Telexir PCRF. Quick Start Guide. Product version: Document version: 1.1
|
|
- Clementine Boyd
- 5 years ago
- Views:
Transcription
1 Telexir PCRF Quick Start Guide Product version: Document version: 1.1 Telexir 2014
2 Revision History Date Version Author Revision Evgenia Martynyuk Document created Evgenia Martynyuk Minor corrections Telexir
3 Table of Contents Introduction... 4 Related Materials... 4 Abbreviations... 4 Policies Configuration Task Example... 5 Basic Task Description... 5 Network Architecture... 5 Information Flow... 6 Required Configuration... 6 Network Components Interaction... 6 Policies Configuration Steps DPI/P-GW Static Rules Configuration Result Telexir
4 Introduction Telexir PCRF Quick Start Guide Telexir PCRF is a standard compliant policy management solution that enables operator to dynamically control network elements with real-time policies based on service, subscriber or usage control. This step-by-step guide will help you to understand the essential principle of policy logic configuration of Telexir PCRF system. Related Materials 1. Installation Guide (Telexir PCRF Installation Guide.docx) 2. Administrator's Guide (Telexir PCRF Administrator's Guide.docx) 3. SPR Configuration Interface description (Telexir PCRF SPR Configuration Interface.docx) 4. Subscriber Management Interface description (Telexir PCRF Subscriber Management Interface.docx) 5. Policy Engine description (Telexir PCRF Policy Engine.docx) 6. Policy Library description (Telexir PCRF Policy Library.docx) 7. Standards: a) IETF RFC 3588 Diameter Base Protocol b) IETF RFC 4006 Diameter Credit Control Application c) 3GPP TS Policy and Charging Control over Gx Reference Point. Rel. 9 d) 3GPP TS Charging Rule Provisioning over Gx Interface. Rel. 9 Abbreviations Abbreviation AAA ACR BSS CRM DDF DPI O&M SPR Meaning Authentication Authorization Accounting Access Control Router Business Support System Customer Relationship Management Data Distribution Function Deep Packet Inspection Operations and Maintenance Subscriber Profile Repository Telexir
5 Basic Task Description Policies Configuration Task Example Telexir PCRF is able to work with many BSS tariffs, subscriber ID types (IMSI, MSISDN), different DPI/P-GW. Also can perform congestion management, traffic accumulation, and other operations. Telexir PCRF can be geographically distributed or be installed as a stand-alone cluster/node. This document covers only basic task of Telexir PCRF, where: PCRF clusters are installed only in two regions: Region_1 and Region_2. And the subscriber doesn t change the location (no moving from one region to another in this case). Only two BSS tariffs are used. Simple policy selection configuration is performed. Basic Task Description It is required to configure network core in such a way that the subscriber could have an access to network recourse according to the tariff which was chosen by the subscriber in the Self-Care portal. Available for the subscriber tariffs: Internet_unlim and Internet_512 Subscriber s ID (IMSI) is The subscriber is located in region Region_1. Network Architecture The following network architecture is used for the task: Figure 1. Example Network Architecture BSS (Self-Care Portal) HTTP smile.ddf1.com smile.ddf2.com DDF DDF HTTP HTTP Region_1 PCRF PCRF msk-pcrf1.scartel.dc msk-pcrf2.scartel.dc PCRF PCRF Region_2 Gx test.ugw01.g4lab.ru test.ugw02.g4lab.ru Gx RAN Traffic DPI/P-GW Internet DPI/ P-GW Telexir
6 Telexir PCRF Quick Start Guide In the figure above (Figure 1) we can see Telexir PCRF system that contains DDF cluster and two PCRF clusters in two regions. Two regions are taken to show that Telexir PCRF system can be geographically distributed. In case if only one PCRF cluster is required the DDF component is not need. All management command from BSS will be sent directly to PCRF cluster. All further actions will be performed with DDF and regional PCRF in Region_1. Information Flow When the subscriber chooses an Internet tariff the following information flow will be generated: Figure 2. Information Flow BSS tariff DDF service PCRF service/policy DPI/P-GW rule Subscriber 1. When the subscriber chooses a specified tariff the BSS sends management command to DDF to assign a specified service to the subscriber. 2. When the management command from BSS is received then DDF resend this command to regional PCRF, where the subscriber is attached to the network. 3. When the specified service is assigned to the subscriber, PCRF selects a policy according to the service information. When the policy is chosen then a corresponding rule is sent to DPI/P-GW. 4. DPI/P-GW gives access to the network resources according to a received rule. Important to understand: BSS operates with tariffs. DDF operates with services. PCRF operates with services and policies. DPI/P-GW operates with rules. Required Configuration To complete the task configuration of the following must be performed: Network components interaction Policies on PCRF Static Rules on DPI/P-GW Network Components Interaction It is needed to configure the network component interaction. The configuration is performed in O&M Console: Connectivity information of DDF with all PCRF clusters must be set in DDF O&M Console. Connectivity information of PCRF and DPI/P-GW must be set in PCRF O&M Console of regional PCRF cluster where this DPI/P-GW is used. Telexir
7 Required Configuration When PCRF and DPI/P-GW connectivity information is set then CER/CEA, DWR/DWA messages exchange is possible. DDF O&M Console Configuration DDF O&M is available at: Specify information about all system clusters and nodes by doing the following steps: 1. Open DDF O&M console in a browser tab and choose the primary DDF node in the Server List. 2. Choose Configuration -> Network Topology -> Clusters in the Operations block. Only DDF cluster information will be displayed. 3. Click Add button in appeared Clusters table and set required parameters for all PCRF clusters. Region_1 PCRF cluster information example: Parameter Description Cluster ID 2 Cluster Role 3 Cluster SSR Subscription 0 Cluster Name First Regional PCRF Description Cluster in Region 1 Important Make sure that ID of each cluster of the Telexir PCRF system in unique within the whole system configuration. 4. Go to Configuration -> Network Topology -> Peers. Click Add button in appeared Peers table and set required parameters for all PCRF nodes. Region_1 nodes information example: Primary Region_1 node Secondary Region_1 nodes Peer ID 21 Peer ID 22 Cluster ID 2 Cluster ID 2 Dialect 0 (Default) Dialect 0 (Default) Host msk-pcrf1.scartel.dc Host msk-pcrf2.scartel.dc Realm scartel.dc Realm scartel.dc Address msk-pcrf1.scartel.dc Address msk-pcrf2.scartel.dc Port 3868 Port 3868 Protocol 6 (TCP) Protocol 6 (TCP) Auto Connect 1 Auto Connect 0 Mandatory 1 Mandatory 1 Priority 0 Priority 1 Important Secondary node priority must be set lower than primary node priority for each PCRF cluster (0 is the highest priority). For example, set Priority=1 for secondary and Priority=0 for the primary node. Telexir
8 Telexir PCRF Quick Start Guide Figure 3. DDF O&M Console Peers Information Configuration Example 5. Go to Configuration -> Network Topology ->HTTP Peers. Click Add button in appeared HTTP Peers table and set required parameters for all PCRF nodes. Information example: Primary Region_1 node Secondary Region_1 nodes Cluster ID 2 Cluster ID 2 Peer ID 21 Peer ID 22 HTTP address msk-pcrf1.scartel.dc HTTP address msk-pcrf2.scartel.dc HTTP port 80 HTTP port 80 This table is used by DDF to send management HTTP requests to PCRF nodes. PCRF O&M Console Configuration PCRF O&M is available at: Specify information about all clusters and nodes this cluster interacts with via Diameter protocol by doing the following steps: 1. Open PCRF O&M console in a browser tab. 2. Choose Configuration -> Network Topology -> Clusters in the Operations block. Click Add button to add information about all PCEF clusters this cluster interact with. DPI/P-GW cluster information example: Parameter Description Cluster ID 7 Role PCEF Cluster SSR Subscription 0 (Cluster SSR NONE) Name Huawei UGW Description Huawei UGW Important Make sure that ID of each cluster of the Telexir PCRF system in unique within the whole system configuration. 3. Choose Configuration -> Network Topology -> Peers. Check if Peer IDs of this PCRF cluster nodes are the same as were set in DDF O&M Console Peers table. Click Add button to add information about all cluster nodes this cluster interact with via Diameter interface (PCEF clusters and DDF cluster). Telexir
9 Required Configuration DPI/P-GW nodes information example: Primary DPI/P-GW node Secondary DPI/P-GW node Peer ID 78 Peer ID 79 Cluster ID 7 Cluster ID 7 Dialect 0 (Default) Dialect 0 (Default) Host test.ugw01.g4lab.ru Host test.ugw02.g4lab.ru Realm g4lab.ru Realm g4lab.ru Address test.ugw01.g4lab.ru Address test.ugw02.g4lab.ru Port 3868 Port 3868 Protocol 6 (TCP) Protocol 6 (TCP) Priority 0 Priority 1 Mandatory 1 (Enabled) Mandatory 1 (Enabled) Enabled 1 (Enabled) Enabled 1 (Enabled) Important Secondary node priority must be set lower than primary node priority for each PCRF cluster (0 is the highest priority). For example, set Priority=1 for secondary and Priority=0 for the primary node. Figure 4. PCRF O&M Console DPI/P-GW Information Configuration Example 4. Go to Configuration -> Server Settings and set default_region parameter value for this PCRF cluster. For example, default_region=region_1. Telexir
10 Policies Configuration Steps Telexir PCRF Quick Start Guide When required information is set in the O&M console of DDF and PCRF clusters the policies configuration can be performed. Figure 5. Policies Configuration BSS (Self-Care Portal) HTTP 1 DDF DDF 2 smile.ddf1.com smile.ddf2.com HTTP Region_1 PCRF PCRF msk-pcrf1.scartel.dc msk-pcrf2.scartel.dc engine.lua Policies 3 rules.xml DPI Rules 4 Gx test.ugw01.g4lab.ru test.ugw02.g4lab.ru RAN Traffic DPI DPI/P-GWP-GW Internet 1. On DDF (or on PCRF if DDF is not used) provide services information to the Service Dictionary by SPR Configuration Interface method addserviceinfo. For Internet_unlim tariff the following information will be provided (Full_Access_Unlim service: Unlim&description=full access internet connection with unlimited speed For Internet_512 tariff the following information will be provided (Full_Access_512 service): 2&description=full access internet connection with 512kbps speed Telexir
11 Required Configuration Important The method addserviceinfo adds information only to the Service Dictionary. It doesn t assign a service to a subscriber and serves only for validation purposes of new BSS services. Information For more information about the SPR Configuration Interface, refer to "Telexir PCRF SPR Configuration Interface.docx". 2. On DDF (or on PCRF if DDF is not used) provide information about the subscriber profile, which the services will be applied to, by Subscriber Management Interface method addsubscriber. Request example: _subscriber When the subscriber profile is created now it is possible to assign BSS services to this subscriber. Important When subscriber chooses a tariff in the Self-Care Portal then the BSS automatically assigns an appropriate service to this subscriber by sending Subscriber Management Interface method addservice to DDF. Request example: =Full_Access_Unlim Information For more information about the Subscriber Management Interface, refer to "Telexir PCRF Subscriber Management Interface.docx". 3. On regional PCRF add policy selection algorithm for new services in engine.lua. In our case the following script will be created: --require("etc/pcrf/config/lua/pcrf_module") function GxSelectPolicy() if (is_service_active("full_access_unlim")) then set_policy("policy_full_access_unlim") log_write(string.format("policy: '%s' selected for %s", get_policy(0), get_subscriber_id())) return 0 end if (is_service_active("full_access_512")) then Telexir
12 Telexir PCRF Quick Start Guide set_policy("policy_full_access_512") log_write(string.format("policy: '%s' selected for %s", get_policy(0), get_subscriber_id())) return 0 end end Policy selection algorithm (engine.lua) is launched when the subscriber attaches to the network, or when updated information is provisioned from BSS. When engine.lua is launched subscriber services are analyzed (is_service_active() function) and based on the result policies are chosen (set_policy() function). Information For more information about policy selection algorithm configuration, refer to "Telexir PCRF Policy Engine.docx" 4. On regional PCRF configure mapping of PCRF policies and DPI/P-GW rules in rules.xml file. In our case the following description will be added: <?xml version="1.0" encoding="utf-8"?> <PolicyDef xmlns=" version="1"> <Policy Name="policy_full_access_unlim"> <Huawei> <Rules> <Charging-Rule-Base-Name Value="npUnlim_up"/> </Rules> </Huawei> </Policy> <Policy Name="policy_full_access_512"> <Huawei> <Rules> <Charging-Rule-Base-Name Value="np512_up"/> </Rules> </Huawei> </Policy> </PolicyDef> An appropriate rule will be applied on subscriber session on DPI/P-GW when a PCRF policy is chosen for the subscriber. Rules describe specified AVPs (bearer configuration, QCI, bandwidth) that will be sent to DPI/P-GW. Information For more information about static DPI/P-GW rules configuration on PCRF, refer to "Telexir PCRF Policy Libpary.docx". DPI/P-GW Static Rules Configuration Static rules configuration on DPI/P-GW must be performed by the network specialist according to desired traffic management. In our case, it is required to have two static rules. For example: Telexir
13 Result npunlim_up. Static rule that shapes traffic according to Internet_unlim tariff in BSS np512_up. Static rule that shapes traffic according to Internet_512 tariff in BSS Result When all required configuration is performed the tariffs become available for the subscriber. Let s see the following example scenario: 1. Subscriber chooses Internet_unlim tariff before starting his Internet session. 2. Subscriber starts the Internet session. 3. Subscriber chooses Internet_512 tariff in real time. Figure 6. Example Scenario UE DPI/P-GW PCRF BSS addservice=full_ Access_Unlim 1 Attach Gx CCR-I Subscriber-id: Framed-IP-Address: Policy Selection Policy: policy_full_access_unlim 2 Gx CCA-I 3 Charging-Rule-Install: Charging-Rule-Name: "npunlim_up" addservice=full_ Access_ Policy Selection Policy: policy_full_access_512 Gx RAR 6 Modify bearer Charging-Rule-Remove: Charging-Rule-Name: "npunlim_up" Charging-Rule-Install: Charging-Rule-Name: "np512_up" Telexir
14 Telexir PCRF Quick Start Guide 1. When subscriber chooses Internet_unlim tariff before starting his Internet session the following command is sent to DDF ull_access_unlim 2. After subscriber device attach the following policy is chosen by PCRF: policy_full_access_unlim 3. the following rule is sent to DPI/P-GW in AVP Charging-Rule-Install: npunlim_up The following information is displayed in the log in CCA-I message: Figure 7. Log Message Example (CCA-I) Information To see log messages in real time execute command in the command line: lv 4. When subscriber chooses Internet_512 tariff in real time the following command is sent to DDF ull_access_ the following policy is chosen by PCRF: policy_full_access_ the following rule is sent to DPI/P-GW in AVP Charging-Rule-Install: np512_up The following information will be displayed in the log in the RAR message: Telexir
15 Result Figure 8. Log Message Example (RAR) Information It also possible to see Diameter traces, which are available at: Figure 9. Traces Example Telexir
16 Figure 10. Trace Message Example Telexir PCRF Quick Start Guide Telexir
Yota PCRF. Installation Guide. Product version: 3.6 Document version: 3.1 Status: development
Yota PCRF Installation Guide Product version: 3.6 Document version: 3.1 Status: development Yota 2013 Revision History Date Version Author Revision 11.01.2013 1.0 Evgenia Martynyuk Document created. 28.03.2013
More informationYota PCRF. Subscriber Management Interface Description. Product version: 3.6 Document version: 2.5 Status: development
Yota PCRF Subscriber Management Interface Product version: 3.6 Document version: 2.5 Status: development Yota 2013 Revision History Date Version Author Revision 06.06.2011 0.1 Max Kumskoy Document created
More information3GPP TS V ( )
Technical Specification 3rd Generation Partnership Project; Technical Specification Group Core Network and Terminals; Policy and charging control signalling flows and Quality of Service (QoS) parameter
More informationPCC (Policy and Charging Control) In Mobile Data. EFORT
PCC (Policy and Charging Control) In Mobile Data EFORT http://www.efort.com By implementing policy and charging control (PCC) procedures in their mobile data network, mobile service providers are able
More informationCPS Central Administration Guide, Release
CPS Central Administration Guide, Release 11.0.0 First Published: Nov 02, 2016 Last Modified: Nov 02, 2016 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com
More informationDIAMETER Support in BNG
DIAMETER provides a base protocol that can be extended in order to provide authentication, authorization, and accounting (AAA) services to new access technologies. This chapter provides information about
More informationOracle Communications Service Broker
Oracle Communications Service Broker Policy Controller Implementation Guide Release 6.0 E23528-02 March 2012 Oracle Communications Service Broker Policy Controller Implementation Guide, Release 6.0 E23528-02
More informationIP Services Gateway Overview
This chapter provides an overview of the IP Services Gateway (IPSG) product. This chapter covers the following topics: Introduction, page 1 How it Works, page 2 In-line Services, page 4 Enhanced Feature
More informationETSI TS V ( )
Technical Specification Universal Mobile Telecommunications System (UMTS); LTE; Policy and Charging Control (PCC) over Gx/Sd reference point () 1 Reference RTS/TSGC-0329212vb60 Keywords LTE,UMTS 650 Route
More informationDiameter Configuration
, page 1 Diameter Stack Configuration, page 18 Diameter Agents, page 28 Diameter Clients, page 32 Diameter Defaults, page 58 Rule Retry Profiles, page 80 The section allows for the configuration of the
More informationRx Services. Overview
Overview, page 1 VoLTE, page 2 Dynamic Rule Naming (Multiple Dedicated Bearer QoS), page 16 QoS Selection, page 17 Dynamic QoS, page 17 SRVCC, page 30 NPLI (Access Network), page 30 Dynamic PCC (MOG),
More informationRx Services. Overview. VoLTE
Overview, on page 1 VoLTE, on page 1 Dynamic Rule Naming (Multiple Dedicated Bearer QoS), on page 15 QoS Selection, on page 16 Dynamic QoS, on page 16 SRVCC, on page 28 NPLI (Access Network), on page 28
More informationETSI TS V ( ) Technical Specification
TS 129 213 V10.2.0 (2011-06) Technical Specification Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control signalling
More informationSouthbound Rx Interface
Overview, page 1 Diameter Adaptor Connectivity, page 1 Protocol Support, page 2 Diameter Connection Establishment, page 2 Diameter Base RFC Compliance, page 2 Rx Protocol Message Formats, page 2 Cisco
More information- Page 1 of 12 -
PGW Functional Tester 11.0.0 Release Notes - Page 1 of 12 - Introduction The PGW Functional Tester is an automated test suite for testing the correctness of an implementation of LTE PDN Gateway (PGW) according
More informationA Convergent and Configurable Policy and Charging Architecture for Integrated Mobile Services
International Journal of Computer Science and Telecommunications [Volume 6, Issue 7, July 2015] 1 ISSN 2047-3338 A Convergent and Configurable Policy and Charging Architecture for Integrated Mobile Services
More informationGx Interface Support. Rel. 7 Gx Interface
This chapter provides information on configuring Gx interface to support policy and charging control for subscribers. The IMS service provides application support for transport of voice, video, and data
More informationSupported Message Formats
APPENDIXA Revised: July 27, 2012, Supported Diameter Messages The messages sent and received by the diameter infrastructure are as follows: Capability Exchange Request (CER) Sent upon new connection establishment
More informationQuality of Service, Policy and Charging
Quality of Service, Policy and Charging Contents 1. Policy and Charging Control! 2. Session Management Procedures! 3. Charging and Billing 1. Policy and Charging Control 1.1 Introduction! 1.2 Quality of
More informationAll-IP Core Network Multimedia Domain
GPP X.S00-0-0 Version.0 Date: December 0 All-IP Core Network Multimedia Domain Service Based Bearer Control Ty Interface Stage COPYRIGHT NOTICE GPP and its Organizational Partners claim copyright in this
More informationREFERENCE ARCHITECTURE FOR END-TO-END QOS IN HETEROGENEOUS WIRELESS NETWORK ENVIRONMENTS
REFERENCE ARCHITECTURE FOR END-TO-END QOS IN HETEROGENEOUS WIRELESS NETWORK ENVIRONMENTS Sandra Frei 1, 2, Woldemar Fuhrmann 3, Andreas Rinkel 2 and Bogdan Ghita 1 1 Centre for Information Security and
More informationThis chapter describes StarOS support for the NetLoc for WiFi EPC feature on the P-GW and SAE-GW.
This chapter describes StarOS support for the feature on the P-GW and SAE-GW. Feature Description, page 1 How It Works, page 1 Configuring the Feature, page 3 Monitoring and Troubleshooting the Feature,
More informationETSI TS V9.3.0 ( ) Technical Specification
TS 129 212 V9.3.0 (2010-06) Technical Specification Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control over Gx reference point (3GPP TS 29.212 version 9.3.0 Release 9)
More informationETSI TS V ( )
Technical Specification Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control signalling flows and Quality of Service
More information3GPP TS V ( )
TS 29.219 V11.2.0 (2012-09) Technical Specification 3rd Generation Partnership Project; Technical Specification Group Core Network and Terminals; Policy and Charging Control: Spending Limit Reporting over
More information3GPP TS V9.3.0 ( )
TS 29.212 V9.3.0 (2010-06) Technical Specification 3rd Generation Partnership Project; Technical Specification Group Core Network and Terminals; Policy and Charging Control over Gx reference point (Release
More informationGTP-based S2b Interface Support on the P-GW and SAEGW
GTP-based S2b Interface Support on the P-GW and SAEGW This chapter describes the GTP-based S2b interface support feature on the standalone P-GW and the SAEGW. Feature, page 1 How the S2b Architecture Works,
More informationPolicy Control Configuration Mode Commands
Policy Control Configuration Mode Commands Policy Control Configuration mode is used to configure the Diameter dictionary, origin host, host table entry and host selection algorithm for IMS Authorization
More informationPolicy Control Configuration Mode Commands
Policy Control Configuration Mode Commands Policy Control Configuration mode is used to configure the Diameter dictionary, origin host, host table entry and host selection algorithm for IMS Authorization
More information- Page 1 of 8 -
PGW Functional Tester 10.0.0 Release Notes - Page 1 of 8 - Introduction The PGW Functional Tester is an automated test suit for testing the correctness of an implementation of LTE PDN Gateway (PGW) according
More information5G Non Standalone for SAEGW
This chapter describes the 5G Non Standalone (NSA) feature in the following sections: Feature Summary and Revision History, on page 1 Feature Description, on page 2 How It Works, on page 3 Configuring
More informationIxLoad EPC Diameter Testing
IxLoad EPC Diameter Testing IxLoad is a full-featured layer 4-7 test application that provides real-world traffic emulation testing of voice, video, and data networks and components. IxLoad simultaneously
More informationPolicy Management & On-line Charging - Standards Based or Proprietary Solutions?
Policy Management & On-line Charging - Standards Based or Proprietary Solutions? Today there is huge hype around policy management, and most notably around data traffic policy management. In its simple
More informationETSI TS V ( )
TS 123 203 V10.8.0 (2012-11) Technical Specification Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control architecture
More informationETSI TS V ( )
TS 129 214 V11.6.0 (2012-10) Technical Specification Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control over Rx reference point (3GPP TS 29.214 version 11.6.0 Release 11)
More informationSupported AVPs in DCCA Messages
CHAPTER B The following sections of this appendix list the vendor-specific attribute value pairs (AVPs) supported by the Cisco GGSN in Diameter Credit Control Application (DCCA) Credit-Control-Request
More informationshow ims-authorization
This chapter describes the outputs of the command. policy-control statistics, page 1 policy-gate status full, page 12 policy-gate counters all, page 13 servers, page 14 service name, page 15 service name
More informationEnabling Agile Service Chaining with Service Based Routing
Enabling Agile Service Chaining with Service Based Routing Contents Abstract...1 1. Introduction...1 2. Huawei s SBR Solution for Agile Service Chaining...3 2.1. Architecture Overview...3 2.2. Multi-Dimensional
More information4G Network Emulator. The Valid8 team will go above and beyond to get the job done. Jordan C., Network Integrity Lab & Certification Services, BoA
4G Network Emulator The Valid8 4G Network Emulator provides an all-in-one, cost-effective and ultra-portable 4G network for demonstration, testing and training purposes. There are options available to
More informationETSI TS V8.5.0 ( ) Technical Specification
TS 129 214 V8.5.0 (2009-06) Technical Specification Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control over Rx reference point (3GPP TS 29.214 version 8.5.0 Release 8)
More information5G NSA for MME. Feature Summary and Revision History
Feature Summary and Revision History, on page 1 Feature Description, on page 2 How It Works, on page 5 Configuring, on page 10 Monitoring and Troubleshooting, on page 13 Feature Summary and Revision History
More information3GPP TS V ( )
TS 29.214 V8.18.0 (2013-12) Technical Specification 3rd Generation Partnership Project; Technical Specification Group Core Network and Terminals; Policy and Charging Control over Rx reference point (Release
More informationITU-T Q Signalling architecture and requirements for IP-based short message service over ITU-T defined NGN
I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T Q.3053 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (03/2017) SERIES Q: SWITCHING AND SIGNALLING, AND ASSOCIATED MEASUREMENTS
More informationRE-ARCHITECTING THE GI LAN OPTIMIZE & MONETIZE MOBILE BROADBAND. Bart Salaets Solution Architect
RE-ARCHITECTING THE GI LAN OPTIMIZE & MONETIZE MOBILE BROADBAND Bart Salaets Solution Architect Today s Gi LAN is static and inflexible DNS PCRF AAA OCS CSCF RADIUS, Diameter, DNS, SIP Control Plane Services
More informationResource authorization in IMS with known multimedia service adaptation capabilities
Resource authorization in IMS with known multimedia service adaptation capabilities Tomislav Grgic, Vedran Huskic, and Maja Matijasevic University of Zagreb, Faculty of Electrical Engineering and Computing,
More informationImpact of the LTE Migration for MVNOs
Impact of the LTE Migration for MVNOs A Whitepaper Converting Diameter to SS7 protocols (CAMEL/SOAP/RADIUS/WIN/GSM MAP) and other proprietary protocols October 2012 By Dan Wonak Director of Marketing Abstract:
More informationTest-king QA
Test-king.600-212.70.QA Number: 600-212 Passing Score: 800 Time Limit: 120 min File Version: 6.1 http://www.gratisexam.com/ Provide the highest amount of valid questions with correct answers. This VCE
More informationEnhanced Priority for emps Based Wireless Priority Services
Oracle COMMUNICATIONS Policy Management Feature Activation Release 12.2 Enhanced Priority for emps Based Wireless Priority Services E82613-01 February 2017 Copyright 2017 Oracle and/or its affiliates.
More information3GPP TS V7.2.0 ( )
TS 23.203 V7.2.0 (2007-03) Technical Specification 3rd Generation Partnership Project; Technical Specification Group Services and System Aspects; Policy and charging control architecture (Release 7) GLOBAL
More information5G NSA(Non-Standalone Architecture)
This chapter describes the following topics: Feature Summary and Revision History, page 1 Feature Description, page 2 How It Works, page 2 Configuring DCNR, page 5 Monitoring and Troubleshooting, page
More informationPassguide q
Passguide 600-210 67q Number: 600-210 Passing Score: 800 Time Limit: 120 min File Version: 12.5 http://www.gratisexam.com/ 600-210 Implementing Cisco Service Provider Mobility UMTS Networks These are the
More informationDiameter Failure Handling Template Configuration Mode Commands
Diameter Failure Handling Template Configuration Mode Commands Diameter Failure Handling Template Configuration Mode is accessed from the Global Configuration Mode. This mode allows an operator to configure
More informationETSI TS V6.2.0 ( )
Technical Specification Universal Mobile Telecommunications System (UMTS); Charging rule provisioning over Gx interface () 1 Reference RTS/TSGC-0329210v620 Keywords UMTS 650 Route des Lucioles F-06921
More informationPolicy Management Configuration Management Platform
Policy Management Configuration Management Platform Wireless User's Guide 910-6402-001 Revision A June 2012 Copyright 2012 Tekelec. All Rights Reserved. Printed in USA. Legal Information can be accessed
More informationETSI TS V ( )
TS 129 215 V12.9.0 (2018-07) TECHNICAL SPECIFICATION Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Policy and Charging Control (PCC)
More informationSCE- Subscriber API. SM-API Adapter. Adapter. Diameter Stack
CHAPTER 4 Revised: October 25, 2011, Introduction The Gy interface is used for reporting and charging. In SCA BB, support of the Gy interface is divided into two components. The two components reside on
More informationETSI TS V ( )
TS 129 214 V12.5.0 (2014-10) TECHNICAL SPECIFICATION Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control over Rx reference point (3GPP TS 29.214 version 12.5.0 Release 12)
More informationETSI TS V ( )
TS 129 212 V14.5.0 (2017-10) TECHNICAL SPECIFICATION Universal Mobile Telecommunications System (UMTS); LTE; Policy and Charging Control (PCC); Reference points (3GPP TS 29.212 version 14.5.0 Release 14)
More informationTemporary Document Page 2 - switches off, the allocated resources and PCC rules information of PDN GWs used by the UE in non- network will not be dele
Temporary Document Page 1 - TSG SA WG2 Architecture S2#58 S2-072558 25-29 June 2007 Orlando, FL, USA Source: Huawei Title: Attach Type in attach procedure Document for: Discussion / Approval Agenda Item:
More informationA Flow Label Based QoS Scheme for End-to-End Mobile Services
A Flow Label Based QoS Scheme for End-to-End Mobile Services Tao Zheng, Lan Wang, Daqing Gu Orange Labs Beijing France Telecom Group Beijing, China e-mail: {tao.zheng; lan.wang; daqing.gu}@orange.com Abstract
More informationOverview of GPRS and UMTS
CHAPTER 1 This chapter briefly introduces the 2.5G General Packet Radio Service (GPRS) and the 3G Universal Mobile Telecommunications System (UMTS) technologies, and their implementation in Cisco Gateway
More informationThis chapter provides configuration information for the HRPD Serving Gateway (HSGW).
This chapter provides configuration information for the HRPD Serving Gateway (HSGW). Important Information about all commands in this chapter can be found in the Command Line Interface Reference. Because
More informationThis chapter provides configuration information for the HRPD Serving Gateway (HSGW).
This chapter provides configuration information for the HRPD Serving Gateway (HSGW). Important Information about all commands in this chapter can be found in the Command Line Interface Reference. Because
More informationMOG Installation, Configuration, and Upgrade
MOG Installation, page 1 Plugin Configuration, page 2 vpas Configuration, page 5 CDR Filter Configuration, page 9 Service Configuration, page 10 Administrator Database Configuration, page 14 Geographic
More informationImplementing a Session Aware Policy Based Mechanism for QoS Control in LTE
RESEARCH ARTICLE OPEN ACCESS Implementing a Session Aware Policy Based Mechanism for QoS Control in LTE Zouhair Bazzal, AbdelMehsen Ahmad, Ibrahim El Bitar, Ali Ghouwayel, and Hussein Hijazi School of
More informationOracle Communications Diameter Signaling Router
Oracle Communications Diameter Signaling Router Licensing Information User Manual Release 6.0.1 E62996 Revision 01 April 2015 Copyright 2011,2015 Oracle and/or its affiliates. All rights reserved. Oracle
More informationRouting Behind the Mobile Station on an APN
Feature Description How It Works The routing behind the Mobile Station(MS) feature enables the routing of packets to IPv4 addresses that do not belong to the PDN Session (the MS), but exist behind it.
More informationClosed Subscriber Groups
Feature Description, page 1 How It Works, page 1 Configuring, page 6 Monitoring and Troubleshooting, page 7 Feature Description The MME provides support for (CSG). This enables the MME to provide access
More informationMultimedia Broadcast and Multicast Service
This chapter provides information on (MBMS) functionality on GGSN. The product Administration Guides provide examples and procedures for configuration of basic services on the system. It is recommended
More information5G Non Standalone. Feature Summary and Revision History
This chapter describes the (NSA) feature in the following sections: Feature Summary and Revision History, on page 1 Feature Description, on page 2 Feature Summary and Revision History Summary Data Applicable
More informationStateless 4V6. draft-dec-stateless-4v6. September 2011
Stateless 4V6 draft-dec-stateless-4v6 September 2011 1 Operator s have an IPv6 network in production Limited Public IPv4 or exhausted Desire/intent to move to fully to IPv6 (at least operationally) End
More informationETSI TS V (201
TS 129 214 V13.6.0 (201 16-08) TECHNICAL SPECIFICATION Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control over Rx referencee point (3GPP TS 29.214 version 13.6.0 Release
More informationEAGLE XG Diameter Signaling Router
EAGLE G Diameter Signaling Router Policy DRA User Guide 910-6820-001 Revision A July 2013 Copyright 2013 Tekelec. All Rights Reserved. Printed in USA. Legal Information can be accessed from the Main Menu
More informationDomains. Overview. Figure 1: APN Profile Rules. CPS Mobile Configuration Guide, Release
Overview, page 1 Strategies for Defining, page 2 Defining a Domain, page 2 Creating a Custom Reference Data (CRD) table for APN mapping, page 19 Validation Steps, page 23 Overview The Access Point Network
More informationRf Interface Support. Introduction
This chapter provides an overview of the Diameter Rf interface and describes how to configure the Rf interface. Rf interface support is available on the Cisco system running StarOS 10.0 or later releases
More informationOracle Communications Policy Management
Oracle Communications Policy Management Concepts for Wireless Networks Release 12.1 ORACLE WHITE PAPER NOVEMBER 2015 i Oracle Communications Policy Management Concepts for Wireless TABLE OF CONTENTS INTRODUCTION...
More informationCisco Policy Suite Mobile Configuration Guide
Cisco Policy Suite 5.5.2 Mobile Configuration Guide Version 5.5.2 November 27, 2013 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers
More informationDAY 2. HSPA Systems Architecture and Protocols
DAY 2 HSPA Systems Architecture and Protocols 1 LTE Basic Reference Model UE: User Equipment S-GW: Serving Gateway P-GW: PDN Gateway MME : Mobility Management Entity enb: evolved Node B HSS: Home Subscriber
More informationP-GW Service Configuration Mode Commands
Service Configuration Mode Commands The (PDN Gateway) Service Configuration Mode is used to create and manage the relationship between specified services used for either GTP or PMIP network traffic. Exec
More informationCisco Quantum Policy Suite for Mobile
Data Sheet Cisco Quantum Policy Suite for Mobile The Cisco Quantum Policy Suite for Mobile is a proven carrier-grade policy, charging, and subscriber data management solution that enables service providers
More informationHSS and PCRF Based P-CSCF Restoration Support
This feature enables support for HSS-based and PCRF-based P-CSCF restoration that helps to minimize the time a UE is unreachable for terminating calls after a P-CSCF failure. Feature Description, page
More informationETSI TS V ( )
TS 129 214 V14.6.0 (2018-01) TECHNICAL SPECIFICATION Universal Mobile Telecommunications System (UMTS); LTE; Policy and charging control over Rx reference point (3GPP TS 29.214 version 14.6.0 Release 14)
More informationType of Service/Traffic Class Configuration for Predefined Rules
Type of Service/Traffic Class Configuration for Predefined Rules Feature Summary and Revision History, page 1 Feature Description, page 2 How It Works, page 2 Configuring the TOS/Traffic Class for Predefined
More informationMessage Priority Indication over GTPC
This chapter describes the following topics: Feature Summary and Revision History, page 1 Feature Description, page 2 How It Works, page 4 Configuring the Message Priority over GTP Feature, page 6 Monitoring
More informationConfigure Failure Handling and Server Unreachable Mechanisms for OCS Failure Resolution on the ASR5K
Configure Failure Handling and Server Unreachable Mechanisms for OCS Failure Resolution on the ASR5K Document ID: 118993 Contributed by Shashank Varshney, Cisco TAC Engineer. Jun 02, 2015 Contents Introduction
More informationLTE Data Roaming over IPX Service Schedule
INTERNATIONAL INTERCONNECTION FORUM FOR SERVICES OVER IP (www.i3forum.org) (i3 FORUM) Source: Workstream Technical Aspects, Service Requirements i3 forum keyword: LTE Data Roaming, IPX LTE Data Roaming
More informationDiameter, Meet Your Future
, Meet Your Future The Dialogic Helix The Helix (HSC) raises the bar for functionality by combining unparalleled multiprotocol Interworking Functionality (IWF) and high-availability Edge Agent (DEA) and
More informationOCS Module Description v
OCS Module Description v. 18001 itms OCS Module The itms OCS Module handles online charging and control of Data, Voice and messaging services for mobile networks. It is flexible enough to manage the same
More informationEnhanced MBR and APR-AMBR Enforcement Support
Enhanced MBR and APR-AMBR Enforcement Support Feature Summary and Revision History, page 1 Feature Description, page 2 How It Works, page 2 Configuring MBR and APN-AMBR Enforcement, page 4 Monitoring and
More informationOnline Mediation Controller - Basic Admin 2-1
Online Mediation Controller - Basic Admin 2-1 Online Mediation Controller - Basic Admin 2-2 Online Mediation Controller - Basic Admin 2-3 Terminology AAA - Authentication Authorization Accounting AVP -
More informationTR-300 Policy Convergence for Next Generation Fixed and 3GPP Wireless Networks
TECHNICAL REPORT TR-300 Policy Convergence for Next Generation Fixed and 3GPP Wireless Networks Issue: 1 Issue Date: September 2014 The Broadband Forum. All rights reserved. Notice The Broadband Forum
More informationMulti-Protocol Routing Agent User Guide Revision A March 2013
Policy Management Multi-Protocol Routing Agent User Guide 910-6648-001 Revision A March 2013 Copyright 2013 Tekelec. All Rights Reserved. Printed in USA. Legal Information can be accessed from the Main
More informationRESTCOMMONE. jdiameter. Copyright All Rights Reserved Page 2
RESTCOMMONE jdiameter Copyright All Rights Reserved Page 2 RestcommONE Core Components RestcommOne Connect Visual Designer Web Browser WebRTC SDK s Mobile WebRTC SDK s RESTful API Layer RestcommOne Telecom
More informationPolicy Management Network Impact Report
Oracle Communications Policy Management Release 12.4 E89546-01 May 2018 Oracle Communication Policy Management Copyright 2018, Oracle and/or its affiliates. All rights reserved. This software and related
More informationCPS MOG API Reference, Release
CPS MOG API Reference, Release 13.1.0 First Published: 2017-08-18 Last Modified: 2017-08-18 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com
More informationETSI TS V (201
TS 129 217 V13.2.0 (201 16-01) TECHNICAL SPECIFICATION Universal Mobile Telecommunications System (UMTS); LTE; Policy and Charging Control (PCC); Congestion reporting over Np reference point (3GPP TS 29.217
More informationOracle Communications Policy Management Configuration Management Platform Wireless User's Guide Release E71642 Revision 01
Oracle Communications Policy Management Configuration Management Platform Wireless User's Guide Release 12.1.2 E71642 Revision 01 June 2016 Oracle Communications Policy Management Configuration Management
More informationControl and Optimize Your 4G LTE Network with Diameter
DATASHEET What s Inside 2 Protect Your Network from Signaling Bursts 2 Ensure Reliable Network Performance 3 Integration with SS7 and Other Legacy Network Elements 4 High Scalability for Growing Networks
More informationP-GW Service Configuration Mode Commands
P-GW Service Configuration Mode Commands The P-GW (PDN Gateway) Service Configuration Mode is used to create and manage the relationship between specified services used for either GTP or PMIP network traffic.
More informationDomains. Overview. CPS Wi-Fi Configuration Guide, Release
Overview, page 1 General Tab, page 3 Provisioning Tab, page 6 Locations Tab, page 9 Advanced Rules Tab, page 10 Service Provider, page 12 Create a Default Domain, page 14 Create an Auto Provision Domain,
More information