AgGPS Autopilot Automated Steering System Quick Reference Card
|
|
- Theodore Ford
- 6 years ago
- Views:
Transcription
1 GETTING STARTED This figure shows how to connect the Trimble AgGPS Autopilot automated steering system to the AgGPS EZ-Guide Plus lightbar guidance system. Optional antenna Navigation controller Sonalert Magnetic antenna mount J2 EZ-Guide Plus lightbar system Antenna cable Mount pad Mount bracket and bolts P/N P/N EZ-Guide Plus power cable P/N EZ-Guide Plus suction cup mount Optional remote control C Warning: Before you install the Autopilot automated steering system, read the safety information on the back page of this card. Installation Keypad Refer to the installation instructions provided with the platform kit. Three of the keys on the optional remote control have been redefined for the Autopilot system. If you have a version 1.0 EZ-Guide Plus keypad, apply the keypad overlay sticker supplied with the Autopilot system.
2 Autopilot Status icon The Autopilot Status icons are: Status Icon E H F G MAIN MAP VIEW Action icons ENGAGING To select an action icon, press u or D and then press o. The Autopilot Action icon functions are: Action Icon To engage the Autopilot system, you must first define an AB Line, and the vehicle must be within the engage limits. Then do one of the following: Select 6 on the main map screen and then press o. Press 6 on the optional remote control. DISENGAGING Function 1 Nudge left 3 Nudge right 6 Engage / disengage 0 Aggressiveness Description Cannot engage because outside engage limits Can engage Currently engaged Fault with Autopilot. For more information, refer to Configuration / Autopilot Faults. The Autopilot system automatically disengages when the vehicle is outside the engage limits or when the system detects a fault. To manually disengage the system, do one of the following: Select 6 on the main map screen and then press o. Turn the steering wheel. Press 6 on the optional remote control.
3 ENABLING AUTOPILOT The Data Port Settings screen in the EZ-Guide Plus menu allows you to select the Autopilot system and the GPS receiver type. To enable the system, use the following settings: Setting Selection Input Select Autopilot as the input device. GPS Select Internal if Autopilot uses the internal GPS receiver in the EZ-Guide Plus. Select External if you have added an optional external GPS receiver, and you need to override the internal receiver. Note If you have an EZ-Guide Plus system without internal GPS, the GPS field will default to External. SELECTING STORED AB LINES The EZ-Guide Plus lightbar guidance system automatically saves the last AB Line. The lightbar system saves up to 100 straight swaths or pivots, and up to 3 curve or headland swaths. When you save more than 100 straight swaths, the swaths that have not been used for the longest time are overwritten. To load an existing AB Line: 1. Select 9 to reset guidance. The Guidance Pattern screen appears. 2. Select Select Stored AB and then press o. The AB Line selection screen appears as shown. It displays the closest AB Lines to the vehicle position, which is shown as a dot. 3. Press u or D to select the correct AB Line and then press o to confirm. 3.5 km width The system then loads the line and prompts you to confirm the implement swath width. VEHICLE SETUP To save or restore vehicle configuration files from the Autopilot controller, select Autopilot / Vehicle Setup, press u or D to select the correct vehicle and then press o to confirm. Then select one of the following: Exit to return to the Autopilot menu Use to send the configuration file to the Autopilot controller Replace to replace the file you have selected on the lightbar with the file currently stored on the Autopilot controller If you select Use or Replace, the system prompts you to confirm your action.
4 AGGRESSIVENESS While the Autopilot system is engaged, you can adjust the steering aggressiveness to improve the performance. Select 0 to access the Aggressiveness screen and then press u or D to adjust the settings. To change the percentage by which aggressiveness is increased or decreased with each press, select Autopilot / Aggressiveness and then modify the increment field. The default aggressiveness increment is 10%. NUDGE To move the guidance line back to the correct path, use the nudge function to correct for: GPS position drift when you return to the field for guidance, for example after you pause or turn off the unit. GPS satellite constellation changes as you drive in the field. To nudge, select 1 or 3, or press the nudge buttons l or r on the optional remote control. Nudge is always applied to the guidance line relative to the vehicle heading. Each nudge moves the guidance line by the specified amount in the direction shown on the button. To change the nudge increment from the default value of 3 inches, select Autopilot / Nudge Increment and then modify the field. The allowable range is from 0" to 5. Note When the increment is set to 0, the 1 and 3 nudge keys (l and r on the remote control) are inactive. To display the total accumulated nudge perpendicular to the current vehicle heading, go to Lightbar / Status Text and configure Nudge to appear on a map view or status screen. The nudge distance is reset to 0 whenever guidance is reset or the system is powered off. OPERATOR TIMEOUT As a safety feature, the Autopilot system displays a warning at regular intervals. If you do not acknowledge the warning within 30 seconds, the Autopilot system disengages. The default interval is 10 minutes. To change this interval, select Autopilot / Operator Timeout and then modify the Alert field.
5 EXTERNAL NMEA The AgGPS Autopilot controller can be configured to output roll-corrected GPS positions to another device (for example, AgGPS EZ-Map, or a yield monitor). By default this feature is turned off. To enable output, select Autopilot / External NMEA and then select a frequency in the Output Rate field. To change the baud rate, select Autopilot / External NMEA and then modify the 8N1 field. To output different message formats: 1. Select Autopilot / External NMEA and then highlight Exit. 2. Press D to display NMEA Output and then press o. 3. The NMEA Messages screen appears. Turn on or off the messages as required. Note To send NMEA output at 5 Hz or higher, Trimble recommends that you change the baud rate to at least 9600 bps for best performance. DIAGNOSTICS To view the serial number and firmware version of the Autopilot controller, select Autopilot / Diagnostics. FAULTS The Autopilot system records the last four system faults. To view them, select Autopilot / Faults. The most recent fault appears first. If you cannot resolve a fault, write down the fault information before you contact your Autopilot reseller for help.
6 SAFETY NOTICES C THE AUTOPILOT AUTOMATED STEERING SYSTEM IS SOLELY INTENDED FOR AGRICULTURAL USE IN AN OPEN FIELD ENVIRONMENT WITH AGRICULTURAL VEHICLES APPROVED BY THE MANUFACTURER FOR USE WITH AUTOPILOT, AND SHOULD NOT BE USED WITH ANY OTHER TYPE OF VEHICLE OR FOR ANY OTHER PURPOSE. Before using the system: The operator must read and acknowlege safety warnings whenever the system is turned on. Press D to scroll through the text. At the end of the text, press o to acknowledge the warnings. While using the system: Keep alert for obstacles in the path of the vehicle the Autopilot system cannot identify or avoid these. Remain in the vehicle while the Autopilot system is engaged. Use only in open fields do not engage on any type of road. ADDITIONAL INFORMATION For more information on how to use the EZ-Guide Plus lightbar and other guidance features, refer to the EZ-Guide Plus Quick Reference Card and Getting Started Guide or visit For additional information on the Autopilot system, contact your local Autopilot reseller. To purchase any of the following accessories, contact your local Autopilot reseller: optional remote control optional AgGPS EZ-Map field feature and coverage mapping software Trimble Navigation Limited. All rights reserved. Trimble, the Globe and Triangle logo, AgGPS, and EZ-Guide are trademarks of Trimble Navigation Limited, registered in the United States Patent and Trademark Office and other countries. Autopilot is a trademark of Trimble Navigation Limited. PN ENG, Rev A. (January 2005). PN ENG, Rev A
Quick Reference Card. Setting up the FmX Integrated Display with the Autopilot System
Setting up the FmX Integrated Display with the Autopilot System Quick Reference Card CONNECTING THE SYSTEM Once the Autopilot system has been professionally installed, add the FmX integrated display as
More informationIntroduction... 3 Features... 3 Harness Connections... 4
TABLE OF CONTENTS Safety Notices... 1 Introduction... 3 Features... 3 Harness Connections... 4 Basic Configuration... 5 Autopilot Main Screen... 5 GPS Settings Configuration... 6 Selecting a Correction
More informationCFX-750 Menus. Starting in the Settings Menu
Starting in the Settings Menu EZ-Pi Auto Steer Auto Steer System Type EZ-Steer/Manual Steer Ez-Pilot AutoPilot EZ-Steer/Pilot Setup EZ-Steer/Pilot Calibration Wizard Engage Options Minimum Speed Maximum
More informationQuick Reference Guide
Quick Reference Guide Envizio Pro & Envizio Pro II Overview The Envizio Pro and Envizio Pro II are all-in-one field computers capable of providing product control for up to four products (with required
More informationTable of Contents. GPS Legacy Products...1 Configuring GPS 6500 and 6000 For Legacy Displays...1
Table of Contents GPS Legacy Products...1 Configuring GPS 6500 and 6000 For Legacy Displays...1 InSight with Trimble AutoPilot...3 InSight with Trimble Auto Pilot Documentation...3 Q: How does the InSight
More informationFor use with Aeros 9040 v4.30 DynaJet Flex IC18 Sprayer v1.10
S M I T H C O S T A R T - U P G U I D E For use with Aeros 9040 v4.30 DynaJet Flex IC18 Sprayer v1.10 Table of Contents #1 POWER 1 #2 CONFIGURATION 1 DynaJet Flex... 1 IC18 Sprayer on Aeros 9040... 2 Preset
More informationwith the Yield Monitoring System Quick Reference Card
with the Yield Monitoring System Quick Reference Card Run screen When the Yield Monitoring plugin has been activated on the FmX integrated display, the Run screen appears. c j i d e f g h Item Description
More informationTroubleshooting Guide DCM-300 Modem with Correction Services
Troubleshooting Guide DCM-300 Modem with Correction Services Activation and Setup DCM-300 Modem Overview Setting up the VRS Correction Service Troubleshooting Web Service Tool Frequently Asked Questions
More informationCruizer II Snow Depth Feature
Operation Guide Cruizer II Snow Depth Feature Snow Depth Feature Overview The Cruizer II snow depth feature is designed to help snowcat or trail grooming equipment operators accurately gauge the current
More informationGETTING STARTED GUIDE
GETTING STARTED GUIDE Trimble Variety Tracking System Introduction Getting the most out of the Trimble Variety Tracking system Preparing for installation Calibrating the system Recording varieties during
More informationRELEASE NOTES. FmX Integrated Display. Introduction. Feature change overview. Feature changes. Upgrade procedure
RELEASE NOTES FmX Integrated Display Introduction Feature change overview Feature changes Upgrade procedure Version 4.00 Revision A September 2010 F Agriculture Business Area Trimble Navigation Limited
More information3500 VGS. Operator's Manual Visual Guidance System
3500 VGS Operator's Manual 3500 Visual Guidance System 3500 VGS Instruction Manual Page 1 CONTENTS 1.0 INTRODUCTION... 2 2.0 PARTS... 3 3.0 INSTALLATION... 5 3.1 3500 MOUNTING BRACKET INSTALLATION... 5
More informationActivations. Set date and time prior to entering Activation codes to ensure the Activations will be acknowledged. Data Transfer
Delivery Instructions Activations Set date and time prior to entering Activation codes to ensure the Activations will be acknowledged. Data Transfer Apex version 3.2 or newer is required to transfer data
More informationFarm Works Software Solutions: Multi Swath Line Management
FAQ AGRICULTURE January 2015 Farm Works Software Solutions: Multi Swath Line Management The Multi Swath Line Management (also known as Crop Row Management or Advanced Guidance Line Management) features
More informationPF3000 Pro Application Rate Mode - Menu Tree for Direct Drive of Rawson Accu-Rate on a planter March 2002
PF3000 Pro Application Rate Mode - Menu Tree for Direct Drive of Rawson Accu-Rate on a planter March 2002 Menu Key FIELD LOAD SHOW MAP OPTIONS CAL SETUP DIAG Press Menu Key to switch between Main Menu
More informationQuick Reference Card
with the FieldLevel II Automated Levelling System Quick Reference Card f g h i j e Run screen layout d c l m n o p q r k s Item Description Item Description c d e Cut / Fill map The difference between
More informationTopCon X5 Operator's Manual
TopCon X5 Operator's Manual Part Number TOPCONX5-EN Rev.1.0 Copyright Topcon Precision Agriculture May, 2011 All contents in this manual are copyrighted by Topcon. All rights reserved. The information
More informationGPS Ontario Newsletter 2012 Issue 2
FmX Integrated Display Version 6.5 GPS Ontario 6558 3 rd Line Road South, North Gower Ontario K0A-2T0 Office (877) 785-9346 Fax (877) 785-9328 http://www.gpsontario.ca Your Local Guidance Counsellors GPS
More informationGeoExplorer 6000 Series Quick Start Guide
GeoExplorer 6000 Series Quick Start Guide Four simple steps to get started: This guide provides an overview of the important features and instructions for how to set up and operate your Trimble GeoExplorer
More informationDisplay Quick Reference Guide
0.00 ac 0.0 mph A Operator Selection Operator Selection Select Operator Operator Full Log Out Operator Full A B JD 8130, 24 Row Planter Planter C Event: 2013-12-16_14:51:15Dave Grower: Grower1 Farm: Farm1
More informationnüvi for use with these nüvi models: 1300, 1310, 1340, 1350, 1370, 1390
nüvi 1300 series quick start manual for use with these nüvi models: 1300, 1310, 1340, 1350, 1370, 1390 2009 Garmin Ltd. or its subsidiaries March 2009 190-01050-01 Rev. A Printed in Taiwan Looking at Your
More informationMATRIX GUIDANCE RELEASE NOTES
MATRIX GUIDANCE RELEASE NOTES WARNING: Prior to v4.20, consoles with an internal GNSS receiver operate the console com port at 19200 baud rate. v4.20 and later operates the console (with internal receiver)
More informationSINCE 1966 INTELLIAG AI-120 ISO VIRTUAL TERMINAL. Operator s Manual
SINCE 1966 INTELLIAG AI-120 ISO VIRTUAL TERMINAL Operator s Manual Safety Notices... 1 Disclaimer... 1 Introduction... 3 Unit Overview... 3 Optional Functionality Requirements... 3 Installation... 5 Terminal
More informationSOFTWARE OPERATING GUIDE
SOFTWARE OPERATING GUIDE Software Version 27.* IntelliView IV Sprayer As Applied Precision Farming E-Notes Part number 47377096 1st edition English April 2012 Contents 1 GENERAL Introduction.................................................................................
More informationSupport Note. CenterPoint RTX Correction Service: Unlocking and Setting up the FM-750 Display and FM-1000 Integrated Display
Support Note Precision Agriculture & Construction October 6, 2011 CenterPoint RTX Correction Service: Unlocking and Setting up the FM-750 Display and FM-1000 Integrated Display Once you have purchased
More informationPN Rev A
Quick Start Guide PN 875-0412-01 Rev A GETTING STARTED 1 Install hydraulic kit Schedule an appointment with your dealer to complete the installation of your vehicle s REBEL autosteer hydraulic kit. 2 Check
More informationVOYAGER 570G U s E R M A N U A L U s E R M A N U A L
570g MATRIX VOYAGER PRO GS U s e r M A N U A L U s e r M a n u a l Getting Started #1 Turn Power On Press the POWER button to power on the console. #2 Home Screen Once the power up sequence has completed,
More informationnüvi 2400 series quick start manual for use with these nüvi models: 2440, 2450, 2460
nüvi 2400 series quick start manual for use with these nüvi models: 2440, 2450, 2460 Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings
More informationHome Screen Layout. Map Screen Layout
Home Screen Layout Device Information Setup Menu Select Summary Start Field Operation Power Button Map Screen Layout GPS Diagnostics Area On-Screen Lightbar Speed Pass Number Map Options -Guidance -Boundary
More informationnüvi 3700 series quick start manual for use with these nüvi models: 3750, 3760, 3790
nüvi 3700 series quick start manual for use with these nüvi models: 3750, 3760, 3790 Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings
More informationTrimble NetRS GPS Infrastructure Receiver
Trimble NetRS GPS Infrastructure Receiver Firmware Version 1.20 Release Notes Version 1.20 Revision A June 2007 T Corporate Office Trimble Navigation Limited Engineering and Construction Group 5475 Kellenburger
More informationNAVIGATION* Basic Navigation Operation. Learn how to enter a destination and operate the navigation system.
NAVIGATION* Learn how to enter a destination and operate the navigation system. Basic Navigation Operation A real-time navigation system uses GPS and a map database to show your current location and help
More informationIntroducing the Garmin nüvi 42LM Essential GPS Navigator
Introducing the Garmin nüvi 42LM Essential GPS Navigator Package Content Suction Cup Mount USB Cable Vehicle Power Cable nüvi 42LM Quick Start Manual P3 E&OE March 2013 FREE Lifetime Map Updates The nüvi
More informationEZ-Guide 250 Lightbar Guidance System Firmware Version 3.10
RELEASE NOTES EZ-Guide 250 Lightbar Guidance System Firmware Version 3.10 Introduction Changes GPS position quality indicator Upgrade procedure Version 3.10 Revision A March 2010 Part Number 92022-86-ENG
More informationTable of Contents. CenterLine 250/IC18 Quick Start Guide Chapter 1 - Product Overview... 5 Key Functions Startup Sequence...
with the CenterLine IC18 Job Computer 250 BBI 98-05150 R0 Table of Contents CenterLine 250/IC18 Quick Start Guide... 1 Chapter 1 - Product Overview... 5 Key Functions... 6 Startup Sequence... 6 CenterLine
More informationTrimble FMX/FM100 - with Hydraulic Steer - Case IH Factory Install Installation & Configuration Guide for Harness :
Trimble FMX/FM100 - with Hydraulic Steer - Case IH Factory Install Installation & Configuration Guide for Harness 727131: Summary: In order for 20/20 SeedSense Monitor to receive NMEA strings from a third
More informationThe ultimate guidance display Start saving with the Leica mojo3d
The ultimate guidance display Start saving with the Leica mojo3d The Leica mojo3d guidance display is a smarter precision guidance system designed to help you save time and money today and for years to
More informationTable of Contents. Guidance...1 AutoFarm A5 Guidance and SMS...1 Guidance Lines...3 Guidance Line Creation in SMS...5
Table of Contents Guidance...1 AutoFarm A5 Guidance and SMS...1 Guidance Lines...3 Guidance Line Creation in SMS...5 Guidance AutoFarm A5 Guidance and SMS There are two files that are used with the A5
More informationACCESSORY APPLICATIONS
Depending on your particular system configuration, the widgets below may not all appear in your widget library, or may appear differently as pictured. Note: The following widgets are current as of software
More informationRELEASE NOTES. Trimble Infrastructure GNSS Series Receivers. Introduction. New features and changes. Updating the firmware
RELEASE NOTES Trimble Infrastructure GNSS Series Receivers Introduction New features and changes Updating the firmware Version 4.17 Revision A August 2010 F Corporate office Trimble Navigation Limited
More informationOperating Instructions
Operating Instructions for Non-Touch Terminals TRACK-Leader Version: V6.20141016 30302432-02-EN Read and follow these operating instructions. Keep these operating instructions in a safe place for later
More informationTRIMBLE GPS SEARCH TECHNOLOGY FOR THE PROFESSIONAL SURVEYOR
TRIMBLE GPS SEARCH TECHNOLOGY FOR THE PROFESSIONAL SURVEYOR BY TIM LEMMON AND CHRIS VAN DER LOO, TRIMBLE APPLICATIONS SPECIALISTS, WESTMINSTER, COLORADO, U.S.A. ABSTRACT The Global Positioning System (GPS)
More informationPub Mapping GPS and Multimedia Player Quick Start Guide
Pub. 988-0160-461 Mapping GPS and Multimedia Player Quick Start Guide 1 Power Cable The Lowrance XOG GPS operates on an internal rechargeable battery. Battery charge is probably low at time of purchase.
More informationAG3000 Terminal Navigation. Basic Mode Operation
AG3000 Terminal Navigation Basic Mode Operation AG3000 Basic Mode Index Select an Option AG3000 Calibration Procedure 1.) How To Establish an A+B Line 2.) How To Establish a Contour Line 3.) How To Establish
More informationUSER GUIDE. Trimble Positions software suite: Trimble Positions Mobile extension. Introduction. Transferring data between the field and the office
USER GUIDE Trimble Positions software suite: Trimble Positions Mobile extension Introduction Transferring data between the field and the office How the extension works Finding additional information Appendix
More informationLearn how to enter a destination and operate the navigation system. Steering Wheel Controls Use the steering wheel controls to control the system.
NAVIGATION NAVIGATION* Learn how to enter a destination and operate the navigation system. Basic Navigation Operation A real-time navigation system uses GPS and a map database to show your current location
More informationQuick Start Guide. January EAZ0081L02A Rev. A
Quick Start Guide January 2014 EAZ0081L02A Rev. A Trademarks Snap-on and Vantage Ultra are trademarks of Snap-on Incorporated. All other marks are trademarks or registered trademarks of their respective
More informationnüvi quick start manual
nüvi 785 quick start manual 2009 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397.8200 or (800) 800.1020 Fax (913) 397.8282 Garmin
More informationmotorola A1600 Quick Start Guide
motorola A1600 Quick Start Guide get started CAUTION: Before using the phone for the first time, read the Important Safety and Legal Information guide included in the box. get started insert SIM card
More informationRELEASE NOTES. Trimble GPScorrect extension. Introduction. New features and changes. Product information. Known issues
RELEASE NOTES Trimble GPScorrect extension Introduction New features and changes Product information Known issues Known issues with the ArcPad software Technical assistance Version 3.10 Revision A December
More informationFrequently Asked Questions
P a g e 1 Frequently Asked Questions Contents How do I change the brightness and sound level on my display?...2 How do I change the date and time on my display?...3 Where do I find how full my memory is
More informationTrimble TMX-2050 Display Precision decisions for a smarter farm.
Trimble TMX-2050 Display Precision decisions for a smarter farm. Control Choose precision. Leave nothing to chance. You don t just work for yourself. You work to provide for your family, your community,
More informationTrimble Infrastructure GNSS Series Receivers
RELEASE NOTES Trimble Infrastructure GNSS Series Receivers Introduction New features Changes Upgrading the firmware Version 4.15 Revision A May 2010 F Corporate office Trimble Navigation Limited Engineering
More informationwaysmart Touchscreen Driver Guide
waysmart Touchscreen Driver Guide About inthinc inthinc is a global company centered on telematics, fleet solutions and driving safety. Its breakthrough driving safety solutions are designed to safeguard
More informationNAVIGATION* Basic Navigation Operation. Learn how to enter a destination and operate the navigation system.
* Learn how to enter a destination and operate the navigation system. NAVIGATION Basic Navigation Operation A real-time navigation system uses GPS and a map database to show your current location and help
More informationtrimble r10 GNSS System
TRIMBLE R10 SERIES RECEIVER QUICK START GUIDE trimble r10 GNSS System C Warning: For safety information, refer to the Safety Information section of the Trimble R10 GNSS Receiver User Guide. Five simple
More informationADVANCED OPERATOR PANEL (AOP)
ADVANCED OPERATOR PANEL (AOP) Operating Instructions Issue 04/02 English Contents 1 Warnings and Notes 3 1.1 Special Key Functions 4 2 Applications Examples 4 2.1 Single drive control using the AOP 4 2.2
More informationNAVIGATION* Basic Navigation Operation. Learn how to enter a destination and operate the navigation system.
NAVIGATION* Learn how to enter a destination and operate the navigation system. Basic Navigation Operation A real-time navigation system uses GPS and a map database to show your current location and help
More informationPowerView. Model PV-101-A, V2.3 User s Guide Section 78
PowerView Model PV-101-A, V2.3 User s Guide 10-18-11 00-02-0795 Section 78 In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications
More informationAGRICULTURE CORRECTION SERVICES
AGRICULTURE CORRECTION SERVICES NEW! CENterPoint RTX The new Trimble CenterPoint RTX Correction Service delivers GNSS enabled, repeatable 1.5-inch (4 cm) corrections to your receiver anywhere in the world.
More informationSystem 110/150 Operator's Manual
System 110/150 Operator's Manual Part Number A3663 Rev.1.31 Copyright Topcon Precision Agriculture February, 2009 All contents in this manual are copyrighted by Topcon. All rights reserved. The information
More informationToguard CE45 Dual Channel Full HD 1080P Dash Camera
Toguard CE45 Dual Channel Full HD 1080P Dash Camera IMPORTANT NOTICE 1. This product is intended for use in motor vehicle only. Do NOT install the camera where it might block the driver s view of road
More informationRevision History. Name Date Description Version Daniel Lemieux January 09, 2007 Initial Document 1.0
Ver 1.1 Table of content 1 The Base Concepts... 5 1.1 Accessing the site... 5 1.1.1 To Access the site... 5 1.2 Environment... 6 1.2.1 Identifying the different zones within the window... 6 1.3 Closing
More informationUSER GUIDE. Trimble CFX-750 Display
USER GUIDE Trimble CFX-750 Display Version 7.0 Revision A March 2015 1 Agriculture Business Area Trimble Navigation Limited Trimble Agriculture Division 10368 Westmoor Drive Westminster, CO 80021 USA trimble_support@trimble.com
More informationFHD Driving Recorder E272S/S272W. Quick Start Guide
FHD Driving Recorder E272S/S272W Quick Start Guide 400-8401-030 www.polaroidcarcam.com 1 Introduction 1.1 Package Contents The package contains the following items. In case there is any missing or damaged
More informationValley. Controls RELIABLE DURABLE PRECISE ADVANCED RESPONSIVE
Valley Controls RELIABLE DURABLE PRECISE ADVANCED RESPONSIVE Valley Control Panels Valley ICON Model Display Remote Device WiFi Access AgSense ICON Link Key Features 10-inch Color Touchscreen Option available
More informationOPERATOR S GUIDE. Document revision: 1.0 Last revised: January 29, 2018
OPERATOR S GUIDE Document revision: 1.0 Last revised: January 29, 2018 Engage Zone Control Operator s Guide 2018 Intelligent Agricultural Solutions All Rights Reserved. Engage Zone Control Operator s Guide.
More informationGETTING STARTED. Link Controller. Remote
GETTING STARTED i-pilot Link Controller Software Updates Link Controller 1. Loading the software file onto the SD card. Note that no other software loads (FF or remote) can be on the card. 2. Prep the
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trimble Autopilot Automated Steering System Fendt Tractors 500 Vario Series AutoGuide Ready: 512, 513, 514, 516 700 Vario Series AutoGuide Ready: Model year 2011 or Later 714,
More informationTrimble R10 MODEL 2 GNSS SYSTEM. C WARNING For safety information, refer to the Safety Information FIVE SIMPLE STEPS TO GET STARTED
QUICK START GUIDE Trimble R10 MODEL 2 GNSS SYSTEM C WARNING For safety information, refer to the Safety Information section of the Trimble R10 Model 2 GNSS Receiver User Guide. FIVE SIMPLE STEPS TO GET
More informationPrecision Farming System PF3000 Cotton Yield Monitor Operators Manual
Precision Farming System PF3000 Cotton Yield Monitor Operators Manual PF3000 Cotton Yield Monitor General Welcome Welcome to the family. is dedicated to the development of advanced, yet practical and
More information750 VEHICLE NAVIGATION & DRIVER INFORMATION SYSTEMS USER MANUAL
750 VEHICLE NAVIGATION & DRIVER INFORMATION SYSTEMS USER MANUAL 1 Welcome to the world of the Magellan 750NAV driving experience. Using GPS (Global Positioning System) satellites and patented VIP TM (Vehicle
More informationK-Mobile User Manual for Smartphones
K-Mobile User Manual for Smartphones Issue: 1 Rev A 8/17/2017 Legal Notices K-MATIC Blundellsands House, 34-44 Mersey View, Brighton le Sands, Liverpool, L22 6QB, UK www.k-matic.com Copyright and trademarks
More informationAccessing the Web Interface on an SPSx50/x51 GPS Receiver using Bluetooth Wireless Technology
16 April 2007 Accessing the Web Interface on an SPSx50/x51 GPS Receiver using Bluetooth Wireless Technology Summary This document describes how to access the web interface on a SPSx50/x51 Modular GPS receiver
More informationOperator Manual. MS1000 Software. Trencher Monitoring System
Operator Manual MS1000 Software Trencher Monitoring System MS1000 Software Trencher Monitoring System Operator Manual Release 1.2 This manual provides you with the basic information required to operate
More informationDPS900 SOFTWARE QUICK REFERENCE CARD FOR PILING OPERATORS
DPS900 SOFTWARE QUICK REFERENCE CARD FOR PILING OPERATORS This document contains information for piling operators on how to use the Trimble DPS900 software. For information for supervisors, please refer
More informationGPS Pathfinder ProXRT Receiver Firmware
RELEASE NOTES GPS Pathfinder ProXRT Receiver Firmware Introduction New Features and Changes Known issues Upgrading to the 4.15 firmware version Documentation Version 4.15 Revision B October 2010 F Trimble
More information2005 Buick Rendezvous Navigation System M
2005 Buick Rendezvous Navigation System M Overview... 1-1 Overview... 1-2 Features and Controls... 2-1 Features and Controls... 2-2 Navigation Audio System... 3-1 Navigation Audio System... 3-2 Index...1
More informationBOOMPILOT INSTALLATION MANUAL. BOGBALLE CALIBRATOR ZURF, ICON and UNIQ
BOOMPILOT INSTALLATION MANUAL ZURF, ICON and UNIQ MATRIX WITH BOGBALLE CONTROLLER This installation manual covers installation of Matrix with controller. We have endeavoured to deliver a fault free product.
More informationMTII4200 Level Transmitter Installation, Operation & Maintenance Instructions
Specialists in Liquid Level Indication MTII4200 Level Transmitter Installation, Operation & Maintenance Instructions Section: M500 Bulletin: M500.31 Date: 05-17-16 Supersedes: 09-30-11 1. INTRODUCTION
More informationStratus 6 Zone Kit Installation and Operation Guide
Stratus 6 Zone Kit Installation and Operation Guide Kit contents: Stratus 6 radio Docking cradle Self-adhesive wall mount for docking cradle (with alcohol wipe) Screws to attach wall mount to docking cradle
More informationPowerView. Model PV-101 User s Guide. Rev Catalog Section 78
PowerView Model PV-101 User s Guide Rev 09-10-08 00-02-0605 Catalog Section 78 In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications
More informationTrimble R/5000 Series GPS Receivers Release Notes
Trimble R/5000 Series GPS Receivers Release Notes Introduction New Features and Changes Upgrade Procedure Version 2.21 Revision A October 2004 Corporate Office Trimble Navigation Limited 5475 Kellenburger
More informationLearn how to enter a destination and operate the navigation system. Steering Wheel Controls Use the steering wheel controls to control the system.
* Learn how to enter a destination and operate the navigation system. Basic Navigation Operation A real-time navigation system uses GPS and a map database to show your current location and help guide you
More informationFULL HD Video-Blackbox
Professionally approved products. User Manual FULL HD Video-Blackbox Article no: 8802201 Index A. Feature Description... 3 B. Specification... 4 C. Accessories... 4 D. Schematic Diagram of The Installation
More informationAEROS FIELD COMPUTER RELEASE NOTES RELEASE NOTES
AEROS FIELD COMPUTER Aeros v4.33 August 2018 Support for SCM Pro v4.0.33995 Supports machines with 4 wheel steering (4WS) NOTE: See document 98-01548 for the Release Notes for SCM Pro v4.0.33995 Support
More informationInstallation and Operating Instructions
Installation and Operating Instructions TRACK-Guide Version: 20110512 30302705-02-EN Read and follow these operating instructions. Keep these operating instructions in a safe place for later reference.
More informationNAVIGATION* Basic Navigation Operation. Learn how to enter a destination and operate the navigation system.
* Learn how to enter a destination and operate the navigation system. Basic Navigation Operation NAVIGATION A real-time navigation system uses GPS and a map database to show your current location and help
More informationTrimble CU Updater OS Update Instructions
Trimble CU Updater OS Update Instructions Welcome Copyrights and Trademarks System Requirements Trimble CU Model 3 Set up Trimble S3 Servo/Autolock Total Station Set up Update OS Version 2.0 March 2011
More informationFarm Works Mobile with Geonics Sensors
Farm Works Mobile with Geonics Sensors Introduction. Farm Works Mobile is a mobile mapping, scouting and data logging program from Trimble. Farm Works Mobile is designed to communicate via an RS232 serial
More informationdēzl 570 Series Owner s Manual
dēzl 570 Series Owner s Manual 2014 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of
More informationLINAV OPERATIONS MANUAL
LINAV OPERATIONS MANUAL AG-NAV INC. 21-1228 Gorham Street Newmarket, Ontario CANADA, L3Y 8Z1 North America 1-800-99 AGNAV International +1-905-967-0909 Fax: 1-905-967-0808 Revision: 1.1.1 Date: June 2008
More informationGarmin Drive 5. Owner s Manual
Garmin Drive 5 Owner s Manual 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin.
More informationLearn how to enter a destination and operate the navigation system.
NAVIGATION Learn how to enter a destination and operate the navigation system. Basic Navigation Operation A real-time navigation system uses GPS and a map database to show your current location and help
More informationTOYOTA YARIS H/B PREMIUM AUDIO Preparation
Preparation Part Number: PT296-47141 (Extension Box) Kit Contents Item # Quantity Reqd. Description 1 1 Extension Module w/bt cable 2 1 Wire harness 3 4 Screws (M5x8) Hardware Bag Contents Item # Quantity
More informationReno A & E, 4655 Aircenter Circle, Reno, NV (775) Release Date: February 5, 2008 All Reno A&E monitors. All versions of RaeComM.
Product: RaeComM Title: RaeComM Basics Release Date: February 5, 2008 Scope: All Reno A&E monitors. All versions of RaeComM. Installing RaeComM The most current version of RaeComM software is available
More informationIF YOU ENCOUNTER ISSUES DURING ACTIVATION, PLEASE VISIT FINDMESPOT.COM/SPOTXSUPPORT FOR ASSISTANCE.
QUICK START GUIDE WELCOME Thank you for purchasing your SPOT X. Now you can stay connected with family, friends, co-workers and Search & Rescue services whenever you re off the grid. WHAT S IN THE BOX?
More informationIn-Sight 7000 Series Vision System. Optional Configurations
In-Sight 7000 Series Vision System Optional Configurations Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms
More informationTABLE OF CONTENTS. Safety Notices... 1
TABLE OF CONTENTS Safety Notices... 1 System Overview... 3 Virtual Terminal (VT)... 3 Master Switch... 4 Working Set Master (WSMT) Module (Granular Fertilizer Control)... 4 Working Set Member (WSMB) Module
More informationGENERAL DESCRIPTION... 1 INSTALLATION... 2 CONNECTIONS... 3 OVERVIEW... 6 AREA & SPEED METER SETUP (WIZARD)... 9
TABLE OF CONTENTS For Serial Numbers 30007000-7999 GENERAL DESCRIPTION... 1 INSTALLATION... 2 CONNECTIONS... 3 OVERVIEW... 6 AREA & SPEED METER SETUP (WIZARD)... 9 AREA & SPEED METER USING GPS SETUP (WIZARD)...
More information