional I/O module for the SMVector inverter and should be used in
More informationXPSMF35. Product data sheet Characteristics. Preventa safety PLC compact - Profibus DP protocol. Main. Complementary. Safety module name
Product data sheet Characteristics XPSMF3542 Preventa safety PLC compact - Profibus DP protocol Main Range of product Product or component type Safety module name Safety module application Nov 13, 2018
More informationPowerFlex DC Drive - Frame A SCR Modules for Drives with a Power Traces Circuit Board
Installation Instructions PowerFlex DC Drive - Frame A SCR Modules for Drives with a Power Traces Circuit Board!!! ATTENTION: Only qualified personnel familiar with DC drives and associated machinery should
More informationOperating instructions. Standstill monitor A / / 2011
Operating instructions Standstill monitor A300 UK 1 2 3 4 5 6 7 8 7390337 / 01 02 / 2011 1 2 3 4 5 6 7 8 switchpoint min max pulse/min power Made in Germany ifm electronic gmbh D 45127 Essen func. I II
More informationABB Drives. User s Manual I/O Module Adapter AIMA-01
ABB Drives User s Manual I/O Module Adapter AIMA-01 I/O Module Adapter AIMA-01 User s Manual 3AFE 64661442 REV A EN EFFECTIVE: 1.12.2003 2003 ABB Oy. All Rights Reserved. 5 Safety instructions Overview
More informationCPCI-PS24 24V-Power Supply
24V-Power Supply Hardware Manual to Product I.2301.21 esd electronic system design gmbh Vahrenwalder Str. 207 30165 Hannover Germany http://www.esd.eu Phone: +49 (0) 511 3 72 98-0 Fax: +49 (0) 511 3 72
More informationTRC-190 User s Manual
User s Manual Edition 3.2, May 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used only
More informationInductive sensor BI5-EM18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationOperating instructions ClassicLine module AC5203 / AC5205 AC5208 / AC5211 AC5213 / AC5214 AC5215 / AC5233 AC /00 02/2015
Operating instructions ClassicLine module AC5203 / AC5205 AC5208 / AC5211 AC5213 / AC5214 AC5215 / AC5233 AC5294 80226775/00 02/2015 Contents 1 Preliminary note...3 2 Safety instructions...3 3 Functions
More informationRE22R1QMQ star-delta timing relay - 230VAC/440VAC - 1 C/ O
Characteristics star-delta timing relay - 230VAC/440VAC - 1 C/ O Main Range of product Product or component type Discrete output type Device short name Nominal output current Zelio Time Modular timing
More informationSeries 3700 Screw Terminal Assemblies Installation Instructions
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY www.keithley.com Series 3700 Screw Terminal Assemblies Installation Instructions Introduction This document contains handling
More informationKBMG MULTI-SPEED BOARD
TM INSTALLATION AND OPERATION MANUAL KBMG MULTI-SPEED BOARD KB Part No. 8833 Multi-Speed Board for KBMG Series Regenerative Drive Pending! See Safety Warning on Page 1 The information contained in this
More informationPSR UC/ESAM4/3X1/1X2/B
Safety relay for emergency stop and safety door monitoring Data sheet 105318_en_02 PHOENIX CONTACT 2014-06-13 1 Description The safety relay can be used in safety circuits according to EN 60240-1 and IEC
More informationSINAMICS G130. Voltage Sensing Module 10 (VSM10) Operating Instructions 05/2010 SINAMICS
SINAMICS G130 Operating Instructions 05/2010 SINAMICS s Safety information 1 General 2 SINAMICS SINAMICS G130 Voltage Sensing Module 10 (VSM10) Mechanical installation 3 Electrical installation 4 Technical
More informationAS-i Safety Relay Output Module with Diagnostic Slave
AS-i Safety Relay Output Module with Diagnostic Slave User Manual Revision date: 2013-01-30...supports the requirements for AS-i Safety up to SIL3 Subject to modifications without notice. Generally, this
More informationTSP-BCM48, TSP-BCM48A. Operating Instruction Manual. Page 1 of 13
Battery Controller Module TSP-BCM24, TSP-BCM24A TSP-BCM48, TSP-BCM48A Operating Instruction Manual http://www.tracopower.com Page 1 of 13 Dimensions drawings: TSP-BCM24 & TSP-BCM48 Weight: 0.816lb Gewicht:
More informationUSER MANUAL. Longo programmable controller LPC-2.ID2 RFID Card holder. Version 8
USER MANUAL Longo programmable controller LPC-2.ID2 RFID Card holder Version 8 SMARTEH d.o.o. / Poljubinj 114 / 5220 Tolmin / Slovenia / Tel.: +386(0) 388 44 00 / e-mail: info@smarteh.si / www.smarteh.si
More informationGS202 Encoder Switch
GS202 Encoder Switch 20:2 encoder switch 20 encoder inputs (TTL / RS422 standard) Input signals A, /A, B, /B, Z, /Z on each encoder input 2 x 6 control inputs (HTL / PNP) 2 encoder outputs (TTL / RS422
More informationXPSMCMDO Digital output pairs expansion modules with screw term
Characteristics 2 Digital output pairs expansion modules with screw term Main Range of product Product or component type Device short name Electrical connection [Us] rated supply voltage Number of inputs
More informationOperating Manual FPGA-based High-Speed Micro-PLC
ZX20T Operating Manual FPGA-based High-Speed Micro-PLC Zander GmbH & Co. KG Am Gut Wolf 15 52070 Aachen, Deutschland info@zander-aachen.de www.zander-aachen.de Part No.: E61-335-10 Edition: H03 This document
More informationSINAMICS G130. Voltage Sensing Module 10 (VSM10) Operating instructions 03/2011 SINAMICS
SINAMICS G130 Operating instructions 03/2011 SINAMICS s Safety information 1 General 2 SINAMICS SINAMICS G130 Voltage Sensing Module 10 (VSM10) Mechanical installation 3 Electrical installation 4 Technical
More informationQUINT-BUFFER/24DC/24DC/40
Buffer module Data sheet 105496_en_01 PHOENIX CONTACT 2013-11-01 1 Description The QUINT BUFFER buffer module combines the electronic switchover unit and power storage in the same housing. The buffer module
More informationGV204 Impulse Splitter for Incremental Encoders
Operating Manual www.genesisautomationonline.com GV204 Impulse Splitter for Incremental Encoders Product features: Programmable encoder input A, /A, B, /B, Z, /Z, for use with RS422 or TTL differential
More informationInstallation Instructions
Installation Instructions Cat. No. 1771-IQ16 Series C This document provides information on: The dc isolated input module is shipped in static-shielded packaging to guard against electrostatic discharge
More informationControl unit SG-EFS 104/4L. EN Operating instructions. Innovative by tradition. Version SG-EFS 104/4L AC/DC 24 V
Innovative by tradition. Control unit SG-EFS 104/4L EN Operating instructions Version 2 1004128 SG-EFS 104/4L AC/DC 24 V Original instructions Mayser GmbH & Co. KG Örlinger Straße 1 3 89073 Ulm GERMANY
More information