MUMPS IO Documentation
|
|
- Sandra Melton
- 6 years ago
- Views:
Transcription
1 MUMPS IO Documentation Copyright (c) 1999, 2000, 2001, 2002, 2003 Raymond Douglas Newman. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of Raymond Douglas Newman nor the names of the contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Introduction MUMPS IO may be performed to the following classes: Devices Files Network Pipes The MUMPS commands that are used to do IO are: OPEN USE WRITE READ CLOSE How to use these commands with each class is discussed below. Devices The Device class includes such things as the console, serial lines (terminals or printers), parallel ports (printers) and pseudo terminals (xterms). Standard in (stdin) or MUMPS channel 0 (zero) is usually of class Device.
2 OPEN for Devices NOTE: OPEN may not be used with MUMPS channel 0. The OPEN command is of the form: OPEN channel:(device:mode)[:timeout[:namespace]] channel is the MUMPS channel number from 1 to 15 inclusive. device is the full device specification - like /dev/cuaa0. mode is one of: IO - open the device for both Reading and Writing READ - open the device for Reading only WRITE - open the device for Writing only timeout is the optional time in seconds to wait for the device. For example: OPEN 1:("/dev/lpt0":"W") ;Open the printer for writing USE for Devices The USE command is of the form: USE channel[:parameters[:namespace]] channel is the MUMPS channel number from 1 to 15 inclusive. parameters are zero or more of the following. If more than one parameter is supplied, they must be enclosed in parenthesis () and separated with colons. TERMINATOR=$C(n,...) Specify the input terminators. All input terminators must be in the range of ASCII 0 to ACSII 31. The special case of $C(13,10) requires both characters to be in the input stream to terminate input. The terminating character(s) is/are returned in the special variable $KEY. The default input terminator for this class is $C(13). OUTPUT=$C(n,...) Specify the output terminators to output when WRITE! is executed. This may be up to 6 (six) characters. The default output terminators for this class are $C(13,10). [NO]CONTROLC Enable/Disable interuption of a running process. NOTE: This applies to stdin only and defaults to CONTROLC. [NO]CONTROLT Enable/Disable mimi process status. NOTE: This applies to stdin only and defaults to CONTROLT. [NO]ESCAPE Enable/Disable escape sequence processing. When enabled, escape sequences are returned in the variable $KEY.
3 The default for this class is ESCAPE. [NO]ECHO Enable/Disable character echo. The default for this class is ECHO. DELETE= Define the character delete key as NONE, BACK $C(8), DELETE $C(127) or BOTH $C(8) and $C(127). The default for this class is DELETE=DELETE. WRITE for Devices The WRITE command is of the form: WRITE comma separated list of writearguments where writearguments are:! carrige return, linefeed combination or specified out terminator expression - output any valid MUMPS expression *intexpr - output the ASCII character intexpr#256 READ for Devices The READ command is of the form: READ comma separated list of readarguments where readarguments are:! output carrige return, linefeed combination or specified out terminator variable[#count][:timeout] - input data to a maximum length of [#count] into a MUMPS variable. *variable[:timeout] - input one ASCII character as an integer (0 to 255) If :timeout is specified and is zero or a positive number, the system will wait that many seconds for data to become available. Should the read be a *variable and a single character is received or should the [#count] be reached or a terminator be received, then $TEST is set to 1. Else $TEST is set to zero. If the form READ "literal",var is used, all typeahead is canceled before the read is done. CLOSE for Devices The CLOSE command is of the form: CLOSE channel
4 Note: Closing channel 0 is ignored. Files The File class includes text files (binary or ASCII). Standard in (stdin) or MUMPS channel 0 (zero) can be of class File. OPEN for Files NOTE: OPEN may not be used with MUMPS channel 0. The OPEN command is of the form: OPEN channel:(file:mode)[:timeout[:namespace]] channel is the MUMPS channel number from 1 to 15 inclusive. file is the full file specification - like /home/me/myfile. mode is one of: APPEND - open the file for Writing and append to the end of the file READ - open the file for Reading only WRITE - open the file for Writing only and delete the current file timeout doesn't do anything for a file For example: OPEN 1:("/home/me/myfile":"W") ;Open myfile for writing USE for Files The USE command is of the form: USE channel[:parameters[:namespace]] channel is the MUMPS channel number from 1 to 15 inclusive. parameters are zero or more of the following. If more than one parameter is supplied, they must be enclosed in parenthesis () and separated with colons. TERMINATOR=$C(n,...) Specify the input terminators. All input terminators must be in the range of ASCII 0 to ACSII 31. The special case of $C(13,10) requires both characters to be in the input stream to terminate input. This is typically used for reading files created on DOS. The terminating character(s) is/are returned in the special variable $KEY. The default input terminator for this class is $C(10). OUTPUT=$C(n,...) Specify the output terminators to output when WRITE! is executed. This may be up to 6 (six) characters. The default output terminator for this class is $C(10).
5 WRITE for Files The WRITE command is of the form: WRITE comma separated list of writearguments where writearguments are:! carrige return, linefeed combination or specified out terminator expression - output any valid MUMPS expression *intexpr - output the ASCII character intexpr#256 READ for Files The READ command is of the form: READ comma separated list of readarguments where readarguments are:! output carrige return, linefeed combination or specified out terminator variable[#count] - input data to a maximum length of [#count] into a MUMPS variable. *variable - input one ASCII character as an integer (0 to 255) CLOSE for Files The CLOSE command is of the form: CLOSE channel Note: Closing channel 0 is ignored. A file may be deleted by opening it for WRITE then closing it. For example: OPEN 1:("file":"W") ;Open file to be deleted CLOSE 1 ;Delete it Network The Network class includes tcp socket connections (Server or Client). Standard in (stdin) or MUMPS channel 0 (zero) can be of class Network. OPEN for Network NOTE: OPEN may not be used with MUMPS channel 0. The OPEN command is of the form:
6 OPEN channel:(port/address:mode)[:timeout[:namespace]] channel is the MUMPS channel number from 1 to 15 inclusive. port/address is the port to be opened (Server) or the ip address space port (Client). mode is one of: TCPIP - open the specified ip address/port combination (Client connection) SERVER[=n] - open the specified port in Server mode. When =n is specified fork each connection up to a maximum of n simultaneous jobs. timeout specifies the time to wait for the connection to become available (Client) or to wait for a client to connect (Server). An error will occur when a non-existant address is assessed after a specific time. Both the error and the time are O/S specific as follows: linux FreeBSD Timeout (secs) 3 60 Error Z313 Z260 For example: OPEN 1:("80":"S=5") ;Open http port as server USE for Network The USE command is of the form: USE channel[:parameters[:namespace]] channel is the MUMPS channel number from 1 to 15 inclusive. parameters are zero or more of the following. If more than one parameter is supplied, they must be enclosed in parenthesis () and separated with colons. TERMINATOR=$C(n,...) Specify the input terminators. All input terminators must be in the range of ASCII 0 to ACSII 31. The special case of $C(13,10) requires both characters to be in the input stream to terminate input. This is typically used for reading files created on DOS. The terminating character(s) is/are returned in the special variable $KEY. The default input terminator for this class is $C(13). OUTPUT=$C(n,...) Specify the output terminators to output when WRITE! is executed. This may be up to 6 (six) characters. The default output terminator for this class is $C(13).
7 WRITE for Network The WRITE command is of the form: WRITE comma separated list of writearguments where writearguments are:! carrige return, linefeed combination or specified out terminator expression - output any valid MUMPS expression *intexpr - output the ASCII character intexpr#256 READ for Network The READ command is of the form: READ comma separated list of readarguments where readarguments are:! output carrige return, linefeed combination or specified out terminator variable[#count] - input data to a maximum length of [#count] into a MUMPS variable. *variable - input one ASCII character as an integer (0 to 255) CLOSE for Network The CLOSE command is of the form: CLOSE channel Note: Closing channel 0 is ignored. Pipes The Pipes class includes named unix pipes OPEN for Pipes The OPEN command is of the form: OPEN channel:(pipe:mode)[:timeout[:namespace]] channel is the MUMPS channel number from 1 to 15 inclusive. pipe is the full pipe specification - like /home/me/mypipe. mode is one of:
8 NEWPIPE - open a new named pipe for reading. PIPE - open an existing named pipe for writing. timeout doesn't do anything for a pipe For example: OPEN 1:("/home/me/mypipe":"N") ;Open mypipe for reading USE for Pipes The USE command is of the form: USE channel[:parameters[:namespace]] channel is the MUMPS channel number from 1 to 15 inclusive. parameters are zero or more of the following. If more than one parameter is supplied, they must be enclosed in parenthesis () and separated with colons. TERMINATOR=$C(n,...) Specify the input terminators. All input terminators must be in the range of ASCII 0 to ACSII 31. The special case of $C(13,10) requires both characters to be in the input stream to terminate input. This is typically used for reading files created on DOS. The terminating character(s) is/are returned in the special variable $KEY. The default input terminator for this class is $C(13,10). OUTPUT=$C(n,...) Specify the output terminators to output when WRITE! is executed. This may be up to 6 (six) characters. The default output terminator for this class is $C(13,10). WRITE for Pipes The WRITE command is of the form: WRITE comma separated list of writearguments where writearguments are:! carrige return, linefeed combination or specified out terminator expression - output any valid MUMPS expression *intexpr - output the ASCII character intexpr#256 READ for Pipes The READ command is of the form: READ comma separated list of readarguments
9 where readarguments are:! output carrige return, linefeed combination or specified out terminator variable[#count] - input data to a maximum length of [#count] into a MUMPS variable. *variable - input one ASCII character as an integer (0 to 255) CLOSE for Pipes The CLOSE command is of the form: CLOSE channel
HALCoGen TMS570LS31x Help: example_sci_uart_9600.c
Page 1 of 6 example_sci_uart_9600.c This example code configures SCI and transmits a set of characters. An UART receiver can be used to receive this data. The scilin driver files should be generated with
More informationOpen Source Used In TSP
Open Source Used In TSP 3.5.11 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices.
More informationColdFusion Builder 3.2 Third Party Software Notices and/or Additional Terms and Conditions
ColdFusion Builder 3.2 Third Party Software Notices and/or Additional Terms and Conditions Date Generated: 2018/09/10 Apache Tomcat ID: 306 Apache Foundation and Contributors This product includes software
More informationEcma International Policy on Submission, Inclusion and Licensing of Software
Ecma International Policy on Submission, Inclusion and Licensing of Software Experimental TC39 Policy This Ecma International Policy on Submission, Inclusion and Licensing of Software ( Policy ) is being
More informationANZ TRANSACTIVE MOBILE for ipad
ANZ TRANSACTIVE MOBILE for ipad CORPORATE CASH AND TRADE MANAGEMENT ON THE GO QUICK REFERENCE GUIDE April 2016 HOME SCREEN The home screen provides immediate visibility of your favourite accounts and transactions
More informationIntel Stress Bitstreams and Encoder (Intel SBE) 2017 AVS2 Release Notes (Version 2.3)
Intel Stress Bitstreams and Encoder (Intel SBE) 2017 AVS2 Release Notes (Version 2.3) Overview Changes History Installation Package Contents Known Limitations Attributions Legal Information Overview The
More informationEcma International Policy on Submission, Inclusion and Licensing of Software
Ecma International Policy on Submission, Inclusion and Licensing of Software Experimental TC39 Policy This Ecma International Policy on Submission, Inclusion and Licensing of Software ( Policy ) is being
More informationUser Manual. Date Aug 30, Enertrax DAS Download Client
EnertraxDL - DAS Download Client User Manual Date Aug 30, 2004 Page 1 Copyright Information Copyright 2004, Obvius Holdings, LLC. All rights reserved. Redistribution and use in source and binary forms,
More informationSystem Log NextAge Consulting Pete Halsted
System Log NextAge Consulting Pete Halsted 110 East Center St. #1035 Madison, SD 57042 pete@thenextage.com www.thenextage.com www.thenextage.com/wordpress Table of Contents Table of Contents BSD 3 License
More informationProgressBar Abstract
Doc type here 1(21) ProgressBar Abstract The WireFlow progressbar module is an easy way to add progress bars to an application. It is easy to customize the look of the displayed progress window, since
More informationTable of Contents Overview...2 Selecting Post-Processing: ColorMap...3 Overview of Options Copyright, license, warranty/disclaimer...
1 P a g e ColorMap Post-Processing Plugin for OpenPolScope software ColorMap processing with Pol-Acquisition and Pol-Analyzer plugin v. 2.0, Last Modified: April 16, 2013; Revision 1.00 Copyright, license,
More informationThe Cron service allows you to register STAF commands that will be executed at a specified time interval(s).
Cron Service User's Guide Version 1.2.6 Last updated: March 29, 2006 Overview The Cron service allows you to register STAF commands that will be executed at a specified time interval(s). Note that Cron
More informationOpen Source Used In Cisco Configuration Professional for Catalyst 1.0
Open Source Used In Cisco Configuration Professional for Catalyst 1.0 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on
More informationIETF TRUST. Legal Provisions Relating to IETF Documents. Approved November 6, Effective Date: November 10, 2008
IETF TRUST Legal Provisions Relating to IETF Documents Approved November 6, 2008 Effective Date: November 10, 2008 1. Background The IETF Trust was formed on December 15, 2005, for, among other things,
More informationNemHandel Referenceklient 2.3.1
OIO Service Oriented Infrastructure NemHandel Referenceklient 2.3.1 Release Notes Contents 1 Introduction... 3 2 Release Content... 3 3 What is changed?... 4 3.1 NemHandel Referenceklient version 2.3.1...
More informationNemHandel Referenceklient 2.3.0
OIO Service Oriented Infrastructure OIO Service Oriented Infrastructure NemHandel Referenceklient 2.3.0 Release Notes Contents 1 Introduction... 3 2 Release Content... 3 3 What is changed?... 4 3.1 NemHandel
More informationCopyright PFU LIMITED 2016
-------------------------------------------------------- PaperStream Capture Lite 1.0.1 README File -------------------------------------------------------- Copyright PFU LIMITED 2016 This file contains
More informationpyserial-asyncio Documentation
pyserial-asyncio Documentation Release 0.4 pyserial-team Feb 12, 2018 Contents 1 Short introduction 3 2 pyserial-asyncio API 5 2.1 asyncio.................................................. 5 3 Appendix
More informationIETF TRUST. Legal Provisions Relating to IETF Documents. February 12, Effective Date: February 15, 2009
IETF TRUST Legal Provisions Relating to IETF Documents February 12, 2009 Effective Date: February 15, 2009 1. Background The IETF Trust was formed on December 15, 2005, for, among other things, the purpose
More informationMagicInfo Express Content Creator
MagicInfo Express Content Creator MagicInfo Express Content Creator User Guide MagicInfo Express Content Creator is a program that allows you to conveniently create LFD content using a variety of templates.
More informationData Deduplication Metadata Extension
Data Deduplication Metadata Extension Version 1.1c ABSTRACT: This document describes a proposed extension to the SNIA Cloud Data Management Interface (CDMI) International Standard. Publication of this
More informationOpen Source Used In c1101 and c1109 Cisco IOS XE Fuji
Open Source Used In c1101 and c1109 Cisco IOS XE Fuji 16.8.1 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco
More informationOpen Source and Standards: A Proposal for Collaboration
ETSI Workshop on Open Source and ization: Legal Interactions September 16, 2016 Sophia Antipolis Open Source and s: A Proposal for Collaboration David Marr VP & Legal Counsel Open Source Group Qualcomm
More informationStatic analysis for quality mobile applications
Static analysis for quality mobile applications Julia Perdigueiro MOTODEV Studio for Android Project Manager Instituto de Pesquisas Eldorado Eric Cloninger Product Line Manager Motorola Mobility Life.
More informationPageScope Box Operator Ver. 3.2 User s Guide
PageScope Box Operator Ver. 3.2 User s Guide Box Operator Contents 1 Introduction 1.1 System requirements...1-1 1.2 Restrictions...1-1 2 Installing Box Operator 2.1 Installation procedure...2-1 To install
More informationUser Manual for Video Codec
User Manual for Video Codec CONTENTS OF THIS DOCUMENT This document contains the following sections: 1 Overview 2 System Requirements 3 Language Support 4 Installing the Software jdk installation jmf installation
More informationPreface. Audience. Cisco IOS Software Documentation. Organization
This preface describes the audience, organization, and conventions of this publication, and provides information on how to obtain related documentation. Cisco documentation and additional literature are
More informationHYDROOBJECTS VERSION 1.1
o HYDROOBJECTS VERSION 1.1 July, 2008 by: Tim Whiteaker Center for Research in Water Resources The University of Texas at Austin Distribution The HydroObjects software, source code, and documentation are
More informationSW MAPS TEMPLATE BUILDER. User s Manual
SW MAPS TEMPLATE BUILDER User s Manual Copyright (c) 2017 SOFTWEL (P) Ltd All rights reserved. Redistribution and use in binary forms, without modification, are permitted provided that the following conditions
More informationUS Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Service Data Objects (SDO) DFED Sample Application README Copyright IBM Corporation, 2012, 2013 US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract
More informationCopyright PFU LIMITED
-------------------------------------------------------- PaperStream Capture 1.0.12 README File -------------------------------------------------------- Copyright PFU LIMITED 2013-2015 This file contains
More informationiwrite technical manual iwrite authors and contributors Revision: 0.00 (Draft/WIP)
iwrite technical manual iwrite authors and contributors Revision: 0.00 (Draft/WIP) June 11, 2015 Chapter 1 Files This section describes the files iwrite utilizes. 1.1 report files An iwrite report consists
More informationcalio / form-input-nginx-module
https://github.com/ 1 of 5 2/17/2015 11:27 AM Explore Gist Blog Help itpp16 + calio / form-input-nginx-module 5 46 9 This is a nginx module that reads HTTP POST and PUT request body encoded in "application/x-www-formurlencoded",
More informationCSCE Inspection Activity Name(s):
CSCE 747 - Inspection Activity Name(s): You are inspecting the source code for the Graduate Record and Data System (GRADS) - a system that graduate students can log into and use to view their transcript
More informationBar Code Discovery. Administrator's Guide
Bar Code Discovery Administrator's Guide November 2012 www.lexmark.com Contents 2 Contents Overview...3 Configuring the application...4 Configuring the application...4 Configuring Bar Code Discovery...4
More informationFujitsu ScandAll PRO V2.1.5 README
-------------------------------------------------------- Fujitsu ScandAll PRO V2.1.5 README -------------------------------------------------------- Copyright PFU Limited 2007-2017 This file contains information
More informationAbout This Guide. and with the Cisco Nexus 1010 Virtual Services Appliance: N1K-C1010
This guide describes how to use Cisco Network Analysis Module Traffic Analyzer 4.2 (NAM 4.2) software. This preface has the following sections: Chapter Overview, page xvi Audience, page xvii Conventions,
More informationFLAMEBOSS 300 MANUAL
FLAMEBOSS 300 MANUAL Version 2.1 Download latest at FlameBoss.com/manuals WARNING: Important Safety Instructions It is important for the safety of persons to follow these instructions. Save these instructions.
More informationDefiniens. Image Miner bit and 64-bit Edition. Release Notes
Definiens Image Miner 2.1.1 32-bit and 64-bit Edition Release Notes Definiens Documentation: Image Miner 2.1.1 Release Notes Imprint 2013 Definiens AG. All rights reserved. This document may be copied
More informationLabVIEW Driver. User guide Version
LabVIEW Driver User guide Version 1.0.0 2016 Table of Contents Version History...3 Copyright...4 Software License...5 Operational Safety...6 Warranty and Support...7 Introduction...8 Requirements...9 How
More informationTWAIN driver User s Guide
4037-9571-05 TWAIN driver User s Guide Contents 1 Introduction 1.1 System requirements...1-1 2 Installing the TWAIN Driver 2.1 Installation procedure...2-1 To install the software...2-1 2.2 Uninstalling...2-1
More informationDefiniens. Image Miner bit and 64-bit Editions. Release Notes
Definiens Image Miner 2.0.2 32-bit and 64-bit Editions Release Notes Definiens Documentation: Image Miner 2.0.2 Release Notes Imprint 2012 Definiens AG. All rights reserved. This document may be copied
More informationInternet Connection Guide
Internet Connection Guide v1.10 CVP-509/505/503/501 PSR-S910/S710 Enjoy your instrument with Internet Direct Connection This instrument can be directly connected to the Internet, conveniently letting you
More informationFlask-Sitemap Documentation
Flask-Sitemap Documentation Release 0.3.0 CERN May 06, 2018 Contents 1 Contents 3 2 Installation 5 2.1 Requirements............................................... 5 3 Usage 7 3.1 Simple Example.............................................
More informationDocumentation Roadmap for Cisco Prime LAN Management Solution 4.2
Documentation Roadmap for Cisco Prime LAN Thank you for purchasing Cisco Prime LAN Management Solution (LMS) 4.2. This document provides an introduction to the Cisco Prime LMS and lists the contents of
More information@list = bsd_glob('*.[ch]'); $homedir = bsd_glob('~gnat', GLOB_TILDE GLOB_ERR);
NAME File::Glob - Perl extension for BSD glob routine SYNOPSIS use File::Glob ':bsd_glob'; @list = bsd_glob('*.[ch]'); $homedir = bsd_glob('~gnat', GLOB_TILDE GLOB_ERR); if (GLOB_ERROR) { # an error occurred
More informationPackage fst. December 18, 2017
Type Package Package fst December 18, 2017 Title Lightning Fast Serialization of Data Frames for R Multithreaded serialization of compressed data frames using the 'fst' format. The 'fst' format allows
More informationGrouper UI csrf xsrf prevention
Grouper UI csrf xsrf prevention Wiki Home Download Grouper Grouper Guides Community Contributions Developer Resources Grouper Website This is in Grouper 2.2 UI. btw, Ive heard this does not work with IE8.
More informationcs50.c /**************************************************************************** * CS50 Library 6 *
cs50.c 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. / CS50 Library
More informationTheGreenBow VPN Client ios User Guide
www.thegreenbow.com TheGreenBow VPN Client ios User Guide Property of TheGreenBow 2018 Table of Contents 1 Presentation... 3 1.1 TheGreenBow VPN Client... 3 1.2 TheGreenBow VPN Client main features...
More informationFLAME BOSS 200V2 & 300 MANUAL. Version 2.6 Download latest at FlameBoss.com/manuals
FLAME BOSS 200V2 & 300 MANUAL Version 2.6 Download latest at FlameBoss.com/manuals WARNING: Important Safety Instructions It is important for the safety of persons to follow these instructions. Save these
More informationAccuTerm 7 Internet Edition Connection Designer Help. Copyright Schellenbach & Assoc., Inc.
AccuTerm 7 Internet Edition Connection Designer Help Contents 3 Table of Contents Foreword 0 Part I AccuTerm 7 Internet Edition 6 1 Description... 6 2 Connection... Designer 6 3 Internet... Client 6 4
More informationDAP Controller FCO
Release Note DAP Controller 6.40.0412 FCO 2016.046 System : Business Mobility IP DECT Date : 30 June 2016 Category : Maintenance Product Identity : DAP Controller 6.40.0412 Queries concerning this document
More informationConettix Universal Dual Path Communicator B465
Conettix Universal Dual Path Communicator B465 en Release Notes Conettix Universal Dual Path Communicator Table of contents en 3 Table of contents 1 Introduction 4 1.1 Requirements 4 2 Version 2.00.000
More informationiphone/ipad Connection Manual
For Electone users / Connection Manual By connecting your, or ipod touch to a compatible Electone and using the various dedicated applications, you can expand the potential of the Electone and make it
More informationWatch 4 Size v1.0 User Guide By LeeLu Soft 2013
Watch 4 Size v1.0 User Guide By LeeLu Soft 2013 Introduction Installation Start using W4S Selecting a folder to monitor Setting the threshold Setting actions Starting the monitor Live Log Using monitor
More informationDefiniens. Tissue Studio Release Notes
Definiens Tissue Studio 3.0.1 Release Notes Definiens Documentation: Definiens Tissue Studio 3.0.1 Release Notes Imprint 2012 Definiens AG. All rights reserved. This document may be copied and printed
More informationopenresty / array-var-nginx-module
1 of 6 2/17/2015 11:20 AM Explore Gist Blog Help itpp16 + openresty / array-var-nginx-module 4 22 4 Add support for array variables to nginx config files 47 commits 1 branch 4 releases 2 contributors array-var-nginx-module
More informationLicense, Rules, and Application Form
Generic Interface for Cameras License, Rules, and Application Form GenICam_License.doc Page 1 of 11 Table of Contents 1 OVERVIEW... 4 2 SUBJECT OF THE GENICAM LICENSE... 4 3 RULES FOR STANDARD COMPLIANCY...
More informationDenkh XML Reporter. Web Based Report Generation Software. Written By Scott Auge Amduus Information Works, Inc.
Denkh XML Reporter Web Based Report Generation Software Written By Scott Auge sauge@amduus.com Page 1 of 13 Table of Contents License 3 What is it? 4 Basic Software Requirements 5 Basic Report Designer
More informationPacket Trace Guide. Packet Trace Guide. Technical Note
Packet Trace Guide Technical Note VERSION: 2.0 UPDATED: JANUARY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo
More informationDistinction Import Module User Guide. DISTINCTION.CO.UK
Distinction Import Module User Guide. Distinction Import Module. Licence: Copyright (c) 2018, Distinction Limited. All rights reserved. Redistribution and use in source and binary forms, with or without
More informationPTZ Control Center Operations Manual
PTZ Control Center Operations Manual Introduction PTZ Control Center is an application software that runs on Windows. By running this software on a Windows PC, you can remotely operate the Panasonic cameras
More informationExplaining & Accessing the SPDX License List
Explaining & Accessing the SPDX License List SOFTWARE PACKAGE DATA EXCHANGE Gary O Neall Source Auditor Inc. Jilayne Lovejoy ARM August, 2014 Copyright Linux Foundation 2014 1 The SPDX License List 2 The
More informationHYDRODESKTOP VERSION 1.4 QUICK START GUIDE
HYDRODESKTOP VERSION 1.4 QUICK START GUIDE A guide to using this free and open source application for discovering, accessing, and using hydrologic data February 8, 2012 by: Tim Whiteaker Center for Research
More informationRPly Documentation. Release Alex Gaynor
RPly Documentation Release 0.7.4 Alex Gaynor December 18, 2016 Contents 1 User s Guide 3 1.1 Generating Lexers............................................ 3 1.2 Generating Parsers............................................
More informationThis file includes important notes on this product and also the additional information not included in the manuals.
--- fi Series PaperStream IP driver 1.42 README file --- Copyright PFU LIMITED 2013-2016 This file includes important notes on this product and also the additional information not included in the manuals.
More informationAnybus Wireless Bridge Ethernet Bluetooth Access Point Product Guide
Anybus Wireless Bridge Ethernet Bluetooth Access Point Product Guide Document Revision Document number: 1 Release: November 21, 2014 Document version: 1 General This document is a product guide defining
More informationmodpoll is a command line based Modbus master simulator and test utility. It is free software.
Read Me Notes Revision 3.4, 2013-01-30 This Read Me file contains last-minute product information for the FieldTalk modpoll utility. modpoll is a command line based Modbus master simulator and test utility.
More informationSplunk. Splunk. Deployment Guide
Deployment Guide VERSION: 1.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered trademarks
More informationScott Auge
Scott Auge sauge@amduus.com Amduus Information Works, Inc. http://www.amduus.com Page 1 of 14 LICENSE This is your typical BSD license. Basically it says do what you want with it - just don't sue me. Written
More informationSkyPilot OS Installation: Fedora Core 5
SkyPilot OS Installation: Fedora Core 5 PN 671-00024-01 2006 SkyPilot Networks, Inc. All rights reserved This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose.
More informationSMS2CMDB Project Summary v1.6
SMS2CMDB Project Summary v1.6 Project Abstract SMS2CMDB provides the capability to integrate Microsoft Systems Management Server (MS- SMS) data with BMC Atrium CMDB (Atrium CMDB) and the BMC Remedy Asset
More informationBusiness Rules NextAge Consulting Pete Halsted
Business Rules NextAge Consulting Pete Halsted 110 East Center St. #1035 Madison, SD 57042 pete@thenextage.com www.thenextage.com www.thenextage.com/wordpress Table of Contents Table of Contents BSD 3
More informationQuarkXPress Server Manager 8.0 ReadMe
QuarkXPress Server Manager 8.0 ReadMe CONTENTS Contents QuarkXPress Server Manager 8.0 ReadMe...3 What's New in QuarkXPress Server Manager 8...4 Deprecated features, new stubs, and deploying SDK classes...4
More informationUser Guide. Calibrated Software, Inc.
User Guide Calibrated Software, Inc. Copyright 2008 Calibrated Software, Inc. All rights reserved. www.calibratedsoftware.com Your rights to the software are governed by the accompanying Software License
More informationThis file includes important notes on this product and also the additional information not included in the manuals.
--- fi Series PaperStream IP driver 1.30 README file --- Copyright PFU LIMITED 2013-2015 This file includes important notes on this product and also the additional information not included in the manuals.
More informationPackage fst. June 7, 2018
Type Package Package fst June 7, 2018 Title Lightning Fast Serialization of Data Frames for R Multithreaded serialization of compressed data frames using the 'fst' format. The 'fst' format allows for random
More informationHIS document 2 Loading Observations Data with the ODDataLoader (version 1.0)
HIS document 2 Loading Observations Data with the ODDataLoader (version 1.0) A guide to using CUAHSI s ODDataLoader tool for loading observations data into an Observations Data Model compliant database
More informationInstallation. List Wrangler - Mailing List Manager for GTK+ Part I. 1 Requirements. By Frank Cox. September 3,
List Wrangler - Email Mailing List Manager for GTK+ By Frank Cox September 3, 2012 theatre@melvilletheatre.com Abstract Do you have a mailing list of people that you send periodic emails to? If so, List
More informationVMware vcenter Log Insight Manager. Deployment Guide
VMware vcenter Log Insight Manager Deployment Guide VERSION: 6.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies
More informationPyWin32ctypes Documentation
PyWin32ctypes Documentation Release 0.1.3.dev1 David Cournapeau, Ioannis Tziakos Sep 01, 2017 Contents 1 Usage 3 2 Development setup 5 3 Reference 7 3.1 PyWin32 Compatibility Layer......................................
More informationProgramming Style & Firmware Standards
Programming Style & Firmware Standards Numerous opinions exist in academia and industry regarding programming style rules. One common opinion holds true, through poorly structured and poorly commented
More informationxxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx Android Calendar Syn (http://github.com/mukesh4u/android-calendar-sync/), Apache License 2.0 Android NDK (https://developer.android.com/tools/sdk/ndk/index.html),
More informationKEMP Driver for Red Hat OpenStack. KEMP LBaaS Red Hat OpenStack Driver. Installation Guide
KEMP LBaaS Red Hat OpenStack Driver Installation Guide VERSION: 2.0 UPDATED: AUGUST 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP
More informationAdobe Connect. Adobe Connect. Deployment Guide
Deployment Guide VERSION: 1.0 UPDATED: MARCH 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered trademarks
More informationSimba Cassandra ODBC Driver with SQL Connector
Simba Cassandra ODBC Driver with SQL Connector Last Revised: March 26, 2013 Simba Technologies Inc. Copyright 2012-2013 Simba Technologies Inc. All Rights Reserved. Information in this document is subject
More informationAvaya VPN Client Software Release 10.05_100
Avaya VPN Client Software Release 10.05_100 1. Release Summary Release Date: September 1 st, 2011 Purpose: Software maintenance release to address customer requests and software issues. 2. Important Notes
More informationEpic. Epic Systems. Deployment Guide
Epic Systems Deployment Guide VERSION: 1.0 UPDATED: AUGUST 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are
More informationNote: The version the Event service must be 1.10 or later (but less than 3.0.0).
EventManager Service User's Guide Version 1.2.7 Last updated: March 10, 2006 Overview The EventManager service allows you to register with the Event service in order to execute STAF Commands. When an Event
More informationHYDRODESKTOP VERSION 1.1 BETA QUICK START GUIDE
HYDRODESKTOP VERSION 1.1 BETA QUICK START GUIDE A guide to help you get started using this free and open source desktop application for discovering, accessing, and using hydrologic data. September 15,
More informationJPdfBookmarks Manual. by Flaviano Petrocchi
JPdfBookmarks Manual by Flaviano Petrocchi JPdfBookmarks Manual 1 Introduction 3 Installation and Uninstallation 4 Linux Instructions 4 Debian Instructions 6 Windows Instructions 6 Universal Archive Instructions
More informationUse in High-Safety Applications
------ ScanSnap Organizer V5.6L20 README File ------ - Contents - 1. Cautions for using environment-dependent characters 2. Cautions Concerning Installation 3. Cautions Concerning the Operation 4. Connecting
More informationInstalling the Shrew Soft VPN Client
Windows Install Installing the Shrew Soft VPN Client ShrewVPNWindows201211-01 Global Technology Associates 3505 Lake Lynda Drive Suite 109 Orlando, FL 32817 Tel: +1.407.380.0220 Fax. +1.407.380.6080 Email:
More informationTechnics Audio Player User Guide
Technics Audio Player User Guide Overview Technics Audio Player is simple GUI audio player software for Windows and Mac OS with high-resolution audio data processing capabilities. When connected to Technics
More informationCopyright 2010 by Microtek International, Inc. Trademarks. Important. All rights reserved.
Reference Manual Copyright 2010 by Microtek International, Inc. All rights reserved. Trademarks Microtek, the MII logo, MiPAX, MiDOCM and ScanWizard are trademarks or registered trademarks of Microtek
More informationSAM4 Reset Controller (RSTC)
APPLICATION NOTE AT06864: SAM4 Reset Controller (RSTC) ASF PROGRAMMERS MANUAL SAM4 Reset Controller (RSTC) This driver for SAM devices provides an interface for the configuration and management of the
More informationPTZ Control Center Operations Manual
PTZ Control Center Operations Manual Introduction PTZ Control Center is an application software that runs on Windows. By running this software on a Windows PC, you can remotely operate the Panasonic cameras
More informationpython-hl7 Documentation
python-hl7 Documentation Release 0.2.4 John Paulett August 18, 2014 Contents 1 Usage 3 2 MLLP network client - mllp_send 5 3 Contents 7 3.1 python-hl7 API..............................................
More informationFOR TCG ACPI Specification
ERRATA Errata Version 0.3 August 25, 2017 FOR TCG ACPI Specification Specification Version 1.20 Revision 8 January 19th, 2017 Contact: admin@trustedcomputinggroup.org Copyright TCG 2017 Disclaimers, Notices,
More information