EasyAVR6 Development System
|
|
- Bernard Robbins
- 5 years ago
- Views:
Transcription
1 EasyAVR6 Development System Part No.: MPMICRO-AVR-Devel-EasyAVR6 Overview EasyAVR6 is a development system that supports a wide range of 8-, 14-, 20-, 28- and 40-pin AVR MCUs. EasyAVR6 allows AVR microcontrollers to be interfaced with a wide range of peripheral devices. Very fast, on-board USB 2.0 programmer with a simplified driver installation. Serial COG Display that uses SPI interface ia available for displaying text messages. On-board 16-bit I/O port expander MCP23S17 that uses SPI communication. EasyAVR6 features an on-board Touch Screen controller with a Touch Panel connector. Note: Touch Screen, Pencil, DS1820, LCD, Serial Cable and GLCD are not included in the price! What's On-Board RS-232 communication with a PC or a microcontroller is performed via DB9 connector. System can be configured by means of DIP switches. Each DIP switch configures one part of the system. Digital thermometer DS1820 measures temperature from -55 C to 125 C. It is connected to the system via socket. System provides support for MCUs in DIP8, DIP14, DIP20, DIP28 and DIP40 packages. It comes with an ATMEGA16. Potentiometer is used for testing multiple A/D conversions. Inputs can be configured via jumpers. USB or external power supply source is selected by moving a jumper. Power supply switch turns the system on/off. 2x16 Character COG Display is used for displaying text messages. It is connected via SPI. All pins are connected to the IDC10 connectors for further expansion.
2 35 LEDs (Light Emitting Diodes) are used to indicate the logic state of all MCU pins. On-board jumpers are used for pull-up or pull-down port configuration. They are available for all pins. 35 push buttons are used to excite microcontroller digital inputs. They are connected to all microcontrollers pins. DIP switch is used to separate port pins from pull-up or pull-down resistors. Very fast USB 2.0 programmer. There is no need for connecting the external programmer. LCD can be connected to the system via the on-board connector that is connected to MCU pins. LCD Contrast Potentiometer is used for adjusting LCD Contrast. Touch Screen can be connected to the board via the Touch screen connector. There is also a Touch Screen controller. External power supply can be DC or AC. On-board jumper is used for selecting external power supply. Quartz Crystal is replaceable. The MCU pins can be configured via jumpers as oscillator inputs or regular I/O pins. Graphic LCD 128x64 can be connected to the board via the on-board connector that is connected to MCU pins. All pins are marked on the back of the board. These marks provide basic information on the pins. Voltage level to be applied when a button is pressed (GND or +5V) is selected via on-board jumper. GLCD Contrast Potentiometer is used for adjusting Graphic LCD Contrast. Reset circuit is used to reset the microcontroller. It is connected to the MCLR pin of the microcontroller. USB UART module features the FT232RL - an interface between a USB device and the microcontroller.
3 4x4 Keypad allows efficient entry of numeric data and other characters as well. Menu Keypad enables easy and fast menu browsing for your prototype device. Port Expander enables the system to add more inputs or outputs if needed. External connector is used for programming with External programmer. JTAG port supports in-circuit debugging and firmware programming. COG 2x16 Display contrast potentiometer is used for adjusting COG. On-Board USB 2.0 Programmer On-board USB 2.0 programmer AVRprog2 doesn't use bootloader or any similar software for programming. The whole AVR memory and all pins are available to you. This is a fast USB AVR InSystem programmer ideal for your future projects. Our latest AVRprog2 Programmer is driven and powered by a single USB port on your PC. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies the driver installation. The programmer board is specifically designed for In-Circuit Serial Programming (ICSP). The External Programmer and JTAG can also be connected and used with the EasyAVR6 development system. Windows Certified Drivers Drivers for the on-board programmer are Microsoft Windows XP, Windows Vista and Windows 7 certified. The Windows certificate is a proof that the programmer supports mentioned Windows operating systems and is immediately recognized by the system, which guarantees correct Plug and Play functionality. Driver certification provides users with a wide range of benefits such as stable functioning, the ability to install and delete drivers without rebooting and compatibility with future versions of Windows. Supported Microcontrollers The EasyAVR6 development system supports a wide range of AVR microcontrollers. Newly released AVR microcontrollers will be supported by a new version of AVRProg software that is updated regularly. Here is a list of microcontrollers supported by the EasyAVR6 development system: AVR MICROCONTROLLER FAMILY AT90PWM2 AT90PWM216 AT90PWM2B AT90PWM3 AT90PWM316
4 AT90PWM3B AT90S1200 AT90S2313 AT90S2323 AT90S2343 AT90S4433 AT90S8515 AT90S8535 ATmega16 ATmega161 ATmega162 ATmega163 ATmega164P ATmega164PA ATmega165 ATmega165P ATmega168 ATmega168P ATmega169 ATmega169P ATmega32 ATmega323 ATmega324 ATmega324P ATmega324PA ATmega32A ATmega48 ATmega48P ATmega48PA ATmega644 ATmega644P ATmega644PA ATmega8 ATmega8515 ATmega8535 ATmega88 ATmega88P ATmega88PA ATmega8A ATtiny12 ATtiny13 ATtiny15 ATtiny2313 ATtiny24 ATtiny25 ATtiny26 ATtiny261 ATtiny44 ATtiny45 ATtiny461 ATtiny84 ATtiny85 ATtiny861 Examples Examples provided with this development system will show you how to connect AVR microcontrollers with other peripheral components and how to develop your prototype device easily. Each example contains a detailed description of the relevant program including comments. All these examples can be downloaded from this page as well. 7seg displays in multiplex mode. A/D conversion and displaying conversion results on LCD. A/D conversion and displaying conversion results on LEDs in binary format. A/D conversion and sending conversion result via USART. Timer 0 and time measurement. Measuring temperature with DS1820 and displaying results on LCD. Examples of SPI communication. Examples of CAN communication. Examples of Sound generation. Sending and receiving data over Ethernet. Sending and receiving data over SPI Ethernet. Displaying text on COG Display. Measuring temperature with DS1820 and displaying results on 7seg displays in multiplex mode. Interrupt upon port B state change. Detection of button pressed on port B. Displaying text on LCD. Diodes blinking on port B. Displaying text and images on Graphic LCD. Examples of I2C communication. Examples of RS485 communication. Examples of sending and receiving data using Manchester Code.
5 Examples of Sinusoid generation. Examples of SPI Graphic LCD. Examples of SPI Port Expander. Demonstration of Menu Keypad and Keypad 4x4. Touch Screen demonstration example. Measuring temperature with DS1820 and sending data to a PC via serial communication. Sending data to a PC via serial communication. Creating delay with timer 0. Creating delay with timer 1. Creating delay with timer 2. Sending data from PS/2 keyboard. One-wire communication with temperature sensor. Reading date and time from PCF8583 Real Time Clock. Examples of reading and writing data to MMC or CF cards. Examples of Toshiba T6963 Graphic LCD.
EasyPIC5 Development System
EasyPIC5 Development System Part No.: MPMICRO-PIC-Devel- EasyPIC5 Overview EasyPIC5 is a development system that supports over 120 8-, 14-, 18-, 20-, 28- and 40-pin PIC MCUs. EasyPIC5 allows PIC microcontrollers
More informationBIG8051. Development system. User manual
BIG8051 User manual All s development systems represent irreplaceable tools for programming and developing microcontroller-based devices. Carefully chosen components and the use of machines of the last
More informationCONTENTS BIGAVR2 KEY FEATURES 4 CONNECTING THE SYSTEM 5 INTRODUCTION 6
CONTENTS BIGAVR2 KEY FEATURES 4 CONNECTING THE SYSTEM 5 INTRODUCTION 6 Switches 7 Jumpers 8 MCU Sockets 9 Power Supply 11 On-board USB 2.0 Programmer 12 Oscillator 14 LEDs 15 Reset Circuit 17 Push-buttons
More informationCONTENTS. dspicpro4 KEY FEATURES 4 CONNECTING THE SYSTEM 5 INTRODUCTION 6
CONTENTS dspicpro4 KEY FEATURES 4 CONNECTING THE SYSTEM 5 INTRODUCTION 6 Switches and Jumpers 7 MCU Sockets 8 Power Supply 10 On-Board USB 2.0 Programmer 11 MikroICD 12 RS-232 Communication Circuit 13
More informationAC-PG-USBASP USBASP AVR Programmer
AC-PG-USBASP USBASP AVR Programmer User Guide Download drivers from Jaycar website under the product download section TABLE OF CONTENTS 1. OVERVIEW... 2 1.1. Introduction... 2 1.2. References... 2 1.2.1.
More informationAVR Intermediate Development Board. Product Manual. Contents. 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help
AVR Intermediate Development Board Product Manual Contents 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help 1. Overview 2. Features The board is built on a high quality FR-4(1.6
More informationDownloaded from Elcodis.com electronic components distributor
CONTENTS LV24-33A KEY FEATURES 4 CONNECTING THE SYSTEM 5 INTRODUCTION 6 Switches and Jumpers 7 MCU Sockets 8 Power Supply 10 On-board USB 2.0 Programmer 11 RS-232 Communication Circuit 12 LEDs 14 Push
More informationEasy24-33 v6. Development System. User manual
Easy24-33 v6 User manual All s development systems represent irreplaceable tools for programming and developing microcontroller-based devices. Carefully chosen components and the use of machines of the
More informationBIGdsPIC6. Development System. User manual
BIGdsPIC6 User manual All s development systems represent irreplaceable tools for programming and developing microcontroller-based devices. Carefully chosen components and the use of machines of the last
More informationTEVATRON TECHNOLOGIES PVT. LTD Embedded! Robotics! IoT! VLSI Design! Projects! Technical Consultancy! Education! STEM! Software!
Summer Training 2016 Advance Embedded Systems Fast track of AVR and detailed working on STM32 ARM Processor with RTOS- Real Time Operating Systems Covering 1. Hands on Topics and Sessions Covered in Summer
More informationMega128-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN (317) (317) FAX
Mega128-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN 46268 (317) 471-1577 (317) 471-1580 FAX http://www.prllc.com GENERAL The Mega128-Development board is designed for
More information2 in 1. EasyAVR4 User s Manual AVR. MikroElektronika. Software and Hardware solutions for Embedded World
SOFTWARE AND HARDWARE SOLUTIONS FOR THE EMBEDDED WORLD - Books - Compilers User s Manual 2 in 1 2.0 IN-CIRCUIT PROGRAMMER ATMEL AVR DEVELOPMENT BOARD With useful implemented peripherals, plentiful practical
More information8051 Intermidiate Development Board. Product Manual. Contents. 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help
8051 Intermidiate Development Board Product Manual Contents 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help 1. Overview 2. Features The board is built on a high quality FR-4(1.6
More information2 in 1. BigAVR User s Manual AVR. MikroElektronika. Software and Hardware solutions for Embedded World
SOFTWARE AND HARDWARE SOLUTIONS FOR THE EMBEDDED WORLD - Books - Compilers User s Manual 2 in 1 USB 2.0 IN-CIRCUIT PROGRAMMER ATMEL AVR DEVELOPMENT BOARD With useful implemented peripherals, plentiful
More informationGoal: We want to build an autonomous vehicle (robot)
Goal: We want to build an autonomous vehicle (robot) This means it will have to think for itself, its going to need a brain Our robot s brain will be a tiny computer called a microcontroller Specifically
More informationPridgen Vermeer Robotics ATmega128 Revision 0
Features: 6x 8-bit I/O Ports 4x A/D Inputs 6x PWM Headers 2x RS 232 Terminals Power Bus LCD Header (4-bit mode) Smart Power Connecter Power Switch Header Power LED Debug LED Note: Some pins have multiple
More informationPVK40. User's manual. Feature Rich Development and Educational Kit for 40-pin Microchip PIC microcontrollers
PVK40 User's manual Feature Rich Development and Educational Kit for 40-pin Microchip PIC microcontrollers CONTENTS PVK40 3 On-board peripherals: 3 Power supply 4 Microcontroller 4 Reset circuitry 4 Oscilator
More informationUNI-DS3. Development System. User manual
All s development systems represent irreplaceable tools for programming and developing microcontroller-based devices. Carefully chosen components and the use of machines of the last generation for mounting
More informationHands on Experience with AVR32
Hands on Experience with AVR32 By: Mazhar Hussain mazhar.hussain @miun.se Muhammad Amir Yousaf 1 Tutorial Overview Introduction to AT32UC3A0512 (µ-controller) µ-controller Sensors Display Peripherals AVR
More informationAVR/8051 USB PROGRAMMER
U s e r M a n u a l f o r A V R / 8 0 5 1 U S B Z I F P r o g r a m m e r P a g e 1 PRODUCT OF It s just an idea until you execute it AVR/8051 USB PROGRAMMER USER MANUAL FOR WINDOWS 8.0 OS U s e r M a
More informationBolt 18F2550 System Hardware Manual
1 Bolt 18F2550 System Hardware Manual Index : 1. Overview 2. Technical specifications 3. Definition of pins in 18F2550 4. Block diagram 5. FLASH memory Bootloader programmer 6. Digital ports 6.1 Leds and
More informationPCB-AVR1284-3U. AVR Microcontroller Development PCB for Atmel 40-pin DIP AVRs.
PCB-AVR1284-3U AVR Microcontroller Development PCB for Atmel 40-pin DIP AVRs. Part Number: PCB-AVR1284-3U (unpopulated PCB, no parts) Features A development board for Atmel 40 pin AVR microcontrollers.
More informationThe industrial technology is rapidly moving towards ARM based solutions. Keeping this in mind, we are providing a Embedded ARM Training Suite.
EMBEDDED ARM TRAINING SUITE ARM SUITE INCLUDES ARM 7 TRAINER KIT COMPILER AND DEBUGGER THROUGH JTAG INTERFACE PROJECT DEVELOPMENT SOLUTION FOR ARM 7 e-linux LAB FOR ARM 9 TRAINING PROGRAM INTRODUCTION
More informationLesson 5 Arduino Prototype Development Platforms. Chapter-8 L05: "Internet of Things ", Raj Kamal, Publs.: McGraw-Hill Education
Lesson 5 Arduino Prototype Development Platforms 1 Arduino Boards, Modules And Shields Popular AVR MCU based products Each board has clear markings on the connection pins, sockets and in-circuit connections
More informationET-AVRProg mini. Technical Specifications of ET-AVRProg mini
ET-AVRProg mini ET-AVRProg mini is the board that is designed to download HEX File into AVR Microcontroller of ATMEL through PORT ISP. It is compatible with Program AvrProg, AvrOspll, CodeVision, avrdude
More informationAn FTDI connection: The ATtiny microcontrollers don t have a hardware UART External Crystal header pins for an optional crystal
Getting Started with the T-Board The T-Board modules were designed to speed up your AVR prototyping. This guide will show you just how quickly you can get up and running with the Hello World for microcontrollers
More informationXNUCLEO-F030R8, Improved STM32 NUCLEO Board
XNUCLEO-F030R8, Improved STM32 NUCLEO Board STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F030R8 XNUCLEO-F030R8 Features Compatible with NUCLEO-F030R8, onboard Cortex-M0 microcontroller
More informationMega128-Net Mega128-Net Mega128 AVR Boot Loader Mega128-Net
Mega128-Net Development Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN 46268 (317) 471-1577 (317) 471-1580 FAX http://www.prllc.com GENERAL The Mega128-Net development board is designed
More informationMegaAVR-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN (317) (317) FAX
MegaAVR-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN 46268 (317) 471-1577 (317) 471-1580 FAX http://www.prllc.com GENERAL The MegaAVR-Development board is designed for
More informationCEIBO FE-5111 Development System
CEIBO FE-5111 Development System Development System for Atmel W&M T89C5111 Microcontrollers FEATURES Emulates Atmel W&M T89C5111 4K Code Memory Real-Time Emulation and Trace Frequency up to 33MHz/5V ISP
More informationCEIBO FE-51RD2 Development System
CEIBO FE-51RD2 Development System Development System for Atmel AT89C51RD2 Microcontrollers FEATURES Emulates Atmel AT89C51RD2 60K Code Memory Real-Time Emulation Frequency up to 40MHz / 3V, 5V ISP and
More informationAVR Peripheral Board. Campus Component Pvt. Ltd.
AVR Peripheral Board Campus Component Pvt. Ltd. DISCLAIMER Information furnished is believed to be accurate and reliable at the time of publication. However, Campus Component Pvt. Ltd. assumes no responsibility
More information3.3V regulator. JA H-bridge. Doc: page 1 of 7
Digilent Cerebot Board Reference Manual Revision: 11/17/2005 www.digilentinc.com 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The Digilent Cerebot Board is a useful tool for
More informationCourseContents: 1.Introduction to MATLAB. 2. Handling data and data flow in MATLAB. 3. Editing and Debugging M-FILES
CourseContents: 1.Introduction to MATLAB Historical Background Demo & Applications Scope of MATLAB Importance to Engineers Features Vectors & Arrays Accessing MATLAB Help MATLAB Environment Workspace &
More informationDEV-1 HamStack Development Board
Sierra Radio Systems DEV-1 HamStack Development Board Reference Manual Version 1.0 Contents Introduction Hardware Compiler overview Program structure Code examples Sample projects For more information,
More informationArduino Dock 2. The Hardware
Arduino Dock 2 The Arduino Dock 2 is our supercharged version of an Arduino Uno R3 board. These two boards share the same microcontroller, the ATmel ATmega328P microcontroller (MCU), and have identical
More informationIntel Galileo gen 2 Board
Intel Galileo gen 2 Board The Arduino Intel Galileo board is a microcontroller board based on the Intel Quark SoC X1000, a 32- bit Intel Pentium -class system on a chip (SoC). It is the first board based
More informationEvB 4.3 v4 User s Guide
EvB 4.3 v4 User s Guide Page 1 Contents Introduction...4 The EvB 4.3 v4 kit...5 Power supply...6 Programmer s connector...7 USB Port...8 RS485 Port...9 LED's...10 Pushbuttons...11 Potentiometers and Buzzer...12
More informationUSB Debug Adapter. Power USB DEBUG ADAPTER. Silicon Laboratories. Stop. Run. Figure 1. Hardware Setup using a USB Debug Adapter
C8051F38X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F38x Development Kit contains the following items: C8051F380 Target Board C8051Fxxx Development Kit Quick-start Guide Silicon Laboratories
More informationCEIBO FE-W7 Development System
CEIBO FE-W7 Development System Development System for Winbond W7xxxx Microcontrollers FEATURES Emulates Winbond W77xxx or W78xxx Microcontrollers 125K Code Memory Real-Time Emulation Frequency up to fmax
More informationATMega128 Rapid Robot Controller Board [RKI-1148]
ATMega128 Rapid Robot Controller Board [RKI-1148] Users Manual Robokits India info@robokits.co.in Robokits World http://www.robokitsworld.com http://www.robokitsworld.com Page 1 Thank you for purchasing
More informationKinetis K70 System-On-Module (SOM) Baseboard Hardware Architecture
Kinetis K70 System-On-Module (SOM) Baseboard Version 1.0 Table of Contents 1. OVERVIEW...3 2. REFERENCES...3 3. HARDWARE PLATFORM...3 3.1. OVERVIEW...3 3.2. FUNCTIONAL BLOCK DIAGRAM...4 3.3. SOM CONNECTORS...4
More informationEVBQE128. Evaluation Board for Freescale Flexis QE128. User s Manual
EVBQE128 Evaluation Board for Freescale Flexis QE128 User s Manual EVBQE128 Evaluation Board for Freescale Flexis QE128 Microcontrollers (80-Pin LQFP) User s Manual Revision 1.1 Copyright 2007 SofTec
More informationeip-24/100 Embedded TCP/IP 10/100-BaseT Network Module Features Description Applications
Embedded TCP/IP 10/100-BaseT Network Module Features 16-bit Microcontroller with Enhanced Flash program memory and static RAM data memory On board 10/100Mbps Ethernet controller, and RJ45 jack for network
More informationFigure 1-1 ISPAVRU1 application
ISP AVR Programmer through USB Main Features AVR Studio Interface (AVR Studio 4.12 or later) Supports all AVR Device with ISP interface, refer to AVR Studio Programs both Flash and EEPROM Supports Fuse
More informationET-AVR START KIT V 1.0 / EXP
ET-AVR START KIT V 1.0 / EXP ET-AVR START KIT V1.0 / EXP which is a set of AVR Base Socket supports using with Module ET-AVR STAMP ATmega64/128 or other AVR Module in the same size. In the part of AVR
More informationBC-USB-Kit Manual. First Edition. February, BeatCraft, Inc.
BC-USB-Kit Manual First Edition February, 2015 BeatCraft, Inc. 1. Overview BC-USB-Kit is a USB-gadget development kit, which is equipped with a micro controller of Microchip Technology Inc, PIC24FJ128GB202
More informationAC-PG-USBASP USBASP AVR Programmer
AC-PG-USBASP-UG TABLE OF CONTENTS 1. OVERVIEW... 1 1.1. Introduction... 1 1.2. References... 1 1.2.1. Referenced Web Pages... 1 1.2.2. Acronyms and Abbreviations... 1 1.2.3. Definitions... 2 1.3. Supported
More informationDisplay Real Time Clock (RTC) On LCD. Version 1.2. Aug Cytron Technologies Sdn. Bhd.
Display Real Time Clock (RTC) On LCD PR12 Version 1.2 Aug 2008 Cytron Technologies Sdn. Bhd. Information contained in this publication regarding device applications and the like is intended through suggestion
More informationQuick Start Guide for TRK-MPC5634M. Starter TRAK. TRK-MPC5634M Automotive powertrain and precision timed industrial applications
Quick Start Guide for TRK-MPC5634M Starter TRAK TRK-MPC5634M Automotive powertrain and precision timed industrial applications Starter TRAK Get to Know the TRK-MPC5634M MPC5634M LIN Connectors LEDs USB
More informationPROGRAMMING AND CUSTOMIZING
PROGRAMMING AND CUSTOMIZING THE PICAXE MICROCONTROLLER SECOND EDITION DAVID LINCOLN Mc Grauu Hill New York Chicago San Francisco Lisbon London Madrid Mexico City Milan New Delhi San Juan Seoul Singapore
More informationZL10AVR. Versatile Evaluation Board for AVR Microcontrollers
Versatile Evaluation Board for AVR Microcontrollers Thank you for buying ZL10AVR evaluation board. We hope that the power and quality of our tool allow you to appreciate the advantages of AVR microcontrollers
More informationMEXLE. International Educational Platform. International Educational Platform. for Informatics based on Embedded Systems
MEXLE for Informatics based on Embedded Systems Overview 1. Introduction 2. MiniMEXLE Hardware 3. ATMEL AVR Microcontrollers 4. Teaching Informatics with MEXLE 2 HSHN G. Gruhler (2006) Einfuehrung-miniMEXLE-AVR.ppt
More informationClicker 2 for Kinetis
Page 1 of 6 Clicker 2 for Kinetis From MikroElektonika Documentation clicker 2 for Kinetis is a compact dev. kit with two mikrobus sockets for click board connectivity. You can use it to quickly build
More informationThe Atmel ATmega328P Microcontroller
Ming Hsieh Department of Electrical Engineering EE 459Lx - Embedded Systems Design Laboratory 1 Introduction The Atmel ATmega328P Microcontroller by Allan G. Weber This document is a short introduction
More informationAVRUSBPRG1 USB AVR IN SYSTEM PROGRAMMER
AVRUSBPRG1 USB AVR IN SYSTEM PROGRAMMER 2016 Table of Contents 1- Introduction 1.1- AVRUSBPRG1 Features 1.2- Supported Devices 1.3- System Requirement 1.4- Pinout 2- AVRUSBPRG1 Driver Installation 3- Running
More informationDiploma in Embedded Systems
Diploma in Embedded Systems Duration: 5 Months[5 days a week,3 hours a day, Total 300 hours] Module 1: 8051 Microcontroller in Assemble Language Characteristics of Embedded System Overview of 8051 Family
More informationShack Clock kit. U3S Rev 2 PCB 1. Introduction
Shack Clock kit U3S Rev 2 PCB 1. Introduction Thank you for purchasing the QRP Labs Shack Clock kit. This clock uses the Ultimate3S QRSS/WSPR kit hardware, but a different firmware version. It can be used
More informationVarious power connectors. 3.3V regulator. 64K Flash (Internal) 2K EEPROM (Internal) 4K SRAM (Internal) JA Mem Adr/ Data. Doc: page 1 of 9
Cerebot II Board Reference Manual Revision: September 14, 2007 Note: This document applies to REV B of the board. www.digilentinc.com 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview
More informationUzebox JAMMA. Operation manual. (For Uzebox JAMMA Rev. C devices)
Uzebox JAMMA Operation manual (For Uzebox JAMMA Rev. C devices) Basement Hobbies 2011 Contents Warnings 2 Introduction 3 Materials 4 Overview 5 Installation 6 Operation 7 Troubleshooting 13 Contact 16
More informationkeyestudio Keyestudio MEGA 2560 R3 Board
Keyestudio MEGA 2560 R3 Board Introduction: Keyestudio Mega 2560 R3 is a microcontroller board based on the ATMEGA2560-16AU, fully compatible with ARDUINO MEGA 2560 REV3. It has 54 digital input/output
More informationARDUINO MEGA ADK REV3 Code: A000069
ARDUINO MEGA ADK REV3 Code: A000069 OVERVIEW The Arduino MEGA ADK is a microcontroller board based on the ATmega2560. It has a USB host interface to connect with Android based phones, based on the MAX3421e
More informationAVR MICROCONTROLLER PROJECT TUTORIAL E-PUB
14 May, 2018 AVR MICROCONTROLLER PROJECT TUTORIAL E-PUB Document Filetype: PDF 151.29 KB 0 AVR MICROCONTROLLER PROJECT TUTORIAL E-PUB Premium source of Projects Tutorials Code Ebooks Library for Atmels
More informationSBR The Chameleon Converter II
SBR 0981 The Chameleon Converter II Security Engineering 2003-2015 The Chameleon converter II: Concept: The Chameleon converter II is a one-fits-all protocol conversion PCB that is designed to host one
More informationDoc: page 1 of 6
Cerebot Nano Reference Manual Revision: February 6, 2009 Note: This document applies to REV A of the board. www.digilentinc.com 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview
More informationLPC2468 Industrial Reference Design Platform System Development Kit Version 1.2. August 2008
QuickStart Guide LPC2468 Industrial Reference Design Platform System Development Kit Version 1.2 August 2008 1.0 System Overview The LPC2468 Industrial Reference Design (IRD) is a platform targeted at
More informationAdafruit Metro Mini. Created by lady ada. Last updated on :12:28 PM UTC
Adafruit Metro Mini Created by lady ada Last updated on 2018-01-24 08:12:28 PM UTC Guide Contents Guide Contents Overview Pinouts USB & Serial converter Microcontroller & Crystal LEDs Power Pins & Regulators
More information7/12/2012. FS2009USB - Portable In-System (ISP) Programmer for ARM microcontrollers
Page 1 of 7 FS2009USB Portable InSystem (ISP) Programmer for ARM microcontrollers The FS2009(ARM) is a portable ISP programmer supporting highspeed InSystem Programming (ISP) of the onchip FLASH memory
More informationARDUINO UNO REV3 Code: A000066
ARDUINO UNO REV3 Code: A000066 The UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can
More information3 in 1 ICD. EASYdsPIC4 User s Manual. MikroElektronika. Software and Hardware solutions for Embedded World
SOFTWARE AND HARDWARE SOLUTIONS FOR THE EMBEDDED WORLD - Books - Compilers EASYdsPIC4 User s Manual mikro 3 in 1 IN-CIRCUIT DEBUGGER MICROCHIP dspic DEVELOPMENT BOARD USB 2.0 IN-CIRCUIT PROGRAMMER With
More informationARDUINO UNO REV3 SMD Code: A The board everybody gets started with, based on the ATmega328 (SMD).
ARDUINO UNO REV3 SMD Code: A000073 The board everybody gets started with, based on the ATmega328 (SMD). The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output
More informationProgrammer AVR USBasp
202 Programmer AVR USBasp User Manual 202-02- 2 CONTENTS. INTRODUCTION... 3. What is USBasp?... 3.2 Technical teature... 3.3 Supported microcontrollers... 3.4 Kit contents... 4 2. TECHNICAL DESIGN... 5
More informationPIC Microcontroller Introduction
PIC Microcontroller Introduction The real name of this microcontroller is PICmicro (Peripheral Interface Controller), but it is better known as PIC. Its first ancestor was designed in 1975 by General Instruments.
More informationAn Arduino Controlled 1 Hz to 60 MHz Signal Generator
An Arduino Controlled 1 Hz to 60 MHz Signal Generator Greg McIntire, AA5C AA5C@arrl.net WWW..ORG 1 Objectives Build a standalone 60 MHz signal generator based on the DDS-60 board. Originally controlled
More informationGeneral-Purpose Microcontroller Module 12a Hardware Reference Release 1.4a (October 11, 2017)
General-Purpose Microcontroller Module 12a Hardware Reference 1 General-Purpose Microcontroller Module 12a Hardware Reference Release 1.4a (October 11, 2017) Purpose: General-purpose platform to accommodate
More informationMercury System SB310
Mercury System SB310 Ultrasonic Board - Product Datasheet Author Francesco Ficili Date 20/05/2018 Status Released Pag. 1 Revision History Version Date Author Changes 1.0 20/05/2018 Francesco Ficili Initial
More informationAVR-P20 development board Users Manual
AVR-P20 development board Users Manual All boards produced by Olimex are ROHS compliant Revision A, October 2005 Copyright(c) 2009, OLIMEX Ltd, All rights reserved Page 1 INTRODUCTION: The AVR Microcontrollers
More informationDoc: page 1 of 8
Minicon Reference Manual Revision: February 9, 2009 Note: This document applies to REV C of the board. 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The Minicon board is a
More informationClock and Fuses. Prof. Prabhat Ranjan Dhirubhai Ambani Institute of Information and Communication Technology, Gandhinagar
Clock and Fuses Prof. Prabhat Ranjan Dhirubhai Ambani Institute of Information and Communication Technology, Gandhinagar Reference WHY YOU NEED A CLOCK SOURCE - COLIN O FLYNN avrfreaks.net http://en.wikibooks.org/wiki/atmel_avr
More informationBuilding your own special-purpose embedded system gadget.
Bare-duino Building your own special-purpose embedded system gadget. Saves a little money. You can configure the hardware exactly the way that you want. Plus, it s fun! bare-duino 1 Arduino Uno reset I/O
More informationPrototyping Module Datasheet
Prototyping Module Datasheet Part Numbers: MPROTO100 rev 002 Zenseio LLC Updated: September 2016 Table of Contents Table of Contents Functional description PROTOTYPING MODULE OVERVIEW FEATURES BLOCK DIAGRAM
More informationMX Educational Target User Manual
MX Educational Target User Manual Revision History Date Description Initial release. Table of Contents 1. Introduction... 4 1.1. Module Models... 4 1.2. Package Contents... 4 1.3. Key Hardware Features...
More informationHello, and welcome to this presentation of the STM32 general-purpose IO interface. It covers the general-purpose input and output interface and how
Hello, and welcome to this presentation of the STM32 general-purpose IO interface. It covers the general-purpose input and output interface and how it allows connectivity to the environment around the
More informationLab Course Microcontroller Programming
Technische Universität München Fakultät für Informatik Forschungs- und Lehreinheit Informatik VI Robotics and Embedded Systems Lab Course Microcontroller Programming Michael Geisinger geisinge@in.tum.de
More informationLPC2148 DEV BOARD. User Manual.
LPC2148 DEV BOARD User Manual www.coineltech.com www.coineltech.com Designed by CoiNel Technology Solutions LLP No-816, 2 nd Floor, 4 th B Cross, 9 th A Main, RPC Layout, Vijaynagar, Bangalore-560040 State:
More informationVLSI Design Lab., Konkuk Univ. Yong Beom Cho LSI Design Lab
AVR Training Board-I V., Konkuk Univ. Yong Beom Cho ybcho@konkuk.ac.kr What is microcontroller A microcontroller is a small, low-cost computeron-a-chip which usually includes: An 8 or 16 bit microprocessor
More informationZKit-51, 8051 Development Kit
ZKit-51, 8051 Development Kit User Manual 1.1, June 2011 This work is licensed under the Creative Commons Attribution-Share Alike 2.5 India License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/2.5/in/
More informationAKKON USB CONTROLLER BOARD
TN002 AKKON USB CONTROLLER BOARD USB Microcontroller board with the PIC18F4550 * Datasheet Authors: Gerhard Burger Version: 1.0 Last update: 20.01.2006 File: Attachments: no attachments Table of versions
More informationModtronix Engineering Modular Electronic Solutions SBC28DC. Single board computer for 28 pin DIP PICs
Modtronix Engineering Modular Electronic Solutions Single board computer for 28 pin DIP PICs Table of Contents 1 Introduction...2 2 Features...4 3 Expansion Connectors...5 3.1 Daughter Board Connectors...5
More informationDoc: page 1 of 6
Nanocon Reference Manual Revision: February 9, 2009 Note: This document applies to REV A-B of the board. 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The Nanocon board is
More informationGIE 8051 Mini Kit. User Manual
GIE 8051 Mini Kit User Manual www.gie.com.my Page 1 of 8 Content Features...3 Function Block...3 Development Setup...4 Jumper selection...4 Required Software...5 Install PL-2303 Driver (USB to Serial port)...5
More informationAVR-P development board Users Manual
AVR-P40-8515 development board Users Manual All boards produced by Olimex are ROHS compliant Revision A, January 2002 Copyright(c) 2009, OLIMEX Ltd, All rights reserved Page 1 INTRODUCTION: The AVR Microcontroller
More informationBreeze Board. Type A. User Manual.
Breeze Board Type A User Manual www.dizzy.co.za Contents Introduction... 3 Overview Top... 4 Overview Bottom... 5 Getting Started (Amicus Compiler)... 6 Power Circuitry... 7 USB... 8 Microcontroller...
More informationOmega MP. Multi-Programming Shield for Atmel Microcontrollers. User Manual
Omega MP Multi-Programming Shield for Atmel Microcontrollers User Manual Ω - Omega MCU Systems Copyright 2012 Contents Introduction...2 Omega MP main features:...2 Getting Started...3 Assumptions...3 1.
More informationElectronic Lock CodeLock AVR 1 DIY electronic door lock
Electronic Lock CodeLock AVR 1 DIY electronic door lock CodeLock AVR LCD CodeLock AVR electronic lock is realised with Atmel AVR micro-controller AT90S2313, ATtiny2313 or ATtiny45. 1 user code in the program
More informationDEVBOARD3 DATASHEET. 10Mbits Ethernet & SD card Development Board PIC18F67J60 MICROCHIP
DEVBOARD3 DATASHEET 10Mbits Ethernet & SD card PIC18F67J60 MICROCHIP Version 1.0 - March 2009 DEVBOARD3 Version 1.0 March 2009 Page 1 of 7 The DEVBOARD3 is a proto-typing board used to quickly and easily
More informationATHENA32 PIC32 Evaluation Board ATHENA32. Product Datasheet. Francesco Ficili Date 13/01/2019. Pag. 1
ATHENA32 Product Datasheet Author Francesco Ficili Date 13/01/2019 Status Released Pag. 1 Revision History Version Date Author Changes 1.0 13/01/2019 Francesco Ficili Initial Release. Pag. 2 SUMMARY 1.
More informationUser Manual For CP-JR ARM7 USB-LPC2148 / EXP
CP-JR ARM7 USB-LPC2148 / EXP 38 CR-JR ARM7 USB-LPC2148 which is a Board Microcontroller ARM7TDMI-S Core uses Microcontroller 16/32-Bit 64 Pin as Low Power type to be a permanent MCU on board and uses MCU
More informationAltera EP4CE6 Mini Board. Hardware User's Guide
Altera Hardware User's Guide 1. Introduction Thank you for choosing the! is a compact FPGA board which is designed based on device. It's a low-cost and easy-to-use platform for learning Altera's Cyclone
More informationARDUINO LEONARDO WITH HEADERS Code: A000057
ARDUINO LEONARDO WITH HEADERS Code: A000057 Similar to an Arduino UNO, can be recognized by computer as a mouse or keyboard. The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet).
More information