Temposonics. Magnetostrictive Linear-Position Sensors. R-Series Model RP and RH Sensors Profibus-DP Output B Product Specification

Transcription

1 Temposonics Magnetostrictive Linear-Position Sensors R-Series Model RP and RH Sensors Profibus-DP Output B Product Specification Rugged industrial sensor Linear, absolute measurement LEDs for sensor diagnostics Non-contact sensing technology Superior accuracy, resolution up to 5 µm Non-linearity less than 0.0% Repeatability within 0.00% Direct Profibus-DP output, displacement + speed Multi-magnet position measurement (up to 5 positions per sensor) R-Series linear-position sensors R-Series model RH and RP sensors are extremely robust and are ideal for continuous operation under harsh industrial conditions. Two standard sensor housings are available. The rod housing is capable of withstanding high pressures such as those found in hydraulic cylinders. The profile extrusion housing provides convenient mounting options and sliding magnets. The sensor head contains the active signal conditioning and a complete integrated electronics interface. Double shielding is used to ensure EMI protection for unsurpassed reliability and operating safety. The benefits of magnetostrictive sensing Temposonics linear sensors use the time-based magnetostrictive position sensing principle developed by MTS. Within the sensing element, a sonic strain pulse is induced in a specially designed magnetostrictive waveguide by the momentary interaction of two magnetic fields. One field comes from a movable permanent magnet that passes along the outside of the sensor. The other field comes from an interrogation current pulse applied along the waveguide. The resulting strain pulse travels at ultrasonic speed along the waveguide and is detected at the head of the sensing element. The position of the magnet is determined with high precision and speed by accurately measuring the elapsed time between the application of the interrogation pulse and the arrival of the resulting strain pulse with a high speed counter. Using the elapsed time to determine position of the permanent magnet provides an absolute position reading that never needs recalibration or re-homing after a power loss. Non-contact sensing eliminates wear, and guarantees the best durability and output repeatability. All specifications are subject to change. Please contact MTS for specifications that are critical to your needs.

2 Enhanced monitoring and diagnostics Sensor status and diagnostic display Integrated LEDs (green/red) provide basic visual feedback for normal sensor operation and troubleshooting. LED s Profibus interface Profibus -DP interface Green Red Description ON OFF Normal function ON ON Magnet not detected or wrong quantity of magnets Flashing OFF Waiting for master parameters Flashing ON Programming mode Temposonics R-Series models RP and RH linear-position sensors fulfill all requirements of Profibus-DP (EN 5070) protocol. The sensor achieves absolute position measuring with direct transmission of serial, bit synchronous data in RS-85 standard to control units in a baud rate of Mbps maximum. The Profibus-DP interface includes the Siemens bus controller SPC. In addition to applications transmission, Profibus-DP provides powerful functionality for diagnostics and configuration, which is loaded into the bus when using the GSD electronic device data sheet. Sensor Output / Parameters Profibus-DP sensors correspond to DP-slave Class with the following features: Sensor output: - Absolute position measurement - Speed measurement - Sensor status - Error detection (e.g. magnet status) Selectable parameters: - Offset / preset for each magnet - Measuring direction; forward/reverse - Different data formats Parameters Specification Measured variable: Displacement, speed / optional: multi-magnet measurements (up to 5 magnet positions or 5 positions + velocities) Resolution: Displacement: 5 µm / other values selectable via GSD-file Speed: For 5 µm displacement resolution; 0.6 mm/s up to 500 / 0. mm/s up to 000 / 0. mm/s up to 500 / 0./s up to 7600 mm stroke length Update time (one magnet): 0.5 ms at 500 mm / ms at 000 mm / ms at 500 mm /. ms at 7600 mm stroke length. Each additional magnet add 0.05 ms. Add 0.0 ms for approximate values for speed measurements. Non-linearity: < ± 0.0% full scale (minimum ± 50 µm) Repeatability: < ± 0.00% full scale (minimum ±.5 µm) Hysteresis: < µm Outputs: Interface: Profibus-DP system ISO 798 Data format: Profibus-DP (EN 50 70) Data transmission rate: Mbit/s max. Measuring range: Profile style: 50 to 5080 mm ( to 00 in.) Rod style: 50 to 760 mm ( to 00 in.) Operating voltage: + Vdc nominal (-5 or +0%) Polarity protection: up to -0 Vdc Overvoltage protection: up to 6 Vdc Current drain: 90 ma typical Dielectric withstand voltage: 500 V (DC ground to machine ground) Operating conditions: Temperature: - 0 to +75 C, (-0 to +67 F) Relative humidity: 90% no condensation Temperature coefficient: < 5 ppm / C EMC test: Emissions IEC/EN 5008-, Immunity IEC/EN 5008-, IEC/EN ///6, level / criterium A, CE qualified Shock rating: 00 g (single hit)/iec standard (survivability) Vibration rating: 5 g/0-000 Hz/IEC standard Connection type: PROFILE STYLE (RP MODEL) Electronic head: D6 option: x 6-pin connectors (M6) one male, one female. D5 option: x 5-pin connectors (M) one male, one female, plus x -pin connector (M8) male. Aluminum housing Diagnostic display (LED s beside connectors) Sealing: IP 65 Sensor extrusion: Aluminum (Temposonics profile style) Mounting: Adjustable mounting feet or T-slot nut (M5 threads) in base channel Magnet type: Captive-sliding magnet or floating (open ring) magnet ROD STYLE (RH MODEL) Electronic head: Aluminum housing Diagnostic display (LED s beside connectors) Sealing: IP 67 Sensor rod with flange: 0L Stainless steel Operating pressure: 50 bar static, 690 bar spike (5000 psi static; 0,000 psi spike) Mounting: Any orientation. Threaded flange M8 x.5 or /-6 UNF-A Typical mounting torque: 5 N-m ( ft. - lbs.) Magnet type: Ring magnet, floating (open ring) magnet, or magnet float

3 Temposonics R-Series Profibus-DP position sensors Profibus operation modes Profibus sensors provide measurements using one or multiple magnets. The following operation modes are available: Standard measurement: - Position measurement (using one magnet) Multi-magnet measurement: - Position measurement of up to fifteen magnets simultaneously. - Position and speed of five magnets maximum. Single magnet sensor Multi-magnet sensor M Active stroke length (Measuring range) Displacement / Speed 75 mm min. (.0 in.) Ma M0 M M M M Profibus address programmer installation To install and use the Profibus-DP D6 or D5 programmer, follow the steps below:. Disconnect the bus wiring and power supply.. Connect the handheld programmer to the sensor.. Connect the power supply to the sensor. The slave address displays.. Select a new slave address and apply the new setting by pressing the button. 5. Disconnect the power and programmer. 6. Displaying and programming must be completed in hexadecimal values. Programming is limited to the legal values of 0 to 7D, ( to 5) Profibus sensors are supplied with the setup address of 7D, (5). D5 programmer part no. 57-D5 D5 connections Displacement / speed Data exchange With multi-magnet measurement, status byte and bytes of position data for each position are transmitted. The status byte consists of two modes, magnet on (0 hex) or magnet off/missing magnet (8 hex). Dependent of sensor parameters, sensor data can be transferred in different data formats, (e.g. Intel or Motorola ). Profibus address programmer accessory The Profibus address programmer is used to setup the sensor s slave address. Addressing is usually performed by the Profibus SetSlaveAddress command. If the master system or controller does not support this service, connecting the Profibus Address Programmer to the sensor will bypass the service and allow direct setup. Sensor head Sensor s Integral connector (-pin male), pinout as viewed from the end of the sensor. D6 programmer part no. 57-D6 D6 connections Pin Power Supply + Vdc (+0% / -5%) n.c DC Ground n.c. Sensor head Sensor s Integral connector (6-pin male), pin-out as viewed from the end of the sensor. Pin Function n.c. n.c n.c. n.c. 5 + Vdc 6 DC Ground

4 Model RP profile-style sensor Captive-sliding magnet LED window 9 mm (.9 in.) (0.5 in.) Beginning of stroke (Null position) 90 mm (.5 in.) Electronics housing mm (0.7 in.) Null zone Stroke length End of stroke 8 mm (. in.) Dead zone D6 connector option 5 mm (.77in.).9 mm (0.075 in.) 5.6 mm (.0 in.) 50 mm (.96 in.) 68 mm (.67 in.) Mounting foot part no O 5.5 mm (0.in.) for M5 or #0 screw.5 mm (0.57 in.) Profile-style aluminum extrusion Mounting foot part no Floating magnet (open ring) 8 mm (.0 in.) Null zone Stroke length Non-ferrous mounting support and screws 66 mm (. 6 in.) Dead zone D5 connector option 8 mm (.0 in.) 9 mm (0.75 in.) Selection of position magnets (included with sensor) A choice of two magnet mounting configurations are available with the profile-style sensor; the captivesliding magnet or the floating (open ring) magnet. Captive-sliding magnets utilize slide bearings of special material that reduce friction, and if required, help mitigate dirt build up. The slide bearings are designed to operate dry, requiring no external lubrication or maintenance. The floating magnet (open ring) mounts on the moving machine part and travels just above the sensor s profile extrusion. The open ring magnet (style M) requires a minimum distance away from ferrous metals to allow proper sensor output. It must be mounted using non-ferrous screws and a non-ferrous support bracket, or utilize a non-ferrous spacer of at least 5 mm (0. in.) thickness. 00 mm (.9 in.) Captive-sliding magnet, style S part no. 58 mm (.69 in.) (0.55 in.) Rotation: Vertical: 8 Horizontal: 60 Ball-jointed arm, M5 thread (0.55 in.) 8 rotation Floating magnet Style M part no. 56- Beginning of stroke End of stroke (Null position) 0 mm (.58 in.) Captive-sliding magnet, style V part no. 58 Ball-jointed arm, M5 thread 9 mm (0.5 in.) 57 mm (. in.) 0 mm (.58 in.) Floating (open ring) magnet, style M part no mm (0.79 in.) mm (0.95 in.) mm (0.95 in.) 5 mm (.77 in.) 6 mm (. in.) 5 mm (.05 in.) (0.57 in.) 60 Holes each. mm dia. (0.7 in.) on.9 mm dia. (0.9 in.).6 mm (0.97 in.) 0.7 mm (0.8 in.) 9 mm (. in.) 0.7 mm (0.8 in.) Max gap mm ±mm (0. in. ±0.0 in.) ID:.5 mm (0.5 in.) OD:.8 mm (.9 in.) Thickness: 7.9 mm (0. in.)

5 Model RH rod-style sensor The Temposonics R-Series rod-style sensor (Model RH) offers modular construction, flexible mounting configurations, and easy installation. It is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 0,000 psi spike), such as hydraulic cylinders. The Model RH sensor may also be mounted externally in many applications. 5 mm (0.98 in.) Beginning of stroke (Null position) Ring magnet End of stroke (0.6 in.) Rod O 0 mm (0.9 in.) Electronics Housing A D6 Connector option Flat-faced flange 95 mm (.7 in.) O-Ring 50.8 mm (.00 in.) Null zone Stroke length Dead zone Stroke dependent (refer to chart below) 9 mm (.9 in.) 05 mm (. in.) Null 50.8 mm (.00 in.) 5. mm (.00 in.) Stroke -dependent Dead Zones Stroke length Dead Zone mm ( - 97 in.) 6.5 mm (.5 in.) mm ( in.) 66 mm (.6 in.) mm (.7 in.) Electronics housing D5 Connector option 9 mm (0.7 in.) Raised-face hex flange.5 mm (0.0 in.) 5 mm (0.98 in.) Beginning of stroke (Null position) O-Ring Housing style Flange type Description A Flange threads B Dimensions C Dimensions T US customary threads with raised-face hex / -6 UNF-A.5 mm (.75 in.) 5 mm (.0 in.) S US customary threads with flat-faced hex / -6 UNF-A.5 mm (.75 in.) 5 mm (.0 in.) M Metric threads with flat-faced hex M8 x.5 6 mm (.8 in.) 5 mm (. in.) Selection of position magnets (must order separately) C B Magnets must be ordered separately with model RH position sensors. The standard ring magnet (part number 05-) is suitable for most applications. 5 mm (.09 in.) CL Magnet Float (Level Sensing Application) Part No. 57 (0.55 in.) Min. ID 5 mm (.0 in.) Spherical OD. mm (0. in.) Specific Gravity: 0.70 max. Pressure: 870 psi max. (Float for use with rod-style sensors in hydraulic fluid or fresh water applications only) (0.57 in.) Standard-ring magnet part no. 05- ID:.5 mm (0.5 in.) OD:.8 mm (.9 in.) Thickness: 7.9 mm (0. in.) 5 Holes each. mm dia. (0.7 in.) 90 o apart on.9 mm dia. (0.9 in.) Floating (open ring) magnet, style M part no Holes each. mm dia. (0.7 in.) on.9 mm dia. (0.9 in.).6 mm (0.97 in.) 0.7 mm (0.8 in.) ID:.5 mm (0.5 in.) OD:.8 mm (.9 in.) Thickness: 7.9 mm (0. in.) Ring magnet part no. 005 ID:.5 mm (0.5 in.) O.D.: 5. mm (.0 in.) Thickness: 7.9 mm (0. in.) Magnet spacer (non-ferrous spacer for use with standard ring magnet) part no. 006 ID:. mm (0.56 in.) O.D.:.8 mm (.5 in.) Thickness:. mm (0.5 in.) Holes each.9 mm O.D. (0.5 in.) 90 o apart on.9 mm O.D. (0.9 in.)

6 Cylinder installation, mounting and bus connections Profile-style sensor mounting Flexible installation in any position Temposonics model RP profile-style sensors offer two basic mounting methods, side groves for use with mounting feet or a bottom grove that accepts special T-slot nuts. Both the mounting feet and T-slot nuts can be positioned along the sensor extrusion to best secure the sensor for each particular application. Non-ferrous mounting support and screws Max gap mm ± mm (0. in. ± 0.0in.) Mounting foot and screws Note: Temposonics Model RP sensors include two mounting feet (part no. 0080) for sensors up to 50 mm (50 in.) One additional mounting foot is included for every additional 500 mm (0 in.) 5 mm (0.0 in.) T-Slot nut, M5 thread (optional, sold separately) M5 Threaded stud and nut Floating magnet (open ring) Style "M" part number 56- Rod-style sensor mounting The position magnet requires minimum distances away from ferrous metals to allow proper sensor output. The minimum distance from the front of the magnet to the cylinder end cap is 5 mm (0.6 in.). The minimum distance from the back of the magnet to the piston head is provided by the nonferrous spacer, i.e.. mm (0.5 in.). > 5 mm (0.6 in.) Min.. mm (0.5 in.) Ring magnet Non ferrous spacer Cylinder installation When used for direct stroke measurement in fluid cylinders, the sensor's stainless steel rod installs into a bore in the piston head/rod assembly as illustrated. This method guarantees a longlife and trouble-free operation. The sensor cartridge can be removed from the flange and rod housing while still installed in the cylinder. This procedure allows quick and easy sensor cartridge replacement, without the loss of hydraulic pressure. Sensor hydraulic housing flange with tube becomes a permanent part of the cylinder Bus connections D6 connector option A shielded hybrid cable is used for both bus and supply voltage connections. This provides convenient daisy-chain connections for multiple Profibus sensors. Profibus Vdc Ring magnet Sensor cartridge electronic head + sensor element, easy to replace in field with screws, (M thread,.5 mm hex socket head) RxD/TxD-N RxD/TxD-P DGND VP Ohms 90 Ohms 90 Ohms Profibus Terminator D5 connector option A separate cable is used for the bus and for the supply voltage. D5 connector option with the T connector A T connector is used with the separate bus cable to enable the bus to remain active when a sensor is disconnected. Profibus Profibus Terminator Profibus male female Profibus Terminator Vdc Vdc 6

7 Sensor connections and wiring D6 cable connector and wiring diagram Pin-out/wire color code, D6 (Shielded hybrid cable for bus and input voltage) Integral D6 connector (male/female) as viewed from end of sensor Pin-out/wire color code 5 Pin no. Wire color Function Green RxD/TxD-N (Bus) Red RxD/TxD-P (Bus) N/A DGnd (Bus termination)* N/A VP (Bus termination)* 5 Black + Vdc (-5 / +0%) 6 Blue DC Ground (0V) N/A Yellow/Green Shielding, machine ground * Signal connections for the sensor s female connector only 5 D5 Bus connector and wiring diagram 6 Male 6 Female Cable connectors, ( Field-installed D6) Ø8 mm (0.70 in.) Ø8 mm (0.70 in.) 5 mm (. in.) 8 mm (.88 in.) ) 6-pin DIN female connector with PG9 strain relief Part number 70 ) 6-pin DIN male connector with PG9 strain relief Part number pin Profibus Bus terminator Part number 57 Pin-out/wire color code, D5 Integral D5 Bus connector (male/female) as viewed from end of sensor 5 Male Pin-out/wire color code Pin no. Wire color Function N/A VP+5 (Bus termination)* Green RxD/TxD-N (Bus) N/A DGnd (Bus termination)* Red RxxD / TxD-P (Bus) 5 Shield Shield * Signal connections for the sensor s female connector only Cable connectors, (field-installed D5) 5-pin Profibus T-connector M Part number ø9 mm (0.7 in.) 70 mm (.75 in.) 0. mm (.58 in.) 9. mm (.5 in.) 9. mm (0.6 in.) 0.8 mm (.60 in.) 5 Female ø9.6 mm (0.77 in.) ø mm (0.58 in) 5-pin Profibus female connector (M) Part number mm (.58 in.) 57 mm (. in.) Input voltage Pin no. Wire color Function Brown +V Vdc (-5 / +0%) White n.c. Blue DC Ground (0V) Black n.c. ø6. mm (0.6 in.) ø9.6 mm (0.77 in.) -pin female connector (M8) Straight exit connector input voltage Part number 7050 Male 6 mm (. in.) mm (.69 in.). mm (0.87 in) ø. mm (0.55 in.) 0 mm (.57 in.) 5 mm (. in.) 5-pin Profibus male connector (M) Part number pin Profibus Bus terminator (M) Part number pin male connector (M) 90 exit connector Part number 7055 ø mm (0.7 in) 8 mm (.0 in.).5 mm (0.9 in.) -pin female connector (M8) input voltage (insert adjustable in 90 positions) Part number mm (.50 in.) 5 mm (. in.) 5-pin female connector (M) 90 exit connector Part number 705 7

8 How to Order R P Z RP = RH = RF = SENSOR MODEL Profile style Hydraulic rod style Flexible style HOUSING STYLE Model RP sensor only (magnet included): S = Captive-sliding magnet with joint at top (part number 58) V = Captive-sliding magnet with joint at front (part number 58) M = Floating magnet open ring (part number 56-) Models RH and LF sensors only (magnet must be ordered separately): T = US customary threads, raised-faced hex, and pressure tube S = US customary threads, flat-faced hex, and pressure tube M = Metric threads, flat-faced hex, and pressure tube B = Sensor cartridge only (No pressure tube, stroke lengths 7 in.). Model RF sensor only, (reference the flex housing style section in the Industrial Catalog, part number 55075),magnet must be ordered separately: S = US customary threads, flat-faced hex M = Metric threads, flat-faced hex STROKE LENGTH M = Millimeters (Encode in 5 mm increments)._ U= Inches and tenths (Encode in 0. in. increments) Stroke length notes: RH stroke range = mm ( - 00 in.) RP stroke range = mm ( - 00 in.) CONNECTION TYPE D6 = x 6 pin DIN, male/female (M6) standard D5 = x 5 pin, male/female (M), plus -pin male (M8). INPUT VOLTAGE = + Vdc (+0%, -5%) OUTPUT P = Profibus protocol (Fill in the three blanks with the following codes): 0 = Multi-magnet (multi-position measurement) max. 5 positions. 0 = Single magnet (standard) 0 = Position, velocity (max. 5 positions//velocities) NUMBER OF MAGNETS (For multi-position measurement only) Z = Number of magnets for output P0 (range 0 to 5), or for output P0 (range 0 to 05). Order additional magnets separately for multi-position measurement. 8

9 How to order Accessories Description Function/Notes Part no. Mounting feet, standard (spares) Model RP sensors come with mounting feet (see page 6) Base channel T-slot nut Nut for mounting model RP sensors. Requires M5 screw (see page 6). 060 O-Ring (spare) For use with model RH sensors with style T or S housing 5605 O-Ring (spare) For use with model RH sensors with style M housing 0 Joint-rod Sleeve ( in.) For use with model RP sensors with S or V style magnets 060 Ball-jointed arm, straight For use with model RP sensors with S or V style magnets 09 Hex-jam nut (/-6 UNF) Nylon insert lockout, for use with model RH sensors with T or S style housings Magnets and float options Description Function/Notes Part no. Small open ring (model RP spare) Magnet style M, floating magnet used with model RH and RP sensors. 56- Small ring magnet Standard magnet for model RH sensors. 05- Magnet float For use with RH sensors used to measure liquid level. 57 Captive-sliding magnet (spare) Style S captive-sliding magnet with joint at top. Comes with RP sensors. 58 Captive-sliding magnet (spare) Style V captive-sliding magnet with joint at front. Comes with RP sensors. 58 Magnet spacer For use with standard ring magnet, part no Collar Provides end of stroke stops for magnet float part no Magnet mounting screws Used to mount the standard ring magnet, part no ( screws required) Field-installed connectors Description Function/Notes Part no. 6-Pin DIN connector, straight Female, straight exit, mates to D6 connection type. See page Pin DIN connector, straight Male, straight exit, mates to D6 connection type. See page Pin Bus terminator Male, mates to D6 connection. See page Pin T-connector M, mates to D5 connection type. See page Pin cable connector Male, M, mates to D5 connection type. See page Pin cable connector Female, M, mates to D5 connection type. See page Pin Bus terminator Male, M, mates to D5 connection type Pin connector, 90 Female, 90 exit, M8 for input voltage Pin connector, straight Female, straight exit, M8 for input voltage 7050 Cables Description Function/Notes Part no. Bus hybrid cable 5 wires / x Bus, x power supply, X machine ground wire for 5000 D6 connection type Programming tools Description Function/Notes Part no. Profibus Address Programmer: Sensors with connector outlet D6 57-D6 Sensors with connector D5 57-D5 Profibus Master simulator for check-up sensor function 077 Cable Master simulator Sensors, connector outlet D6 076 Cable Master simulator Sensors, connector outlet D5 58 Profibus V MEMC Bus input box 596 Joint rod used with captive-sliding magnets () Sleeve, part no. 060 () Ball-jointed arm, part no. 09 (0.55 in.) M5 threads Rotation: 8 allowable mm (0.87 in.) 9 mm (0.5 in.) () () 7 mm (.06 in.) M5 inside thread 0. in. dia. through holes.9 mm (0.075 in.) Width =.5 mm (0.57 in.) Mounting foot Standard mounting foot part no mm (. in.) 50 mm (.97 in.) 68 mm (.68 in) 9. mm (0.6 in.) 9. mm (0.6 in.) 0 SST 9

10 How to order (continued) Optional extension rods (for use with captive-sliding magnet) Extension Rod Part No XX 5. mm (0.60 in.) (both ends) 9.5 mm (0.75 in.) M5-0.8 thread bore (both ends) Extension Rod Lengths Part No. 60. mm (.75 in.) mm (.75 in.) mm (.75 in.) mm (6.75 in.) mm (7.75 in.) mm (8.75 in.) mm (9.75 in.) mm (0.75 in.) mm (.75 in.) mm (.75 in.) Extension Rod Lengths Part No mm (5.75 in.) mm (8.75 in.) mm (0.75 in.) mm (.75 in.) mm (.75 in.) mm (0.75 in.) mm (6.75 in.) mm (.75 in.) mm (8.75 in.) mm (60.75 in.) Extension cable with connectors for the D6 connection type D SENSOR CONNECTION TYPE DF = Female connector, (straight exit), and part no cable for Profibus sensors with D6 connector. DG = Female connector, (90 exit), and part no cable for Profibus sensors with D6 connector. CABLE LENGTHS For standard length cables up to 00 ft.: 005 = 5 ft 05 = 5 ft. 05 = 5 ft. 050 = 50 ft. 00 = 00 ft. for custom length cables over 00 ft.: = Cable length (Maximum cable length is dependent on the baud rate. Refer to cable length limitations table, or consult MTS Applications Engineering. R-Series sensor models R-Series Profibus Baud rate Maximum cable or bus length MBd 0 ft. (00 m).5 MBd 650 ft. (00 m) 500 kbd 00 ft. (00 m) 87.5 kbd 80 ft. (000 m) 9.75 kbd 90 ft. (00 m) CABLE TERMINATION ( or characters depending on option selected) P0 = Pigtail connection, (no connector) DFM = Male connector, (straight exit), for daisy-chain connections of Profibus sensors with D6 connector. Only available with the DF option above. DGM = Male connector, (90 exit), for daisy-chain connections of Profibus sensors with D6 connector. Only available with the DG option above. CABLE LENGTH LIMITATIONS (Based on published Bus and Serial communications standards) Apply good industry practices for long cable runs. Keep cable away from high power AC lines and all motor drive cables. Part Number: Revision B Temposonics and MTS are registered trademarks of MTS Systems Corporation. All other trademarks are the property of their respective owners. All Temposonics sensors are covered by US patent number 5,55,98. Additional patents are pending. Printed in USA. Copyright 006 MTS Systems Corporation. All Rights Reserved. UNITED STATES MTS Systems Corporation Sensors Division 00 Sheldon Drive Cary, NC 75 Tel: (800) Fax: (99) (800) sensorsinfo@mts.com GERMANY MTS Sensor Technologie Gmbh & Co. KG Auf dem Schuffel 9 D-585 Lüdenscheid Tel: +9 / 5 / Fax: +9 / 5 / info@mtssensor.de JAPAN MTS Sensors Technology Corporation Ushikubo Bldg. 77 Aihara-cho, Machida-shi Tokyo 9-0, Japan Tel: + 8 () 775 / 88 Fax:+ 8 () 775 / info@mtssensor.co.jp